summaryrefslogtreecommitdiffstats
path: root/drivers/block/acsi.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/block/acsi.c
downloadblackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
blackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/block/acsi.c')
-rw-r--r--drivers/block/acsi.c1829
1 files changed, 1829 insertions, 0 deletions
diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c
new file mode 100644
index 000000000000..ce933de48084
--- /dev/null
+++ b/drivers/block/acsi.c
@@ -0,0 +1,1829 @@
+/*
+ * acsi.c -- Device driver for Atari ACSI hard disks
+ *
+ * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
+ *
+ * Some parts are based on hd.c by Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+/*
+ * Still to in this file:
+ * - If a command ends with an error status (!= 0), the following
+ * REQUEST SENSE commands (4 to fill the ST-DMA FIFO) are done by
+ * polling the _IRQ signal (not interrupt-driven). This should be
+ * avoided in future because it takes up a non-neglectible time in
+ * the interrupt service routine while interrupts are disabled.
+ * Maybe a timer interrupt will get lost :-(
+ */
+
+/*
+ * General notes:
+ *
+ * - All ACSI devices (disks, CD-ROMs, ...) use major number 28.
+ * Minors are organized like it is with SCSI: The upper 4 bits
+ * identify the device, the lower 4 bits the partition.
+ * The device numbers (the upper 4 bits) are given in the same
+ * order as the devices are found on the bus.
+ * - Up to 8 LUNs are supported for each target (if CONFIG_ACSI_MULTI_LUN
+ * is defined), but only a total of 16 devices (due to minor
+ * numbers...). Note that Atari allows only a maximum of 4 targets
+ * (i.e. controllers, not devices) on the ACSI bus!
+ * - A optimizing scheme similar to SCSI scatter-gather is implemented.
+ * - Removable media are supported. After a medium change to device
+ * is reinitialized (partition check etc.). Also, if the device
+ * knows the PREVENT/ALLOW MEDIUM REMOVAL command, the door should
+ * be locked and unlocked when mounting the first or unmounting the
+ * last filesystem on the device. The code is untested, because I
+ * don't have a removable hard disk.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/genhd.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/major.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */
+typedef void Scsi_Device; /* hack to avoid including scsi.h */
+#include <scsi/scsi_ioctl.h>
+#include <linux/hdreg.h> /* for HDIO_GETGEO */
+#include <linux/blkpg.h>
+#include <linux/buffer_head.h>
+#include <linux/blkdev.h>
+
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_acsi.h>
+#include <asm/atari_stdma.h>
+#include <asm/atari_stram.h>
+
+static void (*do_acsi)(void) = NULL;
+static struct request_queue *acsi_queue;
+#define QUEUE (acsi_queue)
+#define CURRENT elv_next_request(acsi_queue)
+
+#define DEBUG
+#undef DEBUG_DETECT
+#undef NO_WRITE
+
+#define MAX_ERRORS 8 /* Max read/write errors/sector */
+#define MAX_LUN 8 /* Max LUNs per target */
+#define MAX_DEV 16
+
+#define ACSI_BUFFER_SIZE (16*1024) /* "normal" ACSI buffer size */
+#define ACSI_BUFFER_MINSIZE (2048) /* min. buf size if ext. DMA */
+#define ACSI_BUFFER_SIZE_ORDER 2 /* order size for above */
+#define ACSI_BUFFER_MINSIZE_ORDER 0 /* order size for above */
+#define ACSI_BUFFER_SECTORS (ACSI_BUFFER_SIZE/512)
+
+#define ACSI_BUFFER_ORDER \
+ (ATARIHW_PRESENT(EXTD_DMA) ? \
+ ACSI_BUFFER_MINSIZE_ORDER : \
+ ACSI_BUFFER_SIZE_ORDER)
+
+#define ACSI_TIMEOUT (4*HZ)
+
+/* minimum delay between two commands */
+
+#define COMMAND_DELAY 500
+
+typedef enum {
+ NONE, HARDDISK, CDROM
+} ACSI_TYPE;
+
+struct acsi_info_struct {
+ ACSI_TYPE type; /* type of device */
+ unsigned target; /* target number */
+ unsigned lun; /* LUN in target controller */
+ unsigned removable : 1; /* Flag for removable media */
+ unsigned read_only : 1; /* Flag for read only devices */
+ unsigned old_atari_disk : 1; /* Is an old Atari disk */
+ unsigned changed : 1; /* Medium has been changed */
+ unsigned long size; /* #blocks */
+ int access_count;
+} acsi_info[MAX_DEV];
+
+/*
+ * SENSE KEYS
+ */
+
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define BLANK_CHECK 0x08
+#define COPY_ABORTED 0x0a
+#define ABORTED_COMMAND 0x0b
+#define VOLUME_OVERFLOW 0x0d
+#define MISCOMPARE 0x0e
+
+
+/*
+ * DEVICE TYPES
+ */
+
+#define TYPE_DISK 0x00
+#define TYPE_TAPE 0x01
+#define TYPE_WORM 0x04
+#define TYPE_ROM 0x05
+#define TYPE_MOD 0x07
+#define TYPE_NO_LUN 0x7f
+
+/* The data returned by MODE SENSE differ between the old Atari
+ * hard disks and SCSI disks connected to ACSI. In the following, both
+ * formats are defined and some macros to operate on them potably.
+ */
+
+typedef struct {
+ unsigned long dummy[2];
+ unsigned long sector_size;
+ unsigned char format_code;
+#define ATARI_SENSE_FORMAT_FIX 1
+#define ATARI_SENSE_FORMAT_CHNG 2
+ unsigned char cylinders_h;
+ unsigned char cylinders_l;
+ unsigned char heads;
+ unsigned char reduced_h;
+ unsigned char reduced_l;
+ unsigned char precomp_h;
+ unsigned char precomp_l;
+ unsigned char landing_zone;
+ unsigned char steprate;
+ unsigned char type;
+#define ATARI_SENSE_TYPE_FIXCHNG_MASK 4
+#define ATARI_SENSE_TYPE_SOFTHARD_MASK 8
+#define ATARI_SENSE_TYPE_FIX 4
+#define ATARI_SENSE_TYPE_CHNG 0
+#define ATARI_SENSE_TYPE_SOFT 0
+#define ATARI_SENSE_TYPE_HARD 8
+ unsigned char sectors;
+} ATARI_SENSE_DATA;
+
+#define ATARI_CAPACITY(sd) \
+ (((int)((sd).cylinders_h<<8)|(sd).cylinders_l) * \
+ (sd).heads * (sd).sectors)
+
+
+typedef struct {
+ unsigned char dummy1;
+ unsigned char medium_type;
+ unsigned char dummy2;
+ unsigned char descriptor_size;
+ unsigned long block_count;
+ unsigned long sector_size;
+ /* Page 0 data */
+ unsigned char page_code;
+ unsigned char page_size;
+ unsigned char page_flags;
+ unsigned char qualifier;
+} SCSI_SENSE_DATA;
+
+#define SCSI_CAPACITY(sd) ((sd).block_count & 0xffffff)
+
+
+typedef union {
+ ATARI_SENSE_DATA atari;
+ SCSI_SENSE_DATA scsi;
+} SENSE_DATA;
+
+#define SENSE_TYPE_UNKNOWN 0
+#define SENSE_TYPE_ATARI 1
+#define SENSE_TYPE_SCSI 2
+
+#define SENSE_TYPE(sd) \
+ (((sd).atari.dummy[0] == 8 && \
+ ((sd).atari.format_code == 1 || \
+ (sd).atari.format_code == 2)) ? SENSE_TYPE_ATARI : \
+ ((sd).scsi.dummy1 >= 11) ? SENSE_TYPE_SCSI : \
+ SENSE_TYPE_UNKNOWN)
+
+#define CAPACITY(sd) \
+ (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \
+ ATARI_CAPACITY((sd).atari) : \
+ SCSI_CAPACITY((sd).scsi))
+
+#define SECTOR_SIZE(sd) \
+ (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \
+ (sd).atari.sector_size : \
+ (sd).scsi.sector_size & 0xffffff)
+
+/* Default size if capacity cannot be determined (1 GByte) */
+#define DEFAULT_SIZE 0x1fffff
+
+#define CARTRCH_STAT(aip,buf) \
+ (aip->old_atari_disk ? \
+ (((buf)[0] & 0x7f) == 0x28) : \
+ ((((buf)[0] & 0x70) == 0x70) ? \
+ (((buf)[2] & 0x0f) == 0x06) : \
+ (((buf)[0] & 0x0f) == 0x06))) \
+
+/* These two are also exported to other drivers that work on the ACSI bus and
+ * need an ST-RAM buffer. */
+char *acsi_buffer;
+unsigned long phys_acsi_buffer;
+
+static int NDevices;
+
+static int CurrentNReq;
+static int CurrentNSect;
+static char *CurrentBuffer;
+
+static DEFINE_SPINLOCK(acsi_lock);
+
+
+#define SET_TIMER() mod_timer(&acsi_timer, jiffies + ACSI_TIMEOUT)
+#define CLEAR_TIMER() del_timer(&acsi_timer)
+
+static unsigned long STramMask;
+#define STRAM_ADDR(a) (((a) & STramMask) == 0)
+
+
+
+/* ACSI commands */
+
+static char tur_cmd[6] = { 0x00, 0, 0, 0, 0, 0 };
+static char modesense_cmd[6] = { 0x1a, 0, 0, 0, 24, 0 };
+static char modeselect_cmd[6] = { 0x15, 0, 0, 0, 12, 0 };
+static char inquiry_cmd[6] = { 0x12, 0, 0, 0,255, 0 };
+static char reqsense_cmd[6] = { 0x03, 0, 0, 0, 4, 0 };
+static char read_cmd[6] = { 0x08, 0, 0, 0, 0, 0 };
+static char write_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 };
+static char pa_med_rem_cmd[6] = { 0x1e, 0, 0, 0, 0, 0 };
+
+#define CMDSET_TARG_LUN(cmd,targ,lun) \
+ do { \
+ cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \
+ cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \
+ } while(0)
+
+#define CMDSET_BLOCK(cmd,blk) \
+ do { \
+ unsigned long __blk = (blk); \
+ cmd[3] = __blk; __blk >>= 8; \
+ cmd[2] = __blk; __blk >>= 8; \
+ cmd[1] = (cmd[1] & 0xe0) | (__blk & 0x1f); \
+ } while(0)
+
+#define CMDSET_LEN(cmd,len) \
+ do { \
+ cmd[4] = (len); \
+ } while(0)
+
+/* ACSI errors (from REQUEST SENSE); There are two tables, one for the
+ * old Atari disks and one for SCSI on ACSI disks.
+ */
+
+struct acsi_error {
+ unsigned char code;
+ const char *text;
+} atari_acsi_errors[] = {
+ { 0x00, "No error (??)" },
+ { 0x01, "No index pulses" },
+ { 0x02, "Seek not complete" },
+ { 0x03, "Write fault" },
+ { 0x04, "Drive not ready" },
+ { 0x06, "No Track 00 signal" },
+ { 0x10, "ECC error in ID field" },
+ { 0x11, "Uncorrectable data error" },
+ { 0x12, "ID field address mark not found" },
+ { 0x13, "Data field address mark not found" },
+ { 0x14, "Record not found" },
+ { 0x15, "Seek error" },
+ { 0x18, "Data check in no retry mode" },
+ { 0x19, "ECC error during verify" },
+ { 0x1a, "Access to bad block" },
+ { 0x1c, "Unformatted or bad format" },
+ { 0x20, "Invalid command" },
+ { 0x21, "Invalid block address" },
+ { 0x23, "Volume overflow" },
+ { 0x24, "Invalid argument" },
+ { 0x25, "Invalid drive number" },
+ { 0x26, "Byte zero parity check" },
+ { 0x28, "Cartride changed" },
+ { 0x2c, "Error count overflow" },
+ { 0x30, "Controller selftest failed" }
+},
+
+ scsi_acsi_errors[] = {
+ { 0x00, "No error (??)" },
+ { 0x01, "Recovered error" },
+ { 0x02, "Drive not ready" },
+ { 0x03, "Uncorrectable medium error" },
+ { 0x04, "Hardware error" },
+ { 0x05, "Illegal request" },
+ { 0x06, "Unit attention (Reset or cartridge changed)" },
+ { 0x07, "Data protection" },
+ { 0x08, "Blank check" },
+ { 0x0b, "Aborted Command" },
+ { 0x0d, "Volume overflow" }
+};
+
+
+
+/***************************** Prototypes *****************************/
+
+static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int
+ rwflag, int enable);
+static int acsi_reqsense( char *buffer, int targ, int lun);
+static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip);
+static irqreturn_t acsi_interrupt (int irq, void *data, struct pt_regs *fp);
+static void unexpected_acsi_interrupt( void );
+static void bad_rw_intr( void );
+static void read_intr( void );
+static void write_intr( void);
+static void acsi_times_out( unsigned long dummy );
+static void copy_to_acsibuffer( void );
+static void copy_from_acsibuffer( void );
+static void do_end_requests( void );
+static void do_acsi_request( request_queue_t * );
+static void redo_acsi_request( void );
+static int acsi_ioctl( struct inode *inode, struct file *file, unsigned int
+ cmd, unsigned long arg );
+static int acsi_open( struct inode * inode, struct file * filp );
+static int acsi_release( struct inode * inode, struct file * file );
+static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag );
+static int acsi_change_blk_size( int target, int lun);
+static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd );
+static int acsi_revalidate (struct gendisk *disk);
+
+/************************* End of Prototypes **************************/
+
+
+struct timer_list acsi_timer = TIMER_INITIALIZER(acsi_times_out, 0, 0);
+
+
+#ifdef CONFIG_ATARI_SLM
+
+extern int attach_slm( int target, int lun );
+extern int slm_init( void );
+
+#endif
+
+
+
+/***********************************************************************
+ *
+ * ACSI primitives
+ *
+ **********************************************************************/
+
+
+/*
+ * The following two functions wait for _IRQ to become Low or High,
+ * resp., with a timeout. The 'timeout' parameter is in jiffies
+ * (10ms).
+ * If the functions are called with timer interrupts on (int level <
+ * 6), the timeout is based on the 'jiffies' variable to provide exact
+ * timeouts for device probing etc.
+ * If interrupts are disabled, the number of tries is based on the
+ * 'loops_per_jiffy' variable. A rough estimation is sufficient here...
