Merge branch 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull exception table generation updates from Ingo Molnar:
 "The biggest change here is to allow the build-time sorting of the
  exception table, to speed up booting.  This is achieved by the
  architecture enabling BUILDTIME_EXTABLE_SORT.  This option is enabled
  for x86 and MIPS currently.

  On x86 a number of fixes and changes were needed to allow build-time
  sorting of the exception table, in particular a relocation invariant
  exception table format was needed.  This required the abstracting out
  of exception table protocol and the removal of 20 years of accumulated
  assumptions about the x86 exception table format.

  While at it, this tree also cleans up various other aspects of
  exception handling, such as early(er) exception handling for
  rdmsr_safe() et al.

  All in one, as the result of these changes the x86 exception code is
  now pretty nice and modern.  As an added bonus any regressions in this
  code will be early and violent crashes, so if you see any of those,
  you'll know whom to blame!"

Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.

* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  Revert "x86, extable: Disable presorted exception table for now"
  scripts/sortextable: Handle relative entries, and other cleanups
  x86, extable: Switch to relative exception table entries
  x86, extable: Disable presorted exception table for now
  x86, extable: Add _ASM_EXTABLE_EX() macro
  x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
  x86, extable: Remove the now-unused __ASM_EX_SEC macros
  x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
  ...

5 files changed, 208 insertions, 168 deletions

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 7b784f4ef1e4..01ccf9b71473 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -56,6 +56,7 @@
 #include <asm/irq_vectors.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
+#include <asm/asm.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
@@ -151,10 +152,8 @@
 .pushsection .fixup, "ax"
 99:	movl $0, (%esp)
 	jmp 98b
-.section __ex_table, "a"
-	.align 4
-	.long 98b, 99b
 .popsection
+	_ASM_EXTABLE(98b,99b)
 .endm
 
 .macro PTGS_TO_GS
@@ -164,10 +163,8 @@
 .pushsection .fixup, "ax"
 99:	movl $0, PT_GS(%esp)
 	jmp 98b
-.section __ex_table, "a"
-	.align 4
-	.long 98b, 99b
 .popsection
+	_ASM_EXTABLE(98b,99b)
 .endm
 
 .macro GS_TO_REG reg
@@ -249,12 +246,10 @@
 	jmp 2b
 6:	movl $0, (%esp)
 	jmp 3b
-.section __ex_table, "a"
-	.align 4
-	.long 1b, 4b
-	.long 2b, 5b
-	.long 3b, 6b
 .popsection
+	_ASM_EXTABLE(1b,4b)
+	_ASM_EXTABLE(2b,5b)
+	_ASM_EXTABLE(3b,6b)
 	POP_GS_EX
 .endm
 
@@ -415,10 +410,7 @@ sysenter_past_esp:
 	jae syscall_fault
 1:	movl (%ebp),%ebp
 	movl %ebp,PT_EBP(%esp)
-.section __ex_table,"a"
-	.align 4
-	.long 1b,syscall_fault
-.previous
+	_ASM_EXTABLE(1b,syscall_fault)
 
 	GET_THREAD_INFO(%ebp)
 
@@ -485,10 +477,8 @@ sysexit_audit:
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
 	jmp 1b
-.section __ex_table,"a"
-	.align 4
-	.long 1b,2b
 .popsection
+	_ASM_EXTABLE(1b,2b)
 	PTGS_TO_GS_EX
 ENDPROC(ia32_sysenter_target)
 
@@ -543,10 +533,7 @@ ENTRY(iret_exc)
 	pushl $do_iret_error
 	jmp error_code
 .previous
-.section __ex_table,"a"
-	.align 4
-	.long irq_return,iret_exc
-.previous
+	_ASM_EXTABLE(irq_return,iret_exc)
 
 	CFI_RESTORE_STATE
 ldt_ss:
@@ -901,10 +888,7 @@ END(device_not_available)
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iret
-.section __ex_table,"a"
-	.align 4
-	.long native_iret, iret_exc
-.previous
+	_ASM_EXTABLE(native_iret, iret_exc)
 END(native_iret)
 
