Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits)
  serial: Add driver for the Cell Network Processor serial port NWP device
  powerpc: enable dynamic ftrace
  powerpc/cell: Fix the prototype of create_vma_map()
  powerpc/mm: Make clear_fixmap() actually work
  powerpc/kdump: Use ppc_save_regs() in crash_setup_regs()
  powerpc: Export cacheable_memzero as its now used in a driver
  powerpc: Fix missing semicolons in mmu_decl.h
  powerpc/pasemi: local_irq_save uses an unsigned long
  powerpc/cell: Fix some u64 vs. long types
  powerpc/cell: Use correct types in beat files
  powerpc: Use correct type in prom_init.c
  powerpc: Remove unnecessary casts
  mtd/ps3vram: Use _PAGE_NO_CACHE in memory ioremap
  mtd/ps3vram: Use msleep in waits
  mtd/ps3vram: Use proper kernel types
  mtd/ps3vram: Cleanup ps3vram driver messages
  mtd/ps3vram: Remove ps3vram debug routines
  mtd/ps3vram: Add modalias support to the ps3vram driver
  mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTD
  powerpc: Fix iseries drivers build failure without CONFIG_VIOPATH
  ...

26 files changed, 193 insertions, 44 deletions

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index ae7c34f37e1c..98367a0255f3 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -42,7 +42,7 @@ static struct of_device_id mpc52xx_bus_ids[] __initdata = {
  * from interrupt context while node mapping (which calls ioremap())
  * cannot be used at such point.
  */
-static spinlock_t mpc52xx_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(mpc52xx_lock);
 static struct mpc52xx_gpt __iomem *mpc52xx_wdt;
 static struct mpc52xx_cdm __iomem *mpc52xx_cdm;
 
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index a428f8d1ac80..5177bdd2c62a 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -42,7 +42,7 @@ static void __init mpc831x_rdb_setup_arch(void)
 	mpc831x_usb_cfg();
 }
 
-void __init mpc831x_rdb_init_IRQ(void)
+static void __init mpc831x_rdb_init_IRQ(void)
 {
 	struct device_node *np;
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index ec43477caa63..ec0b401bc9cf 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -49,8 +49,6 @@
 #define DBG(fmt...)
 #endif
 
-static u8 *bcsr_regs = NULL;
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -59,13 +57,14 @@ static u8 *bcsr_regs = NULL;
 static void __init mpc832x_sys_setup_arch(void)
 {
 	struct device_node *np;
+	u8 __iomem *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc832x_sys_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != 0) {
+	if (np) {
 		struct resource res;
 
 		of_address_to_resource(np, 0, &res);
@@ -93,9 +92,9 @@ static void __init mpc832x_sys_setup_arch(void)
 			!= NULL){
 		/* Reset the Ethernet PHYs */
 #define BCSR8_FETH_RST 0x50
-		bcsr_regs[8] &= ~BCSR8_FETH_RST;
+		clrbits8(&bcsr_regs[8], BCSR8_FETH_RST);
 		udelay(1000);
-		bcsr_regs[8] |= BCSR8_FETH_RST;
+		setbits8(&bcsr_regs[8], BCSR8_FETH_RST);
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 0300268ce5b8..2a1295f19832 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -38,6 +38,7 @@
 #define DBG(fmt...)
 #endif
 
+#ifdef CONFIG_QUICC_ENGINE
 static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
 {
 	pr_debug("%s %d %d\n", __func__, cs, polarity);
@@ -77,8 +78,8 @@ static int __init mpc832x_spi_init(void)
 			    mpc83xx_spi_activate_cs,
 			    mpc83xx_spi_deactivate_cs);
 }
-
 machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
+#endif /* CONFIG_QUICC_ENGINE */
 
 /* ************************************************************************
  *
@@ -130,7 +131,7 @@ static int __init mpc832x_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
 
-void __init mpc832x_rdb_init_IRQ(void)
+static void __init mpc832x_rdb_init_IRQ(void)
 {
 
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 9d46e5bdd101..09e9d6fb7411 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -18,6 +18,7 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/reboot.h>
@@ -43,6 +44,7 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -55,8 +57,6 @@
 #define DBG(fmt...)
 #endif
 