+ */
+
+#define INT_LEVEL \
+ ({ unsigned __sr; \
+ __asm__ __volatile__ ( "movew %/sr,%0" : "=dm" (__sr) ); \
+ (__sr >> 8) & 7; \
+ })
+
+int acsi_wait_for_IRQ( unsigned timeout )
+
+{
+ if (INT_LEVEL < 6) {
+ unsigned long maxjif = jiffies + timeout;
+ while (time_before(jiffies, maxjif))
+ if (!(mfp.par_dt_reg & 0x20)) return( 1 );
+ }
+ else {
+ long tries = loops_per_jiffy / 8 * timeout;
+ while( --tries >= 0 )
+ if (!(mfp.par_dt_reg & 0x20)) return( 1 );
+ }
+ return( 0 ); /* timeout! */
+}
+
+
+int acsi_wait_for_noIRQ( unsigned timeout )
+
+{
+ if (INT_LEVEL < 6) {
+ unsigned long maxjif = jiffies + timeout;
+ while (time_before(jiffies, maxjif))
+ if (mfp.par_dt_reg & 0x20) return( 1 );
+ }
+ else {
+ long tries = loops_per_jiffy * timeout / 8;
+ while( tries-- >= 0 )
+ if (mfp.par_dt_reg & 0x20) return( 1 );
+ }
+ return( 0 ); /* timeout! */
+}
+
+static struct timeval start_time;
+
+void
+acsi_delay_start(void)
+{
+ do_gettimeofday(&start_time);
+}
+
+/* wait from acsi_delay_start to now usec (<1E6) usec */
+
+void
+acsi_delay_end(long usec)
+{
+ struct timeval end_time;
+ long deltau,deltas;
+ do_gettimeofday(&end_time);
+ deltau=end_time.tv_usec - start_time.tv_usec;
+ deltas=end_time.tv_sec - start_time.tv_sec;
+ if (deltas > 1 || deltas < 0)
+ return;
+ if (deltas > 0)
+ deltau += 1000*1000;
+ if (deltau >= usec)
+ return;
+ udelay(usec-deltau);
+}
+
+/* acsicmd_dma() sends an ACSI command and sets up the DMA to transfer
+ * 'blocks' blocks of 512 bytes from/to 'buffer'.
+ * Because the _IRQ signal is used for handshaking the command bytes,
+ * the ACSI interrupt has to be disabled in this function. If the end
+ * of the operation should be signalled by a real interrupt, it has to be
+ * reenabled afterwards.
+ */
+
+static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int rwflag, int enable)
+
+{ unsigned long flags, paddr;
+ int i;
+
+#ifdef NO_WRITE
+ if (rwflag || *cmd == 0x0a) {
+ printk( "ACSI: Write commands disabled!\n" );
+ return( 0 );
+ }
+#endif
+
+ rwflag = rwflag ? 0x100 : 0;
+ paddr = virt_to_phys( buffer );
+
+ acsi_delay_end(COMMAND_DELAY);
+ DISABLE_IRQ();
+
+ local_irq_save(flags);
+ /* Low on A1 */
+ dma_wd.dma_mode_status = 0x88 | rwflag;
+ MFPDELAY();
+
+ /* set DMA address */
+ dma_wd.dma_lo = (unsigned char)paddr;
+ paddr >>= 8;
+ MFPDELAY();
+ dma_wd.dma_md = (unsigned char)paddr;
+ paddr >>= 8;
+ MFPDELAY();
+ if (ATARIHW_PRESENT(EXTD_DMA))
+ st_dma_ext_dmahi = (unsigned short)paddr;
+ else
+ dma_wd.dma_hi = (unsigned char)paddr;
+ MFPDELAY();
+ local_irq_restore(flags);
+
+ /* send the command bytes except the last */
+ for( i = 0; i < 5; ++i ) {
+ DMA_LONG_WRITE( *cmd++, 0x8a | rwflag );
+ udelay(20);
+ if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
+ }
+
+ /* Clear FIFO and switch DMA to correct direction */
+ dma_wd.dma_mode_status = 0x92 | (rwflag ^ 0x100);
+ MFPDELAY();
+ dma_wd.dma_mode_status = 0x92 | rwflag;
+ MFPDELAY();
+
+ /* How many sectors for DMA */
+ dma_wd.fdc_acces_seccount = blocks;
+ MFPDELAY();
+
+ /* send last command byte */
+ dma_wd.dma_mode_status = 0x8a | rwflag;
+ MFPDELAY();
+ DMA_LONG_WRITE( *cmd++, 0x0a | rwflag );
+ if (enable)
+ ENABLE_IRQ();
+ udelay(80);
+
+ return( 1 );
+}
+
+
+/*
+ * acsicmd_nodma() sends an ACSI command that requires no DMA.
+ */
+
+int acsicmd_nodma( const char *cmd, int enable)
+
+{ int i;
+
+ acsi_delay_end(COMMAND_DELAY);
+ DISABLE_IRQ();
+
+ /* send first command byte */
+ dma_wd.dma_mode_status = 0x88;
+ MFPDELAY();
+ DMA_LONG_WRITE( *cmd++, 0x8a );
+ udelay(20);
+ if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
+
+ /* send the intermediate command bytes */
+ for( i = 0; i < 4; ++i ) {
+ DMA_LONG_WRITE( *cmd++, 0x8a );
+ udelay(20);
+ if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
+ }
+
+ /* send last command byte */
+ DMA_LONG_WRITE( *cmd++, 0x0a );
+ if (enable)
+ ENABLE_IRQ();
+ udelay(80);
+
+ return( 1 );
+ /* Note that the ACSI interrupt is still disabled after this
+ * function. If you want to get the IRQ delivered, enable it manually!
+ */
+}
+
+
+static int acsi_reqsense( char *buffer, int targ, int lun)
+
+{
+ CMDSET_TARG_LUN( reqsense_cmd, targ, lun);
+ if (!acsicmd_dma( reqsense_cmd, buffer, 1, 0, 0 )) return( 0 );
+ if (!acsi_wait_for_IRQ( 10 )) return( 0 );
+ acsi_getstatus();
+ if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
+ if (!acsi_wait_for_IRQ( 10 )) return( 0 );
+ acsi_getstatus();
+ if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
+ if (!acsi_wait_for_IRQ( 10 )) return( 0 );
+ acsi_getstatus();
+ if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
+ if (!acsi_wait_for_IRQ( 10 )) return( 0 );
+ acsi_getstatus();
+ dma_cache_maintenance( virt_to_phys(buffer), 16, 0 );
+
+ return( 1 );
+}
+
+
+/*
+ * ACSI status phase: get the status byte from the bus
+ *
+ * I've seen several times that a 0xff status is read, propably due to
+ * a timing error. In this case, the procedure is repeated after the
+ * next _IRQ edge.
