Merge branch 'pxa-plat' into devel

* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

	arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

52 files changed, 8631 insertions, 1035 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6835a4c8affa..de211ac3853e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -356,6 +356,7 @@ config ARCH_PXA
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -895,7 +896,7 @@ config KEXEC
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
 
 menu "CPU Frequency scaling"
 
@@ -931,6 +932,12 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
+config CPU_FREQ_PXA
+	bool
+	depends on CPU_FREQ && ARCH_PXA && PXA25x
+	default y
+	select CPU_FREQ_DEFAULT_GOV_USERSPACE
+
 endmenu
 
 endif
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
new file mode 100644
index 000000000000..c3e3418ed4fe
--- /dev/null
+++ b/arch/arm/configs/colibri_defconfig
@@ -0,0 +1,1481 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc3
+# Mon Dec  3 13:36:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=y
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_ZD1211RW is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_PXA is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
new file mode 100644
index 000000000000..ed487b90dbed
--- /dev/null
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -0,0 +1,1499 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-hh17
+# Fri Nov  9 20:23:03 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+CONFIG_BOARD_IRQ_MAP_BIG=y
+CONFIG_DMABOUNCE=y
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_TOSHIBA_TMIO_OHCI=y
+CONFIG_ARCH_ESERIES=y
+CONFIG_MACH_E330=y
+CONFIG_MACH_E740=y
+CONFIG_MACH_E750=y
+CONFIG_MACH_E400=y
+CONFIG_MACH_E800=y
+CONFIG_E330_LCD=y
+CONFIG_E740_LCD=y
+CONFIG_E750_LCD=y
+CONFIG_E400_LCD=y
+CONFIG_E800_LCD=y
+CONFIG_ESERIES_UDC=y
+CONFIG_E330_TC6387XB=y
+CONFIG_E740_T7L66XB=y
+CONFIG_E400_T7L66XB=y
+CONFIG_E750_E800_TC6393XB=y
+CONFIG_E740_PCMCIA=m
+CONFIG_E750_PCMCIA=m
+CONFIG_E800_PCMCIA=m
+# CONFIG_MACH_A620 is not set
+# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
+# CONFIG_ARCH_H1900 is not set
+# CONFIG_ARCH_H2200 is not set
+# CONFIG_MACH_H3900 is not set
+# CONFIG_MACH_H4000 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_ARCH_H5400 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+
+#
+# HTC_HW6X00
+#
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
+# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_X50 is not set
+# CONFIG_ARCH_ROVERP1 is not set
+# CONFIG_ARCH_ROVERP5P is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_T3XSCALE is not set
+# CONFIG_MACH_RECON is not set
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
+# CONFIG_MACH_LOOXC550 is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_PXA25x=y
+
+#
+# Linux As Bootloader
+#
+# CONFIG_LAB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+# CONFIG_TXTOFFSET_DELTA is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_DPM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_ACX is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+# CONFIG_RS232_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_SA1100_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_POWER_SUPPLY is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_ADC is not set
+
+#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_SLEEVE is not set
+# CONFIG_SLEEVE_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_BBKEYS is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+CONFIG_SOC_T7L66XB=y
+# CONFIG_SOC_TC6387XB is not set
+CONFIG_SOC_TC6393XB=y
+# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_IMAGEON is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+CONFIG_FONT_ACORN_8x8=y
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_RECON is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+
+#
+# SoC Platforms
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
+# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
+# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
+# CONFIG_SND_PXA2XX_SOC_H5000 is not set
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8976 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+CONFIG_SND_SOC_WM9705=m
+# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_MQ11XX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_PXA is not set
+CONFIG_MMC_TMIO=y
+# CONFIG_MMC_SAMCOP is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
new file mode 100644
index 000000000000..1db496908052
--- /dev/null
+++ b/arch/arm/configs/littleton_defconfig
@@ -0,0 +1,783 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc5
+# Fri Dec 21 11:06:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+CONFIG_MACH_LITTLETON=y
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
new file mode 100644
index 000000000000..17b9b2469570
--- /dev/null
+++ b/arch/arm/configs/pcm027_defconfig
@@ -0,0 +1,1096 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Dec 21 10:52:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_PCM027=y
+CONFIG_MACH_PCM990_BASEBOARD=y
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=m
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index d5f6ea14fc7b..f550b19e1ecd 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -76,7 +76,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= INT_730_MPU_EXT_NIRQ,
 		.end	= 0,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 9393824cc150..bfa04fa25524 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -209,7 +209,7 @@ static struct resource h2_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(0),
 		.end	= OMAP_GPIO_IRQ(0),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 978cdab16535..056519860565 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -208,7 +208,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(40),
 		.end	= OMAP_GPIO_IRQ(40),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 7e63a41e37c6..7d2d8af155a3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -202,7 +202,7 @@ static struct resource innovator1510_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP1510_INT_ETHER,
 		.end	= OMAP1510_INT_ETHER,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
@@ -269,7 +269,7 @@ static struct resource innovator1610_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(0),
 		.end	= OMAP_GPIO_IRQ(0),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4e016179f312..84333440008c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -111,7 +111,7 @@ static struct resource osk5912_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(0),
 		.end	= OMAP_GPIO_IRQ(0),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e44437e10eef..534dcfb9d263 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -75,7 +75,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= INT_730_MPU_EXT_NIRQ,
 		.end	= 0,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 214dd19889ac..c82a1cd20ad4 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -117,7 +117,7 @@ static struct resource voiceblue_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(8),
 		.end	= OMAP_GPIO_IRQ(8),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7e76fbf19b5d..64235dee5614 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -104,7 +104,7 @@ static struct resource sdp2430_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 94e38cc2bb6c..7846551f0575 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -126,7 +126,7 @@ static struct resource apollon_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 656d49661a29..0908bea0f609 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,50 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select PXA25x
+
+config MACH_E330
+	bool "Toshiba e330"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
+
+config MACH_E740
+	bool "Toshiba e740"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
+
+config MACH_E750
+	bool "Toshiba e750"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
+
+config MACH_E400
+	bool "Toshiba e400"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
+
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
+
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
@@ -59,15 +103,44 @@ config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
 
+config MACH_COLIBRI
+	bool "Toradex Colibri PX27x"
+	select PXA27x
+
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform"
 	select PXA3xx
 
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select PXA_SSP
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
 	select IWMMXT
 
+config MACH_MAGICIAN
+	bool "Enable HTC Magician Support"
+	depends on ARCH_PXA
+	select PXA27x
+	select IWMMXT
+
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+	select PXA27x
+	select IWMMXT
+
+endchoice
+
+choice
+	prompt "Used baseboard"
+	depends on MACH_PCM027
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+
 endchoice
 
 if PXA_SHARPSL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4263527e5123..b5c916c0747d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y				+= clock.o generic.o irq.o dma.o time.o
+obj-y				+= clock.o devices.o generic.o irq.o dma.o time.o
 obj-$(CONFIG_PXA25x)		+= pxa25x.o
 obj-$(CONFIG_PXA27x)		+= pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o
@@ -16,18 +16,24 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
+obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
   obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 
@@ -41,13 +47,10 @@ led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
 # Misc features
-obj-$(CONFIG_PM)		+= pm.o sleep.o
+obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
 
-ifeq ($(CONFIG_PXA27x),y)
-obj-$(CONFIG_PM)		+= standby.o
-endif
-
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index a16349272f54..28cfd71c032d 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -487,18 +487,15 @@ static int cmx270_mci_init(struct device *dev,
 
 	/* card detect IRQ on GPIO 83 */
 	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
-	set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
 		       " request MMC card detect IRQ\n");
-		return -1;
-	}
 
-	return 0;
+	return err;
 }
 
 static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
new file mode 100644
index 000000000000..6db54e31c397
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri.c
@@ -0,0 +1,134 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri.c
+ *
+ *  Support for Toradex PXA27x based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * Flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00040000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= colibri_partitions,
+		.nr_parts	= ARRAY_SIZE(colibri_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = colibri_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= COLIBRI_ETH_PHYS,
+		.end	= COLIBRI_ETH_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= COLIBRI_ETH_PHYS + 4,
+		.end	= COLIBRI_ETH_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= COLIBRI_ETH_IRQ,
+		.end	= COLIBRI_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+
+static struct platform_device *colibri_devices[] __initdata = {
+	&flash_device,
+	&dm9000_device,
+};
+
+static void __init colibri_init(void)
+{
+	/* DM9000 LAN */
+	pxa_gpio_mode(GPIO78_nCS_2_MD);
+	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
+
+	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 2363cc64fe07..9292576b83b3 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -21,6 +21,7 @@
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -141,6 +142,136 @@ struct corgissp_machinfo corgi_ssp_machinfo = {
 
 
 /*
+ * LCD/Framebuffer
+ */
+static void w100_lcdtg_suspend(struct w100fb_par *par)
+{
+	corgi_lcdtg_suspend();
+}
+
+static void w100_lcdtg_init(struct w100fb_par *par)
+{
+	corgi_lcdtg_hw_init(par->xres);
+}
+
+
+static struct w100_tg_info corgi_lcdtg_info = {
+	.change  = w100_lcdtg_init,
+	.suspend = w100_lcdtg_suspend,
+	.resume  = w100_lcdtg_init,
+};
+
+static struct w100_mem_info corgi_fb_mem = {
+	.ext_cntl          = 0x00040003,
+	.sdram_mode_reg    = 0x00650021,
+	.ext_timing_cntl   = 0x10002a4a,
+	.io_cntl           = 0x7ff87012,
+	.size              = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+	.lcd_format    = 0x00000003,
+	.lcdd_cntl1    = 0x01CC0000,
+	.lcdd_cntl2    = 0x0003FFFF,
+	.genlcd_cntl1  = 0x00FFFF0D,
+	.genlcd_cntl2  = 0x003F3003,
+	.genlcd_cntl3  = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+	.init_data1   = 0x000000bf,
+	.init_data2   = 0x00000000,
+	.gpio_dir1    = 0x00000000,
+	.gpio_oe1     = 0x03c0feff,
+	.gpio_dir2    = 0x00000000,
+	.gpio_oe2     = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+	.xres            = 480,
+	.yres            = 640,
+	.left_margin     = 0x56,
+	.right_margin    = 0x55,
+	.upper_margin    = 0x03,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x82360056,
+	.crtc_ls         = 0xA0280000,
+	.crtc_gs         = 0x80280028,
+	.crtc_vpos_gs    = 0x02830002,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 75,
+	.fast_pll_freq   = 100,
+	.sysclk_src      = CLK_SRC_PLL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_PLL,
+	.pixclk_divider  = 2,
+	.pixclk_divider_rotated = 6,
+},{
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 0x27,
+	.right_margin    = 0x2e,
+	.upper_margin    = 0x01,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x81170027,
+	.crtc_ls         = 0xA0140000,
+	.crtc_gs         = 0xC0140014,
+	.crtc_vpos_gs    = 0x00010141,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 0,
+	.fast_pll_freq   = 0,
+	.sysclk_src      = CLK_SRC_XTAL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_XTAL,
+	.pixclk_divider  = 1,
+	.pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+	.tg         = &corgi_lcdtg_info,
+	.init_mode  = INIT_MODE_ROTATED,
+	.mem        = &corgi_fb_mem,
+	.regs       = &corgi_fb_regs,
+	.modelist   = &corgi_fb_modes[0],
+	.num_modes  = 2,
+	.gpio       = &corgi_fb_gpio,
+	.xtal_freq  = 12500000,
+	.xtal_dbl   = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+	[0] = {
+		.start   = 0x08000000,
+		.end     = 0x08ffffff,
+		.flags   = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device corgifb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
+	.resource	= corgi_fb_resources,
+	.dev            = {
+		.platform_data = &corgi_fb_info,
+		.parent = &corgissp_device.dev,
+	},
+
+};
+
+
+/*
  * Corgi Backlight Device
  */
 static void corgi_bl_kick_battery(void)
@@ -154,6 +285,21 @@ static void corgi_bl_kick_battery(void)
 	}
 }
 
+static void corgi_bl_set_intensity(int intensity)
+{
+	if (intensity > 0x10)
+		intensity += 0x10;
+
+	/* Bits 0-4 are accessed via the SSP interface */
+	corgi_ssp_blduty_set(intensity & 0x1f);
+
+	/* Bit 5 is via SCOOP */
+	if (intensity & 0x0020)
+		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+	else
+		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+}
+
 static struct generic_bl_info corgi_bl_machinfo = {
 	.name = "corgi-bl",
 	.max_intensity = 0x2f,
@@ -190,9 +336,40 @@ static struct platform_device corgiled_device = {
 	.id		= -1,
 };
 
+
 /*
  * Corgi Touch Screen Device
  */
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static unsigned long corgi_get_hsync_invperiod(void)
+{
+	if (!get_hsync_invperiod)
+		get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
+	if (!get_hsync_invperiod)
+		return 0;
+
+	return get_hsync_invperiod(&corgifb_device.dev);
+}
+
+static void corgi_put_hsync(void)
+{
+	if (get_hsync_invperiod)
+		symbol_put(w100fb_get_hsynclen);
+	get_hsync_invperiod = NULL;
+}
+
+static void corgi_wait_hsync(void)
+{
+	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
+}
+
 static struct resource corgits_resources[] = {
 	[0] = {
 		.start		= CORGI_IRQ_GPIO_TP_INT,
@@ -202,9 +379,9 @@ static struct resource corgits_resources[] = {
 };
 
 static struct corgits_machinfo  corgi_ts_machinfo = {
-	.get_hsync_len   = corgi_get_hsync_len,
-	.put_hsync       = corgi_put_hsync,
-	.wait_hsync      = corgi_wait_hsync,
+	.get_hsync_invperiod = corgi_get_hsync_invperiod,
+	.put_hsync           = corgi_put_hsync,
+	.wait_hsync          = corgi_wait_hsync,
 };
 
 static struct platform_device corgits_device = {
@@ -242,12 +419,10 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
 	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
 
-	return 0;
+	return err;
 }
 
 static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 365b9435f748..9328df37afd1 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode)
 
 static int lcd_inited;
 
-static void lcdtg_hw_init(int mode)
+void corgi_lcdtg_hw_init(int mode)
 {
 	if (!lcd_inited) {
 		int comadj;
@@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode)
 	}
 }
 
-static void lcdtg_suspend(void)
+void corgi_lcdtg_suspend(void)
 {
 	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
 	mdelay(34);
@@ -288,298 +288,3 @@ static void lcdtg_suspend(void)
 	lcd_inited = 0;
 }
 
