Merge branch 'linus' into x86/pebs

Conflicts:

	arch/x86/Kconfig.cpu
	arch/x86/kernel/cpu/intel.c
	arch/x86/kernel/setup_64.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 586 insertions, 0 deletions

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
new file mode 100644
index 000000000000..dbf532369711
--- /dev/null
+++ b/arch/x86/pci/amd_bus.c
@@ -0,0 +1,586 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/topology.h>
+#include "pci.h"
+
+#ifdef CONFIG_X86_64
+#include <asm/pci-direct.h>
+#include <asm/mpspec.h>
+#include <linux/cpumask.h>
+#endif
+
+/*
+ * This discovers the pcibus <-> node mapping on AMD K8.
+ * also get peer root bus resource for io,mmio
+ */
+
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+		mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node = -1;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return node;
+
+	node = mp_bus_to_node[busnum];
+
+	/*
+	 * let numa_node_id to decide it later in dma_alloc_pages
+	 * if there is no ram on that node
+	 */
+	if (node != -1 && !node_online(node))
+		node = -1;
+
+	return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR];
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from root,
+ * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+	char name[12];
+	unsigned int res_num;
+	struct resource res[RES_NUM];
+	int bus_min;
+	int bus_max;
+	int node;
+	int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+static int pci_root_num;
+static struct pci_root_info pci_root_info[PCI_ROOT_NR];
+
+void set_pci_bus_resources_arch_default(struct pci_bus *b)
+{
+	int i;
+	int j;
+	struct pci_root_info *info;
+
+	/* if only one root bus, don't need to anything */
+	if (pci_root_num < 2)
+		return;
+
+	for (i = 0; i < pci_root_num; i++) {
+		if (pci_root_info[i].bus_min == b->number)
+			break;
+	}
+
+	if (i == pci_root_num)
+		return;
+
+	info = &pci_root_info[i];
+	for (j = 0; j < info->res_num; j++) {
+		struct resource *res;
+		struct resource *root;
+
+		res = &info->res[j];
+		b->resource[j] = res;
+		if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			root = &iomem_resource;
+		insert_resource(root, res);
+	}
+}
+
+#define RANGE_NUM 16
+
+struct res_range {
+	size_t start;
+	size_t end;
+};
+
+static void __init update_range(struct res_range *range, size_t start,
+				size_t end)
+{
+	int i;
+	int j;
+
+	for (j = 0; j < RANGE_NUM; j++) {
+		if (!range[j].end)
+			continue;
+
+		if (start <= range[j].start && end >= range[j].end) {
+			range[j].start = 0;
+			range[j].end = 0;
+			continue;
+		}
+
+		if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) {
+			range[j].start = end + 1;
+			continue;
+		}
+
+
+		if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) {
+			range[j].end = start - 1;
+			continue;
+		}
+
+		if (start > range[j].start && end < range[j].end) {
+			/* find the new spare */
+			for (i = 0; i < RANGE_NUM; i++) {
+				if (range[i].end == 0)
+					break;
+			}
+			if (i < RANGE_NUM) {
+				range[i].end = range[j].end;
+				range[i].start = end + 1;
+			} else {
+				printk(KERN_ERR "run of slot in ranges\n");
+			}
+			range[j].end = start - 1;
+			continue;
+		}
+	}
+}
+
+static void __init update_res(struct pci_root_info *info, size_t start,
+			      size_t end, unsigned long flags, int merge)
+{
+	int i;
+	struct resource *res;
+
+	if (!merge)
+		goto addit;
+
+	/* try to merge it with old one */
+	for (i = 0; i < info->res_num; i++) {
+		size_t final_start, final_end;
+		size_t common_start, common_end;
+
+		res = &info->res[i];
+		if (res->flags != flags)
+			continue;
+
+		common_start = max((size_t)res->start, start);
+		common_end = min((size_t)res->end, end);
+		if (common_start > common_end + 1)
+			continue;
+
+		final_start = min((size_t)res->start, start);
+		final_end = max((size_t)res->end, end);
+
+		res->start = final_start;
+		res->end = final_end;
+		return;
+	}
+
+addit:
+
+	/* need to add that */
+	if (info->res_num >= RES_NUM)
+		return;
+
+	res = &info->res[info->res_num];
+	res->name = info->name;
+	res->flags = flags;
+	res->start = start;
+	res->end = end;
+	res->child = NULL;
+	info->res_num++;
+}
+
+struct pci_hostbridge_probe {
+	u32 bus;
+	u32 slot;
+	u32 vendor;
+	u32 device;
+};
+
+static struct pci_hostbridge_probe pci_probes[] __initdata = {
+	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
+	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
+	{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
+	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
+};
+
+static u64 __initdata fam10h_mmconf_start;
+static u64 __initdata fam10h_mmconf_end;
+static void __init get_pci_mmcfg_amd_fam10h_range(void)
+{
+	u32 address;
+	u64 base, msr;
+	unsigned segn_busn_bits;
+
+	/* assume all cpus from fam10h have mmconf */
+        if (boot_cpu_data.x86 < 0x10)
+		return;
+
+	address = MSR_FAM10H_MMIO_CONF_BASE;
+	rdmsrl(address, msr);
+
+	/* mmconfig is not enable */
+	if (!(msr & FAM10H_MMIO_CONF_ENABLE))
+		return;
+
+	base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+
+	segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
+			 FAM10H_MMIO_CONF_BUSRANGE_MASK;
+
+	fam10h_mmconf_start = base;
+	fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+}
+
+/**
+ * early_fill_mp_bus_to_node()
+ * called before pcibios_scan_root and pci_scan_bus
+ * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
+ * Registers found in the K8 northbridge
+ */
+static int __init early_fill_mp_bus_info(void)
+{
+	int i;
+	int j;
+	unsigned bus;
+	unsigned slot;
+	int found;
+	int node;
+	int link;
+	int def_node;
+	int def_link;
+	struct pci_root_info *info;
+	u32 reg;
+	struct resource *res;
+	size_t start;
+	size_t end;
+	struct res_range range[RANGE_NUM];
+	u64 val;
+	u32 address;
+
+#ifdef CONFIG_NUMA
+	for (i = 0; i < BUS_NR; i++)
+		mp_bus_to_node[i] = -1;
+#endif
+
+	if (!early_pci_allowed())
+		return -1;
+
+	found = 0;
+	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
+		u32 id;
+		u16 device;
+		u16 vendor;
+
+		bus = pci_probes[i].bus;
+		slot = pci_probes[i].slot;
+		id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
+
+		vendor = id & 0xffff;
+		device = (id>>16) & 0xffff;
+		if (pci_probes[i].vendor == vendor &&
+		    pci_probes[i].device == device) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		return 0;
+
+	pci_root_num = 0;
+	for (i = 0; i < 4; i++) {
+		int min_bus;
+		int max_bus;
+		reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
+
+		/* Check if that register is enabled for bus range */
+		if ((reg & 7) != 3)
+			continue;
+
+		min_bus = (reg >> 16) & 0xff;
+		max_bus = (reg >> 24) & 0xff;
+		node = (reg >> 4) & 0x07;
+#ifdef CONFIG_NUMA
+		for (j = min_bus; j <= max_bus; j++)
+			mp_bus_to_node[j] = (unsigned char) node;
+#endif
+		link = (reg >> 8) & 0x03;
+
+		info = &pci_root_info[pci_root_num];
+		info->bus_min = min_bus;
+		info->bus_max = max_bus;
+		info->node = node;
+		info->link = link;
+		sprintf(info->name, "PCI Bus #%02x", min_bus);
+		pci_root_num++;
+	}
+
+	/* get the default node and link for left over res */
+	reg = read_pci_config(bus, slot, 0, 0x60);
+	def_node = (reg >> 8) & 0x07;
+	reg = read_pci_config(bus, slot, 0, 0x64);
+	def_link = (reg >> 8) & 0x03;
+
+	memset(range, 0, sizeof(range));
+	range[0].end = 0xffff;
+	/* io port resource */
+	for (i = 0; i < 4; i++) {
+		reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
+		if (!(reg & 3))
+			continue;
+
+		start = reg & 0xfff000;
+		reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3));
+		node = reg & 0x07;
+		link = (reg >> 4) & 0x03;
+		end = (reg & 0xfff000) | 0xfff;
+
+		/* find the position */
+		for (j = 0; j < pci_root_num; j++) {
+			info = &pci_root_info[j];
+			if (info->node == node && info->link == link)
+				break;
+		}
+		if (j == pci_root_num)
+			continue; /* not found */
+
+		info = &pci_root_info[j];
+		printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
+		       node, link, (u64)start, (u64)end);
+
+		/* kernel only handle 16 bit only */
+		if (end > 0xffff)
+			end = 0xffff;
+		update_res(info, start, end, IORESOURCE_IO, 1);
+		update_range(range, start, end);
+	}
+	/* add left over io port range to def node/link, [0, 0xffff] */
+	/* find the position */
+	for (j = 0; j < pci_root_num; j++) {
+		info = &pci_root_info[j];
+		if (info->node == def_node && info->link == def_link)
+			break;
+	}
+	if (j < pci_root_num) {
+		info = &pci_root_info[j];
+		for (i = 0; i < RANGE_NUM; i++) {
+			if (!range[i].end)
+				continue;
+
+			update_res(info, range[i].start, range[i].end,
+				   IORESOURCE_IO, 1);
+		}
+	}
+
+	memset(range, 0, sizeof(range));
+	/* 0xfd00000000-0xffffffffff for HT */
+	range[0].end = (0xfdULL<<32) - 1;
+
+	/* need to take out [0, TOM) for RAM*/
+	address = MSR_K8_TOP_MEM1;
+	rdmsrl(address, val);
+	end = (val & 0xffffff800000ULL);
+	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+	if (end < (1ULL<<32))
+		update_range(range, 0, end - 1);
+
+	/* get mmconfig */
+	get_pci_mmcfg_amd_fam10h_range();
+	/* need to take out mmconf range */
+	if (fam10h_mmconf_end) {
+		printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
+		update_range(range, fam10h_mmconf_start, fam10h_mmconf_end);
+	}
+
+	/* mmio resource */
+	for (i = 0; i < 8; i++) {
+		reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
+		if (!(reg & 3))
+			continue;
+
+		start = reg & 0xffffff00; /* 39:16 on 31:8*/
+		start <<= 8;
+		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
+		node = reg & 0x07;
+		link = (reg >> 4) & 0x03;
+		end = (reg & 0xffffff00);
+		end <<= 8;
+		end |= 0xffff;
+
+		/* find the position */
+		for (j = 0; j < pci_root_num; j++) {
+			info = &pci_root_info[j];
+			if (info->node == node && info->link == link)
+				break;
+		}
+		if (j == pci_root_num)
+			continue; /* not found */
+
+		info = &pci_root_info[j];
+
+		printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
+		       node, link, (u64)start, (u64)end);
+		/*
+		 * some sick allocation would have range overlap with fam10h
+		 * mmconf range, so need to update start and end.
