summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/crash.c
diff options
context:
space:
mode:
authorDavid Wilder <dwilder@us.ibm.com>2006-06-23 15:29:34 -0700
committerPaul Mackerras <paulus@samba.org>2006-06-28 15:18:52 +1000
commitc0ce7d0886cf0c2579c604eac41a7e125bc0e96d (patch)
treef31448371b4295e98753f1551178fdddb8d18b0e /arch/powerpc/kernel/crash.c
parent2cd90bc8fba8720ef7f3fdfd1e0c1a5397a18271 (diff)
downloadblackbird-op-linux-c0ce7d0886cf0c2579c604eac41a7e125bc0e96d.tar.gz
blackbird-op-linux-c0ce7d0886cf0c2579c604eac41a7e125bc0e96d.zip
[POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
With this patch, kdump uses the firmware soft-reset NMI for two purposes: 1) Initiate the kdump (take a crash dump) by issuing a soft-reset. 2) Break a CPU out of a deadlock condition that is detected during kdump processing. When a soft-reset is initiated each CPU will enter system_reset_exception() and set its corresponding bit in the global bit-array cpus_in_sr then call die(). When die() finds the CPU's bit set in cpu_in_sr crash_kexec() is called to initiate a crash dump. The first CPU to enter crash_kexec() is called the "crashing CPU". All other CPUs are "secondary CPUs". The secondary CPU's pass through to crash_kexec_secondary() and sleep. The crashing CPU waits for all CPUs to enter via soft-reset then boots the kdump kernel (see crash_soft_reset_check()) When the system crashes due to a panic or exception, crash_kexec() is called by panic() or die(). The crashing CPU sends an IPI to all other CPUs to notify them of the pending shutdown. If a CPU is in a deadlock or hung state with interrupts disabled, the IPI will not be delivered. The result being, that the kdump kernel is not booted. This problem is solved with the use of a firmware generated soft-reset. After the crashing_cpu has issued the IPI, it waits for 10 sec for all CPUs to enter crash_ipi_callback(). A CPU signifies its entry to crash_ipi_callback() by setting its corresponding bit in the cpus_in_crash bit array. After 10 sec, if one or more CPUs have not set their bit in cpus_in_crash we assume that the CPU(s) is deadlocked. The operator is then prompted to generate a soft-reset to break the deadlock. Each CPU enters the soft reset handler as described above. Two conditions must be handled at this point: 1) The system crashed because the operator generated a soft-reset. See 2) The system had crashed before the soft-reset was generated ( in the case of a Panic or oops). The first CPU to enter crash_kexec() uses the state of the kexec_lock to determine this state. If kexec_lock is already held then condition 2 is true and crash_kexec_secondary() is called, else; this CPU is flagged as the crashing CPU, the kexec_lock is acquired and crash_kexec() proceeds as described above. Each additional CPUs responding to the soft-reset will pass through crash_kexec() to kexec_secondary(). All secondary CPUs call crash_ipi_callback() readying them self's for the shutdown. When ready they clear their bit in cpus_in_sr. The crashing CPU waits in kexec_secondary() until all other CPUs have cleared their bits in cpus_in_sr. The kexec kernel boot is then started. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/kernel/crash.c')
-rw-r--r--arch/powerpc/kernel/crash.c147
1 files changed, 119 insertions, 28 deletions
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index e253a45dcf10..b537cfa4e09b 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,9 +24,11 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/machdep.h>
+#include <asm/kexec.h>
#include <asm/kdump.h>
#include <asm/lmb.h>
#include <asm/firmware.h>
@@ -41,6 +43,7 @@
/* This keeps a track of which one is crashing cpu. */
int crashing_cpu = -1;
+static cpumask_t cpus_in_crash = CPU_MASK_NONE;
static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
size_t data_len)
@@ -98,34 +101,66 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
}
#ifdef CONFIG_SMP
-static atomic_t waiting_for_crash_ipi;
+static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
void crash_ipi_callback(struct pt_regs *regs)
{
int cpu = smp_processor_id();
- if (cpu == crashing_cpu)
- return;
-
if (!cpu_online(cpu))
return;
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 1);
-
local_irq_disable();
+ if (!cpu_isset(cpu, cpus_in_crash))
+ crash_save_this_cpu(regs, cpu);
+ cpu_set(cpu, cpus_in_crash);
- crash_save_this_cpu(regs, cpu);
- atomic_dec(&waiting_for_crash_ipi);
+ /*
+ * Entered via soft-reset - could be the kdump
+ * process is invoked using soft-reset or user activated
+ * it if some CPU did not respond to an IPI.
+ * For soft-reset, the secondary CPU can enter this func
+ * twice. 1 - using IPI, and 2. soft-reset.
+ * Tell the kexec CPU that entered via soft-reset and ready
+ * to go down.
+ */
+ if (cpu_isset(cpu, cpus_in_sr)) {
+ cpu_clear(cpu, cpus_in_sr);
+ atomic_inc(&enter_on_soft_reset);
+ }
+
+ /*
+ * Starting the kdump boot.
+ * This barrier is needed to make sure that all CPUs are stopped.
