Merge branch 'at91/dt' into next/drivers

Merging at91/dt as a prereq for the at91/drivers code.

* at91/dt: (43 commits)
  ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
  ARM: at91: dt: at91rm9200ek: add emac and nor flash support
  ARM: at91: add uart aliases to sama5d3 dtsi
  ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
  ARM: at91: Animeo IP: fix mtd partition table
  ARM: at91: at91sam9g45: add i2c pinctrl
  ARM: at91: at91sam9g45: set default mmc pinctrl-names
  ARM: at91: sama5d3: enable qt1070 as a wakeup source
  ARM: at91: add support for Cosino board series by HCE Engineering
  ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
  ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
  ARM: at91/dt/trivial: use macro for AES irq type
  ARM: at91: sam9263ek: add dt lcd support
  ARM: at91: at9sam9m10g45ek: add dt lcd support
  ARM: at91: sam9263: add fb dt support
  ARM: at91: sam9g45: add fb dt support
  ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
  ARM: at91/dt: binding: add precision to AIC documentation
  ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
  ARM: at91/dt: add ethernet phy to at91rm9200ek board
  ...

40 files changed, 1038 insertions, 603 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a65b24f..772a30e06e48 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
 # sam9x5
 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3a1de9eb5111..3c4f6d983cbd 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -90,34 +90,19 @@
 			nand-on-flash-bbt;
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x8000>;
-			};
-
-			barebox@8000 {
+			barebox@0 {
 				label = "barebox";
-				reg = <0x8000 0x40000>;
-			};
-
-			bareboxenv@48000 {
-				label = "bareboxenv";
-				reg = <0x48000 0x8000>;
-			};
-
-			user_block@0x50000 {
-				label = "user_block";
-				reg = <0x50000 0xb0000>;
+				reg = <0x0 0x58000>;
 			};
 
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x1b0000>;
+			u_boot_env@58000 {
+				label = "u_boot_env";
+				reg = <0x58000 0x8000>;
 			};
 
-			root@2b0000 {
-				label = "root";
-				reg = <0x2b0000 0x1D50000>;
+			ubi@60000 {
+				label = "ubi";
+				reg = <0x60000 0x1FA0000>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
new file mode 100644
index 000000000000..2093c4d7cd6a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -0,0 +1,122 @@
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "u-boot";
+				reg = <0x40000 0x80000>;
+			};
+
+			ubootenv@c0000 {
+				label = "U-Boot Env";
+				reg = <0xc0000 0x140000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
new file mode 100644
index 000000000000..f9415dd11f17
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -0,0 +1,84 @@
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+
+			tsadcc: tsadcc@f804c000 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+
+			usart1: serial@f8020000 {
+				status = "okay";
+			};
+
+			usart2: serial@f8024000 {
+				status = "okay";
+			};
+
+			usb2: gadget@f803c000 {
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc1: mmc@f000c000 {
+				pinctrl-0 = <
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					non-removable;
+				};
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+					   &pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index f77065506f1e..c61b16fba79b 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -191,12 +191,12 @@
 							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
 					};
 
-					pinctrl_uart0_rts: uart0_rts-0 {
+					pinctrl_uart0_cts: uart0_cts-0 {
 						atmel,pins =
 							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
 					};
 
-					pinctrl_uart0_cts: uart0_cts-0 {
+					pinctrl_uart0_rts: uart0_rts-0 {
 						atmel,pins =
 							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
 					};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index d2d72c3b44c4..df6b0aa0e4dd 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -29,10 +29,22 @@
 
 	ahb {
 		apb {
-			dbgu: serial@fffff200 {
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy {
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+
 			usart1: serial@fffc4000 {
 				pinctrl-0 =
 						<&pinctrl_uart1
@@ -44,16 +56,6 @@
 				status = "okay";
 			};
 
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
@@ -63,12 +65,45 @@
 					reg = <0>;
 				};
 			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
+
+		nor_flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x800000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			barebox@0 {
+				label = "barebox";
+				reg = <0x00000 0x40000>;
+			};
+
+			bareboxenv@40000 {
+				label = "bareboxenv";
+				reg = <0x40000 0x10000>;
+			};
+
+			kernel@50000 {
+				label = "kernel";
+				reg = <0x50000 0x300000>;
+			};
+
+			root@350000  {
+				label = "root";
+				reg = <0x350000 0x4B0000>;
+			};
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index d5bd65f74602..22e255ab6963 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -366,6 +366,34 @@
 					};
 				};
 
