[PATCH] powerpc: Unify udbg (#2)

This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

22 files changed, 514 insertions, 639 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 39ca7b9da369..0e4617104f8c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -50,7 +50,7 @@ config PPC
 
 config EARLY_PRINTK
 	bool
-	default y if PPC64
+	default y
 
 config COMPAT
 	bool
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf3fd6f02249..89714929f444 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -18,7 +18,7 @@ obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   signal_64.o ptrace32.o systbl.o \
 				   paca.o ioctl32.o cpu_setup_power4.o \
-				   firmware.o sysfs.o udbg.o idle_64.o
+				   firmware.o sysfs.o idle_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_POWER4)		+= idle_power4.o
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= process.o init_task.o time.o \
-				   prom.o traps.o setup-common.o
+				   prom.o traps.o setup-common.o udbg.o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
 obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_OF)		+= prom_init.o
@@ -56,8 +56,7 @@ obj-$(CONFIG_6xx)		+= idle_6xx.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o
-obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o
-obj64-$(CONFIG_PPC_PMAC)	+= udbg_scc.o
+obj-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o
 module-$(CONFIG_PPC64)		+= module_64.o
 obj-$(CONFIG_MODULES)		+= $(module-y)
 
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index bdfba92b2b38..893dd24a9f67 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
 static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
 static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
 
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
+#define __force_data __attribute__((__section__(".data")))
 
-static int dispDeviceRowBytes;
-static int dispDeviceDepth;
-static int dispDeviceRect[4];
-static unsigned char *dispDeviceBase, *logicalDisplayBase;
+static int g_loc_X __force_data;
+static int g_loc_Y __force_data;
+static int g_max_loc_X __force_data;
+static int g_max_loc_Y __force_data;
+
+static int dispDeviceRowBytes __force_data;
+static int dispDeviceDepth  __force_data;
+static int dispDeviceRect[4] __force_data;
+static unsigned char *dispDeviceBase __force_data;
+static unsigned char *logicalDisplayBase __force_data;
 
 unsigned long disp_BAT[2] __initdata = {0, 0};
 
@@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0};
 
 static unsigned char vga_font[cmapsz];
 
-int boot_text_mapped;
+int boot_text_mapped __force_data = 0;
 int force_printk_to_btext = 0;
 
 #ifdef CONFIG_PPC32
@@ -66,8 +69,7 @@ int force_printk_to_btext = 0;
  * is really badly aligned, but I didn't encounter this case
  * yet.
  */
-void __init
-btext_prepare_BAT(void)
+void __init btext_prepare_BAT(void)
 {
 	unsigned long vaddr = KERNELBASE + 0x10000000;
 	unsigned long addr;
@@ -95,12 +97,13 @@ btext_prepare_BAT(void)
 }
 #endif
 
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
+
+/* This function can be used to enable the early boot text when doing
+ * OF booting or within bootx init. It must be followed by a btext_unmap()
+ * call before the logical address becomes unuseable
  */
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
-		    unsigned long address)
+void __init btext_setup_display(int width, int height, int depth, int pitch,
+				unsigned long address)
 {
 	g_loc_X = 0;
 	g_loc_Y = 0;
@@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch,
 	boot_text_mapped = 1;
 }
 
+void __init btext_unmap(void)
+{
+	boot_text_mapped = 0;
+}
+
 /* Here's a small text engine to use during early boot
  * or for debugging purposes
  *
@@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch,
  *    changes.
  */
 
-void map_boot_text(void)
+static void map_boot_text(void)
 {
 	unsigned long base, offset, size;
 	unsigned char *vbase;
@@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np)
 	if (prop)
 		address = *prop;
 
-	/* FIXME: Add support for PCI reg properties */
-
+	/* FIXME: Add support for PCI reg properties. Right now, only
+	 * reliable on macs
+	 */
 	if (address == 0)
 		return -EINVAL;
 
@@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np)
 	g_loc_Y = 0;
 	g_max_loc_X = width / 8;
 	g_max_loc_Y = height / 16;
-	logicalDisplayBase = (unsigned char *)address;
 	dispDeviceBase = (unsigned char *)address;
 	dispDeviceRowBytes = pitch;
 	dispDeviceDepth = depth;
@@ -197,7 +205,7 @@ int btext_initialize(struct device_node *np)
 	return 0;
 }
 
-void __init init_boot_display(void)
+int __init btext_find_display(int allow_nonstdout)
 {
 	char *name;
 	struct device_node *np = NULL; 
@@ -218,8 +226,8 @@ void __init init_boot_display(void)
 	}
 	if (np)
 		rc = btext_initialize(np);
-	if (rc == 0)
-		return;
+	if (rc == 0 || !allow_nonstdout)
+		return rc;
 
 	for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
 		if (get_property(np, "linux,opened", NULL)) {
@@ -228,8 +236,9 @@ void __init init_boot_display(void)
 			printk("result: %d\n", rc);
 		}
 		if (rc == 0)
-			return;
+			break;
 	}
+	return rc;
 }
 
 /* Calc the base address of a given point (x,y) */
@@ -277,44 +286,83 @@ EXPORT_SYMBOL(btext_update_display);
 
 void btext_clearscreen(void)
 {
-	unsigned long *base	= (unsigned long *)calc_base(0, 0);
+	unsigned int *base	= (unsigned int *)calc_base(0, 0);
 	unsigned long width 	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
-					(dispDeviceDepth >> 3)) >> 3;
+					(dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
 	{
-		unsigned long *ptr = base;
+		unsigned int *ptr = base;
 		for(j=width; j; --j)
 			*(ptr++) = 0;
-		base += (dispDeviceRowBytes >> 3);
+		base += (dispDeviceRowBytes >> 2);
+	}
+}
+
+void btext_flushscreen(void)
+{
+	unsigned int *base	= (unsigned int *)calc_base(0, 0);
+	unsigned long width 	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+					(dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++)
+	{
+		unsigned int *ptr = base;
+		for(j = width; j > 0; j -= 8) {
+			__asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+			ptr += 8;
+		}
+		base += (dispDeviceRowBytes >> 2);
 	}
+	__asm__ __volatile__ ("sync" ::: "memory");
 }
 
