diff options
author | Yinghai Lu <yinghai@kernel.org> | 2010-08-25 13:39:17 -0700 |
---|---|---|
committer | H. Peter Anvin <hpa@zytor.com> | 2010-08-27 11:12:29 -0700 |
commit | 72d7c3b33c980843e756681fb4867dc1efd62a76 (patch) | |
tree | 9607345d9fa055dd501aacf0772258fb72897035 /arch/x86/kernel/e820.c | |
parent | 301ff3e88ef9ff4bdb92f36a3e6170fce4c9dd34 (diff) | |
download | blackbird-op-linux-72d7c3b33c980843e756681fb4867dc1efd62a76.tar.gz blackbird-op-linux-72d7c3b33c980843e756681fb4867dc1efd62a76.zip |
x86: Use memblock to replace early_res
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
so adjust some calling later in setup.c::setup_arch()
-- corruption_check and mptable_update
-v2: Move reserve_brk() early
Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
that could happen We have more then 128 RAM entry in E820 tables, and
memblock_x86_fill() could use memblock_find_in_range() to find a new place for
memblock.memory.region array.
and We don't need to use extend_brk() after fill_memblock_area()
So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
memblock.reserved already..
use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
active_region for 32bit does include high pages
need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline
Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Diffstat (limited to 'arch/x86/kernel/e820.c')
-rw-r--r-- | arch/x86/kernel/e820.c | 159 |
1 files changed, 53 insertions, 106 deletions
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 0d6fc71bedb1..a9221d18a5ed 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -15,6 +15,7 @@ #include <linux/pfn.h> #include <linux/suspend.h> #include <linux/firmware-map.h> +#include <linux/memblock.h> #include <asm/e820.h> #include <asm/proto.h> @@ -742,69 +743,29 @@ core_initcall(e820_mark_nvs_memory); */ u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) { - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 addr; - u64 ei_start, ei_last; + u64 mem = memblock_find_in_range(start, end, size, align); - if (ei->type != E820_RAM) - continue; - - ei_last = ei->addr + ei->size; - ei_start = ei->addr; - addr = find_early_area(ei_start, ei_last, start, end, - size, align); - - if (addr != -1ULL) - return addr; - } - return -1ULL; -} + if (mem == MEMBLOCK_ERROR) + return -1ULL; -u64 __init find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align) -{ - return find_e820_area(start, end, size, align); + return mem; } -u64 __init get_max_mapped(void) -{ - u64 end = max_pfn_mapped; - - end <<= PAGE_SHIFT; - - return end; -} /* * Find next free range after *start */ u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) { - int i; + u64 mem = memblock_x86_find_in_range_size(start, sizep, align); - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 addr; - u64 ei_start, ei_last; - - if (ei->type != E820_RAM) - continue; - - ei_last = ei->addr + ei->size; - ei_start = ei->addr; - addr = find_early_area_size(ei_start, ei_last, start, - sizep, align); + if (mem == MEMBLOCK_ERROR) + return -1ULL - if (addr != -1ULL) - return addr; - } - - return -1ULL; + return mem; } /* - * pre allocated 4k and reserved it in e820 + * pre allocated 4k and reserved it in memblock and e820_saved */ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) { @@ -813,8 +774,8 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 start; for (start = startt; ; start += size) { - start = find_e820_area_size(start, &size, align); - if (!(start + 1)) + start = memblock_x86_find_in_range_size(start, &size, align); + if (start == MEMBLOCK_ERROR) return 0; if (size >= sizet) break; @@ -830,10 +791,9 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) addr = round_down(start + size - sizet, align); if (addr < start) return 0; - e820_update_range(addr, sizet, E820_RAM, E820_RESERVED); + memblock_x86_reserve_range(addr, addr + sizet, "new next"); e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED); - printk(KERN_INFO "update e820 for early_reserve_e820\n"); - update_e820(); + printk(KERN_INFO "update e820_saved for early_reserve_e820\n"); update_e820_saved(); return addr; @@ -895,52 +855,12 @@ unsigned long __init e820_end_of_low_ram_pfn(void) { return e820_end_pfn(1UL<<(32 - PAGE_SHIFT), E820_RAM); } -/* - * Finds an active region in the address range from start_pfn to last_pfn and - * returns its range in ei_startpfn and ei_endpfn for the e820 entry. - */ -int __init e820_find_active_region(const struct e820entry *ei, - unsigned long start_pfn, - unsigned long last_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn) -{ - u64 align = PAGE_SIZE; - - *ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT; - *ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT; - - /* Skip map entries smaller than a page */ - if (*ei_startpfn >= *ei_endpfn) - return 0; - - /* Skip if map is outside the node */ - if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= last_pfn) - return 0; - - /* Check for overlaps */ - if (*ei_startpfn < start_pfn) - *ei_startpfn = start_pfn; - if (*ei_endpfn > last_pfn) - *ei_endpfn = last_pfn; - - return 1; -} /* Walk the e820 map and register active regions within a node */ void __init e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long last_pfn) { - unsigned long ei_startpfn; - unsigned long ei_endpfn; - int i; - - for (i = 0; i < e820.nr_map; i++) - if (e820_find_active_region(&e820.map[i], - start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - add_active_range(nid, ei_startpfn, ei_endpfn); + memblock_x86_register_active_regions(nid, start_pfn, last_pfn); } /* @@ -950,18 +870,16 @@ void __init e820_register_active_regions(int nid, unsigned long start_pfn, */ u64 __init e820_hole_size(u64 start, u64 end) { - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long last_pfn = end >> PAGE_SHIFT; - unsigned long ei_startpfn, ei_endpfn, ram = 0; - int i; + return memblock_x86_hole_size(start, end); +} - for (i = 0; i < e820.nr_map; i++) { - if (e820_find_active_region(&e820.map[i], - start_pfn, last_pfn, - &ei_startpfn, &ei_endpfn)) - ram += ei_endpfn - ei_startpfn; - } - return end - start - ((u64)ram << PAGE_SHIFT); +void reserve_early(u64 start, u64 end, char *name) +{ + memblock_x86_reserve_range(start, end, name); +} +void free_early(u64 start, u64 end) +{ + memblock_x86_free_range(start, end); } static void early_panic(char *msg) @@ -1210,3 +1128,32 @@ void __init setup_memory_map(void) printk(KERN_INFO "BIOS-provided physical RAM map:\n"); e820_print_map(who); } + +void __init memblock_x86_fill(void) +{ + int i; + u64 end; + + /* + * EFI may have more than 128 entries + * We are safe to enable resizing, beause memblock_x86_fill() + * is rather later for x86 + */ + memblock_can_resize = 1; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + end = ei->addr + ei->size; + if (end != (resource_size_t)end) + continue; + + if (ei->type != E820_RAM && ei->type != E820_RESERVED_KERN) + continue; + + memblock_add(ei->addr, ei->size); + } + + memblock_analyze(); + memblock_dump_all(); +} |