[PATCH] powerpc: Experimental support for new G5 Macs (#2)

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 179 insertions, 31 deletions

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 5aab261075de..f671ed253901 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1,7 +1,7 @@
 /*
  * Support for PCI bridges found on Power Macintoshes.
  *
- * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
  * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
  *
  * This program is free software; you can redistribute it and/or
@@ -25,7 +25,7 @@
 #include <asm/pmac_feature.h>
 #include <asm/grackle.h>
 #ifdef CONFIG_PPC64
-#include <asm/iommu.h>
+//#include <asm/iommu.h>
 #include <asm/ppc-pci.h>
 #endif
 
@@ -44,6 +44,7 @@ static int add_bridge(struct device_node *dev);
 static int has_uninorth;
 #ifdef CONFIG_PPC64
 static struct pci_controller *u3_agp;
+static struct pci_controller *u4_pcie;
 static struct pci_controller *u3_ht;
 #endif /* CONFIG_PPC64 */
 
@@ -97,11 +98,8 @@ static void __init fixup_bus_range(struct device_node *bridge)
 
 	/* Lookup the "bus-range" property for the hose */
 	bus_range = (int *) get_property(bridge, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s\n",
-			       bridge->full_name);
+	if (bus_range == NULL || len < 2 * sizeof(int))
 		return;
-	}
 	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
 }
 
@@ -128,14 +126,14 @@ static void __init fixup_bus_range(struct device_node *bridge)
  */
 
 #define MACRISC_CFA0(devfn, off)	\
-	((1 << (unsigned long)PCI_SLOT(dev_fn)) \
-	| (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
-	| (((unsigned long)(off)) & 0xFCUL))
+	((1 << (unsigned int)PCI_SLOT(dev_fn)) \
+	| (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+	| (((unsigned int)(off)) & 0xFCUL))
 
 #define MACRISC_CFA1(bus, devfn, off)	\
-	((((unsigned long)(bus)) << 16) \
-	|(((unsigned long)(devfn)) << 8) \
-	|(((unsigned long)(off)) & 0xFCUL) \
+	((((unsigned int)(bus)) << 16) \
+	|(((unsigned int)(devfn)) << 8) \
+	|(((unsigned int)(off)) & 0xFCUL) \
 	|1UL)
 
 static unsigned long macrisc_cfg_access(struct pci_controller* hose,
@@ -168,7 +166,8 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	if (offset >= 0x100)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
 	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -199,7 +198,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	if (offset >= 0x100)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
 	addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -234,12 +234,13 @@ static struct pci_ops macrisc_pci_ops =
 /*
  * Verify that a specific (bus, dev_fn) exists on chaos
  */
-static int
-chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
 {
 	struct device_node *np;
 	u32 *vendor, *device;
 
+	if (offset >= 0x100)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
 	np = pci_busdev_to_OF_node(bus, devfn);
 	if (np == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -341,10 +342,10 @@ static int u3_ht_skip_device(struct pci_controller *hose,
 }
 
 #define U3_HT_CFA0(devfn, off)		\
-		((((unsigned long)devfn) << 8) | offset)
+		((((unsigned int)devfn) << 8) | offset)
 #define U3_HT_CFA1(bus, devfn, off)	\
 		(U3_HT_CFA0(devfn, off) \
-		+ (((unsigned long)bus) << 16) \
+		+ (((unsigned int)bus) << 16) \
 		+ 0x01000000UL)
 
 static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
@@ -370,7 +371,8 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	if (offset >= 0x100)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
 	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -419,7 +421,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 	hose = pci_bus_to_host(bus);
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	if (offset >= 0x100)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
 	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -459,6 +462,112 @@ static struct pci_ops u3_ht_pci_ops =
 	u3_ht_read_config,
 	u3_ht_write_config
 };
+
+#define U4_PCIE_CFA0(devfn, off)	\
+	((1 << ((unsigned int)PCI_SLOT(dev_fn)))	\
+	 | (((unsigned int)PCI_FUNC(dev_fn)) << 8)	\
+	 | ((((unsigned int)(off)) >> 8) << 28) \
+	 | (((unsigned int)(off)) & 0xfcU))
+
+#define U4_PCIE_CFA1(bus, devfn, off)	\
+	((((unsigned int)(bus)) << 16) \
+	 |(((unsigned int)(devfn)) << 8)	\
+	 | ((((unsigned int)(off)) >> 8) << 28) \
+	 |(((unsigned int)(off)) & 0xfcU)	\
+	 |1UL)
+
+static unsigned long u4_pcie_cfg_access(struct pci_controller* hose,
+					u8 bus, u8 dev_fn, int offset)
+{
+	unsigned int caddr;
+
+	if (bus == hose->first_busno) {
+		caddr = U4_PCIE_CFA0(dev_fn, offset);
+	} else
+		caddr = U4_PCIE_CFA1(bus, dev_fn, offset);
+
+	/* Uninorth will return garbage if we don't read back the value ! */
+	do {
+		out_le32(hose->cfg_addr, caddr);
+	} while (in_le32(hose->cfg_addr) != caddr);
+
+	offset &= 0x03;
+	return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+			       int offset, int len, u32 *val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (offset >= 0x1000)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
+	addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *)addr);
+		break;
+	case 2:
+		*val = in_le16((u16 *)addr);
+		break;
+	default:
+		*val = in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 val)
+{
+	struct pci_controller *hose;
+	unsigned long addr;
+
+	hose = pci_bus_to_host(bus);
+	if (hose == NULL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	if (offset >= 0x1000)
+		return  PCIBIOS_BAD_REGISTER_NUMBER;
+	addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		out_8((u8 *)addr, val);
+		(void) in_8((u8 *)addr);
+		break;
+	case 2:
+		out_le16((u16 *)addr, val);
+		(void) in_le16((u16 *)addr);
+		break;
+	default:
+		out_le32((u32 *)addr, val);
+		(void) in_le32((u32 *)addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+	u4_pcie_read_config,
+	u4_pcie_write_config
+};
+
 #endif /* CONFIG_PPC64 */
 