+void btext_flushline(void)
+{
+	unsigned int *base	= (unsigned int *)calc_base(0, g_loc_Y << 4);
+	unsigned long width 	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+					(dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i < 16; i++)
+	{
+		unsigned int *ptr = base;
+		for(j = width; j > 0; j -= 8) {
+			__asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr));
+			ptr += 8;
+		}
+		base += (dispDeviceRowBytes >> 2);
+	}
+	__asm__ __volatile__ ("sync" ::: "memory");
+}
+
+
 #ifndef NO_SCROLL
 static void scrollscreen(void)
 {
-	unsigned long *src     	= (unsigned long *)calc_base(0,16);
-	unsigned long *dst     	= (unsigned long *)calc_base(0,0);
+	unsigned int *src     	= (unsigned int *)calc_base(0,16);
+	unsigned int *dst     	= (unsigned int *)calc_base(0,0);
 	unsigned long width    	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
-				   (dispDeviceDepth >> 3)) >> 3;
+				   (dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
 	{
-		unsigned long *src_ptr = src;
-		unsigned long *dst_ptr = dst;
+		unsigned int *src_ptr = src;
+		unsigned int *dst_ptr = dst;
 		for(j=width; j; --j)
 			*(dst_ptr++) = *(src_ptr++);
-		src += (dispDeviceRowBytes >> 3);
-		dst += (dispDeviceRowBytes >> 3);
+		src += (dispDeviceRowBytes >> 2);
+		dst += (dispDeviceRowBytes >> 2);
 	}
 	for (i=0; i<16; i++)
 	{
-		unsigned long *dst_ptr = dst;
+		unsigned int *dst_ptr = dst;
 		for(j=width; j; --j)
 			*(dst_ptr++) = 0;
-		dst += (dispDeviceRowBytes >> 3);
+		dst += (dispDeviceRowBytes >> 2);
 	}
 }
 #endif /* ndef NO_SCROLL */
@@ -377,6 +425,14 @@ void btext_drawstring(const char *c)
 		btext_drawchar(*c++);
 }
 
+void btext_drawtext(const char *c, unsigned int len)
+{
+	if (!boot_text_mapped)
+		return;
+	while (len--)
+		btext_drawchar(*c++);
+}
+
 void btext_drawhex(unsigned long v)
 {
 	char *hex_table = "0123456789abcdef";
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ccdf94731e30..fdd34dbd8797 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -153,6 +153,9 @@ __after_mmu_off:
 	bl	flush_tlbs
 
 	bl	initial_bats
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+	bl	setup_disp_bat
+#endif
 
 /*
  * Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1306,6 +1309,32 @@ initial_bats:
 	blr
 
 
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+setup_disp_bat:
+	/*
+	 * setup the display bat prepared for us in prom.c
+	 */
+	mflr	r8
+	bl	reloc_offset
+	mtlr	r8
+	addis	r8,r3,disp_BAT@ha
+	addi	r8,r8,disp_BAT@l
+	cmpwi	cr0,r8,0
+	beqlr
+	lwz	r11,0(r8)
+	lwz	r8,4(r8)
+	mfspr	r9,SPRN_PVR
+	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
+	cmpwi	0,r9,1
+	beq	1f
+	mtspr	SPRN_DBAT3L,r8
+	mtspr	SPRN_DBAT3U,r11
+	blr
+1:	mtspr	SPRN_IBAT3L,r8
+	mtspr	SPRN_IBAT3U,r11
+	blr
+#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+
 #ifdef CONFIG_8260
 /* Jump into the system reset for the rom.
  * We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 02baacf04366..79d434fc14d2 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -40,6 +40,7 @@
 #include <asm/xmon.h>
 #include <asm/time.h>
 #include <asm/serial.h>
+#include <asm/udbg.h>
 
 #include "setup.h"
 
@@ -173,12 +174,23 @@ void __init platform_init(void)
  */
 void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 {
+	/* If btext is enabled, we might have a BAT setup for early display,
+	 * thus we do enable some very basic udbg output
+	 */
+#ifdef CONFIG_BOOTX_TEXT
+	udbg_putc = btext_drawchar;
+#endif
+
+	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(__va(dt_ptr));
 
+	/* Check default command line */
 #ifdef CONFIG_CMDLINE
-	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
+	if (cmd_line[0] == 0)
+		strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
 #endif /* CONFIG_CMDLINE */
 
+	/* Base init based on machine type */
 	platform_init();
 
 #ifdef CONFIG_6xx
@@ -294,21 +306,11 @@ void __init setup_arch(char **cmdline_p)
 
 	smp_setup_cpu_maps();
 
-#ifdef CONFIG_BOOTX_TEXT
-	init_boot_display();
-#endif
-
-#ifdef CONFIG_PPC_PMAC
-	/* This could be called "early setup arch", it must be done
-	 * now because xmon need it
-	 */
-	if (_machine == _MACH_Pmac)
-		pmac_feature_init();	/* New cool way */
-#endif
-
 #ifdef CONFIG_XMON_DEFAULT
 	xmon_init(1);
 #endif
+	/* Register early console */
+	register_early_udbg_console();
 
 #if defined(CONFIG_KGDB)
 	if (ppc_md.kgdb_map_scc)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0fc442ad1d26..65603e9af984 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -474,10 +474,6 @@ void __init setup_system(void)
 	 */
 	finish_device_tree();
 
-#ifdef CONFIG_BOOTX_TEXT
-	init_boot_display();
-#endif
-
 	/*
 	 * Initialize xmon
 	 */
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 2e372477d22a..cc2df5e61bb0 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -16,8 +16,8 @@
 #include <linux/console.h>
 #include <asm/processor.h>
 
-void (*udbg_putc)(unsigned char c);
-unsigned char (*udbg_getc)(void);
+void (*udbg_putc)(char c);
+char (*udbg_getc)(void);
 int (*udbg_getc_poll)(void);
 
