CS89x0 : add CS89x0 platform device to the iMX31ADS board

Add CS89x0 networking support to the iMX31ADS board by using the
platform driver support in the CS89x0 driver.

Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 34 insertions, 38 deletions

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3a4fb2e5fc68..c032fe8d3e0b 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -26,7 +26,6 @@ CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
@@ -82,8 +81,9 @@ CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
-CONFIG_FEC=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4917aab0e253..4518e5448227 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -28,7 +28,6 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31ads.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -39,6 +38,9 @@
 
 #include "devices-imx31.h"
 
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS	MX31_CS4_BASE_ADDR_VIRT
+
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016
 
@@ -62,6 +64,7 @@
 #define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
+#define MXC_EXP_IO_BASE		MXC_BOARD_IRQ_START
 #define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
 
 #define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
@@ -69,6 +72,10 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
+/* CS8900 */
+#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
+#define CS4_CS8900_MMIO_START	0x20000
+
 /*
  * The serial port definition structure.
  */
@@ -101,11 +108,29 @@ static struct platform_device serial_device = {
 	},
 };
 
+static const struct resource mx31ads_cs8900_resources[] __initconst = {
+	DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
+	DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
+};
+
+static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
+	.name = "cs89x0",
+	.id = 0,
+	.res = mx31ads_cs8900_resources,
+	.num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
+};
+
 static int __init mxc_init_extuart(void)
 {
 	return platform_device_register(&serial_device);
 }
 
+static void __init mxc_init_ext_ethernet(void)
+{
+	platform_device_register_full(
+		(struct platform_device_info *)&mx31ads_cs8900_devinfo);
+}
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -492,12 +517,15 @@ static void __init mxc_init_audio(void)
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
-/* static mappings */
+/*
+ * Static mappings, starting from the CS4 start address up to the start address
+ * of the CS8900.
+ */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
 		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= MX31_CS4_SIZE / 2,
+		.length		= CS4_CS8900_MMIO_START,
 		.type		= MT_DEVICE
 	},
 };
@@ -522,6 +550,7 @@ static void __init mx31ads_init(void)
 	mxc_init_imx_uart();
 	mxc_init_i2c();
 	mxc_init_audio();
+	mxc_init_ext_ethernet();
 }
 
 static void __init mx31ads_timer_init(void)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 94b60dd47137..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/*
- * These symbols are used by drivers/net/cs89x0.c.
- * This is ugly as hell, but we have to provide them until
- * someone fixed the driver.
- */
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */