Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm.git

14 files changed, 168 insertions, 168 deletions

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 51dbf5489b6b..d74990717559 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/smp.h>
+#include <linux/cpumask.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1b7fcd50c3e2..8880482dcbff 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -433,10 +433,12 @@ void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
 
-	write_seqlock(&xtime_lock);
-	if (dyn_tick->state & DYN_TICK_ENABLED)
-		dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-	write_sequnlock(&xtime_lock);
+	if (dyn_tick) {
+		write_seqlock(&xtime_lock);
+		if (dyn_tick->state & DYN_TICK_ENABLED)
+			dyn_tick->reprogram(next_timer_interrupt() - jiffies);
+		write_sequnlock(&xtime_lock);
+	}
 }
 
 static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 04490a9f8f6e..0422e906cc9a 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -38,90 +38,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-enum ixp4xx_irq_type {
-	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
-};
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
-
-/*************************************************************************
- * GPIO acces functions
- *************************************************************************/
-
-/*
- * Configure GPIO line for input, interrupt, or output operation
- *
- * TODO: Enable/disable the irq_desc based on interrupt or output mode.
- * TODO: Should these be named ixp4xx_gpio_?
- */
-void gpio_line_config(u8 line, u32 style)
-{
-	static const int gpio2irq[] = {
-		6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29
-	};
-	u32 enable;
-	volatile u32 *int_reg;
-	u32 int_style;
-	enum ixp4xx_irq_type irq_type;
-
-	enable = *IXP4XX_GPIO_GPOER;
-
-	if (style & IXP4XX_GPIO_OUT) {
-		enable &= ~((1) << line);
-	} else if (style & IXP4XX_GPIO_IN) {
-		enable |= ((1) << line);
-
-		switch (style & IXP4XX_GPIO_INTSTYLE_MASK)
-		{
-		case (IXP4XX_GPIO_ACTIVE_HIGH):
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		case (IXP4XX_GPIO_ACTIVE_LOW):
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		case (IXP4XX_GPIO_RISING_EDGE):
-			int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		case (IXP4XX_GPIO_FALLING_EDGE):
-			int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		case (IXP4XX_GPIO_TRANSITIONAL):
-			int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		default:
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		}
-
-		if (style & IXP4XX_GPIO_INTSTYLE_MASK)
-			ixp4xx_config_irq(gpio2irq[line], irq_type);
-
-		if (line >= 8) {	/* pins 8-15 */ 
-			line -= 8;
-			int_reg = IXP4XX_GPIO_GPIT2R;
-		}
-		else {			/* pins 0-7 */
-			int_reg = IXP4XX_GPIO_GPIT1R;
-		}
-
-		/* Clear the style for the appropriate pin */
-		*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << 
-		    		(line * IXP4XX_GPIO_STYLE_SIZE));
-
-		/* Set the new style */
-		*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-	}
-
-	*IXP4XX_GPIO_GPOER = enable;
-}
-
-EXPORT_SYMBOL(gpio_line_config);
-
 /*************************************************************************
  * IXP4xx chipset I/O mapping
  *************************************************************************/
@@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void)
  *       (be it PCI or something else) configures that GPIO line
  *       as an IRQ.
  **************************************************************************/
+enum ixp4xx_irq_type {
+	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
+};
+
+static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+
+/*
+ * IRQ -> GPIO mapping table
+ */
+static int irq2gpio[32] = {
+	-1, -1, -1, -1, -1, -1,  0,  1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1,  2,  3,  4,  5,  6,
+	 7,  8,  9, 10, 11, 12, -1, -1,
+};
+
+static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+	int line = irq2gpio[irq];
+	u32 int_style;
+	enum ixp4xx_irq_type irq_type;
+	volatile u32 *int_reg;
+
+	/*
+	 * Only for GPIO IRQs
+	 */
+	if (line < 0)
+		return -EINVAL;
+
+	if (type & IRQT_BOTHEDGE) {
+		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else  if (type & IRQT_RISING) {
+		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else if (type & IRQT_FALLING) {
+		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else if (type & IRQT_HIGH) {
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
+		irq_type = IXP4XX_IRQ_LEVEL;
+	} else if (type & IRQT_LOW) {
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
+		irq_type = IXP4XX_IRQ_LEVEL;
+	}
+
+	ixp4xx_config_irq(irq, irq_type);
+
+	if (line >= 8) {	/* pins 8-15 */
+		line -= 8;
+		int_reg = IXP4XX_GPIO_GPIT2R;
+	} else {		/* pins 0-7 */
+		int_reg = IXP4XX_GPIO_GPIT1R;
+	}
+
+	/* Clear the style for the appropriate pin */
+	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
+	    		(line * IXP4XX_GPIO_STYLE_SIZE));
+
+	/* Set the new style */
+	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+}
+
 static void ixp4xx_irq_mask(unsigned int irq)
 {
 	if (cpu_is_ixp46x() && irq >= 32)
@@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq)
 
 static void ixp4xx_irq_ack(unsigned int irq)
 {
-	static int irq2gpio[32] = {
-		-1, -1, -1, -1, -1, -1,  0,  1,
-		-1, -1, -1, -1, -1, -1, -1, -1,
-		-1, -1, -1,  2,  3,  4,  5,  6,
-		 7,  8,  9, 10, 11, 12, -1, -1,
-	};
 	int line = (irq < 32) ? irq2gpio[irq] : -1;
 
 	if (line >= 0)
@@ -209,12 +182,14 @@ static struct irqchip ixp4xx_irq_level_chip = {
 	.ack	= ixp4xx_irq_mask,
 	.mask	= ixp4xx_irq_mask,
 	.unmask	= ixp4xx_irq_level_unmask,
+	.type	= ixp4xx_set_irq_type
 };
 
 static struct irqchip ixp4xx_irq_edge_chip = {
 	.ack	= ixp4xx_irq_ack,
 	.mask	= ixp4xx_irq_mask,
 	.unmask	= ixp4xx_irq_unmask,
+	.type	= ixp4xx_set_irq_type
 };
 
 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index afafb42ae129..60de8a94cff5 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
 void __init coyote_pci_preinit(void)
 {
-	gpio_line_config(COYOTE_PCI_SLOT0_PIN,
-			IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-
-	gpio_line_config(COYOTE_PCI_SLOT1_PIN,
-			IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
 
 	gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
 	gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 411ea9996190..8b2f25322452 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -24,11 +24,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-void __init coyote_map_io(void)
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data coyote_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -107,7 +102,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= coyote_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -125,7 +120,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= coyote_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index b18035824e3e..a66484b63d36 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void);
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
-        /*
-        * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
-        * Slot 0 isn't actually populated with a card connector but
-        * we initialize it anyway in case a future version has the
-        * slot populated or someone with good soldering skills has
-        * some free time.
-        */
-
-
-static void gtwx5715_init_gpio(u8 pin, u32 style)
-{
-	gpio_line_config(pin, style | IXP4XX_GPIO_ACTIVE_LOW);
-
-	if (style & IXP4XX_GPIO_IN) gpio_line_isr_clear(pin);
-}
 
+/*
+ * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
+ * Slot 0 isn't actually populated with a card connector but
+ * we initialize it anyway in case a future version has the
+ * slot populated or someone with good soldering skills has
+ * some free time.
+ */
 void __init gtwx5715_pci_preinit(void)
 {
-	gtwx5715_init_gpio(GTWX5715_PCI_SLOT0_INTA_GPIO,	IXP4XX_GPIO_IN);
-	gtwx5715_init_gpio(GTWX5715_PCI_SLOT1_INTA_GPIO,	IXP4XX_GPIO_IN);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 333459d6aa46..3fd92c5cbaa8 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -101,12 +101,6 @@ static struct platform_device gtwx5715_uart_device = {
 	.resource	= gtwx5715_uart_resources,
 };
 
-
-void __init gtwx5715_map_io(void)
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data gtwx5715_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -144,7 +138,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_UART2_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= gtwx5715_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index c2ab9ebb5980..f9a1d3e7d692 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -27,14 +27,10 @@
 
 void __init ixdp425_pci_preinit(void)
 {
-	gpio_line_config(IXDP425_PCI_INTA_PIN,
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTB_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTC_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTD_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
 
 	gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
 	gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index fa0646c8693b..6c14ff3c23a0 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,11 +24,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-void __init ixdp425_map_io(void) 
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data ixdp425_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -133,7 +128,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -145,7 +140,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -157,7 +152,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -176,7 +171,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index ce4563f00676..fe5e7660de1d 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
 void __init ixdpg425_pci_preinit(void)
 {
-	gpio_line_config(6, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(7, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
 
 	gpio_line_isr_clear(6);
 	gpio_line_isr_clear(7);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 9a66050e887d..f59608268751 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -388,6 +388,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 				unsigned long hclk,
 				unsigned long pclk)
 {
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
 	struct clk *clkp = init_clocks;
 	int ptr;
 	int ret;
@@ -446,5 +447,13 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 		}
 	}
 
+	/* show the clock-slow value */
+
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(xtal / ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
+
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index b018a1f680ce..c67e0979aec3 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -68,6 +68,7 @@ static struct clk s3c2440_clk_ac97 = {
 static int s3c2440_clk_add(struct sys_device *sysdev)
 {
 	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
 	struct clk *clk_h;
 	struct clk *clk_p;
 	struct clk *clk_xtal;
@@ -80,8 +81,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 
 	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
 
-	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
-	       print_mhz(s3c2440_clk_upll.rate));
+	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
+	       print_mhz(s3c2440_clk_upll.rate),
+	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
 
 	clk_p = clk_get(NULL, "pclk");
 	clk_h = clk_get(NULL, "hclk");
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 81f4a8a2d34b..4b39d867ac14 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -45,7 +45,7 @@
 
 #define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
 
-#define LDSTH_I_BIT(i)	(i & (1 << 22))		/* half-word immed	*/
+#define LDSTHD_I_BIT(i)	(i & (1 << 22))		/* double/half-word immed */
 #define LDM_S_BIT(i)	(i & (1 << 22))		/* write CPSR from SPSR	*/
 
 #define RN_BITS(i)	((i >> 16) & 15)	/* Rn			*/
@@ -68,6 +68,7 @@ static unsigned long ai_sys;
 static unsigned long ai_skipped;
 static unsigned long ai_half;
 static unsigned long ai_word;
+static unsigned long ai_dword;
 static unsigned long ai_multi;
 static int ai_usermode;
 
@@ -93,6 +94,8 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 	p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
 	p += sprintf(p, "Half:\t\t%lu\n", ai_half);
 	p += sprintf(p, "Word:\t\t%lu\n", ai_word);
+	if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
+		p += sprintf(p, "DWord:\t\t%lu\n", ai_dword);
 	p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
 	p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
 			usermode_action[ai_usermode]);
@@ -283,12 +286,6 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 {
 	unsigned int rd = RD_BITS(instr);
 
-	if ((instr & 0x01f00ff0) == 0x01000090)
-		goto swp;
-
-	if ((instr & 0x90) != 0x90 || (instr & 0x60) == 0)
-		goto bad;
-
 	ai_half += 1;
 
 	if (user_mode(regs))
@@ -323,10 +320,47 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 
  	return TYPE_LDST;
 
- swp:
-	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
- bad:
-	return TYPE_ERROR;
+ fault:
+	return TYPE_FAULT;
+}
+
+static int
+do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
+		      struct pt_regs *regs)
+{
+	unsigned int rd = RD_BITS(instr);
+
+	ai_dword += 1;
+
+	if (user_mode(regs))
+		goto user;
+
+	if ((instr & 0xf0) == 0xd0) {
+		unsigned long val;
+		get32_unaligned_check(val, addr);
+		regs->uregs[rd] = val;
+		get32_unaligned_check(val, addr+4);
+		regs->uregs[rd+1] = val;
+	} else {
+		put32_unaligned_check(regs->uregs[rd], addr);
+		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+	}
+
+	return TYPE_LDST;
+
+ user:
+	if ((instr & 0xf0) == 0xd0) {
+		unsigned long val;
+		get32t_unaligned_check(val, addr);
+		regs->uregs[rd] = val;
+		get32t_unaligned_check(val, addr+4);
+		regs->uregs[rd+1] = val;
+	} else {
+		put32t_unaligned_check(regs->uregs[rd], addr);
+		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+	}
+
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -617,12 +651,20 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
 
 	switch (CODING_BITS(instr)) {
-	case 0x00000000:	/* ldrh or strh */
-		if (LDSTH_I_BIT(instr))
+	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
+		if (LDSTHD_I_BIT(instr))
 			offset.un = (instr & 0xf00) >> 4 | (instr & 15);
 		else
 			offset.un = regs->uregs[RM_BITS(instr)];
-		handler = do_alignment_ldrhstrh;
+
+		if ((instr & 0x000000f0) == 0x000000b0 || /* LDRH, STRH */
+		    (instr & 0x001000f0) == 0x001000f0)   /* LDRSH */
+			handler = do_alignment_ldrhstrh;
+		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
+			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
+			handler = do_alignment_ldrdstrd;
+		else
+			goto bad;
 		break;
 
 	case 0x04000000:	/* ldr or str immediate */
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 3c655c54e231..4dae00bf7a56 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -275,11 +275,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
 	int i;
 
 	for (i = 0; i < 16; i += 1) {
-		alloc_init_section(virt, phys & SUPERSECTION_MASK,
-				   prot | PMD_SECT_SUPER);
+		alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
 
 		virt += (PGDIR_SIZE / 2);
-		phys += (PGDIR_SIZE / 2);
 	}
 }