MIPS: MSP71xx: Platform support for MSP on-chip USB controller.

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: Anoop P A <anoop.pa@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/2043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 176 insertions, 63 deletions

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmc-sierra/msp71xx/msp_usb.c
index 0ee01e359dd8..9a1aef89bd4c 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_usb.c
@@ -1,7 +1,7 @@
 /*
  * The setup file for USB related hardware on PMC-Sierra MSP processors.
  *
- * Copyright 2006-2007 PMC-Sierra, Inc.
+ * Copyright 2006 PMC-Sierra, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,8 +23,8 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
 
-#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
@@ -34,40 +34,56 @@
 #include <msp_regs.h>
 #include <msp_int.h>
 #include <msp_prom.h>
+#include <msp_usb.h>
+
 
 #if defined(CONFIG_USB_EHCI_HCD)
-static struct resource msp_usbhost_resources [] = {
-	[0] = {
-		.start	= MSP_USB_BASE_START,
-		.end	= MSP_USB_BASE_END,
-		.flags 	= IORESOURCE_MEM,
+static struct resource msp_usbhost0_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start  = MSP_USB0_HS_START,
+		.end    = MSP_USB0_HS_END,
+		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= MSP_INT_USB,
-		.end	= MSP_INT_USB,
-		.flags	= IORESOURCE_IRQ,
+		.start  = MSP_INT_USB,
+		.end    = MSP_INT_USB,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB0_MAB_START,
+		.end	= MSP_USB0_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB0_ID_START,
+		.end	= MSP_USB0_ID_END,
+		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static u64 msp_usbhost_dma_mask = DMA_BIT_MASK(32);
+static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
 
-static struct platform_device msp_usbhost_device = {
-	.name	= "pmcmsp-ehci",
-	.id	= 0,
+static struct mspusb_device msp_usbhost0_device = {
 	.dev	= {
-		.dma_mask = &msp_usbhost_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.name	= "pmcmsp-ehci",
+		.id	= 0,
+		.dev	= {
+			.dma_mask = &msp_usbhost0_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources  = ARRAY_SIZE(msp_usbhost0_resources),
+		.resource       = msp_usbhost0_resources,
 	},
-	.num_resources 	= ARRAY_SIZE(msp_usbhost_resources),
-	.resource	= msp_usbhost_resources,
 };
-#endif /* CONFIG_USB_EHCI_HCD */
 
-#if defined(CONFIG_USB_GADGET)
-static struct resource msp_usbdev_resources [] = {
-	[0] = {
-		.start	= MSP_USB_BASE,
-		.end	= MSP_USB_BASE_END,
+/* MSP7140/MSP82XX has two USB2 hosts. */
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+static u64 msp_usbhost1_dma_mask = 0xffffffffUL;
+
+static struct resource msp_usbhost1_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start	= MSP_USB1_HS_START,
+		.end	= MSP_USB1_HS_END,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -75,76 +91,173 @@ static struct resource msp_usbdev_resources [] = {
 		.end	= MSP_INT_USB,
 		.flags	= IORESOURCE_IRQ,
 	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB1_MAB_START,
+		.end	= MSP_USB1_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB1_ID_START,
+		.end	= MSP_USB1_ID_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mspusb_device msp_usbhost1_device = {
+	.dev	= {
+		.name	= "pmcmsp-ehci",
+		.id	= 1,
+		.dev	= {
+			.dma_mask = &msp_usbhost1_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources	= ARRAY_SIZE(msp_usbhost1_resources),
+		.resource	= msp_usbhost1_resources,
+	},
 };
+#endif /* CONFIG_MSP_HAS_DUAL_USB */
+#endif /* CONFIG_USB_EHCI_HCD */
 
-static u64 msp_usbdev_dma_mask = DMA_BIT_MASK(32);
+#if defined(CONFIG_USB_GADGET)
+static struct resource msp_usbdev0_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start  = MSP_USB0_HS_START,
+		.end    = MSP_USB0_HS_END,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = MSP_INT_USB,
+		.end    = MSP_INT_USB,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB0_MAB_START,
+		.end	= MSP_USB0_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB0_ID_START,
+		.end	= MSP_USB0_ID_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
 
-static struct platform_device msp_usbdev_device = {
-	.name	= "msp71xx_udc",
-	.id	= 0,
+static u64 msp_usbdev_dma_mask = 0xffffffffUL;
+
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev0_device = {
 	.dev	= {
-		.dma_mask = &msp_usbdev_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.name	= "msp71xx_udc",
+		.id	= 0,
+		.dev	= {
+			.dma_mask = &msp_usbdev_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources  = ARRAY_SIZE(msp_usbdev0_resources),
+		.resource       = msp_usbdev0_resources,
 	},
-	.num_resources	= ARRAY_SIZE(msp_usbdev_resources),
-	.resource	= msp_usbdev_resources,
 };
-#endif /* CONFIG_USB_GADGET */
 
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
-static struct platform_device *msp_devs[1];
-#endif
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+static struct resource msp_usbdev1_resources[] = {
+	[0] = { /* EHCI-HS operational and capabilities registers */
+		.start  = MSP_USB1_HS_START,
+		.end    = MSP_USB1_HS_END,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = MSP_INT_USB,
+		.end    = MSP_INT_USB,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = { /* MSBus-to-AMBA bridge register space */
+		.start	= MSP_USB1_MAB_START,
+		.end	= MSP_USB1_MAB_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[3] = { /* Identification and general hardware parameters */
+		.start	= MSP_USB1_ID_START,
+		.end	= MSP_USB1_ID_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
 
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev1_device = {
+	.dev	= {
+		.name	= "msp71xx_udc",
+		.id	= 0,
+		.dev	= {
+			.dma_mask = &msp_usbdev_dma_mask,
+			.coherent_dma_mask = 0xffffffffUL,
+		},
+		.num_resources  = ARRAY_SIZE(msp_usbdev1_resources),
+		.resource       = msp_usbdev1_resources,
+	},
+};
+
+#endif /* CONFIG_MSP_HAS_DUAL_USB */
+#endif /* CONFIG_USB_GADGET */
 
 static int __init msp_usb_setup(void)
 {
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
-	char *strp;
-	char envstr[32];
-	unsigned int val = 0;
-	int result = 0;
+	char		*strp;
+	char		envstr[32];
+	struct platform_device *msp_devs[NUM_USB_DEVS];
+	unsigned int val;
 
+	/* construct environment name usbmode */
+	/* set usbmode <host/device> as pmon environment var */
 	/*
-	 * construct environment name usbmode
-	 * set usbmode <host/device> as pmon environment var
+	 * Could this perhaps be integrated into the "features" env var?
+	 * Use the features key "U", and follow with "H" for host-mode,
+	 * "D" for device-mode.  If it works for Ethernet, why not USB...
+	 *  -- hammtrev, 2007/03/22
 	 */
 	snprintf((char *)&envstr[0], sizeof(envstr), "usbmode");
 
-#if defined(CONFIG_USB_EHCI_HCD)
-	/* default to host mode */
+	/* set default host mode */
 	val = 1;
-#endif
 
 	/* get environment string */
 	strp = prom_getenv((char *)&envstr[0]);
 	if (strp) {
+		/* compare string */
 		if (!strcmp(strp, "device"))
 			val = 0;
 	}
 
 	if (val) {
 #if defined(CONFIG_USB_EHCI_HCD)
-		/* get host mode device */
-		msp_devs[0] = &msp_usbhost_device;
-		ppfinit("platform add USB HOST done %s.\n",
-			    msp_devs[0]->name);
-
-		result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
-#endif /* CONFIG_USB_EHCI_HCD */
-	}
+		msp_devs[0] = &msp_usbhost0_device.dev;
+		ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+		msp_devs[1] = &msp_usbhost1_device.dev;
+		ppfinit("platform add USB HOST done %s.\n", msp_devs[1]->name);
+#endif
+#else
+		ppfinit("%s: echi_hcd not supported\n", __FILE__);
+#endif  /* CONFIG_USB_EHCI_HCD */
+	} else {
 #if defined(CONFIG_USB_GADGET)
-	else {
 		/* get device mode structure */
-		msp_devs[0] = &msp_usbdev_device;
-		ppfinit("platform add USB DEVICE done %s.\n",
-			    msp_devs[0]->name);
-
-		result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
+		msp_devs[0] = &msp_usbdev0_device.dev;
+		ppfinit("platform add USB DEVICE done %s.\n"
+					, msp_devs[0]->name);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+		msp_devs[1] = &msp_usbdev1_device.dev;
+		ppfinit("platform add USB DEVICE done %s.\n"
+					, msp_devs[1]->name);
+#endif
+#else
+		ppfinit("%s: usb_gadget not supported\n", __FILE__);
+#endif  /* CONFIG_USB_GADGET */
 	}
-#endif /* CONFIG_USB_GADGET */
-#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */
+	/* add device */
+	platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
 
-	return result;
+	return 0;
 }
 
 subsys_initcall(msp_usb_setup);
+#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */