i386: move mach-default

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
new file mode 100644
index 000000000000..7f635c7a2381
--- /dev/null
+++ b/arch/x86/mach-default/setup.c
@@ -0,0 +1,180 @@
+/*
+ *	Machine specific setup for generic
+ */
+
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define DEFAULT_SEND_IPI	(1)
+#else
+#define DEFAULT_SEND_IPI	(0)
+#endif
+
+int no_broadcast=DEFAULT_SEND_IPI;
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+	init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *	Fill in any interrupts that may have been left out by the general
+ *	init_IRQ() routine.  interrupts having to do with the machine rather
+ *	than the devices on the I/O bus (like APIC interrupts in intel MP
+ *	systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	apic_intr_init();
+#endif
+
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *	generally used to activate any machine specific identification
+ *	routines that may be needed before setup_arch() runs.  On VISWS
+ *	this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *	Called as the final act of trap_init().  Used in VISWS to initialise
+ *	the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.mask = CPU_MASK_NONE,
+	.name = "timer"
+};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *	Must plug the system timer interrupt source at HZ into the IRQ listed
+ *	in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *	The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ *	along the MCA bus.  Use this to hook into that chain if you will need
+ *	it.
+ **/
+void mca_nmi_hook(void)
+{
+	/* If I recall correctly, there's a whole bunch of other things that
+	 * we can do to check for NMI problems, but that's all I know about
+	 * at the moment.
+	 */
+
+	printk("NMI generated from unknown source!\n");
+}
+#endif
+
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
+											"IPI Broadcast");
+	return 1;
+}
+
+__setup("no_ipi_broadcast", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
+											"Shortcut");
+	return 0;
+}
+
+late_initcall(print_ipi_mode);
+
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ *
+ * Description:
+ *	This is included late in kernel/setup.c so that it can make
+ *	use of all of the static functions.
+ **/
+
+char * __init machine_specific_memory_setup(void)
+{
+	char *who;
+
+
+	who = "BIOS-e820";
+
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+		unsigned long mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (ALT_MEM_K < EXT_MEM_K) {
+			mem_size = EXT_MEM_K;
+			who = "BIOS-88";
+		} else {
+			mem_size = ALT_MEM_K;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+  	}
+	return who;
+}