 ENTRY(native_irq_enable_sysexit)
@@ -1093,13 +1077,10 @@ ENTRY(xen_failsafe_callback)
 	movl %eax,16(%esp)
 	jmp 4b
 .previous
-.section __ex_table,"a"
-	.align 4
-	.long 1b,6b
-	.long 2b,7b
-	.long 3b,8b
-	.long 4b,9b
-.previous
+	_ASM_EXTABLE(1b,6b)
+	_ASM_EXTABLE(2b,7b)
+	_ASM_EXTABLE(3b,8b)
+	_ASM_EXTABLE(4b,9b)
 ENDPROC(xen_failsafe_callback)
 
 BUILD_INTERRUPT3(xen_hvm_callback_vector, XEN_HVM_EVTCHN_CALLBACK,
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index cdc79b5cfcd9..320852d02026 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -55,6 +55,7 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 #include <asm/percpu.h>
+#include <asm/asm.h>
 #include <linux/err.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
@@ -900,18 +901,12 @@ restore_args:
 
 irq_return:
 	INTERRUPT_RETURN
-
-	.section __ex_table, "a"
-	.quad irq_return, bad_iret
-	.previous
+	_ASM_EXTABLE(irq_return, bad_iret)
 
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iretq
-
-	.section __ex_table,"a"
-	.quad native_iret, bad_iret
-	.previous
+	_ASM_EXTABLE(native_iret, bad_iret)
 #endif
 
 	.section .fixup,"ax"
@@ -1181,10 +1176,7 @@ gs_change:
 	CFI_ENDPROC
 END(native_load_gs_index)
 
-	.section __ex_table,"a"
-	.align 8
-	.quad gs_change,bad_gs
-	.previous
+	_ASM_EXTABLE(gs_change,bad_gs)
 	.section .fixup,"ax"
 	/* running with kernelgs */
 bad_gs:
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index ce0be7cd085e..463c9797ca6a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -21,6 +21,7 @@
 #include <asm/msr-index.h>
 #include <asm/cpufeature.h>
 #include <asm/percpu.h>
+#include <asm/nops.h>
 
 /* Physical address */
 #define pa(X) ((X) - __PAGE_OFFSET)
@@ -363,28 +364,23 @@ default_entry:
 	pushl $0
 	popfl
 
-#ifdef CONFIG_SMP
-	cmpb $0, ready
-	jnz checkCPUtype
-#endif /* CONFIG_SMP */
-
 /*
  * start system 32-bit setup. We need to re-do some of the things done
  * in 16-bit mode for the "real" operations.
  */
-	call setup_idt
-
-checkCPUtype:
-
-	movl $-1,X86_CPUID		#  -1 for no CPUID initially
-
+	movl setup_once_ref,%eax
+	andl %eax,%eax
+	jz 1f				# Did we do this already?
+	call *%eax
+1:
+	
 /* check if it is 486 or 386. */
 /*
  * XXX - this does a lot of unnecessary setup.  Alignment checks don't
  * apply at our cpl of 0 and the stack ought to be aligned already, and
  * we don't need to preserve eflags.
  */
-
+	movl $-1,X86_CPUID	# -1 for no CPUID initially
 	movb $3,X86		# at least 386
 	pushfl			# push EFLAGS
 	popl %eax		# get EFLAGS
@@ -450,21 +446,6 @@ is386:	movl $2,%ecx		# set MP
 	movl $(__KERNEL_PERCPU), %eax
 	movl %eax,%fs			# set this cpu's percpu
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-	/*
-	 * The linker can't handle this by relocation.  Manually set
-	 * base address in stack canary segment descriptor.
-	 */
-	cmpb $0,ready
-	jne 1f
-	movl $gdt_page,%eax
-	movl $stack_canary,%ecx
-	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
-	shrl $16, %ecx
-	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
-	movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
-1:
-#endif
 	movl $(__KERNEL_STACK_CANARY),%eax
 	movl %eax,%gs
 
@@ -473,7 +454,6 @@ is386:	movl $2,%ecx		# set MP
 
 	cld			# gcc2 wants the direction flag cleared at all times
 	pushl $0		# fake return address for unwinder
-	movb $1, ready
 	jmp *(initial_code)
 
 /*
@@ -495,81 +475,122 @@ check_x87:
 	.byte 0xDB,0xE4		/* fsetpm for 287, ignored by 387 */
 	ret
 
+	
+#include "verify_cpu.S"
+
 /*
- *  setup_idt
+ *  setup_once
  *
- *  sets up a idt with 256 entries pointing to
- *  ignore_int, interrupt gates. It doesn't actually load
- *  idt - that can be done only after paging has been enabled
- *  and the kernel moved to PAGE_OFFSET. Interrupts
- *  are enabled elsewhere, when we can be relatively
- *  sure everything is ok.
+ *  The setup work we only want to run on the BSP.
  *
  *  Warning: %esi is live across this function.
  */
-setup_idt:
-	lea ignore_int,%edx
-	movl $(__KERNEL_CS << 16),%eax
-	movw %dx,%ax		/* selector = 0x0010 = cs */
-	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
+__INIT
+setup_once:
+	/*
+	 * Set up a idt with 256 entries pointing to ignore_int,
+	 * interrupt gates. It doesn't actually load idt - that needs
+	 * to be done on each CPU. Interrupts are enabled elsewhere,
+	 * when we can be relatively sure everything is ok.
+	 */
 
-	lea idt_table,%edi
-	mov $256,%ecx
-rp_sidt:
+	movl $idt_table,%edi
+	movl $early_idt_handlers,%eax
+	movl $NUM_EXCEPTION_VECTORS,%ecx
+1:
 	movl %eax,(%edi)
-	movl %edx,4(%edi)
+	movl %eax,4(%edi)
+	/* interrupt gate, dpl=0, present */
+	movl $(0x8E000000 + __KERNEL_CS),2(%edi)
+	addl $9,%eax
 	addl $8,%edi
-	dec %ecx
-	jne rp_sidt
+	loop 1b
 
-.macro	set_early_handler handler,trapno
-	lea \handler,%edx
+	movl $256 - NUM_EXCEPTION_VECTORS,%ecx
+	movl $ignore_int,%edx
 	movl $(__KERNEL_CS << 16),%eax
-	movw %dx,%ax
+	movw %dx,%ax		/* selector = 0x0010 = cs */
 	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
-	lea idt_table,%edi
-	movl %eax,8*\trapno(%edi)
-	movl %edx,8*\trapno+4(%edi)
-.endm
+2:
+	movl %eax,(%edi)
+	movl %edx,4(%edi)
+	addl $8,%edi
+	loop 2b
 
-	set_early_handler handler=early_divide_err,trapno=0
-	set_early_handler handler=early_illegal_opcode,trapno=6
-	set_early_handler handler=early_protection_fault,trapno=13
-	set_early_handler handler=early_page_fault,trapno=14
+#ifdef CONFIG_CC_STACKPROTECTOR
+	/*
+	 * Configure the stack canary. The linker can't handle this by
+	 * relocation.  Manually set base address in stack canary
+	 * segment descriptor.
+	 */
+	movl $gdt_page,%eax
+	movl $stack_canary,%ecx
+	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
+	shrl $16, %ecx
+	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
+	movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
+#endif
 
+	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-early_divide_err:
-	xor %edx,%edx
-	pushl $0	/* fake errcode */
-	jmp early_fault
+ENTRY(early_idt_handlers)
+	# 36(%esp) %eflags
+	# 32(%esp) %cs
+	# 28(%esp) %eip
+	# 24(%rsp) error code
+	i = 0
+	.rept NUM_EXCEPTION_VECTORS
+	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
+	ASM_NOP2
+	.else
+	pushl $0		# Dummy error code, to make stack frame uniform
+	.endif
+	pushl $i		# 20(%esp) Vector number
+	jmp early_idt_handler
+	i = i + 1
+	.endr
+ENDPROC(early_idt_handlers)
+	
+	/* This is global to keep gas from relaxing the jumps */
+ENTRY(early_idt_handler)
+	cld
+	cmpl $2,%ss:early_recursion_flag
+	je hlt_loop
+	incl %ss:early_recursion_flag
 
-early_illegal_opcode:
-	movl $6,%edx
-	pushl $0	/* fake errcode */
-	jmp early_fault
+	push %eax		# 16(%esp)
+	push %ecx		# 12(%esp)
+	push %edx		#  8(%esp)
+	push %ds		#  4(%esp)
+	push %es		#  0(%esp)
+	movl $(__KERNEL_DS),%eax
+	movl %eax,%ds
+	movl %eax,%es
 
-early_protection_fault:
-	movl $13,%edx
-	jmp early_fault
+	cmpl $(__KERNEL_CS),32(%esp)
+	jne 10f
 
