Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1083 insertions, 0 deletions

diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
new file mode 100644
index 000000000000..406f36a8a681
--- /dev/null
+++ b/arch/ppc/syslib/open_pic.c
@@ -0,0 +1,1083 @@
+/*
+ *  arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/open_pic.h>
+#include <asm/i8259.h>
+
+#include "open_pic_defs.h"
+
+#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
+#define OPENPIC_BIG_ENDIAN
+#endif
+
+void __iomem *OpenPIC_Addr;
+static volatile struct OpenPIC __iomem *OpenPIC = NULL;
+
+/*
+ * We define OpenPIC_InitSenses table thusly:
+ * bit 0x1: sense, 0 for edge and 1 for level.
+ * bit 0x2: polarity, 0 for negative, 1 for positive.
+ */
+u_int OpenPIC_NumInitSenses __initdata = 0;
+u_char *OpenPIC_InitSenses __initdata = NULL;
+extern int use_of_interrupt_tree;
+
+static u_int NumProcessors;
+static u_int NumSources;
+static int open_pic_irq_offset;
+static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
+static int openpic_cascade_irq = -1;
+static int (*openpic_cascade_fn)(struct pt_regs *);
+
+/* Global Operations */
+static void openpic_disable_8259_pass_through(void);
+static void openpic_set_spurious(u_int vector);
+
+#ifdef CONFIG_SMP
+/* Interprocessor Interrupts */
+static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
+static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *);
+#endif
+
+/* Timer Interrupts */
+static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
+static void openpic_maptimer(u_int timer, cpumask_t cpumask);
+
+/* Interrupt Sources */
+static void openpic_enable_irq(u_int irq);
+static void openpic_disable_irq(u_int irq);
+static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
+			    int is_level);
+static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
+
+/*
+ * These functions are not used but the code is kept here
+ * for completeness and future reference.
+ */
+#ifdef notused
+static void openpic_enable_8259_pass_through(void);
+static u_int openpic_get_priority(void);
+static u_int openpic_get_spurious(void);
+static void openpic_set_sense(u_int irq, int sense);
+#endif /* notused */
+
+/*
+ * Description of the openpic for the higher-level irq code
+ */
+static void openpic_end_irq(unsigned int irq_nr);
+static void openpic_ack_irq(unsigned int irq_nr);
+static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
+
+struct hw_interrupt_type open_pic = {
+	.typename	= " OpenPIC  ",
+	.enable		= openpic_enable_irq,
+	.disable	= openpic_disable_irq,
+	.ack		= openpic_ack_irq,
+	.end		= openpic_end_irq,
+	.set_affinity	= openpic_set_affinity,
+};
+
+#ifdef CONFIG_SMP
+static void openpic_end_ipi(unsigned int irq_nr);
+static void openpic_ack_ipi(unsigned int irq_nr);
+static void openpic_enable_ipi(unsigned int irq_nr);
+static void openpic_disable_ipi(unsigned int irq_nr);
+
+struct hw_interrupt_type open_pic_ipi = {
+	.typename	= " OpenPIC  ",
+	.enable		= openpic_enable_ipi,
+	.disable	= openpic_disable_ipi,
+	.ack		= openpic_ack_ipi,
+	.end		= openpic_end_ipi,
+};
+#endif /* CONFIG_SMP */
+
+/*
+ *  Accesses to the current processor's openpic registers
+ */
+#ifdef CONFIG_SMP
+#define THIS_CPU		Processor[cpu]
+#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
+#define CHECK_THIS_CPU		check_arg_cpu(cpu)
+#else
+#define THIS_CPU		Processor[0]
+#define DECL_THIS_CPU
+#define CHECK_THIS_CPU
+#endif /* CONFIG_SMP */
+
+#if 1
+#define check_arg_ipi(ipi) \
+    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
+	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
+#define check_arg_timer(timer) \
+    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
+	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
+#define check_arg_vec(vec) \
+    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
+	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
+#define check_arg_pri(pri) \
+    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
+	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
+/*
+ * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
+ * data has probably been corrupted and we're going to panic or deadlock later
+ * anyway --Troy
+ */
+#define check_arg_irq(irq) \
+    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
+	|| ISR[irq - open_pic_irq_offset] == 0) { \
+      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
