Merge branch 'linus' into x86/kprobes

68 files changed, 0 insertions, 20560 deletions

diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
deleted file mode 100644
index 52ddebe6c6d1..000000000000
--- a/arch/ppc/syslib/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-CFLAGS_prom_init.o      += -fPIC
-CFLAGS_btext.o          += -fPIC
-
-wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
-
-obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
-obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
-obj-$(CONFIG_PPC_OCP)		+= ocp.o
-obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
-obj-$(CONFIG_44x)		+= ibm44x_common.o
-obj-$(CONFIG_440EP)		+= ibm440gx_common.o
-obj-$(CONFIG_440GP)		+= ibm440gp_common.o
-obj-$(CONFIG_440GX)		+= ibm440gx_common.o
-obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
-obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
-ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o
-obj-y				+= virtex_devices.o
-else
-ifeq ($(CONFIG_403),y)
-obj-$(CONFIG_40x)		+= ppc403_pic.o
-else
-obj-$(CONFIG_40x)		+= ppc4xx_pic.o
-endif
-endif
-obj-$(CONFIG_44x)		+= ppc4xx_pic.o
-obj-$(CONFIG_40x)		+= ppc4xx_setup.o
-obj-$(CONFIG_GEN_RTC)		+= todc_time.o
-obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
-obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
-ifeq ($(CONFIG_40x),y)
-obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
-endif
-endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
-				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
-obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
-obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EV64360)		+= todc_time.o
-obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
-obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_HDPU)		+= pci_auto.o
-obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_KATANA)		+= pci_auto.o
-obj-$(CONFIG_MV64360)		+= mv64360_pic.o
-obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
-obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o \
-					pci_auto.o hawk_common.o
-obj-$(CONFIG_OCOTEA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_PAL4)		+= cpc700_pic.o
-obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
-obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o \
-				   todc_time.o pci_auto.o
-obj-$(CONFIG_PRPMC750)		+= open_pic.o pci_auto.o \
-					hawk_common.o
-obj-$(CONFIG_HARRIER)		+= harrier.o
-obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_SBC82xx)		+= todc_time.o
-obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
-				   todc_time.o
-obj-$(CONFIG_TAISHAN)		+= pci_auto.o
-obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
-				   ppc_sys.o
-obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o
-obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
-obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
-ifeq ($(CONFIG_PPC_GEN550),y)
-obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
-endif
-ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
-endif
-obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
-obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
-					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
-ifeq ($(CONFIG_PPC_MPC52xx),y)
-obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
-
-obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
deleted file mode 100644
index d11667046f21..000000000000
--- a/arch/ppc/syslib/btext.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Procedures for drawing on the screen early on in the boot process.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-
-#include <asm/sections.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-
-#define NO_SCROLL
-
-#ifndef NO_SCROLL
-static void scrollscreen(void);
-#endif
-
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);
-
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
-
-unsigned long disp_BAT[2] __initdata = {0, 0};
-
-#define cmapsz	(16*256)
-
-static unsigned char vga_font[cmapsz];
-
-int boot_text_mapped;
-int force_printk_to_btext = 0;
-
-boot_infos_t disp_bi;
-
-extern char *klimit;
-
-/*
- * Powermac can use btext_* after boot for xmon,
- * chrp only uses it during early boot.
- */
-#ifdef CONFIG_XMON
-#define BTEXT
-#define BTDATA
-#else
-#define BTEXT	__init
-#define BTDATA	__initdata
-#endif /* CONFIG_XMON */
-
-/*
- * This is called only when we are booted via BootX.
- */
-void __init
-btext_init(boot_infos_t *bi)
-{
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
-	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
-	disp_bi = *bi;
-	boot_text_mapped = 1;
-}
-
-void __init
-btext_welcome(void)
-{
-	unsigned long flags;
-	unsigned long pvr;
-	boot_infos_t* bi = &disp_bi;
-
-	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
-	btext_drawstring("\nlinked at        : 0x");
-	btext_drawhex(KERNELBASE);
-	btext_drawstring("\nframe buffer at  : 0x");
-	btext_drawhex((unsigned long)bi->dispDeviceBase);
-	btext_drawstring(" (phys), 0x");
-	btext_drawhex((unsigned long)bi->logicalDisplayBase);
-	btext_drawstring(" (log)");
-	btext_drawstring("\nklimit           : 0x");
-	btext_drawhex((unsigned long)klimit);
-	btext_drawstring("\nMSR              : 0x");
-	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
-	btext_drawhex(flags);
-	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
-	pvr >>= 16;
-	if (pvr > 1) {
-	    btext_drawstring("\nHID0             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
-	    btext_drawstring("\nICTC             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	btext_drawstring("\n\n");
-}
-
-/* Calc BAT values for mapping the display and store them
- * in disp_BAT.  Those values are then used from head.S to map
- * the display during identify_machine() and MMU_Init()
- *
- * The display is mapped to virtual address 0xD0000000, rather
- * than 1:1, because some some CHRP machines put the frame buffer
- * in the region starting at 0xC0000000 (KERNELBASE).
- * This mapping is temporary and will disappear as soon as the
- * setup done by MMU_Init() is applied.
- *
- * For now, we align the BAT and then map 8Mb on 601 and 16Mb
- * on other PPCs. This may cause trouble if the framebuffer
- * is really badly aligned, but I didn't encounter this case
- * yet.
- */
-void __init
-btext_prepare_BAT(void)
-{
-	boot_infos_t* bi = &disp_bi;
-	unsigned long vaddr = KERNELBASE + 0x10000000;
-	unsigned long addr;
-	unsigned long lowbits;
-
-	addr = (unsigned long)bi->dispDeviceBase;
-	if (!addr) {
-		boot_text_mapped = 0;
-		return;
-	}
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, G3, G4, ... */
-		lowbits = addr & ~0xFF000000UL;
-		addr &= 0xFF000000UL;
-		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
-		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
-	} else {
-		/* 601 */
-		lowbits = addr & ~0xFF800000UL;
-		addr &= 0xFF800000UL;
-		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
-		disp_BAT[1] = addr | BL_8M | 0x40;
-	}
-	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
-		    unsigned long address)
-{
-	boot_infos_t* bi = &disp_bi;
-
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-	bi->logicalDisplayBase = (unsigned char *)address;
-	bi->dispDeviceBase = (unsigned char *)address;
-	bi->dispDeviceRowBytes = pitch;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	boot_text_mapped = 1;
-}
-
-/* Here's a small text engine to use during early boot
- * or for debugging purposes
- *
- * todo:
- *
- *  - build some kind of vgacon with it to enable early printk
- *  - move to a separate file
- *  - add a few video driver hooks to keep in sync with display
- *    changes.
- */
-
-void
-map_boot_text(void)
-{
-	unsigned long base, offset, size;
-	boot_infos_t *bi = &disp_bi;
-	unsigned char *vbase;
-
-	/* By default, we are no longer mapped */
-	boot_text_mapped = 0;
-	if (bi->dispDeviceBase == 0)
-		return;
-	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
-	offset = ((unsigned long) bi->dispDeviceBase) - base;
-	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
-		+ bi->dispDeviceRect[0];
-	vbase = ioremap(base, size);
-	if (vbase == 0)
-		return;
-	bi->logicalDisplayBase = vbase + offset;
-	boot_text_mapped = 1;
-}
-
-/* Calc the base address of a given point (x,y) */
-static unsigned char * BTEXT
-calc_base(boot_infos_t *bi, int x, int y)
-{
-	unsigned char *base;
-
-	base = bi->logicalDisplayBase;
-	if (base == 0)
-		base = bi->dispDeviceBase;
-	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
-	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
-	return base;
-}
-
-/* Adjust the display to a new resolution */
-void
-btext_update_display(unsigned long phys, int width, int height,
-		     int depth, int pitch)
-{
-	boot_infos_t *bi = &disp_bi;
-
-	if (bi->dispDeviceBase == 0)
-		return;
-
-	/* check it's the same frame buffer (within 256MB) */
-	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
-		return;
-
-	bi->dispDeviceBase = (__u8 *) phys;
-	bi->dispDeviceRect[0] = 0;
-	bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRowBytes = pitch;
-	if (boot_text_mapped) {
-		iounmap(bi->logicalDisplayBase);
-		boot_text_mapped = 0;
-	}
-	map_boot_text();
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-}
-
-void BTEXT btext_clearscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j; --j)
-			*(ptr++) = 0;
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-__inline__ void dcbst(const void* addr)
-{
-	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
-}
-
-void BTEXT btext_flushscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j>0; j-=8) {
-			dcbst(ptr);
-			ptr += 8;
-		}
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-#ifndef NO_SCROLL
-static BTEXT void
-scrollscreen(void)
-{
-	boot_infos_t* bi		= &disp_bi;
-	unsigned long *src		= (unsigned long *)calc_base(bi,0,16);
-	unsigned long *dst		= (unsigned long *)calc_base(bi,0,0);
-	unsigned long width		= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-						(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-#ifdef CONFIG_ADB_PMU
-	pmu_suspend();	/* PMU will not shut us down ! */
-#endif
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1] - 16); i++)
-	{
-		unsigned long *src_ptr = src;
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = *(src_ptr++);
-		src += (bi->dispDeviceRowBytes >> 2);
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-	for (i=0; i<16; i++)
-	{
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = 0;
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-#ifdef CONFIG_ADB_PMU
-	pmu_resume();	/* PMU will not shut us down ! */
-#endif
-}
-#endif /* ndef NO_SCROLL */
-
-void BTEXT btext_drawchar(char c)
-{
-	int cline = 0, x;
-
-	if (!boot_text_mapped)
-		return;
-
-	switch (c) {
-	case '\b':
-		if (g_loc_X > 0)
-			--g_loc_X;
-		break;
-	case '\t':
-		g_loc_X = (g_loc_X & -8) + 8;
-		break;
-	case '\r':
-		g_loc_X = 0;
-		break;
-	case '\n':
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-		break;
-	default:
-		draw_byte(c, g_loc_X++, g_loc_Y);
-	}
-	if (g_loc_X >= g_max_loc_X) {
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-	}
-#ifndef NO_SCROLL
-	while (g_loc_Y >= g_max_loc_Y) {
-		scrollscreen();
-		g_loc_Y--;
-	}
-#else
-	/* wrap around from bottom to top of screen so we don't
-	   waste time scrolling each line.  -- paulus. */
-	if (g_loc_Y >= g_max_loc_Y)
-		g_loc_Y = 0;
-	if (cline) {
-		for (x = 0; x < g_max_loc_X; ++x)
-			draw_byte(' ', x, g_loc_Y);
-	}
-#endif
-}
-
-void BTEXT
-btext_drawstring(const char *c)
-{
-	if (!boot_text_mapped)
-		return;
-	while (*c)
-		btext_drawchar(*c++);
-}
-
-void BTEXT
-btext_drawhex(unsigned long v)
-{
-	static char hex_table[] = "0123456789abcdef";
-
-	if (!boot_text_mapped)
-		return;
-	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
-	btext_drawchar(' ');
-}
-
-static void BTEXT
-draw_byte(unsigned char c, long locX, long locY)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned char *base	= calc_base(bi, locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned long)c) * 16];
-	int rb			= bi->dispDeviceRowBytes;
-
-	switch(bi->dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned long *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned long *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned long *)base, rb);
-		break;
-	}
-}
-
-static unsigned long expand_bits_8[16] BTDATA = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned long expand_bits_16[4] BTDATA = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void BTEXT
-draw_byte_32(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_16(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_8(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static unsigned char vga_font[cmapsz] BTDATA = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
-0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
-0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
-0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
-0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
-0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
-0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
-0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
-0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
-0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
-0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
-0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
-0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
-0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
-0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
-0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
-0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
-0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
-0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
-0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
-0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
-0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
-0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
-0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
-0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
-0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
-0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
-0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
-0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
-0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
-0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
-0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
-0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
-0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
-0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
-0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
-0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
-0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
-0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
-0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
-0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
-0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
-0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
-0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
-0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
-0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
-0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
-0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
-0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
-0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
-0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
-0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
-0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
-0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
-0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
-0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
-0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
-0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
-0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
-0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
-0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
-0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
-0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
-0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
-0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
-0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00,
-};
diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h
deleted file mode 100644
index 987e9aa0dd45..000000000000
--- a/arch/ppc/syslib/cpc700.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Header file for IBM CPC700 Host Bridge, et. al.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the defines and macros for the IBM CPC700 host bridge,
- * memory controller, PIC, UARTs, IIC, and Timers.
- */
-
-#ifndef	__PPC_SYSLIB_CPC700_H__
-#define	__PPC_SYSLIB_CPC700_H__
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-/* XXX no barriers? not even any volatiles?  -- paulus */
-#define CPC700_OUT_32(a,d)  (*(u_int *)a = d)
-#define CPC700_IN_32(a)     (*(u_int *)a)
-
-/*
- * PCI Section
- */
-#define CPC700_PCI_CONFIG_ADDR          0xfec00000
-#define CPC700_PCI_CONFIG_DATA          0xfec00004
-
-/* CPU -> PCI memory window 0 */
-#define CPC700_PMM0_LOCAL		0xff400000	/* CPU physical addr */
-#define CPC700_PMM0_MASK_ATTR		0xff400004	/* size and attrs */
-#define CPC700_PMM0_PCI_LOW		0xff400008	/* PCI addr, low word */
-#define CPC700_PMM0_PCI_HIGH		0xff40000c	/* PCI addr, high wd */
-/* CPU -> PCI memory window 1 */
-#define CPC700_PMM1_LOCAL		0xff400010
-#define CPC700_PMM1_MASK_ATTR		0xff400014
-#define CPC700_PMM1_PCI_LOW		0xff400018
-#define CPC700_PMM1_PCI_HIGH		0xff40001c
-/* CPU -> PCI memory window 2 */
-#define CPC700_PMM2_LOCAL		0xff400020
-#define CPC700_PMM2_MASK_ATTR		0xff400024
-#define CPC700_PMM2_PCI_LOW		0xff400028
-#define CPC700_PMM2_PCI_HIGH		0xff40002c
-/* PCI memory -> CPU window 1 */
-#define CPC700_PTM1_MEMSIZE		0xff400030	/* window size */
-#define CPC700_PTM1_LOCAL		0xff400034	/* CPU phys addr */
-/* PCI memory -> CPU window 2 */
-#define CPC700_PTM2_MEMSIZE		0xff400038	/* size and enable */
-#define CPC700_PTM2_LOCAL		0xff40003c
-
-/*
- * PIC Section
- *
- * IBM calls the CPC700's programmable interrupt controller the Universal
- * Interrupt Controller or UIC.
- */
-
-/*
- * UIC Register Addresses.
- */
-#define	CPC700_UIC_UICSR		0xff500880	/* Status Reg (Rd/Clr)*/
-#define	CPC700_UIC_UICSRS		0xff500884	/* Status Reg (Set) */
-#define	CPC700_UIC_UICER		0xff500888	/* Enable Reg */
-#define	CPC700_UIC_UICCR		0xff50088c	/* Critical Reg */
-#define	CPC700_UIC_UICPR		0xff500890	/* Polarity Reg */
-#define	CPC700_UIC_UICTR		0xff500894	/* Trigger Reg */
-#define	CPC700_UIC_UICMSR		0xff500898	/* Masked Status Reg */
-#define	CPC700_UIC_UICVR		0xff50089c	/* Vector Reg */
-#define	CPC700_UIC_UICVCR		0xff5008a0	/* Vector Config Reg */
-
-#define	CPC700_UIC_UICER_ENABLE		0x00000001	/* Enable an IRQ */
-
-#define	CPC700_UIC_UICVCR_31_HI		0x00000000	/* IRQ 31 hi priority */
-#define	CPC700_UIC_UICVCR_0_HI		0x00000001	/* IRQ 0 hi priority */
-#define CPC700_UIC_UICVCR_BASE_MASK	0xfffffffc
-#define CPC700_UIC_UICVCR_ORDER_MASK	0x00000001
-
-/* Specify value of a bit for an IRQ. */
-#define	CPC700_UIC_IRQ_BIT(i)		((0x00000001) << (31 - (i)))
-
-/*
- * UIC Exports...
- */
-extern struct hw_interrupt_type cpc700_pic;
-extern unsigned int cpc700_irq_assigns[32][2];
-
-extern void __init cpc700_init_IRQ(void);
-extern int cpc700_get_irq(void);
-
-#endif	/* __PPC_SYSLIB_CPC700_H__ */
diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c
deleted file mode 100644
index d48e8f45c050..000000000000
--- a/arch/ppc/syslib/cpc700_pic.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Interrupt controller support for IBM Spruce
- *
- * Authors: Mark Greer, Matt Porter, and Johnnie Peters
- *	    mgreer@mvista.com
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-
-#include "cpc700.h"
-
-static void
-cpc700_unmask_irq(unsigned int irq)
-{
-	unsigned int tr_bits;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		tr_bits = CPC700_IN_32(CPC700_UIC_UICTR);
-
-		if ((tr_bits & (1 << (31 - irq))) == 0) {
-			/* level trigger interrupt, clear bit in status
-			 * register */
-			CPC700_OUT_32(CPC700_UIC_UICSR, 1 << (31 - irq));
-		}
-
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] |= CPC700_UIC_IRQ_BIT(irq);
-	
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_irq(unsigned int irq)
-{
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] &=
-			~CPC700_UIC_IRQ_BIT(irq);
-
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_and_ack_irq(unsigned int irq)
-{
-	u_int	bit;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		bit = CPC700_UIC_IRQ_BIT(irq);
-
-		ppc_cached_irq_mask[0] &= ~bit;
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-		CPC700_OUT_32(CPC700_UIC_UICSR, bit); /* Write 1 clears IRQ */
-	}
-	return;
-}
-
-static struct hw_interrupt_type cpc700_pic = {
-	.typename = "CPC700 PIC",
-	.enable = cpc700_unmask_irq,
-	.disable = cpc700_mask_irq,
-	.ack = cpc700_mask_and_ack_irq,
-};
-
-__init static void
-cpc700_pic_init_irq(unsigned int irq)
-{
-	unsigned int tmp;
-
-	/* Set interrupt sense */
-	tmp = CPC700_IN_32(CPC700_UIC_UICTR);
-	if (cpc700_irq_assigns[irq][0] == 0) {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICTR, tmp);
-
-	/* Set interrupt polarity */
-	tmp = CPC700_IN_32(CPC700_UIC_UICPR);
-	if (cpc700_irq_assigns[irq][1]) {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICPR, tmp);
-
-	/* Set interrupt critical */
-	tmp = CPC700_IN_32(CPC700_UIC_UICCR);
-	tmp |= CPC700_UIC_IRQ_BIT(irq);
-	CPC700_OUT_32(CPC700_UIC_UICCR, tmp);
-		
-	return;
-}
-
-__init void
-cpc700_init_IRQ(void)
-{
-	int i;
-
-	ppc_cached_irq_mask[0] = 0;
-	CPC700_OUT_32(CPC700_UIC_UICER, 0x00000000);    /* Disable all irq's */
-	CPC700_OUT_32(CPC700_UIC_UICSR, 0xffffffff);    /* Clear cur intrs */
-	CPC700_OUT_32(CPC700_UIC_UICCR, 0xffffffff);    /* Gen INT not MCP */
-	CPC700_OUT_32(CPC700_UIC_UICPR, 0x00000000);    /* Active low */
-	CPC700_OUT_32(CPC700_UIC_UICTR, 0x00000000);    /* Level Sensitive */
-	CPC700_OUT_32(CPC700_UIC_UICVR, CPC700_UIC_UICVCR_0_HI);
-						        /* IRQ 0 is highest */
-
-	for (i = 0; i < 17; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	for (i = 20; i < 32; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	return;
-}
-
-
-
-/*
- * Find the highest IRQ that generating an interrupt, if any.
- */
-int
-cpc700_get_irq(void)
-{
-	int irq = 0;
-	u_int irq_status, irq_test = 1;
-
-	irq_status = CPC700_IN_32(CPC700_UIC_UICMSR);
-
-	do
-	{
-		if (irq_status & irq_test)
-			break;
-		irq++;
-		irq_test <<= 1;
-	} while (irq < NR_IRQS);
-	
-
-	if (irq == NR_IRQS)
-	    irq = 33;
-
-	return (31 - irq);
-}
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
deleted file mode 100644
index 6cd859d7721f..000000000000
--- a/arch/ppc/syslib/cpm2_common.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- *	2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc8260.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cpm2.h>
-#include <asm/rheap.h>
-
-static void cpm2_dpinit(void);
-cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-cpm2_map_t *cpm2_immr;
-
-#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
-					   of space for CPM as it is larger
-					   than on PQ2 */
-
-void
-cpm2_reset(void)
-{
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-
-	/* Reclaim the DP memory for our use.
-	 */
-	cpm2_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	 */
-	cpmp = &cpm2_immr->im_cpm;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks.  The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers).  Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	volatile uint	*bp;
-
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
-	if (div16)
-		*bp |= CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)&cpm2_immr->im_dprambase[offset];
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
deleted file mode 100644
index fb2d5842641a..000000000000
--- a/arch/ppc/syslib/cpm2_pic.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* The CPM2 internal interrupt controller.  It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "cpm2_pic.h"
-
-static	u_char	irq_to_siureg[] = {
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* bit numbers do not match the docs, these are precomputed so the bit for
- * a given irq is (1 << irq_to_siubit[irq]) */
-static	u_char	irq_to_siubit[] = {
-	 0, 15, 14, 13, 12, 11, 10,  9,
-	 8,  7,  6,  5,  4,  3,  2,  1,
-	 2,  1,  0, 14, 13, 12, 11, 10,
-	 9,  8,  7,  6,  5,  4,  3,  0,
-	31, 30, 29, 28, 27, 26, 25, 24,
-	23, 22, 21, 20, 19, 18, 17, 16,
-	16, 17, 18, 19, 20, 21, 22, 23,
-	24, 25, 26, 27, 28, 29, 30, 31,
-};
-
-static void cpm2_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] |= 1 << bit;
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr, *sipnr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-	sipnr[word] = 1 << bit;
-}
-
-static void cpm2_end_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-
-		irq_nr -= CPM_IRQ_OFFSET;
-		bit = irq_to_siubit[irq_nr];
-		word = irq_to_siureg[irq_nr];
-
-		simr = &(cpm2_immr->im_intctl.ic_simrh);
-		ppc_cached_irq_mask[word] |= 1 << bit;
-		simr[word] = ppc_cached_irq_mask[word];
-		/*
-		 * Work around large numbers of spurious IRQs on PowerPC 82xx
-		 * systems.
-		 */
-		mb();
-	}
-}
-
-static struct hw_interrupt_type cpm2_pic = {
-	.typename = " CPM2 SIU ",
-	.enable = cpm2_unmask_irq,
-	.disable = cpm2_mask_irq,
-	.ack = cpm2_mask_and_ack,
-	.end = cpm2_end_irq,
-};
-
-int cpm2_get_irq(void)
-{
-	int irq;
-        unsigned long bits;
-
-        /* For CPM2, read the SIVEC register and shift the bits down
-         * to get the irq number.         */
-        bits = cpm2_immr->im_intctl.ic_sivec;
-        irq = bits >> 26;
-
-	if (irq == 0)
-		return(-1);
-	return irq+CPM_IRQ_OFFSET;
-}
-
-void cpm2_init_IRQ(void)
-{
-	int i;
-
-	/* Clear the CPM IRQ controller, in case it has any bits set
-	 * from the bootloader
-	 */
-
-	/* Mask out everything */
-	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
-	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
-	wmb();
-
-	/* Ack everything */
-	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
-	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
-	wmb();
-
-	/* Dummy read of the vector */
-	i = cpm2_immr->im_intctl.ic_sivec;
-	rmb();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_sicr = 0;
-	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
-	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
-
-
-	/* Enable chaining to OpenPIC, and make everything level
-	 */
-	for (i = 0; i < NR_CPM_INTS; i++) {
-		irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic;
-		irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/syslib/cpm2_pic.h b/arch/ppc/syslib/cpm2_pic.h
deleted file mode 100644
index 467339337a78..000000000000
--- a/arch/ppc/syslib/cpm2_pic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _PPC_KERNEL_CPM2_H
-#define _PPC_KERNEL_CPM2_H
-
-extern int cpm2_get_irq(void);
-
-extern void cpm2_init_IRQ(void);
-
-#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h
deleted file mode 100644
index 5254d3cdbca6..000000000000
--- a/arch/ppc/syslib/gen550.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * gen550 prototypes
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void gen550_kgdb_map_scc(void);
diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c
deleted file mode 100644
index 9293f5c59099..000000000000
--- a/arch/ppc/syslib/gen550_dbg.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * A library of polled 16550 serial routines.  These are intended to
- * be used to support progress messages, xmon, kgdb, etc. on a
- * variety of platforms.
- *
- * Adapted from lots of code ripped from the arch/ppc/boot/ polled
- * 16550 support.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* For linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <asm/machdep.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#define SERIAL_BAUD	9600
-
-/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
-};
-
-static void (*serial_outb)(unsigned long, unsigned char);
-static unsigned long (*serial_inb)(unsigned long);
-
-static int shift;
-
-unsigned long direct_inb(unsigned long addr)
-{
-	return readb((void __iomem *)addr);
-}
-
-void direct_outb(unsigned long addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)addr);
-}
-
-unsigned long io_inb(unsigned long port)
-{
-	return inb(port);
-}
-
-void io_outb(unsigned long port, unsigned char val)
-{
-	outb(val, port);
-}
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			serial_outb = io_outb;
-			serial_inb = io_inb;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			serial_outb = direct_outb;
-			serial_inb = direct_inb;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-
-	/* save the LCR */
-	lcr = serial_inb(com_port + (UART_LCR << shift));
-	
-	/* Access baud rate */
-	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
-	dlm = serial_inb(com_port + (UART_DLM << shift));
-
-	/*
-	 * Test if serial port is unconfigured
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-	if ((dlm <= 4) && (lcr & 2)) {
-		/* port is configured, put the old LCR back */
-		serial_outb(com_port + (UART_LCR << shift), lcr);
-	}
-	else {
-		/* Input clock. */
-		serial_outb(com_port + (UART_DLL << shift),
-			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
-		serial_outb(com_port + (UART_DLM << shift),
-				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		serial_outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		serial_outb(com_port + (UART_MCR << shift), 0x03);
-
-		/* Clear & enable FIFOs */
-		serial_outb(com_port + (UART_FCR << shift), 0x07);
-	}
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	serial_outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return serial_inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
-
-void
-serial_close(unsigned long com_port)
-{
-}
-
-void
-gen550_init(int i, struct uart_port *serial_req)
-{
-	rs_table[i].io_type = serial_req->iotype;
-	rs_table[i].port = serial_req->iobase;
-	rs_table[i].iomem_base = serial_req->membase;
-	rs_table[i].iomem_reg_shift = serial_req->regshift;
-	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
-}
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-void
-gen550_progress(char *s, unsigned short hex)
-{
-	volatile unsigned int progress_debugport;
-	volatile char c;
-
-	progress_debugport = serial_init(0, NULL);
-
-	serial_putc(progress_debugport, '\r');
-
-	while ((c = *s++) != 0)
-		serial_putc(progress_debugport, c);
-
-	serial_putc(progress_debugport, '\n');
-	serial_putc(progress_debugport, '\r');
-}
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c
deleted file mode 100644
index 987cc0414e6e..000000000000
--- a/arch/ppc/syslib/gen550_kgdb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic 16550 kgdb support intended to be useful on a variety
- * of platforms.  To enable this support, it is necessary to set
- * the CONFIG_GEN550 option.  Any virtual mapping of the serial
- * port(s) to be used can be accomplished by setting
- * ppc_md.early_serial_map to a platform-specific mapping function.
- *
- * Adapted from ppc4xx_kgdb.c.
- *
- * Author: Matt Porter <mporter@kernel.crashing.org>
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-extern unsigned long serial_init(int, void *);
-extern unsigned long serial_getc(unsigned long);
-extern unsigned long serial_putc(unsigned long, unsigned char);
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#elif defined(CONFIG_KGDB_TTYS2)
-#define KGDB_PORT 2
-#elif defined(CONFIG_KGDB_TTYS3)
-#define KGDB_PORT 3
-#else
-#error "invalid kgdb_tty port"
-#endif
-
-static volatile unsigned int kgdb_debugport;
-
-void putDebugChar(unsigned char c)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	serial_putc(kgdb_debugport, c);
-}
-
-int getDebugChar(void)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	return(serial_getc(kgdb_debugport));
-}
-
-void kgdb_interruptible(int enable)
-{
-	return;
-}
-
-void putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-/*
- * Note: gen550_init() must be called already on the port we are going
- * to use.
- */
-void
-gen550_kgdb_map_scc(void)
-{
-	printk(KERN_DEBUG "kgdb init\n");
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-	kgdb_debugport = serial_init(KGDB_PORT, NULL);
-}
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
deleted file mode 100644
index 3b4fcca5d1e1..000000000000
--- a/arch/ppc/syslib/gt64260_pic.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Interrupt controller support for Galileo's GT64260.
- *
- * Author: Chris Zankel <source@mvista.com>
- * Modified by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on sources from Rabeeh Khoury / Galileo Technology
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the specific functions to support the GT64260
- * interrupt controller.
- *
- * The GT64260 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the GT64260.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#define CPU_INTR_STR	"gt64260 cpu interface error"
-#define PCI0_INTR_STR	"gt64260 pci 0 error"
-#define PCI1_INTR_STR	"gt64260 pci 1 error"
-
-/* ========================== forward declaration ========================== */
-
-static void gt64260_unmask_irq(unsigned int);
-static void gt64260_mask_irq(unsigned int);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type gt64260_pic = {
-	.typename = " gt64260_pic ",
-	.enable   = gt64260_unmask_irq,
-	.disable  = gt64260_mask_irq,
-	.ack      = gt64260_mask_irq,
-	.end      = gt64260_unmask_irq,
-};
-
-u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */
-
-static struct mv64x60_handle bh;
-
-/* gt64260_init_irq()
- *
- *  This function initializes the interrupt controller. It assigns
- *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller.
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-gt64260_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]);
-
-	/* use the gt64260 for all (possible) interrupt sources */
-	for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++)
-		irq_desc[i].chip = &gt64260_pic;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: exit", 0x0);
-}
-
-/*
- * gt64260_get_irq()
- *
- *  This function returns the lowest interrupt number of all interrupts that
- *  are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- */
-int
-gt64260_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-	irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if (irq >= 24) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			} else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (gt64260_irq_base + irq);
-}
-
-/* gt64260_unmask_irq()
- *
- *  This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_unmask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* gt64260_mask_irq()
- *
- *  This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_mask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-gt64260_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-gt64260_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init
-gt64260_register_hdlrs(void)
-{
-	int rc;
-
-	/* Register CPU interface error interrupt handler */
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
-		gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe);
-
-	/* Register PCI 0 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24);
-
-	/* Register PCI 1 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24);
-
-	return 0;
-}
-
-arch_initcall(gt64260_register_hdlrs);
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
deleted file mode 100644
index 45b797b3a336..000000000000
--- a/arch/ppc/syslib/harrier.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Motorola MCG Harrier northbridge/memory controller support
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/harrier.h>
-
-/* define defaults for inbound windows */
-#define HARRIER_ITAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-#define HARRIER_MPAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-/*
- * Initialize the inbound window size on a non-monarch harrier.
- */
-void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
-{
-	u16 temps;
-	u32 temp;
-
-	if (in0_size > HARRIER_ITSZ_2GB) {
-		printk
-		    ("harrier_setup_nonmonarch: Invalid window size code %d\n",
-		     in0_size);
-		return;
-	}
-
-	/* Clear the PCI memory enable bit. If we don't, then when the
-	 * inbound windows are enabled below, the corresponding BARs will be
-	 * "live" and start answering to PCI memory reads from their default
-	 * addresses (0x0), which overlap with system RAM.
-	 */
-	temps = in_le16((u16 *) (ppc_reg_base +
-				 HARRIER_XCSR_CONFIG(PCI_COMMAND)));
-	temps &= ~(PCI_COMMAND_MEMORY);
-	out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
-		 temps);
-
-	/* Setup a non-prefetchable inbound window */
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
-
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
-	temp &= ~HARRIER_ITAT_PRE;
-	temp |= HARRIER_ITAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
-
-	/* Enable the message passing block */
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
-	temp |= HARRIER_MPAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
-}
-
-void __init harrier_release_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Set EREADY to allow the line to be pulled up after everyone is
-	 * ready.
-	 */
-	temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-	temp |= HARRIER_EREADY;
-	out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
-}
-
-void __init harrier_wait_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Poll the ERDYS line until it goes high to indicate that all
-	 * non-monarch PrPMCs are ready for bus enumeration (or that there are
-	 * no PrPMCs present).
-	 */
-
-	/* FIXME: Add a timeout of some kind to prevent endless waits. */
-	do {
-
-		temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-
-	} while (!(temp & HARRIER_ERDYS));
-}
-
-/*
- * Initialize the Motorola MCG Harrier host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses and assumes that the mapping of PCI memory space back to system
- * memory is set up correctly by PPCBug.
- */
-int __init
-harrier_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end, ulong processor_mpic_base)
-{
-	uint addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
-	    || ((processor_pci_io_start & 0xffff0000) !=
-		processor_pci_io_start)) {
-		printk("harrier_init: %s\n",
-		       "PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
-		printk("harrier_init: PPC to PCI mappings %s\n",
-		       "must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("harrier_init: %s\n",
-		       "PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("harrier_init: %s\n",
-		       "MPIC address must start on 256 KB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("harrier_init: %s\n",
-		       "pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *       because sanity check above ensures that they are properly
-	 *       aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-#ifdef CONFIG_HARRIER_STORE_GATHERING
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
-#else
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
-#endif
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
-
-	/* Enable MPIC */
-	OpenPIC_Addr = (void *)processor_mpic_base;
-	addr = (processor_mpic_base >> 16) | 1;
-	out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
-	out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
-	      HARRIER_MPIC_OPI_ENABLE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Harrier correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024UL)
-
-static uint harrier_size_table[] __initdata = {
-	0 * MB,			/* 0 ==>    0 MB */
-	32 * MB,		/* 1 ==>   32 MB */
-	64 * MB,		/* 2 ==>   64 MB */
-	64 * MB,		/* 3 ==>   64 MB */
-	128 * MB,		/* 4 ==>  128 MB */
-	128 * MB,		/* 5 ==>  128 MB */
-	128 * MB,		/* 6 ==>  128 MB */
-	256 * MB,		/* 7 ==>  256 MB */
-	256 * MB,		/* 8 ==>  256 MB */
-	256 * MB,		/* 9 ==>  256 MB */
-	512 * MB,		/* a ==>  512 MB */
-	512 * MB,		/* b ==>  512 MB */
-	512 * MB,		/* c ==>  512 MB */
-	1024 * MB,		/* d ==> 1024 MB */
-	1024 * MB,		/* e ==> 1024 MB */
-	2048 * MB,		/* f ==> 2048 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init harrier_get_mem_size(uint xcsr_base)
-{
-	ulong last_addr;
-	int i;
-	uint vend_dev_id;
-	uint *size_table;
-	uint val;
-	uint *csrp;
-	uint size;
-	int size_table_entries;
-
-	vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
-		size_table = harrier_size_table;
-		size_table_entries = sizeof(harrier_size_table) /
-		    sizeof(harrier_size_table[0]);
-	} else {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Harrier", vend_dev_id);
-		return 0;
-	}
-
-	last_addr = 0;
-
-	csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
-	for (i = 0; i < 8; i++) {
-		val = in_be32(csrp++);
-
-		if (val & 0x100) {	/* If enabled */
-			size = val >> HARRIER_SDB_SIZE_SHIFT;
-			size &= HARRIER_SDB_SIZE_MASK;
-			if (size >= size_table_entries) {
-				break;	/* Register not set correctly */
-			}
-			size = size_table[size];
-
-			val &= ~(size - 1);
-			val += size;
-
-			if (val > last_addr) {
-				last_addr = val;
-			}
-		}
-	}
-
-	return last_addr;
-}
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
deleted file mode 100644
index 86821d8753ed..000000000000
--- a/arch/ppc/syslib/hawk_common.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-
-/*
- * The Falcon/Raven and HAWK has 4 sets of registers:
- *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
- *      etc.
- *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- *      MPIC base address.
- *   3) MPIC registers.
- *   4) System Memory Controller (SMC) registers.
- */
-
-/*
- * Initialize the Motorola MCG Raven or HAWK host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses based on the PCI I/O address that is passed in.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- */
-int __init
-hawk_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end,
-	     ulong processor_mpic_base)
-{
-	uint		addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
-	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
-		printk("hawk_init: %s\n",
-			"PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
-		printk("hawk_init: PPC to PCI mappings %s\n",
-			"must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("hawk_init: %s\n",
-			"PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("hawk_init: %s\n",
-			"MPIC address must start on 256 MB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("hawk_init: %s\n",
-			"pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Disable previous PPC->PCI mappings.
-	 */
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
-
-	/*
-	 * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *	 because sanity check above ensures that they are properly
-	 *	 aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
-
-	/* Set up PPC->MPIC mapping on the bridge */
-	addr = processor_mpic_base |
-	        (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
-	/* No write posting for this PCI Mem space */
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
-
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
-
-	hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
-			(processor_pci_io_end - processor_pci_io_start + 1));
-
-	/*
-	 * Set up the indirect method of accessing PCI config space.
-	 * The PCI config addr/data pair based on start addr of PCI I/O space.
-	 */
-	setup_indirect_pci(hose,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
-
-	/*
-	 * Disable previous PCI->PPC mappings.
-	 */
-
-	/* XXXX Put in mappings from PCI bus to processor bus XXXX */
-
-	/*
-	 * Disable MPIC response to PCI I/O space (BAR 0).
-	 * Make MPIC respond to PCI Mem space at specified address.
-	 * (BAR 1).
-	 */
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_0,
-			         0x00000000 | 0x1);
-
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_1,
-			         (processor_mpic_base -
-				 processor_pci_mem_start + 
-				 hose->mem_space.start) | 0x0);
-
-	/* Map MPIC into virtual memory */
-	OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024)
-
-static uint reg_offset_table[] __initdata = {
-	HAWK_SMC_RAM_A_SIZE_REG_OFF,
-	HAWK_SMC_RAM_B_SIZE_REG_OFF,
-	HAWK_SMC_RAM_C_SIZE_REG_OFF,
-	HAWK_SMC_RAM_D_SIZE_REG_OFF,
-	HAWK_SMC_RAM_E_SIZE_REG_OFF,
-	HAWK_SMC_RAM_F_SIZE_REG_OFF,
-	HAWK_SMC_RAM_G_SIZE_REG_OFF,
-	HAWK_SMC_RAM_H_SIZE_REG_OFF
-};
-
-static uint falcon_size_table[] __initdata = {
-	   0 * MB, /* 0 ==>    0 MB */
-	  16 * MB, /* 1 ==>   16 MB */
-	  32 * MB, /* 2 ==>   32 MB */
-	  64 * MB, /* 3 ==>   64 MB */
-	 128 * MB, /* 4 ==>  128 MB */
-	 256 * MB, /* 5 ==>  256 MB */
-        1024 * MB, /* 6 ==> 1024 MB (1 GB) */
-};
-
-static uint hawk_size_table[] __initdata = {
-	  0 * MB, /* 0 ==>    0 MB */
-	 32 * MB, /* 1 ==>   32 MB */
-	 64 * MB, /* 2 ==>   64 MB */
-	 64 * MB, /* 3 ==>   64 MB */
-	128 * MB, /* 4 ==>  128 MB */
-	128 * MB, /* 5 ==>  128 MB */
-	128 * MB, /* 6 ==>  128 MB */
-	256 * MB, /* 7 ==>  256 MB */
-	256 * MB, /* 8 ==>  256 MB */
-	512 * MB, /* 9 ==>  512 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init
-hawk_get_mem_size(uint smc_base)
-{
-	unsigned long	total;
-	int		i, size_table_entries, reg_limit;
-	uint		vend_dev_id;
-	uint		*size_table;
-	u_char		val;
-
-
-	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
-		size_table = falcon_size_table;
-		size_table_entries = sizeof(falcon_size_table) /
-				     sizeof(falcon_size_table[0]);
-
-		reg_limit = FALCON_SMC_REG_COUNT;
-	}
-	else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
-		size_table = hawk_size_table;
-		size_table_entries = sizeof(hawk_size_table) /
-				     sizeof(hawk_size_table[0]);
-		reg_limit = HAWK_SMC_REG_COUNT;
-	}
-	else {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Falcon or HAWK", vend_dev_id);
-		return 0;
-	}
-
-	total = 0;
-
-	/* Check every reg because PPCBug may skip some */
-	for (i=0; i<reg_limit; i++) {
-		val = in_8((u_char *)(smc_base + reg_offset_table[i]));
-
-		if (val & 0x80) {	/* If enabled */
-			val &= 0x0f;
-
-			/* Don't go past end of size_table */
-			if (val < size_table_entries) {
-				total += size_table[val];
-			}
-			else {	/* Register not set correctly */
-				break;
-			}
-		}
-	}
-
-	return total;
-}
-
-int __init
-hawk_mpic_init(unsigned int pci_mem_offset)
-{
-	unsigned short	devid;
-	unsigned int	pci_membase;
-
-	/* Check the first PCI device to see if it is a Raven or Hawk. */
-	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
-	switch (devid) {
-	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
-	case PCI_DEVICE_ID_MOTOROLA_HAWK:
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Read the memory base register. */
-	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Map the MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
-	return 0;
-}
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
deleted file mode 100644
index 559f27c6aefe..000000000000
--- a/arch/ppc/syslib/i8259.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * i8259 interrupt controller driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-
-static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
-
-static unsigned char cached_8259[2] = { 0xff, 0xff };
-#define cached_A1 (cached_8259[0])
-#define cached_21 (cached_8259[1])
-
-static DEFINE_SPINLOCK(i8259_lock);
-
-static int i8259_pic_irq_offset;
-
-/*
- * Acknowledge the IRQ using either the PCI host bridge's interrupt
- * acknowledge feature or poll.  How i8259_init() is called determines
- * which is called.  It should be noted that polling is broken on some
- * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
- */
-int i8259_irq(void)
-{
-	int irq;
-
-	spin_lock(&i8259_lock);
-
-	/* Either int-ack or poll for the IRQ */
-	if (pci_intack)
-		irq = readb(pci_intack);
-	else {
-		/* Perform an interrupt acknowledge cycle on controller 1. */
-		outb(0x0C, 0x20);		/* prepare for poll */
-		irq = inb(0x20) & 7;
-		if (irq == 2 ) {
-			/*
-			 * Interrupt is cascaded so perform interrupt
-			 * acknowledge on controller 2.
-			 */
-			outb(0x0C, 0xA0);	/* prepare for poll */
-			irq = (inb(0xA0) & 7) + 8;
-		}
-	}
-
-	if (irq == 7) {
-		/*
-		 * This may be a spurious interrupt.
-		 *
-		 * Read the interrupt status register (ISR). If the most
-		 * significant bit is not set then there is no valid
-		 * interrupt.
-		 */
-		if (!pci_intack)
-			outb(0x0B, 0x20);	/* ISR register */
-		if(~inb(0x20) & 0x80)
-			irq = -1;
-	}
-
-	spin_unlock(&i8259_lock);
-	return irq + i8259_pic_irq_offset;
-}
-
-static void i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr > 7) {
-		cached_A1 |= 1 << (irq_nr-8);
-		inb(0xA1); 	/* DUMMY */
-		outb(cached_A1, 0xA1);
-		outb(0x20, 0xA0);	/* Non-specific EOI */
-		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
-	} else {
-		cached_21 |= 1 << irq_nr;
-		inb(0x21); 	/* DUMMY */
-		outb(cached_21, 0x21);
-		outb(0x20, 0x20);	/* Non-specific EOI */
-	}
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_set_irq_mask(int irq_nr)
-{
-	outb(cached_A1,0xA1);
-	outb(cached_21,0x21);
-}
-
-static void i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 |= 1 << irq_nr;
-	else
-		cached_A1 |= 1 << (irq_nr-8);
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 &= ~(1 << irq_nr);
-	else
-		cached_A1 &= ~(1 << (irq_nr-8));
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static struct irq_chip i8259_pic = {
-	.typename	= " i8259    ",
-	.mask		= i8259_mask_irq,
-	.disable	= i8259_mask_irq,
-	.unmask		= i8259_unmask_irq,
-	.mask_ack	= i8259_mask_and_ack_irq,
-};
-
-static struct resource pic1_iores = {
-	.name = "8259 (master)",
-	.start = 0x20,
-	.end = 0x21,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic2_iores = {
-	.name = "8259 (slave)",
-	.start = 0xa0,
-	.end = 0xa1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic_edgectrl_iores = {
-	.name = "8259 edge control",
-	.start = 0x4d0,
-	.end = 0x4d1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct irqaction i8259_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "82c59 secondary cascade",
-};
-
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
- */
-void __init i8259_init(unsigned long intack_addr, int offset)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence */
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0x21); /* Select 8086 mode */
-
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0xA1); /* Select 8086 mode */
-
-	/* always read ISR */
-	outb(0x0B, 0x20);
-	outb(0x0B, 0xA0);
-
-	/* Mask all interrupts */
-	outb(cached_A1, 0xA1);
-	outb(cached_21, 0x21);
-
-	spin_unlock_irqrestore(&i8259_lock, flags);
-
-	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
-		set_irq_chip_and_handler(offset + i, &i8259_pic,
-					 handle_level_irq);
-		irq_desc[offset + i].status |= IRQ_LEVEL;
-	}
-
-	/* reserve our resources */
-	setup_irq(offset + 2, &i8259_irqaction);
-	request_resource(&ioport_resource, &pic1_iores);
-	request_resource(&ioport_resource, &pic2_iores);
-	request_resource(&ioport_resource, &pic_edgectrl_iores);
-
-	if (intack_addr != 0)
-		pci_intack = ioremap(intack_addr, 1);
-
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c
deleted file mode 100644
index a3927ec9b5d7..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-
-/*
- * Calculate 440GP clocks
- */
-void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
-				unsigned int sys_clk,
-				unsigned int ser_clk)
-{
-	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
-	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
-	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
-	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
-
-	if (cpc0_sys0 & 0x2){
-		/* Bypass system PLL */
-		p->cpu = p->plb = sys_clk;
-	}
-	else {
-		u32 fbdv, fwdva, fwdvb, m, vco;
-
-		fbdv = (cpc0_sys0 >> 18) & 0x0f;
-		if (!fbdv)
-			fbdv = 16;
-
-		fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
-		fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
-
-    		/* Feedback path */	
-		if (cpc0_sys0 & 0x00000080){
-			/* PerClk */
-			m = fwdvb * opdv * epdv;
-		}
-		else {
-			/* CPU clock */
-			m = fbdv * fwdva;
-    		}
-		vco = sys_clk * m;
-		p->cpu = vco / fwdva;
-		p->plb = vco / fwdvb;
-	}
-
-	p->opb = p->plb / opdv;
-	p->ebc = p->opb / epdv;
-
-	if (cpc0_cr0 & 0x00400000){
-		/* External UART clock */
-		p->uart0 = p->uart1 = ser_clk;
-	}
-	else {
-		/* Internal UART clock */
-    		u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
-		p->uart0 = p->uart1 = p->plb / uart_div;
-	}
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h
deleted file mode 100644
index 94d7835038ad..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
-#define __PPC_SYSLIB_IBM440GP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 13.1 in 440GP user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gp_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
deleted file mode 100644
index 6ad52f4a26e1..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 - 2006 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <syslib/ibm440gx_common.h>
-
-/*
- * Calculate 440GX clocks
- */
-static inline u32 __fix_zero(u32 v, u32 def){
-	return v ? v : def;
-}
-
-void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
-	unsigned int ser_clk)
-{
-	u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
-	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
-	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
-	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
-#ifdef CONFIG_440EP
-	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
-	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
-#endif
-
-	/* Dividers */
-	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
-	u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
-	u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
-	u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
-	u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
-	u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
-	u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
-	u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
-
-	/* Input clocks for primary dividers */
-	u32 clk_a, clk_b;
-
-	if (pllc & 0x40000000){
-		u32 m;
-
-		/* Feedback path */
-		switch ((pllc >> 24) & 7){
-		case 0:
-			/* PLLOUTx */
-			m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
-			break;
-		case 1:
-			/* CPU */
-			m = fwdva * pradv0;
-			break;
-		case 5:
-			/* PERClk */
-			m = fwdvb * prbdv0 * opbdv0 * perdv0;
-			break;
-		default:
-			printk(KERN_EMERG "invalid PLL feedback source\n");
-			goto bypass;
-		}
-		m *= fbdv;
-		p->vco = sys_clk * m;
-		clk_a = p->vco / fwdva;
-		clk_b = p->vco / fwdvb;
-	}
-	else {
-bypass:
-		/* Bypass system PLL */
-		p->vco = 0;
-		clk_a = clk_b = sys_clk;
-	}
-
-	p->cpu = clk_a / pradv0;
-	p->plb = clk_b / prbdv0;
-	p->opb = p->plb / opbdv0;
-	p->ebc = p->opb / perdv0;
-
-	/* UARTs clock */
-	if (uart0 & 0x00800000)
-		p->uart0 = ser_clk;
-	else
-		p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
-
-	if (uart1 & 0x00800000)
-		p->uart1 = ser_clk;
-	else
-		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
-#ifdef CONFIG_440EP
-	if (uart2 & 0x00800000)
-		p->uart2 = ser_clk;
-	else
-		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
-
-	if (uart3 & 0x00800000)
-		p->uart3 = ser_clk;
-	else
-		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
-#endif
-}
-
-/* Issue L2C diagnostic command */
-static inline u32 l2c_diag(u32 addr)
-{
-	mtdcr(DCRN_L2C0_ADDR, addr);
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-	return mfdcr(DCRN_L2C0_DATA);
-}
-
-static irqreturn_t l2c_error_handler(int irq, void* dev)
-{
-	u32 sr = mfdcr(DCRN_L2C0_SR);
-	if (sr & L2C_SR_CPE){
-		/* Read cache trapped address */
-		u32 addr = l2c_diag(0x42000000);
-		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-	if (sr & L2C_SR_TPE){
-		/* Read tag trapped address */
-		u32 addr = l2c_diag(0x82000000) >> 16;
-		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-
-	/* Clear parity errors */
-	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
-		mtdcr(DCRN_L2C0_ADDR, 0);
-		mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-	} else
-		printk(KERN_EMERG "L2C: LRU error\n");
-
-	return IRQ_HANDLED;
-}
-
-/* Enable L2 cache */
-void __init ibm440gx_l2c_enable(void){
-	u32 r;
-	unsigned long flags;
-
-	/* Install error handler */
-	if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
-		printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable SRAM */
-	mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
-
-	/* Enable L2_MODE without ICU/DCU */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
-	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	mtdcr(DCRN_L2C0_ADDR, 0);
-
-	/* Hardware Clear Command */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-
-	/* Clear Cache Parity and Tag Errors */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-
-	/* Enable 64G snoop region starting at 0 */
-	r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP0, r);
-
-	r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP1, r);
-
-	asm volatile ("sync" ::: "memory");
-
-	/* Enable ICU/DCU ports */
-	r = mfdcr(DCRN_L2C0_CFG);
-	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
-		| L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
-	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
-		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-/* Disable L2 cache */
-void __init ibm440gx_l2c_disable(void){
-	u32 r;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable L2C mode */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	/* Enable SRAM */
-	mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR,
-	      SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB1CR,
-	      SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB2CR,
-	      SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB3CR,
-	      SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
-{
-	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
-	   enable it on all other revisions
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
-			strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
-			|| (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
-				== 0 && p->cpu > 667000000))
-		ibm440gx_l2c_disable();
-	else
-		ibm440gx_l2c_enable();
-}
-
-int __init ibm440gx_get_eth_grp(void)
-{
-	return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
-}
-
-void __init ibm440gx_set_eth_grp(int group)
-{
-	SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
-}
-
-void __init ibm440gx_tah_enable(void)
-{
-	/* Enable TAH0 and TAH1 */
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH0);
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH1);
-}
-
-int ibm440gx_show_cpuinfo(struct seq_file *m){
-
-	u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
-	const char* s;
-	if (l2c_cfg & L2C_CFG_L2M){
-	    switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
-		case L2C_CFG_ICU: s = "I-Cache only";    break;
-		case L2C_CFG_DCU: s = "D-Cache only";    break;
-		default:	  s = "I-Cache/D-Cache"; break;
-	    }
-	}
-	else
-	    s = "disabled";
-
-	seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
-	    l2c_cfg, mfdcr(DCRN_L2C0_SR));
-
-	return 0;
-}
-
-void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
-				   unsigned long r5, unsigned long r6,
-				   unsigned long r7)
-{
-	/* Erratum 440_43 workaround, disable L1 cache parity checking */
-	if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
-	    !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
-		mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
-
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-}
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
deleted file mode 100644
index 8d6f203e7a1d..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GX_COMMON_H
-#define __PPC_SYSLIB_IBM440GX_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 14.1 in 440GX user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-/* common 440GX platform init */
-void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			    unsigned long r6, unsigned long r7) __init;
-
-/* Enable L2 cache */
-void ibm440gx_l2c_enable(void) __init;
-
-/* Disable L2 cache */
-void ibm440gx_l2c_disable(void) __init;
-
-/* Enable/disable L2 cache for a particular chip revision */
-void ibm440gx_l2c_setup(struct ibm44x_clocks*) __init;
-
-/* Get Ethernet Group */
-int ibm440gx_get_eth_grp(void) __init;
-
-/* Set Ethernet Group */
-void ibm440gx_set_eth_grp(int group) __init;
-
-/* Enable TAH devices */
-void ibm440gx_tah_enable(void) __init;
-
-/* Add L2C info to /proc/cpuinfo */
-int ibm440gx_show_cpuinfo(struct seq_file*);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GX_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
deleted file mode 100644
index 571f8bcf78e6..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * PPC440SP/PPC440SPe system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/param.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Read the 440SP memory controller to get size of system memory.
- */
-unsigned long __init ibm440sp_find_end_of_memory(void)
-{
-	u32 i;
-	u32 mem_size = 0;
-
-	/* Read two bank sizes and sum */
-	for (i=0; i< MQ0_NUM_BANKS; i++)
-		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
-			case MQ0_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case MQ0_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case MQ0_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case MQ0_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case MQ0_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case MQ0_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case MQ0_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-			case MQ0_CONFIG_SIZE_1G:
-				mem_size += PPC44x_MEM_SIZE_1G;
-				break;
-			case MQ0_CONFIG_SIZE_2G:
-				mem_size += PPC44x_MEM_SIZE_2G;
-				break;
-			default:
-				break;
-		}
-	return mem_size;
-}
diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h
deleted file mode 100644
index 8077bf8ed118..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * PPC440SP system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440SP_COMMON_H
-#define __PPC_SYSLIB_IBM440SP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long __init ibm440sp_find_end_of_memory(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440SP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
deleted file mode 100644
index 01f99b4a6649..000000000000
--- a/arch/ppc/syslib/ibm44x_common.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * PPC44x system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/initrd.h>
-
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/param.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-
-/* Global Variables */
-bd_t __res;
-
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
-	phys_addr_t page_4gb = 0;
-
-        /*
-	 * Trap the least significant 32-bit portions of an
-	 * address in the 440's 36-bit address space.  Fix
-	 * them up with the appropriate ERPN
-	 */
-	if ((addr >= PPC44x_IO_LO) && (addr <= PPC44x_IO_HI))
-		page_4gb = PPC44x_IO_PAGE;
-	else if ((addr >= PPC44x_PCI0CFG_LO) && (addr <= PPC44x_PCI0CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#ifdef CONFIG_440SP
-	else if ((addr >= PPC44x_PCI1CFG_LO) && (addr <= PPC44x_PCI1CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-	else if ((addr >= PPC44x_PCI2CFG_LO) && (addr <= PPC44x_PCI2CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#endif
-	else if ((addr >= PPC44x_PCIMEM_LO) && (addr <= PPC44x_PCIMEM_HI))
-		page_4gb = PPC44x_PCIMEM_PAGE;
-
-	return (page_4gb | addr);
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
-void __init ibm44x_calibrate_decr(unsigned int freq)
-{
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
-extern void abort(void);
-
-static void ibm44x_restart(char *cmd)
-{
-	local_irq_disable();
-	abort();
-}
-
-static void ibm44x_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void ibm44x_halt(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-/*
- * Read the 44x memory controller to get size of system memory.
- */
-static unsigned long __init ibm44x_find_end_of_memory(void)
-{
-	u32 i, bank_config;
-	u32 mem_size = 0;
-
-	for (i=0; i<4; i++)
-	{
-		switch (i)
-		{
-			case 0:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
-				break;
-			case 1:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
-				break;
-			case 2:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
-				break;
-			case 3:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
-				break;
-		}
-
-		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
-		if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
-			continue;
-		switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
-		{
-			case SDRAM_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case SDRAM_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case SDRAM_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case SDRAM_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case SDRAM_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case SDRAM_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case SDRAM_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-		}
-	}
-	return mem_size;
-}
-
-void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-				 unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif  /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	ppc_md.init_IRQ = ppc4xx_pic_init;
-	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
-	ppc_md.restart = ibm44x_restart;
-	ppc_md.power_off = ibm44x_power_off;
-	ppc_md.halt = ibm44x_halt;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-#if !defined(CONFIG_BDI_SWITCH)
-	/* Enable internal debug mode */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-
-	/* Clear any residual debug events */
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
-	       mfdcr(DCRN_PLB0_BESRL));
-	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
-	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
-	       mfdcr(DCRN_PLB1_BESRL));
-#else
-    	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
-		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
-#endif
-	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
-		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
-		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
-	printk("OPB0: BEAR=0x%08x%08x BSTAT=0x%08x\n",
-		mfdcr(DCRN_OPB0_BEARH), mfdcr(DCRN_OPB0_BEARL),
-		mfdcr(DCRN_OPB0_BSTAT));
-}
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
deleted file mode 100644
index f179db8634e0..000000000000
--- a/arch/ppc/syslib/ibm44x_common.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PPC44x system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM44x_COMMON_H
-#define __PPC_SYSLIB_IBM44x_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * All clocks are in Hz
- */
-struct ibm44x_clocks {
-	unsigned int vco;	/* VCO, 0 if system PLL is bypassed */
-	unsigned int cpu;	/* CPUCoreClk */
-	unsigned int plb;	/* PLBClk */
-	unsigned int opb;	/* OPBClk */
-	unsigned int ebc;	/* PerClk */
-	unsigned int uart0;
-	unsigned int uart1;
-#ifdef CONFIG_440EP
-	unsigned int uart2;
-	unsigned int uart3;
-#endif
-};
-
-/* common 44x platform init */
-void ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7) __init;
-
-/* initialize decrementer and tick-related variables */
-void ibm44x_calibrate_decr(unsigned int freq) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM44x_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c
deleted file mode 100644
index 2ee176610e7c..000000000000
--- a/arch/ppc/syslib/ibm_ocp.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <linux/module.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-
-struct ocp_sys_info_data ocp_sys_info = {
-	.opb_bus_freq	=	50000000,	/* OPB Bus Frequency (Hz) */
-	.ebc_bus_freq	=	33333333,	/* EBC Bus Frequency (Hz) */
-};
-
-EXPORT_SYMBOL(ocp_sys_info);
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
deleted file mode 100644
index 83b323a7d029..000000000000
--- a/arch/ppc/syslib/indirect_pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_PPC_INDIRECT_PCI_BE
-#define PCI_CFG_OUT out_be32
-#else
-#define PCI_CFG_OUT out_le32
-#endif
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	indirect_read_config,
-	indirect_write_config
-};
-
-void __init
-setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-	void __iomem * cfg_data)
-{
-	hose->cfg_addr = cfg_addr;
-	hose->cfg_data = cfg_data;
-	hose->ops = &indirect_pci_ops;
-}
-
-void __init
-setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	unsigned long base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase, *addr, *data;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	data = mbase + (cfg_data & ~PAGE_MASK);
-	setup_indirect_pci_nomap(hose, addr, data);
-}
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
deleted file mode 100644
index ebb8c8f8f30c..000000000000
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Workaround for device erratum PCI 9.
- * See Motorola's "XPC826xA Family Device Errata Reference."
- * The erratum applies to all 8260 family Hip4 processors.  It is scheduled 
- * to be fixed in HiP4 Rev C.  Erratum PCI 9 states that a simultaneous PCI 
- * inbound write transaction and PCI outbound read transaction can result in a 
- * bus deadlock.  The suggested workaround is to use the IDMA controller to 
- * perform all reads from PCI configuration, memory, and I/O space.
- *
- * Author:  andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/byteorder.h>
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-#ifdef CONFIG_8260_PCI9
-/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
-
-#define IDMA_XFER_BUF_SIZE 64	/* size of the IDMA transfer buffer */
-
-/* define a structure for the IDMA dpram usage */
-typedef struct idma_dpram_s {
-	idma_t pram;				/* IDMA parameter RAM */
-	u_char xfer_buf[IDMA_XFER_BUF_SIZE];	/* IDMA transfer buffer */
-	idma_bd_t bd;				/* buffer descriptor */
-} idma_dpram_t;
-
-/* define offsets relative to start of IDMA dpram */
-#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
-#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
-
-/* define globals */
-static volatile idma_dpram_t *idma_dpram;
-
-/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, 
- * where n is 1, 2, 3, or 4.  This selects the IDMA channel used for 
- * the PCI9 workaround.
- */
-#ifdef CONFIG_8260_PCI9_IDMA1
-#define IDMA_CHAN 0
-#define PROFF_IDMA PROFF_IDMA1_BASE
-#define IDMA_PAGE CPM_CR_IDMA1_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA2
-#define IDMA_CHAN 1
-#define PROFF_IDMA PROFF_IDMA2_BASE
-#define IDMA_PAGE CPM_CR_IDMA2_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA3
-#define IDMA_CHAN 2
-#define PROFF_IDMA PROFF_IDMA3_BASE
-#define IDMA_PAGE CPM_CR_IDMA3_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA4
-#define IDMA_CHAN 3
-#define PROFF_IDMA PROFF_IDMA4_BASE
-#define IDMA_PAGE CPM_CR_IDMA4_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
-#endif
-
-void idma_pci9_init(void)
-{
-	uint dpram_offset;
-	volatile idma_t *pram;
-	volatile im_idma_t *idma_reg;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	/* allocate IDMA dpram */
-	dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
-	idma_dpram = cpm_dpram_addr(dpram_offset); 
-
-	/* initialize the IDMA parameter RAM */
-	memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
-	pram = &idma_dpram->pram;
-	pram->ibase = dpram_offset + IDMA_BD_OFFSET;
-	pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
-	pram->ss_max = 32;
-	pram->dts = 32;
-
-	/* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
-	*((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
-
-	/* initialize the IDMA registers */
-	idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
-	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
-	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
-
-	printk(KERN_WARNING
-		"Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
-		IDMA_CHAN + 1);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The src address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The dst address must be a kernel virtual 
- * address.  The dst address is translated to a physical address via 
- * virt_to_phys().
- * The sinc argument specifies whether or not the source address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The destination address is always incremented since the 
- * destination is always host RAM.
- */
-static void 
-idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (sinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = virt_to_phys(dst);
-	bd->src = (uint) src;
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The dst address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The src address must be a kernel virtual 
- * address.  The src address is translated to a physical address via 
- * virt_to_phys().
- * The dinc argument specifies whether or not the dest address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The source address is always incremented since the 
- * source is always host RAM.
- */
-static void 
-idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (dinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = (uint) dst;
-	bd->src = virt_to_phys(src);
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
- * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
- * the unit_size is 4.
- */
-static void 
-idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	int i;
-	u8 *p;
-
-	idma_pci9_read(dst, src, bytes, unit_size, sinc);
-	switch(unit_size) {
-		case 2:
-			for (i = 0, p = dst; i < bytes; i += 2, p += 2)
-				swab16s((u16 *) p);
-			break;
-		case 4:
-			for (i = 0, p = dst; i < bytes; i += 4, p += 4)
-				swab32s((u32 *) p);
-			break;
-		default:
-			break;
-	}
-}
-EXPORT_SYMBOL(idma_pci9_init);
-EXPORT_SYMBOL(idma_pci9_read);
-EXPORT_SYMBOL(idma_pci9_read_le);
-
-static inline int is_pci_mem(unsigned long addr)
-{
-	if (addr >= M82xx_PCI_LOWER_MMIO &&
-		addr <= M82xx_PCI_UPPER_MMIO)
-		return 1;
-	if (addr >= M82xx_PCI_LOWER_MEM &&
-		addr <= M82xx_PCI_UPPER_MEM)
-		return 1;
-	return 0;
-}
-
-#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
-int readb(volatile unsigned char *addr)
-{
-	u8 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_8(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int readw(volatile unsigned short *addr)
-{
-	u16 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le16(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned readl(volatile unsigned *addr)
-{
-	u32 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le32(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-int inb(unsigned port)
-{
-	u8 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int inw(unsigned port)
-{
-	u16 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned inl(unsigned port)
-{
-	u32 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-void insb(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
-}
-
-void insw(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
-}
-
-void insl(unsigned port, void *buf, int nl)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
-}
-
-void *memcpy_fromio(void *dest, unsigned long src, size_t count)
-{
-	unsigned long pa = iopa((unsigned long) src);
-
-	if (is_pci_mem(pa))
-		idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
-	else
-		memcpy(dest, (void *)src, count);
-	return dest;
-}
-
-EXPORT_SYMBOL(readb);
-EXPORT_SYMBOL(readw);
-EXPORT_SYMBOL(readl);
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(memcpy_fromio);
-
-#endif	/* ifdef CONFIG_8260_PCI9 */
-
-/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
- * Copyright (C) 1998 Gabriel Paubert.
- */
-#ifndef CONFIG_8260_PCI9
-#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
-#else
-#define cfg_read(val, addr, type, op) \
-	idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
-#endif
-
-#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
-
-static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
-			break;
-		case 2:
-			cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
-			break;
-		case 4:
-			cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 *value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
-			break;
-		case 2:
-			cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
-			break;
-		case 4:
-			cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void
-setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	hose->ops = &indirect_pci_ops;
-	hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
-	hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
-}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
deleted file mode 100644
index b40583724de3..000000000000
--- a/arch/ppc/syslib/m8260_setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx and 8260 by Dan.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/ppc_sys.h>
-
-#include "cpm2_pic.h"
-
-unsigned char __res[sizeof(bd_t)];
-
-extern void pq2_find_bridges(void);
-extern void pq2pci_init_irq(void);
-extern void idma_pci9_init(void);
-
-/* Place-holder for board-specific init */
-void __attribute__ ((weak)) __init
-m82xx_board_setup(void)
-{
-}
-
-static void __init
-m8260_setup_arch(void)
-{
-	/* Print out Vendor and Machine info. */
-	printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
-
-	/* Reset the Communication Processor Module. */
-	cpm2_reset();
-#ifdef CONFIG_8260_PCI9
-	/* Initialise IDMA for PCI erratum workaround */
-	idma_pci9_init();
-#endif
-#ifdef CONFIG_PCI_8260
-	pq2_find_bridges();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-#endif
-
-	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
-			in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
-
-	m82xx_board_setup();
-}
-
-/* The decrementer counts at the system (internal) clock frequency
- * divided by four.
- */
-static void __init
-m8260_calibrate_decr(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-	int freq, divisor;
-
-	freq = binfo->bi_busfreq;
-        divisor = 4;
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-/* The 8260 has an internal 1-second timer update register that
- * we should use for this purpose.
- */
-static uint rtc_time;
-
-static int
-m8260_set_rtc_time(unsigned long time)
-{
-	rtc_time = time;
-
-	return(0);
-}
-
-static unsigned long
-m8260_get_rtc_time(void)
-{
-	/* Get time from the RTC.
-	*/
-	return((unsigned long)rtc_time);
-}
-
-#ifndef BOOTROM_RESTART_ADDR
-#warning "Using default BOOTROM_RESTART_ADDR!"
-#define BOOTROM_RESTART_ADDR	0xff000104
-#endif
-
-static void
-m8260_restart(char *cmd)
-{
-	extern void m8260_gorom(bd_t *bi, uint addr);
-	uint	startaddr;
-
-	/* Most boot roms have a warmstart as the second instruction
-	 * of the reset vector.  If that doesn't work for you, change this
-	 * or the reboot program to send a proper address.
-	 */
-	startaddr = BOOTROM_RESTART_ADDR;
-	if (cmd != NULL) {
-		if (!strncmp(cmd, "startaddr=", 10))
-			startaddr = simple_strtoul(&cmd[10], NULL, 0);
-	}
-
-	m8260_gorom((void*)__pa(__res), startaddr);
-}
-
-static void
-m8260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-m8260_power_off(void)
-{
-	m8260_halt();
-}
-
-static int
-m8260_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	seq_printf(m, "vendor\t\t: %s\n"
-		   "machine\t\t: %s\n"
-		   "\n"
-		   "mem size\t\t: 0x%08lx\n"
-		   "console baud\t\t: %ld\n"
-		   "\n"
-		   "core clock\t: %lu MHz\n"
-		   "CPM  clock\t: %lu MHz\n"
-		   "bus  clock\t: %lu MHz\n",
-		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
-		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
-		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
-	return 0;
-}
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 8260 family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8260_init_IRQ(void)
-{
-	cpm2_init_IRQ();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
-}
-
-/*
- * Same hack as 8xx
- */
-static unsigned long __init
-m8260_find_end_of_memory(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/* Map the IMMR, plus anything else we can cover
- * in that upper space according to the memory controller
- * chip select mapping.  Grab another bunch of space
- * below that for stuff we can't cover in the upper.
- */
-static void __init
-m8260_map_io(void)
-{
-	uint addr;
-
-	/* Map IMMR region to a 256MB BAT */
-	addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
-	io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
-
-	/* Map I/O region to a 256MB BAT */
-	io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
-}
-
-/* Place-holder for board-specific ppc_md hooking */
-void __attribute__ ((weak)) __init
-m82xx_board_init(void)
-{
-}
-
-/* Inputs:
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 ) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 ) {
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	ppc_md.setup_arch		= m8260_setup_arch;
-	ppc_md.show_cpuinfo		= m8260_show_cpuinfo;
-	ppc_md.init_IRQ			= m8260_init_IRQ;
-	ppc_md.get_irq			= cpm2_get_irq;
-
-	ppc_md.restart			= m8260_restart;
-	ppc_md.power_off		= m8260_power_off;
-	ppc_md.halt			= m8260_halt;
-
-	ppc_md.set_rtc_time		= m8260_set_rtc_time;
-	ppc_md.get_rtc_time		= m8260_get_rtc_time;
-	ppc_md.calibrate_decr		= m8260_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8260_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8260_map_io;
-
-	/* Call back for board-specific settings and overrides. */
-	m82xx_board_init();
-}
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
deleted file mode 100644
index 657a1c25a2ab..000000000000
--- a/arch/ppc/syslib/m82xx_pci.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-/*
- * Interrupt routing
- */
-
-static inline int
-pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	  A      B      C      D
-	 */
-	{
-		{ PIRQA, PIRQB, PIRQC, PIRQD },	/* IDSEL 22 - PCI slot 0 */
-		{ PIRQD, PIRQA, PIRQB, PIRQC },	/* IDSEL 23 - PCI slot 1 */
-		{ PIRQC, PIRQD, PIRQA, PIRQB },	/* IDSEL 24 - PCI slot 2 */
-	};
-
-	const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void
-pq2pci_mask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_unmask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_mask_and_ack(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_end_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-struct hw_interrupt_type pq2pci_ic = {
-	"PQ2 PCI",
-	NULL,
-	NULL,
-	pq2pci_unmask_irq,
-	pq2pci_mask_irq,
-	pq2pci_mask_and_ack,
-	pq2pci_end_irq,
-	0
-};
-
-static irqreturn_t
-pq2pci_irq_demux(int irq, void *dev_id)
-{
-	unsigned long stat, mask, pend;
-	int bit;
-
-	for(;;) {
-		stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
-		mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
-		pend = stat & ~mask & 0xf0000000;
-		if (!pend)
-			break;
-		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-			if (pend & 0x80000000)
-				__do_IRQ(NR_CPM_INTS + bit);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pq2pci_irqaction = {
-	.handler = pq2pci_irq_demux,
-	.flags 	 = IRQF_DISABLED,
-	.mask	 = CPU_MASK_NONE,
-	.name	 = "PQ2 PCI cascade",
-};
-
-
-void
-pq2pci_init_irq(void)
-{
-	int irq;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
-		irq_desc[irq].chip = &pq2pci_ic;
-
-	/* make PCI IRQ level sensitive */
-	immap->im_intctl.ic_siexr &=
-		~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
-
-	/* mask all PCI interrupts */
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
-
-	/* install the demultiplexer for the PCI cascade interrupt */
-	setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
-	return;
-}
-
-static int
-pq2pci_exclude_device(u_char bus, u_char devfn)
-{
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI bus configuration registers.
- */
-static void
-pq2ads_setup_pci(struct pci_controller *hose)
-{
-	__u32 val;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	bd_t* binfo = (bd_t*) __res;
-	u32 sccr = immap->im_clkrst.car_sccr;
-	uint pci_div,freq,time;
-		/* PCI int lowest prio */
-	/* Each 4 bits is a device bus request	and the MS 4bits
-	 is highest priority */
-	/* Bus                4bit value
-	   ---                ----------
-	   CPM high      	0b0000
-	   CPM middle           0b0001
-	   CPM low       	0b0010
-	   PCI request          0b0011
-	   Reserved      	0b0100
-	   Reserved      	0b0101
-	   Internal Core     	0b0110
-	   External Master 1 	0b0111
-	   External Master 2 	0b1000
-	   External Master 3 	0b1001
-	   The rest are reserved
-	 */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-	/* park bus on core */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
-	/*
-	 * Set up master windows that allow the CPU to access PCI space. These
-	 * windows are set up using the two SIU PCIBR registers.
-	 */
-
-	immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
-	immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
-
-#ifdef M82xx_PCI_SEC_WND_SIZE
-	immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
-	immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
-#endif
-
-	/* Enable PCI  */
-	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
-	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-	time = (int)66666666/freq;
-
-	/* due to PCI Local Bus spec, some devices needs to wait such a long
-	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
-	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
-	(time==1) ? "0.5 seconds":"1 second" );
-
-	{
-		int i;
-		for(i=0;i<(500*time);i++)
-			udelay(1000);
-	}
-
-	/* setup ATU registers */
-	immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
-				((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
-
-	/* Set-up non-prefetchable window */
-	immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
-
-	/* Set-up prefetchable window */
-	immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
-		(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
-
- 	/* Inbound transactions from PCI memory space */
-	immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
-					((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
-	immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
-	immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
-
-	/* park bus on PCI */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-	/* Enable bus mastering and inbound memory transactions */
-	early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
-	val &= 0xffff0000;
-	val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
-	early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
-
-}
-
-void __init pq2_find_bridges(void)
-{
-	extern int pci_assign_all_buses;
-	struct pci_controller * hose;
-	int host_bridge;
-
-	pci_assign_all_buses = 1;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-
-	hose->first_busno = 0;
-	hose->bus_offset = 0;
-	hose->last_busno = 0xff;
-
-	setup_m8260_indirect_pci(hose,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-	/* Make sure it is a supported bridge */
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				PCI_VENDOR_ID,
-				&host_bridge);
-	switch (host_bridge) {
-		case PCI_DEVICE_ID_MPC8265:
-			break;
-		case PCI_DEVICE_ID_MPC8272:
-			break;
-		default:
-			printk("Attempting to use unrecognized host bridge ID"
-				" 0x%08x.\n", host_bridge);
-			break;
-	}
-
-	pq2ads_setup_pci(hose);
-
-	hose->io_space.start =	M82xx_PCI_LOWER_IO;
-	hose->io_space.end = M82xx_PCI_UPPER_IO;
-	hose->mem_space.start = M82xx_PCI_LOWER_MEM;
-	hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
-	hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
-
-	isa_io_base =
-	(unsigned long) ioremap(M82xx_PCI_IO_BASE,
-					M82xx_PCI_IO_SIZE);
-	hose->io_base_virt = (void *) isa_io_base;
-
-	/* setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			M82xx_PCI_LOWER_MEM,
-			M82xx_PCI_UPPER_MEM,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			M82xx_PCI_LOWER_MMIO,
-			M82xx_PCI_UPPER_MMIO,
-			IORESOURCE_MEM, "PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			M82xx_PCI_LOWER_IO,
-			M82xx_PCI_UPPER_IO,
-			IORESOURCE_IO | 1, "PCI I/O");
-
-	ppc_md.pci_exclude_device = pq2pci_exclude_device;
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_map_irq = pq2pci_map_irq;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-
-}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
deleted file mode 100644
index 924f73f8e595..000000000000
--- a/arch/ppc/syslib/m82xx_pci.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#ifndef _PPC_KERNEL_M82XX_PCI_H
-#define _PPC_KERNEL_M82XX_PCI_H
-
-#include <asm/m8260_pci.h>
-/*
- *   Local->PCI map (from CPU)                             controlled by
- *   MPC826x master window
- *
- *   0xF6000000 - 0xF7FFFFFF    IO space
- *   0x80000000 - 0xBFFFFFFF    CPU2PCI memory space       PCIBR0
- *
- *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
- *   0xA0000000 - 0xBFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
- *   0xF6000000 - 0xF7FFFFFF    32-bit PCI IO              (Outbound ATU #3)
- *
- *   PCI->Local map (from PCI)
- *   MPC826x slave window                                  controlled by
- *
- *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
-#define M82xx_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_BUS		(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-
-#ifndef M82xx_PCI_LOWER_MEM
-#define M82xx_PCI_LOWER_MEM		0x80000000
-#define M82xx_PCI_UPPER_MEM		0x9fffffff
-#define M82xx_PCI_MEM_OFFSET		0x00000000
-#define M82xx_PCI_MEM_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_MMIO
-#define M82xx_PCI_LOWER_MMIO		0xa0000000
-#define M82xx_PCI_UPPER_MMIO		0xafffffff
-#define M82xx_PCI_MMIO_OFFSET		0x00000000
-#define M82xx_PCI_MMIO_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_IO
-#define M82xx_PCI_LOWER_IO		0x00000000
-#define M82xx_PCI_UPPER_IO		0x01ffffff
-#define M82xx_PCI_IO_BASE		0xf6000000
-#define M82xx_PCI_IO_SIZE		0x02000000
-#endif
-
-#ifndef M82xx_PCI_PRIM_WND_SIZE
-#define M82xx_PCI_PRIM_WND_SIZE 	~(M82xx_PCI_IO_SIZE - 1U)
-#define M82xx_PCI_PRIM_WND_BASE		(M82xx_PCI_IO_BASE)
-#endif
-
-#ifndef M82xx_PCI_SEC_WND_SIZE
-#define M82xx_PCI_SEC_WND_SIZE 		~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
-#define M82xx_PCI_SEC_WND_BASE 		(M82xx_PCI_LOWER_MEM)
-#endif
-
-#ifndef POTA_ADDR_SHIFT
-#define POTA_ADDR_SHIFT		12
-#endif
-
-#ifndef PITA_ADDR_SHIFT
-#define PITA_ADDR_SHIFT		12
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
-					u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
deleted file mode 100644
index 18da720fc1b0..000000000000
--- a/arch/ppc/syslib/m8xx_setup.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx by Dan.
