Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits)
  [PATCH] pata_ali: small fixes
  [PATCH] pata_via: VIA 8251 bridged systems are now out and about
  [PATCH] trivial piix: swap bogus dot for comma space
  [PATCH] sata_promise: PHYMODE4 fixup
  [PATCH] libata: always use polling IDENTIFY
  [libata] pata_cs5535: fix build
  [PATCH] ahci: do not powerdown during initialization
  [PATCH] libata: prepare ata_sg_clean() for invocation from EH
  [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf()
  [PATCH] libata: implement ata_exec_internal_sg()
  [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  [PATCH] libata: move BMDMA host status recording from EH to interrupt handler
  [PATCH] libata: make sure sdev doesn't go away while rescanning
  [PATCH] libata: don't request sense if the port is frozen
  [PATCH] libata: fix READ CAPACITY simulation
  [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2
  [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs
  [PATCH] libata: remove unused HSM_ST_UNKNOWN
  [PATCH] libata: kill unnecessary sht->max_sectors initializations
  [PATCH] libata: add missing sht->slave_destroy
  ...

1 files changed, 55 insertions, 28 deletions

diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 11942fd03b55..32cf0bfa8921 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.4.1"
 
 /**
  *	sil680_selreg		-	return register base
@@ -218,7 +218,6 @@ static struct scsi_host_template sil680_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -263,32 +262,20 @@ static struct ata_port_operations sil680_port_ops = {
 	.host_stop	= ata_host_stop
 };
 
-static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+/**
+ *	sil680_init_chip		-	chip setup
+ *	@pdev: PCI device
+ *
+ *	Perform all the chip setup which must be done both when the device
+ *	is powered up on boot and when we resume in case we resumed from RAM.
+ *	Returns the final clock settings.
+ */
+ 
+static u8 sil680_init_chip(struct pci_dev *pdev)
 {
-	static struct ata_port_info info = {
-		.sht = &sil680_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
-		.port_ops = &sil680_port_ops
-	};
-	static struct ata_port_info info_slow = {
-		.sht = &sil680_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
-		.port_ops = &sil680_port_ops
-	};
-	static struct ata_port_info *port_info[2] = {&info, &info};
-	static int printed_version;
 	u32 class_rev	= 0;
 	u8 tmpbyte	= 0;
 
-	if (!printed_version++)
-		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
         pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xff;
         /* FIXME: double check */
@@ -323,8 +310,6 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_read_config_byte(pdev,   0x8A, &tmpbyte);
 	printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
 			tmpbyte & 1, tmpbyte & 0x30);
-	if ((tmpbyte & 0x30) == 0)
-		port_info[0] = port_info[1] = &info_slow;
 
 	pci_write_config_byte(pdev,  0xA1, 0x72);
 	pci_write_config_word(pdev,  0xA2, 0x328A);
@@ -343,11 +328,51 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
 		/* This last case is _NOT_ ok */
 		case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
-			return -EIO;
+	}
+	return tmpbyte & 0x30;
+}
+
+static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &sil680_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x7f,
+		.port_ops = &sil680_port_ops
+	};
+	static struct ata_port_info info_slow = {
+		.sht = &sil680_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x3f,
+		.port_ops = &sil680_port_ops
+	};
+	static struct ata_port_info *port_info[2] = {&info, &info};
+	static int printed_version;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	switch(sil680_init_chip(pdev))
+	{
+		case 0:
+			port_info[0] = port_info[1] = &info_slow;
+			break;
+		case 0x30:
+			return -ENODEV;
 	}
 	return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int sil680_reinit_one(struct pci_dev *pdev)
+{
+	sil680_init_chip(pdev);
+	return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id sil680[] = {
 	{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
 
@@ -358,7 +383,9 @@ static struct pci_driver sil680_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= sil680,
 	.probe 		= sil680_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= sil680_reinit_one,
 };
 
 static int __init sil680_init(void)