-
-/*
- * Corgi w100 Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-
-#include <video/w100fb.h>
-
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-	lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-	lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-	.change  = w100_lcdtg_init,
-	.suspend = w100_lcdtg_suspend,
-	.resume  = w100_lcdtg_init,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.tg         = &corgi_lcdtg_info,
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
- 		.platform_data = &corgi_fb_info,
- 		.parent = &corgissp_device.dev,
-	},
-
-};
-#endif
-
-
-/*
- * Spitz PXA Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_Cxx00
-
-#include <asm/arch/pxafb.h>
-
-void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on)
-		lcdtg_hw_init(var->xres);
-	else
-		lcdtg_suspend();
-}
-
-#endif
-
-
-/*
- * Corgi/Spitz Touchscreen to LCD interface
- */
-static unsigned long (*get_hsync_time)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-#ifdef CONFIG_PXA_SHARP_C7xx
-unsigned long corgi_get_hsync_len(void)
-{
-	if (!get_hsync_time)
-		get_hsync_time = symbol_get(w100fb_get_hsynclen);
-	if (!get_hsync_time)
-		return 0;
-
-	return get_hsync_time(&corgifb_device.dev);
-}
-
-void corgi_put_hsync(void)
-{
-	if (get_hsync_time)
-		symbol_put(w100fb_get_hsynclen);
-	get_hsync_time = NULL;
-}
-
-void corgi_wait_hsync(void)
-{
-	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-#endif
-
-#ifdef CONFIG_PXA_SHARP_Cxx00
-static struct device *spitz_pxafb_dev;
-
-static int is_pxafb_device(struct device * dev, void * data)
-{
-	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
-
-unsigned long spitz_get_hsync_len(void)
-{
-#ifdef CONFIG_FB_PXA
-	if (!spitz_pxafb_dev) {
-		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-		if (!spitz_pxafb_dev)
-			return 0;
-	}
-	if (!get_hsync_time)
-		get_hsync_time = symbol_get(pxafb_get_hsync_time);
-	if (!get_hsync_time)
-#endif
-		return 0;
-
-	return pxafb_get_hsync_time(spitz_pxafb_dev);
-}
-
-void spitz_put_hsync(void)
-{
-	put_device(spitz_pxafb_dev);
-	if (get_hsync_time)
-		symbol_put(pxafb_get_hsync_time);
-	spitz_pxafb_dev = NULL;
-	get_hsync_time = NULL;
-}
-
-void spitz_wait_hsync(void)
-{
-	sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
-}
-#endif
-
-/*
- * Corgi/Spitz Backlight Power
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-void corgi_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-#endif
-
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-void spitz_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-	else
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-	if (intensity)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-void akita_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via IO-Expander */
-	if (intensity & 0x0020)
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-	else
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-	if (intensity)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
-#endif
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 40dea3d5142b..efba65edcd51 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -21,6 +21,7 @@
 
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
new file mode 100644
index 000000000000..cbc583beedc8
--- /dev/null
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -0,0 +1,294 @@
+/*
+ *  linux/arch/arm/mach-pxa/cpu-pxa.c
+ *
+ *  Copyright (C) 2002,2003 Intrinsyc Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * History:
+ *   31-Jul-2002 : Initial version [FB]
+ *   29-Jan-2003 : added PXA255 support [FB]
+ *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
+ *
+ * Note:
+ *   This driver may change the memory bus clock rate, but will not do any
+ *   platform specific access timing changes... for example if you have flash
+ *   memory connected to CS0, you will need to register a platform specific
+ *   notifier which will adjust the memory access strobes to maintain a
+ *   minimum strobe width.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+#ifdef DEBUG
+static unsigned int freq_debug;
+MODULE_PARM(freq_debug, "i");
+MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
+#else
+#define freq_debug  0
+#endif
+
+typedef struct {
+	unsigned int khz;
+	unsigned int membus;
+	unsigned int cccr;
+	unsigned int div2;
+} pxa_freqs_t;
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF          64      /* standard 64ms SDRAM */
+#define SDRAM_ROWS          4096    /* 64MB=8192 32MB=4096 */
+#define MDREFR_DRI(x)       (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
+
+#define CCLKCFG_TURBO       0x1
+#define CCLKCFG_FCS         0x2
+#define PXA25x_MIN_FREQ     99500
+#define PXA25x_MAX_FREQ     398100
+#define MDREFR_DB2_MASK     (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK     0xFFF
+
+
+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+static pxa_freqs_t pxa255_run_freqs[] =
+{
+    /* CPU   MEMBUS  CCCR  DIV2*/
+    { 99500,  99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50,  SDRAM=50 */
+    {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66,  SDRAM=66 */
+    {199100,  99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99,  SDRAM=99 */
+    {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
+    {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
+    {398100,  99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
+    {0,}
+};
+#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+
+static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
+
+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
+static pxa_freqs_t pxa255_turbo_freqs[] =
+{
+    /* CPU   MEMBUS  CCCR  DIV2*/
+    { 99500, 99500,  0x121, 1}, /* run=99,  turbo= 99, PXbus=50, SDRAM=50 */
+    {199100, 99500,  0x221, 0}, /* run=99,  turbo=199, PXbus=50, SDRAM=99 */
+    {298500, 99500,  0x321, 0}, /* run=99,  turbo=287, PXbus=50, SDRAM=99 */
+    {298600, 99500,  0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
+    {398100, 99500,  0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
+    {0,}
+};
+#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+
+extern unsigned get_clk_frequency_khz(int info);
+
+/* find a valid frequency point */
+static int pxa_verify_policy(struct cpufreq_policy *policy)
+{
+	struct cpufreq_frequency_table *pxa_freqs_table;
+	int ret;
+
+	if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+		pxa_freqs_table = pxa255_run_freq_table;
+	} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+		pxa_freqs_table = pxa255_turbo_freq_table;
+	} else {
+		printk("CPU PXA: Unknown policy found. "
+		       "Using CPUFREQ_POLICY_PERFORMANCE\n");
+		pxa_freqs_table = pxa255_run_freq_table;
+	}
+
+	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
+
+	if (freq_debug)
+		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
+		       policy->min, policy->max);
+
+	return ret;
+}
+
+static int pxa_set_target(struct cpufreq_policy *policy,
+			   unsigned int target_freq,
+			   unsigned int relation)
+{
+	struct cpufreq_frequency_table *pxa_freqs_table;
+	pxa_freqs_t *pxa_freq_settings;
+	struct cpufreq_freqs freqs;
+	int idx;
+	unsigned long flags;
+	unsigned int unused, preset_mdrefr, postset_mdrefr;
+	void *ramstart = phys_to_virt(0xa0000000);
+
+	/* Get the current policy */
+	if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+		pxa_freq_settings = pxa255_run_freqs;
+		pxa_freqs_table   = pxa255_run_freq_table;
+	} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+		pxa_freq_settings = pxa255_turbo_freqs;
+		pxa_freqs_table   = pxa255_turbo_freq_table;
+	} else {
+		printk("CPU PXA: Unknown policy found. "
+		       "Using CPUFREQ_POLICY_PERFORMANCE\n");
+		pxa_freq_settings = pxa255_run_freqs;
+		pxa_freqs_table   = pxa255_run_freq_table;
+	}
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
+	                                   target_freq, relation, &idx)) {
+		return -EINVAL;
+	}
+
+	freqs.old = policy->cur;
+	freqs.new = pxa_freq_settings[idx].khz;
+	freqs.cpu = policy->cpu;
+
+	if (freq_debug)
+		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
+		       freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+		       (pxa_freq_settings[idx].membus / 2000) :
+		       (pxa_freq_settings[idx].membus / 1000));
+
+	/*
+	 * Tell everyone what we're about to do...
+	 * you should add a notify client with any platform specific
+	 * Vcc changing capability
+	 */
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
+	 * we need to preset the smaller DRI before the change.  If we're speeding
+	 * up we need to set the larger DRI value after the change.
+	 */
+	preset_mdrefr = postset_mdrefr = MDREFR;
+	if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
+		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
+		                MDREFR_DRI(pxa_freq_settings[idx].membus);
+	}
+	postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
+		            MDREFR_DRI(pxa_freq_settings[idx].membus);
+
+	/* If we're dividing the memory clock by two for the SDRAM clock, this
+	 * must be set prior to the change.  Clearing the divide must be done
+	 * after the change.
+	 */
+	if (pxa_freq_settings[idx].div2) {
+		preset_mdrefr  |= MDREFR_DB2_MASK;
+		postset_mdrefr |= MDREFR_DB2_MASK;
+	} else {
+		postset_mdrefr &= ~MDREFR_DB2_MASK;
+	}
+
+	local_irq_save(flags);
+
+	/* Set new the CCCR */
+	CCCR = pxa_freq_settings[idx].cccr;
+
+	asm volatile("							\n\
+		ldr	r4, [%1]		/* load MDREFR */	\n\
+		b	2f						\n\
+		.align	5 						\n\
+1:									\n\
+		str	%4, [%1]		/* preset the MDREFR */	\n\
+		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
+		str	%5, [%1]		/* postset the MDREFR */ \n\
+									\n\
+		b	3f						\n\
+2:		b	1b						\n\
+3:		nop							\n\
+	  "
+	  : "=&r" (unused)
+	  : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
+	    "r" (preset_mdrefr), "r" (postset_mdrefr)
+	  : "r4", "r5");
+	local_irq_restore(flags);
+
+	/*
+	 * Tell everyone what we've just done...
+	 * you should add a notify client with any platform specific
+	 * SDRAM refresh timer adjustments
+	 */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int i;
+
+	/* set default policy and cpuinfo */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
+	policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+	policy->cur = get_clk_frequency_khz(0);    /* current freq */
+	policy->min = policy->max = policy->cur;
+
+	/* Generate the run cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_RUN_FREQS; i++) {
+		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
+		pxa255_run_freq_table[i].index = i;
+	}
+
+	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
+	/* Generate the turbo cpufreq_frequency_table struct */
+	for (i = 0; i < NUM_TURBO_FREQS; i++) {
+		pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+		pxa255_turbo_freq_table[i].index = i;
+	}
+	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+
+	return 0;
+}
+
+static struct cpufreq_driver pxa_cpufreq_driver = {
+	.verify	= pxa_verify_policy,
+	.target	= pxa_set_target,
+	.init	= pxa_cpufreq_init,
+	.name	= "PXA25x",
+};
+
+static int __init pxa_cpu_init(void)
+{
+	int ret = -ENODEV;
+	if (cpu_is_pxa25x())
+		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
+	return ret;
+}
+
+static void __exit pxa_cpu_exit(void)
+{
+	if (cpu_is_pxa25x())
+		cpufreq_unregister_driver(&pxa_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR ("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_LICENSE("GPL");
+module_init(pxa_cpu_init);
+module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
new file mode 100644
index 000000000000..50ff453ad370
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.c
@@ -0,0 +1,662 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/i2c.h>
+
+#include "devices.h"
+
+void __init pxa_register_device(struct platform_device *dev, void *data)
+{
+	int ret;
+
+	dev->dev.platform_data = data;
+
+	ret = platform_device_register(dev);
+	if (ret)
+		dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+static struct resource pxamci_resources[] = {
+	[0] = {
+		.start	= 0x41100000,
+		.end	= 0x41100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC,
+		.end	= IRQ_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 21,
+		.end	= 21,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 22,
+		.end	= 22,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxamci_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_mci = {
+	.name		= "pxa2xx-mci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxamci_resources),
+	.resource	= pxamci_resources,
+};
+
+void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa_device_mci, info);
+}
+
+
+static struct pxa2xx_udc_mach_info pxa_udc_info;
+
+void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+	memcpy(&pxa_udc_info, info, sizeof *info);
+}
+
+static struct resource pxa2xx_udc_resources[] = {
+	[0] = {
+		.start	= 0x40600000,
+		.end	= 0x4060ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB,
+		.end	= IRQ_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dma_mask = ~(u32)0;
+
+struct platform_device pxa_device_udc = {
+	.name		= "pxa2xx-udc",
+	.id		= -1,
+	.resource	= pxa2xx_udc_resources,
+	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
+	.dev		=  {
+		.platform_data	= &pxa_udc_info,
+		.dma_mask	= &udc_dma_mask,
+	}
+};
+
+static struct resource pxafb_resources[] = {
+	[0] = {
+		.start	= 0x44000000,
+		.end	= 0x4400ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_LCD,
+		.end	= IRQ_LCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 fb_dma_mask = ~(u64)0;
+
+struct platform_device pxa_device_fb = {
+	.name		= "pxa2xx-fb",
+	.id		= -1,
+	.dev		= {
+		.dma_mask	= &fb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxafb_resources),
+	.resource	= pxafb_resources,
+};
+
+void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+{
+	pxa_register_device(&pxa_device_fb, info);
+}
+
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+	pxa_device_fb.dev.parent = parent_dev;
+}
+
+static struct resource pxa_resource_ffuart[] = {
+	{
+		.start	= __PREG(FFUART),
+		.end	= __PREG(FFUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_FFUART,
+		.end	= IRQ_FFUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_ffuart= {
+	.name		= "pxa2xx-uart",
+	.id		= 0,
+	.resource	= pxa_resource_ffuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
+};
+
+static struct resource pxa_resource_btuart[] = {
+	{
+		.start	= __PREG(BTUART),
+		.end	= __PREG(BTUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_BTUART,
+		.end	= IRQ_BTUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_btuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 1,
+	.resource	= pxa_resource_btuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
+};
+
+static struct resource pxa_resource_stuart[] = {
+	{
+		.start	= __PREG(STUART),
+		.end	= __PREG(STUART) + 35,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_STUART,
+		.end	= IRQ_STUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_stuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 2,
+	.resource	= pxa_resource_stuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
+};
+
+static struct resource pxa_resource_hwuart[] = {
+	{
+		.start	= __PREG(HWUART),
+		.end	= __PREG(HWUART) + 47,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_HWUART,
+		.end	= IRQ_HWUART,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device pxa_device_hwuart = {
+	.name		= "pxa2xx-uart",
+	.id		= 3,
+	.resource	= pxa_resource_hwuart,
+	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
+};
+
+static struct resource pxai2c_resources[] = {
+	{
+		.start	= 0x40301680,
+		.end	= 0x403016a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2C,
+		.end	= IRQ_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_i2c = {
+	.name		= "pxa2xx-i2c",
+	.id		= 0,
+	.resource	= pxai2c_resources,
+	.num_resources	= ARRAY_SIZE(pxai2c_resources),
+};
+
+void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
+{
+	pxa_register_device(&pxa_device_i2c, info);
+}
+
+static struct resource pxai2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_i2s = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= pxai2s_resources,
+	.num_resources	= ARRAY_SIZE(pxai2s_resources),
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+struct platform_device pxa_device_ficp = {
+	.name		= "pxa2xx-ir",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxaficp_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+	pxa_register_device(&pxa_device_ficp, info);
+}
+
+struct platform_device pxa_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+};
+
+#ifdef CONFIG_PXA25x
+
+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_ssp[] = {
+	[0] = {
+		.start	= 0x41000000,
+		.end	= 0x4100001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP,
+		.end	= IRQ_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 13,
+		.end	= 13,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 14,
+		.end	= 14,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_ssp = {
+	.name		= "pxa25x-ssp",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxa25x_ssp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_ssp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_ssp),
+};
+
+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_nssp[] = {
+	[0] = {
+		.start	= 0x41400000,
+		.end	= 0x4140002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NSSP,
+		.end	= IRQ_NSSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 15,
+		.end	= 15,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 16,
+		.end	= 16,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_nssp = {
+	.name		= "pxa25x-nssp",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxa25x_nssp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_nssp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_nssp),
+};
+
+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_assp[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_ASSP,
+		.end	= IRQ_ASSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 23,
+		.end	= 23,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 24,
+		.end	= 24,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa25x_device_assp = {
+	/* ASSP is basically equivalent to NSSP */
+	.name		= "pxa25x-nssp",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxa25x_assp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa25x_resource_assp,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_assp),
+};
+#endif /* CONFIG_PXA25x */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ohci[] = {
+	[0] = {
+		.start  = 0x4C000000,
+		.end    = 0x4C00ff6f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_USBH1,
+		.end    = IRQ_USBH1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_ohci = {
+	.name		= "pxa27x-ohci",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa27x_ohci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources  = ARRAY_SIZE(pxa27x_resource_ohci),
+	.resource       = pxa27x_resource_ohci,
+};
+
+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_ohci, info);
+}
+
+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp1[] = {
+	[0] = {
+		.start	= 0x41000000,
+		.end	= 0x4100003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP,
+		.end	= IRQ_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 13,
+		.end	= 13,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 14,
+		.end	= 14,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp1 = {
+	.name		= "pxa27x-ssp",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp2[] = {
+	[0] = {
+		.start	= 0x41700000,
+		.end	= 0x4170003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP2,
+		.end	= IRQ_SSP2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 15,
+		.end	= 15,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 16,
+		.end	= 16,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp2 = {
+	.name		= "pxa27x-ssp",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp2_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp2,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp3[] = {
+	[0] = {
+		.start	= 0x41900000,
+		.end	= 0x4190003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP3,
+		.end	= IRQ_SSP3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 67,
+		.end	= 67,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa27x_device_ssp3 = {
+	.name		= "pxa27x-ssp",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxa27x_ssp3_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa27x_resource_ssp3,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA3xx
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+	[0] = {
+		.start	= 0x41a00000,
+		.end	= 0x41a0003f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP4,
+		.end	= IRQ_SSP4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa3xx_device_ssp4 = {
+	/* PXA3xx SSP is basically equivalent to PXA27x */
+	.name		= "pxa27x-ssp",
+	.id		= 3,
+	.dev		= {
+		.dma_mask = &pxa3xx_ssp4_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource	= pxa3xx_resource_ssp4,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+
+static struct resource pxa3xx_resources_mci2[] = {
+	[0] = {
+		.start	= 0x42000000,
+		.end	= 0x42000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC2,
+		.end	= IRQ_MMC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 93,
+		.end	= 93,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 94,
+		.end	= 94,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa3xx_device_mci2 = {
+	.name		= "pxa2xx-mci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask =	0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
+	.resource	= pxa3xx_resources_mci2,
+};
+
+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_mci2, info);
+}
+
+static struct resource pxa3xx_resources_mci3[] = {
+	[0] = {
+		.start	= 0x42500000,
+		.end	= 0x42500fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MMC3,
+		.end	= IRQ_MMC3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= 100,
+		.end	= 100,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= 101,
+		.end	= 101,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device pxa3xx_device_mci3 = {
+	.name		= "pxa2xx-mci",
+	.id		= 2,
+	.dev		= {
+		.dma_mask = &pxamci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
+	.resource	= pxa3xx_resources_mci3,
+};
+
+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_mci3, info);
+}
+
+#endif /* CONFIG_PXA3xx */
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 94c8d5cdd60a..96c7c8909068 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,6 @@
 extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa3xx_device_mci2;
+extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa_device_udc;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
@@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
+
+extern struct platform_device pxa25x_device_ssp;
+extern struct platform_device pxa25x_device_nssp;
+extern struct platform_device pxa25x_device_assp;
+extern struct platform_device pxa27x_device_ssp1;
+extern struct platform_device pxa27x_device_ssp2;
+extern struct platform_device pxa27x_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp4;
+
+void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
new file mode 100644
index 000000000000..ee0ae93c876a
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.c
@@ -0,0 +1,101 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach-types.h>
+
+#include <generic.h>
+
+/* Only e800 has 128MB RAM */
+static void __init eseries_fixup(struct machine_desc *desc,
+                      struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks=1;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	if (machine_is_e800())
+		mi->bank[0].size = (128*1024*1024);
+	else
+		mi->bank[0].size = (64*1024*1024);
+}
+
+/* e-series machine definitions */
+
+#ifdef CONFIG_MACH_E330
+MACHINE_START(E330, "Toshiba e330")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+MACHINE_START(E740, "Toshiba e740")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+MACHINE_START(E750, "Toshiba e750")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+MACHINE_START(E400, "Toshiba e400")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+MACHINE_START(E800, "Toshiba e800")
+        /* Maintainer: Ian Molton (spyro@f2s.com) */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa25x_init_irq,
+        .fixup          = eseries_fixup,
+        .timer = &pxa_timer,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1c34946ee16e..698aeec52961 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
 #include <linux/string.h>
@@ -33,13 +32,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
 