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
-#include <asm/mmu.h>
-#include <asm/reg.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/xmon.h>
-#include <asm/ppc_sys.h>
-
-#include "ppc8xx_pic.h"
-
-#ifdef CONFIG_MTD_PHYSMAP
-#define MPC8xxADS_BANK_WIDTH 4
-#endif
-
-#define MPC8xxADS_U_BOOT_SIZE          0x80000
-#define MPC8xxADS_FREE_AREA_OFFSET     MPC8xxADS_U_BOOT_SIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
- /*
-   NOTE: bank width and interleave relative to the installed flash
-   should have been chosen within MTD_CFI_GEOMETRY options.
- */
-static struct mtd_partition mpc8xxads_partitions[] = {
-	{
-		.name = "bootloader",
-		.size = MPC8xxADS_U_BOOT_SIZE,
-		.offset = 0,
-		.mask_flags   = MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name = "User FS",
-		.offset = MPC8xxADS_FREE_AREA_OFFSET
-	}
-};
-
-#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
-
-#endif
-
-static int m8xx_set_rtc_time(unsigned long time);
-static unsigned long m8xx_get_rtc_time(void);
-void m8xx_calibrate_decr(void);
-
-unsigned char __res[sizeof(bd_t)];
-
-extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset(void);
-extern void m8xx_wdt_handler_install(bd_t *bp);
-extern void rpxfb_alloc_pages(void);
-extern void cpm_interrupt_init(void);
-
-void __attribute__ ((weak))
-board_init(void)
-{
-}
-
-void __init
-m8xx_setup_arch(void)
-{
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-	bd_t *binfo = (bd_t *)__res;
-#endif
-
-	/* Reset the Communication Processor Module.
-	*/
-	m8xx_cpm_reset();
-
-#ifdef CONFIG_FB_RPX
-	rpxfb_alloc_pages();
-#endif
-
-#ifdef notdef
-	ROOT_DEV = Root_HDA1; /* hda1 */
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-#if 0
-	ROOT_DEV = Root_FD0; /* floppy */
-	rd_prompt = 1;
-	rd_doload = 1;
-	rd_image_start = 0;
-#endif
-#if 0	/* XXX this may need to be updated for the new bootmem stuff,
-	   or possibly just deleted (see set_phys_avail() in init.c).
-	   - paulus. */
-	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
-	if ( initrd_start )
-	{
-		if (initrd_end > *memory_end_p)
-		{
-			printk("initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       initrd_end,*memory_end_p);
-			initrd_start = 0;
-		}
-	}
-#endif
-#endif
-
-	board_init();
-}
-
-void
-abort(void)
-{
-#ifdef CONFIG_XMON
-	xmon(0);
-#endif
-	machine_restart(NULL);
-
-	/* not reached */
-	for (;;);
-}
-
-/* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
-{
-	printk ("timebase_interrupt()\n");
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "tbint",
-};
-
-/* per-board overridable init_internal_rtc() function. */
-void __init __attribute__ ((weak))
-init_internal_rtc(void)
-{
-	/* Disable the RTC one second and alarm interrupts. */
-	clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
-
-	/* Enable the RTC */
-	setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
-
-}
-
-/* The decrementer counts at the system (internal) clock frequency divided by
- * sixteen, or external oscillator divided by four.  We force the processor
- * to use system clock divided by sixteen.
- */
-void __init m8xx_calibrate_decr(void)
-{
-	bd_t	*binfo = (bd_t *)__res;
-	int freq, fp, divisor;
-
-	/* Unlock the SCCR. */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
-
-	/* Force all 8xx processors to use divide by 16 processor clock. */
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000);
-	/* Processor frequency is MHz.
-	 * The value 'fp' is the number of decrementer ticks per second.
-	 */
-	fp = binfo->bi_intfreq / 16;
-	freq = fp*60;	/* try to make freq/1e6 an integer */
-        divisor = 60;
-        printk("Decrementer Frequency = %d/%d\n", freq, divisor);
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
-	/* Perform some more timer/timebase initialization.  This used
-	 * to be done elsewhere, but other changes caused it to get
-	 * called more than once....that is a bad thing.
-	 *
-	 * First, unlock all of the registers we are going to modify.
-	 * To protect them from corruption during power down, registers
-	 * that are maintained by keep alive power are "locked".  To
-	 * modify these registers we have to write the key value to
-	 * the key location associated with the register.
-	 * Some boards power up with these unlocked, while others
-	 * are locked.  Writing anything (including the unlock code?)
-	 * to the unlocked registers will lock them again.  So, here
-	 * we guarantee the registers are locked, then we unlock them
-	 * for our use.
-	 */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
-
-	init_internal_rtc();
-
-	/* Enabling the decrementer also enables the timebase interrupts
-	 * (or from the other point of view, to get decrementer interrupts
-	 * we have to enable the timebase).  The decrementer interrupt
-	 * is wired into the vector table, nothing to do here for that.
-	 */
-	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
-
-	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
-		panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
-	/* Install watchdog timer handler early because it might be
-	 * already enabled by the bootloader
-	 */
-	m8xx_wdt_handler_install(binfo);
-#endif
-}
-
-/* The RTC on the MPC8xx is an internal register.
- * We want to protect this during power down, so we need to unlock,
- * modify, and re-lock.
- */
-static int
-m8xx_set_rtc_time(unsigned long time)
-{
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
-	return(0);
-}
-
-static unsigned long
-m8xx_get_rtc_time(void)
-{
-	/* Get time from the RTC. */
-	return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
-}
-
-static void
-m8xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080);
-	/* Clear the ME bit in MSR to cause checkstop on machine check
-	*/
-	mtmsr(mfmsr() & ~0x1000);
-
-	dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
-	printk("Restart failed\n");
-	while(1);
-}
-
-static void
-m8xx_power_off(void)
-{
-   m8xx_restart(NULL);
-}
-
-static void
-m8xx_halt(void)
-{
-   m8xx_restart(NULL);
-}
-
-
-static int
-m8xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	bd_t	*bp;
-
-	bp = (bd_t *)__res;
-
-	seq_printf(m, "clock\t\t: %uMHz\n"
-		   "bus clock\t: %uMHz\n",
-		   bp->bi_intfreq / 1000000,
-		   bp->bi_busfreq / 1000000);
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct irqaction mbx_i8259_irqaction = {
-	.handler = mbx_i8259_action,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 cascade",
-};
-#endif
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 82xx family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8xx_init_IRQ(void)
-{
-	int i;
-
-	for (i = SIU_IRQ_OFFSET ; i < SIU_IRQ_OFFSET + NR_SIU_INTS ; i++)
-		irq_desc[i].chip = &ppc8xx_pic;
-
-	cpm_interrupt_init();
-
-#if defined(CONFIG_PCI)
-	for (i = I8259_IRQ_OFFSET ; i < I8259_IRQ_OFFSET + NR_8259_INTS ; i++)
-		irq_desc[i].chip = &i8259_pic;
-
-	i8259_pic_irq_offset = I8259_IRQ_OFFSET;
-	i8259_init(0);
-
-	/* The i8259 cascade interrupt must be level sensitive. */
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT));
-	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
-		enable_irq(ISA_BRIDGE_INT);
-#endif	/* CONFIG_PCI */
-}
-
-/* -------------------------------------------------------------------- */
-
-/*
- * This is a big hack right now, but it may turn into something real
- * someday.
- *
- * For the 8xx boards (at this time anyway), there is nothing to initialize
- * associated the PROM.  Rather than include all of the prom.c
- * functions in the image just to get prom_init, all we really need right
- * now is the initialization of the physical memory region.
- */
-static unsigned long __init
-m8xx_find_end_of_memory(void)
-{
-	bd_t	*binfo;
-	extern unsigned char __res[];
-
-	binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/*
- * Now map in some of the I/O space that is generically needed
- * or shared with multiple devices.
- * All of this fits into the same 4Mbyte region, so it only
- * requires one page table page.  (or at least it used to  -- paulus)
- */
-static void __init
-m8xx_map_io(void)
-{
-        io_block_mapping(IMAP_ADDR, IMAP_ADDR, IMAP_SIZE, _PAGE_IO);
-#ifdef CONFIG_MBX
-        io_block_mapping(NVRAM_ADDR, NVRAM_ADDR, NVRAM_SIZE, _PAGE_IO);
-        io_block_mapping(MBX_CSR_ADDR, MBX_CSR_ADDR, MBX_CSR_SIZE, _PAGE_IO);
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-
-	/* Map some of the PCI/ISA I/O space to get the IDE interface.
-	*/
-        io_block_mapping(PCI_ISA_IO_ADDR, PCI_ISA_IO_ADDR, 0x4000, _PAGE_IO);
-        io_block_mapping(PCI_IDE_ADDR, PCI_IDE_ADDR, 0x4000, _PAGE_IO);
-#endif
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	io_block_mapping(RPX_CSR_ADDR, RPX_CSR_ADDR, RPX_CSR_SIZE, _PAGE_IO);
-#if !defined(CONFIG_PCI)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-#endif
-#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
-	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_FADS
-	io_block_mapping(BCSR_ADDR, BCSR_ADDR, BCSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_PCI
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-#endif
-#if defined(CONFIG_NETTA)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_PCI
-	m8xx_setup_pci_ptrs();
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 )
-	{
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	identify_ppc_sys_by_name(BOARD_CHIP_NAME);
-
-	ppc_md.setup_arch		= m8xx_setup_arch;
-	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
-	ppc_md.init_IRQ			= m8xx_init_IRQ;
-	ppc_md.get_irq			= m8xx_get_irq;
-	ppc_md.init			= NULL;
-
-	ppc_md.restart			= m8xx_restart;
-	ppc_md.power_off		= m8xx_power_off;
-	ppc_md.halt			= m8xx_halt;
-
-	ppc_md.time_init		= NULL;
-	ppc_md.set_rtc_time		= m8xx_set_rtc_time;
-	ppc_md.get_rtc_time		= m8xx_get_rtc_time;
-	ppc_md.calibrate_decr		= m8xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8xx_map_io;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
deleted file mode 100644
index fffac8cbeb51..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * m8xx_wdt.c - MPC8xx watchdog driver
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <syslib/m8xx_wdt.h>
-
-static int wdt_timeout;
-int m8xx_has_internal_rtc = 0;
-
-static irqreturn_t m8xx_wdt_interrupt(int, void *);
-static struct irqaction m8xx_wdt_irqaction = {
-	.handler = m8xx_wdt_interrupt,
-	.name = "watchdog",
-};
-
-void m8xx_wdt_reset(void)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	out_be16(&imap->im_siu_conf.sc_swsr, 0x556c);	/* write magic1 */
-	out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39);	/* write magic2 */
-}
-
-static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	m8xx_wdt_reset();
-
-	setbits16(&imap->im_sit.sit_piscr, PISCR_PS);
-	return IRQ_HANDLED;
-}
-
-#define SYPCR_SWP 0x1
-#define SYPCR_SWE 0x4
-
-
-void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo)
-{
-	u32 pitc;
-	u32 pitrtclk;
-
-	/*
-	 * Fire trigger if half of the wdt ticked down 
-	 */
-
-	if (imap->im_sit.sit_rtcsc & RTCSC_38K)
-		pitrtclk = 9600;
-	else
-		pitrtclk = 8192;
-
-	if ((wdt_timeout) > (UINT_MAX / pitrtclk))
-		pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2;
-	else
-		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
-
-	out_be32(&imap->im_sit.sit_pitc, pitc << 16);
-
-	out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
-
-	if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
-		panic("m8xx_wdt: error setting up the watchdog irq!");
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
-
-}
-
-static void m8xx_wdt_timer_func(unsigned long data);
-
-static struct timer_list m8xx_wdt_timer =
-	TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0);
-
-void m8xx_wdt_stop_timer(void)
-{
-	del_timer(&m8xx_wdt_timer);
-}
-
-void m8xx_wdt_install_timer(void)
-{
-	m8xx_wdt_timer.expires = jiffies + (HZ/2);
-	add_timer(&m8xx_wdt_timer);
-}
-
-static void m8xx_wdt_timer_func(unsigned long data)
-{
-	m8xx_wdt_reset();
-	m8xx_wdt_install_timer();
-}
-
-void __init m8xx_wdt_handler_install(bd_t * binfo)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-	u32 sypcr;
-
-	sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
-
-	if (!(sypcr & SYPCR_SWE)) {
-		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
-		       sypcr);
-		return;
-	}
-
-	m8xx_wdt_reset();
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
-	       (sypcr >> 16), sypcr & SYPCR_SWP);
-
-	wdt_timeout = (sypcr >> 16) & 0xFFFF;
-
-	if (!wdt_timeout)
-		wdt_timeout = 0xFFFF;
-
-	if (sypcr & SYPCR_SWP)
-		wdt_timeout *= 2048;
-
-	m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE;
-
-	/* if the internal RTC is off use a kernel timer */
-	if (!m8xx_has_internal_rtc) {
-		if (wdt_timeout < (binfo->bi_intfreq/HZ))
-			printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n");
-		m8xx_wdt_install_timer();
-	} else
-		m8xx_wdt_install_irq(imap, binfo);
-
-	wdt_timeout /= binfo->bi_intfreq;
-}
-
-int m8xx_wdt_get_timeout(void)
-{
-	return wdt_timeout;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
deleted file mode 100644
index e75835f0012b..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_SYSLIB_M8XX_WDT_H
-#define _PPC_SYSLIB_M8XX_WDT_H
-
-extern int m8xx_has_internal_rtc;
-
-extern void m8xx_wdt_handler_install(bd_t * binfo);
-extern int m8xx_wdt_get_timeout(void);
-extern void m8xx_wdt_reset(void);
-extern void m8xx_wdt_install_timer(void);
-extern void m8xx_wdt_stop_timer(void);
-
-#endif				/* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
deleted file mode 100644
index 437a294527a9..000000000000
--- a/arch/ppc/syslib/mpc10x_common.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/mpc10x.h>
-#include <asm/ppc_sys.h>
-
-#ifdef CONFIG_MPC10X_OPENPIC
-#ifdef CONFIG_EPIC_SERIAL_MODE
-#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
-#else
-#define EPIC_IRQ_BASE 5
-#endif
-#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
-#else
-#define MPC10X_I2C_IRQ -1
-#define MPC10X_DMA0_IRQ -1
-#define MPC10X_DMA1_IRQ -1
-#define MPC10X_UART0_IRQ -1
-#define MPC10X_UART1_IRQ -1
-#endif
-
-static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
-	.device_flags		= 0,
-};
-
-static struct plat_serial8250_port serial_plat_uart0[] = {
-	[0] = {
-		.mapbase	= 0x4500,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-static struct plat_serial8250_port serial_plat_uart1[] = {
-	[0] = {
-		.mapbase	= 0x4600,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC10X_IIC1] = {
-		.name 	= "fsl-i2c",
-		.id	= 1,
-		.dev.platform_data = &mpc10x_i2c_pdata,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_I2C_OFFSET,
-				.end	= MPC10X_EUMB_I2C_OFFSET +
-		                            MPC10X_EUMB_I2C_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags 	= IORESOURCE_IRQ
-			},
-		},
-	},
-	[MPC10X_DMA0] = {
-		.name	= "fsl-dma",
-		.id	= 0,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_DMA_OFFSET + 0x10,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_UART0] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data = serial_plat_uart0,
-	},
-	[MPC10X_UART1] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev.platform_data = serial_plat_uart1,
-	},
-
-};
-
-/* We use the PCI ID to match on */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name 	= "8245",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8245,
-		.num_devices	= 5,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1,
-		},
-	},
-	{
-		.ppc_sys_name 	= "8240",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8240,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{
-		.ppc_sys_name	= "107",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_107,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{       /* default match */
-		.ppc_sys_name   = "",
-		.mask           = 0x00000000,
-		.value          = 0x00000000,
-	},
-};
-
-/*
- * mach_mpc10x_fixup: This function enables DUART mode if it detects
- * if it detects two UARTS in the platform device entries.
- */
-static int __init mach_mpc10x_fixup(struct platform_device *pdev)
-{
-	if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
-		writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
-				serial_plat_uart1[0].membase + 0x11);
-	return 0;
-}
-
-static int __init mach_mpc10x_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc10x_fixup;
-	return 0;
-}
-postcore_initcall(mach_mpc10x_init);
-
-/* Set resources to match bridge memory map */
-void __init
-mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
-{
-
-	switch (map) {
-		case MPC10X_MEM_MAP_A:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x3f7fffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0xc0000000,
-					0xfeffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		case MPC10X_MEM_MAP_B:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x00bfffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0x80000000,
-					0xfcffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		default:
-			printk("mpc10x_bridge_set_resources: "
-					"Invalid map specified\n");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-	}
-}
-
-/*
- * Do some initialization and put the EUMB registers at the specified address
- * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
- *
- * The EPIC is not on the 106, only the 8240 and 107.
- */
-int __init
-mpc10x_bridge_init(struct pci_controller *hose,
-		   uint current_map,
-		   uint new_map,
-		   uint phys_eumb_base)
-{
-	int	host_bridge, picr1, picr1_bit, i;
-	ulong	pci_config_addr, pci_config_data;
-	u_char	pir, byte;
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
-
-	/* Set up for current map so we can get at config regs */
-	switch (current_map) {
-		case MPC10X_MEM_MAP_A:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPA_CNFG_ADDR,
-					   MPC10X_MAPA_CNFG_DATA);
-			break;
-		case MPC10X_MEM_MAP_B:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPB_CNFG_ADDR,
-					   MPC10X_MAPB_CNFG_DATA);
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid current map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-			return -1;
-	}
-
-	/* Make sure it's a supported bridge */
-	early_read_config_dword(hose,
-			        0,
-			        PCI_DEVFN(0,0),
-			        PCI_VENDOR_ID,
-			        &host_bridge);
-
-	switch (host_bridge) {
-		case MPC10X_BRIDGE_106:
-		case MPC10X_BRIDGE_8240:
-		case MPC10X_BRIDGE_107:
-		case MPC10X_BRIDGE_8245:
-			break;
-		default:
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit2", 0x100);
-			return -1;
-	}
-
-	switch (new_map) {
-		case MPC10X_MEM_MAP_A:
-			MPC10X_SETUP_HOSE(hose, A);
-			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPA_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
-			break;
-		case MPC10X_MEM_MAP_B:
-			MPC10X_SETUP_HOSE(hose, B);
-			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPB_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid new map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit3", 0x100);
-			return -1;
-	}
-
-	/* Make bridge use the 'new_map', if not already usng it */
-	if (current_map != new_map) {
-		early_read_config_dword(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_PICR1_REG,
-					&picr1);
-
-		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
-			 picr1_bit;
-
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_PICR1_REG,
-					 picr1);
-
-		asm volatile("sync");
-
-		/* Undo old mappings & map in new cfg data/addr regs */
-		iounmap((void *)hose->cfg_addr);
-		iounmap((void *)hose->cfg_data);
-
-		setup_indirect_pci(hose,
-				   pci_config_addr,
-				   pci_config_data);
-	}
-
-	/* Setup resources to match map */
-	mpc10x_bridge_set_resources(new_map, hose);
-
-	/*
-	 * Want processor accesses of 0xFDxxxxxx to be mapped
-	 * to PCI memory space at 0x00000000.  Do not want
-	 * host bridge to respond to PCI memory accesses of
-	 * 0xFDxxxxxx.  Do not want host bridge to respond
-	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
-	 * want processor accesses from 0x000A0000-0x000BFFFF
-	 * to be forwarded to system memory.
-	 *
-	 * Only valid if not in agent mode and using MAP B.
-	 */
-	if (new_map == MPC10X_MEM_MAP_B) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_MAPB_OPTIONS_REG,
-				       &byte);
-
-		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
-			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
-			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
-
-		if (host_bridge != MPC10X_BRIDGE_106) {
-			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
-		}
-
-		early_write_config_byte(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_MAPB_OPTIONS_REG,
-					byte);
-	}
-
-	if (host_bridge != MPC10X_BRIDGE_106) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_PIR_REG,
-				       &pir);
-
-		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
-			printk("Host bridge in Agent mode\n");
-			/* Read or Set LMBAR & PCSRBAR? */
-		}
-
-		/* Set base addr of the 8240/107 EUMB.  */
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_EUMBBAR,
-					 phys_eumb_base);
-#ifdef CONFIG_MPC10X_OPENPIC
-		/* Map EPIC register part of EUMB into vitual memory  - PCORE
-		   uses an i8259 instead of EPIC. */
-		OpenPIC_Addr =
-			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
-				MPC10X_EUMB_EPIC_SIZE);
-#endif
-	}
-
-#ifdef CONFIG_MPC10X_STORE_GATHERING
-	mpc10x_enable_store_gathering(hose);
-#else
-	mpc10x_disable_store_gathering(hose);
-#endif
-
-	/* setup platform devices for MPC10x bridges */
-	identify_ppc_sys_by_id (host_bridge);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
-			phys_eumb_base);
-	}
-
-	/* IRQs are determined at runtime */
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
-
-	serial_plat_uart0[0].mapbase += phys_eumb_base;
-	serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
-	serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100);
-
-	serial_plat_uart1[0].mapbase += phys_eumb_base;
-	serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
-	serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100);
-
-	/*
-	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
-	 * PCI reads may return stale data so turn off.
-	 */
-	if ((host_bridge == MPC10X_BRIDGE_8240)
-		|| (host_bridge == MPC10X_BRIDGE_8245)
-		|| (host_bridge == MPC10X_BRIDGE_107)) {
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, &picr1);
-
-		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, picr1);
-	}
-
-	/*
-	 * 8241/8245 erratum 28: PCI reads from local memory may return
-	 * stale data.  Workaround by setting PICR2[0] to disable copyback
-	 * optimization.  Oddly, the latest available user manual for the
-	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
-	 */
-	if (host_bridge == MPC10X_BRIDGE_8245) {
-		u32	picr2;
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR2_REG, &picr2);
-
-		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			 MPC10X_CFG_PICR2_REG, picr2);
-	}
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
-	return 0;
-}
-
-/*
- * Need to make our own PCI config space access macros because
- * mpc10x_get_mem_size() is called before the data structures are set up for
- * the 'early_xxx' and 'indirect_xxx' routines to work.
- * Assumes bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
-#if 0	/* Not used */
-MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
-MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
-MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
-MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
-#endif
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.
- */
-unsigned long __init
-mpc10x_get_mem_size(uint mem_map)
-{
-	uint			*config_addr, *config_data, val;
-	ulong			start, end, total, offset;
-	int			i;
-	u_char			bank_enables;
-
-	switch (mem_map) {
-		case MPC10X_MEM_MAP_A:
-			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
-			break;
-		case MPC10X_MEM_MAP_B:
-			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
-			break;
-		default:
-			return 0;
-	}
-
-	mpc10x_read_config_byte(config_addr,
-				config_data,
-				PCI_DEVFN(0,0),
-			        MPC10X_MCTLR_MEM_BANK_ENABLES,
-			        &bank_enables);
-
-	total = 0;
-
-	for (i=0; i<8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
-
-int __init
-mpc10x_enable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-int __init
-mpc10x_disable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-#ifdef CONFIG_MPC10X_OPENPIC
-void __init mpc10x_set_openpic(void)
-{
-	/* Map external IRQs */
-	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
-	/* Skip reserved space and map i2c and DMA Ch[01] */
-	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
-	/* Skip reserved space and map Message Unit Interrupt (I2O) */
-	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
-	/* Skip reserved space and map Serial Interrupts */
-	openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
-
-	openpic_init(NUM_8259_INTERRUPTS);
-}
-#endif
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
deleted file mode 100644
index 7487539a4e92..000000000000
--- a/arch/ppc/syslib/mpc52xx_devices.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Freescale MPC52xx device descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/fsl_devices.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-
-
-static u64 mpc52xx_dma_mask = 0xffffffffULL;
-
-static struct fsl_i2c_platform_data mpc52xx_fsl_i2c_pdata = {
-	.device_flags = FSL_I2C_DEV_CLOCK_5200,
-};
-
-
-/* We use relative offsets for IORESOURCE_MEM to be independent from the
- * MBAR location at compile time
- */
-
-/* TODO Add the BestComm initiator channel to the device definitions,
-   possibly using IORESOURCE_DMA. But that's when BestComm is ready ... */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC52xx_MSCAN1] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0900,
-				.end	= 0x097f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN1_IRQ,
-				.end	= MPC52xx_MSCAN1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_MSCAN2] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0980,
-				.end	= 0x09ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN2_IRQ,
-				.end	= MPC52xx_MSCAN2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_SPI] = {
-		.name		= "mpc52xx-spi",
-		.id		= -1,
-		.num_resources	= 3,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x0f00,
-				.end	= 0x0f1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "modf",
-				.start	= MPC52xx_SPI_MODF_IRQ,
-				.end	= MPC52xx_SPI_MODF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "spif",
-				.start	= MPC52xx_SPI_SPIF_IRQ,
-				.end	= MPC52xx_SPI_SPIF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_USB] = {
-		.name		= "ppc-soc-ohci",
-		.id		= -1,
-		.num_resources	= 2,
-		.dev.dma_mask	= &mpc52xx_dma_mask,
-		.dev.coherent_dma_mask = 0xffffffffULL,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1000,
-				.end	= 0x10ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_USB_IRQ,
-				.end	= MPC52xx_USB_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_BDLC] = {
-		.name		= "mpc52xx-bdlc",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1300,
-				.end	= 0x130f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_BDLC_IRQ,
-				.end	= MPC52xx_BDLC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC1] = {
-		.name		= "mpc52xx-psc",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2000,
-				.end	= 0x209f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC1_IRQ,
-				.end	= MPC52xx_PSC1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC2] = {
-		.name		= "mpc52xx-psc",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2200,
-				.end	= 0x229f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC2_IRQ,
-				.end	= MPC52xx_PSC2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC3] = {
-		.name		= "mpc52xx-psc",
-		.id		= 2,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2400,
-				.end	= 0x249f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC3_IRQ,
-				.end	= MPC52xx_PSC3_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC4] = {
-		.name		= "mpc52xx-psc",
-		.id		= 3,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2600,
-				.end	= 0x269f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC4_IRQ,
-				.end	= MPC52xx_PSC4_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC5] = {
-		.name		= "mpc52xx-psc",
-		.id		= 4,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2800,
-				.end	= 0x289f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC5_IRQ,
-				.end	= MPC52xx_PSC5_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC6] = {
-		.name		= "mpc52xx-psc",
-		.id		= 5,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2c00,
-				.end	= 0x2c9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC6_IRQ,
-				.end	= MPC52xx_PSC6_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_FEC] = {
-		.name		= "mpc52xx-fec",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3000,
-				.end	= 0x33ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_FEC_IRQ,
-				.end	= MPC52xx_FEC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_ATA] = {
-		.name		= "mpc52xx-ata",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3a00,
-				.end	= 0x3aff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_ATA_IRQ,
-				.end	= MPC52xx_ATA_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C1] = {
-		.name		= "fsl-i2c",
-		.id		= 0,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d00,
-				.end	= 0x3d1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C1_IRQ,
-				.end	= MPC52xx_I2C1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C2] = {
-		.name		= "fsl-i2c",
-		.id		= 1,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d40,
-				.end	= 0x3d5f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C2_IRQ,
-				.end	= MPC52xx_I2C2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-};
-
-
-static int __init mach_mpc52xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, MPC52xx_MBAR);
-	return 0;
-}
-
-static int __init mach_mpc52xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc52xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc52xx_init);
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
deleted file mode 100644
index 20a0eac0dc3a..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * PCI code for the Freescale MPC52xx embedded CPU.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <asm/pci.h>
-
-#include <asm/mpc52xx.h>
-#include "mpc52xx_pci.h"
-
-#include <asm/delay.h>
-#include <asm/machdep.h>
-
-
-/* This macro is defined to activate the workaround for the bug
-   435 of the MPC5200 (L25R). With it activated, we don't do any
-   32 bits configuration access during type-1 cycles */
-#define MPC5200_BUG_435_WORKAROUND
-
-
-static int
-mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				value = in_8(((u8 __iomem *)hose->cfg_data) + (offset & 3));
-				break;
-			case 2:
-				value = in_le16(((u16 __iomem *)hose->cfg_data) + ((offset>>1) & 1));
-				break;
-
-			default:
-				value = in_le16((u16 __iomem *)hose->cfg_data) |
-					(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
-				break;
-		}
-	}
-	else
-#endif
-	{
-		value = in_le32(hose->cfg_data);
-
-		if (len != 4) {
-			value >>= ((offset & 0x3) << 3);
-			value &= 0xffffffff >> (32 - (len << 3));
-		}
-	}
-
-	*val = value;
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value, mask;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				out_8(((u8 __iomem *)hose->cfg_data) +
-					(offset & 3), val);
-				break;
-			case 2:
-				out_le16(((u16 __iomem *)hose->cfg_data) +
-					((offset>>1) & 1), val);
-				break;
-
-			default:
-				out_le16((u16 __iomem *)hose->cfg_data,
-					(u16)val);
-				out_le16(((u16 __iomem *)hose->cfg_data) + 1,
-					(u16)(val>>16));
-				break;
-		}
-	}
-	else
-#endif
-	{
-		if (len != 4) {
-			value = in_le32(hose->cfg_data);
-
-			offset = (offset & 0x3) << 3;
-			mask = (0xffffffff >> (32 - (len << 3)));
-			mask <<= offset;
-
-			value &= ~mask;
-			val = value | ((val << offset) & mask);
-		}
-
-		out_le32(hose->cfg_data, val);
-	}
-	mb();
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mpc52xx_pci_ops = {
-	.read  = mpc52xx_pci_read_config,
-	.write = mpc52xx_pci_write_config
-};
-
-
-static void __init
-mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs)
-{
-	u32 tmp;
-
-	/* Setup control regs */
-	tmp = in_be32(&pci_regs->scr);
-	tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	out_be32(&pci_regs->scr, tmp);
-
-	/* Setup windows */
-	out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MEM_START,
-		MPC52xx_PCI_MEM_SIZE ));
-
-	out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MMIO_START,
-		MPC52xx_PCI_MMIO_SIZE ));
-
-	out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_IO_BASE,
-		MPC52xx_PCI_IO_START,
-		MPC52xx_PCI_IO_SIZE ));
-
-	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw0btar */
-		  MPC52xx_PCI_IWCR_READ_MULTI |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw1btar */
-		  MPC52xx_PCI_IWCR_READ |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw2btar */
-		  MPC52xx_PCI_IWCR_IO )
-	));
-
-
-	out_be32(&pci_regs->tbatr0,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
-	out_be32(&pci_regs->tbatr1,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
-
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
-
-	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
-	/* Not necessary and can be a bad thing if for example the bootloader
-	   is displaying a splash screen or ... Just left here for
-	   documentation purpose if anyone need it */
-	tmp = in_be32(&pci_regs->gscr);
-#if 0
-	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
-	udelay(50);
-#endif
-	out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
-}
-
-static void
-mpc52xx_pci_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	/* We don't rely on boot loader for PCI and resets all
-	   devices */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = &dev->resource[i];
-		if (res->end > res->start) {	/* Only valid resources */
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-		}
-	}
-
-	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
-	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
-	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
-	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
-		struct resource *res = &dev->resource[1];
-		res->start = res->end = res->flags = 0;
-	}
-}
-
-void __init
-mpc52xx_find_bridges(void)
-{
-	struct mpc52xx_pci __iomem *pci_regs;
-	struct pci_controller *hose;
-
-	pci_assign_all_buses = 1;
-
-	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
-	if (!pci_regs)
-		return;
-
-	hose = pcibios_alloc_controller();
-	if (!hose) {
-		iounmap(pci_regs);
-		return;
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->bus_offset = 0;
-	hose->ops = &mpc52xx_pci_ops;
-
-	mpc52xx_pci_setup(pci_regs);
-
-	hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET;
-
-	hose->io_base_virt = ioremap(MPC52xx_PCI_IO_BASE, MPC52xx_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	hose->cfg_addr = &pci_regs->car;
-	hose->cfg_data = hose->io_base_virt;
-
-	/* Setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			MPC52xx_PCI_MEM_START,
-			MPC52xx_PCI_MEM_STOP,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH,
-			"PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			MPC52xx_PCI_MMIO_START,
-			MPC52xx_PCI_MMIO_STOP,
-			IORESOURCE_MEM,
-			"PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			MPC52xx_PCI_IO_START,
-			MPC52xx_PCI_IO_STOP,
-			IORESOURCE_IO,
-			"PCI I/O");
-
-}
diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h
deleted file mode 100644
index 77d47dbba85e..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * PCI Include file the Freescale MPC52xx embedded cpu chips
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Inspired from code written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __SYSLIB_MPC52xx_PCI_H__
-#define __SYSLIB_MPC52xx_PCI_H__
-
-/* ======================================================================== */
-/* PCI windows config                                                       */
-/* ======================================================================== */
-
-/*
- * Master windows : MPC52xx -> PCI
- *
- *  0x80000000 -> 0x9FFFFFFF       PCI Mem prefetchable          IW0BTAR
- *  0xA0000000 -> 0xAFFFFFFF       PCI Mem                       IW1BTAR
- *  0xB0000000 -> 0xB0FFFFFF       PCI IO                        IW2BTAR
- *
- * Slave windows  : PCI -> MPC52xx
- *
- *  0xF0000000 -> 0xF003FFFF       MPC52xx MBAR                  TBATR0
- *  0x00000000 -> 0x3FFFFFFF       MPC52xx local memory          TBATR1
- */
-
-#define MPC52xx_PCI_MEM_OFFSET 	0x00000000	/* Offset for MEM MMIO */
-
-#define MPC52xx_PCI_MEM_START	0x80000000
-#define MPC52xx_PCI_MEM_SIZE	0x20000000
-#define MPC52xx_PCI_MEM_STOP	(MPC52xx_PCI_MEM_START+MPC52xx_PCI_MEM_SIZE-1)
-
-#define MPC52xx_PCI_MMIO_START	0xa0000000
-#define MPC52xx_PCI_MMIO_SIZE	0x10000000
-#define MPC52xx_PCI_MMIO_STOP	(MPC52xx_PCI_MMIO_START+MPC52xx_PCI_MMIO_SIZE-1)
-
-#define MPC52xx_PCI_IO_BASE	0xb0000000
-
-#define MPC52xx_PCI_IO_START	0x00000000
-#define MPC52xx_PCI_IO_SIZE	0x01000000
-#define MPC52xx_PCI_IO_STOP	(MPC52xx_PCI_IO_START+MPC52xx_PCI_IO_SIZE-1)
-
-
-#define MPC52xx_PCI_TARGET_IO	MPC52xx_MBAR
-#define MPC52xx_PCI_TARGET_MEM	0x00000000
-
-
-/* ======================================================================== */
-/* Structures mapping & Defines for PCI Unit                                */
-/* ======================================================================== */
-
-#define MPC52xx_PCI_GSCR_BM		0x40000000
-#define MPC52xx_PCI_GSCR_PE		0x20000000
-#define MPC52xx_PCI_GSCR_SE		0x10000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
-#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
-#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
-#define MPC52xx_PCI_GSCR_BME		0x00004000
-#define MPC52xx_PCI_GSCR_PEE		0x00002000
-#define MPC52xx_PCI_GSCR_SEE		0x00001000
-#define MPC52xx_PCI_GSCR_PR		0x00000001
-
-
-#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
-		( ( (proc_ad) & 0xff000000 )			| \
-		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
-		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
-
-#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
-						 ((win1) << 16) | \
-						 ((win2) <<  8))
-
-#define MPC52xx_PCI_IWCR_DISABLE	0x0
-#define MPC52xx_PCI_IWCR_ENABLE		0x1
-#define MPC52xx_PCI_IWCR_READ		0x0
-#define MPC52xx_PCI_IWCR_READ_LINE	0x2
-#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
-#define MPC52xx_PCI_IWCR_MEM		0x0
-#define MPC52xx_PCI_IWCR_IO		0x8
-
-#define MPC52xx_PCI_TCR_P		0x01000000
-#define MPC52xx_PCI_TCR_LD		0x00010000
-
-#define MPC52xx_PCI_TBATR_DISABLE	0x0
-#define MPC52xx_PCI_TBATR_ENABLE	0x1
-
-
-#ifndef __ASSEMBLY__
-
-struct mpc52xx_pci {
-	u32	idr;		/* PCI + 0x00 */
-	u32	scr;		/* PCI + 0x04 */
-	u32	ccrir;		/* PCI + 0x08 */
-	u32	cr1;		/* PCI + 0x0C */
-	u32	bar0;		/* PCI + 0x10 */
-	u32	bar1;		/* PCI + 0x14 */
-	u8	reserved1[16];	/* PCI + 0x18 */
-	u32	ccpr;		/* PCI + 0x28 */
-	u32	sid;		/* PCI + 0x2C */
-	u32	erbar;		/* PCI + 0x30 */
-	u32	cpr;		/* PCI + 0x34 */
-	u8	reserved2[4];	/* PCI + 0x38 */
-	u32	cr2;		/* PCI + 0x3C */
-	u8	reserved3[32];	/* PCI + 0x40 */
-	u32	gscr;		/* PCI + 0x60 */
-	u32	tbatr0;		/* PCI + 0x64 */
-	u32	tbatr1;		/* PCI + 0x68 */
-	u32	tcr;		/* PCI + 0x6C */
-	u32	iw0btar;	/* PCI + 0x70 */
-	u32	iw1btar;	/* PCI + 0x74 */
-	u32	iw2btar;	/* PCI + 0x78 */
-	u8	reserved4[4];	/* PCI + 0x7C */
-	u32	iwcr;		/* PCI + 0x80 */
-	u32	icr;		/* PCI + 0x84 */
-	u32	isr;		/* PCI + 0x88 */
-	u32	arb;		/* PCI + 0x8C */
-	u8	reserved5[104];	/* PCI + 0x90 */
-	u32	car;		/* PCI + 0xF8 */
-	u8	reserved6[4];	/* PCI + 0xFC */
-};
-
-#endif  /* __ASSEMBLY__ */
-
-
-#endif  /* __SYSLIB_MPC52xx_PCI_H__ */
diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c
deleted file mode 100644
index f58149c03b0f..000000000000
--- a/arch/ppc/syslib/mpc52xx_pic.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Programmable Interrupt Controller functions for the Freescale MPC52xx 
- * embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mpc52xx.h>
-
-
-static struct mpc52xx_intr __iomem *intr;
-static struct mpc52xx_sdma __iomem *sdma;
-
-static void
-mpc52xx_ic_disable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << 11);
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << (10 - (irq - MPC52xx_IRQ1)));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val |= 1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val |= 1 << (irq - MPC52xx_SDMA_IRQ_BASE);
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val |= 1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_enable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << 11;
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << (10 - (irq - MPC52xx_IRQ1));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val &= ~(1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE)));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val &= ~(1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val &= ~(1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE)));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_ack(unsigned int irq)
-{
-	u32 val;
-
-	/*
-	 * Only some irqs are reset here, others in interrupting hardware.
-	 */
-
-	switch (irq) {
-	case MPC52xx_IRQ0:
-		val = in_be32(&intr->ctrl);
-		val |= 0x08000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_CCS_IRQ:
-		val = in_be32(&intr->enc_status);
-		val |= 0x00000400;
-		out_be32(&intr->enc_status, val);
-		break;
-	case MPC52xx_IRQ1:
-		val = in_be32(&intr->ctrl);
-		val |= 0x04000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ2:
-		val = in_be32(&intr->ctrl);
-		val |= 0x02000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ3:
-		val = in_be32(&intr->ctrl);
-		val |= 0x01000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	default:
-		if (irq >= MPC52xx_SDMA_IRQ_BASE
-		    && irq < (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)) {
-			out_be32(&sdma->IntPend,
-				 1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		}
-		break;
-	}
-}
-
-static void
-mpc52xx_ic_disable_and_ack(unsigned int irq)
-{
-	mpc52xx_ic_disable(irq);
-	mpc52xx_ic_ack(irq);
-}
-
-static void
-mpc52xx_ic_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		mpc52xx_ic_enable(irq);
-}
-
-static struct hw_interrupt_type mpc52xx_ic = {
-	.typename	= " MPC52xx  ",
-	.enable		= mpc52xx_ic_enable,
-	.disable	= mpc52xx_ic_disable,
-	.ack		= mpc52xx_ic_disable_and_ack,
-	.end		= mpc52xx_ic_end,
-};
-
-void __init
-mpc52xx_init_irq(void)
-{
-	int i;
-	u32 intr_ctrl;
-
-	/* Remap the necessary zones */
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-	sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
-
-	if ((intr==NULL) || (sdma==NULL))
-		panic("Can't ioremap PIC/SDMA register for init_irq !");
-
-	/* Disable all interrupt sources. */
-	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
-	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
-	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
-	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &=    0x00ff0000;	/* Keeps IRQ[0-3] config */
-	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
-			0x00001000 |	/* MEE master external enable */
-			0x00000000 |	/* 0 means disable IRQ 0-3 */
-			0x00000001;	/* CEb route critical normally */
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Zero a bunch of the priority settings.  */
-	out_be32(&intr->per_pri1, 0);
-	out_be32(&intr->per_pri2, 0);
-	out_be32(&intr->per_pri3, 0);
-	out_be32(&intr->main_pri1, 0);
-	out_be32(&intr->main_pri2, 0);
-
-	/* Initialize irq_desc[i].chip's with mpc52xx_ic. */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].chip = &mpc52xx_ic;
-		irq_desc[i].status = IRQ_LEVEL;
-	}
-
-	#define IRQn_MODE(intr_ctrl,irq) (((intr_ctrl) >> (22-(i<<1))) & 0x03)
-	for (i=0 ; i<4 ; i++) {
-		int mode;
-		mode = IRQn_MODE(intr_ctrl,i);
-		if ((mode == 0x1) || (mode == 0x2))
-			irq_desc[i?MPC52xx_IRQ1+i-1:MPC52xx_IRQ0].status = 0;
-	}
-}
-
-int
-mpc52xx_get_irq(void)
-{
-	u32 status;
-	int irq = -1;
-
-	status = in_be32(&intr->enc_status);
-
-	if (status & 0x00000400) {		/* critical */
-		irq = (status >> 8) & 0x3;
-		if (irq == 2)			/* high priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_CRIT_IRQ_BASE;
-	}
-	else if (status & 0x00200000) {		/* main */
-		irq = (status >> 16) & 0x1f;
-		if (irq == 4)			/* low priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_MAIN_IRQ_BASE;
-	}
-	else if (status & 0x20000000) {		/* peripheral */
-peripheral:
-		irq = (status >> 24) & 0x1f;
-		if (irq == 0) {			/* bestcomm */
-			status = in_be32(&sdma->IntPend);
-			irq = ffs(status) + MPC52xx_SDMA_IRQ_BASE-1;
-		}
-		else
-			irq += MPC52xx_PERP_IRQ_BASE;
-	}
-
-	return irq;
-}
-
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
deleted file mode 100644
index ab0cf4ced9e5..000000000000
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Common code for the boards based on Freescale MPC52xx embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Support for other bootloaders than UBoot by Dale Farnsworth 
- * <dfarnsworth@mvista.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/pgtable.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/mpc52xx_pci.h>
-
-extern bd_t __res;
-
-static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
-	0,  0,  0,  10, 20, 20, 25, 45,	/* from the datasheet used to compute */
-	30, 55, 40, 50, 0,  60, 35, 0,	/* CPU frequency from XLB freq and    */
-	30, 25, 65, 10, 70, 20, 75, 45,	/* external jumper config             */
-	0,  55, 40, 50, 80, 60, 35, 0
-};
-
-void
-mpc52xx_restart(char *cmd)
-{
-	struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
-
-	local_irq_disable();
-
-	/* Turn on the watchdog and wait for it to expire. It effectively
-	  does a reset */
-	out_be32(&gpt0->count, 0x000000ff);
-	out_be32(&gpt0->mode, 0x00009004);
-
-	while (1);
-}
-
-void
-mpc52xx_halt(void)
-{
-	local_irq_disable();
-
-	while (1);
-}
-
-void
-mpc52xx_power_off(void)
-{
-	/* By default we don't have any way of shut down.
-	   If a specific board wants to, it can set the power down
-	   code to any hardware implementation dependent code */
-	mpc52xx_halt();
-}
-
-
-void __init
-mpc52xx_set_bat(void)
-{
-	/* Set BAT 2 to map the 0xf0000000 area */
-	/* This mapping is used during mpc52xx_progress,
-	 * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
-	 */
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-void __init
-mpc52xx_map_io(void)
-{
-	/* Here we map the MBAR and the whole upper zone. MBAR is only
-	   64k but we can't map only 64k with BATs. Map the whole
-	   0xf0000000 range is ok and helps eventual lpb devices placed there */
-	io_block_mapping(
-		MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO);
-}
-
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-#ifndef MPC52xx_PF_CONSOLE_PORT
-#error "mpc52xx PSC for console not selected"
-#endif
-
-static void
-mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) &
-	         MPC52xx_PSC_SR_TXRDY));
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-}
-
-void
-mpc52xx_progress(char *s, unsigned short hex)
-{
-	char c;
-	struct mpc52xx_psc __iomem *psc;
-
-	psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
-
-	while ((c = *s++) != 0) {
-		if (c == '\n')
-			mpc52xx_psc_putc(psc, '\r');
-		mpc52xx_psc_putc(psc, c);
-	}
-
-	mpc52xx_psc_putc(psc, '\r');
-	mpc52xx_psc_putc(psc, '\n');
-}
-
-#endif  /* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-unsigned long __init
-mpc52xx_find_end_of_memory(void)
-{
-	u32 ramsize = __res.bi_memsize;
-
-	/*
-	 * if bootloader passed a memsize, just use it
-	 * else get size from sdram config registers
-	 */
-	if (ramsize == 0) {
-		struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
-		u32 sdram_config_0, sdram_config_1;
-
-		/* Temp BAT2 mapping active when this is called ! */
-		mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
-
-		sdram_config_0 = in_be32(&mmap_ctl->sdram0);
-		sdram_config_1 = in_be32(&mmap_ctl->sdram1);
-
-		if ((sdram_config_0 & 0x1f) >= 0x13)
-			ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
-
-		if (((sdram_config_1 & 0x1f) >= 0x13) &&
-				((sdram_config_1 & 0xfff00000) == ramsize))
-			ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
-	}
-
-	return ramsize;
-}
-
-void __init
-mpc52xx_calibrate_decr(void)
-{
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
-
-	xlbfreq = __res.bi_busfreq;
-	/* if bootloader didn't pass bus frequencies, calculate them */
-	if (xlbfreq == 0) {
-		/* Get RTC & Clock manager modules */
-		struct mpc52xx_rtc __iomem *rtc;
-		struct mpc52xx_cdm __iomem *cdm;
-
-		rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
-		cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-
-		if ((rtc==NULL) || (cdm==NULL))
-			panic("Can't ioremap RTC/CDM while computing bus freq");
-
-		/* Count bus clock during 1/64 sec */
-		out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-		previous_time = in_be32(&rtc->time);
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_start = get_tbl();
-		previous_time = current_time;
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_end = get_tbl();
-		out_be32(&rtc->dividers, 0xffff0000);	/* Restore RTC */
-
-		/* Compute all frequency from that & CDM settings */
-		xlbfreq = (tbl_end - tbl_start) << 8;
-		cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
-		ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
-					xlbfreq / 2 : xlbfreq;
-		switch (in_8(&cdm->pci_clk_sel) & 3) {
-		case 0:
-			pcifreq = ipbfreq;
-			break;
-		case 1:
-			pcifreq = ipbfreq / 2;
-			break;
-		default:
-			pcifreq = xlbfreq / 4;
-			break;
-		}
-		__res.bi_busfreq = xlbfreq;
-		__res.bi_intfreq = cpufreq;
-		__res.bi_ipbfreq = ipbfreq;
-		__res.bi_pcifreq = pcifreq;
-
-		/* Release mapping */
-		iounmap(rtc);
-		iounmap(cdm);
-	}
-
-	divisor = 4;
-
-	tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
-}
-
-
-void __init
-mpc52xx_setup_cpu(void)
-{
-	struct mpc52xx_cdm  __iomem *cdm;
-	struct mpc52xx_xlb  __iomem *xlb;
-
-	/* Map zones */
-	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
-
-	if (!cdm || !xlb) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping CDM/XLB during "
-			"mpc52xx_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Use internal 48 Mhz */
-	out_8(&cdm->ext_48mhz_en, 0x00);
-	out_8(&cdm->fd_enable, 0x01);
-	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
-		out_be16(&cdm->fd_counters, 0x0001);
-	else
-		out_be16(&cdm->fd_counters, 0x5555);
-
-	/* Configure the XLB Arbiter priorities */
-	out_be32(&xlb->master_pri_enable, 0xff);
-	out_be32(&xlb->master_priority, 0x11111111);
-
-	/* Enable ram snooping for 1GB window */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
-	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
-	/* Disable XLB pipelining */
-	/* (cfr errata 292. We could do this only just before ATA PIO
-	    transaction and re-enable it after ...) */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (cdm)  iounmap(cdm);
-	if (xlb)  iounmap(xlb);
-}
-
-
-int mpc52xx_match_psc_function(int psc_idx, const char *func)
-{
-	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
-
-	while ((cf->id != -1) && (cf->func != NULL)) {
-		if ((cf->id == psc_idx) && !strcmp(cf->func,func))
-			return 1;
-		cf++;
-	}
-
-	return 0;
-}
-
-int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
-{
-	static DEFINE_SPINLOCK(lock);
-	struct mpc52xx_cdm __iomem *cdm;
-	unsigned long flags;
-	u16 mclken_div;
-	u16 __iomem *reg;
-	u32 mask;
-
-	cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	if (!cdm) {
-		printk(KERN_ERR __FILE__ ": Error mapping CDM\n");
-		return -ENODEV;
-	}
-
-	mclken_div = 0x8000 | (clkdiv & 0x1FF);
-	switch (psc_id) {
-	case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break;
-	case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break;
-	case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break;
-	case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break;
-	default:
-		return -ENODEV;
-	}
-
-	/* Set the rate and enable the clock */
-	spin_lock_irqsave(&lock, flags);
-	out_be16(reg, mclken_div);
-	out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask);
-	spin_unlock_irqrestore(&lock, flags);
-
-	iounmap(cdm);
-	return 0;
-}
diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c
deleted file mode 100644
index b4e6f978f057..000000000000
--- a/arch/ppc/syslib/mpc52xx_sys.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Freescale MPC52xx system descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "5200",
-		.mask		= 0xffff0000,
-		.value		= 0x80110000,
-		.num_devices	= 15,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC52xx_MSCAN1, MPC52xx_MSCAN2, MPC52xx_SPI,
-			MPC52xx_USB, MPC52xx_BDLC, MPC52xx_PSC1, MPC52xx_PSC2,
-			MPC52xx_PSC3, MPC52xx_PSC4, MPC52xx_PSC5, MPC52xx_PSC6,
-			MPC52xx_FEC, MPC52xx_ATA, MPC52xx_I2C1, MPC52xx_I2C2,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask		= 0x00000000,
-		.value		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
deleted file mode 100644
index 80804eee5795..000000000000
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * MPC8xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/mii.h>
-#include <asm/cpm1.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-
-/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time.
- * They will get fixed up by mach_mpc8xx_fixup
- */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC8xx_CPM_FEC1] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name 	= "regs",
-				.start	= 0xe00,
-				.end	= 0xe88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC1,
-				.end	= MPC8xx_INT_FEC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_FEC2] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 2,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name	= "regs",
-				.start	= 0x1e00,
-				.end	= 0x1e88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC2,
-				.end	= MPC8xx_INT_FEC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa00,
-				.end	= 0xa18,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3c00,
-				.end 	= 0x3c7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC1,
-				.end	= MPC8xx_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa20,
-				.end	= 0xa38,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3d00,
-				.end 	= 0x3d7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC2,
-				.end	= MPC8xx_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa40,
-				.end	= 0xa58,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3e00,
-				.end 	= 0x3e7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC3,
-				.end	= MPC8xx_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa60,
-				.end	= 0xa78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3f00,
-				.end 	= 0x3f7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC4,
-				.end	= MPC8xx_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa80,
-				.end	= 0xa8f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x3e80,
-				.end	= 0x3ebf,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC1,
-				.end	= MPC8xx_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa90,
-				.end	= 0xa9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
- 				.name	= "pram",
- 				.start	= 0x3f80,
- 				.end	= 0x3fbf,
- 				.flags	= IORESOURCE_MEM,
-
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC2,
-				.end	= MPC8xx_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-
-        [MPC8xx_MDIO_FEC] = {
-                .name = "fsl-cpm-fec-mdio",
-                .id = 0,
-                .num_resources = 0,
-
-        },
-
-};
-
-static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc8xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc8xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
deleted file mode 100644
index 18ba1d7ff9f1..000000000000
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MPC8xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec; 
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "MPC86X",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 8,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{
-		.ppc_sys_name	= "MPC885",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 9,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_FEC2,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
deleted file mode 100644
index 2dd2dc5cd404..000000000000
--- a/arch/ppc/syslib/mv64360_pic.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * Interrupt controller support for Marvell's MV64360.
- *
- * Author: Rabeeh Khoury <rabeeh@galileo.co.il>
- * Based on MV64360 PIC written by
- * Chris Zankel <chris@mvista.com>
- * Mark A. Greer <mgreer@mvista.com>
- *
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * This file contains the specific functions to support the MV64360
- * interrupt controller.
- *
- * The MV64360 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the MV64360.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-#error "The mv64360 does not support distribution of IRQs on all CPUs"
-#endif
-/* ========================== forward declaration ========================== */
-
-static void mv64360_unmask_irq(unsigned int);
-static void mv64360_mask_irq(unsigned int);
-static irqreturn_t mv64360_cpu_error_int_handler(int, void *);
-static irqreturn_t mv64360_sram_error_int_handler(int, void *);
-static irqreturn_t mv64360_pci_error_int_handler(int, void *);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type mv64360_pic = {
-	.typename = " mv64360  ",
-	.enable   = mv64360_unmask_irq,
-	.disable  = mv64360_mask_irq,
-	.ack      = mv64360_mask_irq,
-	.end      = mv64360_unmask_irq,
-};
-
-#define CPU_INTR_STR	"mv64360 cpu interface error"
-#define SRAM_INTR_STR	"mv64360 internal sram error"
-#define PCI0_INTR_STR	"mv64360 pci 0 error"
-#define PCI1_INTR_STR	"mv64360 pci 1 error"
-
-static struct mv64x60_handle bh;
-
-u32 mv64360_irq_base = 0;	/* MV64360 handles the next 96 IRQs from here */
-
-/* mv64360_init_irq()
- *
- * This function initializes the interrupt controller. It assigns
- * all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
- *
- * Input Variable(s):
- *  None.
- *
- * Outpu. Variable(s):
- *  None.
- *
- * Returns:
- *  void
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-mv64360_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
-
-	/* All interrupts are level interrupts */
-	for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
-		irq_desc[i].status |= IRQ_LEVEL;
-		irq_desc[i].chip = &mv64360_pic;
-	}
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: exit", 0x0);
-}
-
-/* mv64360_get_irq()
- *
- * This function returns the lowest interrupt number of all interrupts that
- * are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- *
- */
-int
-mv64360_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-#ifdef CONFIG_SMP
-	/*
-	 * Second CPU gets only doorbell (message) interrupts.
-	 * The doorbell interrupt is BIT28 in the main interrupt low cause reg.
-	 */
-	int cpu_nr = smp_processor_id();
-	if (cpu_nr == 1) {
-		if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
-		      (1 << MV64x60_IRQ_DOORBELL)))
-			return -1;
-		return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
-	}
-#endif
-
-	irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			}
-			else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (mv64360_irq_base + irq);
-}
-
-/* mv64360_unmask_irq()
- *
- * This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_unmask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	/* second CPU gets only doorbell interrupts */
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* mv64360_mask_irq()
- *
- * This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_mask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-mv64360_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_sram_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
-		"Error in internal SRAM - Cause register",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
-	printk(KERN_ERR "\tSRAM error register dump:\n");
-	printk(KERN_ERR "\tAddress Low  0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress High 0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData Low     0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
-	printk(KERN_ERR "\tData High    0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
- * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
- * well.  IOW, don't set bit 0.
- */
-#define MV64360_PCI0_ERR_MASK_VAL	0x00a50c24
-
-static int __init
-mv64360_register_hdlrs(void)
-{
-	int	rc;
-
-	/* Clear old errors and register CPU interface error intr handler */
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
-		mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
-
-	/* Clear old errors and register internal SRAM error intr handler */
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
-		mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
-
-	/* Clear old errors and register PCI 0 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL);
-
-	/* Clear old errors and register PCI 1 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL);
-
-	return 0;
-}
-
-arch_initcall(mv64360_register_hdlrs);
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
deleted file mode 100644
index 418f3053de52..000000000000
--- a/arch/ppc/syslib/mv64x60.c
+++ /dev/null
@@ -1,2485 +0,0 @@
-/*
- * Common routines for the Marvell/Galileo Discovery line of host bridges
- * (gt64260, mv64360, mv64460, ...).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-u8 mv64x60_pci_exclude_bridge = 1;
-DEFINE_SPINLOCK(mv64x60_lock);
-
-static phys_addr_t 	mv64x60_bridge_pbase;
-static void 		__iomem *mv64x60_bridge_vbase;
-static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
-static u32		mv64x60_bridge_rev;
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct pci_controller	sysfs_hose_a;
-#endif
-
-static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-static u32 mv64360_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 mv64360_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-static void mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base);
-static void mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-
-/*
- * Define tables that have the chip-specific info for each type of
- * Marvell bridge chip.
- */
-static struct mv64x60_chip_info gt64260a_ci __initdata = { /* GT64260A */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260a_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info gt64260b_ci __initdata = { /* GT64260B */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260b_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64360_ci __initdata = { /* MV64360 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64360_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64460_ci __initdata = { /* MV64460 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64460_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-/*
- *****************************************************************************
- *
- *	Platform Device Definitions
- *
- *****************************************************************************
- */
-#ifdef CONFIG_SERIAL_MPSC
-static struct mpsc_shared_pdata mv64x60_mpsc_shared_pdata = {
-	.mrr_val		= 0x3ffffe38,
-	.rcrr_val		= 0,
-	.tcrr_val		= 0,
-	.intr_cause_val		= 0,
-	.intr_mask_val		= 0,
-};
-
-static struct resource mv64x60_mpsc_shared_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc routing base",
-		.start	= MV64x60_MPSC_ROUTING_OFFSET,
-		.end	= MV64x60_MPSC_ROUTING_OFFSET +
-			MPSC_ROUTING_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma intr base",
-		.start	= MV64x60_SDMA_INTR_OFFSET,
-		.end	= MV64x60_SDMA_INTR_OFFSET +
-			MPSC_SDMA_INTR_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mpsc_shared_device = { /* Shared device */
-	.name		= MPSC_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc_shared_resources),
-	.resource	= mv64x60_mpsc_shared_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc_shared_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc0_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc0_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 0 base",
-		.start	= MV64x60_MPSC_0_OFFSET,
-		.end	= MV64x60_MPSC_0_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 0 base",
-		.start	= MV64x60_SDMA_0_OFFSET,
-		.end	= MV64x60_SDMA_0_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 0 base",
-		.start	= MV64x60_BRG_0_OFFSET,
-		.end	= MV64x60_BRG_0_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 0 irq",
-		.start	= MV64x60_IRQ_SDMA_0,
-		.end	= MV64x60_IRQ_SDMA_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc0_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc0_resources),
-	.resource	= mv64x60_mpsc0_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc0_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc1_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc1_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 1 base",
-		.start	= MV64x60_MPSC_1_OFFSET,
-		.end	= MV64x60_MPSC_1_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 1 base",
-		.start	= MV64x60_SDMA_1_OFFSET,
-		.end	= MV64x60_SDMA_1_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 1 base",
-		.start	= MV64x60_BRG_1_OFFSET,
-		.end	= MV64x60_BRG_1_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 1 irq",
-		.start	= MV64360_IRQ_SDMA_1,
-		.end	= MV64360_IRQ_SDMA_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc1_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc1_resources),
-	.resource	= mv64x60_mpsc1_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc1_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv64x60_eth_shared_resources[] = {
-	[0] = {
-		.name	= "ethernet shared base",
-		.start	= MV643XX_ETH_SHARED_REGS,
-		.end	= MV643XX_ETH_SHARED_REGS +
-					MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv64x60_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth_shared_resources),
-	.resource	= mv64x60_eth_shared_resources,
-};
-
-#ifdef CONFIG_MV643XX_ETH_0
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 0,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_1
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 1,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_2
-static struct resource mv64x60_eth2_resources[] = {
-	[0] = {
-		.name	= "eth2 irq",
-		.start	= MV64x60_IRQ_ETH_2,
-		.end	= MV64x60_IRQ_ETH_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 2,
-};
-
-static struct platform_device eth2_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
-	.resource	= mv64x60_eth2_resources,
-	.dev = {
-		.platform_data = &eth2_pd,
-	},
-};
-#endif
-#endif
-
-#ifdef	CONFIG_I2C_MV64XXX
-static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = {
-	.freq_m			= 8,
-	.freq_n			= 3,
-	.timeout		= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource mv64xxx_i2c_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mv64xxx i2c base",
-		.start	= MV64XXX_I2C_OFFSET,
-		.end	= MV64XXX_I2C_OFFSET + MV64XXX_I2C_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "mv64xxx i2c irq",
-		.start	= MV64x60_IRQ_I2C,
-		.end	= MV64x60_IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_device = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64xxx_i2c_resources),
-	.resource	= mv64xxx_i2c_resources,
-	.dev = {
-		.platform_data = &mv64xxx_i2c_pdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_WATCHDOG
-static struct mv64x60_wdt_pdata mv64x60_wdt_pdata = {
-	.timeout		= 10,  /* default watchdog expiry in seconds */
-	.bus_clk		= 133, /* default bus clock in MHz */
-};
-
-static struct resource mv64x60_wdt_resources[] = {
-	[0] = {
-		.name	= "mv64x60 wdt base",
-		.start	= MV64x60_WDT_WDC,
-		.end	= MV64x60_WDT_WDC + 8 - 1, /* two 32-bit registers */
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wdt_device = {
-	.name		= MV64x60_WDT_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_wdt_resources),
-	.resource	= mv64x60_wdt_resources,
-	.dev = {
-		.platform_data = &mv64x60_wdt_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct mv64xxx_pdata mv64xxx_pdata = {
-	.hs_reg_valid	= 0,
-};
-
-static struct platform_device mv64xxx_device = { /* general mv64x60 stuff */
-	.name	= MV64XXX_DEV_NAME,
-	.id	= 0,
-	.dev = {
-		.platform_data = &mv64xxx_pdata,
-	},
-};
-#endif
-
-static struct platform_device *mv64x60_pd_devs[] __initdata = {
-#ifdef CONFIG_SERIAL_MPSC
-	&mpsc_shared_device,
-	&mpsc0_device,
-	&mpsc1_device,
-#endif
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-	&mv64x60_eth_shared_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_0
-	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	&eth2_device,
-#endif
-#ifdef	CONFIG_I2C_MV64XXX
-	&i2c_device,
-#endif
-#ifdef	CONFIG_MV64X60_WDT
-	&wdt_device,
-#endif
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	&mv64xxx_device,
-#endif
-};
-
-/*
- *****************************************************************************
- *
- *	Bridge Initialization Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_init()
- *
- * Initialize the bridge based on setting passed in via 'si'.  The bridge
- * handle, 'bh', will be set so that it can be used to make subsequent
- * calls to routines in this file.
- */
-int __init
-mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64x60 initialization", 0x0);
-
-	spin_lock_init(&mv64x60_lock);
-	mv64x60_early_init(bh, si);
-
-	if (mv64x60_get_type(bh) || mv64x60_setup_for_chip(bh)) {
-		iounmap(bh->v_base);
-		bh->v_base = 0;
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60_init: Can't determine chip",0);
-		return -1;
-	}
-
-	bh->ci->disable_all_windows(bh, si);
-	mv64x60_get_mem_windows(bh, mem_windows);
-	mv64x60_config_cpu2mem_windows(bh, si, mem_windows);
-
-	if (bh->ci->config_io2mem_windows)
-		bh->ci->config_io2mem_windows(bh, si, mem_windows);
-	if (bh->ci->set_mpsc2regs_window)
-		bh->ci->set_mpsc2regs_window(bh, si->phys_reg_base);
-
-	if (si->pci_1.enable_bus) {
-		bh->io_base_b = (u32)ioremap(si->pci_1.pci_io.cpu_base,
-			si->pci_1.pci_io.size);
-		isa_io_base = bh->io_base_b;
-	}
-
-	if (si->pci_0.enable_bus) {
-		bh->io_base_a = (u32)ioremap(si->pci_0.pci_io.cpu_base,
-			si->pci_0.pci_io.size);
-		isa_io_base = bh->io_base_a;
-
-		mv64x60_alloc_hose(bh, MV64x60_PCI0_CONFIG_ADDR,
-			MV64x60_PCI0_CONFIG_DATA, &bh->hose_a);
-		mv64x60_config_resources(bh->hose_a, &si->pci_0, bh->io_base_a);
-		mv64x60_config_pci_params(bh->hose_a, &si->pci_0);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_0, 0);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_a, &si->pci_0, 0,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_a, 0,
-			si->phys_reg_base);
-	}
-
-	if (si->pci_1.enable_bus) {
-		mv64x60_alloc_hose(bh, MV64x60_PCI1_CONFIG_ADDR,
-			MV64x60_PCI1_CONFIG_DATA, &bh->hose_b);
-		mv64x60_config_resources(bh->hose_b, &si->pci_1, bh->io_base_b);
-		mv64x60_config_pci_params(bh->hose_b, &si->pci_1);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_1, 1);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_b, &si->pci_1, 1,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_b, 1,
-			si->phys_reg_base);
-	}
-
-	bh->ci->chip_specific_init(bh, si);
-	mv64x60_pd_fixup(bh, mv64x60_pd_devs, ARRAY_SIZE(mv64x60_pd_devs));
-
-	return 0;
-}
-
-/*
- * mv64x60_early_init()
- *
- * Do some bridge work that must take place before we start messing with
- * the bridge for real.
- */
-void __init
-mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	struct pci_controller	hose_a, hose_b;
-
-	memset(bh, 0, sizeof(*bh));
-
-	bh->p_base = si->phys_reg_base;
-	bh->v_base = ioremap(bh->p_base, MV64x60_INTERNAL_SPACE_SIZE);
-
-	mv64x60_bridge_pbase = bh->p_base;
-	mv64x60_bridge_vbase = bh->v_base;
-
-	/* Assuming pci mode [reserved] bits 4:5 on 64260 are 0 */
-	bh->pci_mode_a = mv64x60_read(bh, MV64x60_PCI0_MODE) &
-		MV64x60_PCIMODE_MASK;
-	bh->pci_mode_b = mv64x60_read(bh, MV64x60_PCI1_MODE) &
-		MV64x60_PCIMODE_MASK;
-
-	/* Need temporary hose structs to call mv64x60_set_bus() */
-	memset(&hose_a, 0, sizeof(hose_a));
-	memset(&hose_b, 0, sizeof(hose_b));
-	setup_indirect_pci_nomap(&hose_a, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-	setup_indirect_pci_nomap(&hose_b, bh->v_base + MV64x60_PCI1_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI1_CONFIG_DATA);
-	bh->hose_a = &hose_a;
-	bh->hose_b = &hose_b;
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	/* Save a copy of hose_a for sysfs functions -- hack */
-	memcpy(&sysfs_hose_a, &hose_a, sizeof(hose_a));
-#endif
-
-	mv64x60_set_bus(bh, 0, 0);
-	mv64x60_set_bus(bh, 1, 0);
-
-	bh->hose_a = NULL;
-	bh->hose_b = NULL;
-
-	/* Clear bit 0 of PCI addr decode control so PCI->CPU remap 1:1 */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_PCI_DECODE_CNTL, 0x00000001);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_PCI_DECODE_CNTL, 0x00000001);
-
-	/* Bit 12 MUST be 0; set bit 27--don't auto-update cpu remap regs */
-	mv64x60_clr_bits(bh, MV64x60_CPU_CONFIG, (1<<12));
-	mv64x60_set_bits(bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff);
-}
-
-/*
- *****************************************************************************
- *
- *	Window Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_32bit_window()
- *
- * Determine the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base, u32 *size)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_32bit[window].get_from_field;
-
-		val = mv64x60_read(bh, base_reg);
-		*base = get_from_field(val, base_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base, val, size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n",
-		window, *base, *size);
-}
-
-/*
- * mv64x60_set_32bit_window()
- *
- * Set the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base, u32 size, u32 other_bits)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 32bit window: %d, base: 0x%x, size: 0x%x, other: 0x%x\n",
-		window, base, size, other_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_32bit[window].map_to_field;
-
-		val = map_to_field(base, base_bits) | other_bits;
-		mv64x60_write(bh, base_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_get_64bit_window()
- *
- * Determine the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base_hi, u32 *base_lo, u32 *size)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_64bit[window].get_from_field;
-
-		*base_hi = mv64x60_read(bh,
-			bh->ci->window_tab_64bit[window].base_hi_reg);
-
-		val = mv64x60_read(bh, base_lo_reg);
-		*base_lo = get_from_field(val, base_lo_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base_lo, val,
-								size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base_hi = 0;
-		*base_lo = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x\n", window, *base_hi, *base_lo, *size);
-}
-
-/*
- * mv64x60_set_64bit_window()
- *
- * Set the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base_hi, u32 base_lo, u32 size, u32 other_bits)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x, other: 0x%x\n",
-		window, base_hi, base_lo, size, other_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_64bit[window].map_to_field;
-
-		mv64x60_write(bh, bh->ci->window_tab_64bit[window].base_hi_reg,
-			base_hi);
-
-		val = map_to_field(base_lo, base_lo_bits) | other_bits;
-		mv64x60_write(bh, base_lo_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base_lo, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_mask()
- *
- * Take the high-order 'num_bits' of 'val' & mask off low bits.
- */
-u32 __init
-mv64x60_mask(u32 val, u32 num_bits)
-{
-	return val & (0xffffffff << (32 - num_bits));
-}
-
-/*
- * mv64x60_shift_left()
- *
- * Take the low-order 'num_bits' of 'val', shift left to align at bit 31 (MSB).
- */
-u32 __init
-mv64x60_shift_left(u32 val, u32 num_bits)
-{
-	return val << (32 - num_bits);
-}
-
-/*
- * mv64x60_shift_right()
- *
- * Take the high-order 'num_bits' of 'val', shift right to align at bit 0 (LSB).
- */
-u32 __init
-mv64x60_shift_right(u32 val, u32 num_bits)
-{
-	return val >> (32 - num_bits);
-}
-
-/*
- *****************************************************************************
- *
- *	Chip Identification Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_type()
- *
- * Determine the type of bridge chip we have.
- */
-int __init
-mv64x60_get_type(struct mv64x60_handle *bh)
-{
-	struct pci_controller hose;
-	u16	val;
-	u8	save_exclude;
-
-	memset(&hose, 0, sizeof(hose));
-	setup_indirect_pci_nomap(&hose, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	/* Sanity check of bridge's Vendor ID */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		mv64x60_pci_exclude_bridge = save_exclude;
-		return -1;
-	}
-
-	/* Get the revision of the chip */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_CLASS_REVISION,
-		&val);
-	bh->rev = (u32)(val & 0xff);
-
-	/* Figure out the type of Marvell bridge it is */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &val);
-	mv64x60_pci_exclude_bridge = save_exclude;
-
-	switch (val) {
-	case PCI_DEVICE_ID_MARVELL_GT64260:
-		switch (bh->rev) {
-		case GT64260_REV_A:
-			bh->type = MV64x60_TYPE_GT64260A;
-			break;
-
-		default:
-			printk(KERN_WARNING "Unsupported GT64260 rev %04x\n",
-				bh->rev);
-			/* Assume its similar to a 'B' rev and fallthru */
-		case GT64260_REV_B:
-			bh->type = MV64x60_TYPE_GT64260B;
-			break;
-		}
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64360:
-		/* Marvell won't tell me how to distinguish a 64361 & 64362 */
-		bh->type = MV64x60_TYPE_MV64360;
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64460:
-		bh->type = MV64x60_TYPE_MV64460;
-		break;
-
-	default:
-		printk(KERN_ERR "Unknown Marvell bridge type %04x\n", val);
-		return -1;
-	}
-
-	/* Hang onto bridge type & rev for PIC code */
-	mv64x60_bridge_type = bh->type;
-	mv64x60_bridge_rev = bh->rev;
-
-	return 0;
-}
-
-/*
- * mv64x60_setup_for_chip()
- *
- * Set 'bh' to use the proper set of routine for the bridge chip that we have.
- */
-int __init
-mv64x60_setup_for_chip(struct mv64x60_handle *bh)
-{
-	int	rc = 0;
-
-	/* Set up chip-specific info based on the chip/bridge type */
-	switch(bh->type) {
-	case MV64x60_TYPE_GT64260A:
-		bh->ci = &gt64260a_ci;
-		break;
-
-	case MV64x60_TYPE_GT64260B:
-		bh->ci = &gt64260b_ci;
-		break;
-
-	case MV64x60_TYPE_MV64360:
-		bh->ci = &mv64360_ci;
-		break;
-
-	case MV64x60_TYPE_MV64460:
-		bh->ci = &mv64460_ci;
-		break;
-
-	case MV64x60_TYPE_INVALID:
-	default:
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60: Unsupported bridge", 0x0);
-		printk(KERN_ERR "mv64x60: Unsupported bridge\n");
-		rc = -1;
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_bridge_vbase()
- *
- * Return the virtual address of the bridge's registers.
- */
-void __iomem *
-mv64x60_get_bridge_vbase(void)
-{
-	return mv64x60_bridge_vbase;
-}
-
-/*
- * mv64x60_get_bridge_type()
- *
- * Return the type of bridge on the platform.
- */
-u32
-mv64x60_get_bridge_type(void)
-{
-	return mv64x60_bridge_type;
-}
-
-/*
- * mv64x60_get_bridge_rev()
- *
- * Return the revision of the bridge on the platform.
- */
-u32
-mv64x60_get_bridge_rev(void)
-{
-	return mv64x60_bridge_rev;
-}
-
-/*
- *****************************************************************************
- *
- *	System Memory Window Related Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_mem_size()
- *
- * Calculate the amount of memory that the memory controller is set up for.
- * This should only be used by board-specific code if there is no other
- * way to determine the amount of memory in the system.
- */
-u32 __init
-mv64x60_get_mem_size(u32 bridge_base, u32 chip_type)
-{
-	struct mv64x60_handle	bh;
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-	u32	rc = 0;
-
-	memset(&bh, 0, sizeof(bh));
-
-	bh.type = chip_type;
-	bh.v_base = (void *)bridge_base;
-
-	if (!mv64x60_setup_for_chip(&bh)) {
-		mv64x60_get_mem_windows(&bh, mem_windows);
-		rc = mv64x60_calc_mem_size(&bh, mem_windows);
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_mem_windows()
- *
- * Get the values in the memory controller & return in the 'mem_windows' array.
- */
-void __init
-mv64x60_get_mem_windows(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win))
-			mv64x60_get_32bit_window(bh, win,
-				&mem_windows[i][0], &mem_windows[i][1]);
-		else {
-			mem_windows[i][0] = 0;
-			mem_windows[i][1] = 0;
-		}
-}
-
-/*
- * mv64x60_calc_mem_size()
- *
- * Using the memory controller register values in 'mem_windows', determine
- * how much memory it is set up for.
- */
-u32 __init
-mv64x60_calc_mem_size(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, total = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		total += mem_windows[i][1];
-
-	return total;
-}
-
-/*
- *****************************************************************************
- *
- *	CPU->System MEM, PCI Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_cpu2mem_windows()
- *
- * Configure CPU->Memory windows on the bridge.
- */
-static u32 prot_tab[] __initdata = {
-	MV64x60_CPU_PROT_0_WIN, MV64x60_CPU_PROT_1_WIN,
-	MV64x60_CPU_PROT_2_WIN, MV64x60_CPU_PROT_3_WIN
-};
-
-static u32 cpu_snoop_tab[] __initdata = {
-	MV64x60_CPU_SNOOP_0_WIN, MV64x60_CPU_SNOOP_1_WIN,
-	MV64x60_CPU_SNOOP_2_WIN, MV64x60_CPU_SNOOP_3_WIN
-};
-
-void __init
-mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/* Set CPU protection & snoop windows */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, prot_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				si->cpu_prot_options[i]);
-			bh->ci->enable_window_32bit(bh, prot_tab[i]);
-
-			if (bh->ci->window_tab_32bit[cpu_snoop_tab[i]].
-								base_reg != 0) {
-				mv64x60_set_32bit_window(bh, cpu_snoop_tab[i],
-					mem_windows[i][0], mem_windows[i][1],
-					si->cpu_snoop_options[i]);
-				bh->ci->enable_window_32bit(bh,
-					cpu_snoop_tab[i]);
-			}
-
-		}
-}
-
-/*
- * mv64x60_config_cpu2pci_windows()
- *
- * Configure the CPU->PCI windows for one of the PCI buses.
- */
-static u32 win_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_WIN, MV64x60_CPU2PCI0_MEM_0_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_WIN, MV64x60_CPU2PCI0_MEM_2_WIN },
-	{ MV64x60_CPU2PCI1_IO_WIN, MV64x60_CPU2PCI1_MEM_0_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_WIN, MV64x60_CPU2PCI1_MEM_2_WIN },
-};
-
-static u32 remap_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_REMAP_WIN, MV64x60_CPU2PCI0_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_REMAP_WIN, MV64x60_CPU2PCI0_MEM_2_REMAP_WIN },
-	{ MV64x60_CPU2PCI1_IO_REMAP_WIN, MV64x60_CPU2PCI1_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_REMAP_WIN, MV64x60_CPU2PCI1_MEM_2_REMAP_WIN }
-};
-
-void __init
-mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
-	struct mv64x60_pci_info *pi, u32 bus)
-{
-	int	i;
-
-	if (pi->pci_io.size > 0) {
-		mv64x60_set_32bit_window(bh, win_tab[bus][0],
-			pi->pci_io.cpu_base, pi->pci_io.size, pi->pci_io.swap);
-		mv64x60_set_32bit_window(bh, remap_tab[bus][0],
-			pi->pci_io.pci_base_lo, 0, 0);
-		bh->ci->enable_window_32bit(bh, win_tab[bus][0]);
-	} else /* Actually, the window should already be disabled */
-		bh->ci->disable_window_32bit(bh, win_tab[bus][0]);
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size > 0) {
-			mv64x60_set_32bit_window(bh, win_tab[bus][i+1],
-				pi->pci_mem[i].cpu_base, pi->pci_mem[i].size,
-				pi->pci_mem[i].swap);
-			mv64x60_set_64bit_window(bh, remap_tab[bus][i+1],
-				pi->pci_mem[i].pci_base_hi,
-				pi->pci_mem[i].pci_base_lo, 0, 0);
-			bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]);
-		} else /* Actually, the window should already be disabled */
-			bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]);
-}
-
-/*
- *****************************************************************************
- *
- *	PCI->System MEM Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_pci2mem_windows()
- *
- * Configure the PCI->Memory windows on the bridge.
- */
-static u32 pci_acc_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_ACC_CNTL_0_WIN, MV64x60_PCI02MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI02MEM_ACC_CNTL_2_WIN, MV64x60_PCI02MEM_ACC_CNTL_3_WIN },
-	{ MV64x60_PCI12MEM_ACC_CNTL_0_WIN, MV64x60_PCI12MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI12MEM_ACC_CNTL_2_WIN, MV64x60_PCI12MEM_ACC_CNTL_3_WIN }
-};
-
-static u32 pci_snoop_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_SNOOP_0_WIN, MV64x60_PCI02MEM_SNOOP_1_WIN,
-	  MV64x60_PCI02MEM_SNOOP_2_WIN, MV64x60_PCI02MEM_SNOOP_3_WIN },
-	{ MV64x60_PCI12MEM_SNOOP_0_WIN, MV64x60_PCI12MEM_SNOOP_1_WIN,
-	  MV64x60_PCI12MEM_SNOOP_2_WIN, MV64x60_PCI12MEM_SNOOP_3_WIN }
-};
-
-static u32 pci_size_tab[2][4] __initdata = {
-	{ MV64x60_PCI0_MEM_0_SIZE, MV64x60_PCI0_MEM_1_SIZE,
-	  MV64x60_PCI0_MEM_2_SIZE, MV64x60_PCI0_MEM_3_SIZE },
-	{ MV64x60_PCI1_MEM_0_SIZE, MV64x60_PCI1_MEM_1_SIZE,
-	  MV64x60_PCI1_MEM_2_SIZE, MV64x60_PCI1_MEM_3_SIZE }
-};
-
-void __init
-mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
-	struct pci_controller *hose, struct mv64x60_pci_info *pi,
-	u32 bus, u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/*
-	 * Set the access control, snoop, BAR size, and window base addresses.
-	 * PCI->MEM windows base addresses will match exactly what the
-	 * CPU->MEM windows are.
-	 */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_64bit_window(bh,
-				pci_acc_tab[bus][i], 0,
-				mem_windows[i][0], mem_windows[i][1],
-				pi->acc_cntl_options[i]);
-			bh->ci->enable_window_64bit(bh, pci_acc_tab[bus][i]);
-
-			if (bh->ci->window_tab_64bit[
-				pci_snoop_tab[bus][i]].base_lo_reg != 0) {
-
-				mv64x60_set_64bit_window(bh,
-					pci_snoop_tab[bus][i], 0,
-					mem_windows[i][0], mem_windows[i][1],
-					pi->snoop_options[i]);
-				bh->ci->enable_window_64bit(bh,
-					pci_snoop_tab[bus][i]);
-			}
-
-			bh->ci->set_pci2mem_window(hose, bus, i,
-				mem_windows[i][0]);
-			mv64x60_write(bh, pci_size_tab[bus][i],
-				mv64x60_mask(mem_windows[i][1] - 1, 20));
-
-			/* Enable the window */
-			mv64x60_clr_bits(bh, ((bus == 0) ?
-				MV64x60_PCI0_BAR_ENABLE :
-				MV64x60_PCI1_BAR_ENABLE), (1 << i));
-		}
-}
-
-/*
- *****************************************************************************
- *
- *	Hose & Resource Alloc/Init Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_alloc_hoses()
- *
- * Allocate the PCI hose structures for the bridge's PCI buses.
- */
-void __init
-mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data,
-	struct pci_controller **hose)
-{
-	*hose = pcibios_alloc_controller();
-	setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr,
-		bh->v_base + cfg_data);
-}
-
-/*
- * mv64x60_config_resources()
- *
- * Calculate the offsets, etc. for the hose structures to reflect all of
- * the address remapping that happens as you go from CPU->PCI and PCI->MEM.
- */
-void __init
-mv64x60_config_resources(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi, u32 io_base)
-{
-	int		i;
-	/* 2 hoses; 4 resources/hose; string <= 64 bytes */
-	static char	s[2][4][64];
-
-	if (pi->pci_io.size != 0) {
-		sprintf(s[hose->index][0], "PCI hose %d I/O Space",
-			hose->index);
-		pci_init_resource(&hose->io_resource, io_base - isa_io_base,
-			io_base - isa_io_base + pi->pci_io.size - 1,
-			IORESOURCE_IO, s[hose->index][0]);
-		hose->io_space.start = pi->pci_io.pci_base_lo;
-		hose->io_space.end = pi->pci_io.pci_base_lo + pi->pci_io.size-1;
-		hose->io_base_phys = pi->pci_io.cpu_base;
-		hose->io_base_virt = (void *)isa_io_base;
-	}
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size != 0) {
-			sprintf(s[hose->index][i+1], "PCI hose %d MEM Space %d",
-				hose->index, i);
-			pci_init_resource(&hose->mem_resources[i],
-				pi->pci_mem[i].cpu_base,
-				pi->pci_mem[i].cpu_base + pi->pci_mem[i].size-1,
-				IORESOURCE_MEM, s[hose->index][i+1]);
-		}
-
-	hose->mem_space.end = pi->pci_mem[0].pci_base_lo +
-						pi->pci_mem[0].size - 1;
-	hose->pci_mem_offset = pi->pci_mem[0].cpu_base -
-						pi->pci_mem[0].pci_base_lo;
-}
-
-/*
- * mv64x60_config_pci_params()
- *
- * Configure a hose's PCI config space parameters.
- */
-void __init
-mv64x60_config_pci_params(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi)
-{
-	u32	devfn;
-	u16	u16_val;
-	u8	save_exclude;
-
-	devfn = PCI_DEVFN(0,0);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	/* Set class code to indicate host bridge */
-	u16_val = PCI_CLASS_BRIDGE_HOST; /* 0x0600 (host bridge) */
-	early_write_config_word(hose, 0, devfn, PCI_CLASS_DEVICE, u16_val);
-
-	/* Enable bridge to be PCI master & respond to PCI MEM cycles */
-	early_read_config_word(hose, 0, devfn, PCI_COMMAND, &u16_val);
-	u16_val &= ~(PCI_COMMAND_IO | PCI_COMMAND_INVALIDATE |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
-	u16_val |= pi->pci_cmd_bits | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
-
-	/* Set latency timer, cache line size, clear BIST */
-	u16_val = (pi->latency_timer << 8) | (L1_CACHE_BYTES >> 2);
-	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- *****************************************************************************
- *
- *	PCI Related Routine
- *
- *****************************************************************************
- */
-/*
- * mv64x60_set_bus()
- *
- * Set the bus number for the hose directly under the bridge.
- */
-void __init
-mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus)
-{
-	struct pci_controller	*hose;
-	u32	pci_mode, p2p_cfg, pci_cfg_offset, val;
-	u8	save_exclude;
-
-	if (bus == 0) {
-		pci_mode = bh->pci_mode_a;
-		p2p_cfg = MV64x60_PCI0_P2P_CONFIG;
-		pci_cfg_offset = 0x64;
-		hose = bh->hose_a;
-	} else {
-		pci_mode = bh->pci_mode_b;
-		p2p_cfg = MV64x60_PCI1_P2P_CONFIG;
-		pci_cfg_offset = 0xe4;
-		hose = bh->hose_b;
-	}
-
-	child_bus &= 0xff;
-	val = mv64x60_read(bh, p2p_cfg);
-
-	if (pci_mode == MV64x60_PCIMODE_CONVENTIONAL) {
-		val &= 0xe0000000; /* Force dev num to 0, turn off P2P bridge */
-		val |= (child_bus << 16) | 0xff;
-		mv64x60_write(bh, p2p_cfg, val);
-		(void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */
-	} else { /* PCI-X */
-		/*
-		 * Need to use the current bus/dev number (that's in the
-		 * P2P CONFIG reg) to access the bridge's pci config space.
-		 */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(hose, (val & 0x00ff0000) >> 16,
-			PCI_DEVFN(((val & 0x1f000000) >> 24), 0),
-			pci_cfg_offset, child_bus << 8);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	}
-}
-
-/*
- * mv64x60_pci_exclude_device()
- *
- * This routine is used to make the bridge not appear when the
- * PCI subsystem is accessing PCI devices (in PCI config space).
- */
-int
-mv64x60_pci_exclude_device(u8 bus, u8 devfn)
-{
-	struct pci_controller	*hose;
-
-	hose = pci_bus_to_hose(bus);
-
-	/* Skip slot 0 on both hoses */
-	if ((mv64x60_pci_exclude_bridge == 1) && (PCI_SLOT(devfn) == 0) &&
-		(hose->first_busno == bus))
-
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-} /* mv64x60_pci_exclude_device() */
-
-/*
- *****************************************************************************
- *
- *	Platform Device Routines
- *
- *****************************************************************************
- */
-
-/*
- * mv64x60_pd_fixup()
- *
- * Need to add the base addr of where the bridge's regs are mapped in the
- * physical addr space so drivers can ioremap() them.
- */
-void __init
-mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[],
-	u32 entries)
-{
-	struct resource	*r;
-	u32		i, j;
-
-	for (i=0; i<entries; i++) {
-		j = 0;
-
-		while ((r = platform_get_resource(pd_devs[i],IORESOURCE_MEM,j))
-			!= NULL) {
-
-			r->start += bh->p_base;
-			r->end += bh->p_base;
-			j++;
-		}
-	}
-}
-
-/*
- * mv64x60_add_pds()
- *
- * Add the mv64x60 platform devices to the list of platform devices.
- */
-static int __init
-mv64x60_add_pds(void)
-{
-	return platform_add_devices(mv64x60_pd_devs,
-		ARRAY_SIZE(mv64x60_pd_devs));
-}
-arch_initcall(mv64x60_add_pds);
-
-/*
- *****************************************************************************
- *
- *	GT64260-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * gt64260_translate_size()
- *
- * On the GT64260, the size register is really the "top" address of the window.
- */
-static u32 __init
-gt64260_translate_size(u32 base, u32 size, u32 num_bits)
-{
-	return base + mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * gt64260_untranslate_size()
- *
- * Translate the top address of a window into a window size.
- */
-static u32 __init
-gt64260_untranslate_size(u32 base, u32 size, u32 num_bits)
-{
-	if (size >= base)
-		size = size - base + (1 << (32 - num_bits));
-	else
-		size = 0;
-
-	return size;
-}
-
-/*
- * gt64260_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-static u32 gt64260_reg_addrs[2][4] __initdata = {
-	{ 0x10, 0x14, 0x18, 0x1c }, { 0x90, 0x94, 0x98, 0x9c }
-};
-
-static void __init
-gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
-		gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 gt64260_offset[2] __initdata = {0x20, 0xa0};
-
-static void __init
-gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus],
-		(base << 16));
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_is_enabled_32bit()
- *
- * On a GT64260, a window is enabled iff its top address is >= to its base
- * address.
- */
-static u32 __init
-gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	rc = 0;
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0) &&
-		((mv64x60_read(bh, gt64260_32bit_windows[window].size_reg) &
-			((1 << gt64260_32bit_windows[window].size_bits) - 1)) >=
-		 (mv64x60_read(bh, gt64260_32bit_windows[window].base_reg) &
-			((1 << gt64260_32bit_windows[window].base_bits) - 1))))
-
-		rc = 1;
-
-	return rc;
-}
-
-/*
- * gt64260_enable_window_32bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 32bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_32bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_32bit_windows[window].base_reg,
-		gt64260_32bit_windows[window].size_reg);
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff);
-		mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_enable_window_64bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_64bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_64bit_windows[window].base_lo_reg,
-		gt64260_64bit_windows[window].size_reg);
-
-	if ((gt64260_64bit_windows[window].base_lo_reg != 0) &&
-		(gt64260_64bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_lo_reg,
-									0xfff);
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0);
-		mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_disable_all_windows()
- *
- * The GT64260 has several windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	i, preserve;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			gt64260_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			gt64260_disable_window_64bit(bh, i);
-
-	/* Turn off cpu protection windows not in gt64260_32bit_windows[] */
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_4, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_4, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_5, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_5, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_6, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_6, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_7, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_7, 0);
-
-	/* Turn off PCI->MEM access cntl wins not in gt64260_64bit_windows[] */
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_SIZE, 0);
-
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_SIZE, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x07fffdff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x07fffdff);
-
-	/*
-	 * Some firmwares enable a bunch of intr sources
-	 * for the PCI INT output pins.
-	 */
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_0_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0);
-}
-
-/*
- * gt64260a_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260A.
- */
-static void __init
-gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.mirror_regs = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.mirror_regs = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- * gt64260b_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260B.
- */
-static void __init
-gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH, 0xf);
-
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	/*
-	 * The 64260B is not supposed to have the bug where the MPSC & ENET
-	 * can't access cache coherent regions.  However, testing has shown
-	 * that the MPSC, at least, still has this bug.
-	 */
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- *****************************************************************************
- *
- *	MV64360-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * mv64360_translate_size()
- *
- * On the MV64360, the size register is set similar to the size you get
- * from a pci config space BAR register.  That is, programmed from LSB to MSB
- * as a sequence of 1's followed by a sequence of 0's. IOW, "size -1" with the
- * assumption that the size is a power of 2.
- */
-static u32 __init
-mv64360_translate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	return mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * mv64360_untranslate_size()
- *
- * Translate the size register value of a window into a window size.
- */
-static u32 __init
-mv64360_untranslate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	if (size > 0) {
-		size >>= (32 - num_bits);
-		size++;
-		size <<= (32 - num_bits);
-	}
-
-	return size;
-}
-
-/*
- * mv64360_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-struct {
-	u32	fcn;
-	u32	base_hi_bar;
-	u32	base_lo_bar;
-} static mv64360_reg_addrs[2][4] __initdata = {
-	{{ 0, 0x14, 0x10 }, { 0, 0x1c, 0x18 },
-	 { 1, 0x14, 0x10 }, { 1, 0x1c, 0x18 }},
-	{{ 0, 0x94, 0x90 }, { 0, 0x9c, 0x98 },
-	 { 1, 0x94, 0x90 }, { 1, 0x9c, 0x98 }}
-};
-
-static void __init
-mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8 save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_hi_bar, 0);
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_lo_bar,
-		mv64x60_mask(base,20) | 0xc);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 mv64360_offset[2][2] __initdata = {{0x20, 0x24}, {0xa0, 0xa4}};
-
-static void __init
-mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][0], (base << 16));
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][1], 0);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_is_enabled_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- * Note that this doesn't work for windows on the PCI slave side but we don't
- * check those so its okay.
- */
-static u32 __init
-mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra, rc = 0;
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			rc = (mv64x60_read(bh, MV64360_CPU_BAR_ENABLE) &
-				(1 << (extra & 0x1f))) == 0;
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			rc = (mv64x60_read(bh,
-				mv64360_32bit_windows[window].base_reg) &
-					(1 << (extra & 0x1f))) != 0;
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			rc = (mv64x60_read(bh, MV64360_ENET2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			rc = (mv64x60_read(bh, MV64360_MPSC2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x3))) == 0;
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			rc = (mv64x60_read(bh, MV64360_IDMA2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_is_enabled: %s\n",
-				"32bit table corrupted");
-		}
-	}
-
-	return rc;
-}
-
-/*
- * mv64360_enable_window_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- */
-static void __init
-mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("enable 32bit window: %d\n", window);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_clr_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_set_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_clr_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_clr_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_clr_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_disable_window_32bit()
- *
- * On a MV64360, a window is disabled by either setting a bit in the
- * CPU BAR Enable reg or clearing a bit in the window's base reg.
- */
-static void __init
-mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_32bit_windows[window].base_reg,
-		mv64360_32bit_windows[window].size_reg);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_set_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_clr_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_enable_window_64bit()
- *
- * On the MV64360, a 64-bit window is enabled by setting a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg!= 0) &&
-		(mv64360_64bit_windows[window].size_reg != 0)) {
-
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_set_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_window_64bit()
- *
- * On a MV64360, a 64-bit window is disabled by clearing a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_64bit_windows[window].base_lo_reg,
-		mv64360_64bit_windows[window].size_reg);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg != 0) &&
-			(mv64360_64bit_windows[window].size_reg != 0)) {
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_clr_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_all_windows()
- *
- * The MV64360 has a few windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	preserve, i;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			mv64360_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			mv64360_disable_window_64bit(bh, i);
-
-	/* Turn off PCI->MEM access cntl wins not in mv64360_64bit_windows[] */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff);
-}
-
-/*
- * mv64360_config_io2mem_windows()
- *
- * ENET, MPSC, and IDMA ctlrs on the MV64[34]60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- */
-static u32 enet_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_ENET2MEM_0_WIN, MV64x60_ENET2MEM_1_WIN,
-	MV64x60_ENET2MEM_2_WIN, MV64x60_ENET2MEM_3_WIN,
-};
-
-static u32 mpsc_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_MPSC2MEM_0_WIN, MV64x60_MPSC2MEM_1_WIN,
-	MV64x60_MPSC2MEM_2_WIN, MV64x60_MPSC2MEM_3_WIN,
-};
-
-static u32 idma_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_IDMA2MEM_0_WIN, MV64x60_IDMA2MEM_1_WIN,
-	MV64x60_IDMA2MEM_2_WIN, MV64x60_IDMA2MEM_3_WIN,
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] __initdata =
-	{ 0xe, 0xd, 0xb, 0x7 };
-
-static void __init
-mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	pr_debug("config_io2regs_windows: enet, mpsc, idma -> bridge regs\n");
-
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_2, 0);
-
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_1, 0);
-
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_2, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_3, 0);
-
-	/* Assume that mem ctlr has no more windows than embedded I/O ctlr */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, enet_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->enet_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, enet_tab[i]);
-
-			/* Give enet r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, mpsc_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->mpsc_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, mpsc_tab[i]);
-
-			/* Give mpsc r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, idma_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->idma_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, idma_tab[i]);
-
-			/* Give idma r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3,
-				(0x3 << (i << 1)));
-		}
-}
-
-/*
- * mv64360_set_mpsc2regs_window()
- *
- * MPSC has a window to the bridge's internal registers.  Call this routine
- * to change that window so it doesn't conflict with the windows mapping the
- * mpsc to system memory.
- */
-static void __init
-mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base)
-{
-	pr_debug("set mpsc->internal regs, base: 0x%x\n", base);
-	mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000);
-}
-
-/*
- * mv64360_chip_specific_init()
- *
- * Implement errata workarounds for the MV64360.
- */
-static void __init
-mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-/*
- * mv64460_chip_specific_init()
- *
- * Implement errata workarounds for the MV64460.
- */
-static void __init
-mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24) | (1<<25));
-	mv64x60_set_bits(bh, MV64460_D_UNIT_MMASK, (1<<1) | (1<<4));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-/* Export the hotswap register via sysfs for enum event monitoring */
-#define	VAL_LEN_MAX	11 /* 32-bit hex or dec stringified number + '\n' */
-
-static DEFINE_MUTEX(mv64xxx_hs_lock);
-
-static ssize_t
-mv64xxx_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count < VAL_LEN_MAX)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_read_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	mv64x60_pci_exclude_bridge = save_exclude;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t
-mv64xxx_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count <= 0)
-		return -EINVAL;
-
-	if (sscanf(buf, "%i", &v) == 1) {
-		if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-			return -ERESTARTSYS;
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-				MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-		mutex_unlock(&mv64xxx_hs_lock);
-	}
-	else
-		count = -EINVAL;
-
-	return count;
-}
-
-static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */
-	.attr = {
-		.name = "hs_reg",
-		.mode = S_IRUGO | S_IWUSR,
-	},
-	.size  = VAL_LEN_MAX,
-	.read  = mv64xxx_hs_reg_read,
-	.write = mv64xxx_hs_reg_write,
-};
-
-/* Provide sysfs file indicating if this platform supports the hs_reg */
-static ssize_t
-mv64xxx_hs_reg_valid_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device	*pdev;
-	struct mv64xxx_pdata	*pdp;
-	u32			v;
-
-	pdev = container_of(dev, struct platform_device, dev);
-	pdp = (struct mv64xxx_pdata *)pdev->dev.platform_data;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	v = pdp->hs_reg_valid;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "%i\n", v);
-}
-static DEVICE_ATTR(hs_reg_valid, S_IRUGO, mv64xxx_hs_reg_valid_show, NULL);
-
-static int __init
-mv64xxx_sysfs_init(void)
-{
-	sysfs_create_bin_file(&mv64xxx_device.dev.kobj, &mv64xxx_hs_reg_attr);
-	sysfs_create_file(&mv64xxx_device.dev.kobj,&dev_attr_hs_reg_valid.attr);
-	return 0;
-}
-subsys_initcall(mv64xxx_sysfs_init);
-#endif
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
deleted file mode 100644
index e1876261e5dc..000000000000
--- a/arch/ppc/syslib/mv64x60_dbg.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- *****************************************************************************
- *
- *	Low-level MPSC/UART I/O routines
- *
- *****************************************************************************
- */
-
-
-#include <linux/irq.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-
-#define	MPSC_CHR_1	0x000c
-#define	MPSC_CHR_2	0x0010
-
-static struct mv64x60_handle	mv64x60_dbg_bh;
-
-void
-mv64x60_progress_init(u32 base)
-{
-	mv64x60_dbg_bh.v_base = base;
-	return;
-}
-
-static void
-mv64x60_polled_putc(int chan, char c)
-{
-	u32	offset;
-
-	if (chan == 0)
-		offset = 0x8000;
-	else
-		offset = 0x9000;
-
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_1, (u32)c);
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_2, 0x200);
-	udelay(2000);
-}
-
-void
-mv64x60_mpsc_progress(char *s, unsigned short hex)
-{
-	volatile char	c;
-
-	mv64x60_polled_putc(0, '\r');
-
-	while ((c = *s++) != 0)
-		mv64x60_polled_putc(0, c);
-
-	mv64x60_polled_putc(0, '\n');
-	mv64x60_polled_putc(0, '\r');
-
-	return;
-}
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-#if defined(CONFIG_KGDB)
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-void
-putDebugChar(unsigned char c)
-{
-	mv64x60_polled_putc(KGDB_PORT, (char)c);
-}
-
-int
-getDebugChar(void)
-{
-	unsigned char	c;
-
-	while (!mv64x60_polled_getc(KGDB_PORT, &c));
-	return (int)c;
-}
-
-void
-putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-void
-kgdb_interruptible(int enable)
-{
-}
-
-void
-kgdb_map_scc(void)
-{
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-}
-#endif	/* CONFIG_KGDB */
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
deleted file mode 100644
index 4bf1ad17bf1a..000000000000
--- a/arch/ppc/syslib/mv64x60_win.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * Tables with info on how to manipulate the 32 & 64 bit windows on the
- * various types of Marvell bridge chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/mv643xx.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-/*
- *****************************************************************************
- *
- *	Tables describing how to set up windows on each type of bridge
- *
- *****************************************************************************
- */
-struct mv64x60_32bit_window
-	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->SRAM Window (64260 has no integrated SRAM) */
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Snoop Windows */
-	[MV64x60_CPU_SNOOP_0_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_0,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_1_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_1,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_2_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_2,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_3_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_3,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->SRAM Window (64260 doesn't have separate windows) */
-	/* MPSC->SRAM Window (64260 doesn't have separate windows) */
-	/* IDMA->SRAM Window (64260 doesn't have separate windows) */
-};
-
-struct mv64x60_64bit_window
-	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Snoop Windows */
-	[MV64x60_PCI02MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Snoop Windows */
-	[MV64x60_PCI12MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-};
-
-struct mv64x60_32bit_window
-	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 1 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 2 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 3 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 4 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 5 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 6 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 7 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 8 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 9 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 10 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 11 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 12 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 13 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 14 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 15 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 16 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 17 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 18 },
-	/* CPU->SRAM Window */
-	[MV64x60_CPU2SRAM_WIN] = {
-		.base_reg		= MV64360_CPU2SRAM_BASE,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 19 },
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	/* CPU Snoop Windows -- don't exist on 64360 */
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->System Memory Windows */
-	[MV64x60_ENET2MEM_0_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_0_BASE,
-		.size_reg		= MV64360_ENET2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 0 },
-	[MV64x60_ENET2MEM_1_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_1_BASE,
-		.size_reg		= MV64360_ENET2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 1 },
-	[MV64x60_ENET2MEM_2_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_2_BASE,
-		.size_reg		= MV64360_ENET2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 2 },
-	[MV64x60_ENET2MEM_3_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_3_BASE,
-		.size_reg		= MV64360_ENET2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 3 },
-	[MV64x60_ENET2MEM_4_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_4_BASE,
-		.size_reg		= MV64360_ENET2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 4 },
-	[MV64x60_ENET2MEM_5_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_5_BASE,
-		.size_reg		= MV64360_ENET2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 5 },
-	/* MPSC->System Memory Windows */
-	[MV64x60_MPSC2MEM_0_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_0_BASE,
-		.size_reg		= MV64360_MPSC2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 0 },
-	[MV64x60_MPSC2MEM_1_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_1_BASE,
-		.size_reg		= MV64360_MPSC2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 1 },
-	[MV64x60_MPSC2MEM_2_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_2_BASE,
-		.size_reg		= MV64360_MPSC2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 2 },
-	[MV64x60_MPSC2MEM_3_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_3_BASE,
-		.size_reg		= MV64360_MPSC2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 3 },
-	/* IDMA->System Memory Windows */
-	[MV64x60_IDMA2MEM_0_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_0_BASE,
-		.size_reg		= MV64360_IDMA2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 0 },
-	[MV64x60_IDMA2MEM_1_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_1_BASE,
-		.size_reg		= MV64360_IDMA2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 1 },
-	[MV64x60_IDMA2MEM_2_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_2_BASE,
-		.size_reg		= MV64360_IDMA2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 2 },
-	[MV64x60_IDMA2MEM_3_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_3_BASE,
-		.size_reg		= MV64360_IDMA2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 3 },
-	[MV64x60_IDMA2MEM_4_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_4_BASE,
-		.size_reg		= MV64360_IDMA2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 4 },
-	[MV64x60_IDMA2MEM_5_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_5_BASE,
-		.size_reg		= MV64360_IDMA2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 5 },
-	[MV64x60_IDMA2MEM_6_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_6_BASE,
-		.size_reg		= MV64360_IDMA2MEM_6_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 6 },
-	[MV64x60_IDMA2MEM_7_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_7_BASE,
-		.size_reg		= MV64360_IDMA2MEM_7_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 7 },
-};
-
-struct mv64x60_64bit_window
-	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 0->MEM Snoop Windows -- don't exist on 64360 */
-	/* PCI 1->MEM Snoop Windows -- don't exist on 64360 */
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
deleted file mode 100644
index a6fb7dcfa738..000000000000
--- a/arch/ppc/syslib/ocp.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * ocp.c
- *
- *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *          Mipsys - France
- *
- *          Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- *          Additional support and port to 2.6 LDM/sysfs by
- *          Matt Porter <mporter@kernel.crashing.org>
- *          Copyright 2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  OCP (On Chip Peripheral) is a software emulated "bus" with a
- *  pseudo discovery method for dumb peripherals. Usually these type
- *  of peripherals are found on embedded SoC (System On a Chip)
- *  processors or highly integrated system controllers that have
- *  a host bridge and many peripherals.  Common examples where
- *  this is already used include the PPC4xx, MPC52xx,
- *  and MV64xxx parts.
- *
- *  This subsystem creates a standard OCP bus type within the
- *  device model.  The devices on the OCP bus are seeded by an
- *  an initial OCP device array created by the arch-specific
- *  Device entries can be added/removed/modified through OCP
- *  helper functions to accommodate system and  board-specific
- *  parameters commonly found in embedded systems. OCP also
- *  provides a standard method for devices to describe extended
- *  attributes about themselves to the system.  A standard access
- *  method allows OCP drivers to obtain the information, both
- *  SoC-specific and system/board-specific, needed for operation.
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/errno.h>
-
-//#define DBG(x)	printk x
-#define DBG(x)
-
-extern int mem_init_done;
-
-extern struct ocp_def core_ocp[];	/* Static list of devices, provided by
-					   CPU core */
-
-LIST_HEAD(ocp_devices);			/* List of all OCP devices */
-DECLARE_RWSEM(ocp_devices_sem);		/* Global semaphores for those lists */
-
-static int ocp_inited;
-
-/* Sysfs support */
-#define OCP_DEF_ATTR(field, format_string)				\
-static ssize_t								\
-show_##field(struct device *dev, struct device_attribute *attr, char *buf)				\
-{									\
-	struct ocp_device *odev = to_ocp_dev(dev);			\
-									\
-	return sprintf(buf, format_string, odev->def->field);		\
-}									\
-static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-
-OCP_DEF_ATTR(vendor, "0x%04x\n");
-OCP_DEF_ATTR(function, "0x%04x\n");
-OCP_DEF_ATTR(index, "0x%04x\n");
-#ifdef CONFIG_PTE_64BIT
-OCP_DEF_ATTR(paddr, "0x%016Lx\n");
-#else
-OCP_DEF_ATTR(paddr, "0x%08lx\n");
-#endif
-OCP_DEF_ATTR(irq, "%d\n");
-OCP_DEF_ATTR(pm, "%lu\n");
-
-void ocp_create_sysfs_dev_files(struct ocp_device *odev)
-{
-	struct device *dev = &odev->dev;
-
-	/* Current OCP device def attributes */
-	device_create_file(dev, &dev_attr_vendor);
-	device_create_file(dev, &dev_attr_function);
-	device_create_file(dev, &dev_attr_index);
-	device_create_file(dev, &dev_attr_paddr);
-	device_create_file(dev, &dev_attr_irq);
-	device_create_file(dev, &dev_attr_pm);
-	/* Current OCP device additions attributes */
-	if (odev->def->additions && odev->def->show)
-		odev->def->show(dev);
-}
-
-/**
- *	ocp_device_match	-	Match one driver to one device
- *	@drv: driver to match
- *	@dev: device to match
- *
- *	This function returns 0 if the driver and device don't match
- */
-static int
-ocp_device_match(struct device *dev, struct device_driver *drv)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(drv);
-	const struct ocp_device_id *ids = ocp_drv->id_table;
-
-	if (!ids)
-		return 0;
-
-	while (ids->vendor || ids->function) {
-		if ((ids->vendor == OCP_ANY_ID
-		     || ids->vendor == ocp_dev->def->vendor)
-		    && (ids->function == OCP_ANY_ID
-			|| ids->function == ocp_dev->def->function))
-		        return 1;
-		ids++;
-	}
-	return 0;
-}
-
-static int
-ocp_device_probe(struct device *dev)
-{
-	int error = 0;
-	struct ocp_driver *drv;
-	struct ocp_device *ocp_dev;
-
-	drv = to_ocp_drv(dev->driver);
-	ocp_dev = to_ocp_dev(dev);
-
-	if (drv->probe) {
-		error = drv->probe(ocp_dev);
-		if (error >= 0) {
-			ocp_dev->driver = drv;
-			error = 0;
-		}
-	}
-	return error;
-}
-
-static int
-ocp_device_remove(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
-	if (ocp_dev->driver) {
-		if (ocp_dev->driver->remove)
-			ocp_dev->driver->remove(ocp_dev);
-		ocp_dev->driver = NULL;
-	}
-	return 0;
-}
-
-static int
-ocp_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->suspend)
-		return ocp_drv->suspend(ocp_dev, state);
-	return 0;
-}
-
-static int
-ocp_device_resume(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->resume)
-		return ocp_drv->resume(ocp_dev);
-	return 0;
-}
-
-struct bus_type ocp_bus_type = {
-	.name = "ocp",
-	.match = ocp_device_match,
-	.probe = ocp_device_probe,
-	.remove = ocp_device_remove,
-	.suspend = ocp_device_suspend,
-	.resume = ocp_device_resume,
-};
-
-/**
- *	ocp_register_driver	-	Register an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's probe() callback is called either recursively
- *	by this function or upon later call of ocp_driver_init
- *
- *	NOTE: Detection of devices is a 2 pass step on this implementation,
- *	hotswap isn't supported. First, all OCP devices are put in the device
- *	list, _then_ all drivers are probed on each match.
- */
-int
-ocp_register_driver(struct ocp_driver *drv)
-{
-	/* initialize common driver fields */
-	drv->driver.name = drv->name;
-	drv->driver.bus = &ocp_bus_type;
-
-	/* register with core */
-	return driver_register(&drv->driver);
-}
-
-/**
- *	ocp_unregister_driver	-	Unregister an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's remove() callback is called recursively
- *	by this function for any device already registered
- */
-void
-ocp_unregister_driver(struct ocp_driver *drv)
-{
-	DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
-
-	driver_unregister(&drv->driver);
-
-	DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
-}
-
-/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
-static struct ocp_device *
-__ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct list_head	*entry;
-	struct ocp_device	*dev, *found = NULL;
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
-			continue;
-		if (function != OCP_ANY_ID && function != dev->def->function)
-			continue;
-		if (index != OCP_ANY_INDEX && index != dev->def->index)
-			continue;
-		found = dev;
-		break;
-	}
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_find_device	-	Find a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given function by it's
- *	index, it's typically used to find the MAL or ZMII associated
- *	with an EMAC or similar horrors.
- *      You can pass vendor, though you usually want OCP_ANY_ID there...
- */
-struct ocp_device *
-ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-
-	down_read(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	up_read(&ocp_devices_sem);
-
-	return dev;
-}
-
-/**
- *	ocp_get_one_device -	Find a def by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given ocp_def by it's
- *	vendor, function, and index.  The main purpose for is to
- *	allow modification of the def before binding to the driver
- */
-struct ocp_def *
-ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-	struct ocp_def		*found = NULL;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
-		vendor, function, index));
-
-	dev = ocp_find_device(vendor, function, index);
-
-	if (dev)
-		found = dev->def;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
-		vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_add_one_device	-	Add a device
- *	@def: static device definition structure
- *
- *	This function adds a device definition to the
- *	device list. It may only be called before
- *	ocp_driver_init() and will return an error
- *	otherwise.
- */
-int
-ocp_add_one_device(struct ocp_def *def)
-{
-	struct	ocp_device	*dev;
-
-	DBG(("ocp: ocp_add_one_device()...\n"));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	if (mem_init_done)
-		dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	else
-		dev = alloc_bootmem(sizeof(*dev));
-
-	if (dev == NULL)
-		return 1;
-	memset(dev, 0, sizeof(*dev));
-	dev->def = def;
-	dev->current_state = 4;
-	sprintf(dev->name, "OCP device %04x:%04x:%04x",
-		dev->def->vendor, dev->def->function, dev->def->index);
-	down_write(&ocp_devices_sem);
-	list_add_tail(&dev->link, &ocp_devices);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_add_one_device()...done\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_remove_one_device -	Remove a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows removal of a given function by its
- *	index. It may only be called before ocp_driver_init()
- *	and will return an error otherwise.
- */
-int
-ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device *dev;
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	down_write(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	list_del(&dev->link);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
-
-	return 0;
-}
-
-/**
- *	ocp_for_each_device	-	Iterate over OCP devices
- *	@callback: routine to execute for each ocp device.
- *	@arg: user data to be passed to callback routine.
- *
- *	This routine holds the ocp_device semaphore, so the
- *	callback routine cannot modify the ocp_device list.
- */
-void
-ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
-{
-	struct list_head *entry;
-
-	if (callback) {
-		down_read(&ocp_devices_sem);
-		list_for_each(entry, &ocp_devices)
-			callback(list_entry(entry, struct ocp_device, link),
-				arg);
-		up_read(&ocp_devices_sem);
-	}
-}
-
-/**
- *	ocp_early_init	-	Init OCP device management
- *
- *	This function builds the list of devices before setup_arch.
- *	This allows platform code to modify the device lists before
- *	they are bound to drivers (changes to paddr, removing devices
- *	etc)
- */
-int __init
-ocp_early_init(void)
-{
-	struct ocp_def	*def;
-
-	DBG(("ocp: ocp_early_init()...\n"));
-
-	/* Fill the devices list */
-	for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
-		ocp_add_one_device(def);
-
-	DBG(("ocp: ocp_early_init()... done.\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_driver_init	-	Init OCP device management
- *
- *	This function is meant to be called via OCP bus registration.
