powerpc/eeh: Probe mode support

While EEH module is installed, PCI devices is checked one by one
to see if it supports eeh. On different platforms, the PCI devices
are referred through different ways when the EEH module is loaded.
For example, on pSeries platform, that is done by OF node. However,
we would do that by real PCI devices (struct pci_dev) on PowerNV
platform in future. So we needs some mechanism to differentiate
those cases by classifying them to probe modes, either from OF
nodes or real PCI devices.

The patch implements the support to eeh probe mode. Also, the
EEH on pSeries has set it into EEH_PROBE_MODE_DEVTREE. That means
the probe will be done based on OF nodes on pSeries platform.

In addition, On pSeries platform, it's done by OF nodes. The patch
moves the the probe function from EEH core to platform dependent
backend and some cleanup applied.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 96 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index fdeef772d714..19506f935737 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -129,10 +129,104 @@ static int pseries_eeh_init(void)
 		eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
 	}
 
+	/* Set EEH probe mode */
+	eeh_probe_mode_set(EEH_PROBE_MODE_DEVTREE);
+
 	return 0;
 }
 
 /**
+ * pseries_eeh_of_probe - EEH probe on the given device
+ * @dn: OF node
+ * @flag: Unused
+ *
+ * When EEH module is installed during system boot, all PCI devices
+ * are checked one by one to see if it supports EEH. The function
+ * is introduced for the purpose.
+ */
+static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
+{
+	struct eeh_dev *edev;
+	struct eeh_pe pe;
+	const u32 *class_code, *vendor_id, *device_id;
+	const u32 *regs;
+	int enable = 0;
+	int ret;
+
+	/* Retrieve OF node and eeh device */
+	edev = of_node_to_eeh_dev(dn);
+	if (!of_device_is_available(dn))
+		return NULL;
+
+	/* Retrieve class/vendor/device IDs */
+	class_code = of_get_property(dn, "class-code", NULL);
+	vendor_id  = of_get_property(dn, "vendor-id", NULL);
+	device_id  = of_get_property(dn, "device-id", NULL);
+
+	/* Skip for bad OF node or PCI-ISA bridge */
+	if (!class_code || !vendor_id || !device_id)
+		return NULL;
+	if (dn->type && !strcmp(dn->type, "isa"))
+		return NULL;
+
+	/* Update class code and mode of eeh device */
+	edev->class_code = *class_code;
+	edev->mode = 0;
+
+	/* Retrieve the device address */
+	regs = of_get_property(dn, "reg", NULL);
+	if (!regs) {
+		pr_warning("%s: OF node property %s::reg not found\n",
+			__func__, dn->full_name);
+		return NULL;
+	}
+
+	/* Initialize the fake PE */
+	memset(&pe, 0, sizeof(struct eeh_pe));
+	pe.phb = edev->phb;
+	pe.config_addr = regs[0];
+
+	/* Enable EEH on the device */
+	ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+	if (!ret) {
+		edev->config_addr = regs[0];
+		/* Retrieve PE address */
+		edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+		pe.addr = edev->pe_config_addr;
+
+		/* Some older systems (Power4) allow the ibm,set-eeh-option
+		 * call to succeed even on nodes where EEH is not supported.
+		 * Verify support explicitly.
+		 */
+		ret = eeh_ops->get_state(&pe, NULL);
+		if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
+			enable = 1;
+
+		if (enable) {
+			eeh_subsystem_enabled = 1;
+			eeh_add_to_parent_pe(edev);
+
+			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
+				__func__, dn->full_name, pe.phb->global_number,
+				pe.addr, pe.config_addr);
+		} else if (dn->parent && of_node_to_eeh_dev(dn->parent) &&
+			   (of_node_to_eeh_dev(dn->parent))->pe) {
+			/* This device doesn't support EEH, but it may have an
+			 * EEH parent, in which case we mark it as supported.
+			 */
+			edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr;
+			edev->pe_config_addr = of_node_to_eeh_dev(dn->parent)->pe_config_addr;
+			eeh_add_to_parent_pe(edev);
+		}
+	}
+
+	/* Save memory bars */
+	eeh_save_bars(edev);
+
+	return NULL;
+}
+
+/**
  * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
  * @pe: EEH PE
  * @option: operation to be issued
@@ -523,6 +617,8 @@ static int pseries_eeh_write_config(struct device_node *dn, int where, int size,
 static struct eeh_ops pseries_eeh_ops = {
 	.name			= "pseries",
 	.init			= pseries_eeh_init,
+	.of_probe		= pseries_eeh_of_probe,
+	.dev_probe		= NULL,
 	.set_option		= pseries_eeh_set_option,
 	.get_pe_addr		= pseries_eeh_get_pe_addr,
 	.get_state		= pseries_eeh_get_state,