 /* udbg library, used by xmon et al */
@@ -78,7 +78,7 @@ int udbg_read(char *buf, int buflen)
 #define UDBG_BUFSIZE 256
 void udbg_printf(const char *fmt, ...)
 {
-	unsigned char buf[UDBG_BUFSIZE];
+	char buf[UDBG_BUFSIZE];
 	va_list args;
 
 	va_start(args, fmt);
@@ -116,6 +116,8 @@ void __init disable_early_printk(void)
 /* called by setup_system */
 void register_early_udbg_console(void)
 {
+	if (early_console_initialized)
+		return;
 	early_console_initialized = 1;
 	register_console(&udbg_console);
 }
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 50fd376446c9..28a58da5592c 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -47,7 +47,7 @@ struct NS16550 {
 
 static volatile struct NS16550 __iomem *udbg_comport;
 
-static void udbg_550_putc(unsigned char c)
+static void udbg_550_putc(char c)
 {
 	if (udbg_comport) {
 		while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
@@ -69,7 +69,7 @@ static int udbg_550_getc_poll(void)
 	return -1;
 }
 
-static unsigned char udbg_550_getc(void)
+static char udbg_550_getc(void)
 {
 	if (udbg_comport) {
 		while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 7d4b8b5f0606..7d0d75c11848 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -188,6 +188,11 @@ void __init MMU_init(void)
 
 	if (ppc_md.progress)
 		ppc_md.progress("MMU:exit", 0x211);
+
+	/* From now on, btext is no longer BAT mapped if it was at all */
+#ifdef CONFIG_BOOTX_TEXT
+	btext_unmap();
+#endif
 }
 
 /* This is only called until mem_init is done. */
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index c9df44fcf571..3e5370eeb1b7 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_NVRAM)		+= nvram.o
 # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
 obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_PPC_MERGE)		+= udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index f6e22da2a5da..52a9d0c1b8b8 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2607,6 +2607,8 @@ found:
  */
 static void __init probe_uninorth(void)
 {
+	u32 *addrp;
+	phys_addr_t address;
 	unsigned long actrl;
 
 	/* Locate core99 Uni-N */
@@ -2616,20 +2618,23 @@ static void __init probe_uninorth(void)
 		uninorth_node = of_find_node_by_name(NULL, "u3");
 		uninorth_u3 = 1;
 	}
-	if (uninorth_node && uninorth_node->n_addrs > 0) {
-		unsigned long address = uninorth_node->addrs[0].address;
-		uninorth_base = ioremap(address, 0x40000);
-		uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
-		if (uninorth_u3)
-			u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
-	} else
-		uninorth_node = NULL;
-
-	if (!uninorth_node)
+	if (uninorth_node == NULL)
 		return;
 
-	printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
-	       uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
+	addrp = (u32 *)get_property(uninorth_node, "reg", NULL);
+	if (addrp == NULL)
+		return;
+	address = of_translate_address(uninorth_node, addrp);
+	if (address == 0)
+		return;
+	uninorth_base = ioremap(address, 0x40000);
+	uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+	if (uninorth_u3)
+		u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+
+	printk(KERN_INFO "Found %s memory controller & host bridge,"
+	       " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth",
+	       uninorth_rev);
 	printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
 
 	/* Set the arbitrer QAck delay according to what Apple does
@@ -2653,18 +2658,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 {
 	struct device_node*	node;
 	int			i;
-	volatile u32 __iomem *	base;
-	u32*			revp;
+	volatile u32 __iomem	*base;
+	u32			*addrp, *revp;
+	phys_addr_t		addr;
+	u64			size;
 
-	node = find_devices(name);
-	if (!node || !node->n_addrs)
-		return;
-	if (compat)
-		do {
-			if (device_is_compatible(node, compat))
-				break;
-			node = node->next;
-		} while (node);
+	for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
+		if (!compat)
+			break;
+		if (device_is_compatible(node, compat))
+			break;
+	}
 	if (!node)
 		return;
 	for(i=0; i<MAX_MACIO_CHIPS; i++) {
@@ -2673,14 +2677,28 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 		if (macio_chips[i].of_node == node)
 			return;
 	}
+
 	if (i >= MAX_MACIO_CHIPS) {
 		printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
 		printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
 		return;
 	}
-	base = ioremap(node->addrs[0].address, node->addrs[0].size);
+	addrp = of_get_pci_address(node, 0, &size);
+	if (addrp == NULL) {
+		printk(KERN_ERR "pmac_feature: %s: can't find base !\n",
+		       node->full_name);
+		return;
+	}
+	addr = of_translate_address(node, addrp);
+	if (addr == 0) {
+		printk(KERN_ERR "pmac_feature: %s, can't translate base !\n",
+		       node->full_name);
+		return;
+	}
+	base = ioremap(addr, (unsigned long)size);
 	if (!base) {
-		printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+		printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n",
+		       node->full_name);
 		return;
 	}
 	if (type == macio_keylargo) {
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f3f39e8e337a..606e0ed13731 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -36,7 +36,7 @@
 
 #ifdef DEBUG
 #define DBG(x...) do {\
-		printk(KERN_DEBUG "KW:" x);	\
+		printk(KERN_DEBUG "low_i2c:" x);	\
 	} while(0)
 #else
 #define DBG(x...)
@@ -342,7 +342,7 @@ static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr,
 static void keywest_low_i2c_add(struct device_node *np)
 {
 	struct low_i2c_host	*host = find_low_i2c_host(NULL);
-	u32			*psteps, *prate, steps, aoffset = 0;
+	u32			*psteps, *prate, *addrp, steps;
 	struct device_node	*parent;
 
 	if (host == NULL) {
@@ -352,6 +352,16 @@ static void keywest_low_i2c_add(struct device_node *np)
 	}
 	memset(host, 0, sizeof(*host));
 
+	/* Apple is kind enough to provide a valid AAPL,address property
+	 * on all i2c keywest nodes so far ... we would have to fallback
+	 * to macio parsing if that wasn't the case
+	 */
+	addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+	if (addrp == NULL) {
+		printk(KERN_ERR "low_i2c: Can't find address for %s\n",
+		       np->full_name);
+		return;
+	}
 	init_MUTEX(&host->mutex);
 	host->np = of_node_get(np);	
 	psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
@@ -360,12 +370,10 @@ static void keywest_low_i2c_add(struct device_node *np)
 		steps >>= 1;
 	parent = of_get_parent(np);
 	host->num_channels = 1;
-	if (parent && parent->name[0] == 'u') {
+	if (parent && parent->name[0] == 'u')
 		host->num_channels = 2;
-		aoffset = 3;
-	}
 	/* Select interface rate */
-	host->speed = KW_I2C_MODE_100KHZ;
+	host->speed = KW_I2C_MODE_25KHZ;
 	prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
 	if (prate) switch(*prate) {
 	case 100:
@@ -379,9 +387,12 @@ static void keywest_low_i2c_add(struct device_node *np)
 		break;
 	}	
 