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -549,6 +577,15 @@
 			};
 		};
 
+		fb0: fb@0x00700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			status = "disabled";
+		};
+
 		nand0: nand@40000000 {
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 70f835b55c0b..15009c9f2293 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -95,6 +95,36 @@
 			};
 		};
 
+		fb0: fb@0x00700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c3e514837074..d7af9ecb85d2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -143,6 +143,22 @@
 					};
 				};
 
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -425,6 +441,42 @@
 					};
 				};
 
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -542,6 +594,8 @@
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff84000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -551,6 +605,8 @@
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -618,6 +674,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -629,6 +686,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -727,6 +785,15 @@
 			};
 		};
 
+		fb0: fb@0x00500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			status = "disabled";
+		};
+
 		nand0: nand@40000000 {
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index a4b00e5c61c0..7b76dbde8c41 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -123,6 +123,35 @@
 			};
 		};
 
+		fb0: fb@0x00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 5cdaba4cea86..070c5c3a2291 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/at91.h>
 
 / {
 	model = "Atmel SAMA5D3 family SoC";
@@ -56,6 +57,14 @@
 		reg = <0x20000000 0x8000000>;
 	};
 
+	clocks {
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -79,6 +88,8 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 			};
 
 			spi0: spi@f0004000 {
@@ -92,6 +103,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -101,6 +114,8 @@
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -108,6 +123,8 @@
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			i2c0: i2c@f0014000 {
@@ -121,6 +138,7 @@
 				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -135,6 +153,7 @@
 				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -144,6 +163,8 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -153,6 +174,8 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -174,6 +197,8 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
 			};
 
 			spi1: spi@f8008000 {
@@ -187,6 +212,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -196,6 +223,8 @@
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -219,6 +248,9 @@
 					&pinctrl_adc0_ad10
 					&pinctrl_adc0_ad11
 					>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channel-base = <0x50>;
 				atmel,adc-channels-used = <0xfff>;
 				atmel,adc-drdy-mask = <0x1000000>;
@@ -272,8 +304,11 @@
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
 				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&twi2_clk>;
 				status = "disabled";
 			};
 
@@ -283,6 +318,8 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -292,25 +329,35 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
 			sha@f8034000 {
-				compatible = "atmel,sam9g46-sha";
+				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf8034000 0x100>;
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
 			};
 
 			aes@f8038000 {
-				compatible = "atmel,sam9g46-aes";
+				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf8038000 0x100>;
-				interrupts = <43 4 0>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
 			};
 
 			tdes@f803c000 {
-				compatible = "atmel,sam9g46-tdes";
+				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
 			};
 
 			dma0: dma-controller@ffffe600 {
@@ -318,6 +365,8 @@
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			dma1: dma-controller@ffffe800 {
@@ -325,6 +374,8 @@
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
 			};
 
 			ramc0: ramc@ffffea00 {
@@ -338,6 +389,8 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -443,6 +496,14 @@
 					};
 				};
 
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+				};
+
 				isi {
 					pinctrl_isi: isi-0 {
 						atmel,pins =
@@ -626,6 +687,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -636,6 +698,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -646,6 +709,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -656,6 +720,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -666,12 +731,334 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioE_clk>;
 				};
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,sama5d3-pmc";
 				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				clk32k: slck {
+					compatible = "fixed-clock";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&clk32k>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <8000000 50000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 166000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dbgu_clk: dbgu_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					pioD_clk: pioD_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					pioE_clk: pioE_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <18>;
+						#clock-cells = <0>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					twi2_clk: twi2_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+						atmel,clk-output-range = <0 16625000>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					mci1_clk: mci1_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+						atmel,clk-output-range = <0 133000000>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <39>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					tdes_clk: tdes_clk {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					fuse_clk: fuse_clk {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+				};
 			};
 
 			rstc@fffffe00 {
@@ -683,6 +1070,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&mck>;
 			};
 
 			watchdog@fffffe40 {
@@ -705,6 +1093,8 @@
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
 			status = "disabled";
 
 			ep0 {
@@ -817,6 +1207,9 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -824,6 +1217,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index 8ed3260cef66..a0775851cce5 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -32,12 +32,30 @@
 
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					can1_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
 			can0: can@f000c000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf000c000 0x300>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
 				status = "disabled";
 			};
 