-#include "devices.h"
 #include "generic.h"
 
 /*
@@ -203,7 +196,7 @@ static struct map_desc standard_io_desc[] __initdata = {
 	}, {	/* Mem Ctl */
 		.virtual	=  0xf6000000,
 		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00100000,
+		.length		= 0x00200000,
 		.type		= MT_DEVICE
 	}, {	/* USB host */
 		.virtual	=  0xf8000000,
@@ -233,245 +226,3 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
-
-
-static struct resource pxamci_resources[] = {
-	[0] = {
-		.start	= 0x41100000,
-		.end	= 0x41100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC,
-		.end	= IRQ_MMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
-	.name		= "pxa2xx-mci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxamci_resources),
-	.resource	= pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
-{
-	pxa_device_mci.dev.platform_data = info;
-}
-
-
-static struct pxa2xx_udc_mach_info pxa_udc_info;
-
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
-static struct resource pxa2xx_udc_resources[] = {
-	[0] = {
-		.start	= 0x40600000,
-		.end	= 0x4060ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB,
-		.end	= IRQ_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dma_mask = ~(u32)0;
-
-struct platform_device pxa_device_udc = {
-	.name		= "pxa2xx-udc",
-	.id		= -1,
-	.resource	= pxa2xx_udc_resources,
-	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
-	.dev		=  {
-		.platform_data	= &pxa_udc_info,
-		.dma_mask	= &udc_dma_mask,
-	}
-};
-
-static struct resource pxafb_resources[] = {
-	[0] = {
-		.start	= 0x44000000,
-		.end	= 0x4400ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_LCD,
-		.end	= IRQ_LCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-struct platform_device pxa_device_fb = {
-	.name		= "pxa2xx-fb",
-	.id		= -1,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxafb_resources),
-	.resource	= pxafb_resources,
-};
-
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
-{
-	pxa_device_fb.dev.platform_data = info;
-}
-
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
-	pxa_device_fb.dev.parent = parent_dev;
-}
-
-static struct resource pxa_resource_ffuart[] = {
-	{
-		.start	= __PREG(FFUART),
-		.end	= __PREG(FFUART) + 35,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_FFUART,
-		.end	= IRQ_FFUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_ffuart= {
-	.name		= "pxa2xx-uart",
-	.id		= 0,
-	.resource	= pxa_resource_ffuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
-};
-
-static struct resource pxa_resource_btuart[] = {
-	{
-		.start	= __PREG(BTUART),
-		.end	= __PREG(BTUART) + 35,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_BTUART,
-		.end	= IRQ_BTUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_btuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 1,
-	.resource	= pxa_resource_btuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
-};
-
-static struct resource pxa_resource_stuart[] = {
-	{
-		.start	= __PREG(STUART),
-		.end	= __PREG(STUART) + 35,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_STUART,
-		.end	= IRQ_STUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_stuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 2,
-	.resource	= pxa_resource_stuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
-};
-
-static struct resource pxa_resource_hwuart[] = {
-	{
-		.start	= __PREG(HWUART),
-		.end	= __PREG(HWUART) + 47,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_HWUART,
-		.end	= IRQ_HWUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_hwuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 3,
-	.resource	= pxa_resource_hwuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
-};
-
-static struct resource pxai2c_resources[] = {
-	{
-		.start	= 0x40301680,
-		.end	= 0x403016a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2C,
-		.end	= IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2c = {
-	.name		= "pxa2xx-i2c",
-	.id		= 0,
-	.resource	= pxai2c_resources,
-	.num_resources	= ARRAY_SIZE(pxai2c_resources),
-};
-
-void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_device_i2c.dev.platform_data = info;
-}
-
-static struct resource pxai2s_resources[] = {
-	{
-		.start	= 0x40400000,
-		.end	= 0x40400083,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2S,
-		.end	= IRQ_I2S,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2s = {
-	.name		= "pxa2xx-i2s",
-	.id		= -1,
-	.resource	= pxai2s_resources,
-	.num_resources	= ARRAY_SIZE(pxai2s_resources),
-};
-
-static u64 pxaficp_dmamask = ~(u32)0;
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_device_ficp.dev.platform_data = info;
-}
-
-struct platform_device pxa_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-};
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 465108da2851..0a9434432c55 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -54,7 +54,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(4),
 		.end	= IRQ_GPIO(4),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
new file mode 100644
index 000000000000..0a4b54c21314
--- /dev/null
+++ b/arch/arm/mach-pxa/littleton.c
@@ -0,0 +1,325 @@
+/*
+ *  linux/arch/arm/mach-pxa/littleton.c
+ *
+ *  Support for the Marvell Littleton Development Platform.
+ *
+ *  Author:	Jason Chagas (largely modified code)
+ *  Created:	Nov 20, 2006
+ *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
+ *
+ *  2007-11-22  modified to align with latest kernel
+ *              eric miao <eric.miao@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ssp.h>
+#include <asm/arch/littleton.h>
+
+#include "generic.h"
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+/* Littleton MFP configurations */
+static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* SSP2 */
+	GPIO25_SSP2_SCLK,
+	GPIO17_SSP2_FRM,
+	GPIO27_SSP2_TXD,
+
+	/* Debug Ethernet */
+	GPIO90_GPIO,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (LITTLETON_ETH_PHYS + 0x300),
+		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+/* use bit 30, 31 as the indicator of command parameter number */
+#define CMD0(x)		((0x00000000) | ((x) << 9))
+#define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
+#define CMD2(x, x1, x2)	((0x80000000) | ((x) << 18) | 0x20000 |\
+			 ((x1) << 9) | 0x100 | (x2))
+
+static uint32_t lcd_panel_reset[] = {
+	CMD0(0x1), /* reset */
+	CMD0(0x0), /* nop */
+	CMD0(0x0), /* nop */
+	CMD0(0x0), /* nop */
+};
+
+static uint32_t lcd_panel_on[] = {
+	CMD0(0x29),		/* Display ON */
+	CMD2(0xB8, 0xFF, 0xF9),	/* Output Control */
+	CMD0(0x11),		/* Sleep out */
+	CMD1(0xB0, 0x16),	/* Wake */
+};
+
+static uint32_t lcd_panel_off[] = {
+	CMD0(0x28),		/* Display OFF */
+	CMD2(0xB8, 0x80, 0x02),	/* Output Control */
+	CMD0(0x10),		/* Sleep in */
+	CMD1(0xB0, 0x00),	/* Deep stand by in */
+};
+
+static uint32_t lcd_vga_pass_through[] = {
+	CMD1(0xB0, 0x16),
+	CMD1(0xBC, 0x80),
+	CMD1(0xE1, 0x00),
+	CMD1(0x36, 0x50),
+	CMD1(0x3B, 0x00),
+};
+
+static uint32_t lcd_qvga_pass_through[] = {
+	CMD1(0xB0, 0x16),
+	CMD1(0xBC, 0x81),
+	CMD1(0xE1, 0x00),
+	CMD1(0x36, 0x50),
+	CMD1(0x3B, 0x22),
+};
+
+static uint32_t lcd_vga_transfer[] = {
+	CMD1(0xcf, 0x02), 	/* Blanking period control (1) */
+	CMD2(0xd0, 0x08, 0x04),	/* Blanking period control (2) */
+	CMD1(0xd1, 0x01),	/* CKV timing control on/off */
+	CMD2(0xd2, 0x14, 0x00),	/* CKV 1,2 timing control */
+	CMD2(0xd3, 0x1a, 0x0f),	/* OEV timing control */
+	CMD2(0xd4, 0x1f, 0xaf),	/* ASW timing control (1) */
+	CMD1(0xd5, 0x14),	/* ASW timing control (2) */
+	CMD0(0x21),		/* Invert for normally black display */
+	CMD0(0x29),		/* Display on */
+};
+
+static uint32_t lcd_qvga_transfer[] = {
+	CMD1(0xd6, 0x02),	/* Blanking period control (1) */
+	CMD2(0xd7, 0x08, 0x04),	/* Blanking period control (2) */
+	CMD1(0xd8, 0x01),	/* CKV timing control on/off */
+	CMD2(0xd9, 0x00, 0x08),	/* CKV 1,2 timing control */
+	CMD2(0xde, 0x05, 0x0a),	/* OEV timing control */
+	CMD2(0xdf, 0x0a, 0x19),	/* ASW timing control (1) */
+	CMD1(0xe0, 0x0a),	/* ASW timing control (2) */
+	CMD0(0x21),		/* Invert for normally black display */
+	CMD0(0x29),		/* Display on */
+};
+
+static uint32_t lcd_panel_config[] = {
+	CMD2(0xb8, 0xff, 0xf9),	/* Output control */
+	CMD0(0x11),		/* sleep out */
+	CMD1(0xba, 0x01),	/* Display mode (1) */
+	CMD1(0xbb, 0x00),	/* Display mode (2) */
+	CMD1(0x3a, 0x60),	/* Display mode 18-bit RGB */
+	CMD1(0xbf, 0x10),	/* Drive system change control */
+	CMD1(0xb1, 0x56),	/* Booster operation setup */
+	CMD1(0xb2, 0x33),	/* Booster mode setup */
+	CMD1(0xb3, 0x11),	/* Booster frequency setup */
+	CMD1(0xb4, 0x02),	/* Op amp/system clock */
+	CMD1(0xb5, 0x35),	/* VCS voltage */
+	CMD1(0xb6, 0x40),	/* VCOM voltage */
+	CMD1(0xb7, 0x03),	/* External display signal */
+	CMD1(0xbd, 0x00),	/* ASW slew rate */
+	CMD1(0xbe, 0x00),	/* Dummy data for QuadData operation */
+	CMD1(0xc0, 0x11),	/* Sleep out FR count (A) */
+	CMD1(0xc1, 0x11),	/* Sleep out FR count (B) */
+	CMD1(0xc2, 0x11),	/* Sleep out FR count (C) */
+	CMD2(0xc3, 0x20, 0x40),	/* Sleep out FR count (D) */
+	CMD2(0xc4, 0x60, 0xc0),	/* Sleep out FR count (E) */
+	CMD2(0xc5, 0x10, 0x20),	/* Sleep out FR count (F) */
+	CMD1(0xc6, 0xc0),	/* Sleep out FR count (G) */
+	CMD2(0xc7, 0x33, 0x43),	/* Gamma 1 fine tuning (1) */
+	CMD1(0xc8, 0x44),	/* Gamma 1 fine tuning (2) */
+	CMD1(0xc9, 0x33),	/* Gamma 1 inclination adjustment */
+	CMD1(0xca, 0x00),	/* Gamma 1 blue offset adjustment */
+	CMD2(0xec, 0x01, 0xf0),	/* Horizontal clock cycles */
+};
+
+static void ssp_reconfig(struct ssp_dev *dev, int nparam)
+{
+	static int last_nparam = -1;
+
+	/* check if it is necessary to re-config SSP */
+	if (nparam == last_nparam)
+		return;
+
+	ssp_disable(dev);
+	ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
+
+	last_nparam = nparam;
+}
+
+static void ssp_send_cmd(uint32_t *cmd, int num)
+{
+	static int ssp_initialized;
+	static struct ssp_dev ssp2;
+
+	int i;
+
+	if (!ssp_initialized) {
+		ssp_init(&ssp2, 2, SSP_NO_IRQ);
+		ssp_initialized = 1;
+	}
+
+	clk_enable(ssp2.ssp->clk);
+	for (i = 0; i < num; i++, cmd++) {
+		ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
+		ssp_write_word(&ssp2, *cmd & 0x3fffffff);
+
+		/* FIXME: ssp_flush() is mandatory here to work */
+		ssp_flush(&ssp2);
+	}
+	clk_disable(ssp2.ssp->clk);
+}
+
+static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	if (on) {
+		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
+		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
+		if (var->xres > 240) {
+			/* VGA */
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
+		} else {
+			/* QVGA */
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
+		}
+	} else
+		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
+}
+
+static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
+	[0] = {
+		/* VGA */
+		.pixclock	= 38250,
+		.xres		= 480,
+		.yres		= 640,
+		.bpp		= 16,
+		.hsync_len	= 8,
+		.left_margin	= 8,
+		.right_margin	= 24,
+		.vsync_len	= 2,
+		.upper_margin	= 2,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		/* QVGA */
+		.pixclock	= 153000,
+		.xres		= 240,
+		.yres		= 320,
+		.bpp		= 16,
+		.hsync_len	= 8,
+		.left_margin	= 8,
+		.right_margin	= 88,
+		.vsync_len	= 2,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info littleton_lcd_info = {
+	.modes			= tpo_tdo24mtea1_modes,
+	.num_modes		= 2,
+	.lccr0			= LCCR0_Act,
+	.lccr3			= LCCR3_HSP | LCCR3_VSP,
+	.pxafb_lcd_power	= littleton_lcd_power,
+};
+
+static void littleton_init_lcd(void)
+{
+	set_pxa_fb_info(&littleton_lcd_info);
+}
+#else
+static inline void littleton_init_lcd(void) {};
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+
+static void __init littleton_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+
+	/*
+	 * Note: we depend bootloader set the correct
+	 * value to MSC register for SMC91x.
+	 */
+	platform_device_register(&smc91x_device);
+
+	littleton_init_lcd();
+}
+
+MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= littleton_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 78ebad063cba..afa62ffe3ad5 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,6 +38,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/lpd270.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1d3112dc629e..e7ae4bb3e361 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,6 +41,7 @@
 #include <asm/hardware/sa1111.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
@@ -136,9 +137,13 @@ static struct sys_device lubbock_irq_device = {
 
