Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

9 files changed, 977 insertions, 0 deletions

diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile
new file mode 100644
index 000000000000..e5f1cb086973
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Momentum Computer's Ocelot-G board.
+#
+
+obj-y	 		+= int-handler.o irq.o gt-irq.o prom.o reset.o setup.o
+obj-$(CONFIG_KGDB)	+= dbg_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
new file mode 100644
index 000000000000..8720bccfdea2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -0,0 +1,126 @@
+#include <linux/config.h>
+
+#ifdef CONFIG_KGDB
+
+#include <asm/serial.h> /* For the serial port location and base baud */
+
+/* --- CONFIG --- */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [jsun] we use the second serial port for kdb */
+#define         BASE                    OCELOT_SERIAL1_BASE
+#define         MAX_BAUD                OCELOT_BASE_BAUD
+
+/* === END OF CONFIG === */
+
+#define         REG_OFFSET              4
+
+/* register offset */
+#define         OFS_RCV_BUFFER          0
+#define         OFS_TRANS_HOLD          0
+#define         OFS_SEND_BUFFER         0
+#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
+#define         OFS_INTR_ID             (2*REG_OFFSET)
+#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
+#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
+#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
+#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
+#define         OFS_LINE_STATUS         (5*REG_OFFSET)
+#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
+#define         OFS_RS232_INPUT         (6*REG_OFFSET)
+#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
+
+#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
+#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
+#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+	/* disable interrupts */
+	UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+	/* set up buad rate */
+	{
+		uint32 divisor;
+
+		/* set DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+		/* set divisor */
+		divisor = MAX_BAUD / baud;
+		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+		/* clear DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+	}
+
+	/* set data format */
+	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_38400,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+	return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_38400,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+	UART16550_WRITE(OFS_SEND_BUFFER, byte);
+	return 1;
+}
+
+#endif
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
new file mode 100644
index 000000000000..d0b5c9dd0ea4
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -0,0 +1,214 @@
+/*
+ *
+ * Copyright 2002 Momentum Computer
+ * Author: mdharm@momenco.com
+ *
+ * arch/mips/momentum/ocelot_g/gt_irq.c
+ *     Interrupt routines for gt64240.  Currently it only handles timer irq.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/gt64240.h>
+#include <asm/io.h>
+
+unsigned long bus_clock;
+
+/*
+ * These are interrupt handlers for the GT on-chip interrupts.  They
+ * all come in to the MIPS on a single interrupt line, and have to
+ * be handled and ack'ed differently than other MIPS interrupts.
+ */
+
+#if CURRENTLY_UNUSED
+
+struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH];
+void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr);
+
+/*
+ * Hooks IRQ handler to the system. When the system is interrupted
+ * the interrupt service routine is called.
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ *             are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num   - Indicates which bit number in the cause register
+ * isr_ptr   - Pointer to the interrupt service routine
+ */
+void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
+{
+	irq_handlers[int_cause][bit_num].routine = isr_ptr;
+}
+
+
+/*
+ * Enables the IRQ on Galileo Chip
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ *             are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num   - Indicates which bit number in the cause register
+ *
+ * Outputs :
+ * 1 if succesful, 0 if failure
+ */
+int enable_galileo_irq(int int_cause, int bit_num)
+{
+	if (int_cause == INT_CAUSE_MAIN)
+		SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num));
+	else if (int_cause == INT_CAUSE_HIGH)
+		SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
+			     (1 << bit_num));
+	else
+		return 0;
+
+	return 1;
+}
+
+/*
+ * Disables the IRQ on Galileo Chip
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ *             are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num   - Indicates which bit number in the cause register
+ *
+ * Outputs :
+ * 1 if succesful, 0 if failure
+ */
+int disable_galileo_irq(int int_cause, int bit_num)
+{
+	if (int_cause == INT_CAUSE_MAIN)
+		RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER,
+			       (1 << bit_num));
+	else if (int_cause == INT_CAUSE_HIGH)
+		RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
+			       (1 << bit_num));
+	else
+		return 0;
+	return 1;
+}
+#endif				/*  UNUSED  */
+
+/*
+ * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#.
+ *
+ * We route the timer interrupt to P0_INT# (IRQ 6), and that's all this
+ * routine can handle, for now.
+ *
+ * In the future, we'll route more interrupts to this pin, and that's why
+ * we keep this particular structure in the function.