+ */
+
+int acsi_getstatus( void )
+
+{ int status;
+
+ DISABLE_IRQ();
+ for(;;) {
+ if (!acsi_wait_for_IRQ( 100 )) {
+ acsi_delay_start();
+ return( -1 );
+ }
+ dma_wd.dma_mode_status = 0x8a;
+ MFPDELAY();
+ status = dma_wd.fdc_acces_seccount;
+ if (status != 0xff) break;
+#ifdef DEBUG
+ printk("ACSI: skipping 0xff status byte\n" );
+#endif
+ udelay(40);
+ acsi_wait_for_noIRQ( 20 );
+ }
+ dma_wd.dma_mode_status = 0x80;
+ udelay(40);
+ acsi_wait_for_noIRQ( 20 );
+
+ acsi_delay_start();
+ return( status & 0x1f ); /* mask of the device# */
+}
+
+
+#if (defined(CONFIG_ATARI_SLM) || defined(CONFIG_ATARI_SLM_MODULE))
+
+/* Receive data in an extended status phase. Needed by SLM printer. */
+
+int acsi_extstatus( char *buffer, int cnt )
+
+{ int status;
+
+ DISABLE_IRQ();
+ udelay(80);
+ while( cnt-- > 0 ) {
+ if (!acsi_wait_for_IRQ( 40 )) return( 0 );
+ dma_wd.dma_mode_status = 0x8a;
+ MFPDELAY();
+ status = dma_wd.fdc_acces_seccount;
+ MFPDELAY();
+ *buffer++ = status & 0xff;
+ udelay(40);
+ }
+ return( 1 );
+}
+
+
+/* Finish an extended status phase */
+
+void acsi_end_extstatus( void )
+
+{
+ dma_wd.dma_mode_status = 0x80;
+ udelay(40);
+ acsi_wait_for_noIRQ( 20 );
+ acsi_delay_start();
+}
+
+
+/* Send data in an extended command phase */
+
+int acsi_extcmd( unsigned char *buffer, int cnt )
+
+{
+ while( cnt-- > 0 ) {
+ DMA_LONG_WRITE( *buffer++, 0x8a );
+ udelay(20);
+ if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
+ }
+ return( 1 );
+}
+
+#endif
+
+
+static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip)
+
+{ int atari_err, i, errcode;
+ struct acsi_error *arr;
+
+ atari_err = aip->old_atari_disk;
+ if (atari_err)
+ errcode = errblk[0] & 0x7f;
+ else
+ if ((errblk[0] & 0x70) == 0x70)
+ errcode = errblk[2] & 0x0f;
+ else
+ errcode = errblk[0] & 0x0f;
+
+ printk( KERN_ERR "ACSI error 0x%02x", errcode );
+
+ if (errblk[0] & 0x80)
+ printk( " for sector %d",
+ ((errblk[1] & 0x1f) << 16) |
+ (errblk[2] << 8) | errblk[0] );
+
+ arr = atari_err ? atari_acsi_errors : scsi_acsi_errors;
+ i = atari_err ? sizeof(atari_acsi_errors)/sizeof(*atari_acsi_errors) :
+ sizeof(scsi_acsi_errors)/sizeof(*scsi_acsi_errors);
+
+ for( --i; i >= 0; --i )
+ if (arr[i].code == errcode) break;
+ if (i >= 0)
+ printk( ": %s\n", arr[i].text );
+}
+
+/*******************************************************************
+ *
+ * ACSI interrupt routine
+ * Test, if this is a ACSI interrupt and call the irq handler
+ * Otherwise ignore this interrupt.
+ *
+ *******************************************************************/
+
+static irqreturn_t acsi_interrupt(int irq, void *data, struct pt_regs *fp )
+
+{ void (*acsi_irq_handler)(void) = do_acsi;
+
+ do_acsi = NULL;
+ CLEAR_TIMER();
+
+ if (!acsi_irq_handler)
+ acsi_irq_handler = unexpected_acsi_interrupt;
+ acsi_irq_handler();
+ return IRQ_HANDLED;
+}
+
+
+/******************************************************************
+ *
+ * The Interrupt handlers
+ *
+ *******************************************************************/
+
+
+static void unexpected_acsi_interrupt( void )
+
+{
+ printk( KERN_WARNING "Unexpected ACSI interrupt\n" );
+}
+
+
+/* This function is called in case of errors. Because we cannot reset
+ * the ACSI bus or a single device, there is no other choice than
+ * retrying several times :-(
+ */
+
+static void bad_rw_intr( void )
+
+{
+ if (!CURRENT)
+ return;
+
+ if (++CURRENT->errors >= MAX_ERRORS)
+ end_request(CURRENT, 0);
+ /* Otherwise just retry */
+}
+
+
+static void read_intr( void )
+
+{ int status;
+
+ status = acsi_getstatus();
+ if (status != 0) {
+ struct gendisk *disk = CURRENT->rq_disk;
+ struct acsi_info_struct *aip = disk->private_data;
+ printk(KERN_ERR "%s: ", disk->disk_name);
+ if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun))
+ printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
+ else {
+ acsi_print_error(acsi_buffer, aip);
+ if (CARTRCH_STAT(aip, acsi_buffer))
+ aip->changed = 1;
+ }
+ ENABLE_IRQ();
+ bad_rw_intr();
+ redo_acsi_request();
+ return;
+ }
+
+ dma_cache_maintenance( virt_to_phys(CurrentBuffer), CurrentNSect*512, 0 );
+ if (CurrentBuffer == acsi_buffer)
+ copy_from_acsibuffer();
+
+ do_end_requests();
+ redo_acsi_request();
+}
+
+
+static void write_intr(void)
+
+{ int status;
+
+ status = acsi_getstatus();
+ if (status != 0) {
+ struct gendisk *disk = CURRENT->rq_disk;
+ struct acsi_info_struct *aip = disk->private_data;
+ printk( KERN_ERR "%s: ", disk->disk_name);
+ if (!acsi_reqsense( acsi_buffer, aip->target, aip->lun))
+ printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
+ else {
+ acsi_print_error(acsi_buffer, aip);
+ if (CARTRCH_STAT(aip, acsi_buffer))
+ aip->changed = 1;
+ }
+ bad_rw_intr();
+ redo_acsi_request();
+ return;
+ }
+
+ do_end_requests();
+ redo_acsi_request();
+}
+
+
+static void acsi_times_out( unsigned long dummy )
+
+{
+ DISABLE_IRQ();
+ if (!do_acsi) return;
+
+ do_acsi = NULL;
+ printk( KERN_ERR "ACSI timeout\n" );
+ if (!CURRENT)
+ return;
+ if (++CURRENT->errors >= MAX_ERRORS) {
+#ifdef DEBUG
+ printk( KERN_ERR "ACSI: too many errors.\n" );
+#endif
+ end_request(CURRENT, 0);
+ }
+
+ redo_acsi_request();
+}
+
+
+
+/***********************************************************************
+ *
+ * Scatter-gather utility functions
+ *
+ ***********************************************************************/
+
+
+static void copy_to_acsibuffer( void )
+
+{ int i;
+ char *src, *dst;
+ struct buffer_head *bh;
+
+ src = CURRENT->buffer;
+ dst = acsi_buffer;
+ bh = CURRENT->bh;
+
+ if (!bh)
+ memcpy( dst, src, CurrentNSect*512 );
+ else
+ for( i = 0; i < CurrentNReq; ++i ) {
+ memcpy( dst, src, bh->b_size );
+ dst += bh->b_size;
+ if ((bh = bh->b_reqnext))
+ src = bh->b_data;
+ }
+}
+
+
+static void copy_from_acsibuffer( void )
+
+{ int i;
+ char *src, *dst;
+ struct buffer_head *bh;
+
+ dst = CURRENT->buffer;
+ src = acsi_buffer;
+ bh = CURRENT->bh;
+
+ if (!bh)
+ memcpy( dst, src, CurrentNSect*512 );
+ else
+ for( i = 0; i < CurrentNReq; ++i ) {
+ memcpy( dst, src, bh->b_size );
+ src += bh->b_size;
+ if ((bh = bh->b_reqnext))
+ dst = bh->b_data;
+ }
+}
+
+
+static void do_end_requests( void )
+
+{ int i, n;
+
+ if (!CURRENT->bh) {
+ CURRENT->nr_sectors -= CurrentNSect;
+ CURRENT->current_nr_sectors -= CurrentNSect;
+ CURRENT->sector += CurrentNSect;
+ if (CURRENT->nr_sectors == 0)
+ end_request(CURRENT, 1);
+ }
+ else {
+ for( i = 0; i < CurrentNReq; ++i ) {
+ n = CURRENT->bh->b_size >> 9;
+ CURRENT->nr_sectors -= n;
+ CURRENT->current_nr_sectors -= n;
+ CURRENT->sector += n;
+ end_request(CURRENT, 1);
+ }
+ }
+}
+
+
+
+
+/***********************************************************************
+ *
+ * do_acsi_request and friends
+ *
+ ***********************************************************************/
+
+static void do_acsi_request( request_queue_t * q )
+
+{
+ stdma_lock( acsi_interrupt, NULL );
+ redo_acsi_request();
+}
+
+
+static void redo_acsi_request( void )
+{
+ unsigned block, target, lun, nsect;
+ char *buffer;
+ unsigned long pbuffer;
+ struct buffer_head *bh;
+ struct gendisk *disk;
+ struct acsi_info_struct *aip;
+
+ repeat:
+ CLEAR_TIMER();
+
+ if (do_acsi)
+ return;
+
+ if (!CURRENT) {
+ do_acsi = NULL;
+ ENABLE_IRQ();
+ stdma_release();
+ return;
+ }
+
+ disk = CURRENT->rq_disk;
+ aip = disk->private_data;
+ if (CURRENT->bh) {
+ if (!CURRENT->bh && !buffer_locked(CURRENT->bh))
+ panic("ACSI: block not locked");
+ }
+
+ block = CURRENT->sector;
+ if (block+CURRENT->nr_sectors >= get_capacity(disk)) {
+#ifdef DEBUG
+ printk( "%s: attempted access for blocks %d...%ld past end of device at block %ld.\n",
+ disk->disk_name,
+ block, block + CURRENT->nr_sectors - 1,
+ get_capacity(disk));
+#endif
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+ if (aip->changed) {
+ printk( KERN_NOTICE "%s: request denied because cartridge has "
+ "been changed.\n", disk->disk_name);
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+
+ target = aip->target;
+ lun = aip->lun;
+
+ /* Find out how many sectors should be transferred from/to
+ * consecutive buffers and thus can be done with a single command.