 static int __init lubbock_irq_device_init(void)
 {
-	int ret = sysdev_class_register(&lubbock_irq_sysclass);
-	if (ret == 0)
-		ret = sysdev_register(&lubbock_irq_device);
+	int ret = -ENODEV;
+
+	if (machine_is_lubbock()) {
+		ret = sysdev_class_register(&lubbock_irq_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&lubbock_irq_device);
+	}
 	return ret;
 }
 
@@ -191,7 +196,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= LUBBOCK_ETH_IRQ,
 		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 	[2] = {
 		.name	= "smc91x-attrib",
@@ -206,30 +211,13 @@ static struct resource smc91x_resources[] = {
  * (to J5) and poking board registers (as done below).  Else it's only useful
  * for the temperature sensors.
  */
-static struct resource pxa_ssp_resources[] = {
-	[0] = {
-		.start	= __PREG(SSCR0_P(1)),
-		.end	= __PREG(SSCR0_P(1)) + 0x14,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.ssp_type	= PXA25x_SSP,
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 0,
 };
 
 static struct platform_device pxa_ssp = {
 	.name		= "pxa2xx-spi",
 	.id		= 1,
-	.resource	= pxa_ssp_resources,
-	.num_resources	= ARRAY_SIZE(pxa_ssp_resources),
 	.dev = {
 		.platform_data	= &pxa_ssp_master_info,
 	},
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
new file mode 100644
index 000000000000..d98ef7ada2f8
--- /dev/null
+++ b/arch/arm/mach-pxa/magician.c
@@ -0,0 +1,218 @@
+/*
+ * Support for HTC Magician PDA phones:
+ * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
+ * and T-Mobile MDA Compact.
+ *
+ * Copyright (c) 2006-2007 Philipp Zabel
+ *
+ * Based on hx4700.c, spitz.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/gpio.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/magician.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/*
+ * IRDA
+ */
+
+static void magician_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data magician_ficp_info = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = magician_irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+static struct gpio_keys_button magician_button_table[] = {
+	{KEY_POWER,      GPIO0_MAGICIAN_KEY_POWER,      0, "Power button"},
+	{KEY_ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    0, "Hangup button"},
+	{KEY_F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  0, "Contacts button"},
+	{KEY_CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  0, "Calendar button"},
+	{KEY_CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    0, "Camera button"},
+	{KEY_UP,         GPIO93_MAGICIAN_KEY_UP,        0, "Up button"},
+	{KEY_DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      0, "Down button"},
+	{KEY_LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      0, "Left button"},
+	{KEY_RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     0, "Right button"},
+	{KEY_KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     0, "Action button"},
+	{KEY_RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    0, "Record button"},
+	{KEY_VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   0, "Volume up"},
+	{KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
+	{KEY_PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    0, "Phone button"},
+	{KEY_PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  0, "Headset button"},
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+	.buttons  = magician_button_table,
+	.nbuttons = ARRAY_SIZE(magician_button_table),
+};
+
+static struct platform_device gpio_keys = {
+	.name = "gpio-keys",
+	.dev  = {
+		.platform_data = &gpio_keys_data,
+	},
+	.id   = -1,
+};
+
+/*
+ * LCD - Toppoly TD028STEB1
+ */
+
+static struct pxafb_mode_info toppoly_modes[] = {
+	{
+		.pixclock     = 96153,
+		.bpp          = 16,
+		.xres         = 240,
+		.yres         = 320,
+		.hsync_len    = 11,
+		.vsync_len    = 3,
+		.left_margin  = 19,
+		.upper_margin = 2,
+		.right_margin = 10,
+		.lower_margin = 2,
+		.sync         = 0,
+	},
+};
+
+static struct pxafb_mach_info toppoly_info = {
+	.modes       = toppoly_modes,
+	.num_modes   = 1,
+	.fixed_modes = 1,
+	.lccr0       = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3       = LCCR3_PixRsEdg,
+};
+
+/*
+ * Backlight
+ */
+
+static void magician_set_bl_intensity(int intensity)
+{
+	if (intensity) {
+		PWM_CTRL0 = 1;
+		PWM_PERVAL0 = 0xc8;
+		PWM_PWDUTY0 = intensity;
+		pxa_set_cken(CKEN_PWM0, 1);
+	} else {
+		pxa_set_cken(CKEN_PWM0, 0);
+	}
+}
+
+static struct generic_bl_info backlight_info = {
+	.default_intensity = 0x64,
+	.limit_mask        = 0x0b,
+	.max_intensity     = 0xc7,
+	.set_bl_intensity  = magician_set_bl_intensity,
+};
+
+static struct platform_device backlight = {
+	.name = "corgi-bl",
+	.dev  = {
+		.platform_data = &backlight_info,
+	},
+	.id   = -1,
+};
+
+
+/*
+ * USB OHCI
+ */
+
+static int magician_ohci_init(struct device *dev)
+{
+	UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
+	    ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
+
+	return 0;
+}
+
+static struct pxaohci_platform_data magician_ohci_info = {
+	.port_mode    = PMM_PERPORT_MODE,
+	.init         = magician_ohci_init,
+	.power_budget = 0,
+};
+
+
+/*
+ * StrataFlash
+ */
+
+#define PXA_CS_SIZE		0x04000000
+
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 4,
+};
+
+static struct platform_device strataflash = {
+	.name          = "physmap-flash",
+	.id            = -1,
+	.num_resources = 1,
+	.resource      = &strataflash_resource,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&gpio_keys,
+	&backlight,
+	&strataflash,
+};
+
+static void __init magician_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_ohci_info(&magician_ohci_info);
+	pxa_set_ficp_info(&magician_ficp_info);
+	set_pxa_fb_info(&toppoly_info);
+}
+
+
+MACHINE_START(MAGICIAN, "HTC Magician")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params = 0xa0000100,
+	.map_io = pxa_map_io,
+	.init_irq = pxa27x_init_irq,
+	.init_machine = magician_init,
+	.timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 41d8c6cea62b..345c3deeb02e 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/backlight.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mainstone.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
@@ -130,9 +132,13 @@ static struct sys_device mainstone_irq_device = {
 
 static int __init mainstone_irq_device_init(void)
 {
-	int ret = sysdev_class_register(&mainstone_irq_sysclass);
-	if (ret == 0)
-		ret = sysdev_register(&mainstone_irq_device);
+	int ret = -ENODEV;
+
+	if (machine_is_mainstone()) {
+		ret = sysdev_class_register(&mainstone_irq_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&mainstone_irq_device);
+	}
 	return ret;
 }
 
@@ -150,7 +156,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= MAINSTONE_IRQ(3),
 		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
@@ -263,21 +269,60 @@ static struct platform_device mst_flash_device[2] = {
 	},
 };
 
-static void mainstone_backlight_power(int on)
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+static int mainstone_backlight_update_status(struct backlight_device *bl)
 {
-	if (on) {
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (brightness != 0) {
 		pxa_gpio_mode(GPIO16_PWM0_MD);
 		pxa_set_cken(CKEN_PWM0, 1);
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x3ff;
-		PWM_PERVAL0 = 0x3ff;
-	} else {
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x0;
-		PWM_PERVAL0 = 0x3FF;
+	}
+	PWM_CTRL0 = 0;
+	PWM_PWDUTY0 = brightness;
+	PWM_PERVAL0 = bl->props.max_brightness;
+	if (brightness == 0)
 		pxa_set_cken(CKEN_PWM0, 0);
+	return 0; /* pointless return value */
+}
+
+static int mainstone_backlight_get_brightness(struct backlight_device *bl)
+{
+	return PWM_PWDUTY0;
+}
+
+static /*const*/ struct backlight_ops mainstone_backlight_ops = {
+	.update_status	= mainstone_backlight_update_status,
+	.get_brightness	= mainstone_backlight_get_brightness,
+};
+
+static void __init mainstone_backlight_register(void)
+{
+	struct backlight_device *bl;
+
+	bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
+				       NULL, &mainstone_backlight_ops);
+	if (IS_ERR(bl)) {
+		printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
+		       PTR_ERR(bl));
+		return;
 	}
+
+	/*
+	 * broken design - register-then-setup interfaces are
+	 * utterly broken by definition.
+	 */
+	bl->props.max_brightness = 1023;
+	bl->props.brightness = 1023;
+	backlight_update_status(bl);
 }
+#else
+#define mainstone_backlight_register()	do { } while (0)
+#endif
 
 static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 	.pixclock		= 50000,
@@ -311,7 +356,6 @@ static struct pxafb_mach_info mainstone_pxafb_info = {
 	.num_modes      	= 1,
 	.lccr0			= LCCR0_Act,
 	.lccr3			= LCCR3_PCP,
-	.pxafb_backlight_power	= mainstone_backlight_power,
 };
 
 static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
@@ -335,12 +379,10 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
 
 	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
 
-	return 0;
+	return err;
 }
 
 static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
@@ -473,6 +515,7 @@ static void __init mainstone_init(void)
 		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
 
 	set_pxa_fb_info(&mainstone_pxafb_info);
+	mainstone_backlight_register();
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
 	pxa_set_ficp_info(&mainstone_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 436f96574964..ec1b2d8f61c4 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -17,9 +17,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -28,43 +30,110 @@
 static DEFINE_SPINLOCK(mfp_spin_lock);
 
 static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+
+struct pxa3xx_mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
 static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
 
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+const static unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+const static unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+const static unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
 #define mfpr_readl(off)			\
 	__raw_readl(mfpr_mmio_base + (off))
 
 #define mfpr_writel(off, val)		\
 	__raw_writel(val, mfpr_mmio_base + (off))
 
+#define mfp_configured(p)	((p)->config != -1)
+
 /*
  * perform a read-back of any MFPR register to make sure the
  * previous writings are finished
  */
 #define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
 
-static inline void __mfp_config(int pin, unsigned long val)
+static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
 {
-	unsigned long off = mfp_table[pin].mfpr_off;
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
 
-	mfp_table[pin].mfpr_val = val;
-	mfpr_writel(off, val);
+static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
 }
 
-void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
-	int i, pin;
-	unsigned long val, flags;
-	mfp_cfg_t *mfp_cfg = mfp_cfgs;
+	unsigned long flags;
+	int i;
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 
-	for (i = 0; i < num; i++, mfp_cfg++) {
-		pin = MFP_CFG_PIN(*mfp_cfg);
-		val = MFP_CFG_VAL(*mfp_cfg);
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct pxa3xx_mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
 
+		pin = MFP_PIN(c);
 		BUG_ON(pin >= MFP_PIN_MAX);
-
-		__mfp_config(pin, val);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
 	}
 
 	mfpr_sync();
@@ -96,140 +165,82 @@ void pxa3xx_mfp_write(int mfp, unsigned long val)
 	spin_unlock_irqrestore(&mfp_spin_lock, flags);
 }
 
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_off = mfp_table[mfp].mfpr_off;
-
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
-	mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
-		     ((ds & 0x7) << MFPR_DRV_OFFSET));
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_rdh(int mfp, int rdh)
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
 {
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	struct pxa3xx_mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 
-	mfpr_off = mfp_table[mfp].mfpr_off;
-
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_RDH_MASK;
-
-	if (likely(rdh))
-		mfpr_val |= (1u << MFPR_SS_OFFSET);
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
 
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
 
 	spin_unlock_irqrestore(&mfp_spin_lock, flags);
 }
 
-void pxa3xx_mfp_set_lpm(int mfp, int lpm)
+void __init pxa3xx_init_mfp(void)
 {
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_LPM_MASK;
-
-	if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
-	if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
-	if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
-	if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
-	if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
+	int i;
 
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
 }
 
-void pxa3xx_mfp_set_pull(int mfp, int pull)
+#ifdef CONFIG_PM
+/*
+ * Configure the MFPs appropriately for suspend/resume.
+ * FIXME: this should probably depend on which system state we're
+ * entering - for instance, we might not want to place MFP pins in
+ * a pull-down mode if they're an active low chip select, and we're
+ * just entering standby.
+ */
+static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
+	int pin;
 
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_PULL_MASK;
-	mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+		__mfp_config_lpm(p);
+	}
+	return 0;
 }
 
