summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
authorJoel H Schopp <jschopp@us.ibm.com>2006-05-01 12:16:11 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-05-01 18:17:46 -0700
commitbed120c64eb07b6838bb758109811484af8cebba (patch)
tree884231ab38d01a2b19c6d062f5230ea8b9f5ecb3 /arch/powerpc/platforms
parent46a66eecdf7bc12562ecb492297447ed0e1ecf59 (diff)
downloadblackbird-op-linux-bed120c64eb07b6838bb758109811484af8cebba.tar.gz
blackbird-op-linux-bed120c64eb07b6838bb758109811484af8cebba.zip
[PATCH] spufs: fix for CONFIG_NUMA
Based on an older patch from Mike Kravetz <kravetz@us.ibm.com> We need to have a mem_map for high addresses in order to make fops->no_page work on spufs mem and register files. So far, we have used the memory_present() function during early bootup, but that did not work when CONFIG_NUMA was enabled. We now use the __add_pages() function to add the mem_map when loading the spufs module, which is a lot nicer. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/cell/Kconfig3
-rw-r--r--arch/powerpc/platforms/cell/setup.c78
-rw-r--r--arch/powerpc/platforms/cell/spu_base.c72
3 files changed, 65 insertions, 88 deletions
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index c2a3db8edb0c..6a02d51086c8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -12,7 +12,8 @@ config SPU_FS
config SPUFS_MMAP
bool
- depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+ depends on SPU_FS && SPARSEMEM
+ select MEMORY_HOTPLUG
default y
endmenu
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index dac5d0365fde..6574b22b3cf3 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -29,6 +29,8 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/console.h>
+#include <linux/mutex.h>
+#include <linux/memory_hotplug.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -46,6 +48,7 @@
#include <asm/cputable.h>
#include <asm/ppc-pci.h>
#include <asm/irq.h>
+#include <asm/spu.h>
#include "interrupt.h"
#include "iommu.h"
@@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m)
of_node_put(root);
}
-#ifdef CONFIG_SPARSEMEM
-static int __init find_spu_node_id(struct device_node *spe)
-{
- unsigned int *id;
-#ifdef CONFIG_NUMA
- struct device_node *cpu;
- cpu = spe->parent->parent;
- id = (unsigned int *)get_property(cpu, "node-id", NULL);
-#else
- id = NULL;
-#endif
- return id ? *id : 0;
-}
-
-static void __init cell_spuprop_present(struct device_node *spe,
- const char *prop, int early)
-{
- struct address_prop {
- unsigned long address;
- unsigned int len;
- } __attribute__((packed)) *p;
- int proplen;
-
- unsigned long start_pfn, end_pfn, pfn;
- int node_id;
-
- p = (void*)get_property(spe, prop, &proplen);
- WARN_ON(proplen != sizeof (*p));
-
- node_id = find_spu_node_id(spe);
-
- start_pfn = p->address >> PAGE_SHIFT;
- end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
- /* We need to call memory_present *before* the call to sparse_init,
- but we can initialize the page structs only *after* that call.
- Thus, we're being called twice. */
- if (early)
- memory_present(node_id, start_pfn, end_pfn);
- else {
- /* As the pages backing SPU LS and I/O are outside the range
- of regular memory, their page structs were not initialized
- by free_area_init. Do it here instead. */
- for (pfn = start_pfn; pfn < end_pfn; pfn++) {
- struct page *page = pfn_to_page(pfn);
- set_page_links(page, ZONE_DMA, node_id, pfn);
- init_page_count(page);
- reset_page_mapcount(page);
- SetPageReserved(page);
- INIT_LIST_HEAD(&page->lru);
- }
- }
-}
-
-static void __init cell_spumem_init(int early)
-{
- struct device_node *node;
- for (node = of_find_node_by_type(NULL, "spe");
- node; node = of_find_node_by_type(node, "spe")) {
- cell_spuprop_present(node, "local-store", early);
- cell_spuprop_present(node, "problem", early);
- cell_spuprop_present(node, "priv1", early);
- cell_spuprop_present(node, "priv2", early);
- }
-}
-#else
-static void __init cell_spumem_init(int early)
-{
-}
-#endif
-
static void cell_progress(char *s, unsigned short hex)
{
printk("*** %04x : %s\n", hex, s ? s : "");
@@ -172,8 +104,6 @@ static void __init cell_setup_arch(void)
#endif
mmio_nvram_init();
-
- cell_spumem_init(0);
}
/*
@@ -189,8 +119,6 @@ static void __init cell_init_early(void)
ppc64_interrupt_controller = IC_CELL_PIC;
- cell_spumem_init(1);
-
DBG(" <- cell_init_early()\n");
}
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index ef47a6239d48..b788e165c557 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -520,6 +520,56 @@ void spu_irq_setaffinity(struct spu *spu, int cpu)
}
EXPORT_SYMBOL_GPL(spu_irq_setaffinity);
+static int __init find_spu_node_id(struct device_node *spe)
+{
+ unsigned int *id;
+ struct device_node *cpu;
+ cpu = spe->parent->parent;
+ id = (unsigned int *)get_property(cpu, "node-id", NULL);
+ return id ? *id : 0;
+}
+
+static int __init cell_spuprop_present(struct device_node *spe,
+ const char *prop)
+{
+ static DEFINE_MUTEX(add_spumem_mutex);
+
+ struct address_prop {
+ unsigned long address;
+ unsigned int len;
+ } __attribute__((packed)) *p;
+ int proplen;
+
+ unsigned long start_pfn, nr_pages;
+ int node_id;
+ struct pglist_data *pgdata;
+ struct zone *zone;
+ int ret;
+
+ p = (void*)get_property(spe, prop, &proplen);
+ WARN_ON(proplen != sizeof (*p));
+
+ start_pfn = p->address >> PAGE_SHIFT;
+ nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ /*
+ * XXX need to get the correct NUMA node in here. This may
+ * be different from the spe::node_id property, e.g. when
+ * the host firmware is not NUMA aware.
+ */
+ node_id = 0;
+
+ pgdata = NODE_DATA(node_id);
+ zone = pgdata->node_zones;
+
+ /* XXX rethink locking here */
+ mutex_lock(&add_spumem_mutex);
+ ret = __add_pages(zone, start_pfn, nr_pages);
+ mutex_unlock(&add_spumem_mutex);
+
+ return ret;
+}
+
static void __iomem * __init map_spe_prop(struct device_node *n,
const char *name)
{
@@ -530,6 +580,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
void *p;
int proplen;
+ void* ret = NULL;
+ int err = 0;
p = get_property(n, name, &proplen);
if (proplen != sizeof (struct address_prop))
@@ -537,7 +589,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
prop = p;
- return ioremap(prop->address, prop->len);
+ err = cell_spuprop_present(n, name);
+ if (err && (err != -EEXIST))
+ goto out;
+
+ ret = ioremap(prop->address, prop->len);
+
+ out:
+ return ret;
}
static void spu_unmap(struct spu *spu)
@@ -597,17 +656,6 @@ out:
return ret;
}
-static int __init find_spu_node_id(struct device_node *spe)
-{
- unsigned int *id;
- struct device_node *cpu;
-
- cpu = spe->parent->parent;
- id = (unsigned int *)get_property(cpu, "node-id", NULL);
-
- return id ? *id : 0;
-}
-
static int __init create_spu(struct device_node *spe)
{
struct spu *spu;
OpenPOWER on IntegriCloud