+ */
+
+static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
+{
+	uint32_t irq_src, irq_src_mask;
+	int handled;
+
+	/* get the low interrupt cause register */
+	irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
+
+	/* get the mask register for this pin */
+	irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
+
+	/* mask off only the interrupts we're interested in */
+	irq_src = irq_src & irq_src_mask;
+
+	handled = IRQ_NONE;
+
+	/* Check for timer interrupt */
+	if (irq_src & 0x00000100) {
+		handled = IRQ_HANDLED;
+		irq_src &= ~0x00000100;
+
+		/* Clear any pending cause bits */
+		MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+
+		/* handle the timer call */
+		do_timer(regs);
+#ifndef CONFIG_SMP
+		update_process_times(user_mode(regs));
+#endif
+	}
+
+	if (irq_src) {
+		printk(KERN_INFO
+		       "UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
+		       irq_src);
+	}
+
+	return handled;
+}
+
+/*
+ * Initializes timer using galileo's built in timer.
+ */
+
+/*
+ * This will ignore the standard MIPS timer interrupt handler
+ * that is passed in as *irq (=irq0 in ../kernel/time.c).
+ * We will do our own timer interrupt handling.
+ */
+void gt64240_time_init(void)
+{
+	static struct irqaction timer;
+
+	/* Stop the timer -- we'll use timer #0 */
+	MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
+
+	/* Load timer value for 100 Hz */
+	MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
+
+	/*
+	 * Create the IRQ structure entry for the timer.  Since we're too early
+	 * in the boot process to use the "request_irq()" call, we'll hard-code
+	 * the values to the correct interrupt line.
+	 */
+	timer.handler = &gt64240_p0int_irq;
+	timer.flags = SA_SHIRQ | SA_INTERRUPT;
+	timer.name = "timer";
+	timer.dev_id = NULL;
+	timer.next = NULL;
+	timer.mask = 0;
+	irq_desc[6].action = &timer;
+
+	enable_irq(6);
+
+	/* Clear any pending cause bits */
+	MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+
+	/* Enable the interrupt for timer 0 */
+	MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
+
+	/* Enable the timer interrupt for GT-64240 pin P0_INT# */
+	MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
+
+	/* Configure and start the timer */
+	MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
+}
+
+void gt64240_irq_init(void)
+{
+#if CURRENTLY_UNUSED
+	int i, j;
+
+	/* Reset irq handlers pointers to NULL */
+	for (i = 0; i < MAX_CAUSE_REGS; i++) {
+		for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) {
+			irq_handlers[i][j].next = NULL;
+			irq_handlers[i][j].sync = 0;
+			irq_handlers[i][j].routine = NULL;
+			irq_handlers[i][j].data = NULL;
+		}
+	}
+#endif
+}
diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S
new file mode 100644
index 000000000000..772e8f713176
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/int-handler.S
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ocelot board.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+		.align	5
+		NESTED(ocelot_handle_int, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0, CP0_CAUSE
+		mfc0	t2, CP0_STATUS
+
+		and	t0, t2
+
+		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
+		bnez	t1, ll_pri_enet_irq
+		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
+		bnez	t1, ll_sec_enet_irq
+		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
+		bnez	t1, ll_uart_irq
+		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
+		bnez	t1, ll_cpci_irq
+		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
+		bnez	t1, ll_galileo_p0_irq
+		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
+		bnez	t1, ll_cputimer_irq
+
+                /* now look at the extended interrupts */
+		mfc0	t0, CP0_CAUSE
+		cfc0	t1, CP0_S1_INTCONTROL
+
+		/* shift the mask 8 bits left to line up the bits */
+		 sll	t2, t1, 8
+
+		 and	t0, t2
+		 srl	t0, t0, 16
+
+		 andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
+		bnez	t1, ll_galileo_p1_irq
+		 andi	t1, t0, STATUSF_IP9	/* int7 hardware line */
+		bnez	t1, ll_pmc_irq
+		 andi	t1, t0, STATUSF_IP10	/* int8 hardware line */
+		bnez	t1, ll_cpci_abcd_irq
+		 andi	t1, t0, STATUSF_IP11	/* int9 hardware line */
+		bnez	t1, ll_testpoint_irq
+
+		.set	reorder
+
+		/* wrong alarm or masked ... */
+		j	spurious_interrupt
+		nop
+		END(ocelot_handle_int)
+
+		.align	5
+ll_pri_enet_irq:
+		li	a0, 2
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_sec_enet_irq:
+		li	a0, 3
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_uart_irq:
+		li	a0, 4
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cpci_irq:
+		li	a0, 5
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_galileo_p0_irq:
+		li	a0, 6
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cputimer_irq:
+		li	a0, 7
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_galileo_p1_irq:
+		li	a0, 8
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_pmc_irq:
+		li	a0, 9
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cpci_abcd_irq:
+		li	a0, 10
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_testpoint_irq:
+		li	a0, 11
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c
new file mode 100644
index 000000000000..5eb85b164205
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/irq.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+extern asmlinkage void ocelot_handle_int(void);
+extern void gt64240_irq_init(void);
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM);
+	local_irq_disable();
+
+	/* Sets the first-level interrupt dispatcher. */
+	set_except_vector(0, ocelot_handle_int);
+	mips_cpu_irq_init(0);
+	rm7k_cpu_irq_init(8);
+
+	gt64240_irq_init();
+}
diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h
new file mode 100644
index 000000000000..fcb8275e219d
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h
@@ -0,0 +1,30 @@
+/*
+ * Ocelot Board Register Definitions
+ *
+ * (C) 2001 Red Hat, Inc.