-void pxa3xx_mfp_set_edge(int mfp, int edge)
+static int pxa3xx_mfp_resume(struct sys_device *d)
 {
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-
-	mfpr_val &= ~MFPR_EDGE_MASK;
-	mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
-	mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
+	int pin;
 
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+		__mfp_config_run(p);
+	}
+	return 0;
 }
 
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
-	struct pxa3xx_mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_val = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
+static struct sysdev_class mfp_sysclass = {
+	set_kset_name("mfp"),
+	.suspend	= pxa3xx_mfp_suspend,
+	.resume 	= pxa3xx_mfp_resume,
+};
 
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
+static struct sys_device mfp_device = {
+	.id		= 0,
+	.cls		= &mfp_sysclass,
+};
 
-void __init pxa3xx_init_mfp(void)
+static int __init mfp_init_devicefs(void)
 {
-	memset(mfp_table, 0, sizeof(mfp_table));
+	sysdev_class_register(&mfp_sysclass);
+	return sysdev_register(&mfp_device);
 }
+device_initcall(mfp_init_devicefs);
+#endif
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
new file mode 100644
index 000000000000..540c3bba5f9a
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -0,0 +1,216 @@
+/*
+ *  linux/arch/arm/mach-pxa/pcm027.c
+ *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
+ *
+ *  Refer
+ *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
+ *  for additional hardware info
+ *
+ *  Author:	Juergen Kilb
+ *  Created:	April 05, 2005
+ *  Copyright:	Phytec Messtechnik GmbH
+ *  e-Mail:	armlinux@phytec.de
+ *
+ *  based on Intel Mainstone Board
+ *
+ *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+#include <asm/arch/pcm027.h>
+#include "generic.h"
+
+/*
+ * ABSTRACT:
+ *
+ * The PXA270 processor comes with a bunch of hardware on its silicon.
+ * Not all of this hardware can be used at the same time and not all
+ * is routed to module's connectors. Also it depends on the baseboard, what
+ * kind of hardware can be used in which way.
+ * -> So this file supports the main devices on the CPU card only!
+ * Refer pcm990-baseboard.c how to extend this features to get a full
+ * blown system with many common interfaces.
+ *
+ * The PCM-027 supports the following interfaces through its connectors and
+ * will be used in pcm990-baseboard.c:
+ *
+ * - LCD support
+ * - MMC support
+ * - IDE/CF card
+ * - FFUART
+ * - BTUART
+ * - IRUART
+ * - AC97
+ * - SSP
+ * - SSP3
+ *
+ * Claimed GPIOs:
+ * GPIO0 -> IRQ input from RTC
+ * GPIO2 -> SYS_ENA*)
+ * GPIO3 -> PWR_SCL
+ * GPIO4 -> PWR_SDA
+ * GPIO5 -> PowerCap0*)
+ * GPIO6 -> PowerCap1*)
+ * GPIO7 -> PowerCap2*)
+ * GPIO8 -> PowerCap3*)
+ * GPIO15 -> /CS1
+ * GPIO20 -> /CS2
+ * GPIO21 -> /CS3
+ * GPIO33 -> /CS5 network controller select
+ * GPIO52 -> IRQ from network controller
+ * GPIO78 -> /CS2
+ * GPIO80 -> /CS4
+ * GPIO90 -> LED0
+ * GPIO91 -> LED1
+ * GPIO114 -> IRQ from CAN controller
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ *
+ * *) CPU internal use only
+ */
+
+/*
+ * SMC91x network controller specific stuff
+ */
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= PCM027_ETH_PHYS + 0x300,
+		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PCM027_ETH_IRQ,
+		.end	= PCM027_ETH_IRQ,
+		/* note: smc91x's driver doesn't use the trigger bits yet */
+		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct physmap_flash_data pcm027_flash_data = {
+	.width  = 4,
+};
+
+static struct resource pcm027_flash_resource = {
+	.start          = PCM027_FLASH_PHYS,
+	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm027_flash = {
+	.name           = "physmap-flash",
+	.id             = 0,
+	.dev            = {
+		.platform_data  = &pcm027_flash_data,
+	},
+	.resource       = &pcm027_flash_resource,
+	.num_resources  = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+
+static struct gpio_led pcm027_led[] = {
+	{
+		.name = "led0:red",	/* FIXME */
+		.gpio = PCM027_LED_CPU
+	},
+	{
+		.name = "led1:green",	/* FIXME */
+		.gpio = PCM027_LED_HEARD_BEAT
+	},
+};
+
+static struct gpio_led_platform_data pcm027_led_data = {
+	.num_leds	= ARRAY_SIZE(pcm027_led),
+	.leds		= pcm027_led
+};
+
+static struct platform_device pcm027_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &pcm027_led_data,
+	},
+};
+
+#endif /* CONFIG_LEDS_GPIO */
+
+/*
+ * declare the available device resources on this board
+ */
+static struct platform_device *devices[] __initdata = {
+	&smc91x_device,
+	&pcm027_flash,
+#ifdef CONFIG_LEDS_GPIO
+	&pcm027_led_dev
+#endif
+};
+
+/*
+ * pcm027_init - breath some life into the board
+ */
+static void __init pcm027_init(void)
+{
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* LEDs (on demand only) */
+#ifdef CONFIG_LEDS_GPIO
+	pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
+	pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
+#endif /* CONFIG_LEDS_GPIO */
+
+	/* at last call the baseboard to initialize itself */
+#ifdef CONFIG_MACH_PCM990_BASEBOARD
+	pcm990_baseboard_init();
+#endif
+}
+
+static void __init pcm027_map_io(void)
+{
+	pxa_map_io();
+
+	/* initialize sleep mode regs (wake-up sources, etc) */
+	PGSR0 = 0x01308000;
+	PGSR1 = 0x00CF0002;
+	PGSR2 = 0x0E294000;
+	PGSR3 = 0x0000C000;
+	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
+	PRER  = 0x00000000;
+	PFER  = 0x00000003;
+}
+
+MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
+	/* Maintainer: Pengutronix */
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pcm027_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= pcm027_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
new file mode 100644
index 000000000000..3dda16a20049
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -0,0 +1,330 @@
+/*
+ *  arch/arm/mach-pxa/pcm990-baseboard.c
+ *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
+ *
+ *  Refer
+ *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
+ *  for additional hardware info
+ *
+ *  Author:	Juergen Kilb
+ *  Created:	April 05, 2005
+ *  Copyright:	Phytec Messtechnik GmbH
+ *  e-Mail:	armlinux@phytec.de
+ *
+ *  based on Intel Mainstone Board
+ *
+ *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ide.h>
+#include <asm/mach/map.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pcm990_baseboard.h>
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * following way:
+ *
+ * - LCD support is in use
+ *  - GPIO16 is output for back light on/off with PWM
+ *  - GPIO58 ... GPIO73 are outputs for display data
+ *  - GPIO74 is output output for LCDFCLK
+ *  - GPIO75 is output for LCDLCLK
+ *  - GPIO76 is output for LCDPCLK
+ *  - GPIO77 is output for LCDBIAS
+ * - MMC support is in use
+ *  - GPIO32 is output for MMCCLK
+ *  - GPIO92 is MMDAT0
+ *  - GPIO109 is MMDAT1
+ *  - GPIO110 is MMCS0
+ *  - GPIO111 is MMCS1
+ *  - GPIO112 is MMCMD
+ * - IDE/CF card is in use
+ *  - GPIO48 is output /POE
+ *  - GPIO49 is output /PWE
+ *  - GPIO50 is output /PIOR
+ *  - GPIO51 is output /PIOW
+ *  - GPIO54 is output /PCE2
+ *  - GPIO55 is output /PREG
+ *  - GPIO56 is input /PWAIT
+ *  - GPIO57 is output /PIOS16
+ *  - GPIO79 is output PSKTSEL
+ *  - GPIO85 is output /PCE1
+ * - FFUART is in use
+ *  - GPIO34 is input FFRXD
+ *  - GPIO35 is input FFCTS
+ *  - GPIO36 is input FFDCD
+ *  - GPIO37 is input FFDSR
+ *  - GPIO38 is input FFRI
+ *  - GPIO39 is output FFTXD
+ *  - GPIO40 is output FFDTR
+ *  - GPIO41 is output FFRTS
+ * - BTUART is in use
+ *  - GPIO42 is input BTRXD
+ *  - GPIO43 is output BTTXD
+ *  - GPIO44 is input BTCTS
+ *  - GPIO45 is output BTRTS
+ * - IRUART is in use
+ *  - GPIO46 is input STDRXD
+ *  - GPIO47 is output STDTXD
+ * - AC97 is in use*)
+ *  - GPIO28 is input AC97CLK
+ *  - GPIO29 is input AC97DatIn
+ *  - GPIO30 is output AC97DatO
+ *  - GPIO31 is output AC97SYNC
+ *  - GPIO113 is output AC97_RESET
+ * - SSP is in use
+ *  - GPIO23 is output SSPSCLK
+ *  - GPIO24 is output chip select to Max7301
+ *  - GPIO25 is output SSPTXD
+ *  - GPIO26 is input SSPRXD
+ *  - GPIO27 is input for Max7301 IRQ
+ *  - GPIO53 is input SSPSYSCLK
+ * - SSP3 is in use
+ *  - GPIO81 is output SSPTXD3
+ *  - GPIO82 is input SSPRXD3
+ *  - GPIO83 is output SSPSFRM
+ *  - GPIO84 is output SSPCLK3
+ *
+ * Otherwise claimed GPIOs:
+ * GPIO1 -> IRQ from user switch
+ * GPIO9 -> IRQ from power management
+ * GPIO10 -> IRQ from WML9712 AC97 controller
+ * GPIO11 -> IRQ from IDE controller
+ * GPIO12 -> IRQ from CF controller
+ * GPIO13 -> IRQ from CF controller
+ * GPIO14 -> GPIO free
+ * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
+ * GPIO19 -> GPIO free
+ * GPIO20 -> /SDCS2
+ * GPIO21 -> /CS3 PC card socket select
+ * GPIO33 -> /CS5  network controller select
+ * GPIO78 -> /CS2  (16 bit wide data path)
+ * GPIO80 -> /CS4  (16 bit wide data path)
+ * GPIO86 -> GPIO free
+ * GPIO87 -> GPIO free
+ * GPIO90 -> LED0 on CPU module
+ * GPIO91 -> LED1 on CPI module
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ */
+
+static unsigned long pcm990_irq_enabled;
+
+static void pcm990_mask_ack_irq(unsigned int irq)
+{
+	int pcm990_irq = (irq - PCM027_IRQ(0));
+	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+}
+
+static void pcm990_unmask_irq(unsigned int irq)
+{
+	int pcm990_irq = (irq - PCM027_IRQ(0));
+	/* the irq can be acknowledged only if deasserted, so it's done here */
+	PCM990_INTSETCLR |= 1 << pcm990_irq;
+	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
+}
+
+static struct irq_chip pcm990_irq_chip = {
+	.mask_ack	= pcm990_mask_ack_irq,
+	.unmask		= pcm990_unmask_irq,
+};
+
+static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+
+	do {
+		GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
+					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+		if (likely(pending)) {
+			irq = PCM027_IRQ(0) + __ffs(pending);
+			desc = irq_desc + irq;
+			desc_handle_irq(irq, desc);
+		}
+		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+	} while (pending);
+}
+
+static void __init pcm990_init_irq(void)
+{
+	int irq;
+
+	/* setup extra PCM990 irqs */
+	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
+		set_irq_chip(irq, &pcm990_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
+	PCM990_INTSETCLR = 0xFF;
+
+	set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
+	set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
+}
+
+static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+			void *data)
+{
+	int err;
+
+	/*
+	 * enable GPIO for PXA27x MMC controller
+	 */
+	pxa_gpio_mode(GPIO32_MMCCLK_MD);
+	pxa_gpio_mode(GPIO112_MMCCMD_MD);
+	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
+			     "MMC card detect", data);
+	if (err)
+		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
+				"card detect IRQ\n");
+
+	return err;
+}
+
+static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask)
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+						PCM990_CTRL_MMC2PWR;
+	else
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+						~PCM990_CTRL_MMC2PWR;
+}
+
+static void pcm990_mci_exit(struct device *dev, void *data)
+{
+	free_irq(PCM027_MMCDET_IRQ, data);
+}
+
+#define MSECS_PER_JIFFY (1000/HZ)
+
+static struct pxamci_platform_data pcm990_mci_platform_data = {
+	.detect_delay	= 250 / MSECS_PER_JIFFY,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 		= pcm990_mci_init,
+	.setpower 	= pcm990_mci_setpower,
+	.exit		= pcm990_mci_exit,
+};
+
+/*
+ * init OHCI hardware to work with
+ *
+ * Note: Only USB port 1 (host only) is connected
+ *
+ * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
+ * GPIO89 (USBHPEN#1): power-on out, on when low
+ */
+static int pcm990_ohci_init(struct device *dev)
+{
+	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
+	pxa_gpio_mode(PCM990_USB_PWR_EN);
+	/*
+	 * disable USB port 2 and 3
+	 * power sense is active low
+	 */
+	UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
+				UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
+	/*
+	 * wait 10ms after Power on
+	 * overcurrent per port
+	 * power switch per port
+	 */
+	UHCRHDA = (5<<24) | (1<<11) | (1<<8);	/* FIXME: Required? */
+
+	return 0;
+}
+
+static struct pxaohci_platform_data pcm990_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= pcm990_ohci_init,
+	.exit		= NULL,
+};
+
+/*
+ * AC97 support
+ * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
+ */
+static struct resource pxa27x_ac97_resources[] = {
+	[0] = {
+		.start  = 0x40500000,
+		.end	= 0x40500000 + 0xfff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_AC97,
+		.end    = IRQ_AC97,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa27x_device_ac97 = {
+	.name           = "pxa2xx-ac97",
+	.id             = -1,
+	.dev            = {
+		.dma_mask = &pxa_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
+	.resource       = pxa27x_ac97_resources,
+};
+
+/*
+ * enable generic access to the base board control CPLDs U6 and U7
+ */
+static struct map_desc pcm990_io_desc[] __initdata = {
+	{
+		.virtual	= PCM990_CTRL_BASE,
+		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
+		.length		= PCM990_CTRL_SIZE,
+		.type		= MT_DEVICE	/* CPLD */
+	}, {
+		.virtual	= PCM990_CF_PLD_BASE,
+		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
+		.length		= PCM990_CF_PLD_SIZE,
+		.type		= MT_DEVICE	/* CPLD */
+	}
+};
+
+/*
+ * system init for baseboard usage. Will be called by pcm027 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm990_baseboard_init(void)
+{
+	/* register CPLD access */
+	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+
+	/* register CPLD's IRQ controller */
+	pcm990_init_irq();
+
+	platform_device_register(&pxa27x_device_ac97);
+
+	/* MMC */
+	pxa_set_mci_info(&pcm990_mci_platform_data);
+
+	/* USB host */
+	pxa_set_ohci_info(&pcm990_ohci_platform_data);
+
+	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+}
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index a941c71c7d06..039194cbe477 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -38,34 +38,37 @@ int pxa_pm_enter(suspend_state_t state)
 		iwmmxt_task_disable(NULL);
 #endif
 
