x86_64: move pci

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

5 files changed, 1 insertions, 273 deletions

diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index d322592e38ab..c10c8233a893 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -79,7 +79,7 @@ core-y					+= arch/x86_64/kernel/ \
 					   arch/x86/crypto/ \
 					   arch/x86/vdso/
 core-$(CONFIG_IA32_EMULATION)		+= arch/x86_64/ia32/
-drivers-$(CONFIG_PCI)			+= arch/x86_64/pci/
+drivers-$(CONFIG_PCI)			+= arch/x86/pci/
 drivers-$(CONFIG_OPROFILE)		+= arch/x86/oprofile/
 
 boot := arch/x86_64/boot
diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile
deleted file mode 100644
index b3e54c45d408..000000000000
--- a/arch/x86_64/pci/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/pci/Makefile_32
-else
-include ${srctree}/arch/x86_64/pci/Makefile_64
-endif
diff --git a/arch/x86_64/pci/Makefile_64 b/arch/x86_64/pci/Makefile_64
deleted file mode 100644
index 79b618b9e9d4..000000000000
--- a/arch/x86_64/pci/Makefile_64
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Makefile for X86_64 specific PCI routines
-#
-# Reuse the i386 PCI subsystem
-#
-EXTRA_CFLAGS += -Iarch/x86/pci
-
-obj-y		:= i386.o
-obj-$(CONFIG_PCI_DIRECT)+= direct.o
-obj-y		+= fixup.o init.o
-obj-$(CONFIG_ACPI)	+= acpi.o
-obj-y			+= legacy.o irq.o common.o early.o
-# mmconfig has a 64bit special
-obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
-
-obj-$(CONFIG_NUMA)	+= k8-bus_64.o
-
-direct-y += ../../x86/pci/direct.o
-acpi-y   += ../../x86/pci/acpi.o
-legacy-y += ../../x86/pci/legacy.o
-irq-y    += ../../x86/pci/irq.o
-common-y += ../../x86/pci/common.o
-fixup-y  += ../../x86/pci/fixup.o
-i386-y  += ../../x86/pci/i386.o
-init-y += ../../x86/pci/init.o
-early-y += ../../x86/pci/early.o
-mmconfig-shared-y += ../../x86/pci/mmconfig-shared.o
diff --git a/arch/x86_64/pci/k8-bus_64.c b/arch/x86_64/pci/k8-bus_64.c
deleted file mode 100644
index 9cc813e29706..000000000000
--- a/arch/x86_64/pci/k8-bus_64.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/mpspec.h>
-#include <linux/cpumask.h>
-
-/*
- * This discovers the pcibus <-> node mapping on AMD K8.
- *
- * RED-PEN need to call this again on PCI hotplug
- * RED-PEN empty cpus get reported wrong
- */
-
-#define NODE_ID_REGISTER 0x60
-#define NODE_ID(dword) (dword & 0x07)
-#define LDT_BUS_NUMBER_REGISTER_0 0x94
-#define LDT_BUS_NUMBER_REGISTER_1 0xB4
-#define LDT_BUS_NUMBER_REGISTER_2 0xD4
-#define NR_LDT_BUS_NUMBER_REGISTERS 3
-#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF)
-#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
-#define PCI_DEVICE_ID_K8HTCONFIG 0x1100
-
-/**
- * fill_mp_bus_to_cpumask()
- * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
- * Registers found in the K8 northbridge
- */
-__init static int
-fill_mp_bus_to_cpumask(void)
-{
-	struct pci_dev *nb_dev = NULL;
-	int i, j;
-	u32 ldtbus, nid;
-	static int lbnr[3] = {
-		LDT_BUS_NUMBER_REGISTER_0,
-		LDT_BUS_NUMBER_REGISTER_1,
-		LDT_BUS_NUMBER_REGISTER_2
-	};
-
-	while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-			PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) {
-		pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid);
-
-		for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
-			pci_read_config_dword(nb_dev, lbnr[i], &ldtbus);
-			/*
-			 * if there are no busses hanging off of the current
-			 * ldt link then both the secondary and subordinate
-			 * bus number fields are set to 0.
-			 * 
-			 * RED-PEN
-			 * This is slightly broken because it assumes
- 			 * HT node IDs == Linux node ids, which is not always
-			 * true. However it is probably mostly true.
-			 */
-			if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
-				&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
-				for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
-				     j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
-				     j++) { 
-					struct pci_bus *bus;
-					struct pci_sysdata *sd;
-
-					long node = NODE_ID(nid);
-					/* Algorithm a bit dumb, but