+      dump_stack(); }
+#define check_arg_cpu(cpu) \
+    if (cpu < 0 || cpu >= NumProcessors){ \
+	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
+	dump_stack(); }
+#else
+#define check_arg_ipi(ipi)	do {} while (0)
+#define check_arg_timer(timer)	do {} while (0)
+#define check_arg_vec(vec)	do {} while (0)
+#define check_arg_pri(pri)	do {} while (0)
+#define check_arg_irq(irq)	do {} while (0)
+#define check_arg_cpu(cpu)	do {} while (0)
+#endif
+
+u_int openpic_read(volatile u_int __iomem *addr)
+{
+	u_int val;
+
+#ifdef OPENPIC_BIG_ENDIAN
+	val = in_be32(addr);
+#else
+	val = in_le32(addr);
+#endif
+	return val;
+}
+
+static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
+{
+#ifdef OPENPIC_BIG_ENDIAN
+	out_be32(addr, val);
+#else
+	out_le32(addr, val);
+#endif
+}
+
+static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
+{
+	u_int val = openpic_read(addr);
+	return val & mask;
+}
+
+inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
+			       u_int field)
+{
+	u_int val = openpic_read(addr);
+	openpic_write(addr, (val & ~mask) | (field & mask));
+}
+
+static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
+{
+	openpic_writefield(addr, mask, 0);
+}
+
+static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
+{
+	openpic_writefield(addr, mask, mask);
+}
+
+static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
+				    u_int field)
+{
+	openpic_setfield(addr, OPENPIC_MASK);
+	while (openpic_read(addr) & OPENPIC_ACTIVITY);
+	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
+}
+
+#ifdef CONFIG_SMP
+/* yes this is right ... bug, feature, you decide! -- tgall */
+u_int openpic_read_IPI(volatile u_int __iomem * addr)
+{
+         u_int val = 0;
+#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
+        val = in_be32(addr);
+#else
+        val = in_le32(addr);
+#endif
+        return val;
+}
+
+/* because of the power3 be / le above, this is needed */
+inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
+{
+        u_int  val = openpic_read_IPI(addr);
+        openpic_write(addr, (val & ~mask) | (field & mask));
+}
+
+static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
+{
+        openpic_writefield_IPI(addr, mask, 0);
+}
+
+static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
+{
+        openpic_writefield_IPI(addr, mask, mask);
+}
+
+static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
+{
+        openpic_setfield_IPI(addr, OPENPIC_MASK);
+
+        /* wait until it's not in use */
+        /* BenH: Is this code really enough ? I would rather check the result
+         *       and eventually retry ...
+         */
+        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
+
+        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_EPIC_SERIAL_MODE
+/* On platforms that may use EPIC serial mode, the default is enabled. */
+int epic_serial_mode = 1;
+
+static void __init openpic_eicr_set_clk(u_int clkval)
+{
+	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
+			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
+}
+
+static void __init openpic_enable_sie(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
+			OPENPIC_EICR_SIE);
+}
+#endif
+
+#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+static void openpic_reset(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_RESET);
+	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
+				 OPENPIC_CONFIG_RESET))
+		mb();
+}
+#endif
+
+void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
+{
+	volatile OpenPIC_Source __iomem *src = first_ISR;
+	int i, last_irq;
+
+	last_irq = first_irq + num_irqs;
+	if (last_irq > NumSources)
+		NumSources = last_irq;
+	if (src == 0)
+		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
+	for (i = first_irq; i < last_irq; ++i, ++src)
+		ISR[i] = src;
+}
+
+/*
+ * The `offset' parameter defines where the interrupts handled by the
+ * OpenPIC start in the space of interrupt numbers that the kernel knows
+ * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
+ * kernel's interrupt numbering scheme.
+ * We assume there is only one OpenPIC.
+ */
+void __init openpic_init(int offset)
+{
+	u_int t, i;
+	u_int timerfreq;
+	const char *version;
+
+	if (!OpenPIC_Addr) {
+		printk("No OpenPIC found !\n");
+		return;
+	}
+	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
+
+#ifdef CONFIG_EPIC_SERIAL_MODE
+	/* Have to start from ground zero.
+	*/
+	openpic_reset();
+#endif
+
+	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
+
+	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
+	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
+	case 1:
+		version = "1.0";
+		break;
+	case 2:
+		version = "1.2";
+		break;
+	case 3:
+		version = "1.3";
+		break;
+	default:
+		version = "?";
+		break;
+	}
+	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
+			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
+	if (NumSources == 0)
+		openpic_set_sources(0,
+				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
+				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
+				    NULL);
+	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
+	       version, NumProcessors, NumSources, OpenPIC);
+	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
+	if (timerfreq)
+		printk("OpenPIC timer frequency is %d.%06d MHz\n",
+		       timerfreq / 1000000, timerfreq % 1000000);
+
+	open_pic_irq_offset = offset;
+
+	/* Initialize timer interrupts */
+	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
+	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
+		/* Disabled, Priority 0 */
+		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
+		/* No processor */
+		openpic_maptimer(i, CPU_MASK_NONE);
+	}
+
+#ifdef CONFIG_SMP
+	/* Initialize IPI interrupts */
+	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
+	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
+		/* Disabled, Priority 10..13 */
+		openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset);
+		/* IPIs are per-CPU */
+		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
+		irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
+	}
+#endif
+
+	/* Initialize external interrupts */
+	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
+
+	openpic_set_priority(0xf);
+
+	/* Init all external sources, including possibly the cascade. */
+	for (i = 0; i < NumSources; i++) {
+		int sense;
+
+		if (ISR[i] == 0)
+			continue;
+
+		/* the bootloader may have left it enabled (bad !) */
+		openpic_disable_irq(i+offset);
+
+		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
+				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
+
+		if (sense & IRQ_SENSE_MASK)
+			irq_desc[i+offset].status = IRQ_LEVEL;
+
+		/* Enabled, Priority 8 */
+		openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
+				(sense & IRQ_SENSE_MASK));
+		/* Processor 0 */
+		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
+	}
+
+	/* Init descriptors */
+	for (i = offset; i < NumSources + offset; i++)
+		irq_desc[i].handler = &open_pic;
+
+	/* Initialize the spurious interrupt */
+	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
+	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
+	openpic_disable_8259_pass_through();
+#ifdef CONFIG_EPIC_SERIAL_MODE
+	if (epic_serial_mode) {
+		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
+		openpic_enable_sie();
+	}
+#endif
+	openpic_set_priority(0);
+
+	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
+}
+
+#ifdef notused
+static void openpic_enable_8259_pass_through(void)
+{
+	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
+			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+#endif /* notused */
+
+static void openpic_disable_8259_pass_through(void)
+{
+	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
+}
+
+/*
+ *  Find out the current interrupt
+ */
+u_int openpic_irq(void)
+{
+	u_int vec;
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
+				OPENPIC_VECTOR_MASK);
+	return vec;
+}
+
+void openpic_eoi(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
+	/* Handle PCI write posting */
+	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
+}
+
+#ifdef notused
+static u_int openpic_get_priority(void)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
+				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
+}
+#endif /* notused */
+
+void openpic_set_priority(u_int pri)
+{
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	check_arg_pri(pri);
+	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
+			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
+}
+
+/*
+ *  Get/set the spurious vector
+ */
+#ifdef notused
+static u_int openpic_get_spurious(void)
+{
+	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
+				 OPENPIC_VECTOR_MASK);
+}
+#endif /* notused */
+
+static void openpic_set_spurious(u_int vec)
+{
+	check_arg_vec(vec);
+	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
+			   vec);
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Convert a cpu mask from logical to physical cpu numbers.
+ */
+static inline cpumask_t physmask(cpumask_t cpumask)
+{
+	int i;
+	cpumask_t mask = CPU_MASK_NONE;
+
+	cpus_and(cpumask, cpu_online_map, cpumask);
+
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_isset(i, cpumask))
+			cpu_set(smp_hw_index[i], mask);
+
+	return mask;
+}
+#else
+#define physmask(cpumask)	(cpumask)
+#endif
+
+void openpic_reset_processor_phys(u_int mask)
+{
+	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
+}
+
+#if defined(CONFIG_SMP) || defined(CONFIG_PM)
+static DEFINE_SPINLOCK(openpic_setup_lock);
+#endif
+
+#ifdef CONFIG_SMP
+/*
+ *  Initialize an interprocessor interrupt (and disable it)
+ *
+ *  ipi: OpenPIC interprocessor interrupt number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ */
+static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
+{
+	check_arg_ipi(ipi);
+	check_arg_pri(pri);
+	check_arg_vec(vec);
+	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
+}
+
+/*
+ *  Send an IPI to one or more CPUs
+ *
+ *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
+ *  and not a system-wide interrupt number
+ */
+void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
+{
+	cpumask_t phys;
+	DECL_THIS_CPU;
+
+	CHECK_THIS_CPU;
+	check_arg_ipi(ipi);
+	phys = physmask(cpumask);
+	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
+		      cpus_addr(physmask(cpumask))[0]);
+}
+
+void openpic_request_IPIs(void)
+{
+	int i;
+
+	/*
+	 * Make sure this matches what is defined in smp.c for
+	 * smp_message_{pass|recv}() or what shows up in
+	 * /proc/interrupts will be wrong!!! --Troy */
+
+	if (OpenPIC == NULL)
+		return;
+
+	/* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI0 (call function)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI1 (reschedule)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI2 (invalidate tlb)", NULL);
+	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
+		    openpic_ipi_action, SA_INTERRUPT,
+		    "IPI3 (xmon break)", NULL);
+
+	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
+		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
+}
+
+/*
+ * Do per-cpu setup for SMP systems.
+ *
+ * Get IPI's working and start taking interrupts.
+ *   -- Cort
+ */
+
+void __devinit do_openpic_setup_cpu(void)
+{
+#ifdef CONFIG_IRQ_ALL_CPUS
+ 	int i;
+	cpumask_t msk = CPU_MASK_NONE;
+#endif
+	spin_lock(&openpic_setup_lock);
+
+#ifdef CONFIG_IRQ_ALL_CPUS
+	cpu_set(smp_hw_index[smp_processor_id()], msk);
+
+ 	/* let the openpic know we want intrs. default affinity
+ 	 * is 0xffffffff until changed via /proc
+ 	 * That's how it's done on x86. If we want it differently, then
+ 	 * we should make sure we also change the default values of irq_affinity
+ 	 * in irq.c.
+ 	 */
+ 	for (i = 0; i < NumSources; i++)
+		openpic_mapirq(i, msk, CPU_MASK_ALL);
+#endif /* CONFIG_IRQ_ALL_CPUS */
+ 	openpic_set_priority(0);
+
+	spin_unlock(&openpic_setup_lock);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ *  Initialize a timer interrupt (and disable it)
+ *
+ *  timer: OpenPIC timer number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ */
+static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
+{
+	check_arg_timer(timer);
+	check_arg_pri(pri);
+	check_arg_vec(vec);
+	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
+}
+
+/*
+ *  Map a timer interrupt to one or more CPUs
+ */
+static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
+{
+	cpumask_t phys = physmask(cpumask);
+	check_arg_timer(timer);
+	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
+		      cpus_addr(phys)[0]);
+}
+
+/*
+ * Initalize the interrupt source which will generate an NMI.
+ * This raises the interrupt's priority from 8 to 9.
+ *
+ * irq: The logical IRQ which generates an NMI.
+ */
+void __init
+openpic_init_nmi_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK,
+				9 << OPENPIC_PRIORITY_SHIFT);
+}
+
+/*
+ *
+ * All functions below take an offset'ed irq argument
+ *
+ */
+
+/*
+ * Hookup a cascade to the OpenPIC.