-	pxa_cpu_pm_fns->save(sleep_save);
+	/* skip registers saving for standby */
+	if (state != PM_SUSPEND_STANDBY) {
+		pxa_cpu_pm_fns->save(sleep_save);
+		/* before sleeping, calculate and save a checksum */
+		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+			sleep_save_checksum += sleep_save[i];
+	}
 
 	/* Clear sleep reset status */
 	RCSR = RCSR_SMR;
 
-	/* before sleeping, calculate and save a checksum */
-	for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
-		sleep_save_checksum += sleep_save[i];
-
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
 	cpu_init();
 
-	/* after sleeping, validate the checksum */
-	for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
-		checksum += sleep_save[i];
+	if (state != PM_SUSPEND_STANDBY) {
+		/* after sleeping, validate the checksum */
+		for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+			checksum += sleep_save[i];
 
-	/* if invalid, display message and wait for a hardware reset */
-	if (checksum != sleep_save_checksum) {
+		/* if invalid, display message and wait for a hardware reset */
+		if (checksum != sleep_save_checksum) {
 #ifdef CONFIG_ARCH_LUBBOCK
-		LUB_HEXLED = 0xbadbadc5;
+			LUB_HEXLED = 0xbadbadc5;
 #endif
-		while (1)
-			pxa_cpu_pm_fns->enter(state);
+			while (1)
+				pxa_cpu_pm_fns->enter(state);
+		}
+		pxa_cpu_pm_fns->restore(sleep_save);
 	}
 
-	pxa_cpu_pm_fns->restore(sleep_save);
-
 	pr_debug("*** made it back from resume\n");
 
 	return 0;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 655668d4d0e9..dd54496083cb 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -215,12 +215,10 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
 
-	return 0;
+	return err;
 }
 
 static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 006a6e09589c..ddd05bf78e02 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -123,12 +123,15 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
+
+	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
+	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
+	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+
 	/*
 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
-	INIT_CKEN("SSPCLK",  SSP,  3686400,  0, NULL),
 	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
-	INIT_CKEN("NSSPCLK", NSSP, 3686400,  0, NULL),
 	*/
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
@@ -216,8 +219,6 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 
 static void pxa25x_cpu_pm_enter(suspend_state_t state)
 {
-	CKEN = 0;
-
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		/* set resume return address */
@@ -239,6 +240,8 @@ static void __init pxa25x_init_pm(void)
 {
 	pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
 }
+#else
+static inline void pxa25x_init_pm(void) {}
 #endif
 
 /* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
@@ -290,16 +293,15 @@ void __init pxa25x_init_irq(void)
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
-	&pxa_device_mci,
 	&pxa_device_udc,
-	&pxa_device_fb,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
-	&pxa_device_i2c,
 	&pxa_device_i2s,
-	&pxa_device_ficp,
 	&pxa_device_rtc,
+	&pxa25x_device_ssp,
+	&pxa25x_device_nssp,
+	&pxa25x_device_assp,
 };
 
 static int __init pxa25x_init(void)
@@ -315,9 +317,9 @@ static int __init pxa25x_init(void)
 
 		if ((ret = pxa_init_dma(16)))
 			return ret;
-#ifdef CONFIG_PM
+
 		pxa25x_init_pm();
-#endif
+
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
 	}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 57efebdc4324..96cf274ec7cb 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,6 +21,7 @@
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
@@ -151,11 +152,12 @@ static struct clk pxa27x_clks[] = {
 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
 	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
 
+	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+
 	/*
 	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
-	INIT_CKEN("SSPCLK",  SSP1, 13000000, 0, NULL),
-	INIT_CKEN("SSPCLK",  SSP2, 13000000, 0, NULL),
-	INIT_CKEN("SSPCLK",  SSP3, 13000000, 0, NULL),
 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
 	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
 	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -264,12 +266,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
 
-	if (state == PM_SUSPEND_STANDBY)
-		CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
-			(1 << CKEN_LCD) | (1 << CKEN_PWM0);
-	else
-		CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER);
-
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
 
@@ -305,6 +301,8 @@ static void __init pxa27x_init_pm(void)
 {
 	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
 }
+#else
+static inline void pxa27x_init_pm(void) {}
 #endif
 
 /* PXA27x:  Various gpios can issue wakeup events.  This logic only
@@ -374,37 +372,6 @@ void __init pxa27x_init_irq(void)
  * device registration specific to PXA27x.
  */
 
-static u64 pxa27x_dmamask = 0xffffffffUL;
-
-static struct resource pxa27x_ohci_resources[] = {
-	[0] = {
-		.start  = 0x4C000000,
-		.end    = 0x4C00ff6f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_USBH1,
-		.end    = IRQ_USBH1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_ohci = {
-	.name		= "pxa27x-ohci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa27x_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_ohci_resources),
-	.resource       = pxa27x_ohci_resources,
-};
-
-void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-{
-	pxa27x_device_ohci.dev.platform_data = info;
-}
-
 static struct resource i2c_power_resources[] = {
 	{
 		.start	= 0x40f00180,
@@ -430,18 +397,16 @@ void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_mci,
 	&pxa_device_udc,
-	&pxa_device_fb,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
-	&pxa_device_i2c,
 	&pxa_device_i2s,
-	&pxa_device_ficp,
 	&pxa_device_rtc,
 	&pxa27x_device_i2c_power,
-	&pxa27x_device_ohci,
+	&pxa27x_device_ssp1,
+	&pxa27x_device_ssp2,
+	&pxa27x_device_ssp3,
 };
 
 static int __init pxa27x_init(void)
@@ -452,9 +417,9 @@ static int __init pxa27x_init(void)
 
 		if ((ret = pxa_init_dma(32)))
 			return ret;
-#ifdef CONFIG_PM
+
 		pxa27x_init_pm();
-#endif
+
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 37e93f9ba8fc..5cbf057a1b32 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/pxa3xx-regs.h>
@@ -189,8 +190,237 @@ static struct clk pxa3xx_clks[] = {
 
 	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
 	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
+	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
+
+	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+
+	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
+	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
+#ifdef CONFIG_PM
+#define SLEEP_SAVE_SIZE	4
+
+#define ISRAM_START	0x5c000000
+#define ISRAM_SIZE	SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+	pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+
+	if (CKENA & (1 << CKEN_USBH)) {
+		printk(KERN_ERR "PM: USB host clock not stopped?\n");
+		CKENA &= ~(1 << CKEN_USBH);
+	}
+//	CKENA |= 1 << (CKEN_ISC & 31);
+
+	/*
+	 * Low power modes require the HSIO2 clock to be enabled.
+	 */
+	CKENB |= 1 << (CKEN_HSIO2 & 31);
+}
+
+static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
+{
+	CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+}
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+		    pm_enter_standby_end - pm_enter_standby_start);
+
+	AD2D0SR = ~0;
+	AD2D1SR = ~0;
+	AD2D0ER = wakeup_src;
+	AD2D1ER = 0;
+	ASCR = ASCR;
+	ARSR = ARSR;
+
+	local_fiq_disable();
+	fn(pwrmode);
+	local_fiq_enable();
+
+	AD2D0ER = 0;
+	AD2D1ER = 0;
+
+	printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+	/*
+	 * Don't sleep if no wakeup sources are defined
+	 */
+	if (wakeup_src == 0)
+		return;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+		break;
+
+	case PM_SUSPEND_MEM:
+		break;
+	}
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+	.save_size	= SLEEP_SAVE_SIZE,
+	.save		= pxa3xx_cpu_pm_save,
+	.restore	= pxa3xx_cpu_pm_restore,
+	.valid		= pxa3xx_cpu_pm_valid,
+	.enter		= pxa3xx_cpu_pm_enter,
 };
 
+static void __init pxa3xx_init_pm(void)
+{
+	sram = ioremap(ISRAM_START, ISRAM_SIZE);
+	if (!sram) {
+		printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+		return;
+	}
+
+	/*
+	 * Since we copy wakeup code into the SRAM, we need to ensure
+	 * that it is preserved over the low power modes.  Note: bit 8
+	 * is undocumented in the developer manual, but must be set.
+	 */
+	AD1R |= ADXR_L2 | ADXR_R0;
+	AD2R |= ADXR_L2 | ADXR_R0;
+	AD3R |= ADXR_L2 | ADXR_R0;
+
+	/*
+	 * Clear the resume enable registers.
+	 */
+	AD1D0ER = 0;
+	AD2D0ER = 0;
+	AD2D1ER = 0;
+	AD3ER = 0;
+
+	pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned long flags, mask = 0;
+
+	switch (irq) {
+	case IRQ_SSP3:
+		mask = ADXER_MFP_WSSP3;
+		break;
+	case IRQ_MSL:
+		mask = ADXER_WMSL0;
+		break;
+	case IRQ_USBH2:
+	case IRQ_USBH1:
+		mask = ADXER_WUSBH;
+		break;
+	case IRQ_KEYPAD:
+		mask = ADXER_WKP;
+		break;
+	case IRQ_AC97:
+		mask = ADXER_MFP_WAC97;
+		break;
+	case IRQ_USIM:
+		mask = ADXER_WUSIM0;
+		break;
+	case IRQ_SSP2:
+		mask = ADXER_MFP_WSSP2;
+		break;
+	case IRQ_I2C:
+		mask = ADXER_MFP_WI2C;
+		break;
+	case IRQ_STUART:
+		mask = ADXER_MFP_WUART3;
+		break;
+	case IRQ_BTUART:
+		mask = ADXER_MFP_WUART2;
+		break;
+	case IRQ_FFUART:
+		mask = ADXER_MFP_WUART1;
+		break;
+	case IRQ_MMC:
+		mask = ADXER_MFP_WMMC1;
+		break;
+	case IRQ_SSP:
+		mask = ADXER_MFP_WSSP1;
+		break;
+	case IRQ_RTCAlrm:
+		mask = ADXER_WRTC;
+		break;
+	case IRQ_SSP4:
+		mask = ADXER_MFP_WSSP4;
+		break;
+	case IRQ_TSI:
+		mask = ADXER_WTSI;
+		break;
+	case IRQ_USIM2:
+		mask = ADXER_WUSIM1;
+		break;
+	case IRQ_MMC2:
+		mask = ADXER_MFP_WMMC2;
+		break;
+	case IRQ_NAND:
+		mask = ADXER_MFP_WFLASH;
+		break;
+	case IRQ_USB2:
+		mask = ADXER_WUSB2;
+		break;
+	case IRQ_WAKEUP0:
+		mask = ADXER_WEXTWAKE0;
+		break;
+	case IRQ_WAKEUP1:
+		mask = ADXER_WEXTWAKE1;
+		break;
+	case IRQ_MMC3:
+		mask = ADXER_MFP_GEN12;
+		break;
+	}
+
+	local_irq_save(flags);
+	if (on)
+		wakeup_src |= mask;
+	else
+		wakeup_src &= ~mask;
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void pxa3xx_init_irq_pm(void)
+{
+	pxa_init_irq_set_wake(pxa3xx_set_wake);
+}
+
+#else
+static inline void pxa3xx_init_pm(void) {}
+static inline void pxa3xx_init_irq_pm(void) {}
+#endif
+
 void __init pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
@@ -202,6 +432,7 @@ void __init pxa3xx_init_irq(void)
 	pxa_init_irq_low();
 	pxa_init_irq_high();
 	pxa_init_irq_gpio(128);
+	pxa3xx_init_irq_pm();
 }
 
 /*
@@ -209,16 +440,16 @@ void __init pxa3xx_init_irq(void)
  */
 
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_mci,
 	&pxa_device_udc,
-	&pxa_device_fb,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
-	&pxa_device_i2c,
 	&pxa_device_i2s,
-	&pxa_device_ficp,
 	&pxa_device_rtc,
+	&pxa27x_device_ssp1,
+	&pxa27x_device_ssp2,
+	&pxa27x_device_ssp3,
+	&pxa3xx_device_ssp4,
 };
 
 static int __init pxa3xx_init(void)
@@ -231,6 +462,8 @@ static int __init pxa3xx_init(void)
 		if ((ret = pxa_init_dma(32)))
 			return ret;
 
+		pxa3xx_init_pm();
+
 		return platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 	return 0;
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index da4769caaf72..047909a76651 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -26,28 +26,15 @@ void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
 
 
 /*
- * SharpSL Backlight
+ * SharpSL/Corgi LCD Driver
  */
-void corgi_bl_set_intensity(int intensity);
-void spitz_bl_set_intensity(int intensity);
-void akita_bl_set_intensity(int intensity);
-
-
-/*
- * SharpSL Touchscreen Driver
- */
-unsigned long corgi_get_hsync_len(void);
-unsigned long spitz_get_hsync_len(void);
-void corgi_put_hsync(void);
-void spitz_put_hsync(void);
-void corgi_wait_hsync(void);
-void spitz_wait_hsync(void);
+void corgi_lcdtg_suspend(void);
+void corgi_lcdtg_hw_init(int mode);
 
 
 /*
  * SharpSL Battery/PM Driver
  */
-
 #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
 
 /* MAX1111 Channel Definitions */
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index d0447723b73a..14bb4a93ea52 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -16,6 +16,7 @@
 #include <asm/hardware.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
@@ -49,6 +50,7 @@ pxa_cpu_save_sp:
 	str	r0, [r1]
 	ldr	pc, [sp], #4
 
+#ifdef CONFIG_PXA27x
 /*
  * pxa27x_cpu_suspend()
  *
@@ -104,9 +106,11 @@ ENTRY(pxa27x_cpu_suspend)
 
 	@ align execution to a cache line
 	b	pxa_cpu_do_suspend
+#endif
 
+#ifdef CONFIG_PXA25x
 /*
- * pxa27x_cpu_suspend()
+ * pxa25x_cpu_suspend()
  *
  * Forces CPU into sleep state.
  *
@@ -169,6 +173,7 @@ ENTRY(pxa25x_cpu_suspend)
 	mcr	p14, 0, r0, c6, c0, 0
 	orr	r0, r0, #2			@ initiate change bit
 	b	pxa_cpu_do_suspend
+#endif
 
 	.ltorg
 	.align	5
@@ -208,7 +213,7 @@ pxa_cpu_do_suspend:
 20:	b	20b				@ loop waiting for sleep
 
