diff options
author | Benjamin Romer <benjamin.romer@unisys.com> | 2007-02-13 13:26:25 +0100 |
---|---|---|
committer | Andi Kleen <andi@basil.nowhere.org> | 2007-02-13 13:26:25 +0100 |
commit | ee4eff6ff6cbfc8ce38131058a18802bf6206879 (patch) | |
tree | 7cb9e7f7072fee788284c099f6f3f229bfefc20a /arch/x86_64 | |
parent | a4af60aa64c828b7c047e7a67b2f896d4bfbd700 (diff) | |
download | blackbird-op-linux-ee4eff6ff6cbfc8ce38131058a18802bf6206879.tar.gz blackbird-op-linux-ee4eff6ff6cbfc8ce38131058a18802bf6206879.zip |
[PATCH] x86-64: update IO-APIC dest field to 8-bit for xAPIC
On the Unisys ES7000/ONE system, we encountered a problem where performing
a kexec reboot or dump on any cell other than cell 0 causes the system
timer to stop working, resulting in a hang during timer calibration in the
new kernel.
We traced the problem to one line of code in disable_IO_APIC(), which needs
to restore the timer's IO-APIC configuration before rebooting. The code is
currently using the 4-bit physical destination field, rather than using the
8-bit logical destination field, and it cuts off the upper 4 bits of the
timer's APIC ID. If we change this to use the logical destination field,
the timer works and we can kexec on the upper cells. This was tested on
two different cells (0 and 2) in an ES7000/ONE system.
For reference, the relevant Intel xAPIC spec is kept at
ftp://download.intel.com/design/chipsets/e8501/datashts/30962001.pdf,
specifically on page 334.
Signed-off-by: Benjamin M Romer <benjamin.romer@unisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Diffstat (limited to 'arch/x86_64')
-rw-r--r-- | arch/x86_64/kernel/io_apic.c | 24 |
1 files changed, 11 insertions, 13 deletions
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 6be6730acb5c..566e64d966c4 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -831,7 +831,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.trigger = irq_trigger(idx); entry.polarity = irq_polarity(idx); @@ -839,7 +839,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (irq_trigger(idx)) { entry.trigger = 1; entry.mask = 1; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); } if (!apic && !IO_APIC_IRQ(irq)) @@ -851,7 +851,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (vector < 0) return; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); @@ -920,7 +920,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in */ entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; entry.trigger = 0; @@ -1020,18 +1020,17 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG ".... IRQ redirection table:\n"); - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); - printk(KERN_DEBUG " %02x %03X %02X ", + printk(KERN_DEBUG " %02x %03X ", i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest + entry.dest ); printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", @@ -1293,8 +1292,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); + entry.dest = GET_APIC_ID(apic_read(APIC_ID)); /* * Add it to the IO-APIC irq-routing table: @@ -1556,7 +1554,7 @@ static inline void unlock_ExtINT_logic(void) entry1.dest_mode = 0; /* physical delivery */ entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = 0; @@ -2131,7 +2129,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.trigger = triggering; entry.polarity = polarity; entry.mask = 1; /* Disabled (masked) */ |