libata: eliminate the home grown dma padding in favour of

that provided by the block layer

ATA requires that all DMA transfers begin and end on word boundaries.
Because of this, a large amount of machinery grew up in ide to adjust
scatterlists on this basis.  However, as of 2.5, the block layer has a
dma_alignment variable which ensures both the beginning and length of a
DMA transfer are aligned on the dma_alignment boundary.  Although the
block layer does adjust the beginning of the transfer to ensure this
happens, it doesn't actually adjust the length, it merely makes sure
that space is allocated for transfers beyond the declared length.  The
upshot of this is that scatterlists may be padded to any size between
the actual length and the length adjusted to the dma_alignment safely
knowing that memory is allocated in this region.

Right at the moment, SCSI takes the default dma_aligment which is on a
512 byte boundary.  Note that this aligment only applies to transfers
coming in from user space.  However, since all kernel allocations are
automatically aligned on a minimum of 32 byte boundaries, it is safe to
adjust them in this manner as well.

tj: * Adjusting sg after padding is done in block layer.  Make libata
      set queue alignment correctly for ATAPI devices and drop broken
      sg mangling from ata_sg_setup().
    * Use request->raw_data_len for ATAPI transfer chunk size.
    * Killed qc->raw_nbytes.
    * Separated out killing qc->n_iter.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 0 insertions, 8 deletions

diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 5b8586dac63b..f97068be2d79 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -304,12 +304,6 @@ static int icside_dma_init(struct pata_icside_info *info)
 }
 
 
-static int pata_icside_port_start(struct ata_port *ap)
-{
-	/* No PRD to alloc */
-	return ata_pad_alloc(ap, ap->dev);
-}
-
 static struct scsi_host_template pata_icside_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -389,8 +383,6 @@ static struct ata_port_operations pata_icside_port_ops = {
 	.irq_clear		= ata_dummy_noret,
 	.irq_on			= ata_irq_on,
 
-	.port_start		= pata_icside_port_start,
-
 	.bmdma_stop		= pata_icside_bmdma_stop,
 	.bmdma_status		= pata_icside_bmdma_status,
 };