+ */
+ buffer = CURRENT->buffer;
+ pbuffer = virt_to_phys(buffer);
+ nsect = CURRENT->current_nr_sectors;
+ CurrentNReq = 1;
+
+ if ((bh = CURRENT->bh) && bh != CURRENT->bhtail) {
+ if (!STRAM_ADDR(pbuffer)) {
+ /* If transfer is done via the ACSI buffer anyway, we can
+ * assemble as much bh's as fit in the buffer.
+ */
+ while( (bh = bh->b_reqnext) ) {
+ if (nsect + (bh->b_size>>9) > ACSI_BUFFER_SECTORS) break;
+ nsect += bh->b_size >> 9;
+ ++CurrentNReq;
+ if (bh == CURRENT->bhtail) break;
+ }
+ buffer = acsi_buffer;
+ pbuffer = phys_acsi_buffer;
+ }
+ else {
+ unsigned long pendadr, pnewadr;
+ pendadr = pbuffer + nsect*512;
+ while( (bh = bh->b_reqnext) ) {
+ pnewadr = virt_to_phys(bh->b_data);
+ if (!STRAM_ADDR(pnewadr) || pendadr != pnewadr) break;
+ nsect += bh->b_size >> 9;
+ pendadr = pnewadr + bh->b_size;
+ ++CurrentNReq;
+ if (bh == CURRENT->bhtail) break;
+ }
+ }
+ }
+ else {
+ if (!STRAM_ADDR(pbuffer)) {
+ buffer = acsi_buffer;
+ pbuffer = phys_acsi_buffer;
+ if (nsect > ACSI_BUFFER_SECTORS)
+ nsect = ACSI_BUFFER_SECTORS;
+ }
+ }
+ CurrentBuffer = buffer;
+ CurrentNSect = nsect;
+
+ if (rq_data_dir(CURRENT) == WRITE) {
+ CMDSET_TARG_LUN( write_cmd, target, lun );
+ CMDSET_BLOCK( write_cmd, block );
+ CMDSET_LEN( write_cmd, nsect );
+ if (buffer == acsi_buffer)
+ copy_to_acsibuffer();
+ dma_cache_maintenance( pbuffer, nsect*512, 1 );
+ do_acsi = write_intr;
+ if (!acsicmd_dma( write_cmd, buffer, nsect, 1, 1)) {
+ do_acsi = NULL;
+ printk( KERN_ERR "ACSI (write): Timeout in command block\n" );
+ bad_rw_intr();
+ goto repeat;
+ }
+ SET_TIMER();
+ return;
+ }
+ if (rq_data_dir(CURRENT) == READ) {
+ CMDSET_TARG_LUN( read_cmd, target, lun );
+ CMDSET_BLOCK( read_cmd, block );
+ CMDSET_LEN( read_cmd, nsect );
+ do_acsi = read_intr;
+ if (!acsicmd_dma( read_cmd, buffer, nsect, 0, 1)) {
+ do_acsi = NULL;
+ printk( KERN_ERR "ACSI (read): Timeout in command block\n" );
+ bad_rw_intr();
+ goto repeat;
+ }
+ SET_TIMER();
+ return;
+ }
+ panic("unknown ACSI command");
+}
+
+
+
+/***********************************************************************
+ *
+ * Misc functions: ioctl, open, release, check_change, ...
+ *
+ ***********************************************************************/
+
+
+static int acsi_ioctl( struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg )
+{
+ struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct acsi_info_struct *aip = disk->private_data;
+ switch (cmd) {
+ case HDIO_GETGEO:
+ /* HDIO_GETGEO is supported more for getting the partition's
+ * start sector... */
+ { struct hd_geometry *geo = (struct hd_geometry *)arg;
+ /* just fake some geometry here, it's nonsense anyway; to make it
+ * easy, use Adaptec's usual 64/32 mapping */
+ put_user( 64, &geo->heads );
+ put_user( 32, &geo->sectors );
+ put_user( aip->size >> 11, &geo->cylinders );
+ put_user(get_start_sect(inode->i_bdev), &geo->start);
+ return 0;
+ }
+ case SCSI_IOCTL_GET_IDLUN:
+ /* SCSI compatible GET_IDLUN call to get target's ID and LUN number */
+ put_user( aip->target | (aip->lun << 8),
+ &((Scsi_Idlun *) arg)->dev_id );
+ put_user( 0, &((Scsi_Idlun *) arg)->host_unique_id );
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+
+/*
+ * Open a device, check for read-only and lock the medium if it is
+ * removable.
+ *
+ * Changes by Martin Rogge, 9th Aug 1995:
+ * Check whether check_disk_change (and therefore revalidate_acsidisk)
+ * was successful. They fail when there is no medium in the drive.
+ *
+ * The problem of media being changed during an operation can be
+ * ignored because of the prevent_removal code.
+ *
+ * Added check for the validity of the device number.
+ *
+ */
+
+static int acsi_open( struct inode * inode, struct file * filp )
+{
+ struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct acsi_info_struct *aip = disk->private_data;
+
+ if (aip->access_count == 0 && aip->removable) {
+#if 0
+ aip->changed = 1; /* safety first */
+#endif
+ check_disk_change( inode->i_bdev );
+ if (aip->changed) /* revalidate was not successful (no medium) */
+ return -ENXIO;
+ acsi_prevent_removal(aip, 1);
+ }
+ aip->access_count++;
+
+ if (filp && filp->f_mode) {
+ check_disk_change( inode->i_bdev );
+ if (filp->f_mode & 2) {
+ if (aip->read_only) {
+ acsi_release( inode, filp );
+ return -EROFS;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Releasing a block device means we sync() it, so that it can safely
+ * be forgotten about...