+	printk(KERN_INFO "low_i2c: Bus %s found at 0x%08x, %d channels,"
+	       " speed = %d KHz\n",
+	       np->full_name, *addrp, host->num_channels, prate ? *prate : 25);
+
 	host->mode = pmac_low_i2c_mode_std;
-	host->base = ioremap(np->addrs[0].address + aoffset,
-						np->addrs[0].size);
+	host->base = ioremap((*addrp), 0x1000);
 	host->func = keywest_low_i2c_func;
 }
 
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 90040c49494d..ff78eeac10f2 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -459,7 +459,7 @@ void __init pmac_pic_init(void)
 			mpic_setup_cascade(irqctrler2->intrs[0].line,
 					   pmac_u3_cascade, mpic2);
 		}
-#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+#ifdef CONFIG_XMON
 		{
 			struct device_node* pswitch;
 			int nmi_irq;
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 3b7a492d9b68..6ee620fe5195 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -77,6 +77,7 @@
 #include <asm/pmc.h>
 #include <asm/mpic.h>
 #include <asm/lmb.h>
+#include <asm/udbg.h>
 
 #include "pmac.h"
 
@@ -322,16 +323,6 @@ void __init pmac_setup_arch(void)
 	l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_PPC64
-	/* Probe motherboard chipset */
-	/* this is done earlier in setup_arch for 32-bit */
-	pmac_feature_init();
-
-	/* We can NAP */
-	powersave_nap = 1;
-	printk(KERN_INFO "Using native/NAP idle loop\n");
-#endif
-
 #ifdef CONFIG_KGDB
 	zs_kgdb_hook(0);
 #endif
@@ -622,13 +613,26 @@ static void __init pmac_init_early(void)
 	 * and call ioremap
 	 */
 	hpte_init_native();
+#endif
 
-	/* Init SCC */
-	if (strstr(cmd_line, "sccdbg")) {
-		sccdbg = 1;
-		udbg_init_scc(NULL);
+	/* Enable early btext debug if requested */
+	if (strstr(cmd_line, "btextdbg")) {
+		udbg_adb_init_early();
+		register_early_udbg_console();
 	}
 
+	/* Probe motherboard chipset */
+	pmac_feature_init();
+
+	/* We can NAP */
+	powersave_nap = 1;
+	printk(KERN_INFO "Using native/NAP idle loop\n");
+
+	/* Initialize debug stuff */
+	udbg_scc_init(!!strstr(cmd_line, "sccdbg"));
+	udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
+
+#ifdef CONFIG_PPC64
 	/* Setup interrupt mapping options */
 	ppc64_interrupt_controller = IC_OPEN_PIC;
 
@@ -638,19 +642,8 @@ static void __init pmac_init_early(void)
 
 static void __init pmac_progress(char *s, unsigned short hex)
 {
-#ifdef CONFIG_PPC64
-	if (sccdbg) {
-		udbg_puts(s);
-		udbg_puts("\n");
-		return;
-	}
-#endif
-#ifdef CONFIG_BOOTX_TEXT
-	if (boot_text_mapped) {
-		btext_drawstring(s);
-		btext_drawchar('\n');
-	}
-#endif /* CONFIG_BOOTX_TEXT */
+	udbg_puts(s);
+	udbg_puts("\n");
 }
 
 /*
@@ -735,7 +728,8 @@ static int __init pmac_probe(int platform)
 }
 
 #ifdef CONFIG_PPC64
-static int pmac_probe_mode(struct pci_bus *bus)
+/* Move that to pci.c */
+static int pmac_pci_probe_mode(struct pci_bus *bus)
 {
 	struct device_node *node = bus->sysdata;
 
