Merge commit 'v2.6.35-rc6' into devicetree/next

Conflicts:
	arch/sparc/kernel/prom_64.c

7 files changed, 70 insertions, 3 deletions

diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 3df1967dea08..c97ca69b94e0 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -23,6 +23,7 @@ config LEMOTE_FULOONG2E
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
+	select LOONGSON_MC146818
 	help
 	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
@@ -51,6 +52,7 @@ config LEMOTE_MACH2F
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
 	help
 	  Lemote Loongson 2F family machines utilize the 2F revision of
 	  Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@ config LOONGSON_UART_BASE
 	bool
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index cdd2e812ba1a..e526488df655 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_SERIAL_8250) += serial.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
 # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index eaf8b86e3318..5b5cbba699b3 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -49,6 +49,8 @@ void pci_ehci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_EHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 9a96b5664c78..681d1291a2c7 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -51,6 +51,7 @@ void pci_ide_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_IDE_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if (value & 0x01) {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
 			lo = (value & 0xfffffff0) | 0x1;
 			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
 
@@ -65,19 +66,30 @@ void pci_ide_write_reg(int reg, u32 value)
 			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
 			lo |= 0x01;
 			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+			lo = value;
 			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		}
 		break;
 	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
 		break;
 	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
 		break;
 	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
 		break;
 	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
 		break;
 	default:
@@ -167,6 +179,7 @@ u32 pci_ide_read_reg(int reg)
 	case PCI_IDE_ETC_REG:
 		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
 		conf_data = lo;
+		break;
 	case PCI_IDE_PM_REG:
 		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
 		conf_data = lo;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index f5c0818831b2..4d9f65abeaff 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -61,7 +61,7 @@ static void divil_lbar_enable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
@@ -76,7 +76,7 @@ static void divil_lbar_disable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index db5900aadd6b..bdedf512baf7 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -49,6 +49,8 @@ void pci_ohci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_OHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
new file mode 100644
index 000000000000..a90d87c01555
--- /dev/null
+++ b/arch/mips/loongson/common/rtc.c
@@ -0,0 +1,43 @@
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);