Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 800 insertions, 0 deletions

diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
new file mode 100644
index 000000000000..55f227441f9e
--- /dev/null
+++ b/arch/sh/lib/memcpy-sh4.S
@@ -0,0 +1,800 @@
+/*
+ * "memcpy" implementation of SuperH
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (c) 2002  STMicroelectronics Ltd
+ *   Modified from memcpy.S and micro-optimised for SH4
+ *   Stuart Menefy (stuart.menefy@st.com)
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/config.h>
+
+/*
+ * void *memcpy(void *dst, const void *src, size_t n);
+ *
+ * It is assumed that there is no overlap between src and dst.
+ * If there is an overlap, then the results are undefined.
+ */
+
+	!
+	!	GHIJ KLMN OPQR -->  ...G HIJK LMNO PQR.
+	!
+
+	! Size is 16 or greater, and may have trailing bytes
+
+	.balign	32
+.Lcase1:
+	! Read a long word and write a long word at once
+	! At the start of each iteration, r7 contains last long load
+	add	#-1,r5		!  79 EX
+	mov	r4,r2		!   5 MT (0 cycles latency)
+
+	mov.l	@(r0,r5),r7	!  21 LS (2 cycles latency)
+	add	#-4,r5		!  50 EX
+
+	add	#7,r2		!  79 EX
+	!
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	! 6 cycles, 4 bytes per iteration
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! NMLK
+	mov	r7, r3		!   5 MT (latency=0)	! RQPO
+
+	cmp/hi	r2,r0		!  57 MT
+	shll16	r3		! 103 EX
+
+	mov	r1,r6		!   5 MT (latency=0)
+	shll8	r3		! 102 EX		! Oxxx
+
+	shlr8	r6		! 106 EX		! xNML
+	mov	r1, r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! ONML
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#else
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! KLMN
+	mov	r7,r3		!   5 MT (latency=0)	! OPQR
+
+	cmp/hi	r2,r0		!  57 MT
+	shlr16	r3		! 107 EX
+
+	shlr8	r3		! 106 EX		! xxxO
+	mov	r1,r6		!   5 MT (latency=0)
+
+	shll8	r6		! 102 EX		! LMNx
+	mov	r1,r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! LMNO
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#endif
+	! Finally, copy a byte at once, if necessary
+
+	add	#4,r5		!  50 EX
+	cmp/eq	r4,r0		!  54 MT
+
+	add	#-6,r2		!  50 EX
+	bt	9f		! 109 BR
+
+8:	cmp/hi	r2,r0		!  57 MT
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+	bt/s	8b		! 109 BR
+
+	 mov.b	r1,@-r0		!  29 LS
+
+9:	rts
+	 nop
+
+
+	!
+	!	GHIJ KLMN OPQR -->  .GHI JKLM NOPQ R...
+	!
+
+	! Size is 16 or greater, and may have trailing bytes
+
+	.balign	32
+.Lcase3:
+	! Read a long word and write a long word at once
+	! At the start of each iteration, r7 contains last long load
+	add	#-3,r5		! 79 EX
+	mov	r4,r2		!  5 MT (0 cycles latency)
+
+	mov.l	@(r0,r5),r7	! 21 LS (2 cycles latency)
+	add	#-4,r5		! 50 EX
+
+	add	#7,r2		!  79 EX
+	!
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	! 6 cycles, 4 bytes per iteration
+3:	mov.l	@(r0,r5),r1	!  21 LS (latency=2)	! NMLK
+	mov	r7, r3		!   5 MT (latency=0)	! RQPO
+
+	cmp/hi	r2,r0		!  57 MT
+	shll8	r3		! 102 EX		! QPOx
+
+	mov	r1,r6		!   5 MT (latency=0)
+	shlr16	r6		! 107 EX
+
+	shlr8	r6		! 106 EX		! xxxN
+	mov	r1, r7		!   5 MT (latency=0)
+
+	or	r6,r3		!  82 EX		! QPON
+	bt/s	3b		! 109 BR
+
+	 mov.l	r3,@-r0		!  30 LS
+#else
+3:	mov	r1,r3		! OPQR
+	shlr8	r3		! xOPQ
+	mov.l	@(r0,r5),r1	! KLMN
+	mov	r1,r6
+	shll16	r6
+	shll8	r6		! Nxxx
+	or	r6,r3		! NOPQ
+	cmp/hi	r2,r0
+	bt/s	3b
+	 mov.l	r3,@-r0
+#endif
+
+	! Finally, copy a byte at once, if necessary
+
+	add	#6,r5		!  50 EX
+	cmp/eq	r4,r0		!  54 MT
+
+	add	#-6,r2		!  50 EX
+	bt	9f		! 109 BR
+
+8:	cmp/hi	r2,r0		!  57 MT
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+	bt/s	8b		! 109 BR
+
+	 mov.b	r1,@-r0		!  29 LS
+
+9:	rts
+	 nop
+
+ENTRY(memcpy)
+
+	! Calculate the invariants which will be used in the remainder
+	! of the code:
+	!