@@ -771,7 +765,7 @@ struct machdep_calls __initdata pmac_md = {
 	.check_legacy_ioport	= pmac_check_legacy_ioport,
 	.progress		= pmac_progress,
 #ifdef CONFIG_PPC64
-	.pci_probe_mode		= pmac_probe_mode,
+	.pci_probe_mode		= pmac_pci_probe_mode,
 	.idle_loop		= native_idle,
 	.enable_pmcs		= power4_enable_pmcs,
 #ifdef CONFIG_KEXEC
diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c
new file mode 100644
index 000000000000..e51de55b2d6e
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/udbg_adb.c
@@ -0,0 +1,218 @@
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/xmon.h>
+#include <asm/prom.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/errno.h>
+#include <asm/pmac_feature.h>
+#include <asm/processor.h>
+#include <asm/delay.h>
+#include <asm/btext.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+/*
+ * This implementation is "special", it can "patch" the current
+ * udbg implementation and work on top of it. It must thus be
+ * initialized last
+ */
+
+static void (*udbg_adb_old_putc)(char c);
+static char (*udbg_adb_old_getc)(void);
+static int (*udbg_adb_old_getc_poll)(void);
+
+static enum {
+	input_adb_none,
+	input_adb_pmu,
+	input_adb_cuda,
+} input_type = input_adb_none;
+
+static int udbg_adb_use_btext;
+
+int xmon_wants_key, xmon_adb_keycode;
+
+static inline void udbg_adb_poll(void)
+{
+#ifdef CONFIG_ADB_PMU
+	if (input_type == input_adb_pmu)
+		pmu_poll_adb();
+#endif /* CONFIG_ADB_PMU */
+#ifdef CONFIG_ADB_CUDA
+	if (input_type == input_adb_cuda)
+		cuda_poll();
+#endif /* CONFIG_ADB_CUDA */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+static int xmon_adb_shiftstate;
+
+static unsigned char xmon_keytab[128] =
+	"asdfhgzxcv\000bqwer"				/* 0x00 - 0x0f */
+	"yt123465=97-80]o"				/* 0x10 - 0x1f */
+	"u[ip\rlj'k;\\,/nm."				/* 0x20 - 0x2f */
+	"\t `\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
+	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
+	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
+
+static unsigned char xmon_shift_keytab[128] =
+	"ASDFHGZXCV\000BQWER"				/* 0x00 - 0x0f */
+	"YT!@#$^%+(&_*)}O"				/* 0x10 - 0x1f */
+	"U{IP\rLJ\"K:|<?NM>"				/* 0x20 - 0x2f */
+	"\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
+	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
+	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
+
+static char udbg_adb_local_getc(void)
+{
+	int k, t, on;
+
+	xmon_wants_key = 1;
+	for (;;) {
+		xmon_adb_keycode = -1;
+		t = 0;
+		on = 0;
+		k = -1;
+		do {
+			if (--t < 0) {
+				on = 1 - on;
+				btext_drawchar(on? 0xdb: 0x20);
+				btext_drawchar('\b');
+				t = 200000;
+			}
+			udbg_adb_poll();
+			if (udbg_adb_old_getc_poll)
+				k = udbg_adb_old_getc_poll();
+		} while (k == -1 && xmon_adb_keycode == -1);
+		if (on)
+			btext_drawstring(" \b");
+		if (k != -1)
+			return k;
+		k = xmon_adb_keycode;
+
+		/* test for shift keys */
+		if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
+			xmon_adb_shiftstate = (k & 0x80) == 0;
+			continue;
+		}
+		if (k >= 0x80)
+			continue;	/* ignore up transitions */
+		k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
+		if (k != 0)
+			break;
+	}
+	xmon_wants_key = 0;
+	return k;
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+static char udbg_adb_getc(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	if (udbg_adb_use_btext && input_type != input_adb_none)
+		return udbg_adb_local_getc();
+#endif
+	if (udbg_adb_old_getc)
+		return udbg_adb_old_getc();
+	return -1;
+}
+
+/* getc_poll() is not really used, unless you have the xmon-over modem
+ * hack that doesn't quite concern us here, thus we just poll the low level
+ * ADB driver to prevent it from timing out and call back the original poll
+ * routine.
+ */
+static int udbg_adb_getc_poll(void)
+{
+	udbg_adb_poll();
+
+	if (udbg_adb_old_getc_poll)
+		return udbg_adb_old_getc_poll();
+	return -1;
+}
+
+static void udbg_adb_putc(char c)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	if (udbg_adb_use_btext)
+		btext_drawchar(c);
+#endif
+	if (udbg_adb_old_putc)
+		return udbg_adb_old_putc(c);
+}
+
+void udbg_adb_init_early(void)
+{
+#ifdef CONFIG_BOOTX_TEXT
+	if (btext_find_display(1) == 0) {
+		udbg_adb_use_btext = 1;
+		udbg_putc = udbg_adb_putc;
+	}
+#endif
+}
+
+int udbg_adb_init(int force_btext)
+{
+	struct device_node *np;
+
+	/* Capture existing callbacks */
+	udbg_adb_old_putc = udbg_putc;
+	udbg_adb_old_getc = udbg_getc;
+	udbg_adb_old_getc_poll = udbg_getc_poll;
+
+	/* Check if our early init was already called */
+	if (udbg_adb_old_putc == udbg_adb_putc ||
+	    udbg_adb_old_putc == btext_drawchar)
+		udbg_adb_old_putc = NULL;
+
+	/* Set ours as output */
+	udbg_putc = udbg_adb_putc;
+	udbg_getc = udbg_adb_getc;
+	udbg_getc_poll = udbg_adb_getc_poll;
+
+#ifdef CONFIG_BOOTX_TEXT
+	/* Check if we should use btext output */
+	if (btext_find_display(force_btext) == 0)
+		udbg_adb_use_btext = 1;
+#endif
+
+	/* See if there is a keyboard in the device tree with a parent
+	 * of type "adb". If not, we return a failure, but we keep the
+	 * bext output set for now
+	 */
+	for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) {
+		struct device_node *parent = of_get_parent(np);
+		int found = (parent && !strcmp(parent->type, "adb") == 0);
+		of_node_put(parent);
+		if (found)
+			break;
+	}
+	if (np == NULL)
+		return -ENODEV;
+	of_node_put(np);
+
+#ifdef CONFIG_ADB_PMU
+	if (find_via_pmu())
+		input_type = input_adb_pmu;
+#endif
+#ifdef CONFIG_ADB_CUDA
+	if (find_via_cuda())
+		input_type = input_adb_cuda;
+#endif
+
+	/* Same as above: nothing found, keep btext set for output */
+	if (input_type == input_adb_none)
+		return -ENODEV;
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 820c53551507..df6dec49c4c7 100644
--- a/arch/powerpc/kernel/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -25,7 +25,7 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr);
 static volatile u8 __iomem *sccc;
 static volatile u8 __iomem *sccd;
 
-static void udbg_scc_putc(unsigned char c)
+static void udbg_scc_putc(char c)
 {
 	if (sccc) {
 		while ((in_8(sccc) & SCC_TXRDY) == 0)
@@ -47,7 +47,7 @@ static int udbg_scc_getc_poll(void)
 	return -1;
 }
 
-static unsigned char udbg_scc_getc(void)
+static char udbg_scc_getc(void)
 {
 	if (sccc) {
 		while ((in_8(sccc) & SCC_RXRDY) == 0)
@@ -67,38 +67,59 @@ static unsigned char scc_inittab[] = {
     3,  0xc1,		/* rx enable, 8 bits */
 };
 
-void udbg_init_scc(struct device_node *np)
+void udbg_scc_init(int force_scc)
 {
 	u32 *reg;
 	unsigned long addr;
+	struct device_node *stdout = NULL, *escc = NULL, *macio = NULL;
+	struct device_node *ch, *ch_def = NULL, *ch_a = NULL;
+	char *path;
 	int i, x;
 
