Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix crashkernel= handling when no crashkernel= specified
  [POWERPC] Make emergency stack safe for current_thread_info() use
  [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
  [POWERPC] spufs: trace spu_acquire_saved events
  [POWERPC] spufs: fix marker name for find_victim
  [POWERPC] spufs: add marker for destroy_spu_context
  [POWERPC] spufs: add sputrace marker parameter names
  [POWERPC] spufs: add context switch notification log
  [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
  [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
  [POWERPC] mpc5200: Fix FEC error handling on FIFO errors
  [POWERPC] mpc5200: add Phytec pcm030 board support
  [POWERPC] mpc5200: add gpiolib support for mpc5200
  [POWERPC] mpc5200: add interrupt type function
  [POWERPC] mpc5200: Fix unterminated of_device_id table

1 files changed, 60 insertions, 58 deletions

diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 2b0dde058f8e..9e3c921be164 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -10,6 +10,8 @@
  * option) any later version.
  */
 
+/dts-v1/;
+
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
@@ -23,10 +25,10 @@
 		PowerPC,5200@0 {
 			device_type = "cpu";
 			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <4000>;		// L1, 16K
-			i-cache-size = <4000>;		// L1, 16K
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
 			timebase-frequency = <0>;	// from bootloader
 			bus-frequency = <0>;		// from bootloader
 			clock-frequency = <0>;		// from bootloader
@@ -35,21 +37,21 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 04000000>;	// 64MB
+		reg = <0x00000000 0x04000000>;	// 64MB
 	};
 
 	soc5200@f0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 f0000000 0000c000>;
-		reg = <f0000000 00000100>;
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
 		bus-frequency = <0>;		// from bootloader
 		system-frequency = <0>;		// from bootloader
 
 		cdm@200 {
 			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <200 38>;
+			reg = <0x200 0x38>;
 		};
 
 		mpc5200_pic: interrupt-controller@500 {
@@ -57,12 +59,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <500 80>;
+			reg = <0x500 0x80>;
 		};
 
 		timer@600 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <600 10>;
+			reg = <0x600 0x10>;
 			interrupts = <1 9 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl,has-wdt;
@@ -70,118 +72,118 @@
 
 		timer@610 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <610 10>;
-			interrupts = <1 a 0>;
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@620 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <620 10>;
-			interrupts = <1 b 0>;
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@630 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <630 10>;
-			interrupts = <1 c 0>;
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@640 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <640 10>;
-			interrupts = <1 d 0>;
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@650 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <650 10>;
-			interrupts = <1 e 0>;
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		motionpro-led@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
-			reg = <660 10>;
-			interrupts = <1 f 0>;
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
 			interrupt-parent = <&mpc5200_pic>;
-			blink-delay = <64>; // 100 msec
+			blink-delay = <100>; // 100 msec
 		};
 
 		motionpro-led@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
-			reg = <670 10>;
-			interrupts = <1 10 0>;
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		rtc@800 {	// Real time clock
 			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <800 100>;
+			reg = <0x800 0x100>;
 			interrupts = <1 5 0 1 6 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-		mscan@980 {
+		can@980 {
 			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 12 0>;
+			interrupts = <2 18 0>;
 			interrupt-parent = <&mpc5200_pic>;
-			reg = <980 80>;
+			reg = <0x980 0x80>;
 		};
 
 		gpio@b00 {
 			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <b00 40>;
+			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <c00 40>;
+			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		spi@f00 {
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <f00 20>;
-			interrupts = <2 d 0 2 e 0>;
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		usb@1000 {
 			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <1000 ff>;
+			reg = <0x1000 0xff>;
 			interrupts = <2 6 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		dma-controller@1200 {
 			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <1200 80>;
+			reg = <0x1200 0x80>;
 			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 a 0  3 b 0
-			              3 c 0  3 d 0  3 e 0  3 f 0>;
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		xlb@1f00 {
 			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <1f00 100>;
+			reg = <0x1f00 0x100>;
 		};
 
 		serial@2000 {		// PSC1
 			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			port-number = <0>;  // Logical port assignment
-			reg = <2000 100>;
+			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
@@ -190,7 +192,7 @@
 		spi@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 			cell-index = <1>;
-			reg = <2200 100>;
+			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
@@ -200,15 +202,15 @@
 			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			port-number = <4>;  // Logical port assignment
-			reg = <2800 100>;
-			interrupts = <2 c 0>;
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 400>;
+			reg = <0x3000 0x400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
@@ -219,7 +221,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 			interrupt-parent = <&mpc5200_pic>;
 
@@ -231,7 +233,7 @@
 
 		ata@3a00 {
 			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <3a00 100>;
+			reg = <0x3a00 0x100>;
 			interrupts = <2 7 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
@@ -240,21 +242,21 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <3d40 40>;
-			interrupts = <2 10 0>;
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
 
 			rtc@68 {
 				device_type = "rtc";
 				compatible = "dallas,ds1339";
-				reg = <68>;
+				reg = <0x68>;
 			};
 		};
 
 		sram@8000 {
 			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <8000 4000>;
+			reg = <0x8000 0x4000>;
 		};
 	};
 
@@ -262,15 +264,15 @@
 		compatible = "fsl,lpb";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <0 0 ff000000 01000000
-			  1 0 50000000 00010000
-			  2 0 50010000 00010000
-			  3 0 50020000 00010000>;
+		ranges = <0 0 0xff000000 0x01000000
+			  1 0 0x50000000 0x00010000
+			  2 0 0x50010000 0x00010000
+			  3 0 0x50020000 0x00010000>;
 
 		// 8-bit DualPort SRAM on LocalPlus Bus CS1
 		kollmorgen@1,0 {
 			compatible = "promess,motionpro-kollmorgen";
-			reg = <1 0 10000>;
+			reg = <1 0 0x10000>;
 			interrupts = <1 1 0>;
 			interrupt-parent = <&mpc5200_pic>;
 		};
@@ -278,13 +280,13 @@
 		// 8-bit board CPLD on LocalPlus Bus CS2
 		cpld@2,0 {
 			compatible = "promess,motionpro-cpld";
-			reg = <2 0 10000>;
+			reg = <2 0 0x10000>;
 		};
 
 		// 8-bit custom Anybus Module on LocalPlus Bus CS3
 		anybus@3,0 {
 			compatible = "promess,motionpro-anybus";
-			reg = <3 0 10000>;
+			reg = <3 0 0x10000>;
 		};
 		pro_module_general@3,0 {
 			compatible = "promess,pro_module_general";
@@ -292,13 +294,13 @@
 		};
 		pro_module_dio@3,800 {
 			compatible = "promess,pro_module_dio";
-			reg = <3 800 2>;
+			reg = <3 0x800 2>;
 		};
 
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
 			compatible = "cfi-flash";
-			reg = <0 0 01000000>;
+			reg = <0 0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#size-cells = <1>;