+	!      r4   -->  [ ...  ] DST             [ ...  ] SRC
+	!	         [ ...  ]                 [ ...  ]
+	!	           :                        :
+	!      r0   -->  [ ...  ]       r0+r5 --> [ ...  ]
+	!
+	!
+
+	! Short circuit the common case of src, dst and len being 32 bit aligned
+	! and test for zero length move
+
+	mov	r6, r0		!   5 MT (0 cycle latency)
+	or	r4, r0		!  82 EX
+
+	or	r5, r0		!  82 EX
+	tst	r6, r6		!  86 MT
+
+	bt/s	99f		! 111 BR		(zero len)
+	 tst	#3, r0		!  87 MT
+
+	mov	r4, r0		!   5 MT (0 cycle latency)
+	add	r6, r0		!  49 EX
+
+	mov	#16, r1		!   6 EX
+	bt/s	.Lcase00	! 111 BR		(aligned)
+
+	 sub	r4, r5		!  75 EX
+
+	! Arguments are not nicely long word aligned or zero len.
+	! Check for small copies, and if so do a simple byte at a time copy.
+	!
+	! Deciding on an exact value of 'small' is not easy, as the point at which
+	! using the optimised routines become worthwhile varies (these are the
+	! cycle counts for differnet sizes using byte-at-a-time vs. optimised):
+	!	size	byte-at-time	long	word	byte
+	!	16	42		39-40	46-50	50-55
+	!	24	58		43-44	54-58	62-67
+	!	36	82		49-50	66-70	80-85
+	! However the penalty for getting it 'wrong' is much higher for long word
+	! aligned data (and this is more common), so use a value of 16.
+
+	cmp/gt	r6,r1		!  56 MT
+
+	add	#-1,r5		!  50 EX
+	bf/s	6f		! 108 BR		(not small)
+
+	 mov	r5, r3		!   5 MT (latency=0)
+	shlr	r6		! 104 EX
+
+	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+	bf/s	4f		! 111 BR
+
+	 add	#-1,r3		!  50 EX
+	tst	r6, r6		!  86 MT
+
+	bt/s	98f		! 110 BR
+	 mov.b	r1,@-r0		!  29 LS
+
+	! 4 cycles, 2 bytes per iteration
+3:	mov.b	@(r0,r5),r1	!  20 LS (latency=2)
+
+4:	mov.b	@(r0,r3),r2	!  20 LS (latency=2)
+	dt	r6		!  67 EX
+
+	mov.b	r1,@-r0		!  29 LS
+	bf/s	3b		! 111 BR
+
+	 mov.b	r2,@-r0		!  29 LS
+98:
+	rts
+	 nop
+
+99:	rts
+	 mov	r4, r0
+
+	! Size is not small, so its worthwhile looking for optimisations.
+	! First align destination to a long word boundary.
+	!
+	! r5 = normal value -1
+
+6:	tst	#3, r0		!  87 MT
+        mov	#3, r3		!   6 EX
+
+	bt/s	2f		! 111 BR
+	 and	r0,r3		!  78 EX
+
+	! 3 cycles, 1 byte per iteration
+1:	dt	r3		!  67 EX
+	mov.b	@(r0,r5),r1	!  19 LS (latency=2)
+
+	add	#-1, r6		!  79 EX
+	bf/s	1b		! 109 BR
+
+	 mov.b	r1,@-r0		!  28 LS
+
+2:	add	#1, r5		!  79 EX
+
+	! Now select the appropriate bulk transfer code based on relative
+	! alignment of src and dst.
