libata-sff: separate out BMDMA EH

Some of error handling logic in ata_sff_error_handler() and all of
ata_sff_post_internal_cmd() are for BMDMA.  Create
ata_bmdma_error_handler() and ata_bmdma_post_internal_cmd() and move
BMDMA part into those.

While at it, change DMA protocol check to ata_is_dma(), fix
post_internal_cmd to call ap->ops->bmdma_stop instead of directly
calling ata_bmdma_stop() and open code hardreset selection so that
ata_std_error_handler() doesn't have to know about sff hardreset.

As these two functions are BMDMA specific, there's no reason to check
for bmdma_addr before calling bmdma methods if the protocol of the
failed command is DMA.  sata_mv and pata_mpc52xx now don't need to set
.post_internal_cmd to ATA_OP_NULL and pata_icside and sata_qstor don't
need to set it to their bmdma_stop routines.

ata_sff_post_internal_cmd() becomes noop and is removed.

This fixes p3 described in clean-up-BMDMA-initialization patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index e80628a77669..09a6179f5de3 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -839,7 +839,7 @@ static void pdc_error_handler(struct ata_port *ap)
 	if (!(ap->pflags & ATA_PFLAG_FROZEN))
 		pdc_reset_port(ap);
 
-	ata_std_error_handler(ap);
+	ata_sff_error_handler(ap);
 }
 
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)