@@ -47,6 +65,8 @@
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
index 4d4f351f1f9f..fe2af9276312 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -31,12 +31,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+				};
+			};
+
 			macb1: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
index 0ba8be30ccd8..a6cb0508762f 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -64,12 +64,23 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+				};
+			};
+
 			macb0: ethernet@f0028000 {
 				compatible = "cdns,pc302-gem", "cdns,gem";
 				reg = <0xf0028000 0x100>;
 				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 01f52a79f8ba..85d302701565 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -50,6 +50,23 @@
 					};
 				};
 			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+				};
+
+				systemck {
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 38e88e39e551..b029fe7ef17a 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
 
 / {
 	ahb {
@@ -30,6 +31,15 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					mci2_clk: mci2_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
 			mmc2: mmc@f8004000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
@@ -38,6 +48,8 @@
 				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&mci2_clk>;
+				clock-names = "mci_clk";
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 5264bb4a6998..382b04431f66 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
 
 / {
 	aliases {
@@ -17,10 +18,21 @@
 
 	ahb {
 		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					tcb1_clk: tcb1_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
 			tcb1: timer@f8014000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>;
+				clock-names = "t0_clk";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 98fcb2d57446..a9fa75e41652 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,8 +9,14 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
 
 / {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff200 {
@@ -31,12 +37,30 @@
 				};
 			};
 
+			pmc: pmc@fffffc00 {
+				periphck {
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x200>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -46,6 +70,8 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 726a0f35100c..f55ed072c8e6 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -18,17 +18,6 @@
 		reg = <0x20000000 0x20000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
 	ahb {
 		apb {
 			spi0: spi@f0004000 {
@@ -38,6 +27,12 @@
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
 			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
index 1c296d6b2f2a..f9bdde542ced 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xdm.dtsi
@@ -18,6 +18,7 @@
 					interrupts = <31 0x0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
 				};
 			};
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 699b71e7f7ec..b4f7d6ffa30b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,15 +1,33 @@
 if ARCH_AT91
 
+config HAVE_AT91_UTMI
+	bool
+
+config HAVE_AT91_USB_CLK
+	bool
+
 config HAVE_AT91_DBGU0
 	bool
 
 config HAVE_AT91_DBGU1
 	bool
 
+config AT91_USE_OLD_CLK
+	bool
+
 config AT91_PMC_UNIT
 	bool
 	default !ARCH_AT91X40
 
+config COMMON_CLK_AT91
+	bool
+	default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
+	select COMMON_CLK
+
+config OLD_CLK_AT91
+	bool
+	default AT91_PMC_UNIT && AT91_USE_OLD_CLK
+
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -21,6 +39,9 @@ config AT91_SAM9G45_RESET
 config AT91_SAM9_TIME
 	bool
 
+config HAVE_AT91_SMD
+	bool
+
 config SOC_AT91SAM9
 	bool
 	select AT91_SAM9_TIME
@@ -65,6 +86,9 @@ config SOC_SAMA5D3
 	select SOC_SAMA5
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU1
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
@@ -78,11 +102,15 @@ config SOC_AT91RM9200
 	select HAVE_AT91_DBGU0
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_USB_CLK
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
 	select HAVE_AT91_DBGU0
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
 	  or AT91SAM9G20 SoC.
@@ -92,6 +120,8 @@ config SOC_AT91SAM9261
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
@@ -100,18 +130,25 @@ config SOC_AT91SAM9263
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_USB_CLK
 
 config SOC_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_UTMI
 
 config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
 	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
@@ -121,6 +158,10 @@ config SOC_AT91SAM9X5
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
 	  This means that your SAM9 name finishes with a '5' (except if it is
@@ -133,6 +174,8 @@ config SOC_AT91SAM9N12
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select SOC_AT91SAM9
+	select AT91_USE_OLD_CLK
+	select HAVE_AT91_USB_CLK
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index ca900be144ce..b736b571e882 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -12,26 +12,32 @@ config ARCH_AT91_NONE
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
 	select SOC_AT91RM9200
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
 	select SOC_AT91SAM9260
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261 or AT91SAM9G10"
 	select SOC_AT91SAM9261
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select SOC_AT91SAM9263
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select SOC_AT91SAM9RL
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select SOC_AT91SAM9G45
+	select AT91_USE_OLD_CLK
 
 config ARCH_AT91X40
 	bool "AT91x40"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 90aab2d5a07f..705b38a179ec 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,7 +7,7 @@ obj-m		:=
 obj-n		:=
 obj-		:=
 
-obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
+obj-$(CONFIG_OLD_CLK_AT91)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
 obj-$(CONFIG_AT91_SAM9_TIME)	+= at91sam926x_time.o
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 25805f2f6010..e47f5fd232f5 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -12,13 +12,13 @@
 