+
+	mov	r0, r3		!   5 MT (latency=0)
+
+	mov	r5, r0		!   5 MT (latency=0)
+	tst	#1, r0		!  87 MT
+
+	bf/s	1f		! 111 BR
+	 mov	#64, r7		!   6 EX
+
+	! bit 0 clear
+
+	cmp/ge	r7, r6		!  55 MT
+
+	bt/s	2f		! 111 BR
+	 tst	#2, r0		!  87 MT
+
+	! small
+	bt/s	.Lcase0
+	 mov	r3, r0
+
+	bra	.Lcase2
+	 nop
+
+	! big
+2:	bt/s	.Lcase0b
+	 mov	r3, r0
+
+	bra	.Lcase2b
+	 nop
+
+	! bit 0 set
+1:	tst	#2, r0		! 87 MT
+
+	bt/s	.Lcase1
+	 mov	r3, r0
+
+	bra	.Lcase3
+	 nop
+
+
+	!
+	!	GHIJ KLMN OPQR -->  GHIJ KLMN OPQR
+	!
+
+	! src, dst and size are all long word aligned
+	! size is non-zero
+
+	.balign	32
+.Lcase00:
+	mov	#64, r1		!   6 EX
+	mov	r5, r3		!   5 MT (latency=0)
+
+	cmp/gt	r6, r1		!  56 MT
+	add	#-4, r5		!  50 EX
+
+	bf	.Lcase00b	! 108 BR		(big loop)
+	shlr2	r6		! 105 EX
+
+	shlr	r6		! 104 EX
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+	bf/s	4f		! 111 BR
+	 add	#-8, r3		!  50 EX
+
+	tst	r6, r6		!  86 MT
+	bt/s	5f		! 110 BR
+
+	 mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	dt	r6		!  67 EX
+
+	mov.l	r1, @-r0	!  30 LS
+	bf/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+5:	rts
+	 nop
+
+
+	! Size is 16 or greater and less than 64, but may have trailing bytes
+
+	.balign	32
+.Lcase0:
+	add	#-4, r5		!  50 EX
+	mov	r4, r7		!   5 MT (latency=0)
+
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+	mov	#4, r2		!   6 EX
+
+	add	#11, r7		!  50 EX
+	tst	r2, r6		!  86 MT
+
+	mov	r5, r3		!   5 MT (latency=0)
+	bt/s	4f		! 111 BR
+
+	 add	#-4, r3		!  50 EX
+	mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	cmp/hi	r7, r0
+
+	mov.l	r1, @-r0	!  30 LS
+	bt/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+	! Copy the final 0-3 bytes
+
+	add	#3,r5		!  50 EX
+
+	cmp/eq	r0, r4		!  54 MT
+	add	#-10, r7	!  50 EX
+
+	bt	9f		! 110 BR
+
+	! 3 cycles, 1 byte per iteration
+1:	mov.b	@(r0,r5),r1	!  19 LS
+	cmp/hi	r7,r0		!  57 MT
+
+	bt/s	1b		! 111 BR
+	 mov.b	r1,@-r0		!  28 LS
+
+9:	rts
+	 nop
+
+	! Size is at least 64 bytes, so will be going round the big loop at least once.
+	!
+	!   r2 = rounded up r4
+	!   r3 = rounded down r0
+
+	.balign	32
+.Lcase0b:
+	add	#-4, r5		!  50 EX
+
+.Lcase00b:
+	mov	r0, r3		!   5 MT (latency=0)
+	mov	#(~0x1f), r1	!   6 EX
+
+	and	r1, r3		!  78 EX
+	mov	r4, r2		!   5 MT (latency=0)
+
+	cmp/eq	r3, r0		!  54 MT
+	add	#0x1f, r2	!  50 EX
+
+	bt/s	1f		! 110 BR
+	 and	r1, r2		!  78 EX
+
+	! copy initial words until cache line aligned
+
+	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+	tst	#4, r0		!  87 MT
+
+	mov	r5, r6		!   5 MT (latency=0)
+	add	#-4, r6		!  50 EX
+
+	bt/s	4f		! 111 BR
+	 add	#8, r3		!  50 EX
+
+	tst	#0x18, r0	!  87 MT
+
+	bt/s	1f		! 109 BR
+	 mov.l	r1,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r1	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r6), r7	!  21 LS (latency=2)
+	cmp/eq	r3, r0		!  54 MT
+
+	mov.l	r1, @-r0	!  30 LS
+	bf/s	3b		! 109 BR
+
+	 mov.l	r7, @-r0	!  30 LS
+
+	! Copy the cache line aligned blocks
+	!
+	! In use: r0, r2, r4, r5
+	! Scratch: r1, r3, r6, r7
+	!