 /*
- * cpu_pxa_resume()
+ * pxa_cpu_resume()
  *
  * entry point from bootloader into kernel during resume
  *
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2d78199d24af..5078edeadf96 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -271,6 +271,55 @@ static struct platform_device spitzled_device = {
 /*
  * Spitz Touch Screen Device
  */
+
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
+static unsigned long spitz_get_hsync_invperiod(void)
+{
+#ifdef CONFIG_FB_PXA
+	if (!spitz_pxafb_dev) {
+		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+		if (!spitz_pxafb_dev)
+			return 0;
+	}
+	if (!get_hsync_invperiod)
+		get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
+	if (!get_hsync_invperiod)
+#endif
+		return 0;
+
+	return get_hsync_invperiod(spitz_pxafb_dev);
+}
+
+static void spitz_put_hsync(void)
+{
+	put_device(spitz_pxafb_dev);
+	if (get_hsync_invperiod)
+		symbol_put(pxafb_get_hsync_time);
+	spitz_pxafb_dev = NULL;
+	get_hsync_invperiod = NULL;
+}
+
+static void spitz_wait_hsync(void)
+{
+	sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+}
+
 static struct resource spitzts_resources[] = {
 	[0] = {
 		.start		= SPITZ_IRQ_GPIO_TP_INT,
@@ -280,9 +329,9 @@ static struct resource spitzts_resources[] = {
 };
 
 static struct corgits_machinfo  spitz_ts_machinfo = {
-	.get_hsync_len   = spitz_get_hsync_len,
-	.put_hsync       = spitz_put_hsync,
-	.wait_hsync      = spitz_wait_hsync,
+	.get_hsync_invperiod = spitz_get_hsync_invperiod,
+	.put_hsync           = spitz_put_hsync,
+	.wait_hsync          = spitz_wait_hsync,
 };
 
 static struct platform_device spitzts_device = {
@@ -325,12 +374,10 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
 	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
 
-	return 0;
+	return err;
 }
 
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
@@ -423,6 +470,14 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
  * Spitz PXA Framebuffer
  */
 
+static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	if (on)
+		corgi_lcdtg_hw_init(var->xres);
+	else
+		corgi_lcdtg_suspend();
+}
+
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
 	.pixclock       = 19231,
@@ -520,6 +575,27 @@ static void __init common_init(void)
 	set_pxa_fb_info(&spitz_pxafb_info);
 }
 
+#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
+static void spitz_bl_set_intensity(int intensity)
+{
+	if (intensity > 0x10)
+		intensity += 0x10;
+
+	/* Bits 0-4 are accessed via the SSP interface */
+	corgi_ssp_blduty_set(intensity & 0x1f);
+
+	/* Bit 5 is via SCOOP */
+	if (intensity & 0x0020)
+		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+	else
+		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+
+	if (intensity)
+		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+	else
+		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+}
+
 static void __init spitz_init(void)
 {
 	platform_scoop_config = &spitz_pcmcia_config;
@@ -530,6 +606,7 @@ static void __init spitz_init(void)
 
 	platform_device_register(&spitzscoop2_device);
 }
+#endif
 
 #ifdef CONFIG_MACH_AKITA
 /*
@@ -542,6 +619,26 @@ struct platform_device akitaioexp_device = {
 
 EXPORT_SYMBOL_GPL(akitaioexp_device);
 
+static void akita_bl_set_intensity(int intensity)
+{
+	if (intensity > 0x10)
+		intensity += 0x10;
+
+	/* Bits 0-4 are accessed via the SSP interface */
+	corgi_ssp_blduty_set(intensity & 0x1f);
+
+	/* Bit 5 is via IO-Expander */
+	if (intensity & 0x0020)
+		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+	else
+		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+
+	if (intensity)
+		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+	else
+		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+}
+
 static void __init akita_init(void)
 {
 	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
@@ -558,7 +655,6 @@ static void __init akita_init(void)
 }
 #endif
 
-
 static void __init fixup_spitz(struct machine_desc *desc,
 		struct tag *tags, char **cmdline, struct meminfo *mi)
 {
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index b2eb38543d1c..00af7f2fed66 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -32,45 +32,27 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa-regs.h>
-
-#define PXA_SSP_PORTS 	3
+#include <asm/arch/regs-ssp.h>
 
 #define TIMEOUT 100000
 
-struct ssp_info_ {
-	int irq;
-	u32 clock;
-};
-
-/*
- * SSP port clock and IRQ settings
- */
-static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
-#if defined (CONFIG_PXA27x)
-	{IRQ_SSP,	CKEN_SSP1},
-	{IRQ_SSP2,	CKEN_SSP2},
-	{IRQ_SSP3,	CKEN_SSP3},
-#else
-	{IRQ_SSP,	CKEN_SSP},
-	{IRQ_NSSP,	CKEN_NSSP},
-	{IRQ_ASSP,	CKEN_ASSP},
-#endif
-};
-
-static DEFINE_MUTEX(mutex);
-static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
-
 static irqreturn_t ssp_interrupt(int irq, void *dev_id)
 {
 	struct ssp_dev *dev = dev_id;
-	unsigned int status = SSSR_P(dev->port);
+	struct ssp_device *ssp = dev->ssp;
+	unsigned int status;
 
-	SSSR_P(dev->port) = status; /* clear status bits */
+	status = __raw_readl(ssp->mmio_base + SSSR);
+	__raw_writel(status, ssp->mmio_base + SSSR);
 
 	if (status & SSSR_ROR)
 		printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port);
@@ -99,15 +81,16 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id)
  */
 int ssp_write_word(struct ssp_dev *dev, u32 data)
 {
+	struct ssp_device *ssp = dev->ssp;
 	int timeout = TIMEOUT;
 
-	while (!(SSSR_P(dev->port) & SSSR_TNF)) {
+	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) {
 	        if (!--timeout)
 	        	return -ETIMEDOUT;
 		cpu_relax();
 	}
 
-	SSDR_P(dev->port) = data;
+	__raw_writel(data, ssp->mmio_base + SSDR);
 
 	return 0;
 }
@@ -129,15 +112,16 @@ int ssp_write_word(struct ssp_dev *dev, u32 data)
  */
 int ssp_read_word(struct ssp_dev *dev, u32 *data)
 {
+	struct ssp_device *ssp = dev->ssp;
 	int timeout = TIMEOUT;
 
-	while (!(SSSR_P(dev->port) & SSSR_RNE)) {
+	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) {
 	        if (!--timeout)
 	        	return -ETIMEDOUT;
 		cpu_relax();
 	}
 
-	*data = SSDR_P(dev->port);
+	*data = __raw_readl(ssp->mmio_base + SSDR);
 	return 0;
 }
 
@@ -151,17 +135,28 @@ int ssp_read_word(struct ssp_dev *dev, u32 *data)
  */
 int ssp_flush(struct ssp_dev *dev)
 {
+	struct ssp_device *ssp = dev->ssp;
 	int timeout = TIMEOUT * 2;
 
+	/* ensure TX FIFO is empty instead of not full */
+	if (cpu_is_pxa3xx()) {
+		while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) {
+			if (!--timeout)
+				return -ETIMEDOUT;
+			cpu_relax();
+		}
+		timeout = TIMEOUT * 2;
+	}
+
 	do {
-		while (SSSR_P(dev->port) & SSSR_RNE) {
+		while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) {
 		        if (!--timeout)
 		        	return -ETIMEDOUT;
-			(void) SSDR_P(dev->port);
+			(void)__raw_readl(ssp->mmio_base + SSDR);
 		}
 	        if (!--timeout)
 	        	return -ETIMEDOUT;
-	} while (SSSR_P(dev->port) & SSSR_BSY);
+	} while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY);
 
 	return 0;
 }
@@ -173,7 +168,12 @@ int ssp_flush(struct ssp_dev *dev)
  */
 void ssp_enable(struct ssp_dev *dev)
 {
-	SSCR0_P(dev->port) |= SSCR0_SSE;
+	struct ssp_device *ssp = dev->ssp;
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	sscr0 |= SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
 }
 
 /**
@@ -183,7 +183,12 @@ void ssp_enable(struct ssp_dev *dev)
  */
 void ssp_disable(struct ssp_dev *dev)
 {
-	SSCR0_P(dev->port) &= ~SSCR0_SSE;
+	struct ssp_device *ssp = dev->ssp;
+	uint32_t sscr0;
+
+	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	sscr0 &= ~SSCR0_SSE;
+	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
 }
 
 /**
@@ -192,14 +197,16 @@ void ssp_disable(struct ssp_dev *dev)
  *
  * Save the configured SSP state for suspend.
  */
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state)
 {
-	ssp->cr0 = SSCR0_P(dev->port);
-	ssp->cr1 = SSCR1_P(dev->port);
-	ssp->to = SSTO_P(dev->port);
-	ssp->psp = SSPSP_P(dev->port);
+	struct ssp_device *ssp = dev->ssp;
+
+	state->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	state->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+	state->to  = __raw_readl(ssp->mmio_base + SSTO);
+	state->psp = __raw_readl(ssp->mmio_base + SSPSP);
 
-	SSCR0_P(dev->port) &= ~SSCR0_SSE;
+	ssp_disable(dev);
 }
 
 /**
@@ -208,16 +215,18 @@ void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp)
  *
  * Restore the SSP configuration saved previously by ssp_save_state.
  */
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state)
 {
-	SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+	struct ssp_device *ssp = dev->ssp;
+	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
 
-	SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE;
-	SSCR1_P(dev->port) = ssp->cr1;
-	SSTO_P(dev->port) = ssp->to;
-	SSPSP_P(dev->port) = ssp->psp;
+	__raw_writel(sssr, ssp->mmio_base + SSSR);
 
-	SSCR0_P(dev->port) = ssp->cr0;
+	__raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+	__raw_writel(state->cr1, ssp->mmio_base + SSCR1);
+	__raw_writel(state->to,  ssp->mmio_base + SSTO);
+	__raw_writel(state->psp, ssp->mmio_base + SSPSP);
+	__raw_writel(state->cr0, ssp->mmio_base + SSCR0);
 }
 
 /**
@@ -231,15 +240,17 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp)
  */
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed)
 {
+	struct ssp_device *ssp = dev->ssp;
+
 	dev->mode = mode;
 	dev->flags = flags;
 	dev->psp_flags = psp_flags;
 	dev->speed = speed;
 
 	/* set up port type, speed, port settings */
-	SSCR0_P(dev->port) = (dev->speed | dev->mode);
-	SSCR1_P(dev->port) = dev->flags;
-	SSPSP_P(dev->port) = dev->psp_flags;
+	__raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0);
+	__raw_writel(dev->flags, ssp->mmio_base + SSCR1);
+	__raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP);
 
 	return 0;
 }
@@ -256,44 +267,32 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee
  */
 int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 {
+	struct ssp_device *ssp;
 	int ret;
 
-	if (port > PXA_SSP_PORTS || port == 0)
+	ssp = ssp_request(port, "SSP");
+	if (ssp == NULL)
 		return -ENODEV;
 
-	mutex_lock(&mutex);
-	if (use_count[port - 1]) {
-		mutex_unlock(&mutex);
-		return -EBUSY;
-	}
-	use_count[port - 1]++;
-
-	if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) {
-		use_count[port - 1]--;
-		mutex_unlock(&mutex);
-		return -EBUSY;
-	}
+	dev->ssp = ssp;
 	dev->port = port;
 
 	/* do we need to get irq */
 	if (!(init_flags & SSP_NO_IRQ)) {
-		ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+		ret = request_irq(ssp->irq, ssp_interrupt,
 				0, "SSP", dev);
 	    	if (ret)
 			goto out_region;
-	    	dev->irq = ssp_info[port-1].irq;
+		dev->irq = ssp->irq;
 	} else
 		dev->irq = 0;
 
 	/* turn on SSP port clock */
-	pxa_set_cken(ssp_info[port-1].clock, 1);
-	mutex_unlock(&mutex);
+	clk_enable(ssp->clk);
 	return 0;
 
 out_region:
-	release_mem_region(__PREG(SSCR0_P(port)), 0x2c);
-	use_count[port - 1]--;
-	mutex_unlock(&mutex);
+	ssp_free(ssp);
 	return ret;
 }
 
@@ -304,23 +303,240 @@ out_region:
  */
 void ssp_exit(struct ssp_dev *dev)
 {
-	mutex_lock(&mutex);
-	SSCR0_P(dev->port) &= ~SSCR0_SSE;
+	struct ssp_device *ssp = dev->ssp;
+
+	ssp_disable(dev);
+	free_irq(dev->irq, dev);
+	clk_disable(ssp->clk);
+	ssp_free(ssp);
+}
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (ssp->port_id != port)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(ssp_request);
+
+void ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(&ssp->pdev->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(ssp_free);
+
+static int __devinit ssp_probe(struct platform_device *pdev, int type)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+	int ret = 0;
+
+	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory");
+		return -ENOMEM;
+	}
+
+	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
+	if (IS_ERR(ssp->clk)) {
+		ret = PTR_ERR(ssp->clk);
+		goto err_free;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	res = request_mem_region(res->start, res->end - res->start + 1,
+			pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	ssp->phys_base = res->start;
+
+	ssp->mmio_base = ioremap(res->start, res->end - res->start + 1);
+	if (ssp->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		ret = -ENODEV;
+		goto err_free_io;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_io;
+	}
+	ssp->drcmr_rx = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_io;
+	}
+	ssp->drcmr_tx = res->start;
+
+	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+	 * starts from 0, do a translation here
+	 */
+	ssp->port_id = pdev->id + 1;
+	ssp->use_count = 0;
+	ssp->type = type;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	platform_set_drvdata(pdev, ssp);
+	return 0;
+
+err_free_io:
+	iounmap(ssp->mmio_base);
+err_free_mem:
+	release_mem_region(res->start, res->end - res->start + 1);
+err_free_clk:
+	clk_put(ssp->clk);
+err_free:
+	kfree(ssp);
+	return ret;
+}
+
+static int __devexit ssp_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+
+	ssp = platform_get_drvdata(pdev);
+	if (ssp == NULL)
+		return -ENODEV;
+
+	iounmap(ssp->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	clk_put(ssp->clk);
 
-    	if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
-		printk(KERN_WARNING "SSP: tried to close invalid port\n");
-		mutex_unlock(&mutex);
-		return;
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	kfree(ssp);
+	return 0;
+}
+
+static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
+{
+	return ssp_probe(pdev, PXA25x_SSP);
+}
+
+static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
+{
+	return ssp_probe(pdev, PXA25x_NSSP);
+}
+
+static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
+{
+	return ssp_probe(pdev, PXA27x_SSP);
+}
+
+static struct platform_driver pxa25x_ssp_driver = {
+	.driver		= {
+		.name	= "pxa25x-ssp",
+	},
+	.probe		= pxa25x_ssp_probe,
+	.remove		= __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa25x_nssp_driver = {
+	.driver		= {
+		.name	= "pxa25x-nssp",
+	},
+	.probe		= pxa25x_nssp_probe,
+	.remove		= __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa27x_ssp_driver = {
+	.driver		= {
+		.name	= "pxa27x-ssp",
+	},
+	.probe		= pxa27x_ssp_probe,
+	.remove		= __devexit_p(ssp_remove),
+};
+
+static int __init pxa_ssp_init(void)
+{
+	int ret = 0;
+
+	ret = platform_driver_register(&pxa25x_ssp_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa25x_ssp_driver");
+		return ret;
+	}
+
+	ret = platform_driver_register(&pxa25x_nssp_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa25x_nssp_driver");
+		return ret;
+	}
+
+	ret = platform_driver_register(&pxa27x_ssp_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa27x_ssp_driver");
+		return ret;
 	}
 
-	pxa_set_cken(ssp_info[dev->port-1].clock, 0);
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-	release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
-	use_count[dev->port - 1]--;
-	mutex_unlock(&mutex);
+	return ret;
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+	platform_driver_unregister(&pxa25x_ssp_driver);
+	platform_driver_unregister(&pxa25x_nssp_driver);
+	platform_driver_unregister(&pxa27x_ssp_driver);
 }
 