-early_page_fault:
-	movl $14,%edx
-	jmp early_fault
+	leal 28(%esp),%eax	# Pointer to %eip
+	call early_fixup_exception
+	andl %eax,%eax
+	jnz ex_entry		/* found an exception entry */
 
-early_fault:
-	cld
+10:
 #ifdef CONFIG_PRINTK
-	pusha
-	movl $(__KERNEL_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	cmpl $2,early_recursion_flag
-	je hlt_loop
-	incl early_recursion_flag
+	xorl %eax,%eax
+	movw %ax,2(%esp)	/* clean up the segment values on some cpus */
+	movw %ax,6(%esp)
+	movw %ax,34(%esp)
+	leal  40(%esp),%eax
+	pushl %eax		/* %esp before the exception */
+	pushl %ebx
+	pushl %ebp
+	pushl %esi
+	pushl %edi
 	movl %cr2,%eax
 	pushl %eax
-	pushl %edx		/* trapno */
+	pushl (20+6*4)(%esp)	/* trapno */
 	pushl $fault_msg
 	call printk
 #endif
@@ -578,6 +599,17 @@ hlt_loop:
 	hlt
 	jmp hlt_loop
 
+ex_entry:
+	pop %es
+	pop %ds
+	pop %edx
+	pop %ecx
+	pop %eax
+	addl $8,%esp		/* drop vector number and error code */
+	decl %ss:early_recursion_flag
+	iret
+ENDPROC(early_idt_handler)
+
 /* This is the default interrupt "handler" :-) */
 	ALIGN
 ignore_int:
@@ -611,13 +643,18 @@ ignore_int:
 	popl %eax
 #endif
 	iret
+ENDPROC(ignore_int)
+__INITDATA
+	.align 4
+early_recursion_flag:
+	.long 0
 
-#include "verify_cpu.S"
-
-	__REFDATA
-.align 4
+__REFDATA
+	.align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
+ENTRY(setup_once_ref)
+	.long setup_once
 
 /*
  * BSS section
@@ -670,22 +707,19 @@ ENTRY(initial_page_table)
 ENTRY(stack_start)
 	.long init_thread_union+THREAD_SIZE
 
-early_recursion_flag:
-	.long 0
-
-ready:	.byte 0
-
+__INITRODATA
 int_msg:
 	.asciz "Unknown interrupt or fault at: %p %p %p\n"
 
 fault_msg:
 /* fault info: */
 	.ascii "BUG: Int %d: CR2 %p\n"
-/* pusha regs: */
-	.ascii "     EDI %p  ESI %p  EBP %p  ESP %p\n"
-	.ascii "     EBX %p  EDX %p  ECX %p  EAX %p\n"
+/* regs pushed in early_idt_handler: */
+	.ascii "     EDI %p  ESI %p  EBP %p  EBX %p\n"
+	.ascii "     ESP %p   ES %p   DS %p\n"
+	.ascii "     EDX %p  ECX %p  EAX %p\n"
 /* fault frame: */
-	.ascii "     err %p  EIP %p   CS %p  flg %p\n"
+	.ascii "     vec %p  err %p  EIP %p   CS %p  flg %p\n"
 	.ascii "Stack: %p %p %p %p %p %p %p %p\n"
 	.ascii "       %p %p %p %p %p %p %p %p\n"
 	.asciz "       %p %p %p %p %p %p %p %p\n"
@@ -699,6 +733,7 @@ fault_msg:
  * segment size, and 32-bit linear address value:
  */
 
+	.data
 .globl boot_gdt_descr
 .globl idt_descr
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 40f4eb3766d1..7a40f2447321 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -19,12 +19,15 @@
 #include <asm/cache.h>
 #include <asm/processor-flags.h>
 #include <asm/percpu.h>
+#include <asm/nops.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
 #include <asm/paravirt.h>
+#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
 #else
-#define GET_CR2_INTO_RCX movq %cr2, %rcx
+#define GET_CR2_INTO(reg) movq %cr2, reg
+#define INTERRUPT_RETURN iretq
 #endif
 
 /* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
@@ -270,36 +273,56 @@ bad_address:
 	jmp bad_address
 