+ *
+ * GPL'd
+ */
+#ifndef __MOMENCO_OCELOT_PLD_H__
+#define __MOMENCO_OCELOT_PLD_H__
+
+#define OCELOT_CS0_ADDR (0xfc000000)
+
+#define OCELOT_REG_BOARDREV (0)
+#define OCELOT_REG_PLD1_ID (1)
+#define OCELOT_REG_PLD2_ID (2)
+#define OCELOT_REG_RESET_STATUS (3)
+#define OCELOT_REG_BOARD_STATUS (4)
+#define OCELOT_REG_CPCI_ID (5)
+#define OCELOT_REG_I2C_CTRL (8)
+#define OCELOT_REG_EEPROM_MODE (9)
+#define OCELOT_REG_INTMASK (10)
+#define OCELOT_REG_INTSTATUS (11)
+#define OCELOT_REG_INTSET (12)
+#define OCELOT_REG_INTCLR (13)
+
+#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y)
+#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x)
+
+
+#endif /* __MOMENCO_OCELOT_PLD_H__ */
diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c
new file mode 100644
index 000000000000..6b4f577c2757
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/prom.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+#include <asm/gt64240.h>
+
+#include "ocelot_pld.h"
+
+struct callvectors* debug_vectors;
+
+extern unsigned long marvell_base;
+extern unsigned long bus_clock;
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+const char *get_system_type(void)
+{
+	return "Momentum Ocelot";
+}
+
+void __init prom_init(void)
+{
+	int argc = fw_arg0;
+	char **arg = (char **) fw_arg1;
+	char **env = (char **) fw_arg2;
+	struct callvectors *cv = (struct callvectors *) fw_arg3;
+	int i;
+
+	/* save the PROM vectors for debugging use */
+	debug_vectors = cv;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < argc; i++) {
+		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, arg[i]);
+		strcat(arcs_cmdline, " ");
+	}
+
+	mips_machgroup = MACH_GROUP_MOMENCO;
+	mips_machtype = MACH_MOMENCO_OCELOT_G;
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+	/* get the base MAC address for on-board ethernet ports */
+	memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
+#endif
+
+	while (*env) {
+		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+			marvell_base = simple_strtol(*env + strlen("gtbase="),
+							NULL, 16);
+		}
+		if (strncmp("busclock", *env, strlen("busclock")) == 0) {
+			bus_clock = simple_strtol(*env + strlen("busclock="),
+							NULL, 10);
+		}
+		env++;
+	}
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
diff --git a/arch/mips/momentum/ocelot_g/reset.c b/arch/mips/momentum/ocelot_g/reset.c
new file mode 100644
index 000000000000..3fd499adf4cf
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/reset.c
@@ -0,0 +1,47 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 2001 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <linux/delay.h>
+
+void momenco_ocelot_restart(char *command)
+{
+	void *nvram = ioremap_nocache(0x2c807000, 0x1000);
+
+	if (!nvram) {
+		printk(KERN_NOTICE "ioremap of reset register failed\n");
+		return;
+	}
+	writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
+					assert reset in 1/16 second */
+	mdelay(10+(1000/16));
+	iounmap(nvram);
+	printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_ocelot_halt(void)
+{
+	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+	while (1)
+		__asm__(".set\tmips3\n\t"
+	                "wait\n\t"
+			".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+	momenco_ocelot_halt();
+}
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
new file mode 100644
index 000000000000..38a78ab8c830
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -0,0 +1,266 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001  Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ *   mdharm@momenco.com
+ *
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/gt64240.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <linux/bootmem.h>
+
+#include "ocelot_pld.h"
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+unsigned long marvell_base;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+extern void gt64240_time_init(void);
+extern void momenco_ocelot_irq_setup(void);
+
+static char reset_reason;
+
+static unsigned long ENTRYLO(unsigned long paddr)
+{
+	return ((paddr & PAGE_MASK) |
+	       (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+		_CACHE_UNCACHED)) >> 6;
+}
+
+/* setup code for a handoff from a version 2 PMON 2000 PROM */
+void PMON_v2_setup(void)
+{
+	/* A wired TLB entry for the GT64240 and the serial port. The
+	   GT64240 is going to be hit on every IRQ anyway - there's
+	   absolutely no point in letting it be a random TLB entry, as
+	   it'll just cause needless churning of the TLB. And we use
+	   the other half for the serial port, which is just a PITA
+	   otherwise :)
+
+		Device			Physical	Virtual
+		GT64240 Internal Regs	0xf4000000	0xe0000000
