diff options
author | Kumar Gala <galak@kernel.crashing.org> | 2011-11-10 08:05:16 -0600 |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2011-11-24 02:01:36 -0600 |
commit | 1a23b4a64a6ede84eae820f35e02a869bdf09b77 (patch) | |
tree | 56624a67860864ba6ef5eb126490884140bc8361 /arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | |
parent | 53e23dcb1894604ac8377fd4293d29116b9ae904 (diff) | |
download | blackbird-op-linux-1a23b4a64a6ede84eae820f35e02a869bdf09b77.tar.gz blackbird-op-linux-1a23b4a64a6ede84eae820f35e02a869bdf09b77.zip |
powerpc/85xx: Rework MPC8568MDS device tree
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Moved to a standard 2 #address-cells & #size-cells at top-level
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Removed CPU properties setup by u-boot to match other .dts
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
and moved PCI device IRQs down to virtual bridge level
* Dropping "fsl,mpc8568-IP..." from compatibles for standard blocks
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi')
-rw-r--r-- | arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi new file mode 100644 index 000000000000..6a9cca865774 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi @@ -0,0 +1,265 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + sleep = <&pmc 0x80000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + #address-cells = <2>; + #size-cells = <2>; + compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta"; + interrupts = <48 2 0 0 /* error */ + 49 2 0 0 /* bell_outb */ + 50 2 0 0 /* bell_inb */ + 53 2 0 0 /* msg1_tx */ + 54 2 0 0 /* msg1_rx */ + 55 2 0 0 /* msg2_tx */ + 56 2 0 0 /* msg2_rx */>; + sleep = <&pmc 0x00080000 /* controller */ + &pmc 0x00040000>; /* message unit */ +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8568-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8568-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8568-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8568-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + dma@21300 { + sleep = <&pmc 0x00000400>; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + sleep = <&pmc 0x00000080>; + }; + +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + sleep = <&pmc 0x00000040>; + }; + + par_io@e0100 { + reg = <0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec2.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x10000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x10000>; + }; + }; +}; |