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91rm9200.h>
-#include <mach/at91_pmc.h>
 #include <mach/at91_st.h>
 #include <mach/cpu.h>
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d6a1fa85371d..6c821e562159 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
@@ -20,7 +21,6 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9260.h>
-#include <mach/at91_pmc.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 23ba1d8a1531..6276b4c1acfe 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
@@ -19,7 +20,6 @@
 #include <asm/system_misc.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9261.h>
-#include <mach/at91_pmc.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 7eccb0fc57bc..37b90f4b990c 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
@@ -18,7 +19,6 @@
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91sam9263.h>
-#include <mach/at91_pmc.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index bb392320a0dd..0f04ffe9c5a8 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -39,6 +39,7 @@
 static u32 pit_cycle;		/* write-once */
 static u32 pit_cnt;		/* access only w/system irq blocked */
 static void __iomem *pit_base_addr __read_mostly;
+static struct clk *mck;
 
 static inline unsigned int pit_read(unsigned int reg_offset)
 {
@@ -195,10 +196,14 @@ static int __init of_at91sam926x_pit_init(void)
 	if (!pit_base_addr)
 		goto node_err;
 
+	mck = of_clk_get(np, 0);
+
 	/* Get the interrupts property */
 	ret = irq_of_parse_and_map(np, 0);
 	if (!ret) {
 		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
+		if (!IS_ERR(mck))
+			clk_put(mck);
 		goto ioremap_err;
 	}
 	at91sam926x_pit_irq.irq = ret;
@@ -230,6 +235,8 @@ void __init at91sam926x_pit_init(void)
 	unsigned	bits;
 	int		ret;
 
+	mck = ERR_PTR(-ENOENT);
+
 	/* For device tree enabled device: initialize here */
 	of_at91sam926x_pit_init();
 
@@ -237,7 +244,12 @@ void __init at91sam926x_pit_init(void)
 	 * Use our actual MCK to figure out how many MCK/16 ticks per
 	 * 1/HZ period (instead of a compile-time constant LATCH).
 	 */
-	pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
+	if (IS_ERR(mck))
+		mck = clk_get(NULL, "mck");
+
+	if (IS_ERR(mck))
+		panic("AT91: PIT: Unable to get mck clk\n");
+	pit_rate = clk_get_rate(mck) / 16;
 	pit_cycle = (pit_rate + HZ/2) / HZ;
 	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9405aa08b104..2f455ce35268 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,13 +12,13 @@
 
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 #include <mach/at91sam9g45.h>
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include "at91_aic.h"
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 388ec3aec4b9..4ef088c62eab 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -8,12 +8,12 @@
 
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/at91sam9n12.h>
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include "board.h"
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 0750ffb7e6b1..3651517abedf 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
@@ -19,7 +20,6 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91sam9rl.h>
-#include <mach/at91_pmc.h>
 
 #include "at91_aic.h"
 #include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e8a2e075a1b8..3e8ec26e39dc 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -8,12 +8,12 @@
 
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/at91sam9x5.h>
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include "board.h"
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index bf00d15d954d..075ec0576ada 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -16,6 +16,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/clk-provider.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -26,6 +27,13 @@
 #include "at91_aic.h"
 #include "generic.h"
 
+static void __init sama5_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+	of_clk_init(NULL);
+#endif
+	at91sam926x_pit_init();
+}
 
 static const struct of_device_id irq_of_match[] __initconst = {
 
@@ -72,7 +80,7 @@ static const char *sama5_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
 	/* Maintainer: Atmel */
-	.init_time	= at91sam926x_pit_init,
+	.init_time	= sama5_dt_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic5_handle_irq,
 	.init_early	= at91_dt_initialize,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6b2630a92f71..72b257944733 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,9 +24,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <mach/hardware.h>
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include <asm/proc-fns.h>
@@ -884,6 +884,11 @@ static int __init at91_pmc_init(unsigned long main_clock)
 #if defined(CONFIG_OF)
 static struct of_device_id pmc_ids[] = {
 	{ .compatible = "atmel,at91rm9200-pmc" },
+	{ .compatible = "atmel,at91sam9260-pmc" },
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9n12-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ .compatible = "atmel,sama5d3-pmc" },
 	{ /*sentinel*/ }
 };
 
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 26dee3ce9397..631fa3b8c16d 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -46,11 +46,12 @@ extern void at91sam926x_pit_init(void);
 extern void at91x40_timer_init(void);
 