+		UARTs (CS2)		0xfd000000	0xe0001000
+	*/
+	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
+	                0xf4000000, PM_64K);
+	add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000),
+	                0xfd000000, PM_4K);
+
+	/* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
+	   in the CS[012] region. We can't use ioremap() yet. The NVRAM
+	   is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
+
+		Ocelot PLD (CS0)	0xfc000000	0xe0020000
+		NVRAM (CS1)		0xfc800000	0xe0030000
+	*/
+	add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000),
+	                    0xfc000000, PM_64K);
+	add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
+	                    0xfc800000, PM_64K);
+
+	marvell_base = 0xf4000000;
+}
+
+extern int rm7k_tcache_enabled;
+
+/*
+ * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
+ */
+#define Page_Invalidate_T 0x16
+static void __init setup_l3cache(unsigned long size)
+{
+	int register i;
+
+	printk("Enabling L3 cache...");
+
+	/* Enable the L3 cache in the GT64120A's CPU Configuration register */
+	MV_WRITE(0, MV_READ(0) | (1<<14));
+
+	/* Enable the L3 cache in the CPU */
+	set_c0_config(1<<12 /* CONF_TE */);
+
+	/* Clear the cache */
+	write_c0_taglo(0);
+	write_c0_taghi(0);
+
+	for (i=0; i < size; i+= 4096) {
+		__asm__ __volatile__ (
+			".set noreorder\n\t"
+			".set mips3\n\t"
+			"cache %1, (%0)\n\t"
+			".set mips0\n\t"
+			".set reorder"
+			:
+			: "r" (KSEG0ADDR(i)),
+			  "i" (Page_Invalidate_T));
+	}
+
+	/* Let the RM7000 MM code know that the tertiary cache is enabled */
+	rm7k_tcache_enabled = 1;
+
+	printk("Done\n");
+}
+
+static int  __init momenco_ocelot_g_setup(void)
+{
+	void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
+	unsigned int tmpword;
+
+	board_time_init = gt64240_time_init;
+
+	_machine_restart = momenco_ocelot_restart;
+	_machine_halt = momenco_ocelot_halt;
+	_machine_power_off = momenco_ocelot_power_off;
+
+	/*
+	 * initrd_start = (ulong)ocelot_initrd_start;
+	 * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+	 * initrd_below_start_ok = 1;
+	 */
+
+	/* do handoff reconfiguration */
+	PMON_v2_setup();
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+	/* get the mac addr */
+	memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
+#endif
+
+	/* Turn off the Bit-Error LED */
+	OCELOT_PLD_WRITE(0x80, INTCLR);
+
+	tmpword = OCELOT_PLD_READ(BOARDREV);
+	if (tmpword < 26)
+		printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword);
+	else
+		printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword);
+
+	tmpword = OCELOT_PLD_READ(PLD1_ID);
+	printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
+	tmpword = OCELOT_PLD_READ(PLD2_ID);
+	printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
+	tmpword = OCELOT_PLD_READ(RESET_STATUS);
+	printk("Reset reason: 0x%x\n", tmpword);
+	reset_reason = tmpword;
+	OCELOT_PLD_WRITE(0xff, RESET_STATUS);
+
+	tmpword = OCELOT_PLD_READ(BOARD_STATUS);
+	printk("Board Status register: 0x%02x\n", tmpword);
+	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+	printk("  - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
+	printk("  - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
+	printk("  - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
+
+	if (tmpword&12)
+		l3func((1<<(((tmpword&12) >> 2)+20)));
+
+	switch(tmpword &3) {
+	case 3:
+		/* 512MiB -- two banks of 256MiB */
+		add_memory_region(  0x0<<20, 0x100<<20, BOOT_MEM_RAM);
+/*
+		add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
+*/
+		break;
+	case 2:
+		/* 256MiB -- two banks of 128MiB */
+		add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM);
+		add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
+		break;
+	case 1:
+		/* 128MiB -- 64MiB per bank */
+		add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
+		add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
+		break;
+	case 0:
+		/* 64MiB */
+		add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
+		break;
+	}
+
+	/* FIXME: Fix up the DiskOnChip mapping */
+	MV_WRITE(0x468, 0xfef73);
+
+	return 0;
+}
+
+early_initcall(momenco_ocelot_g_setup);
+
+/* This needs to be one of the first initcalls, because no I/O port access
+   can work before this */
+
+static int io_base_ioremap(void)
+{
+	/* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
+	unsigned long io_remap_range;
+
+	io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000);
+	if (!io_remap_range)
+		panic("Could not ioremap I/O port range");
+
+	set_io_port_base(io_remap_range - 0xc0000000);
+
+	return 0;
+}
+
+module_init(io_base_ioremap);