diff options
| author | Mingkai Hu <Mingkai.hu@freescale.com> | 2011-06-28 15:52:34 +0800 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2011-07-08 00:21:32 -0500 |
| commit | 3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8 (patch) | |
| tree | 5218391b3566c3eb842a67807a2d8b442999f70b /arch/powerpc/platforms/85xx/Kconfig | |
| parent | 59f8df290acb6d279a690733a67b3902766999f3 (diff) | |
| download | blackbird-op-linux-3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8.tar.gz blackbird-op-linux-3fce1c0ba2b35b68135d8d8a3438f8c8272a01d8.zip | |
powerpc/85xx: Add p2040 RDB board support
P2040RDB Specification:
-----------------------
2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
128 Mbyte NOR flash single-chip memory
256 Kbit M24256 I2C EEPROM
16 Mbyte SPI memory
SD connector to interface with the SD memory card
dTSEC1: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC2: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC3: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC4: connected to the Vitesse RGMII PHY (VSC8641)
dTSEC5: connected to the Vitesse RGMII PHY (VSC8641)
I2C1: Real time clock, Temperature sensor
I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM
SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors
UART: supports two UARTs up to 115200 bps for console
USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces
PCIe:
- Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1
- Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/platforms/85xx/Kconfig')
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4706c71c9435..498534cd5265 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -171,6 +171,18 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config P2040_RDB + bool "Freescale P2040 RDB" + select DEFAULT_UIMAGE + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the P2040 RDB board + config P3041_DS bool "Freescale P3041 DS" select DEFAULT_UIMAGE |