  /* Clocks */
-#ifdef CONFIG_AT91_PMC_UNIT
+#ifdef CONFIG_OLD_CLK_AT91
 extern int __init at91_clock_init(unsigned long main_clock);
 extern int __init at91_dt_clock_init(void);
 #else
 static int inline at91_clock_init(unsigned long main_clock) { return 0; }
+static int inline at91_dt_clock_init(void) { return 0; }
 #endif
 struct device;
 
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
deleted file mode 100644
index c604cc69acb5..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_pmc_base;
-
-#define at91_pmc_read(field) \
-	__raw_readl(at91_pmc_base + field)
-
-#define at91_pmc_write(field, value) \
-	__raw_writel(value, at91_pmc_base + field)
-#else
-.extern at91_pmc_base
-#endif
-
-#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_PCK4		(1 << 12)		/* Programmable Clock 4 [AT572D940HF only] */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
-#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
-#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
-#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
-
-#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
-#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
-#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
-#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
-#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
-#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
-
-#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
-#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_MUL_GET(n)	((n) >> 16 & 0x7ff)
-#define		AT91_PMC3_MUL		(0x7f  << 18)		/* PLL Multiplier [SAMA5 only] */
-#define		AT91_PMC3_MUL_GET(n)	((n) >> 18 & 0x7f)
-#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-#define			AT91_PMC_USBDIV_1		(0 << 28)
-#define			AT91_PMC_USBDIV_2		(1 << 28)
-#define			AT91_PMC_USBDIV_4		(2 << 28)
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
-#define		PMC_PRES_OFFSET		2
-#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
-#define		PMC_ALT_PRES_OFFSET	4
-#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
-#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
-#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
-#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
-#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
-#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
-#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
-#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
-#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
-#define			AT91_PMC_PDIV_1			(0 << 12)
-#define			AT91_PMC_PDIV_2			(1 << 12)
-#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
-#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
-#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
-
-#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
-#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
-#define			AT91_PMC_USBS_PLLA		(0 << 0)
-#define			AT91_PMC_USBS_UPLL		(1 << 0)
-#define			AT91_PMC_USBS_PLLB		(1 << 0)	/* [AT91SAMN12 only] */
-#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
-#define			AT91_PMC_OHCIUSBDIV_1	(0x0 <<  8)
-#define			AT91_PMC_OHCIUSBDIV_2	(0x1 <<  8)
-
-#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
-#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
-#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
-#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
-
-#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
-#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
-#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
-#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
-#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
-#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
-
-#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
-#define	AT91_PMC_SR		0x68			/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
-#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
-#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
-#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */
-
-#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
-#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
-#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
-#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
-
-#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
-#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
-#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
-
-#define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
-#define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
-#define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */
-
-#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9 and SAMA5] */
-#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
-#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
-#define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
-#define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
-#define			AT91_PMC_PCR_DIV2	0x1			/* Peripheral clock is MCK/2 */
-#define			AT91_PMC_PCR_DIV4	0x2			/* Peripheral clock is MCK/4 */
-#define			AT91_PMC_PCR_DIV8	0x3			/* Peripheral clock is MCK/8 */
-#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 9986542e8060..d43b79f56e94 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -19,13 +19,13 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include "at91_aic.h"
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 098c28ddf025..20018779bae7 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -13,8 +13,8 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
 #include <mach/hardware.h>
-#include <mach/at91_pmc.h>
 #include <mach/at91_ramc.h>
 
 
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 3ea86428ee09..3d775d08de08 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -9,360 +9,19 @@
 
