Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Print the hypervisor returned tsc_khz during boot
  x86: Correct segment permission flags in 64-bit linker script
  x86: cpuinit-annotate SMP boot trampolines properly
  x86: Increase timeout for EHCI debug port reset completion in early printk
  x86: Fix uaccess_32.h typo
  x86: Trivial whitespace cleanups
  x86, apic: Fix missed handling of discrete apics
  x86/i386: Remove duplicated #include
  x86, mtrr: Convert loop to a while based construct, avoid naked semicolon
  Revert 'x86: Fix system crash when loading with "reservetop" parameter'
  x86, mce: Fix compile warning in case of CONFIG_SMP=n
  x86, apic: Use logical flat on intel with <= 8 logical cpus
  x86: SGI UV: Map MMIO-High memory range
  x86: SGI UV: Add volatile semantics to macros that access chipset registers
  x86: SGI UV: Fix IPI macros
  x86: apic: Convert BUG() to BUG_ON()
  x86: Remove final bits of CONFIG_X86_OLD_MCE

4 files changed, 34 insertions, 27 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a34601f52987..a58ef98be155 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -62,7 +62,7 @@ unsigned int boot_cpu_physical_apicid = -1U;
 /*
  * The highest APIC ID seen during enumeration.
  *
- * This determines the messaging protocol we can use: if all APIC IDs
+ * On AMD, this determines the messaging protocol we can use: if all APIC IDs
  * are in the 0 ... 7 range, then we can use logical addressing which
  * has some performance advantages (better broadcasting).
  *
@@ -979,7 +979,7 @@ void lapic_shutdown(void)
 {
 	unsigned long flags;
 
-	if (!cpu_has_apic)
+	if (!cpu_has_apic && !apic_from_smp_config())
 		return;
 
 	local_irq_save(flags);
@@ -1197,8 +1197,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 * This is meaningless in clustered apic mode, so we skip it.
 	 */
-	if (!apic->apic_id_registered())
-		BUG();
+	BUG_ON(!apic->apic_id_registered());
 
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
@@ -1917,24 +1916,14 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		max_physical_apicid = apicid;
 
 #ifdef CONFIG_X86_32
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (max_physical_apicid >= 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		if (num_processors > 8)
+			def_to_bigsmp = 1;
+		break;
+	case X86_VENDOR_AMD:
+		if (max_physical_apicid >= 8)
 			def_to_bigsmp = 1;
-		}
 	}
 #endif
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 809e1cf86d6b..64970b9885f2 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1874,7 +1874,7 @@ __apicdebuginit(int) print_all_ICs(void)
 	print_PIC();
 
 	/* don't print out if apic is not there */
-	if (!cpu_has_apic || disable_apic)
+	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
 	print_all_local_APICs();
@@ -1999,7 +1999,7 @@ void disable_IO_APIC(void)
 	/*
 	 * Use virtual wire A mode when interrupt remapping is enabled.
 	 */
-	if (cpu_has_apic)
+	if (cpu_has_apic || apic_from_smp_config())
 		disconnect_bsp_APIC(!intr_remapping_enabled &&
 				ioapic_i8259.pin != -1);
 }
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 65edc180fc82..c4cbd3080c1c 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -64,16 +64,23 @@ void __init default_setup_apic_routing(void)
 			apic = &apic_x2apic_phys;
 		else
 			apic = &apic_x2apic_cluster;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 #endif
 
 	if (apic == &apic_flat) {
-		if (max_physical_apicid >= 8)
-			apic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (num_processors > 8)
+				apic = &apic_physflat;
+			break;
+		case X86_VENDOR_AMD:
+			if (max_physical_apicid >= 8)
+				apic = &apic_physflat;
+		}
 	}
 
+	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 601159374e87..f5f5886a6b53 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -389,6 +389,16 @@ static __init void map_gru_high(int max_pnode)
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
 }
 
+static __init void map_mmr_high(int max_pnode)
+{
+	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
+	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
+	if (mmr.s.enable)
+		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+}
+
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -643,6 +653,7 @@ void __init uv_system_init(void)
 	}
 
 	map_gru_high(max_pnode);
+	map_mmr_high(max_pnode);
 	map_mmioh_high(max_pnode);
 
 	uv_cpu_init();