 	.section ".init.text","ax"
-#ifdef CONFIG_EARLY_PRINTK
 	.globl early_idt_handlers
 early_idt_handlers:
+	# 104(%rsp) %rflags
+	#  96(%rsp) %cs
+	#  88(%rsp) %rip
+	#  80(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	movl $i, %esi
+	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
+	ASM_NOP2
+	.else
+	pushq $0		# Dummy error code, to make stack frame uniform
+	.endif
+	pushq $i		# 72(%rsp) Vector number
 	jmp early_idt_handler
 	i = i + 1
 	.endr
-#endif
 
 ENTRY(early_idt_handler)
-#ifdef CONFIG_EARLY_PRINTK
+	cld
+
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
 	incl early_recursion_flag(%rip)
-	GET_CR2_INTO_RCX
-	movq %rcx,%r9
-	xorl %r8d,%r8d		# zero for error code
-	movl %esi,%ecx		# get vector number
-	# Test %ecx against mask of vectors that push error code.
-	cmpl $31,%ecx
-	ja 0f
-	movl $1,%eax
-	salq %cl,%rax
-	testl $0x27d00,%eax
-	je 0f
-	popq %r8		# get error code
-0:	movq 0(%rsp),%rcx	# get ip
-	movq 8(%rsp),%rdx	# get cs
+
+	pushq %rax		# 64(%rsp)
+	pushq %rcx		# 56(%rsp)
+	pushq %rdx		# 48(%rsp)
+	pushq %rsi		# 40(%rsp)
+	pushq %rdi		# 32(%rsp)
+	pushq %r8		# 24(%rsp)
+	pushq %r9		# 16(%rsp)
+	pushq %r10		#  8(%rsp)
+	pushq %r11		#  0(%rsp)
+
+	cmpl $__KERNEL_CS,96(%rsp)
+	jne 10f
+
+	leaq 88(%rsp),%rdi	# Pointer to %rip
+	call early_fixup_exception
+	andl %eax,%eax
+	jnz 20f			# Found an exception entry
+
+10:
+#ifdef CONFIG_EARLY_PRINTK
+	GET_CR2_INTO(%r9)	# can clobber any volatile register if pv
+	movl 80(%rsp),%r8d	# error code
+	movl 72(%rsp),%esi	# vector number
+	movl 96(%rsp),%edx	# %cs
+	movq 88(%rsp),%rcx	# %rip
 	xorl %eax,%eax
 	leaq early_idt_msg(%rip),%rdi
 	call early_printk
@@ -308,17 +331,32 @@ ENTRY(early_idt_handler)
 	call dump_stack
 #ifdef CONFIG_KALLSYMS	
 	leaq early_idt_ripmsg(%rip),%rdi
-	movq 0(%rsp),%rsi	# get rip again
+	movq 40(%rsp),%rsi	# %rip again
 	call __print_symbol
 #endif
 #endif /* EARLY_PRINTK */
 1:	hlt
 	jmp 1b
 
-#ifdef CONFIG_EARLY_PRINTK
+20:	# Exception table entry found
+	popq %r11
+	popq %r10
+	popq %r9
+	popq %r8
+	popq %rdi
+	popq %rsi
+	popq %rdx
+	popq %rcx
+	popq %rax
+	addq $16,%rsp		# drop vector number and error code
+	decl early_recursion_flag(%rip)
+	INTERRUPT_RETURN
+
+	.balign 4
 early_recursion_flag:
 	.long 0
 
+#ifdef CONFIG_EARLY_PRINTK
 early_idt_msg:
 	.asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
 early_idt_ripmsg:
diff --git a/arch/x86/kernel/test_rodata.c b/arch/x86/kernel/test_rodata.c
index c29e235792af..b79133abda48 100644
--- a/arch/x86/kernel/test_rodata.c
+++ b/arch/x86/kernel/test_rodata.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
+#include <asm/asm.h>
 
 int rodata_test(void)
 {
@@ -42,14 +43,7 @@ int rodata_test(void)
 		".section .fixup,\"ax\"\n"
 		"2:	jmp 1b\n"
 		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"       .align 16\n"
-#ifdef CONFIG_X86_32
-		"	.long 0b,2b\n"
-#else
-		"	.quad 0b,2b\n"
-#endif
-		".previous"
+		_ASM_EXTABLE(0b,2b)
 		: [rslt] "=r" (result)
 		: [rodata_test] "r" (&rodata_test_data), [zero] "r" (0UL)
 	);