[POWERPC] Rewrite IO allocation & mapping on powerpc64

This rewrites pretty much from scratch the handling of MMIO and PIO
space allocations on powerpc64.  The main goals are:

 - Get rid of imalloc and use more common code where possible
 - Simplify the current mess so that PIO space is allocated and
   mapped in a single place for PCI bridges
 - Handle allocation constraints of PIO for all bridges including
   hot plugged ones within the 2GB space reserved for IO ports,
   so that devices on hotplugged busses will now work with drivers
   that assume IO ports fit in an int.
 - Cleanup and separate tracking of the ISA space in the reserved
   low 64K of IO space. No ISA -> Nothing mapped there.

I booted a cell blade with IDE on PIO and MMIO and a dual G5 so
far, that's it :-)

With this patch, all allocations are done using the code in
mm/vmalloc.c, though we use the low level __get_vm_area with
explicit start/stop constraints in order to manage separate
areas for vmalloc/vmap, ioremap, and PCI IOs.

This greatly simplifies a lot of things, as you can see in the
diffstat of that patch :-)

A new pair of functions pcibios_map/unmap_io_space() now replace
all of the previous code that used to manipulate PCI IOs space.
The allocation is done at mapping time, which is now called from
scan_phb's, just before the devices are probed (instead of after,
which is by itself a bug fix). The only other caller is the PCI
hotplug code for hot adding PCI-PCI bridges (slots).

imalloc is gone, as is the "sub-allocation" thing, but I do beleive
that hotplug should still work in the sense that the space allocation
is always done by the PHB, but if you unmap a child bus of this PHB
(which seems to be possible), then the code should properly tear
down all the HPTE mappings for that area of the PHB allocated IO space.

I now always reserve the first 64K of IO space for the bridge with
the ISA bus on it. I have moved the code for tracking ISA in a separate
file which should also make it smarter if we ever are capable of
hot unplugging or re-plugging an ISA bridge.

This should have a side effect on platforms like powermac where VGA IOs
will no longer work. This is done on purpose though as they would have
worked semi-randomly before. The idea at this point is to isolate drivers
that might need to access those and fix them by providing a proper
function to obtain an offset to the legacy IOs of a given bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 56 insertions, 0 deletions

diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index 2bfc4d7e1aa2..fdecb7f764d6 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -239,3 +239,59 @@ void pte_free_finish(void)
 	pte_free_submit(*batchp);
 	*batchp = NULL;
 }
+
+/**
+ * __flush_hash_table_range - Flush all HPTEs for a given address range
+ *                            from the hash table (and the TLB). But keeps
+ *                            the linux PTEs intact.
+ *
+ * @mm		: mm_struct of the target address space (generally init_mm)
+ * @start	: starting address
+ * @end         : ending address (not included in the flush)
+ *
+ * This function is mostly to be used by some IO hotplug code in order
+ * to remove all hash entries from a given address range used to map IO
+ * space on a removed PCI-PCI bidge without tearing down the full mapping
+ * since 64K pages may overlap with other bridges when using 64K pages
+ * with 4K HW pages on IO space.
+ *
+ * Because of that usage pattern, it's only available with CONFIG_HOTPLUG
+ * and is implemented for small size rather than speed.
+ */
+#ifdef CONFIG_HOTPLUG
+
+void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long end)
+{
+	unsigned long flags;
+
+	start = _ALIGN_DOWN(start, PAGE_SIZE);
+	end = _ALIGN_UP(end, PAGE_SIZE);
+
+	BUG_ON(!mm->pgd);
+
+	/* Note: Normally, we should only ever use a batch within a
+	 * PTE locked section. This violates the rule, but will work
+	 * since we don't actually modify the PTEs, we just flush the
+	 * hash while leaving the PTEs intact (including their reference
+	 * to being hashed). This is not the most performance oriented
+	 * way to do things but is fine for our needs here.
+	 */
+	local_irq_save(flags);
+	arch_enter_lazy_mmu_mode();
+	for (; start < end; start += PAGE_SIZE) {
+		pte_t *ptep = find_linux_pte(mm->pgd, start);
+		unsigned long pte;
+
+		if (ptep == NULL)
+			continue;
+		pte = pte_val(*ptep);
+		if (!(pte & _PAGE_HASHPTE))
+			continue;
+		hpte_need_flush(mm, start, ptep, pte, 0);
+	}
+	arch_leave_lazy_mmu_mode();
+	local_irq_restore(flags);
+}
+
+#endif /* CONFIG_HOTPLUG */