+ */
+
+static int acsi_release( struct inode * inode, struct file * file )
+{
+ struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct acsi_info_struct *aip = disk->private_data;
+ if (--aip->access_count == 0 && aip->removable)
+ acsi_prevent_removal(aip, 0);
+ return( 0 );
+}
+
+/*
+ * Prevent or allow a media change for removable devices.
+ */
+
+static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag)
+{
+ stdma_lock( NULL, NULL );
+
+ CMDSET_TARG_LUN(pa_med_rem_cmd, aip->target, aip->lun);
+ CMDSET_LEN( pa_med_rem_cmd, flag );
+
+ if (acsicmd_nodma(pa_med_rem_cmd, 0) && acsi_wait_for_IRQ(3*HZ))
+ acsi_getstatus();
+ /* Do not report errors -- some devices may not know this command. */
+
+ ENABLE_IRQ();
+ stdma_release();
+}
+
+static int acsi_media_change(struct gendisk *disk)
+{
+ struct acsi_info_struct *aip = disk->private_data;
+
+ if (!aip->removable)
+ return 0;
+
+ if (aip->changed)
+ /* We can be sure that the medium has been changed -- REQUEST
+ * SENSE has reported this earlier.
+ */
+ return 1;
+
+ /* If the flag isn't set, make a test by reading block 0.
+ * If errors happen, it seems to be better to say "changed"...
+ */
+ stdma_lock( NULL, NULL );
+ CMDSET_TARG_LUN(read_cmd, aip->target, aip->lun);
+ CMDSET_BLOCK( read_cmd, 0 );
+ CMDSET_LEN( read_cmd, 1 );
+ if (acsicmd_dma(read_cmd, acsi_buffer, 1, 0, 0) &&
+ acsi_wait_for_IRQ(3*HZ)) {
+ if (acsi_getstatus()) {
+ if (acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
+ if (CARTRCH_STAT(aip, acsi_buffer))
+ aip->changed = 1;
+ }
+ else {
+ printk( KERN_ERR "%s: REQUEST SENSE failed in test for "
+ "medium change; assuming a change\n", disk->disk_name );
+ aip->changed = 1;
+ }
+ }
+ }
+ else {
+ printk( KERN_ERR "%s: Test for medium changed timed out; "
+ "assuming a change\n", disk->disk_name);
+ aip->changed = 1;
+ }
+ ENABLE_IRQ();
+ stdma_release();
+
+ /* Now, after reading a block, the changed status is surely valid. */
+ return aip->changed;
+}
+
+
+static int acsi_change_blk_size( int target, int lun)
+
+{ int i;
+
+ for (i=0; i<12; i++)
+ acsi_buffer[i] = 0;
+
+ acsi_buffer[3] = 8;
+ acsi_buffer[10] = 2;
+ CMDSET_TARG_LUN( modeselect_cmd, target, lun);
+
+ if (!acsicmd_dma( modeselect_cmd, acsi_buffer, 1,1,0) ||
+ !acsi_wait_for_IRQ( 3*HZ ) ||
+ acsi_getstatus() != 0 ) {
+ return(0);
+ }
+ return(1);
+}
+
+
+static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd )
+
+{
+ int page;
+
+ CMDSET_TARG_LUN( modesense_cmd, target, lun );
+ for (page=0; page<4; page++) {
+ modesense_cmd[2] = page;
+ if (!acsicmd_dma( modesense_cmd, acsi_buffer, 1, 0, 0 ) ||
+ !acsi_wait_for_IRQ( 3*HZ ) ||
+ acsi_getstatus())
+ continue;
+
+ /* read twice to jump over the second 16-byte border! */
+ udelay(300);
+ if (acsi_wait_for_noIRQ( 20 ) &&
+ acsicmd_nodma( modesense_cmd, 0 ) &&
+ acsi_wait_for_IRQ( 3*HZ ) &&
+ acsi_getstatus() == 0)
+ break;
+ }
+ if (page == 4) {
+ return(0);
+ }
+
+ dma_cache_maintenance( phys_acsi_buffer, sizeof(SENSE_DATA), 0 );
+ *sd = *(SENSE_DATA *)acsi_buffer;
+
+ /* Validity check, depending on type of data */
+
+ switch( SENSE_TYPE(*sd) ) {
+
+ case SENSE_TYPE_ATARI:
+ if (CAPACITY(*sd) == 0)
+ goto invalid_sense;
+ break;
+
+ case SENSE_TYPE_SCSI:
+ if (sd->scsi.descriptor_size != 8)
+ goto invalid_sense;
+ break;
+
+ case SENSE_TYPE_UNKNOWN:
+
+ printk( KERN_ERR "ACSI target %d, lun %d: Cannot interpret "
+ "sense data\n", target, lun );
+
+ invalid_sense:
+
+#ifdef DEBUG
+ { int i;
+ printk( "Mode sense data for ACSI target %d, lun %d seem not valid:",
+ target, lun );
+ for( i = 0; i < sizeof(SENSE_DATA); ++i )
+ printk( "%02x ", (unsigned char)acsi_buffer[i] );
+ printk( "\n" );
+ }
+#endif
+ return( 0 );
+ }
+
+ return( 1 );
+}
+
+
+
+/*******************************************************************
+ *
+ * Initialization
+ *
+ ********************************************************************/
+
+
+extern struct block_device_operations acsi_fops;
+
+static struct gendisk *acsi_gendisk[MAX_DEV];
+
+#define MAX_SCSI_DEVICE_CODE 10
+
+static const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] =
+{
+ "Direct-Access ",
+ "Sequential-Access",
+ "Printer ",
+ "Processor ",
+ "WORM ",
+ "CD-ROM ",
+ "Scanner ",
+ "Optical Device ",
+ "Medium Changer ",
+ "Communications "
+};
+
+static void print_inquiry(unsigned char *data)
+{
+ int i;
+
+ printk(KERN_INFO " Vendor: ");
+ for (i = 8; i < 16; i++)
+ {
+ if (data[i] >= 0x20 && i < data[4] + 5)
+ printk("%c", data[i]);
+ else
+ printk(" ");
+ }
+
+ printk(" Model: ");
+ for (i = 16; i < 32; i++)
+ {
+ if (data[i] >= 0x20 && i < data[4] + 5)
+ printk("%c", data[i]);
+ else
+ printk(" ");
+ }
+
+ printk(" Rev: ");
+ for (i = 32; i < 36; i++)
+ {
+ if (data[i] >= 0x20 && i < data[4] + 5)
+ printk("%c", data[i]);
+ else
+ printk(" ");
+ }
+
+ printk("\n");
+
+ i = data[0] & 0x1f;
+
+ printk(KERN_INFO " Type: %s ", (i < MAX_SCSI_DEVICE_CODE
+ ? scsi_device_types[i]
+ : "Unknown "));
+ printk(" ANSI SCSI revision: %02x", data[2] & 0x07);
+ if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1)
+ printk(" CCS\n");
+ else
+ printk("\n");
+}
+
+
+/*
+ * Changes by Martin Rogge, 9th Aug 1995:
+ * acsi_devinit has been taken out of acsi_geninit, because it needs
+ * to be called from revalidate_acsidisk. The result of request sense
+ * is now checked for DRIVE NOT READY.
+ *
+ * The structure *aip is only valid when acsi_devinit returns
+ * DEV_SUPPORTED.