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/sama5d3.h>
-#include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pid		= SAMA5D3_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pid		= SAMA5D3_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pid		= SAMA5D3_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.pid		= SAMA5D3_ID_PIOD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioE_clk = {
-	.name		= "pioE_clk",
-	.pid		= SAMA5D3_ID_PIOE,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pid		= SAMA5D3_ID_USART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pid		= SAMA5D3_ID_USART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pid		= SAMA5D3_ID_USART2,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pid		= SAMA5D3_ID_USART3,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk uart0_clk = {
-	.name		= "uart0_clk",
-	.pid		= SAMA5D3_ID_UART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk uart1_clk = {
-	.name		= "uart1_clk",
-	.pid		= SAMA5D3_ID_UART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pid		= SAMA5D3_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pid		= SAMA5D3_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk twi2_clk = {
-	.name		= "twi2_clk",
-	.pid		= SAMA5D3_ID_TWI2,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pid		= SAMA5D3_ID_HSMCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pid		= SAMA5D3_ID_HSMCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc2_clk = {
-	.name		= "mci2_clk",
-	.pid		= SAMA5D3_ID_HSMCI2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pid		= SAMA5D3_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pid		= SAMA5D3_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
-	.name		= "tcb0_clk",
-	.pid		= SAMA5D3_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk tcb1_clk = {
-	.name		= "tcb1_clk",
-	.pid		= SAMA5D3_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pid		= SAMA5D3_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_op_clk = {
-	.name		= "adc_op_clk",
-	.type		= CLK_TYPE_PERIPHERAL,
-	.rate_hz	= 5000000,
-};
-static struct clk dma0_clk = {
-	.name		= "dma0_clk",
-	.pid		= SAMA5D3_ID_DMA0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
-	.name		= "dma1_clk",
-	.pid		= SAMA5D3_ID_DMA1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
-	.name		= "uhphs",
-	.pid		= SAMA5D3_ID_UHPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pid		= SAMA5D3_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* gmac only for sama5d33, sama5d34, sama5d35 */
-static struct clk macb0_clk = {
-	.name		= "macb0_clk",
-	.pid		= SAMA5D3_ID_GMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* emac only for sama5d31, sama5d35 */
-static struct clk macb1_clk = {
-	.name		= "macb1_clk",
-	.pid		= SAMA5D3_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* lcd only for sama5d31, sama5d33, sama5d34 */
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pid		= SAMA5D3_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* isi only for sama5d33, sama5d35 */
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pid		= SAMA5D3_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
-	.name		= "can0_clk",
-	.pid		= SAMA5D3_ID_CAN0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk can1_clk = {
-	.name		= "can1_clk",
-	.pid		= SAMA5D3_ID_CAN1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pid		= SAMA5D3_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pid		= SAMA5D3_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
-};
-static struct clk sha_clk = {
-	.name		= "sha_clk",
-	.pid		= SAMA5D3_ID_SHA,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV8,
-};
-static struct clk aes_clk = {
-	.name		= "aes_clk",
-	.pid		= SAMA5D3_ID_AES,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tdes_clk = {
-	.name		= "tdes_clk",
-	.pid		= SAMA5D3_ID_TDES,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	&pioE_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&uart0_clk,
-	&uart1_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&twi2_clk,
-	&mmc0_clk,
-	&mmc1_clk,
-	&mmc2_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&tcb0_clk,
-	&tcb1_clk,
-	&adc_clk,
-	&adc_op_clk,
-	&dma0_clk,
-	&dma1_clk,
-	&uhphs_clk,
-	&udphs_clk,
-	&macb0_clk,
-	&macb1_clk,
-	&lcdc_clk,
-	&isi_clk,
-	&can0_clk,
-	&can1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&sha_clk,
-	&aes_clk,
-	&tdes_clk,
-};
-
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
-	CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
-	CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
-	CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
-	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
-	CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
-	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
-	CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
-	CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
-	CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
-	CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
-};
-
-static void __init sama5d3_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-}
-
-/* --------------------------------------------------------------------
  *  AT91SAM9x5 processor initialization
  * -------------------------------------------------------------------- */
 
@@ -378,6 +37,5 @@ static void __init sama5d3_initialize(void)
 
 AT91_SOC_START(sama5d3)
 	.map_io = sama5d3_map_io,
-	.register_clocks = sama5d3_register_clocks,
 	.init = sama5d3_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 094b3459c288..7d3f7cc61081 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/of_address.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/clk/at91_pmc.h>
 
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
@@ -18,7 +19,6 @@
 #include <mach/hardware.h>
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
 
 #include "at91_shdwc.h"
 #include "soc.h"
@@ -491,7 +491,8 @@ void __init at91rm9200_dt_initialize(void)
 	at91_dt_clock_init();
 
 	/* Register the processor-specific clocks */
-	at91_boot_soc.register_clocks();
+	if (at91_boot_soc.register_clocks)
+		at91_boot_soc.register_clocks();
 
 	at91_boot_soc.init();
 }
@@ -506,7 +507,8 @@ void __init at91_dt_initialize(void)
 	at91_dt_clock_init();
 
 	/* Register the processor-specific clocks */
-	at91_boot_soc.register_clocks();
+	if (at91_boot_soc.register_clocks)
+		at91_boot_soc.register_clocks();
 
 	if (at91_boot_soc.init)
 		at91_boot_soc.init();