-static u8 *bcsr_regs = NULL;
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -65,13 +65,14 @@ static u8 *bcsr_regs = NULL;
 static void __init mpc836x_mds_setup_arch(void)
 {
 	struct device_node *np;
+	u8 __iomem *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc836x_mds_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != 0) {
+	if (np) {
 		struct resource res;
 
 		of_address_to_resource(np, 0, &res);
@@ -93,6 +94,16 @@ static void __init mpc836x_mds_setup_arch(void)
 
 		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
 			par_io_of_config(np);
+#ifdef CONFIG_QE_USB
+		/* Must fixup Par IO before QE GPIO chips are registered. */
+		par_io_config_pin(1,  2, 1, 0, 3, 0); /* USBOE  */
+		par_io_config_pin(1,  3, 1, 0, 3, 0); /* USBTP  */
+		par_io_config_pin(1,  8, 1, 0, 1, 0); /* USBTN  */
+		par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+		par_io_config_pin(1,  9, 2, 1, 3, 0); /* USBRP  */
+		par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN  */
+		par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21  */
+#endif /* CONFIG_QE_USB */
 	}
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
@@ -151,6 +162,70 @@ static int __init mpc836x_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
 
+#ifdef CONFIG_QE_USB
+static int __init mpc836x_usb_cfg(void)
+{
+	u8 __iomem *bcsr;
+	struct device_node *np;
+	const char *mode;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
+	if (!np)
+		return -ENODEV;
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!bcsr)
+		return -ENOMEM;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+	if (!np) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+#define BCSR8_TSEC1M_MASK	(0x3 << 6)
+#define BCSR8_TSEC1M_RGMII	(0x0 << 6)
+#define BCSR8_TSEC2M_MASK	(0x3 << 4)
+#define BCSR8_TSEC2M_RGMII	(0x0 << 4)
+	/*
+	 * Default is GMII (2), but we should set it to RGMII (0) if we use
+	 * USB (Eth PHY is in RGMII mode anyway).
+	 */
+	clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+			       BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK	0x0f
+#define BCSR13_nUSBEN	0x08 /* 1 - Disable, 0 - Enable			*/
+#define BCSR13_USBSPEED	0x04 /* 1 - Full, 0 - Low			*/
+#define BCSR13_USBMODE	0x02 /* 1 - Host, 0 - Function			*/
+#define BCSR13_nUSBVCC	0x01 /* 1 - gets VBUS, 0 - supplies VBUS 	*/
+
+	clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+	mode = of_get_property(np, "mode", NULL);
+	if (mode && !strcmp(mode, "peripheral")) {
+		setbits8(&bcsr[13], BCSR13_nUSBVCC);
+		qe_usb_clock_set(QE_CLK21, 48000000);
+	} else {
+		setbits8(&bcsr[13], BCSR13_USBMODE);
+		/*
+		 * The BCSR GPIOs are used to control power and
+		 * speed of the USB transceiver. This is needed for
+		 * the USB Host only.
+		 */
+		simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+	}
+
+	of_node_put(np);
+err:
+	iounmap(bcsr);
+	return ret;
+}
+machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
+#endif /* CONFIG_QE_USB */
+
 static void __init mpc836x_mds_init_IRQ(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index a5273bb28e1b..b0090aac9642 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -51,8 +51,9 @@ static void __init mpc836x_rdk_setup_arch(void)
 	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
 		mpc83xx_add_bridge(np);
 #endif
-
+#ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
+#endif
 }
 
 static void __init mpc836x_rdk_init_IRQ(void)
@@ -71,13 +72,14 @@ static void __init mpc836x_rdk_init_IRQ(void)
 	 */
 	ipic_set_default_priority();
 	of_node_put(np);
-
+#ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 	if (!np)
 		return;
 
 	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
 	of_node_put(np);
+#endif
 }
 
 /*
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8bb13c807142..530ef990ca7c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -26,7 +26,6 @@
 #define BCSR12_USB_SER_MASK	0x8a
 #define BCSR12_USB_SER_PIN	0x80
 #define BCSR12_USB_SER_DEVICE	0x02
-extern int mpc837x_usb_cfg(void);
 
 static int mpc837xmds_usb_cfg(void)
 {
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index da030afa2e2c..1d096545322b 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -21,8 +21,6 @@
 
 #include "mpc83xx.h"
 
-extern int mpc837x_usb_cfg(void);
-
 /* ************************************************************************
  *
  * Setup the architecture
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 2a7cbabb410a..83cfe51526ec 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -61,6 +61,7 @@
 
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
+extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index a8301c8ad537..7326d904202c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -148,6 +148,9 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 /*
  * Setup the architecture
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
 static void __init mpc85xx_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -173,6 +176,10 @@ static void __init mpc85xx_ds_setup_arch(void)
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
 }
 
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index d652c713f496..79a0df17078b 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -58,6 +58,7 @@ smp_85xx_kick_cpu(int nr)
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
+		local_irq_restore(flags);
 		return;
 	}
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47e956c871fe..47fe2bea9865 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -312,4 +312,15 @@ config MPC8xxx_GPIO
 	  Say Y here if you're going to use hardware that connects to the
 	  MPC831x/834x/837x/8572/8610 GPIOs.
 
+config SIMPLE_GPIO
+	bool "Support for simple, memory-mapped GPIO controllers"
+	depends on PPC
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here to support simple, memory-mapped GPIO controllers.
+	  These are usually BCSRs used to control board's switches, LEDs,
+	  chip-selects, Ethernet/USB PHY's power and various other small
+	  on-board peripherals.
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 3d0c776f888d..e868b5c50723 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -231,7 +231,7 @@ config VIRT_CPU_ACCOUNTING
 	  If in doubt, say Y here.
 
 config SMP
-	depends on PPC_STD_MMU
+	depends on PPC_STD_MMU || FSL_BOOKE
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 2e67bd840e01..35b1ec492715 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -44,8 +44,8 @@ static DEFINE_SPINLOCK(beat_htab_lock);
 
 static inline unsigned int beat_read_mask(unsigned hpte_group)
 {
-	unsigned long hpte_v[5];
 	unsigned long rmask = 0;
+	u64 hpte_v[5];
 
 	beat_read_htab_entries(0, hpte_group + 0, hpte_v);
 	if (!(hpte_v[0] & HPTE_V_BOLTED))
@@ -93,8 +93,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 				  int psize, int ssize)
 {
 	unsigned long lpar_rc;
-	unsigned long slot;
-	unsigned long hpte_v, hpte_r;
+	u64 hpte_v, hpte_r, slot;
 
 	/* same as iseries */
 	if (vflags & HPTE_V_SECONDARY)
@@ -153,8 +152,9 @@ static long beat_lpar_hpte_remove(unsigned long hpte_group)
 
 static unsigned long beat_lpar_hpte_getword0(unsigned long slot)
 {
-	unsigned long dword0, dword[5];
+	unsigned long dword0;
 	unsigned long lpar_rc;
+	u64 dword[5];
 
 	lpar_rc = beat_read_htab_entries(0, slot & ~3UL, dword);
 
@@ -170,7 +170,7 @@ static void beat_lpar_hptab_clear(void)
 	unsigned long size_bytes = 1UL << ppc64_pft_size;
 	unsigned long hpte_count = size_bytes >> 4;
 	int i;
-	unsigned long dummy0, dummy1;
+	u64 dummy0, dummy1;
 
 	/* TODO: Use bulk call */
 	for (i = 0; i < hpte_count; i++)
@@ -189,7 +189,8 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
 				    int psize, int ssize, int local)
 {
 	unsigned long lpar_rc;
-	unsigned long dummy0, dummy1, want_v;
+	u64 dummy0, dummy1;
+	unsigned long want_v;
 
 	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
 
@@ -255,7 +256,8 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
 					  unsigned long ea,
 					  int psize, int ssize)
 {
-	unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1;
+	unsigned long lpar_rc, slot, vsid, va;
+	u64 dummy0, dummy1;
 
 	vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
 	va = (vsid << 28) | (ea & 0x0fffffff);
@@ -276,7 +278,7 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 {
 	unsigned long want_v;
 	unsigned long lpar_rc;
-	unsigned long dummy1, dummy2;
+	u64 dummy1, dummy2;
 	unsigned long flags;
 