+	! We could do this with the four scratch registers, but if src
+	! and dest hit the same cache line, this will thrash, so make
+	! use of additional registers.
+	!
+	! We also need r0 as a temporary (for movca), so 'undo' the invariant:
+	!   r5:	 src (was r0+r5)
+	!   r1:	 dest (was r0)
+	! this can be reversed at the end, so we don't need to save any extra
+	! state.
+	!
+1:	mov.l	r8, @-r15	!  30 LS
+	add	r0, r5		!  49 EX
+
+	mov.l	r9, @-r15	!  30 LS
+	mov	r0, r1		!   5 MT (latency=0)
+
+	mov.l	r10, @-r15	!  30 LS
+	add	#-0x1c, r5	!  50 EX
+
+	mov.l	r11, @-r15	!  30 LS
+
+	! 16 cycles, 32 bytes per iteration
+2:	mov.l	@(0x00,r5),r0	! 18 LS (latency=2)
+	add	#-0x20, r1	! 50 EX
+	mov.l	@(0x04,r5),r3	! 18 LS (latency=2)
+	mov.l	@(0x08,r5),r6	! 18 LS (latency=2)
+	mov.l	@(0x0c,r5),r7	! 18 LS (latency=2)
+	mov.l	@(0x10,r5),r8	! 18 LS (latency=2)
+	mov.l	@(0x14,r5),r9	! 18 LS (latency=2)
+	mov.l	@(0x18,r5),r10	! 18 LS (latency=2)
+	mov.l	@(0x1c,r5),r11	! 18 LS (latency=2)
+	movca.l	r0,@r1		! 40 LS (latency=3-7)
+	mov.l	r3,@(0x04,r1)	! 33 LS
+	mov.l	r6,@(0x08,r1)	! 33 LS
+	mov.l	r7,@(0x0c,r1)	! 33 LS
+
+	mov.l	r8,@(0x10,r1)	! 33 LS
+	add	#-0x20, r5	! 50 EX
+
+	mov.l	r9,@(0x14,r1)	! 33 LS
+	cmp/eq	r2,r1		! 54 MT
+
+	mov.l	r10,@(0x18,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11,@(0x1c,r1)	!  33 LS
+
+	mov	r1, r0		!   5 MT (latency=0)
+
+	mov.l	@r15+, r11	!  15 LS
+	sub	r1, r5		!  75 EX
+
+	mov.l	@r15+, r10	!  15 LS
+	cmp/eq	r4, r0		!  54 MT
+
+	bf/s	1f		! 109 BR
+	 mov.l	 @r15+, r9	!  15 LS
+
+	rts
+1:	 mov.l	@r15+, r8	!  15 LS
+	sub	r4, r1		!  75 EX		(len remaining)
+
+	! number of trailing bytes is non-zero
+	!
+	! invariants restored (r5 already decremented by 4)
+	! also r1=num bytes remaining
+
+	mov	#4, r2		!   6 EX
+	mov	r4, r7		!   5 MT (latency=0)
+
+	add	#0x1c, r5	!  50 EX		(back to -4)
+	cmp/hs	r2, r1		!  58 MT
+
+	bf/s	5f		! 108 BR
+	 add	 #11, r7	!  50 EX
+
+	mov.l	@(r0, r5), r6	!  21 LS (latency=2)
+	tst	r2, r1		!  86 MT
+
+	mov	r5, r3		!   5 MT (latency=0)
+	bt/s	4f		! 111 BR
+
+	 add	#-4, r3		!  50 EX
+	cmp/hs	r2, r1		!  58 MT
+
+	bt/s	5f		! 111 BR
+	 mov.l	r6,@-r0		!  30 LS
+
+	! 4 cycles, 2 long words per iteration
+3:	mov.l	@(r0, r5), r6	!  21 LS (latency=2)
+
+4:	mov.l	@(r0, r3), r2	!  21 LS (latency=2)
+	cmp/hi	r7, r0
+
+	mov.l	r6, @-r0	!  30 LS
+	bt/s	3b		! 109 BR
+
+	 mov.l	r2, @-r0	!  30 LS
+
+	! Copy the final 0-3 bytes
+
+5:	cmp/eq	r0, r4		!  54 MT
+	add	#-10, r7	!  50 EX
+
+	bt	9f		! 110 BR
+	add	#3,r5		!  50 EX
+
+	! 3 cycles, 1 byte per iteration
+1:	mov.b	@(r0,r5),r1	!  19 LS
+	cmp/hi	r7,r0		!  57 MT
+
+	bt/s	1b		! 111 BR
+	 mov.b	r1,@-r0		!  28 LS
+
+9:	rts
+	 nop
+
+	!