-	if (np == NULL)
-		np = of_find_node_by_name(NULL, "escc");
-	if (np == NULL || np->parent == NULL)
-		return;
+	escc = of_find_node_by_name(NULL, "escc");
+	if (escc == NULL)
+		goto bail;
+	macio = of_get_parent(escc);
+	if (macio == NULL)
+		goto bail;
+	path = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
+	if (path != NULL)
+		stdout = of_find_node_by_path(path);
+	for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
+		if (ch == stdout)
+			ch_def = of_node_get(ch);
+		if (strcmp(ch->name, "ch-a") == 0)
+			ch_a = of_node_get(ch);
+	}
+	if (ch_def == NULL && !force_scc)
+		goto bail;
+
+	ch = ch_def ? ch_def : ch_a;
 
-	udbg_printf("found SCC...\n");
 	/* Get address within mac-io ASIC */
-	reg = (u32 *)get_property(np, "reg", NULL);
+	reg = (u32 *)get_property(escc, "reg", NULL);
 	if (reg == NULL)
-		return;
+		goto bail;
 	addr = reg[0];
-	udbg_printf("local addr: %lx\n", addr);
+
 	/* Get address of mac-io PCI itself */
-	reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL);
+	reg = (u32 *)get_property(macio, "assigned-addresses", NULL);
 	if (reg == NULL)
-		return;
+		goto bail;
 	addr += reg[2];
-	udbg_printf("final addr: %lx\n", addr);
+
+	/* Lock the serial port */
+	pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch,
+			  PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
+
 
 	/* Setup for 57600 8N1 */
-	addr += 0x20;
+	if (ch == ch_a)
+		addr += 0x20;
 	sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ;
 	sccc += addr & ~PAGE_MASK;
 	sccd = sccc + 0x10;
 
-	udbg_printf("ioremap result sccc: %p\n", sccc);
 	mb();
 
 	for (i = 20000; i != 0; --i)
@@ -113,9 +134,17 @@ void udbg_init_scc(struct device_node *np)
 	udbg_getc_poll = udbg_scc_getc_poll;
 
 	udbg_puts("Hello World !\n");
+
+ bail:
+	of_node_put(macio);
+	of_node_put(escc);
+	of_node_put(stdout);
+	of_node_put(ch_def);
+	of_node_put(ch_a);
 }
 
-static void udbg_real_scc_putc(unsigned char c)
+#ifdef CONFIG_PPC64
+static void udbg_real_scc_putc(char c)
 {
 	while ((real_readb(sccc) & SCC_TXRDY) == 0)
 		;
@@ -133,3 +162,4 @@ void udbg_init_pmac_realmode(void)
 	udbg_getc = NULL;
 	udbg_getc_poll = NULL;
 }
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index cc0939d4cad1..615ffb961059 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -61,7 +61,7 @@ extern void pSeries_find_serial_port(void);
 int vtermno;	/* virtual terminal# for udbg  */
 
 #define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
-static void udbg_hvsi_putc(unsigned char c)
+static void udbg_hvsi_putc(char c)
 {
 	/* packet's seqno isn't used anyways */
 	uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c };
@@ -112,7 +112,7 @@ static int udbg_hvsi_getc_poll(void)
 	return ch;
 }
 
-static unsigned char udbg_hvsi_getc(void)
+static char udbg_hvsi_getc(void)
 {
 	int ch;
 	for (;;) {
@@ -128,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void)
 	}
 }
 
-static void udbg_putcLP(unsigned char c)
+static void udbg_putcLP(char c)
 {
 	char buf[16];
 	unsigned long rc;
@@ -173,7 +173,7 @@ static int udbg_getc_pollLP(void)
 	return ch;
 }
 
