sh: pass along struct pci_channel

These patches rework the pci code for the sh architecture.

Currently each board implements some kind of ioport to address mapping.
Some boards use generic_io_base others try passing addresses as io ports.
This is the first set of patches that try to unify the pci code as much
as possible to avoid duplicated code. This will in the end lead to fewer
lines board specific code and more generic code.

This patch makes sure a struct pci_channel pointer is passed along to
various pci functions such as pci_read_reg(), pci_write_reg(),
pci_fixup_pcic(), sh7751_pcic_init() and sh7780_pcic_init().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 16 insertions, 15 deletions

diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index bae6a2cf047d..56f673f66cb5 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -55,7 +55,7 @@ static int __init sh7780_pci_init(void)
 	ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
 
 	/* check for SH7780/SH7780R hardware */
-	id = pci_read_reg(SH7780_PCIVID);
+	id = pci_read_reg(NULL, SH7780_PCIVID);
 	if ((id & 0xffff) == SH7780_VENDOR_ID) {
 		switch ((id >> 16) & 0xffff) {
 		case SH7763_DEVICE_ID:
@@ -82,14 +82,15 @@ static int __init sh7780_pci_init(void)
 		ctrl_outl(0x33333333, INTC_INTPRI);
 	}
 
-	if ((ret = sh4_pci_check_direct()) != 0)
+	if ((ret = sh4_pci_check_direct(NULL)) != 0)
 		return ret;
 
 	return pcibios_init_platform();
 }
 core_initcall(sh7780_pci_init);
 
-int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
+int __init sh7780_pcic_init(struct pci_channel *chan,
+			    struct sh4_pci_address_map *map)
 {
 	u32 word;
 
@@ -101,34 +102,34 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	if (!(map->flags & SH4_PCIC_NO_RESET)) {
 		/* toggle PCI reset pin */
 		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
-		pci_write_reg(word, SH4_PCICR);
+		pci_write_reg(chan, word, SH4_PCICR);
 		/* Wait for a long time... not 1 sec. but long enough */
 		mdelay(100);
 		word = SH4_PCICR_PREFIX;
-		pci_write_reg(word, SH4_PCICR);
+		pci_write_reg(chan, word, SH4_PCICR);
 	}
 
 	/* set the command/status bits to:
 	 * Wait Cycle Control + Parity Enable + Bus Master +
 	 * Mem space enable
 	 */
-	pci_write_reg(0x00000046, SH7780_PCICMD);
+	pci_write_reg(chan, 0x00000046, SH7780_PCICMD);
 
 	/* define this host as the host bridge */
 	word = PCI_BASE_CLASS_BRIDGE << 24;
-	pci_write_reg(word, SH7780_PCIRID);
+	pci_write_reg(chan, word, SH7780_PCIRID);
 
 	/* Set IO and Mem windows to local address
 	 * Make PCI and local address the same for easy 1 to 1 mapping
 	 */
-	pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0);
-	pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1);
+	pci_write_reg(chan, map->window0.size - 0xfffff, SH4_PCILSR0);
+	pci_write_reg(chan, map->window1.size - 0xfffff, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	pci_write_reg(map->window0.base, SH4_PCILAR0);
-	pci_write_reg(map->window0.base, SH7780_PCIMBAR0);
+	pci_write_reg(chan, map->window0.base, SH4_PCILAR0);
+	pci_write_reg(chan, map->window0.base, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
-	pci_write_reg(map->window1.base, SH4_PCILAR1);
-	pci_write_reg(map->window1.base, SH7780_PCIMBAR1);
+	pci_write_reg(chan, map->window1.base, SH4_PCILAR1);
+	pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1);
 
 	/* Map IO space into PCI IO window
 	 * The IO window is 64K-PCIBIOS_MIN_IO in size
@@ -145,12 +146,12 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	 */
 
 	/* Apply any last-minute PCIC fixups */
-	pci_fixup_pcic();
+	pci_fixup_pcic(chan);
 
 	/* SH7780 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
 	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
-	pci_write_reg(word, SH4_PCICR);
+	pci_write_reg(chan, word, SH4_PCICR);
 
 	return 1;
 }