+	!	GHIJ KLMN OPQR -->  ..GH IJKL MNOP QR..
+	!
+
+	.balign	32
+.Lcase2:
+	! Size is 16 or greater and less then 64, but may have trailing bytes
+
+2:	mov	r5, r6		!   5 MT (latency=0)
+	add	#-2,r5		!  50 EX
+
+	mov	r4,r2		!   5 MT (latency=0)
+	add	#-4,r6		!  50 EX
+
+	add	#7,r2		!  50 EX
+3:	mov.w	@(r0,r5),r1	!  20 LS (latency=2)
+
+	mov.w	@(r0,r6),r3	!  20 LS (latency=2)
+	cmp/hi	r2,r0		!  57 MT
+
+	mov.w	r1,@-r0		!  29 LS
+	bt/s	3b		! 111 BR
+
+	 mov.w	r3,@-r0		!  29 LS
+
+	bra	10f
+	 nop
+
+
+	.balign	32
+.Lcase2b:
+	! Size is at least 64 bytes, so will be going round the big loop at least once.
+	!
+	!   r2 = rounded up r4
+	!   r3 = rounded down r0
+
+	mov	r0, r3		!   5 MT (latency=0)
+	mov	#(~0x1f), r1	!   6 EX
+
+	and	r1, r3		!  78 EX
+	mov	r4, r2		!   5 MT (latency=0)
+
+	cmp/eq	r3, r0		!  54 MT
+	add	#0x1f, r2	!  50 EX
+
+	add	#-2, r5		!  50 EX
+	bt/s	1f		! 110 BR
+	 and	r1, r2		!  78 EX
+
+	! Copy a short word one at a time until we are cache line aligned
+	!   Normal values: r0, r2, r3, r4
+	!   Unused: r1, r6, r7
+	!   Mod: r5 (=r5-2)
+	!
+	add	#2, r3		!  50 EX
+
+2:	mov.w	@(r0,r5),r1	!  20 LS (latency=2)
+	cmp/eq	r3,r0		!  54 MT
+
+	bf/s	2b		! 111 BR
+
+	 mov.w	r1,@-r0		!  29 LS
+
+	! Copy the cache line aligned blocks
+	!
+	! In use: r0, r2, r4, r5 (=r5-2)
+	! Scratch: r1, r3, r6, r7
+	!
+	! We could do this with the four scratch registers, but if src
+	! and dest hit the same cache line, this will thrash, so make
+	! use of additional registers.
+	!
+	! We also need r0 as a temporary (for movca), so 'undo' the invariant:
+	!   r5:	 src (was r0+r5)
+	!   r1:	 dest (was r0)
+	! this can be reversed at the end, so we don't need to save any extra
+	! state.
+	!
+1:	mov.l	r8, @-r15	!  30 LS
+	add	r0, r5		!  49 EX
+
+	mov.l	r9, @-r15	!  30 LS
+	mov	r0, r1		!   5 MT (latency=0)
+
+	mov.l	r10, @-r15	!  30 LS
+	add	#-0x1e, r5	!  50 EX
+
+	mov.l	r11, @-r15	!  30 LS
+
+	mov.l	r12, @-r15	!  30 LS
+
+	! 17 cycles, 32 bytes per iteration
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+2:	mov.w	@r5+, r0	!  14 LS (latency=2)		..JI
+	add	#-0x20, r1	!  50 EX
+
+	mov.l	@r5+, r3	!  15 LS (latency=2)		NMLK
+
+	mov.l	@r5+, r6	!  15 LS (latency=2)		RQPO
+	shll16	r0		! 103 EX			JI..