- */
-static int __init
-ocp_driver_init(void)
-{
-	int ret = 0, index = 0;
-	struct device *ocp_bus;
-	struct list_head *entry;
-	struct ocp_device *dev;
-
-	if (ocp_inited)
-		return ret;
-	ocp_inited = 1;
-
-	DBG(("ocp: ocp_driver_init()...\n"));
-
-	/* Allocate/register primary OCP bus */
-	ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (ocp_bus == NULL)
-		return 1;
-	strcpy(ocp_bus->bus_id, "ocp");
-
-	bus_register(&ocp_bus_type);
-
-	device_register(ocp_bus);
-
-	/* Put each OCP device into global device list */
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		sprintf(dev->dev.bus_id, "%2.2x", index);
-		dev->dev.parent = ocp_bus;
-		dev->dev.bus = &ocp_bus_type;
-		device_register(&dev->dev);
-		ocp_create_sysfs_dev_files(dev);
-		index++;
-	}
-
-	DBG(("ocp: ocp_driver_init()... done.\n"));
-
-	return 0;
-}
-
-postcore_initcall(ocp_driver_init);
-
-EXPORT_SYMBOL(ocp_bus_type);
-EXPORT_SYMBOL(ocp_find_device);
-EXPORT_SYMBOL(ocp_register_driver);
-EXPORT_SYMBOL(ocp_unregister_driver);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
deleted file mode 100644
index 67dffe27b5c3..000000000000
--- a/arch/ppc/syslib/open_pic.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-#if defined(CONFIG_PRPMC800)
-#define OPENPIC_BIG_ENDIAN
-#endif
-
-void __iomem *OpenPIC_Addr;
-static volatile struct OpenPIC __iomem *OpenPIC = NULL;
-
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-u_int OpenPIC_NumInitSenses __initdata = 0;
-u_char *OpenPIC_InitSenses __initdata = NULL;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic_irq_offset;
-static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
-static int openpic_cascade_irq = -1;
-static int (*openpic_cascade_fn)(void);
-
-/* Global Operations */
-static void openpic_disable_8259_pass_through(void);
-static void openpic_set_spurious(u_int vector);
-
-#ifdef CONFIG_SMP
-/* Interprocessor Interrupts */
-static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id);
-#endif
-
-/* Timer Interrupts */
-static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic_maptimer(u_int timer, cpumask_t cpumask);
-
-/* Interrupt Sources */
-static void openpic_enable_irq(u_int irq);
-static void openpic_disable_irq(u_int irq);
-static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-#ifdef notused
-static void openpic_enable_8259_pass_through(void);
-static u_int openpic_get_spurious(void);
-static void openpic_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic_end_irq(unsigned int irq_nr);
-static void openpic_ack_irq(unsigned int irq_nr);
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-struct hw_interrupt_type open_pic = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_irq,
-	.disable	= openpic_disable_irq,
-	.ack		= openpic_ack_irq,
-	.end		= openpic_end_irq,
-	.set_affinity	= openpic_set_affinity,
-};
-
-#ifdef CONFIG_SMP
-static void openpic_end_ipi(unsigned int irq_nr);
-static void openpic_ack_ipi(unsigned int irq_nr);
-static void openpic_enable_ipi(unsigned int irq_nr);
-static void openpic_disable_ipi(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic_ipi = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_ipi,
-	.disable	= openpic_disable_ipi,
-	.ack		= openpic_ack_ipi,
-	.end		= openpic_end_ipi,
-};
-#endif /* CONFIG_SMP */
-
-/*
- *  Accesses to the current processor's openpic registers
- */
-#ifdef CONFIG_SMP
-#define THIS_CPU		Processor[cpu]
-#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
-#define CHECK_THIS_CPU		check_arg_cpu(cpu)
-#else
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-#endif /* CONFIG_SMP */
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-#define check_arg_irq(irq) \
-    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
-	|| ISR[irq - open_pic_irq_offset] == 0) { \
-      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
-      dump_stack(); }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
-	dump_stack(); }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-u_int openpic_read(volatile u_int __iomem *addr)
-{
-	u_int val;
-
-#ifdef OPENPIC_BIG_ENDIAN
-	val = in_be32(addr);
-#else
-	val = in_le32(addr);
-#endif
-	return val;
-}
-
-static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
-{
-#ifdef OPENPIC_BIG_ENDIAN
-	out_be32(addr, val);
-#else
-	out_le32(addr, val);
-#endif
-}
-
-static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
-{
-	u_int val = openpic_read(addr);
-	return val & mask;
-}
-
-inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic_read(addr);
-	openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, 0);
-}
-
-static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, mask);
-}
-
-static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
-				    u_int field)
-{
-	openpic_setfield(addr, OPENPIC_MASK);
-	while (openpic_read(addr) & OPENPIC_ACTIVITY);
-	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-#ifdef CONFIG_SMP
-/* yes this is right ... bug, feature, you decide! -- tgall */
-u_int openpic_read_IPI(volatile u_int __iomem * addr)
-{
-         u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN)
-        val = in_be32(addr);
-#else
-        val = in_le32(addr);
-#endif
-        return val;
-}
-
-/* because of the power3 be / le above, this is needed */
-inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
-{
-        u_int  val = openpic_read_IPI(addr);
-        openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, 0);
-}
-
-static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, mask);
-}
-
-static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
-{
-        openpic_setfield_IPI(addr, OPENPIC_MASK);
-
-        /* wait until it's not in use */
-        /* BenH: Is this code really enough ? I would rather check the result
-         *       and eventually retry ...
-         */
-        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
-
-        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-/* On platforms that may use EPIC serial mode, the default is enabled. */
-int epic_serial_mode = 1;
-
-static void __init openpic_eicr_set_clk(u_int clkval)
-{
-	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
-}
-
-static void __init openpic_enable_sie(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_SIE);
-}
-#endif
-
-#if defined(CONFIG_EPIC_SERIAL_MODE)
-static void openpic_reset(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-#endif
-
-void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
-{
-	volatile OpenPIC_Source __iomem *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC_Addr) {
-		printk("No OpenPIC found !\n");
-		return;
-	}
-	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	/* Have to start from ground zero.
-	*/
-	openpic_reset();
-#endif
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC);
-	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic_maptimer(i, CPU_MASK_NONE);
-	}
-
-#ifdef CONFIG_SMP
-	/* Initialize IPI interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
-	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
-		/* Disabled, increased priorities 10..13 */
-		openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
-				OPENPIC_VEC_IPI+i+offset);
-		/* IPIs are per-CPU */
-		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
-		irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
-	}
-#endif
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
-
-	openpic_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Default priority */
-		openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
-				(sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
-	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	openpic_disable_8259_pass_through();
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	if (epic_serial_mode) {
-		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
-		openpic_enable_sie();
-	}
-#endif
-	openpic_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
-}
-
-#ifdef notused
-static void openpic_enable_8259_pass_through(void)
-{
-	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-static void openpic_disable_8259_pass_through(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
-}
-
-u_int openpic_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-
-void openpic_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic_get_spurious(void)
-{
-	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-static void openpic_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-#ifdef CONFIG_SMP
-/*
- * Convert a cpu mask from logical to physical cpu numbers.
- */
-static inline cpumask_t physmask(cpumask_t cpumask)
-{
-	int i;
-	cpumask_t mask = CPU_MASK_NONE;
-
-	cpus_and(cpumask, cpu_online_map, cpumask);
-
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_isset(i, cpumask))
-			cpu_set(smp_hw_index[i], mask);
-
-	return mask;
-}
-#else
-#define physmask(cpumask)	(cpumask)
-#endif
-
-void openpic_reset_processor_phys(u_int mask)
-{
-	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
-}
-
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
-static DEFINE_SPINLOCK(openpic_setup_lock);
-#endif
-
-#ifdef CONFIG_SMP
-/*
- *  Initialize an interprocessor interrupt (and disable it)
- *
- *  ipi: OpenPIC interprocessor interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
-{
-	check_arg_ipi(ipi);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Send an IPI to one or more CPUs
- *
- *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
- *  and not a system-wide interrupt number
- */
-void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_ipi(ipi);
-	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
-		      cpus_addr(physmask(cpumask))[0]);
-}
-
-void openpic_request_IPIs(void)
-{
-	int i;
-
-	/*
-	 * Make sure this matches what is defined in smp.c for
-	 * smp_message_{pass|recv}() or what shows up in
-	 * /proc/interrupts will be wrong!!! --Troy */
-
-	if (OpenPIC == NULL)
-		return;
-
-	/*
- 	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI0 (call function)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI1 (reschedule)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI2 (invalidate tlb)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI3 (xmon break)", NULL);
-
-	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
-		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
-}
-
-/*
- * Do per-cpu setup for SMP systems.
- *
- * Get IPI's working and start taking interrupts.
- *   -- Cort
- */
-
-void __devinit do_openpic_setup_cpu(void)
-{
-#ifdef CONFIG_IRQ_ALL_CPUS
- 	int i;
-	cpumask_t msk = CPU_MASK_NONE;
-#endif
-	spin_lock(&openpic_setup_lock);
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-	cpu_set(smp_hw_index[smp_processor_id()], msk);
-
- 	/* let the openpic know we want intrs. default affinity
- 	 * is 0xffffffff until changed via /proc
- 	 * That's how it's done on x86. If we want it differently, then
- 	 * we should make sure we also change the default values of
-	 * irq_desc[].affinity in irq.c.
- 	 */
- 	for (i = 0; i < NumSources; i++)
-		openpic_mapirq(i, msk, CPU_MASK_ALL);
-#endif /* CONFIG_IRQ_ALL_CPUS */
- 	openpic_set_priority(0);
-
-	spin_unlock(&openpic_setup_lock);
-}
-#endif /* CONFIG_SMP */
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
-{
-	cpumask_t phys = physmask(cpumask);
-	check_arg_timer(timer);
-	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
-		      cpus_addr(phys)[0]);
-}
-
-/*
- * Change the priority of an interrupt
- */
-void __init
-openpic_set_irq_priority(u_int irq, u_int pri)
-{
-	check_arg_irq(irq);
-	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				pri << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-/*
- * Hookup a cascade to the OpenPIC.
- */
-
-static struct irqaction openpic_cascade_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-};
-
-void __init
-openpic_hookup_cascade(u_int irq, char *name,
-	int (*cascade_fn)(void))
-{
-	openpic_cascade_irq = irq;
-	openpic_cascade_fn = cascade_fn;
-
-	if (setup_irq(irq, &openpic_cascade_irqaction))
-		printk("Unable to get OpenPIC IRQ %d for cascade\n",
-				irq - open_pic_irq_offset);
-}
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic_enable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb(); /* sync is probably useless here */
-	} while (openpic_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic_disable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-#ifdef CONFIG_SMP
-/*
- *  Enable/disable an IPI interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-void openpic_enable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-
-}
-
-void openpic_disable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-}
-#endif
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (!cpus_empty(keepmask)) {
-		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
-		cpus_and(irqdest, irqdest, keepmask);
-		cpus_or(physmask, physmask, irqdest);
-	}
-	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic_ack_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	openpic_disable_irq(irq_nr);
-	openpic_eoi();
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_end_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq_nr].action)
-		openpic_enable_irq(irq_nr);
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
-{
-	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
-}
-
-#ifdef CONFIG_SMP
-static void openpic_ack_ipi(unsigned int irq_nr)
-{
-	openpic_eoi();
-}
-
-static void openpic_end_ipi(unsigned int irq_nr)
-{
-}
-
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id)
-{
-	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset);
-	return IRQ_HANDLED;
-}
-
-#endif /* CONFIG_SMP */
-
-int
-openpic_get_irq(void)
-{
-	int irq = openpic_irq();
-
-	/*
-	 * Check for the cascade interrupt and call the cascaded
-	 * interrupt controller function (usually i8259_irq) if so.
-	 * This should move to irq.c eventually.  -- paulus
-	 */
-	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
-		int cirq = openpic_cascade_fn();
-
-		/* Allow for the cascade being shared with other devices */
-		if (cirq != -1) {
-			irq = cirq;
-			openpic_eoi();
-		}
-	} else if (irq == OPENPIC_VEC_SPURIOUS)
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_SMP
-void
-smp_openpic_message_pass(int target, int msg)
-{
-	cpumask_t mask = CPU_MASK_ALL;
-	/* make sure we're sending something that translates to an IPI */
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		openpic_cause_IPI(msg, mask);
-		break;
-	case MSG_ALL_BUT_SELF:
-		cpu_clear(smp_processor_id(), mask);
-		openpic_cause_IPI(msg, mask);
-		break;
-	default:
-		openpic_cause_IPI(msg, cpumask_of_cpu(target));
-		break;
-	}
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
- 	openpic_set_priority(0xf);
-
-	open_pic.enable = openpic_cached_enable_irq;
-	open_pic.disable = openpic_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
-		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= OPENPIC_VEC_SPURIOUS);
-	
-	openpic_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic.enable = openpic_enable_irq;
-	open_pic.disable = openpic_disable_irq;
-
- 	openpic_set_priority(0);
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct sysdev_class openpic_sysclass = {
-	.name = "openpic",
-};
-
-static struct sys_device device_openpic = {
-	.id		= 0,
-	.cls		= &openpic_sysclass,
-};
-
-static struct sysdev_driver driver_openpic = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic_suspend,
-	.resume		= &openpic_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
-	rc = sysdev_class_register(&openpic_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
deleted file mode 100644
index 449075a04798..000000000000
--- a/arch/ppc/syslib/open_pic2.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- *  This is a duplicate of open_pic.c that deals with U3s MPIC on
- *  G5 PowerMacs. It's the same file except it's using big endian
- *  register accesses
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-void *OpenPIC2_Addr;
-static volatile struct OpenPIC *OpenPIC2 = NULL;
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-extern  u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic2_irq_offset;
-static volatile OpenPIC_Source *ISR[NR_IRQS];
-
-/* Global Operations */
-static void openpic2_disable_8259_pass_through(void);
-static void openpic2_set_priority(u_int pri);
-static void openpic2_set_spurious(u_int vector);
-
-/* Timer Interrupts */
-static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic2_maptimer(u_int timer, u_int cpumask);
-
-/* Interrupt Sources */
-static void openpic2_enable_irq(u_int irq);
-static void openpic2_disable_irq(u_int irq);
-static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-static void openpic2_reset(void);
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void);
-static u_int openpic2_get_priority(void);
-static u_int openpic2_get_spurious(void);
-static void openpic2_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic2_end_irq(unsigned int irq_nr);
-static void openpic2_ack_irq(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic2 = {
-	.typename = " OpenPIC2 ",
-	.enable = openpic2_enable_irq,
-	.disable = openpic2_disable_irq,
-	.ack = openpic2_ack_irq,
-	.end = openpic2_end_irq,
-};
-
-/*
- *  Accesses to the current processor's openpic registers
- *  On cascaded controller, this is only CPU 0
- */
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-extern unsigned long* _get_SP(void);
-#define check_arg_irq(irq) \
-    if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
-	|| ISR[irq - open_pic2_irq_offset] == 0) { \
-      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
-      /*print_backtrace(_get_SP());*/ }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
-	/*print_backtrace(_get_SP());*/ }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-static u_int openpic2_read(volatile u_int *addr)
-{
-	u_int val;
-
-	val = in_be32(addr);
-	return val;
-}
-
-static inline void openpic2_write(volatile u_int *addr, u_int val)
-{
-	out_be32(addr, val);
-}
-
-static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
-{
-	u_int val = openpic2_read(addr);
-	return val & mask;
-}
-
-inline void openpic2_writefield(volatile u_int *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic2_read(addr);
-	openpic2_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, 0);
-}
-
-static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, mask);
-}
-
-static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
-				    u_int field)
-{
-	openpic2_setfield(addr, OPENPIC_MASK);
-	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
-	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-static void openpic2_reset(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-
-void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
-{
-	volatile OpenPIC_Source *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic2_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC2_Addr) {
-		printk("No OpenPIC2 found !\n");
-		return;
-	}
-	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic2_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC2);
-	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic2_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic2_maptimer(i, 0);
-	}
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);
-
-	openpic2_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic2_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Priority 8 */
-		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic2_mapirq(i, 1<<0, 0);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic2;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
-	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);
-
-	openpic2_disable_8259_pass_through();
-	openpic2_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
-}
-
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void)
-{
-	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_disable_8259_pass_through(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic2_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic2_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
-}
-
-#ifdef notused
-static u_int openpic2_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-#endif /* notused */
-
-static void __init openpic2_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic2_get_spurious(void)
-{
-	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-static DEFINE_SPINLOCK(openpic2_setup_lock);
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic2_maptimer(u_int timer, u_int cpumask)
-{
-	check_arg_timer(timer);
-	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
-		      cpumask);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic2_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				9 << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic2_enable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-       	openpic2_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-       	do {
-       		mb(); /* sync is probably useless here */
-       	} while (openpic2_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic2_disable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-	openpic2_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (keepmask != 0)
-		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
-	openpic2_write(&ISR[irq]->Destination, physmask);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic2_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic2_ack_irq(unsigned int irq_nr)
-{
-	openpic2_disable_irq(irq_nr);
-	openpic2_eoi();
-}
-
-static void openpic2_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		openpic2_enable_irq(irq_nr);
-}
-
-int
-openpic2_get_irq(void)
-{
-	int irq = openpic2_irq();
-
-	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic2_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic2_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	open_pic2.enable = openpic2_cached_enable_irq;
-	open_pic2.disable = openpic2_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
-		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	openpic2_reset();
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
-	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));
-	
-	openpic2_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic2.enable = openpic2_enable_irq;
-	open_pic2.disable = openpic2_disable_irq;
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-/* HACK ALERT */
-static struct sysdev_class openpic2_sysclass = {
-	.name = "openpic2",
-};
-
-static struct sys_device device_openpic2 = {
-	.id		= 0,
-	.cls		= &openpic2_sysclass,
-};
-
-static struct sysdev_driver driver_openpic2 = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic2_suspend,
-	.resume		= &openpic2_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic2_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC2_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
-	rc = sysdev_class_register(&openpic2_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic2_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h
deleted file mode 100644
index 3a25de7cb572..000000000000
--- a/arch/ppc/syslib/open_pic_defs.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *	The Open Programmable Interrupt Controller (PIC)
- *	Register Interface Specification Revision 1.2
- *
- *	Issue Date: October 1995
- *
- *	Issued jointly by Advanced Micro Devices and Cyrix Corporation
- *
- *	AMD is a registered trademark of Advanced Micro Devices, Inc.
- *	Copyright (C) 1995, Advanced Micro Devices, Inc. and Cyrix, Inc.
- *	All Rights Reserved.
- *
- *  To receive a copy of this documentation, send an email to openpic@amd.com.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _LINUX_OPENPIC_H
-#define _LINUX_OPENPIC_H
-
-#ifdef __KERNEL__
-
-    /*
-     *  OpenPIC supports up to 2048 interrupt sources and up to 32 processors
-     */
-
-#define OPENPIC_MAX_SOURCES	2048
-#define OPENPIC_MAX_PROCESSORS	32
-#define OPENPIC_MAX_ISU		16
-
-#define OPENPIC_NUM_TIMERS	4
-#define OPENPIC_NUM_IPI		4
-#define OPENPIC_NUM_PRI		16
-#define OPENPIC_NUM_VECTORS	256
-
-
-
-    /*
-     *  OpenPIC Registers are 32 bits and aligned on 128 bit boundaries
-     */
-
-typedef struct _OpenPIC_Reg {
-    u_int Reg;					/* Little endian! */
-    char Pad[0xc];
-} OpenPIC_Reg;
-
-
-    /*
-     *  Per Processor Registers
-     */
-
-typedef struct _OpenPIC_Processor {
-    /*
-     *  Private Shadow Registers (for SLiC backwards compatibility)
-     */
-    u_int IPI0_Dispatch_Shadow;			/* Write Only */
-    char Pad1[0x4];
-    u_int IPI0_Vector_Priority_Shadow;		/* Read/Write */
-    char Pad2[0x34];
-    /*
-     *  Interprocessor Interrupt Command Ports
-     */
-    OpenPIC_Reg _IPI_Dispatch[OPENPIC_NUM_IPI];	/* Write Only */
-    /*
-     *  Current Task Priority Register
-     */
-    OpenPIC_Reg _Current_Task_Priority;		/* Read/Write */
-    char Pad3[0x10];
-    /*
-     *  Interrupt Acknowledge Register
-     */
-    OpenPIC_Reg _Interrupt_Acknowledge;		/* Read Only */
-    /*
-     *  End of Interrupt (EOI) Register
-     */
-    OpenPIC_Reg _EOI;				/* Read/Write */
-    char Pad5[0xf40];
-} OpenPIC_Processor;
-
-
-    /*
-     *  Timer Registers
-     */
-
-typedef struct _OpenPIC_Timer {
-    OpenPIC_Reg _Current_Count;			/* Read Only */
-    OpenPIC_Reg _Base_Count;			/* Read/Write */
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Timer;
-
-
-    /*
-     *  Global Registers
-     */
-
-typedef struct _OpenPIC_Global {
-    /*
-     *  Feature Reporting Registers
-     */
-    OpenPIC_Reg _Feature_Reporting0;		/* Read Only */
-    OpenPIC_Reg _Feature_Reporting1;		/* Future Expansion */
-    /*
-     *  Global Configuration Registers
-     */
-    OpenPIC_Reg _Global_Configuration0;		/* Read/Write */
-    OpenPIC_Reg _Global_Configuration1;		/* Future Expansion */
-    /*
-     *  Vendor Specific Registers
-     */
-    OpenPIC_Reg _Vendor_Specific[4];
-    /*
-     *  Vendor Identification Register
-     */
-    OpenPIC_Reg _Vendor_Identification;		/* Read Only */
-    /*
-     *  Processor Initialization Register
-     */
-    OpenPIC_Reg _Processor_Initialization;	/* Read/Write */
-    /*
-     *  IPI Vector/Priority Registers
-     */
-    OpenPIC_Reg _IPI_Vector_Priority[OPENPIC_NUM_IPI];	/* Read/Write */
-    /*
-     *  Spurious Vector Register
-     */
-    OpenPIC_Reg _Spurious_Vector;		/* Read/Write */
-    /*
-     *  Global Timer Registers
-     */
-    OpenPIC_Reg _Timer_Frequency;		/* Read/Write */
-    OpenPIC_Timer Timer[OPENPIC_NUM_TIMERS];
-    char Pad1[0xee00];
-} OpenPIC_Global;
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-typedef struct _OpenPIC_Source {
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Source, *OpenPIC_SourcePtr;
-
-
-    /*
-     *  OpenPIC Register Map
-     */
-
-struct OpenPIC {
-    char Pad1[0x1000];
-    /*
-     *  Global Registers
-     */
-    OpenPIC_Global Global;
-    /*
-     *  Interrupt Source Configuration Registers
-     */
-    OpenPIC_Source Source[OPENPIC_MAX_SOURCES];
-    /*
-     *  Per Processor Registers
-     */
-    OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
-};
-
-    /*
-     *  Current Task Priority Register
-     */
-
-#define OPENPIC_CURRENT_TASK_PRIORITY_MASK	0x0000000f
-
-    /*
-     *  Who Am I Register
-     */
-
-#define OPENPIC_WHO_AM_I_ID_MASK		0x0000001f
-
-    /*
-     *  Feature Reporting Register 0
-     */
-
-#define OPENPIC_FEATURE_LAST_SOURCE_MASK	0x07ff0000
-#define OPENPIC_FEATURE_LAST_SOURCE_SHIFT	16
-#define OPENPIC_FEATURE_LAST_PROCESSOR_MASK	0x00001f00
-#define OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT	8
-#define OPENPIC_FEATURE_VERSION_MASK		0x000000ff
-
-    /*
-     *  Global Configuration Register 0
-     */
-
-#define OPENPIC_CONFIG_RESET			0x80000000
-#define OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE	0x20000000
-#define OPENPIC_CONFIG_BASE_MASK		0x000fffff
-
-    /*
-     *  Global Configuration Register 1
-     *  This is the EICR on EPICs.
-     */
-
-#define OPENPIC_EICR_S_CLK_MASK			0x70000000
-#define OPENPIC_EICR_SIE			0x08000000
-
-    /*
-     *  Vendor Identification Register
-     */
-
-#define OPENPIC_VENDOR_ID_STEPPING_MASK		0x00ff0000
-#define OPENPIC_VENDOR_ID_STEPPING_SHIFT	16
-#define OPENPIC_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define OPENPIC_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define OPENPIC_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-
-    /*
-     *  Vector/Priority Registers
-     */
-
-#define OPENPIC_MASK				0x80000000
-#define OPENPIC_ACTIVITY			0x40000000	/* Read Only */
-#define OPENPIC_PRIORITY_MASK			0x000f0000
-#define OPENPIC_PRIORITY_SHIFT			16
-#define OPENPIC_VECTOR_MASK			0x000000ff
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-#define OPENPIC_POLARITY_POSITIVE		0x00800000
-#define OPENPIC_POLARITY_NEGATIVE		0x00000000
-#define OPENPIC_POLARITY_MASK			0x00800000
-#define OPENPIC_SENSE_LEVEL			0x00400000
-#define OPENPIC_SENSE_EDGE			0x00000000
-#define OPENPIC_SENSE_MASK			0x00400000
-
-
-    /*
-     *  Timer Registers
-     */
-
-#define OPENPIC_COUNT_MASK			0x7fffffff
-#define OPENPIC_TIMER_TOGGLE			0x80000000
-#define OPENPIC_TIMER_COUNT_INHIBIT		0x80000000
-
-
-    /*
-     *  Aliases to make life simpler
-     */
-
-/* Per Processor Registers */
-#define IPI_Dispatch(i)			_IPI_Dispatch[i].Reg
-#define Current_Task_Priority		_Current_Task_Priority.Reg
-#define Interrupt_Acknowledge		_Interrupt_Acknowledge.Reg
-#define EOI				_EOI.Reg
-
-/* Global Registers */
-#define Feature_Reporting0		_Feature_Reporting0.Reg
-#define Feature_Reporting1		_Feature_Reporting1.Reg
-#define Global_Configuration0		_Global_Configuration0.Reg
-#define Global_Configuration1		_Global_Configuration1.Reg
-#define Vendor_Specific(i)		_Vendor_Specific[i].Reg
-#define Vendor_Identification		_Vendor_Identification.Reg
-#define Processor_Initialization	_Processor_Initialization.Reg
-#define IPI_Vector_Priority(i)		_IPI_Vector_Priority[i].Reg
-#define Spurious_Vector			_Spurious_Vector.Reg
-#define Timer_Frequency			_Timer_Frequency.Reg
-
-/* Timer Registers */
-#define Current_Count			_Current_Count.Reg
-#define Base_Count			_Base_Count.Reg
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-/* Interrupt Source Registers */
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_OPENPIC_H */
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
deleted file mode 100644
index ee20a86fcc4b..000000000000
--- a/arch/ppc/syslib/pci_auto.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The CardBus support is very preliminary.  Preallocating space is
- * the way to go but will require some change in card services to
- * make it useful.  Eventually this will ensure that we can put
- * multiple CB bridges behind multiple P2P bridges.  For now, at
- * least it ensures that we place the CB bridge BAR and assigned
- * initial bus numbers.  I definitely need to do something about
- * the lack of 16-bit I/O support. -MDP
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/pci-bridge.h>
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static int pciauto_upper_iospc;
-static int pciauto_upper_memspc;
-
-void __init pciauto_setup_bars(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int bar_limit)
-{
-	int bar_response, bar_size, bar_value;
-	int bar, addr_mask;
-	int * upper_limit;
-	int found_mem64 = 0;
-
-	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
-		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				0xffffffff);
-		early_read_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				&bar_response);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
-		} else {
-			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
-			upper_limit = &pciauto_upper_memspc;
-			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
-		}
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
-
-		/* Write it out and update our limit */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				bar_value);
-
-		*upper_limit = bar_value;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					bar,
-					0x00000000);
-			found_mem64 = 0;
-		}
-
-		DBG("size=0x%x, address=0x%x\n",
-			bar_size, bar_value);
-	}
-
-}
-
-void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 1MB boundary */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT,
-			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT_UPPER16,
-			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
-
-	/* Zero upper 32 bits of prefetchable base/limit */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_BASE_UPPER32,
-			0);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_LIMIT_UPPER32,
-			0);
-}
-
-void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Round memory allocator to 1MB boundary.
-	 * If no space used, allocate minimum.
-	 */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	if (*memsave == pciauto_upper_memspc)
-		pciauto_upper_memspc -= 0x00100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Allocate 1MB for pre-fretch */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-
-	pciauto_upper_memspc -= 0x100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	if (*iosave == pciauto_upper_iospc)
-		pciauto_upper_iospc -= 0x1000;
-
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE,
-			(pciauto_upper_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE_UPPER16,
-			pciauto_upper_iospc >> 16);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x20,
-			pciauto_upper_memspc - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x30,
-			pciauto_upper_iospc - 1);
-}
-
-void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	pciauto_upper_memspc -= 0x00400000;
-	pciauto_upper_iospc -= 0x00004000;
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x1c,
-			pciauto_upper_memspc);
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x2c,
-			pciauto_upper_iospc);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
-{
-	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
-	unsigned short vid;
-	unsigned char header_type;
-
-	/*
-	 * Fetch our I/O and memory space upper boundaries used
-	 * to allocated base addresses on this hose.
-	 */
-	if (current_bus == hose->first_busno) {
-		pciauto_upper_iospc = hose->io_space.end + 1;
-		pciauto_upper_memspc = hose->mem_space.end + 1;
-	}
-
-	sub_bus = current_bus;
-
-	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
-		/* Skip our host bridge */
-		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
-			continue;
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		/* If config space read fails from this device, move on */
-		if (early_read_config_byte(hose,
-				current_bus,
-				pci_devfn,
-				PCI_HEADER_TYPE,
-				&header_type))
-			continue;
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose,
-				current_bus,
-				pci_devfn,
-				PCI_VENDOR_ID,
-				&vid);
-
-		if (vid != 0xffff) {
-			early_read_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_1);
-
-				pciauto_prescan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-				/* Place CardBus Socket/ExCA registers */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_0);
-
-				pciauto_prescan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else {
-				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-					unsigned char prg_iface;
-
-					early_read_config_byte(hose,
-							current_bus,
-							pci_devfn,
-							PCI_CLASS_PROG,
-							&prg_iface);
-					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
-						continue;
-					}
-				}
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_5);
-
-				/*
-				 * Enable some standard settings
-				 */
-				early_read_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						&cmdstat);
-				early_write_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						cmdstat |
-						PCI_COMMAND_IO |
-						PCI_COMMAND_MEMORY |
-						PCI_COMMAND_MASTER);
-				early_write_config_byte(hose,
-						current_bus,
-						pci_devfn,
-						PCI_LATENCY_TIMER,
-						0x80);
-			}
-		}
-	}
-	return sub_bus;
-}
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
deleted file mode 100644
index c3b7b8bfbcfe..000000000000
--- a/arch/ppc/syslib/ppc403_pic.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Module name: ppc403_pic.c
- *
- *    Description:
- *      Interrupt controller driver for PowerPC 403-based processors.
- */
-
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* Function Prototypes */
-
-static void ppc403_aic_enable(unsigned int irq);
-static void ppc403_aic_disable(unsigned int irq);
-static void ppc403_aic_disable_and_ack(unsigned int irq);
-
-static struct hw_interrupt_type ppc403_aic = {
-	.typename = "403GC AIC",
-	.enable = ppc403_aic_enable,
-	.disable = ppc403_aic_disable,
-	.ack = ppc403_aic_disable_and_ack,
-};
-
-int
-ppc403_pic_get_irq(void)
-{
-	int irq;
-	unsigned long bits;
-
-	/*
-	 * Only report the status of those interrupts that are actually
-	 * enabled.
-	 */
-
-	bits = mfdcr(DCRN_EXISR) & mfdcr(DCRN_EXIER);
-
-	/*
-	 * Walk through the interrupts from highest priority to lowest, and
-	 * report the first pending interrupt found.
-	 * We want PPC, not C bit numbering, so just subtract the ffs()
-	 * result from 32.
-	 */
-	irq = 32 - ffs(bits);
-
-	if (irq == NR_AIC_IRQS)
-		irq = -1;
-
-	return (irq);
-}
-
-static void
-ppc403_aic_enable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable_and_ack(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-	mtdcr(DCRN_EXISR, (1 << (31 - bit)));
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	ppc_cached_irq_mask[0] = 0;
-
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[0]);
-
-	ppc_md.get_irq = ppc403_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; i++)
-		irq_desc[i].chip = &ppc403_aic;
-}
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
deleted file mode 100644
index 9e9035693bfa..000000000000
--- a/arch/ppc/syslib/ppc405_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Authors: Frank Rowand <frank_rowand@mvista.com>,
- * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com
- * Further modifications by Armin Kuster <akuster@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#include <asm/pci-bridge.h>
-#include <asm/ibm_ocp_pci.h>
-
-
-extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
-extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
-			  unsigned char pin);
-
-void
-ppc405_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-	unsigned long max_host_addr;
-	unsigned long min_host_addr;
-	struct resource *res;
-
-	/*
-	 * openbios puts some graphics cards in the same range as the host
-	 * controller uses to map to SDRAM.  Fix it.
