Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 202 insertions, 0 deletions

diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c
new file mode 100644
index 000000000000..68e4c4e4283d
--- /dev/null
+++ b/arch/sh/cchips/hd6446x/hd64465/setup.c
@@ -0,0 +1,202 @@
+/*
+ * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
+ *
+ * Setup and IRQ handling code for the HD64465 companion chip.
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * Copyright (c) 2000 PocketPenguins Inc
+ *
+ * Derived from setup_hd64461.c which bore the message:
+ * Copyright (C) 2000 YAEGASHI Takeshi
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/hd64465/hd64465.h>
+
+static void disable_hd64465_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned short nimr;
+	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
+
+    	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
+	local_irq_save(flags);
+	nimr = inw(HD64465_REG_NIMR);
+	nimr |= mask;
+	outw(nimr, HD64465_REG_NIMR);
+	local_irq_restore(flags);
+}
+
+
+static void enable_hd64465_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned short nimr;
+	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
+
+    	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
+	local_irq_save(flags);
+	nimr = inw(HD64465_REG_NIMR);
+	nimr &= ~mask;
+	outw(nimr, HD64465_REG_NIMR);
+	local_irq_restore(flags);
+}
+
+
+static void mask_and_ack_hd64465(unsigned int irq)
+{
+	disable_hd64465_irq(irq);
+}
+
+
+static void end_hd64465_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_hd64465_irq(irq);
+}
+
+
+static unsigned int startup_hd64465_irq(unsigned int irq)
+{ 
+	enable_hd64465_irq(irq);
+	return 0;
+}
+
+
+static void shutdown_hd64465_irq(unsigned int irq)
+{
+	disable_hd64465_irq(irq);
+}
+
+
+static struct hw_interrupt_type hd64465_irq_type = {
+	.typename	= "HD64465-IRQ",
+	.startup	= startup_hd64465_irq,
+	.shutdown	= shutdown_hd64465_irq,
+	.enable		= enable_hd64465_irq,
+	.disable	= disable_hd64465_irq,
+	.ack		= mask_and_ack_hd64465,
+	.end		= end_hd64465_irq,
+};
+
+
+static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	printk(KERN_INFO
+	       "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
+	       inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));
+
+	return IRQ_NONE;
+}
+
+
+/*====================================================*/
+
+/*
+ * Support for a secondary IRQ demux step.  This is necessary
+ * because the HD64465 presents a very thin interface to the
+ * PCMCIA bus; a lot of features (such as remapping interrupts)
+ * normally done in hardware by other PCMCIA host bridges is
+ * instead done in software.
+ */
+static struct
+{
+    int (*func)(int, void *);
+    void *dev;
+} hd64465_demux[HD64465_IRQ_NUM];
+
+void hd64465_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev)
+{
+    	hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
+    	hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
+}
+EXPORT_SYMBOL(hd64465_register_irq_demux);
+
+void hd64465_unregister_irq_demux(int irq)
+{
+    	hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
+}
+EXPORT_SYMBOL(hd64465_unregister_irq_demux);
+
+
+
+int hd64465_irq_demux(int irq)
+{
+	if (irq == CONFIG_HD64465_IRQ) {
+		unsigned short i, bit;
+		unsigned short nirr = inw(HD64465_REG_NIRR);
+		unsigned short nimr = inw(HD64465_REG_NIMR);
+
+    	    	pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
+		nirr &= ~nimr;
+		for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
+		    if (nirr & bit)
+		    	break;
+
+    	    	if (i < HD64465_IRQ_NUM) {
+		    irq = HD64465_IRQ_BASE + i;
+    	    	    if (hd64465_demux[i].func != 0)
+		    	irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
+		}
+	}
+	return irq;
+}
+
+static struct irqaction irq0  = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL};
+
+
+static int __init setup_hd64465(void)
+{
+	int i;
+	unsigned short rev;
+	unsigned short smscr;
+
+	if (!MACH_HD64465)
+		return 0;
+
+	printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",
+	       CONFIG_HD64465_IOBASE,
+	       CONFIG_HD64465_IRQ,
+	       HD64465_IRQ_BASE,
+	       HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);
+
+	if (inw(HD64465_REG_SDID) != HD64465_SDID) {
+		printk(KERN_ERR "HD64465 device ID not found, check base address\n");
+	}
+
+	rev = inw(HD64465_REG_SRR);
+	printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
+	       
+	outw(0xffff, HD64465_REG_NIMR); 	/* mask all interrupts */
+
+	for (i = 0; i < HD64465_IRQ_NUM ; i++) {
+		irq_desc[HD64465_IRQ_BASE + i].handler = &hd64465_irq_type;
+	}
+
+	setup_irq(CONFIG_HD64465_IRQ, &irq0);
+
+#ifdef CONFIG_SERIAL
+	/* wake up the UART from STANDBY at this point */
+	smscr = inw(HD64465_REG_SMSCR);
+	outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
+
+	/* remap IO ports for first ISA serial port to HD64465 UART */
+	hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
+#endif
+
+	return 0;
+}
+
+module_init(setup_hd64465);