+ */
+
+static struct irqaction openpic_cascade_irqaction = {
+	.handler = no_action,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+};
+
+void __init
+openpic_hookup_cascade(u_int irq, char *name,
+	int (*cascade_fn)(struct pt_regs *))
+{
+	openpic_cascade_irq = irq;
+	openpic_cascade_fn = cascade_fn;
+
+	if (setup_irq(irq, &openpic_cascade_irqaction))
+		printk("Unable to get OpenPIC IRQ %d for cascade\n",
+				irq - open_pic_irq_offset);
+}
+
+/*
+ *  Enable/disable an external interrupt source
+ *
+ *  Externally called, irq is an offseted system-wide interrupt number
+ */
+static void openpic_enable_irq(u_int irq)
+{
+	volatile u_int __iomem *vpp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
+	openpic_clearfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+	do {
+		mb(); /* sync is probably useless here */
+	} while (openpic_readfield(vpp, OPENPIC_MASK));
+}
+
+static void openpic_disable_irq(u_int irq)
+{
+	volatile u_int __iomem *vpp;
+	u32 vp;
+
+	check_arg_irq(irq);
+	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
+	openpic_setfield(vpp, OPENPIC_MASK);
+	/* make sure mask gets to controller before we return to user */
+	do {
+		mb();  /* sync is probably useless here */
+		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
+	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
+}
+
+#ifdef CONFIG_SMP
+/*
+ *  Enable/disable an IPI interrupt source
+ *
+ *  Externally called, irq is an offseted system-wide interrupt number
+ */
+void openpic_enable_ipi(u_int irq)
+{
+	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
+	check_arg_ipi(irq);
+	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
+
+}
+
+void openpic_disable_ipi(u_int irq)
+{
+	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
+	check_arg_ipi(irq);
+	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
+}
+#endif
+
+/*
+ *  Initialize an interrupt source (and disable it!)
+ *
+ *  irq: OpenPIC interrupt number
+ *  pri: interrupt source priority
+ *  vec: the vector it will produce
+ *  pol: polarity (1 for positive, 0 for negative)
+ *  sense: 1 for level, 0 for edge
+ */
+static void __init
+openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
+{
+	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
+				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
+				(pol ? OPENPIC_POLARITY_POSITIVE :
+			    		OPENPIC_POLARITY_NEGATIVE) |
+				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
+}
+
+/*
+ *  Map an interrupt source to one or more CPUs
+ */
+static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
+{
+	if (ISR[irq] == 0)
+		return;
+	if (!cpus_empty(keepmask)) {
+		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
+		cpus_and(irqdest, irqdest, keepmask);
+		cpus_or(physmask, physmask, irqdest);
+	}
+	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
+}
+
+#ifdef notused
+/*
+ *  Set the sense for an interrupt source (and disable it!)
+ *
+ *  sense: 1 for level, 0 for edge
+ */
+static void openpic_set_sense(u_int irq, int sense)
+{
+	if (ISR[irq] != 0)
+		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
+					OPENPIC_SENSE_LEVEL,
+					(sense ? OPENPIC_SENSE_LEVEL : 0));
+}
+#endif /* notused */
+
+/* No spinlocks, should not be necessary with the OpenPIC
+ * (1 register = 1 interrupt and we have the desc lock).
+ */
+static void openpic_ack_irq(unsigned int irq_nr)
+{
+#ifdef __SLOW_VERSION__
+	openpic_disable_irq(irq_nr);
+	openpic_eoi();
+#else
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+		openpic_eoi();
+#endif
+}
+
+static void openpic_end_irq(unsigned int irq_nr)
+{
+#ifdef __SLOW_VERSION__
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action)
+		openpic_enable_irq(irq_nr);
+#else
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
+		openpic_eoi();
+#endif
+}
+
+static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
+{
+	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
+}
+
+#ifdef CONFIG_SMP
+static void openpic_ack_ipi(unsigned int irq_nr)
+{
+	openpic_eoi();
+}
+
+static void openpic_end_ipi(unsigned int irq_nr)
+{
+}
+
+static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs);
+	return IRQ_HANDLED;
+}
+
+#endif /* CONFIG_SMP */
+
+int
+openpic_get_irq(struct pt_regs *regs)
+{
+	int irq = openpic_irq();
+
+	/*
+	 * Check for the cascade interrupt and call the cascaded
+	 * interrupt controller function (usually i8259_irq) if so.
+	 * This should move to irq.c eventually.  -- paulus
+	 */
+	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
+		int cirq = openpic_cascade_fn(regs);
+
+		/* Allow for the cascade being shared with other devices */
+		if (cirq != -1) {
+			irq = cirq;
+			openpic_eoi();
+		}
+	} else if (irq == OPENPIC_VEC_SPURIOUS)
+		irq = -1;
+	return irq;
+}
+
+#ifdef CONFIG_SMP
+void
+smp_openpic_message_pass(int target, int msg, unsigned long data, int wait)
+{
+	cpumask_t mask = CPU_MASK_ALL;
+	/* make sure we're sending something that translates to an IPI */
+	if (msg > 0x3) {
+		printk("SMP %d: smp_message_pass: unknown msg %d\n",
+		       smp_processor_id(), msg);
+		return;
+	}
+	switch (target) {
+	case MSG_ALL:
+		openpic_cause_IPI(msg, mask);
+		break;
+	case MSG_ALL_BUT_SELF:
+		cpu_clear(smp_processor_id(), mask);
+		openpic_cause_IPI(msg, mask);
+		break;
+	default:
+		openpic_cause_IPI(msg, cpumask_of_cpu(target));
+		break;
+	}
+}
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PM
+
+/*
+ * We implement the IRQ controller as a sysdev and put it
+ * to sleep at powerdown stage (the callback is named suspend,
+ * but it's old semantics, for the Device Model, it's really
+ * powerdown). The possible problem is that another sysdev that
+ * happens to be suspend after this one will have interrupts off,
+ * that may be an issue... For now, this isn't an issue on pmac
+ * though...
+ */
+
+static u32 save_ipi_vp[OPENPIC_NUM_IPI];
+static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
+static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
+static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
+static int openpic_suspend_count;
+
+static void openpic_cached_enable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
+}
+
+static void openpic_cached_disable_irq(u_int irq)
+{
+	check_arg_irq(irq);
+	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic_suspend(struct sys_device *sysdev, u32 state)
+{
+	int	i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&openpic_setup_lock, flags);
+
+	if (openpic_suspend_count++ > 0) {
+		spin_unlock_irqrestore(&openpic_setup_lock, flags);
+		return 0;
+	}
+
+ 	openpic_set_priority(0xf);
+
+	open_pic.enable = openpic_cached_enable_irq;
+	open_pic.disable = openpic_cached_disable_irq;
+
+	for (i=0; i<NumProcessors; i++) {
+		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
+		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
+				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
+	}
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
+		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
+	}
+
+	spin_unlock_irqrestore(&openpic_setup_lock, flags);
+
+	return 0;
+}
+
+/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
+ * we need something better to deal with that... Maybe switch to S1 for
+ * cpufreq changes
+ */
+int openpic_resume(struct sys_device *sysdev)
+{
+	int		i;
+	unsigned long	flags;
+	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
+					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
+					OPENPIC_MASK;
+
+	spin_lock_irqsave(&openpic_setup_lock, flags);
+
+	if ((--openpic_suspend_count) > 0) {
+		spin_unlock_irqrestore(&openpic_setup_lock, flags);
+		return 0;
+	}
+
+	openpic_reset();
+
+	/* OpenPIC sometimes seem to need some time to be fully back up... */
+	do {
+		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
+	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
+			!= OPENPIC_VEC_SPURIOUS);
+	
+	openpic_disable_8259_pass_through();
+
+	for (i=0; i<OPENPIC_NUM_IPI; i++)
+		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
+			      save_ipi_vp[i]);
+	for (i=0; i<NumSources; i++) {
+		if (ISR[i] == 0)
+			continue;
+		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
+		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		/* make sure mask gets to controller before we return to user */
+		do {
+			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
+		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
+			 != (save_irq_src_vp[i] & vppmask));
+	}
+	for (i=0; i<NumProcessors; i++)
+		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
+			      save_cpu_task_pri[i]);
+
+	open_pic.enable = openpic_enable_irq;
+	open_pic.disable = openpic_disable_irq;
+
+ 	openpic_set_priority(0);
+
+	spin_unlock_irqrestore(&openpic_setup_lock, flags);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class openpic_sysclass = {
+	set_kset_name("openpic"),
+};
+
+static struct sys_device device_openpic = {
+	.id		= 0,
+	.cls		= &openpic_sysclass,
+};
+
+static struct sysdev_driver driver_openpic = {
+#ifdef CONFIG_PM
+	.suspend	= &openpic_suspend,
+	.resume		= &openpic_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_openpic_sysfs(void)
+{
+	int rc;
+
+	if (!OpenPIC_Addr)
+		return -ENODEV;
+	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
+	rc = sysdev_class_register(&openpic_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&device_openpic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
+	if (rc) {
+		printk(KERN_ERR "Failed registering openpic sys driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+subsys_initcall(init_openpic_sysfs);
+