-static unsigned char udbg_getcLP(void)
+static char udbg_getcLP(void)
 {
 	int ch;
 	for (;;) {
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index b20312e5ed27..109d874ecfbe 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -3,9 +3,5 @@
 ifdef CONFIG_PPC64
 EXTRA_CFLAGS += -mno-minimal-toc
 endif
-
-obj-$(CONFIG_8xx)	+= start_8xx.o
-obj-$(CONFIG_6xx)	+= start_32.o
-obj-$(CONFIG_4xx)	+= start_32.o
-obj-$(CONFIG_PPC64)	+= start_64.o
-obj-y			+= xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o
+obj-y			+= xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \
+			   nonstdio.o
diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start.c
index 712552c4f242..712552c4f242 100644
--- a/arch/powerpc/xmon/start_64.c
+++ b/arch/powerpc/xmon/start.c
diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c
deleted file mode 100644
index c2464df4217e..000000000000
--- a/arch/powerpc/xmon/start_32.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/config.h>
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cuda.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/prom.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/errno.h>
-#include <asm/pmac_feature.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/time.h>
-#include "nonstdio.h"
-
-static volatile unsigned char __iomem *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-
-static int use_serial;
-static int use_screen;
-static int via_modem;
-static int xmon_use_sccb;
-static struct device_node *channel_node;
-
-void buf_access(void)
-{
-	if (DLAB)
-		sccd[3] &= ~DLAB;	/* reset DLAB */
-}
-
-extern int adb_init(void);
-
-#ifdef CONFIG_PPC_CHRP
-/*
- * This looks in the "ranges" property for the primary PCI host bridge
- * to find the physical address of the start of PCI/ISA I/O space.
- * It is basically a cut-down version of pci_process_bridge_OF_ranges.
- */
-static unsigned long chrp_find_phys_io_base(void)
-{
-	struct device_node *node;
-	unsigned int *ranges;
-	unsigned long base = CHRP_ISA_IO_BASE;
-	int rlen = 0;
-	int np;
-
-	node = find_devices("isa");
-	if (node != NULL) {
-		node = node->parent;
-		if (node == NULL || node->type == NULL
-		    || strcmp(node->type, "pci") != 0)
-			node = NULL;
-	}
-	if (node == NULL)
-		node = find_devices("pci");
-	if (node == NULL)
-		return base;
-
-	ranges = (unsigned int *) get_property(node, "ranges", &rlen);
-	np = prom_n_addr_cells(node) + 5;
-	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-		if ((ranges[0] >> 24) == 1 && ranges[2] == 0) {
-			/* I/O space starting at 0, grab the phys base */
-			base = ranges[np - 3];
-			break;
-		}
-		ranges += np;
-	}
-	return base;
-}
-#endif /* CONFIG_PPC_CHRP */
-
-void xmon_map_scc(void)
-{
-#ifdef CONFIG_PPC_MULTIPLATFORM
-	volatile unsigned char __iomem *base;
-
-	if (_machine == _MACH_Pmac) {
-		struct device_node *np;
-		unsigned long addr;
-#ifdef CONFIG_BOOTX_TEXT
-		if (!use_screen && !use_serial
-		    && !machine_is_compatible("iMac")) {
-			/* see if there is a keyboard in the device tree
-			   with a parent of type "adb" */
-			for (np = find_devices("keyboard"); np; np = np->next)
-				if (np->parent && np->parent->type
-				    && strcmp(np->parent->type, "adb") == 0)
-					break;
-
-			/* needs to be hacked if xmon_printk is to be used
-			   from within find_via_pmu() */
-#ifdef CONFIG_ADB_PMU
-			if (np != NULL && boot_text_mapped && find_via_pmu())
-				use_screen = 1;
-#endif
-#ifdef CONFIG_ADB_CUDA
-			if (np != NULL && boot_text_mapped && find_via_cuda())
-				use_screen = 1;
-#endif
-		}
-		if (!use_screen && (np = find_devices("escc")) != NULL) {
-			/*
-			 * look for the device node for the serial port
-			 * we're using and see if it says it has a modem
-			 */
-			char *name = xmon_use_sccb? "ch-b": "ch-a";
-			char *slots;
-			int l;
-
-			np = np->child;
-			while (np != NULL && strcmp(np->name, name) != 0)
-				np = np->sibling;
-			if (np != NULL) {
-				/* XXX should parse this properly */
-				channel_node = np;
-				slots = get_property(np, "slot-names", &l);
-				if (slots != NULL && l >= 10
-				    && strcmp(slots+4, "Modem") == 0)
-					via_modem = 1;
-			}
-		}
-		btext_drawstring("xmon uses ");
-		if (use_screen)
-			btext_drawstring("screen and keyboard\n");
-		else {
-			if (via_modem)
-				btext_drawstring("modem on ");
-			btext_drawstring(xmon_use_sccb? "printer": "modem");
-			btext_drawstring(" port\n");
-		}
-
-#endif /* CONFIG_BOOTX_TEXT */
-
-#ifdef CHRP_ESCC
-		addr = 0xc1013020;
-#else
-		addr = 0xf3013020;
-#endif
-		TXRDY = 4;
-		RXRDY = 1;
-	
-		np = find_devices("mac-io");
-		if (np && np->n_addrs)
-			addr = np->addrs[0].address + 0x13020;
-		base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE);
-		sccc = base + (addr & ~PAGE_MASK);
-		sccd = sccc + 0x10;
-
-	} else {
-		base = (volatile unsigned char *) isa_io_base;
-
-#ifdef CONFIG_PPC_CHRP
-		if (_machine == _MACH_chrp)
-			base = (volatile unsigned char __iomem *)
-				ioremap(chrp_find_phys_io_base(), 0x1000);
-#endif
-
-		sccc = base + 0x3fd;
-		sccd = base + 0x3f8;
-		if (xmon_use_sccb) {
-			sccc -= 0x100;
-			sccd -= 0x100;
-		}
-		TXRDY = 0x20;
-		RXRDY = 1;
-		DLAB = 0x80;
-	}
-#elif defined(CONFIG_GEMINI)
-	/* should already be mapped by the kernel boot */
-	sccc = (volatile unsigned char __iomem *) 0xffeffb0d;
-	sccd = (volatile unsigned char __iomem *) 0xffeffb08;
-	TXRDY = 0x20;
-	RXRDY = 1;
-	DLAB = 0x80;
-#elif defined(CONFIG_405GP)
-	sccc = (volatile unsigned char __iomem *)0xef600305;
-	sccd = (volatile unsigned char __iomem *)0xef600300;
-	TXRDY = 0x20;
-	RXRDY = 1;
-	DLAB = 0x80;
-#endif /* platform */
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-extern void cuda_poll(void);
-
-static inline void do_poll_adb(void)
-{
-#ifdef CONFIG_ADB_PMU
-	if (sys_ctrler == SYS_CTRLER_PMU)
-		pmu_poll_adb();
-#endif /* CONFIG_ADB_PMU */
-#ifdef CONFIG_ADB_CUDA
-	if (sys_ctrler == SYS_CTRLER_CUDA)
-		cuda_poll();
-#endif /* CONFIG_ADB_CUDA */
-}
-
-int xmon_write(void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-#ifdef CONFIG_SMP
-	static unsigned long xmon_write_lock;
-	int lock_wait = 1000000;
-	int locked;
-
-	while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
-		if (--lock_wait == 0)
-			break;
-#endif
-
-#ifdef CONFIG_BOOTX_TEXT
-	if (use_screen) {
-		/* write it on the screen */
-		for (i = 0; i < nb; ++i)
-			btext_drawchar(*p++);
-		goto out;
-	}
-#endif
-	if (!scc_initialized)
-		xmon_init_scc();
-	ct = 0;
-	for (i = 0; i < nb; ++i) {
-		while ((*sccc & TXRDY) == 0)
-			do_poll_adb();
-		c = p[i];
-		if (c == '\n' && !ct) {
-			c = '\r';
-			ct = 1;
-			--i;
-		} else {
-			ct = 0;
-		}
-		buf_access();
-		*sccd = c;
-		eieio();
-	}
-
- out:
-#ifdef CONFIG_SMP
-	if (!locked)
-		clear_bit(0, &xmon_write_lock);
-#endif
-	return nb;
-}
-
-int xmon_wants_key;
-int xmon_adb_keycode;
-
-#ifdef CONFIG_BOOTX_TEXT
-static int xmon_adb_shiftstate;
-
-static unsigned char xmon_keytab[128] =
-	"asdfhgzxcv\000bqwer"				/* 0x00 - 0x0f */
-	"yt123465=97-80]o"				/* 0x10 - 0x1f */
-	"u[ip\rlj'k;\\,/nm."				/* 0x20 - 0x2f */
-	"\t `\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
-	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
-	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
-
-static unsigned char xmon_shift_keytab[128] =
-	"ASDFHGZXCV\000BQWER"				/* 0x00 - 0x0f */
-	"YT!@#$^%+(&_*)}O"				/* 0x10 - 0x1f */
-	"U{IP\rLJ\"K:|<?NM>"				/* 0x20 - 0x2f */
-	"\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0"		/* 0x30 - 0x3f */
-	"\0.\0*\0+\0\0\0\0\0/\r\0-\0"			/* 0x40 - 0x4f */
-	"\0\0000123456789\0\0\0";			/* 0x50 - 0x5f */
-
-static int xmon_get_adb_key(void)
-{
-	int k, t, on;
-
-	xmon_wants_key = 1;
-	for (;;) {
-		xmon_adb_keycode = -1;
-		t = 0;
-		on = 0;
-		do {
-			if (--t < 0) {
-				on = 1 - on;
-				btext_drawchar(on? 0xdb: 0x20);
-				btext_drawchar('\b');
-				t = 200000;
-			}
-			do_poll_adb();
-		} while (xmon_adb_keycode == -1);
-		k = xmon_adb_keycode;
-		if (on)
-			btext_drawstring(" \b");
-
-		/* test for shift keys */
-		if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) {
-			xmon_adb_shiftstate = (k & 0x80) == 0;
-			continue;
-		}
-		if (k >= 0x80)
-			continue;	/* ignore up transitions */
-		k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k];
-		if (k != 0)
-			break;
-	}
-	xmon_wants_key = 0;
-	return k;
-}
-#endif /* CONFIG_BOOTX_TEXT */
-
-int xmon_readchar(void)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	if (use_screen)
-		return xmon_get_adb_key();
-#endif
-	if (!scc_initialized)
-		xmon_init_scc();
-	while ((*sccc & RXRDY) == 0)
-		do_poll_adb();
-	buf_access();
-	return *sccd;
-}
-
-int xmon_read_poll(void)
-{
-	if ((*sccc & RXRDY) == 0) {
-		do_poll_adb();
-		return -1;
-	}
-	buf_access();
-	return *sccd;
-}
-
-static unsigned char scc_inittab[] = {
-    13, 0,		/* set baud rate divisor */
-    12, 1,
-    14, 1,		/* baud rate gen enable, src=rtxc */
-    11, 0x50,		/* clocks = br gen */
-    5,  0xea,		/* tx 8 bits, assert DTR & RTS */
-    4,  0x46,		/* x16 clock, 1 stop */
-    3,  0xc1,		/* rx enable, 8 bits */
-};
-
-void xmon_init_scc(void)
-{
-	if ( _machine == _MACH_chrp )
-	{
-		sccd[3] = 0x83; eieio();	/* LCR = 8N1 + DLAB */
-		sccd[0] = 12; eieio();		/* DLL = 9600 baud */
-		sccd[1] = 0; eieio();
-		sccd[2] = 0; eieio();		/* FCR = 0 */
-		sccd[3] = 3; eieio();		/* LCR = 8N1 */
-		sccd[1] = 0; eieio();		/* IER = 0 */
-	}
-	else if ( _machine == _MACH_Pmac )
-	{
-		int i, x;
-		unsigned long timeout;
-
-		if (channel_node != 0)
-			pmac_call_feature(
-				PMAC_FTR_SCC_ENABLE,
-				channel_node,
-				PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1);
-			printk(KERN_INFO "Serial port locked ON by debugger !\n");
-		if (via_modem && channel_node != 0) {
-			unsigned int t0;
-
-			pmac_call_feature(
-				PMAC_FTR_MODEM_ENABLE,
-				channel_node, 0, 1);
-			printk(KERN_INFO "Modem powered up by debugger !\n");
-			t0 = get_tbl();
-			timeout = 3 * tb_ticks_per_sec;
-			if (timeout == 0)
-				/* assume 25MHz if tb_ticks_per_sec not set */
-				timeout = 75000000;
-			while (get_tbl() - t0 < timeout)
-				eieio();
-		}
-		/* use the B channel if requested */
-		if (xmon_use_sccb) {
-			sccc = (volatile unsigned char *)
-				((unsigned long)sccc & ~0x20);
-			sccd = sccc + 0x10;
-		}
-		for (i = 20000; i != 0; --i) {
-			x = *sccc; eieio();
-		}
-		*sccc = 9; eieio();		/* reset A or B side */
-		*sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio();
-		for (i = 0; i < sizeof(scc_inittab); ++i) {
-			*sccc = scc_inittab[i];
-			eieio();
-		}
-	}
-	scc_initialized = 1;
-	if (via_modem) {
-		for (;;) {
-			xmon_write("ATE1V1\r", 7);
-			if (xmon_expect("OK", 5)) {
-				xmon_write("ATA\r", 4);
-				if (xmon_expect("CONNECT", 40))
-					break;
-			}
-			xmon_write("+++", 3);
-			xmon_expect("OK", 3);
-		}
-	}
-}
-
-void xmon_enter(void)
-{
-#ifdef CONFIG_ADB_PMU
-	if (_machine == _MACH_Pmac) {
-		pmu_suspend();
-	}
-#endif
-}
-
-void xmon_leave(void)
-{
-#ifdef CONFIG_ADB_PMU
-	if (_machine == _MACH_Pmac) {
-		pmu_resume();
-	}
-#endif
-}
diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c
deleted file mode 100644
index 4c17b0486ad5..000000000000
--- a/arch/powerpc/xmon/start_8xx.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors.  Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-#include "nonstdio.h"
-
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-
-void xmon_map_scc(void)
-{
-	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-}
-
-void xmon_init_scc(void);
-
-int xmon_write(void *ptr, int nb)
-{
-	return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_readchar(void)
-{
-	return xmon_8xx_read_char();
-}
-
-int xmon_read_poll(void)
-{
-	return(xmon_8xx_read_poll());
-}
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 0eb0b7085e6a..e707c6f6e61b 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -744,6 +744,9 @@ void __init setup_arch(char **cmdline_p)
 	/* so udelay does something sensible, assume <= 1000 bogomips */
 	loops_per_jiffy = 500000000 / HZ;
 
+	if (ppc_md.init_early)
+		ppc_md.init_early();
+
 #ifdef CONFIG_PPC_MULTIPLATFORM
 	/* This could be called "early setup arch", it must be done
 	 * now because xmon need it