diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:22 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:22 -0800 |
| commit | 2ac9d7aaccbd598b5bd19ac40761b723bb675442 (patch) | |
| tree | 09132a44e33798aaa5e80f10bf025b510015cab3 /arch | |
| parent | 5ede3ceb7b2c2843e153a1803edbdc8c56655950 (diff) | |
| parent | dcf7ec5ee62a78123057a1e286c88ca739717409 (diff) | |
| download | blackbird-op-linux-2ac9d7aaccbd598b5bd19ac40761b723bb675442.tar.gz blackbird-op-linux-2ac9d7aaccbd598b5bd19ac40761b723bb675442.zip | |
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Driver specific changes
Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: sa1100: clean up of the clock support
ARM: pxa: add dummy clock for sa1100-rtc
RTC: sa1100: support sa1100, pxa and mmp soc families
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: Clean out ost register
Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
ARM: EXYNOS: Modified files for SPI consolidation work
ARM: S5P64X0: Enable SDHCI support
ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
ARM: S5P64X0: Add HSMMC setup for host Controller
ARM: EXYNOS: Add USB OHCI support to ORIGEN board
USB: Add Samsung Exynos OHCI diver
ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
ARM: EXYNOS: Add USB OHCI device
net: macb: fix build break with !CONFIG_OF
i2c: tegra: Support DVC controller in device tree
i2c: tegra: Add __devinit/exit to probe/remove
net/at91_ether: use gpio_is_valid for phy IRQ line
ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
...
Diffstat (limited to 'arch')
137 files changed, 1377 insertions, 878 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3cddfd87c727..b3d7b77d2d51 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -597,6 +597,7 @@ config ARCH_MMP select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS + select GPIO_PXA select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA @@ -682,6 +683,7 @@ config ARCH_PXA select CLKSRC_MMIO select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select GPIO_PXA select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA @@ -749,7 +751,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select HAVE_CLK + select CLKDEV_LOOKUP select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index aeef04269cf8..07603b8c9503 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -114,6 +114,13 @@ atmel,use-dma-tx; status = "disabled"; }; + + macb0: ethernet@fffc4000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffc4000 0x100>; + interrupts = <21>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index db6a45202f26..fffa005300a4 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -101,6 +101,13 @@ atmel,use-dma-tx; status = "disabled"; }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xfffbc000 0x100>; + interrupts = <25>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 85b34f59cd82..a387e7704ce1 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -30,6 +30,11 @@ usart1: serial@fff90000 { status = "okay"; }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index d66e2c00ac35..f04b535477f5 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -25,6 +25,11 @@ dbgu: serial@fffff200 { status = "okay"; }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b4bdf297e9fa..5d602f68a0e8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -89,6 +89,11 @@ config EXYNOS4_DEV_DWMCI help Compile in platform device definitions for DWMCI +config EXYNOS4_DEV_USB_OHCI + bool + help + Compile in platform device definition for USB OHCI + config EXYNOS4_SETUP_I2C1 bool help @@ -150,6 +155,11 @@ config EXYNOS4_SETUP_USB_PHY help Common setup code for USB PHY controller +config EXYNOS4_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations. + # machine support if ARCH_EXYNOS4 @@ -187,6 +197,7 @@ config MACH_SMDKV310 select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD select SAMSUNG_DEV_PWM + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_DEV_SYSMMU select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -300,6 +311,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS4_DEV_DMA select EXYNOS4_DEV_PD + select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index ca85a99c159d..5fc202cdfdb6 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o +obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o @@ -63,3 +64,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_SPI) += setup-spi.o diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5d5250df33fd..5a8c42e90005 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -1112,36 +1112,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.0", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.1", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_spi", - .devname = "s3c64xx-spi.2", - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, - }, { - .clk = { .name = "sclk_fimg2d", }, .sources = &clkset_mout_g2d, @@ -1258,6 +1228,42 @@ static struct clksrc_clk clk_sclk_mmc3 = { .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.0", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.1", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "s3c64xx-spi.2", + .enable = exynos4_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + /* Clock initialization code */ static struct clksrc_clk *sysclks[] = { &clk_mout_apll, @@ -1306,6 +1312,10 @@ static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_mmc1, &clk_sclk_mmc2, &clk_sclk_mmc3, + &clk_sclk_spi0, + &clk_sclk_spi1, + &clk_sclk_spi2, + }; static struct clk_lookup exynos4_clk_lookup[] = { @@ -1319,6 +1329,9 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), + CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk), + CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk), }; static int xtal_rate; diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c new file mode 100644 index 000000000000..b8e75300c77d --- /dev/null +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/mach-exynos/dev-ohci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - OHCI support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/ohci.h> + +#include <plat/devs.h> +#include <plat/usb-phy.h> + +static struct resource exynos4_ohci_resource[] = { + [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), +}; + +static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ohci = { + .name = "exynos-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_ohci_resource), + .resource = exynos4_ohci_resource, + .dev = { + .dma_mask = &exynos4_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd) +{ + struct exynos4_ohci_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata), + &exynos4_device_ohci); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 713dd5251c64..f77bce04789a 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -72,6 +72,9 @@ #define IRQ_IIC5 IRQ_SPI(63) #define IRQ_IIC6 IRQ_SPI(64) #define IRQ_IIC7 IRQ_SPI(65) +#define IRQ_SPI0 IRQ_SPI(66) +#define IRQ_SPI1 IRQ_SPI(67) +#define IRQ_SPI2 IRQ_SPI(68) #define IRQ_USB_HOST IRQ_SPI(70) #define IRQ_USB_HSOTG IRQ_SPI(71) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index d1829860a0ec..c754a22a2bb3 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -87,6 +87,10 @@ #define EXYNOS4_PA_SYSMMU_TV 0x12E20000 #define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 #define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 +#define EXYNOS4_PA_SPI0 0x13920000 +#define EXYNOS4_PA_SPI1 0x13930000 +#define EXYNOS4_PA_SPI2 0x13940000 + #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 @@ -107,6 +111,7 @@ #define EXYNOS4_PA_SROMC 0x12570000 #define EXYNOS4_PA_EHCI 0x12580000 +#define EXYNOS4_PA_OHCI 0x12590000 #define EXYNOS4_PA_HSPHY 0x125B0000 #define EXYNOS4_PA_MFC 0x13400000 @@ -148,6 +153,9 @@ #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG #define S3C_PA_UART EXYNOS4_PA_UART +#define S3C_PA_SPI0 EXYNOS4_PA_SPI0 +#define S3C_PA_SPI1 EXYNOS4_PA_SPI1 +#define S3C_PA_SPI2 EXYNOS4_PA_SPI2 #define S5P_PA_EHCI EXYNOS4_PA_EHCI #define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h new file mode 100644 index 000000000000..c256c595be5e --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/ohci.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MACH_EXYNOS_OHCI_H +#define __MACH_EXYNOS_OHCI_H + +struct exynos4_ohci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); + +#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h new file mode 100644 index 000000000000..576efdf6d091 --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h + * + * Copyright (C) 2011 Samsung Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +/* Must source from SCLK_SPI */ +#define EXYNOS4_SPI_SRCCLK_SCLK 0 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 586eb995aa96..2b11e046d391 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -41,6 +41,7 @@ #include <plat/fb.h> #include <plat/mfc.h> +#include <mach/ohci.h> #include <mach/map.h> #include "common.h" @@ -485,6 +486,16 @@ static void __init origen_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata origen_ohci_pdata; + +static void __init origen_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -608,6 +619,7 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, + &exynos4_device_ohci, &exynos4_device_pd[PD_LCD0], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_G3D], @@ -672,6 +684,7 @@ static void __init origen_machine_init(void) s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); origen_ehci_init(); + origen_ohci_init(); clk_xusbxti.rate = 24000000; s5p_tv_setup(); diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index a27b23eee9fa..b2c5557f50e4 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -42,6 +42,7 @@ #include <plat/clock.h> #include <mach/map.h> +#include <mach/ohci.h> #include "common.h" @@ -245,6 +246,16 @@ static void __init smdkv310_ehci_init(void) s5p_ehci_set_platdata(pdata); } +/* USB OHCI */ +static struct exynos4_ohci_platdata smdkv310_ohci_pdata; + +static void __init smdkv310_ohci_init(void) +{ + struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata; + + exynos4_ohci_set_platdata(pdata); +} + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -261,6 +272,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc3, &exynos4_device_ac97, &exynos4_device_i2s0, + &exynos4_device_ohci, &samsung_device_keypad, &s5p_device_mfc, &s5p_device_mfc_l, @@ -363,6 +375,7 @@ static void __init smdkv310_machine_init(void) s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); smdkv310_ehci_init(); + smdkv310_ohci_init(); clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c new file mode 100644 index 000000000000..833ff40ee0e8 --- /dev/null +++ b/arch/arm/mach-exynos/setup-spi.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/mach-exynos4/setup-spi.c + * + * Copyright (C) 2011 Samsung Electronics Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> + +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#ifdef CONFIG_S3C64XX_DEV_SPI0 +struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI1 +struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; +} +#endif + +#ifdef CONFIG_S3C64XX_DEV_SPI2 +struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, + .clk_from_cmu = true, + .tx_st_done = 25, +}; + +int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); + s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, + S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP); + return 0; +} +#endif diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 39aca045f660..41743d21e8c6 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -19,6 +19,13 @@ #include <plat/cpu.h> #include <plat/usb-phy.h> +static atomic_t host_usage; + +static int exynos4_usb_host_phy_is_on(void) +{ + return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1; +} + static int exynos4_usb_phy1_init(struct platform_device *pdev) { struct clk *otg_clk; @@ -27,6 +34,8 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) u32 rstcon; int err; + atomic_inc(&host_usage); + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); @@ -39,6 +48,9 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) return err; } + if (exynos4_usb_host_phy_is_on()) + return 0; + writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE, S5P_USBHOST_PHY_CONTROL); @@ -95,6 +107,9 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev) struct clk *otg_clk; int err; + if (atomic_dec_return(&host_usage) > 0) + return 0; + otg_clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(otg_clk)) { dev_err(&pdev->dev, "Failed to get otg clock\n"); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 3e6dfab59ef6..17cb76060125 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -120,8 +120,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(27), - .end = gpio_to_irq(27), + .start = MMP_GPIO_TO_IRQ(27), + .end = MMP_GPIO_TO_IRQ(27), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -232,6 +232,7 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_register(&pxa168_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 8de3dc6131a4..b148a9dc5a44 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -38,6 +38,7 @@ static void __init avengers_lite_init(void) /* on-chip devices */ pxa168_add_uart(2); + platform_device_register(&pxa168_device_gpio); } MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index e16f04b39b15..d839fe6421e6 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -202,6 +202,7 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 