-	 */
-
-	min_host_addr = 0;
-	max_host_addr = PPC405_PCI_MEM_BASE - 1;
-
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		res = dev->resource + i;
-		if (!res->start)
-			continue;
-		if ((res->flags & IORESOURCE_MEM) &&
-		    (((res->start >= min_host_addr)
-		      && (res->start <= max_host_addr))
-		     || ((res->end >= min_host_addr)
-			 && (res->end <= max_host_addr))
-		     || ((res->start < min_host_addr)
-			 && (res->end > max_host_addr))
-		    )
-		    ) {
-
-			/* force pcibios_assign_resources() to assign a new address */
-			res->end -= res->start;
-			res->start = 0;
-		}
-	}
-}
-
-static int
-ppc4xx_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	/* We prevent us from seeing ourselves to avoid having
-	 * the kernel try to remap our BAR #1 and fuck up bus
-	 * master from external PCI devices
-	 */
-	return (bus == 0 && devfn == 0);
-}
-
-void
-ppc4xx_find_bridges(void)
-{
-	struct pci_controller *hose_a;
-	struct pcil0_regs *pcip;
-	unsigned int tmp_addr;
-	unsigned int tmp_size;
-	unsigned int reg_index;
-	unsigned int new_pmm_max = 0;
-	unsigned int new_pmm_min = 0;
-
-	isa_io_base = 0;
-	isa_mem_base = 0;
-	pci_dram_offset = 0;
-
-	/* Setup PCI32 hose */
-	hose_a = pcibios_alloc_controller();
-	if (!hose_a)
-		return;
-	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
-			   PPC405_PCI_CONFIG_DATA);
-
-	pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
-	if (pcip != NULL) {
-
-#if defined(CONFIG_BIOS_FIXUP)
-		bios_fixup(hose_a, pcip);
-#endif
-		new_pmm_min = 0xffffffff;
-		for (reg_index = 0; reg_index < 3; reg_index++) {
-			tmp_size = in_le32(&pcip->pmm[reg_index].ma);	// mask & attrs
-			/* test the enable bit */
-			if ((tmp_size & 0x1) == 0)
-				continue;
-			tmp_addr = in_le32(&pcip->pmm[reg_index].pcila);	// PCI addr
-			if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
-				printk(KERN_DEBUG
-				       "Disabling mapping to PCI mem addr 0x%8.8x\n",
-				       tmp_addr);
-				out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1);	// *_PMMOMA
-				continue;
-			}
-			tmp_addr = in_le32(&pcip->pmm[reg_index].la);	// *_PMMOLA
-			if (tmp_addr < new_pmm_min)
-				new_pmm_min = tmp_addr;
-			tmp_addr = tmp_addr +
-				(0xffffffff - (tmp_size & 0xffffc000));
-			if (tmp_addr > PPC405_PCI_UPPER_MEM) {
-				new_pmm_max = tmp_addr;	// PPC405_PCI_UPPER_MEM
-			} else {
-				new_pmm_max = PPC405_PCI_UPPER_MEM;
-			}
-
-		}		// for
-
-		iounmap(pcip);
-	}
-
-	hose_a->first_busno = 0;
-	hose_a->last_busno = 0xff;
-	hose_a->pci_mem_offset = 0;
-
-	/* Setup bridge memory/IO ranges & resources
-	 * TODO: Handle firmware setting up a legacy ISA mem base
-	 */
-	hose_a->io_space.start = PPC405_PCI_LOWER_IO;
-	hose_a->io_space.end = PPC405_PCI_UPPER_IO;
-	hose_a->mem_space.start = new_pmm_min;
-	hose_a->mem_space.end = new_pmm_max;
-	hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
-	hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
-	hose_a->io_resource.start = 0;
-	hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
-	hose_a->io_resource.flags = IORESOURCE_IO;
-	hose_a->io_resource.name = "PCI I/O";
-	hose_a->mem_resources[0].start = new_pmm_min;
-	hose_a->mem_resources[0].end = new_pmm_max;
-	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
-	hose_a->mem_resources[0].name = "PCI Memory";
-	isa_io_base = (int) hose_a->io_base_virt;
-	isa_mem_base = 0;	/*     ISA not implemented */
-	ISA_DMA_THRESHOLD = 0x00ffffff;	/* ??? ISA not implemented */
-
-	/* Scan busses & initial setup by pci_auto */
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-	hose_a->last_busno = 0;
-
-	/* Setup ppc_md */
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pci_exclude_device = ppc4xx_exclude_device;
-	ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc405_map_irq;
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
deleted file mode 100644
index dd5d4b958c31..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-
-#include "ppc440spe_pcie.h"
-
-static int
-pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8(hose->cfg_data + offset);
-		break;
-	case 2:
-		*val = in_le16(hose->cfg_data + offset);
-		break;
-	default:
-		*val = in_le32(hose->cfg_data + offset);
-		break;
-	}
-
-	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	switch (len) {
-	case 1:
-		out_8(hose->cfg_data + offset, val);
-		break;
-	case 2:
-		out_le16(hose->cfg_data + offset, val);
-		break;
-	default:
-		out_le32(hose->cfg_data + offset, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pcie_pci_ops =
-{
-	.read  = pcie_read_config,
-	.write = pcie_write_config
-};
-
-enum {
-	PTYPE_ENDPOINT		= 0x0,
-	PTYPE_LEGACY_ENDPOINT	= 0x1,
-	PTYPE_ROOT_PORT		= 0x4,
-
-	LNKW_X1			= 0x1,
-	LNKW_X4			= 0x4,
-	LNKW_X8			= 0x8
-};
-
-static void check_error(void)
-{
-	u32 valPE0, valPE1, valPE2;
-
-	/* SDR0_PEGPLLLCT1 reset */
-	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
-		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
-	}
-
-	valPE0 = SDR_READ(PESDR0_RCSSET);
-	valPE1 = SDR_READ(PESDR1_RCSSET);
-	valPE2 = SDR_READ(PESDR2_RCSSET);
-
-	/* SDR0_PExRCSSET rstgu */
-	if ( !(valPE0 & 0x01000000) ||
-	     !(valPE1 & 0x01000000) ||
-	     !(valPE2 & 0x01000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if ( !(valPE0 & 0x00010000) ||
-	     !(valPE1 & 0x00010000) ||
-	     !(valPE2 & 0x00010000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ( (valPE0 & 0x00001000) ||
-	     (valPE1 & 0x00001000) ||
-	     (valPE2 & 0x00001000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ( (valPE0 & 0x10000000) ||
-	     (valPE1 & 0x10000000) ||
-	     (valPE2 & 0x10000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ( (valPE0 & 0x00100000) ||
-	     (valPE1 & 0x00100000) ||
-	     (valPE2 & 0x00100000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
-	}
-
-	/* SDR0_PExRCSSET shutdown */
-	if ( (valPE0 & 0x00000100) ||
-	     (valPE1 & 0x00000100) ||
-	     (valPE2 & 0x00000100)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
-	}
-}
-
-/*
- * Initialize PCI Express core as described in User Manual section 27.12.1
- */
-int ppc440spe_init_pcie(void)
-{
-	/* Set PLL clock receiver to LVPECL */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
-	check_error();
-
-	printk(KERN_INFO "PCIE initialization OK\n");
-
-	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
-		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
-		       SDR_READ(PESDR0_PLLLCT2));
-
-	/* De-assert reset of PCIe PLL, wait for lock */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
-	udelay(3);
-
-	return 0;
-}
-
-int ppc440spe_init_pcie_rootport(int port)
-{
-	static int core_init;
-	void __iomem *utl_base;
-	u32 val = 0;
-	int i;
-
-	if (!core_init) {
-		++core_init;
-		i = ppc440spe_init_pcie();
-		if (i)
-			return i;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a root port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-
-		SDR_WRITE(PESDR0_RCSSET,
-			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR1_RCSSET,
-			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR2_RCSSET,
-			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
-
-	mdelay(1000);
-
-	switch (port) {
-	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
-	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
-	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
-	}
-
-	if (!(val & (1 << 20)))
-		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
-	else
-		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
-
-	switch (port) {
-	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
-	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
-	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
-	}
-
-	/*
-	 * Map UTL registers at 0xc_1000_0n00
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
-	}
-
-	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
-	out_be32(utl_base + PEUTL_INTR,    0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
-	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
-	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
-
-	iounmap(utl_base);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	switch (port) {
-	case 0:
-		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
-	}
-
-#if 0
-	/* Dump all config regs */
-	for (i = 0x300; i <= 0x320; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x340; i <= 0x353; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x370; i <= 0x383; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3a0; i <= 0x3a2; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3c0; i <= 0x3c3; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-#endif
-
-	mdelay(100);
-
-	return 0;
-}
-
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
-{
-	void __iomem *mbase;
-
-	/*
-	 * Map 16MB, which is enough for 4 bits of bus #
-	 */
-	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
-				   1 << 24);
-	hose->ops = &pcie_pci_ops;
-
-	/*
-	 * Set bus numbers on our root port
-	 */
-	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
-	out_8(mbase + PCI_PRIMARY_BUS, 0);
-	out_8(mbase + PCI_SECONDARY_BUS, 0);
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0);
-	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-
-		break;
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	}
-
-	/* Set up 16GB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-	out_le32(mbase + PECFG_PIM0LAL, 0);
-	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16(mbase + PCI_COMMAND,
-		 in_le16(mbase + PCI_COMMAND) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	iounmap(mbase);
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
deleted file mode 100644
index 55b765ad3272..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
-#define __PPC_SYSLIB_PPC440SPE_PCIE_H
-
-#define DCRN_SDR0_CFGADDR	0x00e
-#define DCRN_SDR0_CFGDATA	0x00f
-
-#define DCRN_PCIE0_BASE		0x100
-#define DCRN_PCIE1_BASE		0x120
-#define DCRN_PCIE2_BASE		0x140
-#define PCIE0			DCRN_PCIE0_BASE
-#define PCIE1			DCRN_PCIE1_BASE
-#define PCIE2			DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
-#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
-#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
-#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1		0x03a0
-#define PESDR0_PLLLCT2		0x03a1
-#define PESDR0_PLLLCT3		0x03a2
-
-#define PESDR0_UTLSET1		0x0300
-#define PESDR0_UTLSET2		0x0301
-#define PESDR0_DLPSET		0x0302
-#define PESDR0_LOOP		0x0303
-#define PESDR0_RCSSET		0x0304
-#define PESDR0_RCSSTS		0x0305
-#define PESDR0_HSSL0SET1	0x0306
-#define PESDR0_HSSL0SET2	0x0307
-#define PESDR0_HSSL0STS		0x0308
-#define PESDR0_HSSL1SET1	0x0309
-#define PESDR0_HSSL1SET2	0x030a
-#define PESDR0_HSSL1STS		0x030b
-#define PESDR0_HSSL2SET1	0x030c
-#define PESDR0_HSSL2SET2	0x030d
-#define PESDR0_HSSL2STS		0x030e
-#define PESDR0_HSSL3SET1	0x030f
-#define PESDR0_HSSL3SET2	0x0310
-#define PESDR0_HSSL3STS		0x0311
-#define PESDR0_HSSL4SET1	0x0312
-#define PESDR0_HSSL4SET2	0x0313
-#define PESDR0_HSSL4STS		0x0314
-#define PESDR0_HSSL5SET1	0x0315
-#define PESDR0_HSSL5SET2	0x0316
-#define PESDR0_HSSL5STS		0x0317
-#define PESDR0_HSSL6SET1	0x0318
-#define PESDR0_HSSL6SET2	0x0319
-#define PESDR0_HSSL6STS		0x031a
-#define PESDR0_HSSL7SET1	0x031b
-#define PESDR0_HSSL7SET2	0x031c
-#define PESDR0_HSSL7STS		0x031d
-#define PESDR0_HSSCTLSET	0x031e
-#define PESDR0_LANE_ABCD	0x031f
-#define PESDR0_LANE_EFGH	0x0320
-
-#define PESDR1_UTLSET1		0x0340
-#define PESDR1_UTLSET2		0x0341
-#define PESDR1_DLPSET		0x0342
-#define PESDR1_LOOP		0x0343
-#define PESDR1_RCSSET		0x0344
-#define PESDR1_RCSSTS		0x0345
-#define PESDR1_HSSL0SET1	0x0346
-#define PESDR1_HSSL0SET2	0x0347
-#define PESDR1_HSSL0STS		0x0348
-#define PESDR1_HSSL1SET1	0x0349
-#define PESDR1_HSSL1SET2	0x034a
-#define PESDR1_HSSL1STS		0x034b
-#define PESDR1_HSSL2SET1	0x034c
-#define PESDR1_HSSL2SET2	0x034d
-#define PESDR1_HSSL2STS		0x034e
-#define PESDR1_HSSL3SET1	0x034f
-#define PESDR1_HSSL3SET2	0x0350
-#define PESDR1_HSSL3STS		0x0351
-#define PESDR1_HSSCTLSET	0x0352
-#define PESDR1_LANE_ABCD	0x0353
-
-#define PESDR2_UTLSET1		0x0370
-#define PESDR2_UTLSET2		0x0371
-#define PESDR2_DLPSET		0x0372
-#define PESDR2_LOOP		0x0373
-#define PESDR2_RCSSET		0x0374
-#define PESDR2_RCSSTS		0x0375
-#define PESDR2_HSSL0SET1	0x0376
-#define PESDR2_HSSL0SET2	0x0377
-#define PESDR2_HSSL0STS		0x0378
-#define PESDR2_HSSL1SET1	0x0379
-#define PESDR2_HSSL1SET2	0x037a
-#define PESDR2_HSSL1STS		0x037b
-#define PESDR2_HSSL2SET1	0x037c
-#define PESDR2_HSSL2SET2	0x037d
-#define PESDR2_HSSL2STS		0x037e
-#define PESDR2_HSSL3SET1	0x037f
-#define PESDR2_HSSL3SET2	0x0380
-#define PESDR2_HSSL3STS		0x0381
-#define PESDR2_HSSCTLSET	0x0382
-#define PESDR2_LANE_ABCD	0x0383
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBBSZ		0x20
-#define PEUTL_OPDBSZ		0x68
-#define PEUTL_IPHBSZ		0x70
-#define PEUTL_IPDBSZ		0x78
-#define PEUTL_OUTTR		0x90
-#define PEUTL_INTR		0x98
-#define PEUTL_PCTL		0xa0
-#define PEUTL_RCIRQEN		0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA		0x210
-#define PECFG_BAR0HMPA		0x214
-#define PECFG_PIMEN		0x33c
-#define PECFG_PIM0LAL		0x340
-#define PECFG_PIM0LAH		0x344
-#define PECFG_POM0LAL		0x380
-#define PECFG_POM0LAH		0x384
-
-int ppc440spe_init_pcie(void);
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
-#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
deleted file mode 100644
index bd301868996b..000000000000
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * IBM PPC4xx DMA engine core library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/ppc4xx_dma.h>
-
-ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
-
-int
-ppc4xx_get_dma_status(void)
-{
-	return (mfdcr(DCRN_DMASR));
-}
-
-void
-ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_src_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
-#else
-	mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
-#endif
-}
-
-void
-ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dst_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
-#else
-	mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
-#endif
-}
-
-void
-ppc4xx_enable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
-				       DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
-				       DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
-				       DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
-
-	if (p_dma_ch->in_use) {
-		printk("enable_dma: channel %d in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("enable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	if (p_dma_ch->mode == DMA_MODE_READ) {
-		/* peripheral to memory */
-		ppc4xx_set_src_addr(dmanr, 0);
-		ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
-	} else if (p_dma_ch->mode == DMA_MODE_WRITE) {
-		/* memory to peripheral */
-		ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
-		ppc4xx_set_dst_addr(dmanr, 0);
-	}
-
-	/* for other xfer modes, the addresses are already set */
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	control &= ~(DMA_TM_MASK | DMA_TD);	/* clear all mode bits */
-	if (p_dma_ch->mode == DMA_MODE_MM) {
-		/* software initiated memory to memory */
-		control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-	}
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/*
-	 * Clear the CS, TS, RI bits for the channel from DMASR.  This
-	 * has been observed to happen correctly only after the mode and
-	 * ETD/DCE bits in DMACRx are set above.  Must do this before
-	 * enabling the channel.
-	 */
-
-	mtdcr(DCRN_DMASR, status_bits[dmanr]);
-
-	/*
-	 * For device-paced transfers, Terminal Count Enable apparently
-	 * must be on, and this must be turned on after the mode, etc.
-	 * bits are cleared above (at least on Redwood-6).
-	 */
-
-	if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
-	    (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
-		control |= DMA_TCE_ENABLE;
-
-	/*
-	 * Now enable the channel.
-	 */
-
-	control |= (p_dma_ch->mode | DMA_CE_ENABLE);
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 1;
-}
-
-void
-ppc4xx_disable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (!p_dma_ch->in_use) {
-		printk("disable_dma: channel %d not in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("disable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CE_ENABLE;
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 0;
-}
-
-/*
- * Sets the dma mode for single DMA transfers only.
- * For scatter/gather transfers, the mode is passed to the
- * alloc_dma_handle() function as one of the parameters.
- *
- * The mode is simply saved and used later.  This allows
- * the driver to call set_dma_mode() and set_dma_addr() in
- * any order.
- *
- * Valid mode values are:
- *
- * DMA_MODE_READ          peripheral to memory
- * DMA_MODE_WRITE         memory to peripheral
- * DMA_MODE_MM            memory to memory
- * DMA_MODE_MM_DEVATSRC   device-paced memory to memory, device at src
- * DMA_MODE_MM_DEVATDST   device-paced memory to memory, device at dst
- */
-int
-ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dma_mode: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->mode = mode;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the DMA Count register. Note that 'count' is in bytes.
- * However, the DMA Count register counts the number of "transfers",
- * where each transfer is equal to the bus width.  Thus, count
- * MUST be a multiple of the bus width.
- */
-void
-ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (count & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (count & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (count & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("set_dma_count: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk
-			    ("Warning: set_dma_count count 0x%x bus width %d\n",
-			     count, p_dma_ch->pwidth);
-	}
-#endif
-
-	count = count >> p_dma_ch->shift;
-
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
-}
-
-/*
- *   Returns the number of bytes left to be transferred.
- *   After a DMA transfer, this should return zero.
- *   Reading this while a DMA transfer is still in progress will return
- *   unpredictable results.
- */
-int
-ppc4xx_get_dma_residue(unsigned int dmanr)
-{
-	unsigned int count;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
-
-	return (count << p_dma_ch->shift);
-}
-
-/*
- * Sets the DMA address for a memory to peripheral or peripheral
- * to memory transfer.  The address is just saved in the channel
- * structure for now and used later in enable_dma().
- */
-void
-ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if ((unsigned) addr & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if ((unsigned) addr & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if ((unsigned) addr & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
-			       addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	/* save dma address and program it later after we know the xfer mode */
-	p_dma_ch->addr = addr;
-}
-
-/*
- * Sets both DMA addresses for a memory to memory transfer.
- * For memory to peripheral or peripheral to memory transfers
- * the function set_dma_addr() should be used instead.
- */
-void
-ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
-		     phys_addr_t dst_dma_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-			case PW_8:
-				break;
-			case PW_16:
-				if (((unsigned) src_dma_addr & 0x1) ||
-						((unsigned) dst_dma_addr & 0x1)
-				   )
-					error = 1;
-				break;
-			case PW_32:
-				if (((unsigned) src_dma_addr & 0x3) ||
-						((unsigned) dst_dma_addr & 0x3)
-				   )
-					error = 1;
-				break;
-			case PW_64:
-				if (((unsigned) src_dma_addr & 0x7) ||
-						((unsigned) dst_dma_addr & 0x7)
-				   )
-					error = 1;
-				break;
-			default:
-				printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
-						p_dma_ch->pwidth);
-				return;
-		}
-		if (error)
-			printk
-				("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
-				 src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	ppc4xx_set_src_addr(dmanr, src_dma_addr);
-	ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
-}
-
-/*
- * Enables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be enabled, if
- * they were previously disabled.
- */
-int
-ppc4xx_enable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 1;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Disables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be disabled, if
- * they were previously enabled.
- */
-int
-ppc4xx_disable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 0;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Configures a DMA channel, including the peripheral bus width, if a
- * peripheral is attached to the channel, the polarity of the DMAReq and
- * DMAAck signals, etc.  This information should really be setup by the boot
- * code, since most likely the configuration won't change dynamically.
- * If the kernel has to call this function, it's recommended that it's
- * called from platform specific init code.  The driver should not need to
- * call this function.
- */
-int
-ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
-{
-	unsigned int polarity;
-	uint32_t control = 0;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	DMA_MODE_READ = (unsigned long) DMA_TD;	/* Peripheral to Memory */
-	DMA_MODE_WRITE = 0;	/* Memory to Peripheral */
-
-	if (!p_init) {
-		printk("ppc4xx_init_dma_channel: NULL p_init\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	/* Setup the control register based on the values passed to
-	 * us in p_init.  Then, over-write the control register with this
-	 * new value.
-	 */
-	control |= SET_DMA_CONTROL;
-
-	/* clear all polarity signals and then "or" in new signal levels */
-	polarity &= ~GET_DMA_POLARITY(dmanr);
-	polarity |= p_init->polarity;
-#if DCRN_POL > 0
-	mtdcr(DCRN_POL, polarity);
-#endif
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/* save these values in our dma channel structure */
-	memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
-
-	/*
-	 * The peripheral width values written in the control register are:
-	 *   PW_8                 0
-	 *   PW_16                1
-	 *   PW_32                2
-	 *   PW_64                3
-	 *
-	 *   Since the DMA count register takes the number of "transfers",
-	 *   we need to divide the count sent to us in certain
-	 *   functions by the appropriate number.  It so happens that our
-	 *   right shift value is equal to the peripheral width value.
-	 */
-	p_dma_ch->shift = p_init->pwidth;
-
-	/*
-	 * Save the control word for easy access.
-	 */
-	p_dma_ch->control = control;
-
-	mtdcr(DCRN_DMASR, 0xffffffff);	/* clear status register */
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * This function returns the channel configuration.
- */
-int
-ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
-{
-	unsigned int polarity;
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	p_dma_ch->cp = GET_DMA_PRIORITY(control);
-	p_dma_ch->pwidth = GET_DMA_PW(control);
-	p_dma_ch->psc = GET_DMA_PSC(control);
-	p_dma_ch->pwc = GET_DMA_PWC(control);
-	p_dma_ch->phc = GET_DMA_PHC(control);
-	p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
-	p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
-	p_dma_ch->shift = GET_DMA_PW(control);
-
-#ifdef CONFIG_PPC4xx_EDMA
-	p_dma_ch->pf = GET_DMA_PREFETCH(control);
-#else
-	p_dma_ch->ch_enable = GET_DMA_CH(control);
-	p_dma_ch->ece_enable = GET_DMA_ECE(control);
-	p_dma_ch->tcd_disable = GET_DMA_TCD(control);
-#endif
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the priority for the DMA channel dmanr.
- * Since this is setup by the hardware init function, this function
- * can be used to dynamically change the priority of a channel.
- *
- * Acceptable priorities:
- *
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- *
- */
-int
-ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if ((priority != PRIORITY_LOW) &&
-	    (priority != PRIORITY_MID_LOW) &&
-	    (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
-		printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= SET_DMA_PRIORITY(priority);
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Returns the width of the peripheral attached to this channel. This assumes
- * that someone who knows the hardware configuration, boot code or some other
- * init code, already set the width.
- *
- * The return value is one of:
- *   PW_8
- *   PW_16
- *   PW_32
- *   PW_64
- *
- *   The function returns 0 on error.
- */
-unsigned int
-ppc4xx_get_peripheral_width(unsigned int dmanr)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	return (GET_DMA_PW(control));
-}
-
-/*
- * Clears the channel status bits
- */
-int
-ppc4xx_clr_dma_status(unsigned int dmanr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
-	return DMA_STATUS_GOOD;
-}
-
-#ifdef CONFIG_PPC4xx_EDMA
-/*
- * Enables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_enable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-        ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Disables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_disable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Sets the burst size (number of peripheral widths) for the channel
- * (BSIZ bits in the control/count register))
- * must be one of:
- *    DMA_CTC_BSIZ_2
- *    DMA_CTC_BSIZ_4
- *    DMA_CTC_BSIZ_8
- *    DMA_CTC_BSIZ_16
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
-	ctc |= (bsize & DMA_CTC_BSIZ_MSK);
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
-#endif /* CONFIG_PPC4xx_EDMA */
-
-EXPORT_SYMBOL(ppc4xx_init_dma_channel);
-EXPORT_SYMBOL(ppc4xx_get_channel_config);
-EXPORT_SYMBOL(ppc4xx_set_channel_priority);
-EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
-EXPORT_SYMBOL(dma_channels);
-EXPORT_SYMBOL(ppc4xx_set_src_addr);
-EXPORT_SYMBOL(ppc4xx_set_dst_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
-EXPORT_SYMBOL(ppc4xx_enable_dma);
-EXPORT_SYMBOL(ppc4xx_disable_dma);
-EXPORT_SYMBOL(ppc4xx_set_dma_mode);
-EXPORT_SYMBOL(ppc4xx_set_dma_count);
-EXPORT_SYMBOL(ppc4xx_get_dma_residue);
-EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_get_dma_status);
-EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
deleted file mode 100644
index ee0da4b4b993..000000000000
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004, 2005 Zultys Technologies
- *
- * Based on original code by
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *    Armin Custer <akuster@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
-*/
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* See comment in include/arch-ppc/ppc4xx_pic.h
- * for more info about these two variables
- */
-extern struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[NR_UICS]
-    __attribute__ ((weak));
-extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
-
-#define IRQ_MASK_UIC0(irq)		(1 << (31 - (irq)))
-#define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
-#define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
-
-#define UIC_HANDLERS(n)							\
-static void ppc4xx_uic##n##_enable(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (irq_desc[irq].status & IRQ_LEVEL)				\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-	ppc_cached_irq_mask[n] |= mask;					\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-}									\
-									\
-static void ppc4xx_uic##n##_disable(unsigned int irq)			\
-{									\
-	ppc_cached_irq_mask[n] &= ~IRQ_MASK_UIC##n(irq);		\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_ack(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	ppc_cached_irq_mask[n] &= ~mask;				\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	mtdcr(DCRN_UIC_SR(UIC##n), mask);				\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_end(unsigned int irq)			\
-{									\
-	unsigned int status = irq_desc[irq].status;			\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (status & IRQ_LEVEL) {					\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-		ACK_UIC##n##_PARENT					\
-	}								\
-	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {		\
-		ppc_cached_irq_mask[n] |= mask;				\
-		mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);	\
-	}								\
-}
-
-#define DECLARE_UIC(n)							\
-{									\
-	.typename 	= "UIC"#n,					\
-	.enable 	= ppc4xx_uic##n##_enable,			\
-	.disable 	= ppc4xx_uic##n##_disable,			\
-	.ack 		= ppc4xx_uic##n##_ack,				\
-	.end 		= ppc4xx_uic##n##_end,				\
-}									\
-
-#if NR_UICS == 4
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
-#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-UIC_HANDLERS(3);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uic0 & UIC0_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else if (uic0 & UIC0_UIC3NC)
-		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupts in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 3
-#define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uicb = mfdcr(DCRN_UIC_MSR(UICB));
-	if (uicb & UICB_UIC0NC)
-		return 32 - ffs(mfdcr(DCRN_UIC_MSR(UIC0)));
-	else if (uicb & UICB_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uicb & UICB_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else
-		return -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-#if defined(CONFIG_440GX)
-	/* Disable 440GP compatibility mode if it was enabled in firmware */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM);
-#endif
-	/* Configure Base UIC */
-	mtdcr(DCRN_UIC_CR(UICB), 0);
-	mtdcr(DCRN_UIC_TR(UICB), 0);
-	mtdcr(DCRN_UIC_PR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_SR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_ER(UICB), UICB_UIC0NC | UICB_UIC1NC | UICB_UIC2NC);
-}
-
-#elif NR_UICS == 2
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupt in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 1
-#define ACK_UIC0_PARENT
-UIC_HANDLERS(0);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static inline void ppc4xx_pic_impl_init(void)
-{
-}
-#endif
-
-static struct ppc4xx_uic_impl {
-	struct hw_interrupt_type decl;
-	int base;			/* Base DCR number */
-} __uic[] = {
-	{ .decl = DECLARE_UIC(0), .base = UIC0 },
-#if NR_UICS > 1
-	{ .decl = DECLARE_UIC(1), .base = UIC1 },
-#if NR_UICS > 2
-	{ .decl = DECLARE_UIC(2), .base = UIC2 },
-#if NR_UICS > 3
-	{ .decl = DECLARE_UIC(3), .base = UIC3 },
-#endif
-#endif
-#endif
-};
-
-static inline int is_level_sensitive(int irq)
-{
-	u32 tr = mfdcr(DCRN_UIC_TR(__uic[irq >> 5].base));
-	return (tr & IRQ_MASK_UICx(irq)) == 0;
-}
-
-void __init ppc4xx_pic_init(void)
-{
-	int i;
-	unsigned char *eirqs = ppc4xx_uic_ext_irq_cfg;
-
-	for (i = 0; i < NR_UICS; ++i) {
-		int base = __uic[i].base;
-
-		/* Disable everything by default */
-		ppc_cached_irq_mask[i] = 0;
-		mtdcr(DCRN_UIC_ER(base), 0);
-
-		/* We don't use critical interrupts */
-		mtdcr(DCRN_UIC_CR(base), 0);
-
-		/* Configure polarity and triggering */
-		if (ppc4xx_core_uic_cfg) {
-			struct ppc4xx_uic_settings *p = ppc4xx_core_uic_cfg + i;
-			u32 mask = p->ext_irq_mask;
-			u32 pr = mfdcr(DCRN_UIC_PR(base)) & mask;
-			u32 tr = mfdcr(DCRN_UIC_TR(base)) & mask;
-
-			/* "Fixed" interrupts (on-chip devices) */
-			pr |= p->polarity & ~mask;
-			tr |= p->triggering & ~mask;
-
-			/* Merge external IRQs settings if board port
-			 * provided them
-			 */
-			if (eirqs && mask) {
-				pr &= ~mask;
-				tr &= ~mask;
-				while (mask) {
-					/* Extract current external IRQ mask */
-					u32 eirq_mask = 1 << __ilog2(mask);
-
-					if (!(*eirqs & IRQ_SENSE_LEVEL))
-						tr |= eirq_mask;
-
-					if (*eirqs & IRQ_POLARITY_POSITIVE)
-						pr |= eirq_mask;
-
-					mask &= ~eirq_mask;
-					++eirqs;
-				}
-			}
-			mtdcr(DCRN_UIC_PR(base), pr);
-			mtdcr(DCRN_UIC_TR(base), tr);
-		}
-
-		/* ACK any pending interrupts to prevent false
-		 * triggering after first enable
-		 */
-		mtdcr(DCRN_UIC_SR(base), 0xffffffff);
-	}
-
-	/* Perform optional implementation specific setup
-	 * (e.g. enable cascade interrupts for multi-UIC configurations)
-	 */
-	ppc4xx_pic_impl_init();
-
-	/* Attach low-level handlers */
-	for (i = 0; i < (NR_UICS << 5); ++i) {
-		irq_desc[i].chip = &__uic[i >> 5].decl;
-		if (is_level_sensitive(i))
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	ppc_md.get_irq = ppc4xx_pic_get_irq;
-}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
deleted file mode 100644
index 353d746b47e1..000000000000
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *
- *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Completed implementation.
- *      Author: MontaVista Software, Inc.  <source@mvista.com>
- *              Frank Rowand <frank_rowand@mvista.com>
- *              Debbie Chu   <debbie_chu@mvista.com>
- *	Further modifications by Armin Kuster
- *
- *    Module name: ppc4xx_setup.c
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/initrd.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/kgdb.h>
-#include <asm/ibm4xx.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-
-#include <syslib/gen550.h>
-
-/* Function Prototypes */
-extern void abort(void);
-extern void ppc4xx_find_bridges(void);
-
-/* Global Variables */
-bd_t __res;
-
-void __init
-ppc4xx_setup_arch(void)
-{
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-
-	/* Setup PCI host bridges */
-#ifdef CONFIG_PCI
-	ppc4xx_find_bridges();
-#endif
-}
-
-/*
- *   This routine pretty-prints the platform's internal CPU clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-
-static int
-ppc4xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
-
-	return 0;
-}
-
-/*
- *   This routine pretty-prints the platform's internal bus clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-static int
-ppc4xx_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bip = &__res;
-
-	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
-	seq_printf(m, "plb bus clock\t: %ldMHz\n",
-		   (long) bip->bi_busfreq / 1000000);
-#ifdef CONFIG_PCI
-	seq_printf(m, "pci bus clock\t: %dMHz\n",
-		   bip->bi_pci_busfreq / 1000000);
-#endif
-
-	return 0;
-}
-
-/*
- * Return the virtual address representing the top of physical RAM.
- */
-static unsigned long __init
-ppc4xx_find_end_of_memory(void)
-{
-	return ((unsigned long) __res.bi_memsize);
-}
-
-void __init
-ppc4xx_map_io(void)
-{
-	io_block_mapping(PPC4xx_ONB_IO_VADDR,
-			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
-#ifdef CONFIG_PCI
-	io_block_mapping(PPC4xx_PCI_IO_VADDR,
-			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
-			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
-			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-ppc4xx_init_IRQ(void)
-{
-	ppc4xx_pic_init();
-}
-
-static void
-ppc4xx_restart(char *cmd)
-{
-	printk("%s\n", cmd);
-	abort();
-}
-
-static void
-ppc4xx_power_off(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-static void
-ppc4xx_halt(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-/*
- * This routine retrieves the internal processor frequency from the board
- * information structure, sets up the kernel timer decrementer based on
- * that value, enables the 4xx programmable interval timer (PIT) and sets
- * it up for auto-reload.
- */
-static void __init
-ppc4xx_calibrate_decr(void)
-{
-	unsigned int freq;
-	bd_t *bip = &__res;
-
-#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
-	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
-	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
-#endif
-	freq = bip->bi_tbfreq;
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero.
-	   ** At 200 Mhz, time base will rollover in ~2925 years.
-	 */
-
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
-	/* Set the PIT reload value and just let it run. */
-	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
-}
-
-TODC_ALLOC();
-
-/*
- * Input(s):
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	    unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	/* Initialize machine-dependent vectors */
-
-	ppc_md.setup_arch = ppc4xx_setup_arch;
-	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
-	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
-	ppc_md.init_IRQ = ppc4xx_init_IRQ;
-
-	ppc_md.restart = ppc4xx_restart;
-	ppc_md.power_off = ppc4xx_power_off;
-	ppc_md.halt = ppc4xx_halt;
-
-	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc4xx_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(DCRN_PLB0_BEAR)
-	printk("PLB0: BEAR= 0x%08x ACR=   0x%08x BESR=  0x%08x\n",
-	    mfdcr(DCRN_PLB0_BEAR), mfdcr(DCRN_PLB0_ACR),
-	    mfdcr(DCRN_PLB0_BESR));
-#endif
-#if defined(DCRN_POB0_BEAR)
-	printk("PLB0 to OPB: BEAR= 0x%08x BESR0= 0x%08x BESR1= 0x%08x\n",
-	    mfdcr(DCRN_POB0_BEAR), mfdcr(DCRN_POB0_BESR0),
-	    mfdcr(DCRN_POB0_BESR1));
-#endif
-
-}
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
deleted file mode 100644
index c4b369b50f9c..000000000000
--- a/arch/ppc/syslib/ppc4xx_sgdma.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * IBM PPC4xx DMA engine scatter/gather library
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_dma.h>
-
-void
-ppc4xx_set_sg_addr(int dmanr, phys_addr_t sg_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_sg_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_ASGH0 + (dmanr * 0x8), (u32)(sg_addr >> 32));
-#endif
-	mtdcr(DCRN_ASG0 + (dmanr * 0x8), (u32)sg_addr);
-}
-
-/*
- *   Add a new sgl descriptor to the end of a scatter/gather list
- *   which was created by alloc_dma_handle().
- *
- *   For a memory to memory transfer, both dma addresses must be
- *   valid. For a peripheral to memory transfer, one of the addresses
- *   must be set to NULL, depending on the direction of the transfer:
- *   memory to peripheral: set dst_addr to NULL,
- *   peripheral to memory: set src_addr to NULL.
- */
-int
-ppc4xx_add_dma_sgl(sgl_handle_t handle, phys_addr_t src_addr, phys_addr_t dst_addr,
-		   unsigned int count)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-
-	if (!handle) {
-		printk("ppc4xx_add_dma_sgl: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	}
-
-	if (psgl->dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_add_dma_sgl: bad channel: %d\n", psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		unsigned int aligned =
-		    (unsigned) src_addr | (unsigned) dst_addr | count;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (aligned & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (aligned & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (aligned & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_add_dma_sgl: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return DMA_STATUS_GENERAL_ERROR;
-		}
-		if (error)
-			printk
-			    ("Alignment warning: ppc4xx_add_dma_sgl src 0x%x dst 0x%x count 0x%x bus width var %d\n",
-			     src_addr, dst_addr, count, p_dma_ch->pwidth);
-
-	}
-#endif
-
-	if ((unsigned) (psgl->ptail + 1) >= ((unsigned) psgl + SGL_LIST_SIZE)) {
-		printk("sgl handle out of memory \n");
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	if (!psgl->ptail) {
-		psgl->phead = (ppc_sgl_t *)
-		    ((unsigned) psgl + sizeof (sgl_list_info_t));
-		psgl->phead_dma = psgl->dma_addr + sizeof(sgl_list_info_t);
-		psgl->ptail = psgl->phead;
-		psgl->ptail_dma = psgl->phead_dma;
-	} else {
-		if(p_dma_ch->int_on_final_sg) {
-			/* mask out all dma interrupts, except error, on tail
-			before adding new tail. */
-			psgl->ptail->control_count &=
-				~(SG_TCI_ENABLE | SG_ETI_ENABLE);
-		}
-		psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
-		psgl->ptail++;
-		psgl->ptail_dma += sizeof(ppc_sgl_t);
-	}
-
-	psgl->ptail->control = psgl->control;
-	psgl->ptail->src_addr = src_addr;
-	psgl->ptail->dst_addr = dst_addr;
-	psgl->ptail->control_count = (count >> p_dma_ch->shift) |
-	    psgl->sgl_control;
-	psgl->ptail->next = (uint32_t) NULL;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Enable (start) the DMA described by the sgl handle.
- */
-void
-ppc4xx_enable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	} else if (!psgl->phead) {
-		printk("ppc4xx_enable_dma_sgl: sg list empty\n");
-		return;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-	psgl->ptail->control_count &= ~SG_LINK;	/* make this the last dscrptr */
-	sg_command = mfdcr(DCRN_ASGC);
-
-	ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
-
-	sg_command |= SSG_ENABLE(psgl->dmanr);
-
-	mtdcr(DCRN_ASGC, sg_command);	/* start transfer */
-}
-
-/*
- * Halt an active scatter/gather DMA operation.
- */
-void
-ppc4xx_disable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command &= ~SSG_ENABLE(psgl->dmanr);
-	mtdcr(DCRN_ASGC, sg_command);	/* stop transfer */
-}
-
-/*
- *  Returns number of bytes left to be transferred from the entire sgl list.
- *  *src_addr and *dst_addr get set to the source/destination address of
- *  the sgl descriptor where the DMA stopped.
- *
- *  An sgl transfer must NOT be active when this function is called.
- */
-int
-ppc4xx_get_dma_sgl_residue(sgl_handle_t handle, phys_addr_t * src_addr,
-			   phys_addr_t * dst_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	ppc_sgl_t *pnext, *sgl_addr;
-	uint32_t count_left;
-
-	if (!handle) {
-		printk("ppc4xx_get_dma_sgl_residue: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_get_dma_sgl_residue: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
-	count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
-
-	if (!sgl_addr) {
-		printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
-		goto error;
-	}
-
-	pnext = psgl->phead;
-	while (pnext &&
-	       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE) &&
-		(pnext != sgl_addr))
-	    ) {
-		pnext++;
-	}
-
-	if (pnext == sgl_addr) {	/* found the sgl descriptor */
-
-		*src_addr = pnext->src_addr;
-		*dst_addr = pnext->dst_addr;
-
-		/*
-		 * Now search the remaining descriptors and add their count.
-		 * We already have the remaining count from this descriptor in
-		 * count_left.
-		 */
-		pnext++;
-
-		while ((pnext != psgl->ptail) &&
-		       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE))
-		    ) {
-			count_left += pnext->control_count & SG_COUNT_MASK;
-		}
-
-		if (pnext != psgl->ptail) {	/* should never happen */
-			printk
-			    ("ppc4xx_get_dma_sgl_residue error (1) psgl->ptail 0x%x handle 0x%x\n",
-			     (unsigned int) psgl->ptail, (unsigned int) handle);
-			goto error;
-		}
-
-		/* success */
-		p_dma_ch = &dma_channels[psgl->dmanr];
-		return (count_left << p_dma_ch->shift);	/* count in bytes */
-
-	} else {
-		/* this shouldn't happen */
-		printk
-		    ("get_dma_sgl_residue, unable to match current address 0x%x, handle 0x%x\n",
-		     (unsigned int) sgl_addr, (unsigned int) handle);
-
-	}
-
-      error:
-	*src_addr = (phys_addr_t) NULL;
-	*dst_addr = (phys_addr_t) NULL;
-	return 0;
-}
-
-/*
- * Returns the address(es) of the buffer(s) contained in the head element of
- * the scatter/gather list.  The element is removed from the scatter/gather
- * list and the next element becomes the head.
- *
- * This function should only be called when the DMA is not active.
- */
-int
-ppc4xx_delete_dma_sgl_element(sgl_handle_t handle, phys_addr_t * src_dma_addr,
-			      phys_addr_t * dst_dma_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_delete_sgl_element: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_delete_sgl_element: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!psgl->phead) {
-		printk("ppc4xx_delete_sgl_element: sgl list empty\n");
-		*src_dma_addr = (phys_addr_t) NULL;
-		*dst_dma_addr = (phys_addr_t) NULL;
-		return DMA_STATUS_SGL_LIST_EMPTY;
-	}
-
-	*src_dma_addr = (phys_addr_t) psgl->phead->src_addr;
-	*dst_dma_addr = (phys_addr_t) psgl->phead->dst_addr;
-
-	if (psgl->phead == psgl->ptail) {
-		/* last descriptor on the list */
-		psgl->phead = NULL;
-		psgl->ptail = NULL;
-	} else {
-		psgl->phead++;
-		psgl->phead_dma += sizeof(ppc_sgl_t);
-	}
-
-	return DMA_STATUS_GOOD;
-}
-
-
-/*
- *   Create a scatter/gather list handle.  This is simply a structure which
- *   describes a scatter/gather list.
- *
- *   A handle is returned in "handle" which the driver should save in order to
- *   be able to access this list later.  A chunk of memory will be allocated
- *   to be used by the API for internal management purposes, including managing
- *   the sg list and allocating memory for the sgl descriptors.  One page should
- *   be more than enough for that purpose.  Perhaps it's a bit wasteful to use
- *   a whole page for a single sg list, but most likely there will be only one
- *   sg list per channel.
- *
- *   Interrupt notes:
- *   Each sgl descriptor has a copy of the DMA control word which the DMA engine
- *   loads in the control register.  The control word has a "global" interrupt
- *   enable bit for that channel. Interrupts are further qualified by a few bits
- *   in the sgl descriptor count register.  In order to setup an sgl, we have to
- *   know ahead of time whether or not interrupts will be enabled at the completion
- *   of the transfers.  Thus, enable_dma_interrupt()/disable_dma_interrupt() MUST
- *   be called before calling alloc_dma_handle().  If the interrupt mode will never
- *   change after powerup, then enable_dma_interrupt()/disable_dma_interrupt()
- *   do not have to be called -- interrupts will be enabled or disabled based
- *   on how the channel was configured after powerup by the hw_init_dma_channel()
- *   function.  Each sgl descriptor will be setup to interrupt if an error occurs;
- *   however, only the last descriptor will be setup to interrupt. Thus, an
- *   interrupt will occur (if interrupts are enabled) only after the complete
- *   sgl transfer is done.
- */
-int
-ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode, unsigned int dmanr)
-{
-	sgl_list_info_t *psgl=NULL;
-	dma_addr_t dma_addr;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	uint32_t sg_command;
-	uint32_t ctc_settings;
-	void *ret;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_alloc_dma_handle: invalid channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!phandle) {
-		printk("ppc4xx_alloc_dma_handle: null handle pointer\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	/* Get a page of memory, which is zeroed out by consistent_alloc() */
-	ret = dma_alloc_coherent(NULL, DMA_PPC4xx_SIZE, &dma_addr, GFP_KERNEL);
-	if (ret != NULL) {
-		memset(ret, 0, DMA_PPC4xx_SIZE);
-		psgl = (sgl_list_info_t *) ret;
-	}
-
-	if (psgl == NULL) {
-		*phandle = (sgl_handle_t) NULL;
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	psgl->dma_addr = dma_addr;
-	psgl->dmanr = dmanr;
-
-	/*
-	 * Modify and save the control word. These words will be
-	 * written to each sgl descriptor.  The DMA engine then
-	 * loads this control word into the control register
-	 * every time it reads a new descriptor.
-	 */
-	psgl->control = p_dma_ch->control;
-	/* Clear all mode bits */
-	psgl->control &= ~(DMA_TM_MASK | DMA_TD);
-	/* Save control word and mode */
-	psgl->control |= (mode | DMA_CE_ENABLE);
-
-	/* In MM mode, we must set ETD/TCE */
-	if (mode == DMA_MODE_MM)
-		psgl->control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-
-	if (p_dma_ch->int_enable) {
-		/* Enable channel interrupt */
-		psgl->control |= DMA_CIE_ENABLE;
-	} else {
-		psgl->control &= ~DMA_CIE_ENABLE;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command |= SSG_MASK_ENABLE(dmanr);
-
-	/* Enable SGL control access */
-	mtdcr(DCRN_ASGC, sg_command);
-	psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
-
-	/* keep control count register settings */
-	ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
-		& (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
-	psgl->sgl_control |= ctc_settings;
-
-	if (p_dma_ch->int_enable) {
-		if (p_dma_ch->tce_enable)
-			psgl->sgl_control |= SG_TCI_ENABLE;
-		else
-			psgl->sgl_control |= SG_ETI_ENABLE;
-	}
-
-	*phandle = (sgl_handle_t) psgl;
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Destroy a scatter/gather list handle that was created by alloc_dma_handle().
- * The list must be empty (contain no elements).
- */
-void
-ppc4xx_free_dma_handle(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_free_dma_handle: got NULL\n");
-		return;
-	} else if (psgl->phead) {
-		printk("ppc4xx_free_dma_handle: list not empty\n");
-		return;
-	} else if (!psgl->dma_addr) {	/* should never happen */
-		printk("ppc4xx_free_dma_handle: no dma address\n");
-		return;
-	}
-
-	dma_free_coherent(NULL, DMA_PPC4xx_SIZE, (void *) psgl, 0);
-}
-
-EXPORT_SYMBOL(ppc4xx_alloc_dma_handle);
-EXPORT_SYMBOL(ppc4xx_free_dma_handle);
-EXPORT_SYMBOL(ppc4xx_add_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_delete_dma_sgl_element);
-EXPORT_SYMBOL(ppc4xx_enable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_disable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_get_dma_sgl_residue);
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
deleted file mode 100644
index bce9a75c80e3..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ /dev/null
@@ -1,126 +0,0 @@
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "ppc8xx_pic.h"
-
-extern int cpm_get_irq(void);
-
-/* The 8xx internal interrupt controller.  It is usually
- * the only interrupt controller.  Some boards, like the MBX and
- * Sandpoint have the 8259 as a secondary controller.  Depending
- * upon the processor type, the internal controller can have as
- * few as 16 interrupts or as many as 64.  We could use  the
- * "clear_bit()" and "set_bit()" functions like other platforms,
- * but they are overkill for us.
- */
-
-static void m8xx_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-		int bit, word;
-
-		bit = irq_nr & 0x1f;
-		word = irq_nr >> 5;
-
-		ppc_cached_irq_mask[word] |= (1 << (31-bit));
-		out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	}
-}
-
-
-static void m8xx_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
-}
-
-struct hw_interrupt_type ppc8xx_pic = {
-	.typename = " 8xx SIU  ",
-	.enable = m8xx_unmask_irq,
-	.disable = m8xx_mask_irq,
-	.ack = m8xx_mask_and_ack,
-	.end = m8xx_end_irq,
-};
-
-/*
- * We either return a valid interrupt or -1 if there is nothing pending
- */
-int
-m8xx_get_irq(struct pt_regs *regs)
-{
-	int irq;
-
-	/* For MPC8xx, read the SIVEC register and shift the bits down
-	 * to get the irq number.
-	 */
-	irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
-
-	/*
-	 * When we read the sivec without an interrupt to process, we will
-	 * get back SIU_LEVEL7.  In this case, return -1
-	 */
-        if (irq == CPM_INTERRUPT)
-        	irq = CPM_IRQ_OFFSET + cpm_get_irq();
-#if defined(CONFIG_PCI)
-	else if (irq == ISA_BRIDGE_INT) {
-		int isa_irq;
-
-		if ((isa_irq = i8259_poll(regs)) >= 0)
-			irq = I8259_IRQ_OFFSET + isa_irq;
-	}
-#endif	/* CONFIG_PCI */
-	else if (irq == SIU_LEVEL7)
-		irq = -1;
-
-	return irq;
-}
-
-#if defined(CONFIG_MBX) && defined(CONFIG_PCI)
-/* Only the MBX uses the external 8259.  This allows us to catch standard
- * drivers that may mess up the internal interrupt controllers, and also
- * allow them to run without modification on the MBX.
- */
-void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the 8259 cascade interrupt in the SIU
-	 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
-	 */
-}
-#endif	/* CONFIG_PCI */
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h
deleted file mode 100644
index 53bcd97ef7f5..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _PPC_KERNEL_PPC8xx_H
-#define _PPC_KERNEL_PPC8xx_H
-
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-extern struct hw_interrupt_type ppc8xx_pic;
-
-void m8xx_do_IRQ(struct pt_regs *regs,
-                 int            cpu);
-int m8xx_get_irq(struct pt_regs *regs);
-
-#ifdef CONFIG_MBX
-#include <asm/i8259.h>
-#include <asm/io.h>
-void mbx_i8259_action(int cpl, void *dev_id, struct pt_regs *regs);
-#endif
-
-#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
deleted file mode 100644
index 837183c24dfc..000000000000
--- a/arch/ppc/syslib/ppc_sys.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * PPC System library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/ppc_sys.h>
-
-int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-static int ppc_sys_inited;
-static int ppc_sys_func_inited;
-
-static const char *ppc_sys_func_names[] = {
-	[PPC_SYS_FUNC_DUMMY] = "dummy",
-	[PPC_SYS_FUNC_ETH] = "eth",
-	[PPC_SYS_FUNC_UART] = "uart",
-	[PPC_SYS_FUNC_HLDC] = "hldc",
-	[PPC_SYS_FUNC_USB] = "usb",
-	[PPC_SYS_FUNC_IRDA] = "irda",
-};
-
-void __init identify_ppc_sys_by_id(u32 id)
-{
-	unsigned int i = 0;
-	while (1) {
-		if ((ppc_sys_specs[i].mask & id) == ppc_sys_specs[i].value)
-			break;
-		i++;
-	}
-
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-void __init identify_ppc_sys_by_name(char *name)
-{
-	unsigned int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			break;
-		i++;
-	}
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-static int __init count_sys_specs(void)
-{
-	int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0])
-		i++;
-	return i;
-}
-
-static int __init find_chip_by_name_and_id(char *name, u32 id)
-{
-	int ret = -1;
-	unsigned int i = 0;
-	unsigned int j = 0;
-	unsigned int dups = 0;
-
-	unsigned char matched[count_sys_specs()];
-
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			matched[j++] = i;
-		i++;
-	}
-
-	ret = i;
-
-	if (j != 0) {
-		for (i = 0; i < j; i++) {
-			if ((ppc_sys_specs[matched[i]].mask & id) ==
-			    ppc_sys_specs[matched[i]].value) {
-				ret = matched[i];
-				dups++;
-			}
-		}
-		ret = (dups == 1) ? ret : (-1 * dups);
-	}
-	return ret;
-}
-
-void __init identify_ppc_sys_by_name_and_id(char *name, u32 id)
-{
-	int i = find_chip_by_name_and_id(name, id);
-	BUG_ON(i < 0);
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-}
-
-/* Update all memory resources by paddr, call before platform_device_register */
-void __init
-ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
-{
-	int i;
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-		if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && 
-			((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
-			r->start += paddr;
-			r->end += paddr;
-			r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
-		}
-	}
-}
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-void *__init ppc_sys_get_pdata(enum ppc_sys_devices dev)
-{
-	return ppc_sys_platform_devices[dev].dev.platform_data;
-}
-
-void ppc_sys_device_remove(enum ppc_sys_devices dev)
-{
-	unsigned int i;
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	} else {
-		if (cur_ppc_sys_spec == NULL)
-			return;
-		for (i = 0; i < cur_ppc_sys_spec->num_devices; i++)
-			if (cur_ppc_sys_spec->device_list[i] == dev)
-				cur_ppc_sys_spec->device_list[i] = -1;
-	}
-}
-
-/* Platform-notify mapping
- * Helper function for BSP code to assign board-specific platfom-divice bits
- */
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
-			 struct device *dev)
-{
-	struct platform_device *pdev;
-	int len, idx;
-	const char *s;
-
-	/* do nothing if no device or no bus_id */
-	if (!dev || !dev->bus_id)
-		return;
-
-	/* call per device map */
-	while (map->bus_id != NULL) {
-		idx = -1;
-		s = strrchr(dev->bus_id, '.');
-		if (s != NULL) {
-			idx = (int)simple_strtol(s + 1, NULL, 10);
-			len = s - dev->bus_id;
-		} else {
-			s = dev->bus_id;
-			len = strlen(dev->bus_id);
-		}
-
-		if (!strncmp(dev->bus_id, map->bus_id, len)) {
-			pdev = container_of(dev, struct platform_device, dev);
-			map->rtn(pdev, idx);
-		}
-		map++;
-	}
-}
-
-/*
-   Function assignment stuff.
- Intended to work as follows:
- the device name defined in foo_devices.c will be concatenated with :"func",
- where func is string map of respective function from platfom_device_func enum
-
- The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear
- in platform bus with unmodified name.
- */
-
-/*
-   Here we'll replace .name pointers with fixed-length strings
-   Hereby, this should be called *before* any func stuff triggeded.
- */
-void ppc_sys_device_initfunc(void)
-{
-	int i;
-	const char *name;
-	static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE];
-	enum ppc_sys_devices cur_dev;
-
-	/* If inited yet, do nothing */
-	if (ppc_sys_func_inited)
-		return;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0)
-			continue;
-
-		if (ppc_sys_platform_devices[cur_dev].name) {
-			/*backup name */
-			name = ppc_sys_platform_devices[cur_dev].name;
-			strlcpy(new_names[i], name, BUS_ID_SIZE);
-			ppc_sys_platform_devices[cur_dev].name = new_names[i];
-		}
-	}
-
-	ppc_sys_func_inited = 1;
-}
-
-/*The "engine" of the func stuff. Here we either concat specified function string description
- to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
-			    enum platform_device_func func)
-{
-	char *s;
-	char *name = (char *)ppc_sys_platform_devices[dev].name;
-	char tmp[BUS_ID_SIZE];
-
-	if (!ppc_sys_func_inited) {
-		printk(KERN_ERR "Unable to alter function - not inited!\n");
-		return;
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	}
-
-	if ((s = (char *)strchr(name, ':')) != NULL) {	/* reassign */
-		/* Either change the name after ':' or remove func modifications */
-		if (func != PPC_SYS_FUNC_DUMMY)
-			strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE);
-		else
-			*s = 0;
-	} else if (func != PPC_SYS_FUNC_DUMMY) {
-		/* do assignment if it is not just "clear"  request */
-		sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]);
-		strlcpy(name, tmp, BUS_ID_SIZE);
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_register(&ppc_sys_platform_devices[dev]);
-	}
-}
-
-void ppc_sys_device_disable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is enabled*/
-	if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) {
-		if (ppc_sys_inited) {
-			platform_device_unregister(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED;
-	}
-}
-
-void ppc_sys_device_enable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is disabled*/
-	if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) {
-		if (ppc_sys_inited) {
-			platform_device_register(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED;
-	}
-
-}
-
-void ppc_sys_device_enable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_enable(cur_dev);
-	}
-}
-
-void ppc_sys_device_disable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_disable(cur_dev);
-	}
-}
-
-
-static int __init ppc_sys_init(void)
-{
-	unsigned int i, dev_id, ret = 0;
-
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		dev_id = cur_ppc_sys_spec->device_list[i];
-		if ((dev_id != -1) &&
-		!(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) {
-			if (ppc_sys_device_fixup != NULL)
-				ppc_sys_device_fixup(&ppc_sys_platform_devices
-						     [dev_id]);
-			if (platform_device_register
-			    (&ppc_sys_platform_devices[dev_id])) {
-				ret = 1;
-				printk(KERN_ERR
-				       "unable to register device %d\n",
-				       dev_id);
-			}
-		}
-	}
-
-	ppc_sys_inited = 1;
-	return ret;
-}
-
-subsys_initcall(ppc_sys_init);
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
deleted file mode 100644
index fefbc217a56d..000000000000
--- a/arch/ppc/syslib/pq2_devices.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * PQ2 Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC82xx_CPM_FCC1] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11300,
-				.end	= 0x1131f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8400,
-				.end	= 0x84ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC1,
-				.end	= SIU_INT_FCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC2] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11320,
-				.end	= 0x1133f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8500,
-				.end	= 0x85ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC2,
-				.end	= SIU_INT_FCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC3] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11340,
-				.end	= 0x1135f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8600,
-				.end	= 0x86ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC3,
-				.end	= SIU_INT_FCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_I2C] = {
-		.name = "fsl-cpm-i2c",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "i2c_mem",
-				.start	= 0x11860,
-				.end	= 0x118BF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "i2c_pram",
-				.start 	= 0x8afc,
-				.end	= 0x8afd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_I2C,
-				.end	= SIU_INT_I2C,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A00,
-				.end	= 0x11A1F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8000,
-				.end	= 0x80ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC1,
-				.end	= SIU_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A20,
-				.end	= 0x11A3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8100,
-				.end	= 0x81ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC2,
-				.end	= SIU_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name 	= "regs",
-				.start	= 0x11A40,
-				.end	= 0x11A5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8200,
-				.end	= 0x82ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC3,
-				.end	= SIU_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A60,
-				.end	= 0x11A7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8300,
-				.end	= 0x83ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC4,
-				.end	= SIU_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SPI] = {
-		.name = "fsl-cpm-spi",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "spi_mem",
-				.start	= 0x11AA0,
-				.end	= 0x11AFF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "spi_pram",
-				.start	= 0x89fc,
-				.end	= 0x89fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SPI,
-				.end	= SIU_INT_SPI,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC1] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B30,
-				.end	= 0x11B3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8700,
-				.end	= 0x877f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC1,
-				.end	= SIU_INT_MCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC2] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B50,
-				.end	= 0x11B5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8800,
-				.end	= 0x887f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC2,
-				.end	= SIU_INT_MCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A80,
-				.end	= 0x11A8F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x87fc,
-				.end	= 0x87fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC1,
-				.end	= SIU_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A90,
-				.end	= 0x11A9F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x88fc,
-				.end	= 0x88fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC2,
-				.end	= SIU_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_USB] = {
-		.name = "fsl-cpm-usb",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "usb_mem",
-				.start	= 0x11b60,
-				.end	= 0x11b78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "usb_pram",
-				.start	= 0x8b00,
-				.end	= 0x8bff,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_USB,
-				.end	= SIU_INT_USB,
-				.flags	= IORESOURCE_IRQ,
-			},
-
-		},
-	},
-	[MPC82xx_SEC1] = {
-		.name = "fsl-sec",
-		.id = 1,
-		.num_resources = 1,
-		.resource = (struct resource[]) {
-			{
-				.name	= "sec_mem",
-				.start	= 0x40000,
-				.end	= 0x52fff,
-				.flags	= IORESOURCE_MEM,
-			},
-		},
-	},
-	[MPC82xx_MDIO_BB] = {
-		.name = "fsl-bb-mdio",
-		.id = 0,
-		.num_resources = 0,
-	},
-};
-
-static int __init mach_mpc82xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc82xx_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("mach_mpc82xx_init:enter", 0);
-	ppc_sys_device_fixup = mach_mpc82xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc82xx_init);
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
deleted file mode 100644
index 9c85300846c7..000000000000
--- a/arch/ppc/syslib/pq2_sys.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * PQ2 System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	/* below is a list of the 8260 family of processors */
-	{
-		.ppc_sys_name	= "8250",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8255",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 11,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
-			MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8260",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8264",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8265",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8266",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	/* below is a list of the 8272 family of processors */
-	{
-		.ppc_sys_name	= "8247",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8248",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-		},
-	},
-	{
-		.ppc_sys_name	= "8271",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8272",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-			MPC82xx_MDIO_BB,
-		},
-	},
-	/* below is a list of the 8280 family of processors */
-	{
-		.ppc_sys_name	= "8270",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8275",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8280",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
deleted file mode 100644
index 474dccbc4a8a..000000000000
--- a/arch/ppc/syslib/prep_nvram.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1998  Corey Minyard
- *
- * This reads the NvRAM on PReP compliant machines (generally from IBM or
- * Motorola).  Motorola kept the format of NvRAM in their ROM, PPCBUG, the
- * same, long after they had stopped producing PReP compliant machines.  So
- * this code is useful in those cases as well.
- *
- */
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-
-static char nvramData[MAX_PREP_NVRAM];
-static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
-
-unsigned char prep_nvram_read_val(int addr)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-	return inb(PREP_NVRAM_DATA);
-}
-
-void prep_nvram_write_val(int           addr,
-			  unsigned char val)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-   	outb(val, PREP_NVRAM_DATA);
-}
-
-void __init init_prep_nvram(void)
-{
-	unsigned char *nvp;
-	int  i;
-	int  nvramSize;
-
-	/*
-	 * The following could fail if the NvRAM were corrupt but
-	 * we expect the boot firmware to have checked its checksum
-	 * before boot
-	 */
-	nvp = (char *) &nvram->Header;
-	for (i=0; i<sizeof(HEADER); i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-
-	/*
-	 * The PReP NvRAM may be any size so read in the header to
-	 * determine how much we must read in order to get the complete
-	 * GE area
-	 */
-	nvramSize=(int)nvram->Header.GEAddress+nvram->Header.GELength;
-	if(nvramSize>MAX_PREP_NVRAM)
-	{
-		/*
-		 * NvRAM is too large
-		 */
-		nvram->Header.GELength=0;
-		return;
-	}
-
-	/*
-	 * Read the remainder of the PReP NvRAM
-	 */
-	nvp = (char *) &nvram->GEArea[0];
-	for (i=sizeof(HEADER); i<nvramSize; i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-}
-
-char *prep_nvram_get_var(const char *name)
-{
-	char *cp;
-	int  namelen;
-
-	namelen = strlen(name);
-	cp = prep_nvram_first_var();
-	while (cp != NULL) {
-		if ((strncmp(name, cp, namelen) == 0)
-		    && (cp[namelen] == '='))
-		{
-			return cp+namelen+1;
-		}
-		cp = prep_nvram_next_var(cp);
-	}
-
-	return NULL;
-}
-
-char *prep_nvram_first_var(void)
-{
-        if (nvram->Header.GELength == 0) {
-		return NULL;
-	} else {
-		return (((char *)nvram)
-			+ ((unsigned int) nvram->Header.GEAddress));
-	}
-}
-
-char *prep_nvram_next_var(char *name)
-{
-	char *cp;
-
-
-	cp = name;
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp != '\0'))
-	{
-		cp++;
-	}
-
-	/* Skip over any null characters. */
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp == '\0'))
-	{
-		cp++;
-	}
-
-	if ((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength) {
-		return cp;
-	} else {
-		return NULL;
-	}
-}
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c
deleted file mode 100644
index 7a97c7440b30..000000000000
--- a/arch/ppc/syslib/qspan_pci.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * QSpan pci routines.
- * Most 8xx boards use the QSpan PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- *
- * The RPX Classic implementation shares a chip select for normal
- * PCI access and QSpan control register addresses.  The selection is
- * further selected by a bit setting in a board control register.
- * Although it should happen, we disable interrupts during this operation
- * to make sure some driver doesn't accidentally access the PCI while
- * we have switched the chip select.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/mpc8xx.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-/*
- * This blows......
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_qspan_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr) : " %0")
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-static DEFINE_SPINLOCK(pcibios_lock);
-
-int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
-			     unsigned short index, unsigned char *bus_ptr,
-			     unsigned char *dev_fn_ptr)
-{
-    int num, devfn;
-    unsigned int x, vendev;
-
-    if (vendor == 0xffff)
-	return PCIBIOS_BAD_VENDOR_ID;
-    vendev = (dev_id << 16) + vendor;
-    num = 0;
-    for (devfn = 0;  devfn < 32;  devfn++) {
-	qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
-	if (x == vendev) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devfn<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
-			    unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
-{
-    int devnr, x, num;
-
-    num = 0;
-    for (devnr = 0;  devnr < 32;  devnr++) {
-	qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
-	if ((x>>8) == class_code) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devnr<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-void __init
-m8xx_pcibios_fixup(void)
-{
-   /* Lots to do here, all board and configuration specific. */
-}
-
-void __init
-m8xx_setup_pci_ptrs(void)
-{
-	set_config_access_method(qspan);
-
-	ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
-}
-
diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c
deleted file mode 100644
index a8168b8e5683..000000000000
--- a/arch/ppc/syslib/todc_time.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/*
- * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
- * Real Time Clocks/Timekeepers.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-/*
- * Depending on the hardware on your board and your board design, the
- * RTC/NVRAM may be accessed either directly (like normal memory) or via
- * address/data registers.  If your board uses the direct method, set
- * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
- * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
- * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
- * address of the upper byte (leave NULL if using mc146818), and set
- * 'nvram_data' to the address of the 8-bit data register.
- *
- * In order to break the assumption that the RTC and NVRAM are accessed by
- * the same mechanism, you need to explicitly set 'ppc_md.rtc_read_val' and
- * 'ppc_md.rtc_write_val', otherwise the values of 'ppc_md.rtc_read_val'
- * and 'ppc_md.rtc_write_val' will be used.
- *
- * Note: Even though the documentation for the various RTC chips say that it
- * 	 take up to a second before it starts updating once the 'R' bit is
- * 	 cleared, they always seem to update even though we bang on it many
- * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
- * 	 (possibly others).  Those chips seem to have a real problem whenever
- * 	 we set the 'R' bit before reading them, they basically stop counting.
- * 	 					--MAG
- */
-
-/*
- * 'todc_info' should be initialized in your *_setup.c file to
- * point to a fully initialized 'todc_info_t' structure.
- * This structure holds all the register offsets for your particular
- * TODC/RTC chip.
- * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
- */
-
-#ifdef	RTC_FREQ_SELECT
-#undef	RTC_FREQ_SELECT
-#define	RTC_FREQ_SELECT		control_b	/* Register A */
-#endif
-
-#ifdef	RTC_CONTROL
-#undef	RTC_CONTROL
-#define	RTC_CONTROL		control_a	/* Register B */
-#endif
-
-#ifdef	RTC_INTR_FLAGS
-#undef	RTC_INTR_FLAGS
-#define	RTC_INTR_FLAGS		watchdog	/* Register C */
-#endif
-
-#ifdef	RTC_VALID
-#undef	RTC_VALID
-#define	RTC_VALID		interrupts	/* Register D */
-#endif
-
-/* Access routines when RTC accessed directly (like normal memory) */
-u_char
-todc_direct_read_val(int addr)
-{
-	return readb((void __iomem *)(todc_info->nvram_data + addr));
-}
-
-void
-todc_direct_write_val(int addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
-	return;
-}
-
-/* Access routines for accessing m48txx type chips via addr/data regs */
-u_char
-todc_m48txx_read_val(int addr)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	return inb(todc_info->nvram_data);
-}
-
-void
-todc_m48txx_write_val(int addr, unsigned char val)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-   	outb(val, todc_info->nvram_data);
-	return;
-}
-
-/* Access routines for accessing mc146818 type chips via addr/data regs */
-u_char
-todc_mc146818_read_val(int addr)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	return inb_p(todc_info->nvram_data);
-}
-
-void
-todc_mc146818_write_val(int addr, unsigned char val)
-{
-	outb_p(addr, todc_info->nvram_as0);
-   	outb_p(val, todc_info->nvram_data);
-}
-
-
-/*
- * Routines to make RTC chips with NVRAM buried behind an addr/data pair
- * have the NVRAM and clock regs appear at the same level.
- * The NVRAM will appear to start at addr 0 and the clock regs will appear
- * to start immediately after the NVRAM (actually, start at offset
- * todc_info->nvram_size).
- */
-static inline u_char
-todc_read_val(int addr)
-{
-	u_char	val;
-
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			val = ppc_md.rtc_read_val(addr);
-		}
-	}
-	else {
-		val = ppc_md.rtc_read_val(addr);
-	}
-
-	return val;
-}
-
-static inline void
-todc_write_val(int addr, u_char val)
-{
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			ppc_md.rtc_write_val(addr, val);
-		}
-	}
-	else {
-		ppc_md.rtc_write_val(addr, val);
-	}
-}
-
-/*
- * TODC routines
- *
- * There is some ugly stuff in that there are assumptions for the mc146818.
- *
- * Assumptions:
- *	- todc_info->control_a has the offset as mc146818 Register B reg
- *	- todc_info->control_b has the offset as mc146818 Register A reg
- *	- m48txx control reg's write enable or 'W' bit is same as
- *	  mc146818 Register B 'SET' bit (i.e., 0x80)
- *
- * These assumptions were made to make the code simpler.
- */
-long __init
-todc_time_init(void)
-{
-	u_char	cntl_b;
-
-	if (!ppc_md.rtc_read_val)
-		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
-	if (!ppc_md.rtc_write_val)
-		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
-	
-	cntl_b = todc_read_val(todc_info->control_b);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		if ((cntl_b & 0x70) != 0x20) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			cntl_b &= ~0x70;
-			cntl_b |= 0x20;
-		}
-
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
-		u_char mode;
-
-		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
-		/* Make sure countdown clear is not set */
-		mode &= ~0x40;
-		/* Enable oscillator, extended register set */
-		mode |= 0x30;
-		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
-
-	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
-		u_char	month;
-
-		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
-		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
-
-		month = todc_read_val(todc_info->month);
-
-		if ((month & 0x80) == 0x80) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			month &= ~0x80;
-			todc_write_val(todc_info->month, month);
-		}
-
-		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else { /* must be a m48txx type */
-		u_char	cntl_a;
-
-		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
-		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
-
-		cntl_a = todc_read_val(todc_info->control_a);
-
-		/* Check & clear STOP bit in control B register */
-		if (cntl_b & TODC_MK48TXX_DAY_CB) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-
-			cntl_a |= todc_info->enable_write;
-			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
-
-			todc_write_val(todc_info->control_a, cntl_a);
-			todc_write_val(todc_info->control_b, cntl_b);
-		}
-
-		/* Make sure READ & WRITE bits are cleared. */
-		cntl_a &= ~(todc_info->enable_write |
-			    todc_info->enable_read);
-		todc_write_val(todc_info->control_a, cntl_a);
-	}
-
-	return 0;
-}
-
-/*
- * There is some ugly stuff in that there are assumptions that for a mc146818,
- * the todc_info->control_a has the offset of the mc146818 Register B reg and
- * that the register'ss 'SET' bit is the same as the m48txx's write enable
- * bit in the control register of the m48txx (i.e., 0x80).
- *
- * It was done to make the code look simpler.
- */
-ulong
-todc_get_rtc_time(void)
-{
-	uint	year = 0, mon = 0, day = 0, hour = 0, min = 0, sec = 0;
-	uint	limit, i;
-	u_char	save_control, uip = 0;
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		limit = 1;
-
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-		}
-	}
-	else {
-		limit = 100000000;
-	}
-
-	for (i=0; i<limit; i++) {
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		}
-
-		sec = todc_read_val(todc_info->seconds) & 0x7f;
-		min = todc_read_val(todc_info->minutes) & 0x7f;
-		hour = todc_read_val(todc_info->hours) & 0x3f;
-		day = todc_read_val(todc_info->day_of_month) & 0x3f;
-		mon = todc_read_val(todc_info->month) & 0x1f;
-		year = todc_read_val(todc_info->year) & 0xff;
-
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
-			if ((uip & RTC_UIP) == 0) break;
-		}
-	}
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				save_control &= ~(todc_info->enable_read);
-				todc_write_val(todc_info->control_a,
-						       save_control);
-		}
-	}
-	spin_unlock(&rtc_lock);
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	year = year + 1900;
-	if (year < 1970) {
-		year += 100;
-	}
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-int
-todc_set_rtc_time(unsigned long nowtime)
-{
-	struct rtc_time	tm;
-	u_char		save_control, save_freq_select = 0;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = todc_read_val(todc_info->control_a);
-
-	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
-	todc_write_val(todc_info->control_a,
-			       (save_control | todc_info->enable_write));
-	save_control &= ~(todc_info->enable_write); /* in case it was set */
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		todc_write_val(todc_info->RTC_FREQ_SELECT,
-				       save_freq_select | RTC_DIV_RESET2);
-	}
-
-
-        tm.tm_year = (tm.tm_year - 1900) % 100;
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-
-	todc_write_val(todc_info->seconds,      tm.tm_sec);
-	todc_write_val(todc_info->minutes,      tm.tm_min);
-	todc_write_val(todc_info->hours,        tm.tm_hour);
-	todc_write_val(todc_info->month,        tm.tm_mon);
-	todc_write_val(todc_info->day_of_month, tm.tm_mday);
-	todc_write_val(todc_info->year,         tm.tm_year);
-
-	todc_write_val(todc_info->control_a, save_control);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
-	}
-	spin_unlock(&rtc_lock);
-
-	return 0;
-}
-
-/*
- * Manipulates read bit to reliably read seconds at a high rate.
- */
-static unsigned char __init todc_read_timereg(int addr)
-{
-	unsigned char save_control = 0, val;
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control = todc_read_val(todc_info->control_a);
-			todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-	}
-	val = todc_read_val(addr);
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control &= ~(todc_info->enable_read);
-			todc_write_val(todc_info->control_a, save_control);
-	}
-
-	return val;
-}
-
-/*
- * This was taken from prep_setup.c
- * Use the NVRAM RTC to time a second to calibrate the decrementer.
- */
-void __init
-todc_calibrate_decr(void)
-{
-	ulong	freq;
-	ulong	tbl, tbu;
-        long	i, loop_count;
-        u_char	sec;
-
-	todc_time_init();
-
-	/*
-	 * Actually this is bad for precision, we should have a loop in
-	 * which we only read the seconds counter. todc_read_val writes
-	 * the address bytes on every call and this takes a lot of time.
-	 * Perhaps an nvram_wait_change method returning a time
-	 * stamp with a loop count as parameter would be the solution.
-	 */
-	/*
-	 * Need to make sure the tbl doesn't roll over so if tbu increments
-	 * during this test, we need to do it again.
-	 */
-	loop_count = 0;
-
-	sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-	do {
-		tbu = get_tbu();
-
-		for (i = 0 ; i < 10000000 ; i++) {/* may take up to 1 second */
-		   tbl = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-		for (i = 0 ; i < 10000000 ; i++) { /* Should take 1 second */
-		   freq = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		freq -= tbl;
-	} while ((get_tbu() != tbu) && (++loop_count < 2));
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
deleted file mode 100644
index 7322781be1c6..000000000000
--- a/arch/ppc/syslib/virtex_devices.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Virtex hard ppc405 core common device listing
- *
- * Copyright 2005-2007 Secret Lab Technologies Ltd.
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2002-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/io.h>
-
-/*
- * UARTLITE: shortcut macro for single instance
- */
-#define XPAR_UARTLITE(num) { \
-	.name = "uartlite", \
-	.id = num, \
-	.num_resources = 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
-			.end = XPAR_UARTLITE_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * Full UART: shortcut macro for single instance + platform data structure
- */
-#define XPAR_UART(num) { \
-	.mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
-	.irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
-	.iotype = UPIO_MEM, \
-	.uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
-	.flags = UPF_BOOT_AUTOCONF, \
-	.regshift = 2, \
-}
-
-/*
- * SystemACE: shortcut macro for single instance
- */
-#define XPAR_SYSACE(num) { \
-	.name		= "xsysace", \
-	.id		= XPAR_SYSACE_##num##_DEVICE_ID, \
-	.num_resources	= 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start	= XPAR_SYSACE_##num##_BASEADDR, \
-			.end	= XPAR_SYSACE_##num##_HIGHADDR, \
-			.flags	= IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start	= XPAR_INTC_0_SYSACE_##num##_VEC_ID, \
-			.flags	= IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * ML300/ML403 Video Device: shortcut macro for single instance
- */
-#define XPAR_TFT(num) { \
-	.name = "xilinxfb", \
-	.id = num, \
-	.num_resources = 1, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_TFT_##num##_BASEADDR, \
-			.end = XPAR_TFT_##num##_BASEADDR+7, \
-			.flags = IORESOURCE_IO, \
-		}, \
-	}, \
-}
-
-#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
-	.name = "ml403_ac97cr", \
-	.id = num, \
-	.num_resources = 3, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
-			.end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/* UART 8250 driver platform data table */
-struct plat_serial8250_port virtex_serial_platform_data[] = {
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	XPAR_UART(0),
-#endif
-#if defined(XPAR_UARTNS550_1_BASEADDR)
-	XPAR_UART(1),
-#endif
-#if defined(XPAR_UARTNS550_2_BASEADDR)
-	XPAR_UART(2),
-#endif
-#if defined(XPAR_UARTNS550_3_BASEADDR)
-	XPAR_UART(3),
-#endif
-#if defined(XPAR_UARTNS550_4_BASEADDR)
-	XPAR_UART(4),
-#endif
-#if defined(XPAR_UARTNS550_5_BASEADDR)
-	XPAR_UART(5),
-#endif
-#if defined(XPAR_UARTNS550_6_BASEADDR)
-	XPAR_UART(6),
-#endif
-#if defined(XPAR_UARTNS550_7_BASEADDR)
-	XPAR_UART(7),
-#endif
-	{ }, /* terminated by empty record */
-};
-
-
-struct platform_device virtex_platform_devices[] = {
-	/* UARTLITE instances */
-#if defined(XPAR_UARTLITE_0_BASEADDR)
-	XPAR_UARTLITE(0),
-#endif
-#if defined(XPAR_UARTLITE_1_BASEADDR)
-	XPAR_UARTLITE(1),
-#endif
-#if defined(XPAR_UARTLITE_2_BASEADDR)
-	XPAR_UARTLITE(2),
-#endif
-#if defined(XPAR_UARTLITE_3_BASEADDR)
-	XPAR_UARTLITE(3),
-#endif
-#if defined(XPAR_UARTLITE_4_BASEADDR)
-	XPAR_UARTLITE(4),
-#endif
-#if defined(XPAR_UARTLITE_5_BASEADDR)
-	XPAR_UARTLITE(5),
-#endif
-#if defined(XPAR_UARTLITE_6_BASEADDR)
-	XPAR_UARTLITE(6),
-#endif
-#if defined(XPAR_UARTLITE_7_BASEADDR)
-	XPAR_UARTLITE(7),
-#endif
-
-	/* Full UART instances */
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	{
-		.name		= "serial8250",
-		.id		= 0,
-		.dev.platform_data = virtex_serial_platform_data,
-	},
-#endif
-
-	/* SystemACE instances */
-#if defined(XPAR_SYSACE_0_BASEADDR)
-	XPAR_SYSACE(0),
-#endif
-#if defined(XPAR_SYSACE_1_BASEADDR)
-	XPAR_SYSACE(1),
-#endif
-
-#if defined(XPAR_TFT_0_BASEADDR)
-	XPAR_TFT(0),
-#endif
-#if defined(XPAR_TFT_1_BASEADDR)
-	XPAR_TFT(1),
-#endif
-#if defined(XPAR_TFT_2_BASEADDR)
-	XPAR_TFT(2),
-#endif
-#if defined(XPAR_TFT_3_BASEADDR)
-	XPAR_TFT(3),
-#endif
-
-	/* AC97 Controller Reference instances */
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(0),
-#endif
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(1),
-#endif
-};
-
-/* Early serial support functions */
-static void __init
-virtex_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-virtex_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = virtex_serial_platform_data;
-	while(pdata && pdata->flags) {
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		virtex_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
-/*
- * default fixup routine; do nothing and return success.
- *
- * Reimplement this routine in your custom board support file to
- * override the default behaviour
- */
-int __attribute__ ((weak))
-virtex_device_fixup(struct platform_device *dev)
-{
-	return 0;
-}
-
-static int __init virtex_init(void)
-{
-	struct platform_device *index = virtex_platform_devices;
-	unsigned int ret = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) {
-		if (virtex_device_fixup(index) != 0)
-			continue;
-
-		if (platform_device_register(index)) {
-			ret = 1;
-			printk(KERN_ERR "cannot register dev %s:%d\n",
-			       index->name, index->id);
-		}
-	}
-	return ret;
-}
-
-subsys_initcall(virtex_init);
diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h
deleted file mode 100644
index 6ebd9b4b8f1c..000000000000
--- a/arch/ppc/syslib/virtex_devices.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Common support header for virtex ppc405 platforms
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_VIRTEX_DEVICES_H__
-#define __ASM_VIRTEX_DEVICES_H__
-
-#include <linux/platform_device.h>
-#include <linux/xilinxfb.h>
-
-void __init virtex_early_serial_map(void);
-
-/* Prototype for device fixup routine.  Implement this routine in the
- * board specific fixup code and the generic setup code will call it for
- * each device is the platform device list.
- *
- * If the hook returns a non-zero value, then the device will not get
- * registered with the platform bus
- */
-int virtex_device_fixup(struct platform_device *dev);
-
-/* SPI Controller IP */
-struct xspi_platform_data {
-	s16 bus_num;
-	u16 num_chipselect;
-	u32 speed_hz;
-};
-
-#endif  /* __ASM_VIRTEX_DEVICES_H__ */
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
deleted file mode 100644
index 3b82333e96d8..000000000000
--- a/arch/ppc/syslib/xilinx_pic.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex-II Pro.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/ibm4xx.h>
-#include <asm/machdep.h>
-
-/* No one else should require these constants, so define them locally here. */
-#define ISR 0			/* Interrupt Status Register */
-#define IPR 1			/* Interrupt Pending Register */
-#define IER 2			/* Interrupt Enable Register */
-#define IAR 3			/* Interrupt Acknowledge Register */
-#define SIE 4			/* Set Interrupt Enable bits */
-#define CIE 5			/* Clear Interrupt Enable bits */
-#define IVR 6			/* Interrupt Vector Register */
-#define MER 7			/* Master Enable Register */
-
-#if XPAR_XINTC_USE_DCR == 0
-static volatile u32 *intc;
-#define intc_out_be32(addr, mask)     out_be32((addr), (mask))
-#define intc_in_be32(addr)            in_be32((addr))
-#else
-#define intc    XPAR_INTC_0_BASEADDR
-#define intc_out_be32(addr, mask)     mtdcr((addr), (mask))
-#define intc_in_be32(addr)            mfdcr((addr))
-#endif
-
-static void
-xilinx_intc_enable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("enable: %d\n", irq);
-	intc_out_be32(intc + SIE, mask);
-}
-
-static void
-xilinx_intc_disable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-}
-
-static void
-xilinx_intc_disable_and_ack(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable_and_ack: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-	if (!(irq_desc[irq].status & IRQ_LEVEL))
-		intc_out_be32(intc + IAR, mask);	/* ack edge triggered intr */
-}
-
-static void
-xilinx_intc_end(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-
-	pr_debug("end: %d\n", irq);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-		intc_out_be32(intc + SIE, mask);
-		/* ack level sensitive intr */
-		if (irq_desc[irq].status & IRQ_LEVEL)
-			intc_out_be32(intc + IAR, mask);
-	}
-}
-
-static struct hw_interrupt_type xilinx_intc = {
-	.typename = "Xilinx Interrupt Controller",
-	.enable = xilinx_intc_enable,
-	.disable = xilinx_intc_disable,
-	.ack = xilinx_intc_disable_and_ack,
-	.end = xilinx_intc_end,
-};
-
-int
-xilinx_pic_get_irq(void)
-{
-	int irq;
-
-	/*
-	 * NOTE: This function is the one that needs to be improved in
-	 * order to handle multiple interrupt controllers.  It currently
-	 * is hardcoded to check for interrupts only on the first INTC.
-	 */
-
-	irq = intc_in_be32(intc + IVR);
-	if (irq != -1)
-		irq = irq;
-
-	pr_debug("get_irq: %d\n", irq);
-
-	return (irq);
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * NOTE: The assumption here is that NR_IRQS is 32 or less
-	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
-	 */
-#if (NR_IRQS > 32)
-#error NR_IRQS > 32 not supported
-#endif
-
-#if XPAR_XINTC_USE_DCR == 0
-	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
-
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
-#else
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR);
-#endif
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	intc_out_be32(intc + IER, 0);
-
-	/* Acknowledge any pending interrupts just in case. */
-	intc_out_be32(intc + IAR, ~(u32) 0);
-
-	/* Turn on the Master Enable. */
-	intc_out_be32(intc + MER, 0x3UL);
-
-	ppc_md.get_irq = xilinx_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; ++i) {
-		irq_desc[i].chip = &xilinx_intc;
-
-		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
-			irq_desc[i].status &= ~IRQ_LEVEL;
-		else
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-}