 	DBG_LOW("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
@@ -315,8 +317,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
 				  int psize, int ssize)
 {
 	unsigned long lpar_rc;
-	unsigned long slot;
-	unsigned long hpte_v, hpte_r;
+	u64 hpte_v, hpte_r, slot;
 
 	/* same as iseries */
 	if (vflags & HPTE_V_SECONDARY)
diff --git a/arch/powerpc/platforms/cell/beat_udbg.c b/arch/powerpc/platforms/cell/beat_udbg.c
index 6b418f6b6175..350735bc8888 100644
--- a/arch/powerpc/platforms/cell/beat_udbg.c
+++ b/arch/powerpc/platforms/cell/beat_udbg.c
@@ -40,8 +40,8 @@ static void udbg_putc_beat(char c)
 }
 
 /* Buffered chars getc */
-static long inbuflen;
-static long inbuf[2];	/* must be 2 longs */
+static u64 inbuflen;
+static u64 inbuf[2];	/* must be 2 u64s */
 
 static int udbg_getc_poll_beat(void)
 {
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
index 70fa7aef5edd..20472e487b6f 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
@@ -54,7 +54,7 @@ int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode)
 {
 	struct cbe_pmd_regs __iomem *pmd_regs;
 	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
-	u64 flags;
+	unsigned long flags;
 	u64 value;
 #ifdef DEBUG
 	long time;
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 2d5bb22d6c09..28c04dab2633 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -148,7 +148,7 @@ static unsigned int iic_get_irq(void)
 
 	iic = &__get_cpu_var(iic);
 	*(unsigned long *) &pending =
-		in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+		in_be64((u64 __iomem *) &iic->regs->pending_destr);
 	if (!(pending.flags & CBE_IIC_IRQ_VALID))
 		return NO_IRQ;
 	virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending));
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index b5f84e8f0899..059cad6c3f69 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -130,14 +130,14 @@ static const struct ppc_pci_io __devinitconst iowa_pci_io = {
 
 };
 
-static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size,
+static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 						unsigned long flags)
 {
 	struct iowa_bus *bus;
 	void __iomem *res = __ioremap(addr, size, flags);
 	int busno;
 
-	bus = iowa_pci_find(0, addr);
+	bus = iowa_pci_find(0, (unsigned long)addr);
 	if (bus != NULL) {
 		busno = bus - iowa_busses;
 		PCI_SET_ADDR_TOKEN(res, busno + 1);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 86db4dd170a0..88d94b59a7cb 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -150,8 +150,8 @@ static int cbe_nr_iommus;
 static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 		long n_ptes)
 {
-	unsigned long __iomem *reg;
-	unsigned long val;
+	u64 __iomem *reg;
+	u64 val;
 	long n;
 
 	reg = iommu->xlate_regs + IOC_IOPT_CacheInvd;
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index ed3753d8c109..7ddd0a2c8027 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -10,18 +10,21 @@ menu "iSeries device drivers"
 config VIODASD
 	tristate "iSeries Virtual I/O disk support"
 	depends on BLOCK
+	select VIOPATH
 	help
 	  If you are running on an iSeries system and you want to use
 	  virtual disks created and managed by OS/400, say Y.
 
 config VIOCD
 	tristate "iSeries Virtual I/O CD support"
+	select VIOPATH
 	help
 	  If you are running Linux on an IBM iSeries system and you want to
 	  read a CD drive owned by OS/400, say Y here.
 
 config VIOTAPE
 	tristate "iSeries Virtual Tape Support"
+	select VIOPATH
 	help
 	  If you are running Linux on an iSeries system and you want Linux
 	  to read and/or write a tape drive owned by OS/400, say Y here.
@@ -30,5 +33,3 @@ endmenu
 
 config VIOPATH
 	bool
-	depends on VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
-	default y
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 70b688c1aefb..24519b96d6ad 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -23,6 +23,7 @@
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/kdev_t.h>
+#include <linux/kexec.h>
 #include <linux/major.h>
 #include <linux/root_dev.h>
 #include <linux/kernel.h>
@@ -638,6 +639,13 @@ static int __init iseries_probe(void)
 	return 1;
 }
 