+ * If not, soft-reset will be invoked to bring other CPUs.
+ */
+ while (!cpu_isset(crashing_cpu, cpus_in_crash))
+ cpu_relax();
+
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 1);
kexec_smp_wait();
/* NOTREACHED */
}
-static void crash_kexec_prepare_cpus(void)
+/*
+ * Wait until all CPUs are entered via soft-reset.
+ */
+static void crash_soft_reset_check(int cpu)
+{
+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+
+ cpu_clear(cpu, cpus_in_sr);
+ while (atomic_read(&enter_on_soft_reset) != ncpus)
+ cpu_relax();
+}
+
+
+static void crash_kexec_prepare_cpus(int cpu)
{
unsigned int msecs;
- atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
crash_send_ipi(crash_ipi_callback);
smp_wmb();
@@ -133,14 +168,13 @@ static void crash_kexec_prepare_cpus(void)
/*
* FIXME: Until we will have the way to stop other CPUSs reliabally,
* the crash CPU will send an IPI and wait for other CPUs to
- * respond. If not, proceed the kexec boot even though we failed to
- * capture other CPU states.
+ * respond.
* Delay of at least 10 seconds.
*/
- printk(KERN_ALERT "Sending IPI to other cpus...\n");
+ printk(KERN_EMERG "Sending IPI to other cpus...\n");
msecs = 10000;
- while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) {
- barrier();
+ while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+ cpu_relax();
mdelay(1);
}
@@ -149,18 +183,71 @@ static void crash_kexec_prepare_cpus(void)
/*
* FIXME: In case if we do not get all CPUs, one possibility: ask the
* user to do soft reset such that we get all.
- * IPI handler is already set by the panic cpu initially. Therefore,
- * all cpus could invoke this handler from die() and the panic CPU
- * will call machine_kexec() directly from this handler to do
- * kexec boot.
+ * Soft-reset will be used until better mechanism is implemented.
+ */
+ if (cpus_weight(cpus_in_crash) < ncpus) {
+ printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
+ ncpus - cpus_weight(cpus_in_crash));
+ printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
+ cpus_in_sr = CPU_MASK_NONE;
+ atomic_set(&enter_on_soft_reset, 0);
+ while (cpus_weight(cpus_in_crash) < ncpus)
+ cpu_relax();
+ }
+ /*
+ * Make sure all CPUs are entered via soft-reset if the kdump is
+ * invoked using soft-reset.
*/
- if (atomic_read(&waiting_for_crash_ipi))
- printk(KERN_ALERT "done waiting: %d cpus not responding\n",
- atomic_read(&waiting_for_crash_ipi));
+ if (cpu_isset(cpu, cpus_in_sr))
+ crash_soft_reset_check(cpu);
/* Leave the IPI callback set */
}
+
+/*
+ * This function will be called by secondary cpus or by kexec cpu
+ * if soft-reset is activated to stop some CPUs.
+ */
+void crash_kexec_secondary(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned long flags;
+ int msecs = 5;
+
+ local_irq_save(flags);
+ /* Wait 5ms if the kexec CPU is not entered yet. */
+ while (crashing_cpu < 0) {
+ if (--msecs < 0) {
+ /*
+ * Either kdump image is not loaded or
+ * kdump process is not started - Probably xmon
+ * exited using 'x'(exit and recover) or
+ * kexec_should_crash() failed for all running tasks.
+ */
+ cpu_clear(cpu, cpus_in_sr);
+ local_irq_restore(flags);
+ return;
+ }
+ mdelay(1);
+ cpu_relax();
+ }
+ if (cpu == crashing_cpu) {
+ /*
+ * Panic CPU will enter this func only via soft-reset.
+ * Wait until all secondary CPUs entered and
+ * then start kexec boot.
+ */
+ crash_soft_reset_check(cpu);
+ cpu_set(crashing_cpu, cpus_in_crash);
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 0);
+ machine_kexec(kexec_crash_image);
+ /* NOTREACHED */
+ }
+ crash_ipi_callback(regs);
+}
+
#else
-static void crash_kexec_prepare_cpus(void)
+static void crash_kexec_prepare_cpus(int cpu)
{
/*
* move the secondarys to us so that we can copy
@@ -171,6 +258,10 @@ static void crash_kexec_prepare_cpus(void)
smp_release_cpus();
}
+void crash_kexec_secondary(struct pt_regs *regs)
+{
+ cpus_in_sr = CPU_MASK_NONE;
+}
#endif
void default_machine_crash_shutdown(struct pt_regs *regs)
@@ -199,14 +290,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
desc->handler->disable(irq);
}
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 0);
-
/*
* Make a note of crashing cpu. Will be used in machine_kexec
* such that another IPI will not be sent.
*/
crashing_cpu = smp_processor_id();
- crash_kexec_prepare_cpus();
crash_save_this_cpu(regs, crashing_cpu);
+ crash_kexec_prepare_cpus(crashing_cpu);
+ cpu_set(crashing_cpu, cpus_in_crash);
+ if (ppc_md.kexec_cpu_down)
+ ppc_md.kexec_cpu_down(1, 0);
}
OpenPOWER on IntegriCloud