+ *
+ */
+
+#define DEV_NONE 0
+#define DEV_UNKNOWN 1
+#define DEV_SUPPORTED 2
+#define DEV_SLM 3
+
+static int acsi_devinit(struct acsi_info_struct *aip)
+{
+ int status, got_inquiry;
+ SENSE_DATA sense;
+ unsigned char reqsense, extsense;
+
+ /*****************************************************************/
+ /* Do a TEST UNIT READY command to test the presence of a device */
+ /*****************************************************************/
+
+ CMDSET_TARG_LUN(tur_cmd, aip->target, aip->lun);
+ if (!acsicmd_nodma(tur_cmd, 0)) {
+ /* timed out -> no device here */
+#ifdef DEBUG_DETECT
+ printk("target %d lun %d: timeout\n", aip->target, aip->lun);
+#endif
+ return DEV_NONE;
+ }
+
+ /*************************/
+ /* Read the ACSI status. */
+ /*************************/
+
+ status = acsi_getstatus();
+ if (status) {
+ if (status == 0x12) {
+ /* The SLM printer should be the only device that
+ * responds with the error code in the status byte. In
+ * correct status bytes, bit 4 is never set.
+ */
+ printk( KERN_INFO "Detected SLM printer at id %d lun %d\n",
+ aip->target, aip->lun);
+ return DEV_SLM;
+ }
+ /* ignore CHECK CONDITION, since some devices send a
+ UNIT ATTENTION */
+ if ((status & 0x1e) != 0x2) {
+#ifdef DEBUG_DETECT
+ printk("target %d lun %d: status %d\n",
+ aip->target, aip->lun, status);
+#endif
+ return DEV_UNKNOWN;
+ }
+ }
+
+ /*******************************/
+ /* Do a REQUEST SENSE command. */
+ /*******************************/
+
+ if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
+ printk( KERN_WARNING "acsi_reqsense failed\n");
+ acsi_buffer[0] = 0;
+ acsi_buffer[2] = UNIT_ATTENTION;
+ }
+ reqsense = acsi_buffer[0];
+ extsense = acsi_buffer[2] & 0xf;
+ if (status) {
+ if ((reqsense & 0x70) == 0x70) { /* extended sense */
+ if (extsense != UNIT_ATTENTION &&
+ extsense != NOT_READY) {
+#ifdef DEBUG_DETECT
+ printk("target %d lun %d: extended sense %d\n",
+ aip->target, aip->lun, extsense);
+#endif
+ return DEV_UNKNOWN;
+ }
+ }
+ else {
+ if (reqsense & 0x7f) {
+#ifdef DEBUG_DETECT
+ printk("target %d lun %d: sense %d\n",
+ aip->target, aip->lun, reqsense);
+#endif
+ return DEV_UNKNOWN;
+ }
+ }
+ }
+ else
+ if (reqsense == 0x4) { /* SH204 Bug workaround */
+#ifdef DEBUG_DETECT
+ printk("target %d lun %d status=0 sense=4\n",
+ aip->target, aip->lun);
+#endif
+ return DEV_UNKNOWN;
+ }
+
+ /***********************************************************/
+ /* Do an INQUIRY command to get more infos on this device. */
+ /***********************************************************/
+
+ /* Assume default values */
+ aip->removable = 1;
+ aip->read_only = 0;
+ aip->old_atari_disk = 0;
+ aip->changed = (extsense == NOT_READY); /* medium inserted? */
+ aip->size = DEFAULT_SIZE;
+ got_inquiry = 0;
+ /* Fake inquiry result for old atari disks */
+ memcpy(acsi_buffer, "\000\000\001\000 Adaptec 40xx"
+ " ", 40);
+ CMDSET_TARG_LUN(inquiry_cmd, aip->target, aip->lun);
+ if (acsicmd_dma(inquiry_cmd, acsi_buffer, 1, 0, 0) &&
+ acsi_getstatus() == 0) {
+ acsicmd_nodma(inquiry_cmd, 0);
+ acsi_getstatus();
+ dma_cache_maintenance( phys_acsi_buffer, 256, 0 );
+ got_inquiry = 1;
+ aip->removable = !!(acsi_buffer[1] & 0x80);
+ }
+ if (aip->type == NONE) /* only at boot time */
+ print_inquiry(acsi_buffer);
+ switch(acsi_buffer[0]) {
+ case TYPE_DISK:
+ aip->type = HARDDISK;
+ break;
+ case TYPE_ROM:
+ aip->type = CDROM;
+ aip->read_only = 1;
+ break;
+ default:
+ return DEV_UNKNOWN;
+ }
+ /****************************/
+ /* Do a MODE SENSE command. */
+ /****************************/
+
+ if (!acsi_mode_sense(aip->target, aip->lun, &sense)) {
+ printk( KERN_WARNING "No mode sense data.\n" );
+ return DEV_UNKNOWN;
+ }
+ if ((SECTOR_SIZE(sense) != 512) &&
+ ((aip->type != CDROM) ||
+ !acsi_change_blk_size(aip->target, aip->lun) ||
+ !acsi_mode_sense(aip->target, aip->lun, &sense) ||
+ (SECTOR_SIZE(sense) != 512))) {
+ printk( KERN_WARNING "Sector size != 512 not supported.\n" );
+ return DEV_UNKNOWN;
+ }
+ /* There are disks out there that claim to have 0 sectors... */
+ if (CAPACITY(sense))
+ aip->size = CAPACITY(sense); /* else keep DEFAULT_SIZE */
+ if (!got_inquiry && SENSE_TYPE(sense) == SENSE_TYPE_ATARI) {
+ /* If INQUIRY failed and the sense data suggest an old
+ * Atari disk (SH20x, Megafile), the disk is not removable
+ */
+ aip->removable = 0;
+ aip->old_atari_disk = 1;
+ }
+
+ /******************/
+ /* We've done it. */
+ /******************/
+
+ return DEV_SUPPORTED;
+}
+
+EXPORT_SYMBOL(acsi_delay_start);
+EXPORT_SYMBOL(acsi_delay_end);
+EXPORT_SYMBOL(acsi_wait_for_IRQ);
+EXPORT_SYMBOL(acsi_wait_for_noIRQ);
+EXPORT_SYMBOL(acsicmd_nodma);
+EXPORT_SYMBOL(acsi_getstatus);
+EXPORT_SYMBOL(acsi_buffer);
+EXPORT_SYMBOL(phys_acsi_buffer);
+
+#ifdef CONFIG_ATARI_SLM_MODULE
+void acsi_attach_SLMs( int (*attach_func)( int, int ) );
+
+EXPORT_SYMBOL(acsi_extstatus);
+EXPORT_SYMBOL(acsi_end_extstatus);
+EXPORT_SYMBOL(acsi_extcmd);
+EXPORT_SYMBOL(acsi_attach_SLMs);
+
+/* to remember IDs of SLM devices, SLM module is loaded later
+ * (index is target#, contents is lun#, -1 means "no SLM") */
+int SLM_devices[8];
+#endif
+
+static struct block_device_operations acsi_fops = {
+ .owner = THIS_MODULE,
+ .open = acsi_open,
+ .release = acsi_release,
+ .ioctl = acsi_ioctl,
+ .media_changed = acsi_media_change,
+ .revalidate_disk= acsi_revalidate,
+};
+
+#ifdef CONFIG_ATARI_SLM_MODULE
+/* call attach_slm() for each device that is a printer; needed for init of SLM
+ * driver as a module, since it's not yet present if acsi.c is inited and thus
+ * the bus gets scanned. */