+#ifdef CONFIG_KEXEC
+static int iseries_kexec_prepare(struct kimage *image)
+{
+	return -ENOSYS;
+}
+#endif
+
 define_machine(iseries) {
 	.name			= "iSeries",
 	.setup_arch		= iSeries_setup_arch,
@@ -658,6 +666,9 @@ define_machine(iseries) {
 	.probe			= iseries_probe,
 	.ioremap		= iseries_ioremap,
 	.iounmap		= iseries_iounmap,
+#ifdef CONFIG_KEXEC
+	.machine_kexec_prepare	= iseries_kexec_prepare,
+#endif
 	/* XXX Implement enable_pmcs for iSeries */
 };
 
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index 58556b028a4c..86db47c1b665 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -112,7 +112,7 @@ static int get_gizmo_latency(void)
 
 static void set_astate(int cpu, unsigned int astate)
 {
-	u64 flags;
+	unsigned long flags;
 
 	/* Return if called before init has run */
 	if (unlikely(!sdcasr_mapbase))
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index 217af321b0ca..a6152d922243 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -509,7 +509,7 @@ fallback:
  */
 int pasemi_dma_init(void)
 {
-	static spinlock_t init_lock = SPIN_LOCK_UNLOCKED;
+	static DEFINE_SPINLOCK(init_lock);
 	struct pci_dev *iob_pdev;
 	struct pci_dev *pdev;
 	struct resource res;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 54b7b76ed4f0..04cdd32624d4 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -661,6 +661,7 @@ static void __init init_second_ohare(void)
 			pci_find_hose_for_OF_device(np);
 		if (!hose) {
 			printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+			of_node_put(np);
 			return;
 		}
 		early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
@@ -669,6 +670,7 @@ static void __init init_second_ohare(void)
 		early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
 	}
 	has_second_ohare = 1;
+	of_node_put(np);
 }
 
 /*
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 59eb840d8ce2..1810e4226e56 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -265,12 +265,15 @@ int __init via_calibrate_decr(void)
 	struct resource rsrc;
 
 	vias = of_find_node_by_name(NULL, "via-cuda");
-	if (vias == 0)
+	if (vias == NULL)
 		vias = of_find_node_by_name(NULL, "via-pmu");
-	if (vias == 0)
+	if (vias == NULL)
 		vias = of_find_node_by_name(NULL, "via");
-	if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
+	if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) {
+	        of_node_put(vias);
 		return 0;
+	}
+	of_node_put(vias);
 	via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
 	if (via == NULL) {
 		printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
@@ -297,7 +300,7 @@ int __init via_calibrate_decr(void)
 	ppc_tb_freq = (dstart - dend) * 100 / 6;
 
 	iounmap(via);
-	
+
 	return 1;
 }
 #endif
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index dbc124e05646..ca71a12b764c 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -518,6 +518,41 @@ fail_device_register:
 	return result;
 }
 
+static int __init ps3_register_ramdisk_device(void)
+{
+	int result;
+	struct layout {
+		struct ps3_system_bus_device dev;
+	} *p;
+
+	pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
+	p = kzalloc(sizeof(struct layout), GFP_KERNEL);
+
+	if (!p)
+		return -ENOMEM;
+
+	p->dev.match_id = PS3_MATCH_ID_GPU;
+	p->dev.match_sub_id = PS3_MATCH_SUB_ID_GPU_RAMDISK;
+	p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
+
+	result = ps3_system_bus_device_register(&p->dev);
+
+	if (result) {
+		pr_debug("%s:%d ps3_system_bus_device_register failed\n",
+			__func__, __LINE__);
+		goto fail_device_register;
+	}
+
+	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	return 0;
+
+fail_device_register:
+	kfree(p);
+	pr_debug(" <- %s:%d failed\n", __func__, __LINE__);
+	return result;
+}
+
 /**
  * ps3_setup_dynamic_device - Setup a dynamic device from the repository
  */
@@ -946,6 +981,8 @@ static int __init ps3_register_devices(void)
 
 	ps3_register_lpm_devices();
 
+	ps3_register_ramdisk_device();
+
 	pr_debug(" <- %s:%d\n", __func__, __LINE__);
 	return 0;
 }