+		 */
+		if (fam10h_mmconf_end) {
+			int changed = 0;
+			u64 endx = 0;
+			if (start >= fam10h_mmconf_start &&
+			    start <= fam10h_mmconf_end) {
+				start = fam10h_mmconf_end + 1;
+				changed = 1;
+			}
+
+			if (end >= fam10h_mmconf_start &&
+			    end <= fam10h_mmconf_end) {
+				end = fam10h_mmconf_start - 1;
+				changed = 1;
+			}
+
+			if (start < fam10h_mmconf_start &&
+			    end > fam10h_mmconf_end) {
+				/* we got a hole */
+				endx = fam10h_mmconf_start - 1;
+				update_res(info, start, endx, IORESOURCE_MEM, 0);
+				update_range(range, start, endx);
+				printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
+				start = fam10h_mmconf_end + 1;
+				changed = 1;
+			}
+			if (changed) {
+				if (start <= end) {
+					printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
+				} else {
+					printk(KERN_CONT "%s\n", endx?"":" ==> none");
+					continue;
+				}
+			}
+		}
+
+		update_res(info, start, end, IORESOURCE_MEM, 1);
+		update_range(range, start, end);
+		printk(KERN_CONT "\n");
+	}
+
+	/* need to take out [4G, TOM2) for RAM*/
+	/* SYS_CFG */
+	address = MSR_K8_SYSCFG;
+	rdmsrl(address, val);
+	/* TOP_MEM2 is enabled? */
+	if (val & (1<<21)) {
+		/* TOP_MEM2 */
+		address = MSR_K8_TOP_MEM2;
+		rdmsrl(address, val);
+		end = (val & 0xffffff800000ULL);
+		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
+		update_range(range, 1ULL<<32, end - 1);
+	}
+
+	/*
+	 * add left over mmio range to def node/link ?
+	 * that is tricky, just record range in from start_min to 4G
+	 */
+	for (j = 0; j < pci_root_num; j++) {
+		info = &pci_root_info[j];
+		if (info->node == def_node && info->link == def_link)
+			break;
+	}
+	if (j < pci_root_num) {
+		info = &pci_root_info[j];
+
+		for (i = 0; i < RANGE_NUM; i++) {
+			if (!range[i].end)
+				continue;
+
+			update_res(info, range[i].start, range[i].end,
+				   IORESOURCE_MEM, 1);
+		}
+	}
+
+	for (i = 0; i < pci_root_num; i++) {
+		int res_num;
+		int busnum;
+
+		info = &pci_root_info[i];
+		res_num = info->res_num;
+		busnum = info->bus_min;
+		printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
+		       info->bus_min, info->bus_max, info->node, info->link);
+		for (j = 0; j < res_num; j++) {
+			res = &info->res[j];
+			printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
+			       busnum, j,
+			       (res->flags & IORESOURCE_IO)?"io port":"mmio",
+			       res->start, res->end);
+		}
+	}
+
+	return 0;
+}
+
+postcore_initcall(early_fill_mp_bus_info);
+
+#endif
+
+/* common 32/64 bit code */
+
+#define ENABLE_CF8_EXT_CFG      (1ULL << 46)
+
+static void enable_pci_io_ecs_per_cpu(void *unused)
+{
+	u64 reg;
+	rdmsrl(MSR_AMD64_NB_CFG, reg);
+	if (!(reg & ENABLE_CF8_EXT_CFG)) {
+		reg |= ENABLE_CF8_EXT_CFG;
+		wrmsrl(MSR_AMD64_NB_CFG, reg);
+	}
+}
+
+static int __init enable_pci_io_ecs(void)
+{
+	/* assume all cpus from fam10h have IO ECS */
+        if (boot_cpu_data.x86 < 0x10)
+		return 0;
+	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+	pci_probe |= PCI_HAS_IO_ECS;
+	return 0;
+}
+
+postcore_initcall(enable_pci_io_ecs);