+void acsi_attach_SLMs( int (*attach_func)( int, int ) )
+{
+ int i, n = 0;
+
+ for( i = 0; i < 8; ++i )
+ if (SLM_devices[i] >= 0)
+ n += (*attach_func)( i, SLM_devices[i] );
+ printk( KERN_INFO "Found %d SLM printer(s) total.\n", n );
+}
+#endif /* CONFIG_ATARI_SLM_MODULE */
+
+
+int acsi_init( void )
+{
+ int err = 0;
+ int i, target, lun;
+ struct acsi_info_struct *aip;
+#ifdef CONFIG_ATARI_SLM
+ int n_slm = 0;
+#endif
+ if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ACSI))
+ return 0;
+ if (register_blkdev(ACSI_MAJOR, "ad")) {
+ err = -EBUSY;
+ goto out1;
+ }
+ if (!(acsi_buffer =
+ (char *)atari_stram_alloc(ACSI_BUFFER_SIZE, "acsi"))) {
+ err = -ENOMEM;
+ printk( KERN_ERR "Unable to get ACSI ST-Ram buffer.\n" );
+ goto out2;
+ }
+ phys_acsi_buffer = virt_to_phys( acsi_buffer );
+ STramMask = ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000;
+
+ acsi_queue = blk_init_queue(do_acsi_request, &acsi_lock);
+ if (!acsi_queue) {
+ err = -ENOMEM;
+ goto out2a;
+ }
+#ifdef CONFIG_ATARI_SLM
+ err = slm_init();
+#endif
+ if (err)
+ goto out3;
+
+ printk( KERN_INFO "Probing ACSI devices:\n" );
+ NDevices = 0;
+#ifdef CONFIG_ATARI_SLM_MODULE
+ for( i = 0; i < 8; ++i )
+ SLM_devices[i] = -1;
+#endif
+ stdma_lock(NULL, NULL);
+
+ for (target = 0; target < 8 && NDevices < MAX_DEV; ++target) {
+ lun = 0;
+ do {
+ aip = &acsi_info[NDevices];
+ aip->type = NONE;
+ aip->target = target;
+ aip->lun = lun;
+ i = acsi_devinit(aip);
+ switch (i) {
+ case DEV_SUPPORTED:
+ printk( KERN_INFO "Detected ");
+ switch (aip->type) {
+ case HARDDISK:
+ printk("disk");
+ break;
+ case CDROM:
+ printk("cdrom");
+ break;
+ default:
+ }
+ printk(" ad%c at id %d lun %d ",
+ 'a' + NDevices, target, lun);
+ if (aip->removable)
+ printk("(removable) ");
+ if (aip->read_only)
+ printk("(read-only) ");
+ if (aip->size == DEFAULT_SIZE)
+ printk(" unkown size, using default ");
+ printk("%ld MByte\n",
+ (aip->size*512+1024*1024/2)/(1024*1024));
+ NDevices++;
+ break;
+ case DEV_SLM:
+#ifdef CONFIG_ATARI_SLM
+ n_slm += attach_slm( target, lun );
+ break;
+#endif
+#ifdef CONFIG_ATARI_SLM_MODULE
+ SLM_devices[target] = lun;
+ break;
+#endif
+ /* neither of the above: fall through to unknown device */
+ case DEV_UNKNOWN:
+ printk( KERN_INFO "Detected unsupported device at "
+ "id %d lun %d\n", target, lun);
+ break;
+ }
+ }
+#ifdef CONFIG_ACSI_MULTI_LUN
+ while (i != DEV_NONE && ++lun < MAX_LUN);
+#else
+ while (0);
+#endif
+ }
+
+ /* reenable interrupt */
+ ENABLE_IRQ();
+ stdma_release();
+
+#ifndef CONFIG_ATARI_SLM
+ printk( KERN_INFO "Found %d ACSI device(s) total.\n", NDevices );
+#else
+ printk( KERN_INFO "Found %d ACSI device(s) and %d SLM printer(s) total.\n",
+ NDevices, n_slm );
+#endif
+ err = -ENOMEM;
+ for( i = 0; i < NDevices; ++i ) {
+ acsi_gendisk[i] = alloc_disk(16);
+ if (!acsi_gendisk[i])
+ goto out4;
+ }
+
+ for( i = 0; i < NDevices; ++i ) {
+ struct gendisk *disk = acsi_gendisk[i];
+ sprintf(disk->disk_name, "ad%c", 'a'+i);
+ aip = &acsi_info[NDevices];
+ sprintf(disk->devfs_name, "ad/target%d/lun%d", aip->target, aip->lun);
+ disk->major = ACSI_MAJOR;
+ disk->first_minor = i << 4;
+ if (acsi_info[i].type != HARDDISK) {
+ disk->minors = 1;
+ strcat(disk->devfs_name, "/disc");
+ }
+ disk->fops = &acsi_fops;
+ disk->private_data = &acsi_info[i];
+ set_capacity(disk, acsi_info[i].size);
+ disk->queue = acsi_queue;
+ add_disk(disk);
+ }
+ return 0;
+out4:
+ while (i--)
+ put_disk(acsi_gendisk[i]);
+out3:
+ blk_cleanup_queue(acsi_queue);
+out2a:
+ atari_stram_free( acsi_buffer );
+out2:
+ unregister_blkdev( ACSI_MAJOR, "ad" );
+out1:
+ return err;
+}
+
+
+#ifdef MODULE
+
+MODULE_LICENSE("GPL");
+
+int init_module(void)
+{
+ int err;
+
+ if ((err = acsi_init()))
+ return( err );
+ printk( KERN_INFO "ACSI driver loaded as module.\n");
+ return( 0 );
+}
+
+void cleanup_module(void)
+{
+ int i;
+ del_timer( &acsi_timer );
+ blk_cleanup_queue(acsi_queue);
+ atari_stram_free( acsi_buffer );
+
+ if (unregister_blkdev( ACSI_MAJOR, "ad" ) != 0)
+ printk( KERN_ERR "acsi: cleanup_module failed\n");
+
+ for (i = 0; i < NDevices; i++) {
+ del_gendisk(acsi_gendisk[i]);
+ put_disk(acsi_gendisk[i]);
+ }
+}
+#endif
+
+/*
+ * This routine is called to flush all partitions and partition tables
+ * for a changed scsi disk, and then re-read the new partition table.
+ * If we are revalidating a disk because of a media change, then we
+ * enter with usage == 0. If we are using an ioctl, we automatically have
+ * usage == 1 (we need an open channel to use an ioctl :-), so this
+ * is our limit.
+ *
+ * Changes by Martin Rogge, 9th Aug 1995:
+ * got cd-roms to work by calling acsi_devinit. There are only two problems:
+ * First, if there is no medium inserted, the status will remain "changed".
+ * That is no problem at all, but our design of three-valued logic (medium
+ * changed, medium not changed, no medium inserted).
+ * Secondly the check could fail completely and the drive could deliver
+ * nonsensical data, which could mess up the acsi_info[] structure. In
+ * that case we try to make the entry safe.
+ *
+ */
+
+static int acsi_revalidate(struct gendisk *disk)
+{
+ struct acsi_info_struct *aip = disk->private_data;
+ stdma_lock( NULL, NULL );
+ if (acsi_devinit(aip) != DEV_SUPPORTED) {
+ printk( KERN_ERR "ACSI: revalidate failed for target %d lun %d\n",
+ aip->target, aip->lun);
+ aip->size = 0;
+ aip->read_only = 1;
+ aip->removable = 1;
+ aip->changed = 1; /* next acsi_open will try again... */
+ }
+
+ ENABLE_IRQ();
+ stdma_release();
+ set_capacity(disk, aip->size);
+ return 0;
+}
OpenPOWER on IntegriCloud