+
+	mov.l	@r5+, r7	!  15 LS (latency=2)
+	xtrct	r3, r0		!  48 EX			LKJI
+
+	mov.l	@r5+, r8	!  15 LS (latency=2)
+	xtrct	r6, r3		!  48 EX			PONM
+
+	mov.l	@r5+, r9	!  15 LS (latency=2)
+	xtrct	r7, r6		!  48 EX
+
+	mov.l	@r5+, r10	!  15 LS (latency=2)
+	xtrct	r8, r7		!  48 EX
+
+	mov.l	@r5+, r11	!  15 LS (latency=2)
+	xtrct	r9, r8		!  48 EX
+
+	mov.w	@r5+, r12	!  15 LS (latency=2)
+	xtrct	r10, r9		!  48 EX
+
+	movca.l	r0,@r1		!  40 LS (latency=3-7)
+	xtrct	r11, r10	!  48 EX
+
+	mov.l	r3, @(0x04,r1)	!  33 LS
+	xtrct	r12, r11	!  48 EX
+
+	mov.l	r6, @(0x08,r1)	!  33 LS
+
+	mov.l	r7, @(0x0c,r1)	!  33 LS
+
+	mov.l	r8, @(0x10,r1)	!  33 LS
+	add	#-0x40, r5	!  50 EX
+
+	mov.l	r9, @(0x14,r1)	!  33 LS
+	cmp/eq	r2,r1		!  54 MT
+
+	mov.l	r10, @(0x18,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11, @(0x1c,r1)	!  33 LS
+#else
+2:	mov.w	@(0x1e,r5), r0	!  17 LS (latency=2)
+	add	#-2, r5		!  50 EX
+
+	mov.l	@(0x1c,r5), r3	!  18 LS (latency=2)
+	add	#-4, r1		!  50 EX
+
+	mov.l	@(0x18,r5), r6	!  18 LS (latency=2)
+	shll16	r0		! 103 EX
+
+	mov.l	@(0x14,r5), r7	!  18 LS (latency=2)
+	xtrct	r3, r0		!  48 EX
+
+	mov.l	@(0x10,r5), r8	!  18 LS (latency=2)
+	xtrct	r6, r3		!  48 EX
+
+	mov.l	@(0x0c,r5), r9	!  18 LS (latency=2)
+	xtrct	r7, r6		!  48 EX
+
+	mov.l	@(0x08,r5), r10	!  18 LS (latency=2)
+	xtrct	r8, r7		!  48 EX
+
+	mov.l	@(0x04,r5), r11	!  18 LS (latency=2)
+	xtrct	r9, r8		!  48 EX
+
+	mov.w	@(0x02,r5), r12	!  18 LS (latency=2)
+	xtrct	r10, r9		!  48 EX
+
+	movca.l	r0,@r1		!  40 LS (latency=3-7)
+	add	#-0x1c, r1	!  50 EX
+
+	mov.l	r3, @(0x1c,r1)	!  33 LS
+	xtrct	r11, r10	!  48 EX
+
+	mov.l	r6, @(0x18,r1)	!  33 LS
+	xtrct	r12, r11	!  48 EX
+
+	mov.l	r7, @(0x14,r1)	!  33 LS
+
+	mov.l	r8, @(0x10,r1)	!  33 LS
+	add	#-0x3e, r5	!  50 EX
+
+	mov.l	r9, @(0x0c,r1)	!  33 LS
+	cmp/eq	r2,r1		!  54 MT
+
+	mov.l	r10, @(0x08,r1)	!  33 LS
+	bf/s	2b		! 109 BR
+
+	 mov.l	r11, @(0x04,r1)	!  33 LS
+#endif
+
+	mov.l	@r15+, r12
+	mov	r1, r0		!   5 MT (latency=0)
+
+	mov.l	@r15+, r11	!  15 LS
+	sub	r1, r5		!  75 EX
+
+	mov.l	@r15+, r10	!  15 LS
+	cmp/eq	r4, r0		!  54 MT
+
+	bf/s	1f		! 109 BR
+	 mov.l	 @r15+, r9	!  15 LS
+
+	rts
+1:	 mov.l	@r15+, r8	!  15 LS
+
+	add	#0x1e, r5	!  50 EX
+
+	! Finish off a short word at a time
+	! r5 must be invariant - 2
+10:	mov	r4,r2		!   5 MT (latency=0)
+	add	#1,r2		!  50 EX
+
+	cmp/hi	r2, r0		!  57 MT
+	bf/s	1f		! 109 BR
+
+	 add	#2, r2		!  50 EX
+
+3:	mov.w	@(r0,r5),r1	!  20 LS
+	cmp/hi	r2,r0		!  57 MT
+
+	bt/s	3b		! 109 BR
+
+	 mov.w	r1,@-r0		!  29 LS
+1:
+
+	!
+	! Finally, copy the last byte if necessary
+	cmp/eq	r4,r0		!  54 MT
+	bt/s	9b
+	 add	#1,r5
+	mov.b	@(r0,r5),r1
+	rts
+	 mov.b	r1,@-r0
+