[POWERPC] Consolidate feature fixup code

There are currently two versions of the functions for applying the
feature fixups, one for CPU features and one for firmware features. In
addition, they are both in assembly and with separate implementations
for 32 and 64 bits. identify_cpu() is also implemented in assembly and
separately for 32 and 64 bits.

This patch replaces them with a pair of C functions. The call sites are
slightly moved on ppc64 as well to be called from C instead of from
assembly, though it's a very small change, and thus shouldn't cause any
problem.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 124 deletions

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index c70e20708a1f..21fd2c662a99 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -246,130 +246,6 @@ _GLOBAL(__flush_dcache_icache)
 	isync
 	blr
 
-/*
- * identify_cpu and calls setup_cpu
- * In:	r3 = base of the cpu_specs array
- *	r4 = address of cur_cpu_spec
- *	r5 = relocation offset
- */
-_GLOBAL(identify_cpu)
-	mfpvr	r7
-1:
-	lwz	r8,CPU_SPEC_PVR_MASK(r3)
-	and	r8,r8,r7
-	lwz	r9,CPU_SPEC_PVR_VALUE(r3)
-	cmplw	0,r9,r8
-	beq	1f
-	addi	r3,r3,CPU_SPEC_ENTRY_SIZE
-	b	1b
-1:
-	sub	r0,r3,r5
-	std	r0,0(r4)
-	ld	r4,CPU_SPEC_SETUP(r3)
-	cmpdi	0,r4,0
-	add	r4,r4,r5
-	beqlr
-	ld	r4,0(r4)
-	add	r4,r4,r5
-	mtctr	r4
-	/* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */
-	mr	r4,r3
-	mr	r3,r5
-	bctr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
-	/* Get CPU 0 features */
-	LOAD_REG_IMMEDIATE(r6,cur_cpu_spec)
-	sub	r6,r6,r3
-	ld	r4,0(r6)
-	sub	r4,r4,r3
-	ld	r4,CPU_SPEC_FEATURES(r4)
-	/* Get the fixup table */
-	LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup)
-	sub	r6,r6,r3
-	LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup)
-	sub	r7,r7,r3
-	/* Do the fixup */
-1:	cmpld	r6,r7
-	bgelr
-	addi	r6,r6,32
-	ld	r8,-32(r6)	/* mask */
-	and	r8,r8,r4
-	ld	r9,-24(r6)	/* value */
-	cmpld	r8,r9
-	beq	1b
-	ld	r8,-16(r6)	/* section begin */
-	ld	r9,-8(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	sub	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
-	beq	2f
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-2:	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
-
-/*
- * do_fw_ftr_fixups - goes through the list of firmware feature fixups
- * and writes nop's over sections of code that don't apply for this firmware.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_fw_ftr_fixups)
-	/* Get firmware features */
-	LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
-	sub	r6,r6,r3
-	ld	r4,0(r6)
-	/* Get the fixup table */
-	LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
-	sub	r6,r6,r3
-	LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
-	sub	r7,r7,r3
-	/* Do the fixup */
-1:	cmpld	r6,r7
-	bgelr
-	addi	r6,r6,32
-	ld	r8,-32(r6)	/* mask */
-	and	r8,r8,r4
-	ld	r9,-24(r6)	/* value */
-	cmpld	r8,r9
-	beq	1b
-	ld	r8,-16(r6)	/* section begin */
-	ld	r9,-8(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	sub	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-BEGIN_FTR_SECTION
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
-	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
 
 #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 /*