- 					   it shouldn't matter here */
-					bus = pci_find_bus(0, j);
-					if (!bus)
-						continue;
-					if (!node_online(node))
-						node = 0;
-
-					sd = bus->sysdata;
-					sd->node = node;
-				}		
-			}
-		}
-	}
-
-	return 0;
-}
-
-fs_initcall(fill_mp_bus_to_cpumask);
diff --git a/arch/x86_64/pci/mmconfig_64.c b/arch/x86_64/pci/mmconfig_64.c
deleted file mode 100644
index 4095e4d66a1d..000000000000
--- a/arch/x86_64/pci/mmconfig_64.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- *
- * This is an 64bit optimized version that always keeps the full mmconfig
- * space mapped. This allows lockless config space operation.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/bitmap.h>
-#include <asm/e820.h>
-
-#include "pci.h"
-
-/* Static virtual mapping of the MMCONFIG aperture */
-struct mmcfg_virt {
-	struct acpi_mcfg_allocation *cfg;
-	char __iomem *virt;
-};
-static struct mmcfg_virt *pci_mmcfg_virt;
-
-static char __iomem *get_virt(unsigned int seg, unsigned bus)
-{
-	struct acpi_mcfg_allocation *cfg;
-	int cfg_num;
-
-	for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
-		cfg = pci_mmcfg_virt[cfg_num].cfg;
-		if (cfg->pci_segment == seg &&
-		    (cfg->start_bus_number <= bus) &&
-		    (cfg->end_bus_number >= bus))
-			return pci_mmcfg_virt[cfg_num].virt;
-	}
-
-	/* Fall back to type 0 */
-	return NULL;
-}
-
-static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
-{
-	char __iomem *addr;
-	if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
-		test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
-		return NULL;
-	addr = get_virt(seg, bus);
-	if (!addr)
-		return NULL;
- 	return addr + ((bus << 20) | (devfn << 12));
-}
-
-static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
-			  unsigned int devfn, int reg, int len, u32 *value)
-{
-	char __iomem *addr;
-
-	/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
-	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
-		*value = -1;
-		return -EINVAL;
-	}
-
-	addr = pci_dev_base(seg, bus, devfn);
-	if (!addr)
-		return pci_conf1_read(seg,bus,devfn,reg,len,value);
-
-	switch (len) {
-	case 1:
-		*value = mmio_config_readb(addr + reg);
-		break;
-	case 2:
-		*value = mmio_config_readw(addr + reg);
-		break;
-	case 4:
-		*value = mmio_config_readl(addr + reg);
-		break;
-	}
-
-	return 0;
-}
-
-static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
-			   unsigned int devfn, int reg, int len, u32 value)
-{
-	char __iomem *addr;
-
-	/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
-	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
-		return -EINVAL;
-
-	addr = pci_dev_base(seg, bus, devfn);
-	if (!addr)
-		return pci_conf1_write(seg,bus,devfn,reg,len,value);
-
-	switch (len) {
-	case 1:
-		mmio_config_writeb(addr + reg, value);
-		break;
-	case 2:
-		mmio_config_writew(addr + reg, value);
-		break;
-	case 4:
-		mmio_config_writel(addr + reg, value);
-		break;
-	}
-
-	return 0;
-}
-
-static struct pci_raw_ops pci_mmcfg = {
-	.read =		pci_mmcfg_read,
-	.write =	pci_mmcfg_write,
-};
-
-static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
-{
-	void __iomem *addr;
-	u32 size;
-
-	size = (cfg->end_bus_number + 1) << 20;
-	addr = ioremap_nocache(cfg->address, size);
-	if (addr) {
-		printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
-		       cfg->address, cfg->address + size - 1);
-	}
-	return addr;
-}
-
-int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
-				    unsigned int devfn)
-{
-	return pci_dev_base(seg, bus, devfn) != NULL;
-}
-
-int __init pci_mmcfg_arch_init(void)
-{
-	int i;
-	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
-				 pci_mmcfg_config_num, GFP_KERNEL);
-	if (pci_mmcfg_virt == NULL) {
-		printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
-		return 0;
-	}
-
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
-		if (!pci_mmcfg_virt[i].virt) {
-			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
-					"segment %d\n",
-				pci_mmcfg_config[i].pci_segment);
-			return 0;
-		}
-	}
-	raw_pci_ops = &pci_mmcfg;
-	return 1;
-}