5a6a27a6cfd0..2ee8cd7829dd 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -87,8 +87,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(155), - .end = gpio_to_irq(155), + .start = MMP_GPIO_TO_IRQ(155), + .end = MMP_GPIO_TO_IRQ(155), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -110,6 +110,7 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_register(&mmp2_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 1e3abbe37cac..87765467de63 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -184,6 +184,7 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); } diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h index 99b4ce1b6562..0e135a599f3e 100644 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h @@ -2,6 +2,7 @@ #define __ASM_MACH_GPIO_PXA_H #include <mach/addr-map.h> +#include <mach/cputype.h> #include <mach/irqs.h> #define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) @@ -9,8 +10,6 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) -#define NR_BUILTIN_GPIO IRQ_GPIO_NUM - #define gpio_to_bank(gpio) ((gpio) >> 5) /* NOTE: these macros are defined here to make optimization of diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index 681262359d1c..13219ebf5128 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -3,11 +3,6 @@ #include <asm-generic/gpio.h> -#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) -#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START) +#include <mach/cputype.h> -#define __gpio_is_inverted(gpio) (0) -#define __gpio_is_occupied(gpio) (0) - -#include <plat/gpio.h> #endif /* __ASM_MACH_GPIO_H */ diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index a09d328e2ddd..34635a0bbb59 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -219,10 +219,10 @@ #define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2) #define IRQ_GPIO_START 128 -#define IRQ_GPIO_NUM 192 -#define IRQ_GPIO(x) (IRQ_GPIO_START + (x)) +#define MMP_NR_BUILTIN_GPIO 192 +#define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio)) -#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM) +#define IRQ_BOARD_START (IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO) #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 2f7b2d3c2b18..cba22fed2265 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -32,6 +32,8 @@ extern struct pxa_device_desc mmp2_device_sdh3; extern struct pxa_device_desc mmp2_device_asram; extern struct pxa_device_desc mmp2_device_isram; +extern struct platform_device mmp2_device_gpio; + static inline int mmp2_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index a677aa732c26..dc03d580a06d 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -43,6 +43,8 @@ struct pxa168_usb_pdata { /* pdata can be NULL */ int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); +extern struct platform_device pxa168_device_gpio; + static inline int pxa168_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 91be75591398..4de13abef7bb 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -21,6 +21,8 @@ extern struct pxa_device_desc pxa910_device_pwm3; extern struct pxa_device_desc pxa910_device_pwm4; extern struct pxa_device_desc pxa910_device_nand; +extern struct platform_device pxa910_device_gpio; + static inline int pxa910_add_uart(int id) { struct pxa_device_desc *d = NULL; diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 5dd1d4a6aeb9..617c60a170a4 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <asm/hardware/cache-tauros2.h> @@ -24,7 +25,6 @@ #include <mach/irqs.h> #include <mach/dma.h> #include <mach/mfp.h> -#include <mach/gpio-pxa.h> #include <mach/devices.h> #include <mach/mmp2.h> @@ -33,8 +33,6 @@ #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) - static struct mfp_addr_map mmp2_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO58, 0x54), @@ -95,24 +93,9 @@ void mmp2_clear_pmic_int(void) __raw_writel(data, mfpr_pmic); } -static void __init mmp2_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO); - - /* unmask GPIO edge detection for all 6 banks -- APMASKx */ - for (i = 0; i < 6; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL); -} - void __init mmp2_init_irq(void) { mmp2_init_icu(); - mmp2_init_gpio(); } static void sdhc_clk_enable(struct clk *clk) @@ -149,6 +132,7 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); +static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000); static APMU_CLK(nand, NAND, 0xbf, 100000000); static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops); @@ -168,6 +152,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), @@ -230,3 +215,21 @@ MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000); /* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */ MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000); +struct resource mmp2_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_MMP2_GPIO, + .end = IRQ_MMP2_GPIO, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mmp2_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(mmp2_resource_gpio), + .resource = mmp2_resource_gpio, +}; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 13f23867a86a..7bc17eaa12eb 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -13,6 +13,7 @@ #include <linux/list.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/platform_device.h> #include <asm/mach/time.h> #include <mach/addr-map.h> @@ -20,7 +21,6 @@ #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> @@ -43,26 +43,9 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata = MFP_ADDR_END, }; -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) - -static void __init pxa168_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO); - - /* unmask GPIO edge detection for all 4 banks - APMASKx */ - for (i = 0; i < 4; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL); -} - void __init pxa168_init_irq(void) { icu_init_irq(); - pxa168_init_gpio(); } /* APB peripheral clocks */ @@ -80,6 +63,7 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); +static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); @@ -105,6 +89,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), @@ -174,6 +159,25 @@ PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); +struct resource pxa168_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA168_GPIOX, + .end = IRQ_PXA168_GPIOX, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa168_resource_gpio), + .resource = pxa168_resource_gpio, +}; + struct resource pxa168_usb_host_resources[] = { /* USB Host conroller register base */ [0] = { diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 4ebbfbba39fc..3241a25784d0 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <asm/mach/time.h> #include <mach/addr-map.h> @@ -19,7 +20,6 @@ #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include <mach/dma.h> #include <mach/mfp.h> #include <mach/devices.h> @@ -77,26 +77,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = MFP_ADDR_END, }; -#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) - -static void __init pxa910_init_gpio(void) -{ - int i; - - /* enable GPIO clock */ - __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO); - - /* unmask GPIO edge detection for all 4 banks - APMASKx */ - for (i = 0; i < 4; i++) - __raw_writel(0xffffffff, APMASK(i)); - - pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL); -} - void __init pxa910_init_irq(void) { icu_init_irq(); - pxa910_init_gpio(); } /* APB peripheral clocks */ @@ -108,6 +91,7 @@ static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); +static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); @@ -123,6 +107,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), + INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"), }; @@ -179,3 +164,22 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); + +struct resource pxa910_resource_gpio[] = { + { + .start = 0xd4019000, + .end = 0xd4019fff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PXA910_AP_GPIO, + .end = IRQ_PXA910_AP_GPIO, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa910_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa910_resource_gpio), + .resource = pxa910_resource_gpio, +}; diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 257a21283ec1..8e3b5af04a57 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -19,6 +19,7 @@ #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> +#include <mach/irqs.h> #include "common.h" @@ -71,8 +72,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(80), - .end = gpio_to_irq(80), + .start = MMP_GPIO_TO_IRQ(80), + .end = MMP_GPIO_TO_IRQ(80), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -93,6 +94,7 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_register(&pxa910_device_gpio); /* off-chip devices */ platform_device_register(&smc91x_device); diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 8ac22a62bf1a..0523e422990e 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -66,7 +66,7 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = { static struct i2c_board_info teton_bga_i2c_info[] __initdata = { { I2C_BOARD_INFO("ds1337", 0x68), - .irq = gpio_to_irq(RTC_INT_GPIO) + .irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO) }, }; @@ -78,6 +78,7 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_register(&pxa168_device_gpio); } MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index f02658825576..5ac5d5832e45 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -24,12 +24,13 @@ #include <mach/addr-map.h> #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> +#include <mach/irqs.h> #include "common.h" -#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ +#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ ((x < 16) ? x : 15))) -#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ +#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ ((x < 16) ? x : 15))) /* @@ -122,6 +123,7 @@ static struct platform_device ttc_dkb_device_onenand = { }; static struct platform_device *ttc_dkb_devices[] = { + &pxa910_device_gpio, &ttc_dkb_device_onenand, }; @@ -136,7 +138,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { { .type = "max7312", .addr = 0x23, - .irq = IRQ_GPIO(80), + .irq = MMP_GPIO_TO_IRQ(80), .platform_data = &max7312_data, }, }; diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index da6e4aad177c..df0ad3ce234b 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/jiffies.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #include <asm/clkdev.h> #include <asm/div64.h> @@ -29,6 +30,7 @@ #include <mach/mx28.h> #include <mach/common.h> #include <mach/clock.h> +#include <mach/digctl.h> #include "regs-clkctrl-mx28.h" @@ -43,6 +45,33 @@ static struct clk emi_clk; static struct clk saif0_clk; static struct clk saif1_clk; static struct clk clk32k_clk; +static DEFINE_SPINLOCK(clkmux_lock); + +/* + * HW_SAIF_CLKMUX_SEL: + * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1 + * clock pins selected for SAIF1 input clocks. + * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and + * SAIF0 clock inputs selected for SAIF1 input clocks. + * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + */ +int mxs_saif_clkmux_select(unsigned int clkmux) +{ + if (clkmux > 0x3) + return -EINVAL; + + spin_lock(&clkmux_lock); + __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX, + DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR); + __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX, + DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR); + spin_unlock(&clkmux_lock); + + return 0; +} static int _raw_clk_enable(struct clk *clk) { @@ -785,6 +814,15 @@ int __init mx28_clocks_init(void) clk_set_parent(&saif0_clk, &pll0_clk); clk_set_parent(&saif1_clk, &pll0_clk); + /* + * Set an initial clock rate for the saif internal logic to work + * properly. This is important when working in EXTMASTER mode that + * uses the other saif's BITCLK&LRCLK but it still needs a basic + * clock which should be fast enough for the internal logic. + */ + clk_set_rate(&saif0_clk, 24000000); + clk_set_rate(&saif1_clk, 24000000); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index c8887103f0e3..4f50094e293d 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -47,6 +47,7 @@ struct platform_device *__init mx28_add_mxsfb( const struct mxsfb_platform_data *pdata); extern const struct mxs_saif_data mx28_saif_data[] __initconst; -#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id]) +#define mx28_add_saif(id, pdata) \ + mxs_add_saif(&mx28_saif_data[id], pdata) struct platform_device *__init mx28_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c index 1ec965e9fe92..f6e3a60b4201 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c @@ -32,7 +32,8 @@ const struct mxs_saif_data mx28_saif_data[] __initconst = { }; #endif -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data, + const struct mxs_saif_platform_data *pdata) { struct resource res[] = { { @@ -56,5 +57,5 @@ struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data) }; return mxs_add_platform_device("mxs-saif", data->id, res, - ARRAY_SIZE(res), NULL, 0); + ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 1388485414c9..e1237ab25862 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -17,6 +17,7 @@ extern const u32 *mxs_get_ocotp(void); extern int mxs_reset_block(void __iomem *); extern void mxs_timer_init(struct clk *, int); extern void mxs_restart(char, const char *); +extern int mxs_saif_clkmux_select(unsigned int clkmux); extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index a8080f44c03d..dc369c1239fc 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -94,6 +94,7 @@ struct platform_device *__init mxs_add_mxs_pwm( resource_size_t iobase, int id); /* saif */ +#include <sound/saif.h> struct mxs_saif_data { int id; resource_size_t iobase; @@ -103,4 +104,5 @@ struct mxs_saif_data { }; struct platform_device *__init mxs_add_saif( - const struct mxs_saif_data *data); + const struct mxs_saif_data *data, + const struct mxs_saif_platform_data *pdata); diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h new file mode 100644 index 000000000000..49a888c65d6d --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -0,0 +1,21 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_DIGCTL_H__ +#define __MACH_DIGCTL_H__ + +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 + +#define HW_DIGCTL_CTRL 0x0 +#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 +#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#endif diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index d0cc37fd23a4..eb0597be4e23 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -27,6 +27,7 @@ #include <mach/common.h> #include <mach/iomux-mx28.h> +#include <mach/digctl.h> #include "devices-mx28.h" @@ -421,6 +422,18 @@ static struct gpio mx28evk_lcd_gpios[] = { { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, }; +static const struct mxs_saif_platform_data + mx28evk_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -454,8 +467,9 @@ static void __init mx28evk_init(void) else mx28_add_mxsfb(&mx28evk_mxsfb_pdata); - mx28_add_saif(0); - mx28_add_saif(1); + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); + mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]); mx28_add_mxs_i2c(0); i2c_register_board_info(0, mxs_i2c0_board_info, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 5598e00ccf52..4b4c9e25a83e 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -410,6 +410,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 5, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .pm_caps = MMC_PM_KEEP_POWER, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ocr_mask = MMC_VDD_165_195, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f5a3a3f11739..4b1cfe32e6ba 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -24,6 +24,7 @@ #include <linux/i2c/pca953x.h> #include <linux/can/platform/ti_hecc.h> #include <linux/davinci_emac.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -40,6 +41,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #define AM35XX_EVM_MDIO_FREQUENCY (1000000) @@ -455,6 +457,23 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) static struct omap_board_config_kernel am3517_evm_config[] __initdata = { }; +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 127, + .gpio_wp = 126, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 128, + .gpio_wp = 129, + }, + {} /* Terminator */ +}; + + static void __init am3517_evm_init(void) { omap_board_config = am3517_evm_config; @@ -483,6 +502,9 @@ static void __init am3517_evm_init(void) /* MUSB */ am3517_evm_musb_init(); + + /* MMC init function */ + omap2_hsmmc_init(mmc); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 039cadf84c11..d75e5f6b8a01 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3297,7 +3297,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3333,7 +3333,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3379,20 +3379,18 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), - CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 730097ee0f23..08e86d793a1f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3304,7 +3304,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), - CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3315,7 +3315,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3323,7 +3323,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), @@ -3383,8 +3383,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), - CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index f4a1020559a7..bd844af13af5 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -171,6 +171,17 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, } } +static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) +{ + u32 reg; + + if (mmc->slots[0].internal_clock) { + reg = omap_ctrl_readl(control_devconf1_offset); + reg |= OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); + } +} + static void hsmmc23_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { @@ -179,16 +190,19 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot, if (mmc->slots[0].remux) mmc->slots[0].remux(dev, slot, power_on); - if (power_on) { - /* Only MMC2 supports a CLKIN */ - if (mmc->slots[0].internal_clock) { - u32 reg; + if (power_on) + hsmmc2_select_input_clk_src(mmc); +} - reg = omap_ctrl_readl(control_devconf1_offset); - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } - } +static int am35x_hsmmc2_set_power(struct device *dev, int slot, + int power_on, int vdd) +{ + struct omap_mmc_platform_data *mmc = dev->platform_data; + + if (power_on) + hsmmc2_select_input_clk_src(mmc); + + return 0; } static int nop_mmc_set_power(struct device *dev, int slot, int power_on, @@ -200,10 +214,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { @@ -296,6 +312,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, mmc->slots[0].name = hc_name; mmc->nr_slots = 1; mmc->slots[0].caps = c->caps; + mmc->slots[0].pm_caps = c->pm_caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; if (cpu_is_omap44xx()) @@ -336,11 +353,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, * * temporary HACK: ocr_mask instead of fixed supply */ - mmc->slots[0].ocr_mask = c->ocr_mask; - - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; + if (cpu_is_omap3505() || cpu_is_omap3517()) + mmc->slots[0].ocr_mask = MMC_VDD_165_195 | + MMC_VDD_26_27 | + MMC_VDD_27_28 | + MMC_VDD_29_30 | + MMC_VDD_30_31 | + MMC_VDD_31_32; else + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (!cpu_is_omap3517() && !cpu_is_omap3505()) mmc->slots[0].features |= HSMMC_HAS_PBIAS; if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) @@ -363,6 +386,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } } + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + /* OMAP3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && (c->caps & MMC_CAP_8_BIT_DATA)) { @@ -372,6 +398,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, } break; case 2: + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = am35x_hsmmc2_set_power; + if (c->ext_clock) c->transceiver = 1; if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index f757e78d4d4f..c4409730c4bb 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,6 +12,7 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ + u32 pm_caps; /* PM capabilities */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 89ae29847c59..771dc781b746 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,51 +28,28 @@ #include <mach/hardware.h> #include <mach/irqs.h> #include <plat/usb.h> +#include <plat/omap_device.h> #include "mux.h" #ifdef CONFIG_MFD_OMAP_USB_HOST -#define OMAP_USBHS_DEVICE "usbhs-omap" - -static struct resource usbhs_resources[] = { - { - .name = "uhh", - .flags = IORESOURCE_MEM, - }, - { - .name = "tll", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ehci-irq", - .flags = IORESOURCE_IRQ, - }, - { - .name = "ohci", - .flags = IORESOURCE_MEM, - }, - { - .name = "ohci-irq", - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device usbhs_device = { - .name = OMAP_USBHS_DEVICE, - .id = 0, - .num_resources = ARRAY_SIZE(usbhs_resources), - .resource = usbhs_resources, -}; +#define OMAP_USBHS_DEVICE "usbhs_omap" +#define USBHS_UHH_HWMODNAME "usb_host_hs" +#define USBHS_TLL_HWMODNAME "usb_tll_hs" static struct usbhs_omap_platform_data usbhs_data; static struct ehci_hcd_omap_platform_data ehci_data; static struct ohci_hcd_omap_platform_data ohci_data; +static struct omap_device_pm_latency omap_uhhtll_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -508,7 +485,10 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { - int i; + struct omap_hwmod *oh[2]; + struct omap_device *od; + int bus_id = -1; + int i; for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { usbhs_data.port_mode[i] = pdata->port_mode[i]; @@ -523,44 +503,34 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { - usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP34XX_EHCI_BASE; - usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = INT_34XX_EHCI_IRQ; - usbhs_resources[4].start = OMAP34XX_OHCI_BASE; - usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = INT_34XX_OHCI_IRQ; setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); } else if (cpu_is_omap44xx()) { - usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; - usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; - usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; - usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; - usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; - usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; - usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; - usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); } - if (platform_device_add_data(&usbhs_device, - &usbhs_data, sizeof(usbhs_data)) < 0) { - printk(KERN_ERR "USBHS platform_device_add_data failed\n"); - goto init_end; + oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); + if (!oh[0]) { + pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME); + return; } - if (platform_device_register(&usbhs_device) < 0) - printk(KERN_ERR "USBHS platform_device_register failed\n"); + oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME); + if (!oh[1]) { + pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME); + return; + } -init_end: - return; + od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + (void *)&usbhs_data, sizeof(usbhs_data), + omap_uhhtll_latency, + ARRAY_SIZE(omap_uhhtll_latency), false); + if (IS_ERR(od)) { + pr_err("Could not build hwmod devices %s,%s\n", + USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); + return; + } } #else @@ -570,5 +540,3 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } #endif - - diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 4cb069fd9af2..ccdac4b6a469 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info) { int ret; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_FALLING, "AM200", info->par); if (ret) diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index fa8bad235d9f..76c4b9494031 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par) { int i; - free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par); for (i = 0; i < ARRAY_SIZE(gpios); i++) gpio_free(gpios[i]); @@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info) int ret; struct broadsheetfb_par *par = info->par; - ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq, + ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq, IRQF_DISABLED|IRQF_TRIGGER_RISING, "AM300", par); if (ret) diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index a34de9a0d5e5..c35456f02acb 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -180,7 +180,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), + .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ), }; diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index c2f0be040d27..c91727d1fe09 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING } }; @@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void) static struct plat_serial8250_port ti16c752_platform_data[] = { [0] = { .mapbase = 0x14000000, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [1] = { .mapbase = 0x14000040, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [2] = { .mapbase = 0x14000080, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, @@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = { }, [3] = { .mapbase = 0x140000c0, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)), .irqflags = IRQF_TRIGGER_RISING, .flags = TI16C752_FLAGS, .iotype = UPIO_MEM, diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 13518a705399..431ef56700c4 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -33,7 +33,7 @@ /* GPIO IRQ usage */ #define GPIO83_MMC_IRQ (83) -#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ) +#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ) /* MMC power enable */ #define GPIO105_MMC_POWER (105) @@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = gpio_to_irq(95), + .irq = PXA_GPIO_TO_IRQ(95), .chip_select = 0, .controller_data = &cm_x270_libertas_chip, .platform_data = &cm_x270_libertas_pdata, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index ec170a552c23..8fa4ad27edf3 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -58,8 +58,8 @@ extern void cmx270_init(void); #define CMX255_GPIO_IT8152_IRQ (0) #define CMX270_GPIO_IT8152_IRQ (22) -#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ) -#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ) +#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ) +#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ) #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource cmx255_dm9000_resource[] = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7236974da0b7..4b981b82d2a5 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -64,7 +64,7 @@ #define GPIO82_MMC_IRQ (82) #define GPIO85_MMC_WP (85) -#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) +#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 6a685165c9f2..29d5d541f602 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -218,8 +218,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), - .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; @@ -249,7 +249,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { }; static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { - .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ), }; static struct platform_device colibri_pxa270_ucb1400_device = { diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index c01059a61f33..0846d210cb05 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 5028f2300d50..6ad3359063af 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), + .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), + .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9d4dc5970b9c..66600f05e436 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = { .chip_select = 0, .platform_data = &corgi_ads7846_info, .controller_data= &corgi_ads7846_chip, - .irq = gpio_to_irq(CORGI_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 29034778bfda..39e265cfc86d 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -40,7 +41,9 @@ static struct gpio charger_gpios[] = { { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, + { CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" }, }; static void corgi_charger_init(void) @@ -90,7 +93,12 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) { int is_resume = 0; - dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR); + dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, " + "GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n", + PEDR, gpio_get_value(CORGI_GPIO_AC_IN), + gpio_get_value(CORGI_GPIO_CHRG_FULL), + gpio_get_value(CORGI_GPIO_KEY_INT), + gpio_get_value(CORGI_GPIO_WAKEUP)); if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) { if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { @@ -124,14 +132,21 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm) static unsigned long corgi_charger_wakeup(void) { - return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) ); + unsigned long ret; + + ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN)) + | (!gpio_get_value(CORGI_GPIO_KEY_INT) + << GPIO_bit(CORGI_GPIO_KEY_INT)) + | (!gpio_get_value(CORGI_GPIO_WAKEUP) + << GPIO_bit(CORGI_GPIO_WAKEUP)); + return ret; } unsigned long corgipm_read_devdata(int type) { switch(type) { case SHARPSL_STATUS_ACIN: - return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0); + return !gpio_get_value(CORGI_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 2e0425404de5..18fd177073f4 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,9 +415,29 @@ static struct resource pxa_rtc_resources[] = { }, }; +static struct resource sa1100_rtc_resources[] = { + [0] = { + .start = 0x40900000, + .end = 0x409000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, + .num_resources = ARRAY_SIZE(sa1100_rtc_resources), + .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { @@ -1051,6 +1071,36 @@ struct platform_device pxa3xx_device_ssp4 = { }; #endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +struct resource pxa_resource_gpio[] = { + { + .start = 0x40e00000, + .end = 0x40e0ffff, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_GPIO0, + .end = IRQ_GPIO0, + .name = "gpio0", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO1, + .end = IRQ_GPIO1, + .name = "gpio1", + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_GPIO_2_x, + .end = IRQ_GPIO_2_x, + .name = "gpio_mux", + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_gpio = { + .name = "pxa-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 2fd5a8b35757..1475db107254 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp; extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; +extern struct platform_device pxa_device_gpio; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index bd396ba67af7..d80c0ba9a095 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -70,7 +70,7 @@ /* common GPIOs */ #define GPIO11_NAND_CS (11) #define GPIO41_ETHIRQ (41) -#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ) #define GPIO115_WLAN_PWEN (115) #define GPIO19_WLAN_STRAP (19) #define GPIO9_USB_VBUS_EN (9) @@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = { .modalias = "libertas_spi", .max_speed_hz = 13000000, .bus_num = 2, - .irq = IRQ_GPIO(116), + .irq = PXA_GPIO_TO_IRQ(116), .chip_select = 0, .controller_data = &em_x270_libertas_chip, .platform_data = &em_x270_libertas_pdata, @@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = { static struct i2c_board_info em_x270_i2c_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = PXA_GPIO_TO_IRQ(0), .platform_data = &em_x270_da9030_info, }; diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 69473db97758..f79a610c62fc 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -119,8 +119,8 @@ struct resource eseries_tmio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), - .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index ce16bdae96de..fb9b62dcf4ca 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -252,8 +252,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), - .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ), .flags = IORESOURCE_IRQ, }, /* SD part */ @@ -263,8 +263,8 @@ static struct resource asic3_resources[] = { .flags = IORESOURCE_MEM, }, [3] = { - .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), - .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = { .modalias = "ads7846", .bus_num = 2, .max_speed_hz = 2600000, /* 100 kHz sample rate */ - .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ), .platform_data = &tsc2046_info, .controller_data = &tsc2046_chip, }, @@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = { .name = "ac", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD9_nAC_IN), - .end = gpio_to_irq(GPIOD9_nAC_IN), + .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), + .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), }, [1] = { .name = "usb", .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, - .start = gpio_to_irq(GPIOD14_nUSBC_DETECT), - .end = gpio_to_irq(GPIOD14_nUSBC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), }, }; diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index e239b82c99d7..67400192ed3b 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info1, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, { .modalias = "mcp2515", @@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info2, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, { .modalias = "mcp2515", @@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 0, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info3, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, { .modalias = "mcp2515", @@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = { .chip_select = 1, .platform_data = &mcp251x_info, .controller_data = &mcp251x_chip_info4, - .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4) + .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } }; diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index fbabd84e110c..8af1840e12cc 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -75,8 +75,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(4), - .end = IRQ_GPIO(4), + .start = PXA_GPIO_TO_IRQ(4), + .end = PXA_GPIO_TO_IRQ(4), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 6d7eab3d0867..f02fa1e6ba86 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -172,9 +172,9 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) -#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) -#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) +#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ) +#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ) +#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD) #define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 5dfd1195a5a7..f3c3493b468d 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -66,18 +66,18 @@ /* * Corgi Interrupts */ -#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) -#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) -#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) -#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) -#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) -#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ -#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ +#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0) +#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3) +#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4) +#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10) +#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11) +#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */ +#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */ /* @@ -98,7 +98,7 @@ CORGI_SCP_MIC_BIAS ) #define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) -#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0) #define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */ #define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */ diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h index 747ab1a71f2f..2628e7b72116 100644 --- a/arch/arm/mach-pxa/include/mach/csb726.h +++ b/arch/arm/mach-pxa/include/mach/csb726.h @@ -19,8 +19,8 @@ #define CSB726_FLASH_SIZE (64 * 1024 * 1024) #define CSB726_FLASH_uMON (8 * 1024 * 1024) -#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN) -#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501) +#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN) +#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501) #endif diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h deleted file mode 100644 index 41b4c93a96c2..000000000000 --- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Written by Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __MACH_PXA_GPIO_PXA_H -#define __MACH_PXA_GPIO_PXA_H - -#include <mach/irqs.h> -#include <mach/hardware.h> - -#define GPIO_REGS_VIRT io_p2v(0x40E00000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -/* GPIO Pin Level Registers */ -#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) -#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) -#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) -#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) - -/* GPIO Pin Direction Registers */ -#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) -#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) -#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) -#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) - -/* GPIO Pin Output Set Registers */ -#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) -#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) -#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) -#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) - -/* GPIO Pin Output Clear Registers */ -#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) -#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) -#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) -#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) - -/* GPIO Rising Edge Detect Registers */ -#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) -#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) -#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) -#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) - -/* GPIO Falling Edge Detect Registers */ -#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) -#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) -#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) -#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) - -/* GPIO Edge Detect Status Registers */ -#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) -#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) -#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) -#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) - -/* GPIO Alternate Function Select Registers */ -#define GAFR0_L GPIO_REG(0x0054) -#define GAFR0_U GPIO_REG(0x0058) -#define GAFR1_L GPIO_REG(0x005C) -#define GAFR1_U GPIO_REG(0x0060) -#define GAFR2_L GPIO_REG(0x0064) -#define GAFR2_U GPIO_REG(0x0068) -#define GAFR3_L GPIO_REG(0x006C) -#define GAFR3_U GPIO_REG(0x0070) - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) -#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) -#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) -#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) -#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) - - -#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static inline int __gpio_is_inverted(unsigned gpio) -{ - return cpu_is_pxa25x() && gpio > 85; -} -#else -static inline int __gpio_is_inverted(unsigned gpio) { return 0; } -#endif - -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static inline int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } else - return GPDR(gpio) & GPIO_bit(gpio); -} - -#include <plat/gpio-pxa.h> -#endif /* __MACH_PXA_GPIO_PXA_H */ diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 004cade7bb13..0248e433bc98 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -25,24 +25,8 @@ #define __ASM_ARCH_PXA_GPIO_H #include <asm-generic/gpio.h> -/* The defines for the driver are needed for the accelerated accessors */ -#include "gpio-pxa.h" -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#include <mach/irqs.h> +#include <mach/hardware.h> -static inline int irq_to_gpio(unsigned int irq) -{ - int gpio; - - if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1) - return irq - IRQ_GPIO0; - - gpio = irq - PXA_GPIO_IRQ_BASE; - if (gpio >= 2 && gpio < NR_BUILTIN_GPIO) - return gpio; - - return -1; -} - -#include <plat/gpio.h> #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 9b898680b206..dba14b6503ad 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -24,7 +24,7 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_USB_GPIOx 41 /* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) +#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) #define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) #define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) @@ -35,7 +35,7 @@ has detected a cable insertion; driven low otherwise. */ */ #define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ #define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) +#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) /* * SMC Ethernet definitions @@ -49,10 +49,10 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO_GUMSTIX_ETH0 36 #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) #define GPIO_GUMSTIX_ETH1 27 #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) +#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) /* CF reset line */ @@ -63,18 +63,18 @@ has detected a cable insertion; driven low otherwise. */ #define GPIO4_nSTSCHG GPIO4_nBVD1 #define GPIO11_nCD 11 #define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) +#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) /* CF slot 1 */ #define GPIO18_nBVD1 18 #define GPIO18_nSTSCHG GPIO18_nBVD1 #define GPIO36_nCD 36 #define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) +#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) /* CF GPIO line modes */ #define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 37408449ec25..8bc02913517c 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -15,7 +15,7 @@ #include <linux/gpio.h> #include <linux/mfd/asic3.h> -#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO +#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) #define HX4700_NR_IRQS (IRQ_BOARD_START + 70) diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h index 5eff96fcc944..22a96f87232b 100644 --- a/arch/arm/mach-pxa/include/mach/idp.h +++ b/arch/arm/mach-pxa/include/mach/idp.h @@ -131,28 +131,26 @@ #define PCC_VS2 (1 << 1) #define PCC_VS1 (1 << 0) -#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) - /* A listing of interrupts used by external hardware devices */ -#define TOUCH_PANEL_IRQ IRQ_GPIO(5) -#define IDE_IRQ IRQ_GPIO(21) +#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5) +#define IDE_IRQ PXA_GPIO_TO_IRQ(21) #define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define ETHERNET_IRQ IRQ_GPIO(4) +#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4) #define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) +#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7) #define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) +#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8) #define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH -#define PCMCIA_S0_RDYINT IRQ_GPIO(19) -#define PCMCIA_S1_RDYINT IRQ_GPIO(22) +#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19) +#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22) /* diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 7cc5a781e99e..32975adf3ca4 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -88,10 +88,8 @@ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) -#define PXA_GPIO_IRQ_NUM (192) - -#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) -#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) +#define PXA_NR_BUILTIN_GPIO (192) +#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) /* * The following interrupts are for board specific purposes. Since @@ -100,7 +98,7 @@ * By default, no board IRQ is reserved. It should be finished in * custom board since sparse IRQ is already enabled. */ -#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) +#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO) #define NR_IRQS (IRQ_BOARD_START) diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index b6238cbd8aea..8066be54e9f5 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -1,13 +1,11 @@ #ifndef __ASM_ARCH_LITTLETON_H #define __ASM_ARCH_LITTLETON_H -#include <mach/gpio-pxa.h> - #define LITTLETON_ETH_PHYS 0x30000000 #define LITTLETON_GPIO_LCD_CS (17) -#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO) +#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x)) #define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 7cbfc5d3f9df..ba6a6e1d29e9 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -78,7 +78,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO +#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index ae536e86d8e8..2c4471336570 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -68,10 +68,10 @@ /* 20, 53 and 86 are usb related too */ /* INTERRUPTS */ -#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) -#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) -#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) -#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) +#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 6baf7469d4ec..0bd4f036c72f 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -48,10 +48,10 @@ #define GPIO_NR_PALMT5_BT_RESET 83 /* INTERRUPTS */ -#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) -#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) -#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) -#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) +#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h index 3f9dd3fd4638..c383a21680b6 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/include/mach/palmtc.h @@ -52,8 +52,8 @@ #define GPIO_NR_PALMTC_IR_DISABLE 45 /* IRQs */ -#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N) -#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY) +#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N) +#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY) /* UCB1400 GPIOs */ #define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00) diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 7074a6ed46c6..f2e530380253 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -62,10 +62,10 @@ #define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 /* INTERRUPTS */ -#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) -#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) -#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) -#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) +#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET) /** HERE ARE INIT VALUES **/ diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 4bac588478a8..6bf28de228bd 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -34,7 +34,7 @@ /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 -#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO) #define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define ADR_PCM027_RTC 0x51 /* I2C address */ @@ -43,21 +43,21 @@ /* Ethernet chip (SMSC91C111) */ #define PCM027_ETH_IRQ_GPIO 52 -#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO) #define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM027_ETH_PHYS PXA_CS5_PHYS #define PCM027_ETH_SIZE (1*1024*1024) /* CAN controller SJA1000 (unsupported yet) */ #define PCM027_CAN_IRQ_GPIO 114 -#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO) #define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_CAN_PHYS 0x22000000 #define PCM027_CAN_SIZE 0x100 /* SPI GPIO expander (unsupported yet) */ #define PCM027_EGPIO_IRQ_GPIO 27 -#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO) #define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING #define PCM027_EGPIO_CS 24 /* diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index 8a4383b776d7..d72791695b26 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -28,14 +28,14 @@ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ #define PCM990_CTRL_INT_IRQ_GPIO 9 -#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO) #define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 -#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO) #define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* visible CPLD (U7) registers */ @@ -132,7 +132,7 @@ * IDE */ #define PCM990_IDE_IRQ_GPIO 13 -#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO) #define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_BASE 0xee000000 @@ -188,11 +188,11 @@ * Compact Flash */ #define PCM990_CF_IRQ_GPIO 11 -#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO) #define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_CD_GPIO 12 -#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO) #define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ @@ -258,14 +258,14 @@ * Wolfson AC97 Touch */ #define PCM990_AC97_IRQ_GPIO 10 -#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO) #define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING /* * MMC phyCORE */ #define PCM990_MMC0_IRQ_GPIO 9 -#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO) #define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING /* diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 83d1cfd00fc9..f32ff75dcca8 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -47,18 +47,18 @@ #define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ -#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) -#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) -#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) -#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) -#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) -#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) +#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0) +#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1) +#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4) +#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16) +#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5) +#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11) +#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10) +#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17) +#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14) +#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8) +#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9) +#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13) /* SCOOP GPIOs */ #define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 @@ -71,7 +71,7 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) -#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO) +#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0) #define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2) #define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7) diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 685749a51c42..0bfe6507c95d 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -108,7 +108,7 @@ #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 -#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO) +#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO) #define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) #define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) #define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) @@ -140,7 +140,7 @@ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) -#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) #define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1) #define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) @@ -152,7 +152,7 @@ #define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) /* Akita IO Expander GPIOs */ -#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) #define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) #define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) @@ -164,23 +164,23 @@ /* Spitz IRQ Definitions */ -#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) -#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) -#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) -#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) +#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT) +#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN) +#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT) +#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN) +#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT) +#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC) +#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY) +#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA) +#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB) +#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER) +#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT) +#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO) +#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ) +#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD) +#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ) +#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT) +#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT) /* * Shared data structures diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 1272c4b56ceb..2bb0e862598c 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -24,7 +24,7 @@ /* * SCOOP2 internal GPIOs */ -#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO +#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) @@ -42,7 +42,7 @@ /* * SCOOP2 jacket GPIOs */ -#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12) #define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) @@ -59,7 +59,7 @@ /* * TC6393XB GPIOs */ -#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12) #define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) #define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) @@ -141,30 +141,30 @@ /* * Interrupts */ -#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) -#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) -#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) -#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) -#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) -#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) -#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) -#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) -#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) -#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) -#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) -#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) -#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) -#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) -#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) -#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) -#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) -#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) -#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) -#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) - -#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) +#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW) #define TOSA_KEY_SYNC KEY_102ND /* ??? */ diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h index 903e1a2e6641..d2ca01053f69 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/include/mach/trizeps4.h @@ -43,30 +43,30 @@ /* Ethernet Controller Davicom DM9000 */ #define GPIO_DM9000 101 -#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) +#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000) /* UCB1400 audio / TS-controller */ #define GPIO_UCB1400 1 -#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) +#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400) /* PCMCIA socket Compact Flash */ #define GPIO_PCD 11 /* PCMCIA Card Detect */ -#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) +#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD) #define GPIO_PRDY 13 /* READY / nINT */ -#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) +#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY) /* MMC socket */ #define GPIO_MMC_DET 12 -#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) +#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET) /* DOC NAND chip */ #define GPIO_DOC_LOCK 94 #define GPIO_DOC_IRQ 93 -#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ) +#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ) /* SPI interface */ #define GPIO_SPI 53 -#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI) +#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI) /* LEDS using tx2 / rx2 */ #define GPIO_SYS_BUSY_LED 46 @@ -74,7 +74,7 @@ /* Off-module PIC on ConXS board */ #define GPIO_PIC 0 -#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) +#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC) #ifdef CONFIG_MACH_TRIZEPS_CONXS /* for CONXS base board define these registers */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 532c5d3a97d2..5dae15ea6718 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -22,7 +22,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -92,44 +91,6 @@ static struct irq_chip pxa_internal_irq_chip = { .irq_unmask = pxa_unmask_irq, }; -/* - * GPIO IRQs for GPIO 0 and 1 - */ -static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - IRQ_GPIO0; - - if (__gpio_is_occupied(gpio)) { - pr_err("%s failed: GPIO is configured\n", __func__); - return -EINVAL; - } - - if (type & IRQ_TYPE_EDGE_RISING) - GRER0 |= GPIO_bit(gpio); - else - GRER0 &= ~GPIO_bit(gpio); - - if (type & IRQ_TYPE_EDGE_FALLING) - GFER0 |= GPIO_bit(gpio); - else - GFER0 &= ~GPIO_bit(gpio); - - return 0; -} - -static void pxa_ack_low_gpio(struct irq_data *d) -{ - GEDR0 = (1 << (d->irq - IRQ_GPIO0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .irq_ack = pxa_ack_low_gpio, - .irq_mask = pxa_mask_irq, - .irq_unmask = pxa_unmask_irq, - .irq_set_type = pxa_set_low_gpio_type, -}; - asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) { uint32_t icip, icmr, mask; @@ -160,26 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) } while (1); } -static void __init pxa_init_low_gpio_irq(set_wake_t fn) -{ - int irq; - - /* clear edge detection on GPIO 0 and 1 */ - GFER0 &= ~0x3; - GRER0 &= ~0x3; - GEDR0 = 0x3; - - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - irq_set_chip_and_handler(irq, &pxa_low_gpio_chip, - handle_edge_irq); - irq_set_chip_data(irq, irq_base(0)); - set_irq_flags(irq, IRQF_VALID); - } - - pxa_low_gpio_chip.irq_set_wake = fn; -} - -void __init pxa_init_irq(int irq_nr, set_wake_t fn) +void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) { int irq, i, n; @@ -209,7 +151,6 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) __raw_writel(1, irq_base(0) + ICCR); pxa_internal_irq_chip.irq_set_wake = fn; - pxa_init_low_gpio_irq(fn); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index c337c7eed514..1fb86edb857c 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -124,8 +124,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), - .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, } }; @@ -396,7 +396,7 @@ static struct i2c_board_info littleton_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &littleton_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)), }, [1] = { .type = "max7320", diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6119c015f393..cee9ce2fc0b5 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -152,8 +152,8 @@ static void __init lpd270_init_irq(void) handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 4b7a52871652..6ebd276aebeb 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -170,8 +170,8 @@ static void __init lubbock_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 4e6774fff422..3d6baf91396c 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -184,8 +184,8 @@ static struct resource egpio_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), - .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = { }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index ca14555d5e15..1aebaf719462 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -178,8 +178,8 @@ static void __init mainstone_init_irq(void) MST_INTMSKENA = 0; MST_INTSETCLR = 0; - irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); + irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler); + irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 43a5f6861ca3..f14775536b83 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -20,7 +21,6 @@ #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> -#include <mach/gpio-pxa.h> #include "generic.h" @@ -29,6 +29,10 @@ #define GAFR_L(x) __GAFR(0, x) #define GAFR_U(x) __GAFR(1, x) +#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) +#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) + #define PWER_WE35 (1 << 24) struct gpio_desc { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index dce71b4a3a55..e80a3db735c2 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -537,15 +537,15 @@ static struct pda_power_pdata power_pdata = { static struct resource power_resources[] = { [0] = { .name = "ac", - .start = gpio_to_irq(GPIO96_AC_DETECT), - .end = gpio_to_irq(GPIO96_AC_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, [1] = { .name = "usb", - .start = gpio_to_irq(GPIO13_nUSB_DETECT), - .end = gpio_to_irq(GPIO13_nUSB_DETECT), + .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), + .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, }, diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 90928d6e1a5b..83570a79e7d2 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -417,8 +417,8 @@ static struct resource dm9k_resources[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE } }; diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6d38c6548b3d..abab4e2b122c 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -378,7 +378,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include <linux/i2c/pca953x.h> static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO, + .gpio_base = PXA_NR_BUILTIN_GPIO, }; static int gpio_bus_switch = -EINVAL; @@ -406,9 +406,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (gpio_bus_switch < 0) { - ret = gpio_request(NR_BUILTIN_GPIO, "camera"); + ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO; + gpio_bus_switch = PXA_NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b260ce872d2d..69036e42ca31 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -166,8 +166,8 @@ static struct resource locomo_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(10), - .end = IRQ_GPIO(10), + .start = PXA_GPIO_TO_IRQ(10), + .end = PXA_GPIO_TO_IRQ(10), .flags = IORESOURCE_IRQ, }, }; @@ -212,7 +212,7 @@ static struct spi_board_info poodle_spi_devices[] = { .bus_num = 1, .platform_data = &poodle_ads7846_info, .controller_data= &poodle_ads7846_chip, - .irq = gpio_to_irq(POODLE_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT), }, }; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f05f9486b0cb..adf058fa97ee 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -17,6 +17,7 @@ * need be. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -208,6 +209,8 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = @@ -287,7 +290,7 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask = 0; if (gpio >= 0 && gpio < 85) @@ -312,14 +315,12 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake); } #ifdef CONFIG_CPU_PXA26x void __init pxa26x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake); } #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index bc5a98ebaa72..180bd8675d4b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -229,6 +230,8 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM @@ -355,7 +358,7 @@ static inline void pxa27x_init_pm(void) {} */ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) { - int gpio = irq_to_gpio(d->irq); + int gpio = pxa_irq_to_gpio(d->irq); uint32_t mask; if (gpio >= 0 && gpio < 128) @@ -386,7 +389,6 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake); } static struct map_desc pxa27x_io_desc[] __initdata = { @@ -422,6 +424,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 40bb16501d86..0388eda7878a 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,6 +89,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 8d614ecd8e99..d487e1ff4c9a 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,6 +83,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 0737c59b88ae..f107c71c7589 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include <asm/suspend.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -56,6 +55,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); +static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0); static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops); @@ -67,6 +67,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), @@ -88,6 +89,7 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), }; #ifdef CONFIG_PM @@ -365,7 +367,8 @@ static struct irq_chip pxa_ext_wakeup_chip = { .irq_set_type = pxa_set_ext_wakeup_type, }; -static void __init pxa_init_ext_wakeup_irq(set_wake_t fn) +static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *, + unsigned int)) { int irq; @@ -388,7 +391,6 @@ void __init pxa3xx_init_irq(void) pxa_init_irq(56, pxa3xx_set_wake); pxa_init_ext_wakeup_irq(pxa3xx_set_wake); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } static struct map_desc pxa3xx_io_desc[] __initdata = { @@ -417,6 +419,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 51371b39d2a3..fccc644702e6 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -20,7 +20,6 @@ #include <linux/syscore_ops.h> #include <mach/hardware.h> -#include <mach/gpio-pxa.h> #include <mach/pxa3xx-regs.h> #include <mach/pxa930.h> #include <mach/reset.h> @@ -212,11 +211,13 @@ static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); +static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), @@ -230,12 +231,12 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), + INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), }; void __init pxa95x_init_irq(void) { pxa_init_irq(96, NULL); - pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } /* @@ -248,6 +249,7 @@ void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { + &pxa_device_gpio, &sa1100_device_rtc, &pxa_device_rtc, &pxa27x_device_ssp1, diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 4962b1676629..22818c7694a8 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = gpio_to_irq(GPIO_ETH_IRQ), - .end = gpio_to_irq(GPIO_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -672,7 +672,7 @@ static struct lis3lv02d_platform_data lis3_pdata = { .chip_select = 1, \ .controller_data = (void *) GPIO_ACCEL_CS, \ .platform_data = &lis3_pdata, \ - .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \ + .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \ } #define SPI_DAC7512 \ @@ -956,7 +956,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = { static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = gpio_to_irq(GPIO_TOUCH_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 878707056e65..0fe354efb931 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = { .type = "da9034", .addr = 0x34, .platform_data = &saar_da9034_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index b6dbaca460c7..febc809ed5a6 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -92,7 +92,7 @@ static struct i2c_board_info saarb_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &saarb_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 785880f67b60..8d5168d253a9 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -907,24 +907,24 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev) gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock); /* Register interrupt handlers */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin)); } - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock)); } if (sharpsl_pm.machinfo->gpio_fatal) { - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal)); } } if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ - if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { - dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); + if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) { + dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull)); } } @@ -953,14 +953,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev) led_trigger_unregister_simple(sharpsl_charge_led_trigger); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->gpio_fatal) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); if (sharpsl_pm.machinfo->batfull_irq) - free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); + free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); gpio_free(sharpsl_pm.machinfo->gpio_batlock); gpio_free(sharpsl_pm.machinfo->gpio_batfull); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index a7f81a3fd132..abf355d0c92f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -552,7 +552,7 @@ static struct spi_board_info spitz_spi_devices[] = { .chip_select = 0, .platform_data = &spitz_ads7846_info, .controller_data = &spitz_ads7846_chip, - .irq = gpio_to_irq(SPITZ_GPIO_TP_INT), + .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", .max_speed_hz = 50000, diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 094279aefe9c..34cbdac51525 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -41,6 +42,7 @@ static int spitz_last_ac_status; static struct gpio spitz_charger_gpios[] = { { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, @@ -169,14 +171,19 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { - return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC)); + unsigned long ret; + ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + << GPIO_bit(SPITZ_GPIO_KEY_INT)) + | (!gpio_get_value(SPITZ_GPIO_SYNC) + << GPIO_bit(SPITZ_GPIO_SYNC)); + return ret; } unsigned long spitzpm_read_devdata(int type) { switch (type) { case SHARPSL_STATUS_ACIN: - return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0); + return !gpio_get_value(SPITZ_GPIO_AC_IN); case SHARPSL_STATUS_LOCK: return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock); case SHARPSL_STATUS_CHRGFULL: diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 80d7f23ad0fd..d8a2467de92e 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -376,7 +376,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .controller_data = &staccel_chip_info, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { .modalias = "cc2420", .max_speed_hz = 6500000, @@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &imote2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -560,18 +560,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, { /* IMB400 Multimedia board */ .type = "wm8940", .addr = 0x1A, @@ -661,8 +661,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_GPIO(40), - .end = IRQ_GPIO(40), + .start = PXA_GPIO_TO_IRQ(40), + .end = PXA_GPIO_TO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -707,7 +707,7 @@ static int stargate2_mci_init(struct device *dev, } gpio_direction_input(SG2_GPIO_nSD_DETECT); - err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), + err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), stargate2_detect_int, IRQ_TYPE_EDGE_BOTH, "MMC card detect", @@ -738,7 +738,7 @@ static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) static void stargate2_mci_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data); + free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data); gpio_free(SG2_SD_POWER_ENABLE); gpio_free(SG2_GPIO_nSD_DETECT); } @@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { .type = "da9030", .addr = 0x49, .platform_data = &stargate2_da9030_pdata, - .irq = gpio_to_irq(1), + .irq = PXA_GPIO_TO_IRQ(1), }, }; @@ -938,18 +938,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tsl2561", .addr = 0x49, /* Through a nand gate - Also beware, on V2 sensor board the * pull up resistors are missing. */ - .irq = IRQ_GPIO(99), + .irq = PXA_GPIO_TO_IRQ(99), }, { /* ITS400 Sensor board only */ .type = "tmp175", .addr = 0x4A, - .irq = IRQ_GPIO(96), + .irq = PXA_GPIO_TO_IRQ(96), }, }; diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 4fa36a3e383c..9fb38e80e076 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), - .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)), + .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), + .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 8a22879f0bb0..f7d9305cfd77 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = { .type = "88PM860x", .addr = 0x34, .platform_data = &evb3_pm8607_info, - .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)), + .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), }, }; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index dfe40f8705aa..7ce5c436cc4e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = { static struct resource tosa_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(TOSA_GPIO_AC_IN), - .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), + .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index afe2b7495523..023d6ca789de 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gpio_to_irq(VIPER_ETH_GPIO), - .end = gpio_to_irq(VIPER_ETH_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, [2] = { @@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* External UARTs */ { .mapbase = VIPER_UARTA_PHYS, - .irq = gpio_to_irq(VIPER_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .mapbase = VIPER_UARTB_PHYS, - .irq = gpio_to_irq(VIPER_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 1843200, .regshift = 1, @@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(VIPER_USB_GPIO), - .end = gpio_to_irq(VIPER_USB_GPIO), + .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), + .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index fed5fb088714..1f5cfa96f6d6 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -395,8 +395,8 @@ static struct resource vpac270_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), - .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -433,7 +433,7 @@ static pxa2xx_audio_ops_t vpac270_ac97_pdata = { }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { - .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ), }; static struct platform_device vpac270_ucb1400_device = { @@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = { .flags = IORESOURCE_DMA }, [3] = { /* IDE IRQ pin */ - .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), - .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ), .flags = IORESOURCE_IRQ } }; diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index d75f66ab8c34..b6476848b561 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = { .modalias = "libertas_spi", .platform_data = &z2_lbs_pdata, .controller_data = &z2_lbs_chip_info, - .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ), .max_speed_hz = 13000000, .bus_num = 1, .chip_select = 0, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 9db35a7fcfc0..a4dd1c347050 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -233,7 +233,7 @@ static struct plat_serial8250_port serial_platform_data[] = { /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */ { /* COM1 */ .mapbase = 0x10000000, - .irq = gpio_to_irq(ZEUS_UARTA_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -242,7 +242,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM2 */ .mapbase = 0x10800000, - .irq = gpio_to_irq(ZEUS_UARTB_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -251,7 +251,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM3 */ .mapbase = 0x11000000, - .irq = gpio_to_irq(ZEUS_UARTC_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -260,7 +260,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { /* COM4 */ .mapbase = 0x11800000, - .irq = gpio_to_irq(ZEUS_UARTD_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO), .irqflags = IRQF_TRIGGER_RISING, .uartclk = 14745600, .regshift = 1, @@ -321,8 +321,8 @@ static struct resource zeus_dm9k0_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = gpio_to_irq(ZEUS_ETH0_GPIO), - .end = gpio_to_irq(ZEUS_ETH0_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -339,8 +339,8 @@ static struct resource zeus_dm9k1_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = gpio_to_irq(ZEUS_ETH1_GPIO), - .end = gpio_to_irq(ZEUS_ETH1_GPIO), + .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), + .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -423,7 +423,7 @@ static struct spi_board_info zeus_spi_board_info[] = { [0] = { .modalias = "mcp2515", .platform_data = &zeus_mcp2515_pdata, - .irq = gpio_to_irq(ZEUS_CAN_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), .max_speed_hz = 1*1000*1000, .bus_num = 3, .mode = SPI_MODE_0, @@ -753,7 +753,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = { { I2C_BOARD_INFO("pca9535", 0x20), .platform_data = &zeus_pca953x_pdata[2], - .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO), + .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO), }, { I2C_BOARD_INFO("lm75a", 0x48) }, { I2C_BOARD_INFO("24c01", 0x50) }, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 7678b1bf7903..98eec80623e3 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -408,8 +408,8 @@ static void __init zylonite_init(void) * Note: We depend that the bootloader set * the correct value to MSC register for SMC91x. */ - smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); - smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq); + smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq); platform_device_register(&smc91x_device); pxa_set_ac97_info(NULL); diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 93c64d8d7de9..86e59c043de2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -231,12 +231,12 @@ static struct i2c_board_info zylonite_i2c_board_info[] = { .type = "pca9539", .addr = 0x74, .platform_data = &gpio_exp[0], - .irq = IRQ_GPIO(18), + .irq = PXA_GPIO_TO_IRQ(18), }, { .type = "pca9539", .addr = 0x75, .platform_data = &gpio_exp[1], - .irq = IRQ_GPIO(19), + .irq = PXA_GPIO_TO_IRQ(19), }, }; diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index dd8c85ef6dab..c87f6108eeb1 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -41,6 +41,11 @@ config S5P64X0_SETUP_SPI help Common setup code for SPI GPIO configurations +config S5P64X0_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + # machine support config MACH_SMDK6440 @@ -50,12 +55,16 @@ config MACH_SMDK6440 select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6440 @@ -66,13 +75,28 @@ config MACH_SMDK6450 select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 + select S5P64X0_SETUP_SDHCI_GPIO help Machine support for the Samsung SMDK6450 +menu "Use 8-bit SDHCI bus width" + +config S5P64X0_SD_CH1_8BIT + bool "SDHCI Channel 1 (Slot 1)" + depends on MACH_SMDK6450 || MACH_SMDK6440 + help + Support SDHCI Channel 1 8-bit bus. + If selected, Channel 2 is disabled. + +endmenu + endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index e167ca136f5d..12bb951187a4 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -33,3 +33,4 @@ obj-y += setup-i2c0.o obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 925d2daa60c7..ee1e8e7f5631 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -380,36 +380,6 @@ static struct clksrc_sources clkset_audio = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { .name = "sclk_post", .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, @@ -447,6 +417,42 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, +}; + static struct clksrc_clk clk_sclk_uclk = { .clk = { .name = "uclk1", @@ -504,6 +510,9 @@ static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_uclk, &clk_sclk_spi0, &clk_sclk_spi1, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2 }; static struct clk_lookup s5p6440_clk_lookup[] = { @@ -512,6 +521,9 @@ static struct clk_lookup s5p6440_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), }; void __init_or_cpufreq s5p6440_setup_clocks(void) diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index c390a59f68ac..dae6a13f43bb 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -414,36 +414,6 @@ static struct clksrc_clk clk_sclk_audio0 = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 24), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 25), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_mmc", - .devname = "s3c-sdhci.2", - .ctrlbit = (1 << 26), - .enable = s5p64x0_sclk_ctrl, - }, - .sources = &clkset_group2, - .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { .name = "sclk_fimc", .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, @@ -508,6 +478,42 @@ static struct clksrc_clk clksrcs[] = { }, }; +static struct clksrc_clk clk_sclk_mmc0 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.0", + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc1 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.1", + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, +}; + +static struct clksrc_clk clk_sclk_mmc2 = { + .clk = { + .name = "sclk_mmc", + .devname = "s3c-sdhci.2", + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, +}; + static struct clksrc_clk clk_sclk_uclk = { .clk = { .name = "uclk1", @@ -547,6 +553,9 @@ static struct clksrc_clk *clksrc_cdev[] = { &clk_sclk_uclk, &clk_sclk_spi0, &clk_sclk_spi1, + &clk_sclk_mmc0, + &clk_sclk_mmc1, + &clk_sclk_mmc2, }; static struct clk_lookup s5p6450_clk_lookup[] = { @@ -555,6 +564,9 @@ static struct clk_lookup s5p6450_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), + CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), + CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), }; /* Clock initialization code */ diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 0d50e79fb9fc..52b89a376447 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -40,6 +40,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> +#include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> #include <plat/gpio-cfg.h> @@ -181,6 +182,10 @@ void __init s5p6440_map_io(void) s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s5p64x0_default_sdhci0(); + s5p64x0_default_sdhci1(); + s5p6440_default_sdhci2(); + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); init_consistent_dma_size(SZ_8M); } @@ -191,6 +196,10 @@ void __init s5p6450_map_io(void) s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s5p64x0_default_sdhci0(); + s5p64x0_default_sdhci1(); + s5p6450_default_sdhci2(); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); init_consistent_dma_size(SZ_8M); } diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 34d98a1dae57..a40e325d62c8 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/pwm_backlight.h> #include <linux/fb.h> +#include <linux/mmc/host.h> #include <video/platform_lcd.h> @@ -52,6 +53,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/regs-fb.h> +#include <plat/sdhci.h> #include "common.h" @@ -163,6 +165,25 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s5p6440_device_iis, &s3c_device_fb, &smdk6440_lcd_lte480wv, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, +#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -236,6 +257,10 @@ static void __init smdk6440_machine_init(void) s5p6440_set_lcd_interface(); s3c_fb_set_platdata(&smdk6440_lcd_pdata); + s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 135cf5d84737..efb69e2f2afe 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/pwm_backlight.h> #include <linux/fb.h> +#include <linux/mmc/host.h> #include <video/platform_lcd.h> @@ -52,6 +53,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/regs-fb.h> +#include <plat/sdhci.h> #include "common.h" @@ -181,10 +183,28 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s5p6450_device_iis0, &s3c_device_fb, &smdk6450_lcd_lte480wv, - + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, /* s5p6450_device_spi0 will be added */ }; +static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + +static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +#if defined(CONFIG_S5P64X0_SD_CH1_8BIT) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_NONE, +}; + static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { .flags = 0, .slave_addr = 0x10, @@ -256,6 +276,10 @@ static void __init smdk6450_machine_init(void) s5p6450_set_lcd_interface(); s3c_fb_set_platdata(&smdk6450_lcd_pdata); + s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata); + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); } diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c new file mode 100644 index 000000000000..8410af0d12bf --- /dev/null +++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c @@ -0,0 +1,104 @@ +/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#include <plat/gpio-cfg.h> +#include <plat/sdhci.h> +#include <plat/cpu.h> + +void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set all the necessary GPG pins to special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width, + S3C_GPIO_SFN(2)); + + /* Set GPG[6] pin to special-function 2 - MMC0 CDn */ + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + if (soc_is_s5p6450()) { + s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2)); + } else { + s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2)); + } + } +} + +void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + + /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2)); + + switch (width) { + case 8: + /* Set data pins GPH[6:9] special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, + S3C_GPIO_SFN(2)); + case 4: + /* set data pins GPH[2:5] special-function 2 */ + if (soc_is_s5p6450()) + s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4, + S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4, + S3C_GPIO_SFN(2)); + default: + break; + } + + /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */ + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + if (soc_is_s5p6450()) { + s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3)); + } else { + s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3)); + } + } +} + +void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */ + s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3)); + + /* Set data pins GPH[6:9] pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3)); +} + +void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + /* Set all the necessary GPG pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index dab3c6347a8f..d6df9f6c9f7e 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,17 +11,39 @@ #include <linux/clk.h> #include <linux/spinlock.h> #include <linux/mutex.h> +#include <linux/io.h> +#include <linux/clkdev.h> #include <mach/hardware.h> -/* - * Very simple clock implementation - we only have one clock to deal with. - */ +struct clkops { + void (*enable)(struct clk *); + void (*disable)(struct clk *); + unsigned long (*getrate)(struct clk *); +}; + struct clk { + const struct clkops *ops; + unsigned long rate; unsigned int enabled; }; -static void clk_gpio27_enable(void) +#define INIT_CLKREG(_clk, _devname, _conname) \ + { \ + .clk = _clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } + +#define DEFINE_CLK(_name, _ops, _rate) \ +struct clk clk_##_name = { \ + .ops = _ops, \ + .rate = _rate, \ + } + +static DEFINE_SPINLOCK(clocks_lock); + +static void clk_gpio27_enable(struct clk *clk) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -32,38 +54,22 @@ static void clk_gpio27_enable(void) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(void) +static void clk_gpio27_disable(struct clk *clk) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } -static struct clk clk_gpio27; - -static DEFINE_SPINLOCK(clocks_lock); - -struct clk *clk_get(struct device *dev, const char *id) -{ - const char *devname = dev_name(dev); - - return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - int clk_enable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk_gpio27_enable(); + clk->ops->enable(clk); spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); @@ -76,13 +82,48 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk_gpio27_disable(); + clk->ops->disable(clk); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return 3686400; + unsigned long rate; + + rate = clk->rate; + if (clk->ops->getrate) + rate = clk->ops->getrate(clk); + + return rate; } EXPORT_SYMBOL(clk_get_rate); + +const struct clkops clk_gpio27_ops = { + .enable = clk_gpio27_enable, + .disable = clk_gpio27_disable, +}; + +static void clk_dummy_enable(struct clk *clk) { } +static void clk_dummy_disable(struct clk *clk) { } + +const struct clkops clk_dummy_ops = { + .enable = clk_dummy_enable, + .disable = clk_dummy_disable, +}; + +static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400); +static DEFINE_CLK(dummy, &clk_dummy_ops, 0); + +static struct clk_lookup sa11xx_clkregs[] = { + INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), +}; + +static int __init sa11xx_clk_init(void) +{ + clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); + return 0; +} + +postcore_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index bb10ee2cb89f..480d2ea46b00 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -345,9 +345,29 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } +static struct resource sa11x0rtc_resources[] = { + [0] = { + .start = 0x90010000, + .end = 0x900100ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, + .resource = sa11x0rtc_resources, + .num_resources = ARRAY_SIZE(sa11x0rtc_resources), }; static struct platform_device *sa11x0_devices[] __initdata = { diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 94cf70afb236..f75946c3293d 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -96,6 +96,7 @@ struct omap_mmc_platform_data { */ u8 wires; /* Used for the MMC driver on omap1 and 2420 */ u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ /* * nomux means "standard" muxing is wrong on this board, and diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index c616385f27bd..dc864b580da0 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -100,9 +100,6 @@ extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern int omap_usbhs_enable(struct device *dev); -extern void omap_usbhs_disable(struct device *dev); - extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h deleted file mode 100644 index b6390beff323..000000000000 --- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __PLAT_PXA_GPIO_H -#define __PLAT_PXA_GPIO_H - -struct irq_data; - -/* - * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with - * one set of registers. The register offsets are organized below: - * - * GPLR GPDR GPSR GPCR GRER GFER GEDR - * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 - * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C - * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 - * - * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 - * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C - * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 - * - * NOTE: - * BANK 3 is only available on PXA27x and later processors. - * BANK 4 and 5 are only available on PXA935 - */ - -#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space, the - * actual number of the last GPIO is recorded by 'pxa_last_gpio'. - */ -extern int pxa_last_gpio; - -typedef int (*set_wake_t)(struct irq_data *d, unsigned int on); - -extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); - -#endif /* __PLAT_PXA_GPIO_H */ diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h deleted file mode 100644 index 258f77210b02..000000000000 --- a/arch/arm/plat-pxa/include/plat/gpio.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __PLAT_GPIO_H -#define __PLAT_GPIO_H - -#define __ARM_GPIOLIB_COMPLEX - -/* The individual machine provides register offsets and NR_BUILTIN_GPIO */ -#include <mach/gpio-pxa.h> - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 83b1e31696d9..4214ea0ff8fe 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -123,6 +123,7 @@ extern struct platform_device exynos4_device_dwmci; extern struct platform_device exynos4_device_i2s0; extern struct platform_device exynos4_device_i2s1; extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_ohci; extern struct platform_device exynos4_device_pcm0; extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index dcff7dd1ae8a..656dc00d30ed 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -123,6 +123,10 @@ extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ @@ -146,6 +150,7 @@ static inline void s3c2416_default_sdhci0(void) { } static inline void s3c2416_default_sdhci1(void) { } #endif /* CONFIG_S3C2416_SETUP_SDHCI */ + /* S3C64XX SDHCI setup */ #ifdef CONFIG_S3C64XX_SETUP_SDHCI @@ -201,6 +206,45 @@ static inline void s3c6400_default_sdhci2(void) { } #endif /* CONFIG_S3C64XX_SETUP_SDHCI */ +/* S5P64X0 SDHCI setup */ + +#ifdef CONFIG_S5P64X0_SETUP_SDHCI +static inline void s5p64x0_default_sdhci0(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC + s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio; +#endif +} + +static inline void s5p64x0_default_sdhci1(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC1 + s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio; +#endif +} + +static inline void s5p6440_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio; +#endif +} + +static inline void s5p6450_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio; +#endif +} + +#else +static inline void s5p64x0_default_sdhci0(void) { } +static inline void s5p64x0_default_sdhci1(void) { } +static inline void s5p6440_default_sdhci2(void) { } +static inline void s5p6450_default_sdhci2(void) { } + +#endif /* CONFIG_S5P64X0_SETUP_SDHCI */ + /* S5PC100 SDHCI setup */ #ifdef CONFIG_S5PC100_SETUP_SDHCI |