 #ifdef CONFIG_PPC32
@@ -628,15 +737,36 @@ static void __init setup_u3_agp(struct pci_controller* hose)
 	hose->ops = &macrisc_pci_ops;
 	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
 	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
 	u3_agp = hose;
 }
 
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+	/* We currently only implement the "non-atomic" config space, to
+	 * be optimised later.
+	 */
+	hose->ops = &u4_pcie_pci_ops;
+	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+	/* The bus contains a bridge from root -> device, we need to
+	 * make it visible on bus 0 so that we pick the right type
+	 * of config cycles. If we didn't, we would have to force all
+	 * config cycles to be type 1. So we override the "bus-range"
+	 * property here
+	 */
+	hose->first_busno = 0x00;
+	hose->last_busno = 0xff;
+	u4_pcie = hose;
+}
+
 static void __init setup_u3_ht(struct pci_controller* hose)
 {
 	struct device_node *np = (struct device_node *)hose->arch_data;
+	struct pci_controller *other = NULL;
 	int i, cur;
 
+
 	hose->ops = &u3_ht_pci_ops;
 
 	/* We hard code the address because of the different size of
@@ -670,11 +800,20 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 
 	u3_ht = hose;
 
-	if (u3_agp == NULL) {
-		DBG("U3 has no AGP, using full resource range\n");
+	if (u3_agp != NULL)
+		other = u3_agp;
+	else if (u4_pcie != NULL)
+		other = u4_pcie;
+
+	if (other == NULL) {
+		DBG("U3/4 has no AGP/PCIE, using full resource range\n");
 		return;
 	}
 
+	/* Fixup bus range vs. PCIE */
+	if (u4_pcie)
+		hose->last_busno = u4_pcie->first_busno - 1;
+
 	/* We "remove" the AGP resources from the resources allocated to HT,
 	 * that is we create "holes". However, that code does assumptions
 	 * that so far happen to be true (cross fingers...), typically that
@@ -682,7 +821,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 */
 	cur = 0;
 	for (i=0; i<3; i++) {
-		struct resource *res = &u3_agp->mem_resources[i];
+		struct resource *res = &other->mem_resources[i];
 		if (res->flags != IORESOURCE_MEM)
 			continue;
 		/* We don't care about "fine" resources */
@@ -777,9 +916,13 @@ static int __init add_bridge(struct device_node *dev)
 		setup_u3_ht(hose);
 		disp_name = "U3-HT";
 		primary = 1;
+	} else if (device_is_compatible(dev, "u4-pcie")) {
+		setup_u4_pcie(hose);
+		disp_name = "U4-PCIE";
+		primary = 0;
 	}
-	printk(KERN_INFO "Found %s PCI host bridge.  Firmware bus number: %d->%d\n",
-		disp_name, hose->first_busno, hose->last_busno);
+	printk(KERN_INFO "Found %s PCI host bridge.  Firmware bus number:"
+	       " %d->%d\n", disp_name, hose->first_busno, hose->last_busno);
 #endif /* CONFIG_PPC64 */
 
 	/* 32 bits only bridges */
@@ -900,6 +1043,8 @@ void __init pmac_pci_init(void)
 		pci_setup_phb_io(u3_ht, 1);
 	if (u3_agp)
 		pci_setup_phb_io(u3_agp, 0);
+	if (u4_pcie)
+		pci_setup_phb_io(u4_pcie, 0);
 
 	/*
 	 * On ppc64, fixup the IO resources on our host bridges as
@@ -912,7 +1057,8 @@ void __init pmac_pci_init(void)
 
 	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
 	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions hopefully.
+	 * safe assumptions for now. We should do something better in the
+	 * future though
 	 */
 	if (u3_agp) {
 		struct device_node *np = u3_agp->arch_data;
@@ -920,7 +1066,6 @@ void __init pmac_pci_init(void)
 		for (np = np->child; np; np = np->sibling)
 			PCI_DN(np)->busno = 0xf0;
 	}
-
 	/* pmac_check_ht_link(); */
 
 	/* Tell pci.c to not use the common resource allocation mechanism */
@@ -1127,7 +1272,8 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev)
  good:
 	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
 	if ((progif & 5) != 5) {
-		printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+		printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n",
+		       pci_name(dev));
 		(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
 		if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
 		    (progif & 5) != 5)
@@ -1153,7 +1299,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
 		for (i = 0; i < 6; i++) {
 			dev->resource[i].start = dev->resource[i].end = 0;
 			dev->resource[i].flags = 0;
-			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+					       0);
 		}
 	} else {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
@@ -1162,7 +1309,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
 		for (i = 0; i < 5; i++) {
 			dev->resource[i].start = dev->resource[i].end = 0;
 			dev->resource[i].flags = 0;
-			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+			pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+					       0);
 		}
 	}
 }