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
 EXPORT_SYMBOL(ssp_write_word);
 EXPORT_SYMBOL(ssp_read_word);
 EXPORT_SYMBOL(ssp_flush);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index d774430d02c0..167412e6bec8 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -17,6 +17,7 @@
 
 		.text
 
+#ifdef CONFIG_PXA27x
 ENTRY(pxa_cpu_standby)
 	ldr	r0, =PSSR
 	mov	r1, #(PSSR_PH | PSSR_STS)
@@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby)
 1:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
 	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
 	mov	pc, lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG		0x0000
+#define MDCNFG_DMCEN	(1 << 30)
+#define DDR_HCAL	0x0060
+#define DDR_HCAL_HCRNG	0x1f
+#define DDR_HCAL_HCPROG	(1 << 28)
+#define DDR_HCAL_HCEN	(1 << 31)
+#define DMCIER		0x0070
+#define DMCIER_EDLP	(1 << 29)
+#define DMCISR		0x0078
+#define RCOMP		0x0100
+#define RCOMP_SWEVAL	(1 << 31)
+
+ENTRY(pm_enter_standby_start)
+	mov	r1, #0xf6000000		@ DMEMC_REG_BASE (MDCNFG)
+	add	r1, r1, #0x00100000
+
+	/*
+	 * Preload the TLB entry for accessing the dynamic memory
+	 * controller registers.  Note that page table lookups will
+	 * fail until the dynamic memory controller has been
+	 * reinitialised - and that includes MMU page table walks.
+	 * This also means that only the dynamic memory controller
+	 * can be reliably accessed in the code following standby.
+	 */
+	ldr	r2, [r1]		@ Dummy read MDCNFG
+
+	mcr	p14, 0, r0, c7, c0, 0
+	.rept	8
+	nop
+	.endr
+
+	ldr	r0, [r1, #DDR_HCAL]	@ Clear (and wait for) HCEN
+	bic	r0, r0, #DDR_HCAL_HCEN
+	str	r0, [r1, #DDR_HCAL]
+1:	ldr	r0, [r1, #DDR_HCAL]
+	tst	r0, #DDR_HCAL_HCEN
+	bne	1b
+
+	ldr	r0, [r1, #RCOMP]	@ Initiate RCOMP
+	orr	r0, r0, #RCOMP_SWEVAL
+	str	r0, [r1, #RCOMP]
+
+	mov	r0, #~0			@ Clear interrupts
+	str	r0, [r1, #DMCISR]
+
+	ldr	r0, [r1, #DMCIER]	@ set DMIER[EDLP]
+	orr	r0, r0, #DMCIER_EDLP
+	str	r0, [r1, #DMCIER]
+
+	ldr	r0, [r1, #DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
+	bic	r0, r0, #DDR_HCAL_HCRNG
+	orr	r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+	str	r0, [r1, #DDR_HCAL]
+
+1:	ldr	r0, [r1, #DMCISR]
+	tst	r0, #DMCIER_EDLP
+	beq	1b
+
+	ldr	r0, [r1, #MDCNFG]	@ set MDCNFG[DMCEN]
+	orr	r0, r0, #MDCNFG_DMCEN
+	str	r0, [r1, #MDCNFG]
+1:	ldr	r0, [r1, #MDCNFG]
+	tst	r0, #MDCNFG_DMCEN
+	beq	1b
+
+	ldr	r0, [r1, #DDR_HCAL]	@ set DDR_HCAL[HCRNG]
+	orr	r0, r0, #2 @ HCRNG
+	str	r0, [r1, #DDR_HCAL]
+
+	ldr	r0, [r1, #DMCIER]	@ Clear the interrupt
+	bic	r0, r0, #0x20000000
+	str	r0, [r1, #DMCIER]
+
+	mov	pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index fbfa1920353d..7b7c0179795b 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -59,55 +59,17 @@ unsigned long long sched_clock(void)
 }
 
 
+#define MIN_OSCR_DELTA 16
+
 static irqreturn_t
 pxa_ost0_interrupt(int irq, void *dev_id)
 {
-	int next_match;
 	struct clock_event_device *c = dev_id;
 
-	if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
-		/* Disarm the compare/match, signal the event. */
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		c->event_handler(c);
-	} else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
-		/* Call the event handler as many times as necessary
-		 * to recover missed events, if any (if we update
-		 * OSMR0 and OSCR0 is still ahead of us, we've missed
-		 * the event).  As we're dealing with that, re-arm the
-		 * compare/match for the next event.
-		 *
-		 * HACK ALERT:
-		 *
-		 * There's a latency between the instruction that
-		 * writes to OSMR0 and the actual commit to the
-		 * physical hardware, because the CPU doesn't (have
-		 * to) run at bus speed, there's a write buffer
-		 * between the CPU and the bus, etc. etc.  So if the
-		 * target OSCR0 is "very close", to the OSMR0 load
-		 * value, the update to OSMR0 might not get to the
-		 * hardware in time and we'll miss that interrupt.
-		 *
-		 * To be safe, if the new OSMR0 is "very close" to the
-		 * target OSCR0 value, we call the event_handler as
-		 * though the event actually happened.  According to
-		 * Nico's comment in the previous version of this
-		 * code, experience has shown that 6 OSCR ticks is
-		 * "very close" but he went with 8.  We will use 16,
-		 * based on the results of testing on PXA270.
-		 *
-		 * To be doubly sure, we also tell clkevt via
-		 * clockevents_register_device() not to ask for
-		 * anything that might put us "very close".
-	 */
-#define MIN_OSCR_DELTA 16
-		do {
-			OSSR = OSSR_M0;
-			next_match = (OSMR0 += LATCH);
-			c->event_handler(c);
-		} while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
-			 && (c->mode == CLOCK_EVT_MODE_PERIODIC));
-	}
+	/* Disarm the compare/match, signal the event. */
+	OIER &= ~OIER_E0;
+	OSSR = OSSR_M0;
+	c->event_handler(c);
 
 	return IRQ_HANDLED;
 }
@@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 	unsigned long irqflags;
 
 	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		raw_local_irq_save(irqflags);
-		OSSR = OSSR_M0;
-		OIER |= OIER_E0;
-		OSMR0 = OSCR + LATCH;
-		raw_local_irq_restore(irqflags);
-		break;
-
 	case CLOCK_EVT_MODE_ONESHOT:
 		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
@@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
 		break;
 	}
 }
 
 static struct clock_event_device ckevt_pxa_osmr0 = {
 	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.rating		= 200,
 	.cpumask	= CPU_MASK_CPU0,
@@ -214,7 +169,7 @@ static void __init pxa_timer_init(void)
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
+		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
 
 	cksrc_pxa_oscr0.mult =
 		clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
@@ -226,7 +181,7 @@ static void __init pxa_timer_init(void)
 }
 
 #ifdef CONFIG_PM
-static unsigned long osmr[4], oier;
+static unsigned long osmr[4], oier, oscr;
 
 static void pxa_timer_suspend(void)
 {
@@ -235,23 +190,26 @@ static void pxa_timer_suspend(void)
 	osmr[2] = OSMR2;
 	osmr[3] = OSMR3;
 	oier = OIER;
+	oscr = OSCR;
 }
 
 static void pxa_timer_resume(void)
 {
+	/*
+	 * Ensure that we have at least MIN_OSCR_DELTA between match
+	 * register 0 and the OSCR, to guarantee that we will receive
+	 * the one-shot timer interrupt.  We adjust OSMR0 in preference
+	 * to OSCR to guarantee that OSCR is monotonically incrementing.
+	 */
+	if (osmr[0] - oscr < MIN_OSCR_DELTA)
+		osmr[0] += MIN_OSCR_DELTA;
+
 	OSMR0 = osmr[0];
 	OSMR1 = osmr[1];
 	OSMR2 = osmr[2];
 	OSMR3 = osmr[3];
 	OIER = oier;
-
-	/*
-	 * OSCR0 is the system timer, which has to increase
-	 * monotonically until it rolls over in hardware.  The value
-	 * (OSMR0 - LATCH) is OSCR0 at the most recent system tick,
-	 * which is a handy value to restore to OSCR0.
-	 */
-	OSCR = OSMR0 - LATCH;
+	OSCR = oscr;
 }
 #else
 #define pxa_timer_suspend NULL
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 240fd042083d..1919756900f4 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -184,16 +184,13 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
-	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED,
+	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
+			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
-
-	set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
 
-	return 0;
+	return err;
 }
 
 static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index e4ba43bdf85d..853fc9433750 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -296,11 +296,10 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, v
 	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING,
 			  "MMC card detect", data);
-	if (err) {
+	if (err)
 		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		return -1;
-	}
-	return 0;
+
+	return err;
 }
 
 static void trizeps4_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 743a87b2faa1..7731d50dd86c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -25,9 +25,13 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/zylonite.h>
+#include <asm/arch/mmc.h>
 
 #include "generic.h"
 
+#define MAX_SLOTS	3
+struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
+
 int gpio_backlight;
 int gpio_eth_irq;
 
@@ -43,7 +47,7 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= -1,	/* for run-time assignment */
 		.end	= -1,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
@@ -156,6 +160,95 @@ static void __init zylonite_init_lcd(void)
 static inline void zylonite_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_MMC)
+static int zylonite_mci_ro(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int zylonite_mci_init(struct device *dev,
+			     irq_handler_t zylonite_detect_int,
+			     void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int err, cd_irq, gpio_cd, gpio_wp;
+
+	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+	/*
+	 * setup GPIO for Zylonite MMC controller
+	 */
+	err = gpio_request(gpio_cd, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+	gpio_direction_input(gpio_cd);
+
+	err = gpio_request(gpio_wp, "mmc write protect");
+	if (err)
+		goto err_request_wp;
+	gpio_direction_input(gpio_wp);
+
+	err = request_irq(cd_irq, zylonite_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: MMC/SD/SDIO: "
+				"can't request card detect IRQ\n", __func__);
+		goto err_request_irq;
+	}
+
+	return 0;
+
+err_request_irq:
+	gpio_free(gpio_wp);
+err_request_wp:
+	gpio_free(gpio_cd);
+err_request_cd:
+	return err;
+}
+
+static void zylonite_mci_exit(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int cd_irq, gpio_cd, gpio_wp;
+
+	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+	free_irq(cd_irq, data);
+	gpio_free(gpio_cd);
+	gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data zylonite_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= zylonite_mci_init,
+	.exit		= zylonite_mci_exit,
+	.get_ro		= zylonite_mci_ro,
+};
+
+static struct pxamci_platform_data zylonite_mci2_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init zylonite_init_mmc(void)
+{
+	pxa_set_mci_info(&zylonite_mci_platform_data);
+	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
+	if (cpu_is_pxa310())
+		pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+}
+#else
+static inline void zylonite_init_mmc(void) {}
+#endif
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -171,6 +264,7 @@ static void __init zylonite_init(void)
 	platform_device_register(&smc91x_device);
 
 	zylonite_init_lcd();
+	zylonite_init_mmc();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 1832bc316501..6ac04c09b0e9 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 
 	/* BTUART */
 	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
 	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
 
 	/* STUART */
 	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
 
 	/* AC97 */
 	GPIO23_AC97_nACRESET,
@@ -70,16 +70,16 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO28_AC97_SYNC,
 
 	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO2_2_KP_MKIN_6,
-	GPIO3_2_KP_MKIN_7,
+	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
 	GPIO121_KP_MKOUT_0,
 	GPIO122_KP_MKOUT_1,
 	GPIO123_KP_MKOUT_2,
@@ -88,16 +88,33 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO4_2_KP_MKOUT_5,
 	GPIO5_2_KP_MKOUT_6,
 	GPIO6_2_KP_MKOUT_7,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
 	/* FFUART */
-	GPIO30_UART1_RXD,
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
 	GPIO31_UART1_TXD,
 	GPIO32_UART1_CTS,
 	GPIO37_UART1_RTS,
 	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
 	GPIO35_UART1_RI,
 	GPIO36_UART1_DTR,
 
@@ -108,7 +125,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
 
 static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
 	/* FFUART */
-	GPIO99_UART1_RXD,
+	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
 	GPIO100_UART1_TXD,
 	GPIO101_UART1_CTS,
 	GPIO106_UART1_RTS,
@@ -116,6 +133,14 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	GPIO2_nCS3,
 	GPIO102_GPIO,
+
+	/* MMC3 */
+	GPIO7_2_MMC3_DAT0,
+	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO9_2_MMC3_DAT2,
+	GPIO10_2_MMC3_DAT3,
+	GPIO103_MMC3_CLK,
+	GPIO105_MMC3_CMD,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -174,6 +199,10 @@ void __init zylonite_pxa300_init(void)
 
 		/* GPIO pin assignment */
 		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+
+		/* MMC card detect & write protect for controller 0 */
+		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
+		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
 	}
 
 	if (cpu_is_pxa300()) {
@@ -184,5 +213,9 @@ void __init zylonite_pxa300_init(void)
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+
+		/* MMC card detect & write protect for controller 2 */
+		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
+		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 94c715808b59..dfa79992b8ab 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -51,11 +51,11 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO17_2_LCD_BIAS,
 
 	/* FFUART */
-	GPIO41_UART1_RXD,
+	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
 	GPIO42_UART1_TXD,
 	GPIO43_UART1_CTS,
 	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
+	GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
 	GPIO46_UART1_RI,
 	GPIO47_UART1_DTR,
 	GPIO48_UART1_RTS,
@@ -73,16 +73,16 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO33_I2C_SDA,
 
 	/* Keypad */
-	GPIO105_KP_DKIN_0,
-	GPIO106_KP_DKIN_1,
-	GPIO113_KP_MKIN_0,
-	GPIO114_KP_MKIN_1,
-	GPIO115_KP_MKIN_2,
-	GPIO116_KP_MKIN_3,
-	GPIO117_KP_MKIN_4,
-	GPIO118_KP_MKIN_5,
-	GPIO119_KP_MKIN_6,
-	GPIO120_KP_MKIN_7,
+	GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
 	GPIO121_KP_MKOUT_0,
 	GPIO122_KP_MKOUT_1,
 	GPIO123_KP_MKOUT_2,
@@ -95,6 +95,23 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	/* Ethernet */
 	GPIO4_nCS3,
 	GPIO90_GPIO,
+
+	/* MMC1 */
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
+	GPIO31_GPIO,	/* CMD1 default as GPIO for slot 0 */
+
+	/* MMC2 */
+	GPIO24_MMC2_DAT0,
+	GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO26_MMC2_DAT2,
+	GPIO27_MMC2_DAT3,
+	GPIO28_MMC2_CLK,
+	GPIO29_MMC2_CMD,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -169,5 +186,9 @@ void __init zylonite_pxa320_init(void)
 		/* GPIO pin assignment */
 		gpio_backlight	= mfp_to_gpio(MFP_PIN_GPIO14);
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+
+		/* MMC card detect & write protect for controller 0 */
+		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
+		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
 	}
 }
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 83a5f8b91857..f455233af082 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -29,7 +29,7 @@ static struct resource smc91x_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.flags  = IORESOURCE_IRQ,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };