Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/asm-x86/statfs.h

22 files changed, 982 insertions, 367 deletions

diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 706f93974797..d9da7112aaf8 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -6,10 +6,11 @@ extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o setup.o signal.o syscall.o \
-		   time.o topology.o traps.o unaligned.o
+		   time.o topology.o traps.o unaligned.o watch.o
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 24a2d907aa0d..4a4c59f2737a 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -12,6 +12,14 @@
 
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
                            struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }
 
-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
 
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
 
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
 
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@@ -107,65 +78,16 @@ out:
 	return IRQ_HANDLED;
 }
 
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
 
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }
 
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }
 
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;
 
 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;
 
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }
 
+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;
 
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
 	clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif
 
 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
new file mode 100644
index 000000000000..5162fe4b5952
--- /dev/null
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -0,0 +1,321 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register.  The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register.  Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days.  If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	unsigned long timestamp, reference, previous;
+	unsigned long nextcomp = 0L;
+	int vpe = current_cpu_data.vpe_id;
+	int cpu = smp_processor_id();
+	local_irq_save(flags);
+	mtflags = dmt();
+
+	/*
+	 * Maintain the per-TC virtual timer
+	 * and program the per-VPE shared Count register
+	 * as appropriate here...
+	 */
+	reference = (unsigned long)read_c0_count();
+	timestamp = MAKEVALID(reference + delta);
+	/*
+	 * To really model the clock, we have to catch the case
+	 * where the current next-in-VPE timestamp is the old
+	 * timestamp for the calling CPE, but the new value is
+	 * in fact later.  In that case, we have to do a full
+	 * scan and discover the new next-in-VPE CPU id and
+	 * timestamp.
+	 */
+	previous = smtc_nexttime[vpe][cpu];
+	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+	    && IS_SOONER(previous, timestamp, reference)) {
+		int i;
+		int soonest = cpu;
+
+		/*
+		 * Update timestamp array here, so that new
+		 * value gets considered along with those of
+		 * other virtual CPUs on the VPE.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+		for_each_online_cpu(i) {
+			if (ISVALID(smtc_nexttime[vpe][i])
+			    && IS_SOONER(smtc_nexttime[vpe][i],
+				smtc_nexttime[vpe][soonest], reference)) {
+				    soonest = i;
+			}
+		}
+		smtc_nextinvpe[vpe] = soonest;
+		nextcomp = smtc_nexttime[vpe][soonest];
+	/*
+	 * Otherwise, we don't have to process the whole array rank,
+	 * we just have to see if the event horizon has gotten closer.
+	 */
+	} else {
+		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+		    IS_SOONER(timestamp,
+			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+			    smtc_nextinvpe[vpe] = cpu;
+			    nextcomp = timestamp;
+		}
+		/*
+		 * Since next-in-VPE may me the same as the executing
+		 * virtual CPU, we update the array *after* checking
+		 * its value.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+	}
+
+	/*
+	 * It may be that, in fact, we don't need to update Compare,
+	 * but if we do, we want to make sure we didn't fall into
+	 * a crack just behind Count.
+	 */
+	if (ISVALID(nextcomp)) {
+		write_c0_compare(nextcomp);
+		ehb();
+		/*
+		 * We never return an error, we just make sure
+		 * that we trigger the handlers as quickly as
+		 * we can if we fell behind.
+		 */
+		while ((nextcomp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX) {
+			nextcomp += CATCHUP_INCREMENT;
+			write_c0_compare(nextcomp);
+			ehb();
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	int cpu;
+	struct clock_event_device *cd;
+	unsigned long nextstamp = 0L;
+	unsigned long reference;
+
+
+repeat:
+	for_each_online_cpu(cpu) {
+	    /*
+	     * Find virtual CPUs within the current VPE who have
+	     * unserviced timer requests whose time is now past.
+	     */
+	    local_irq_save(flags);
+	    mtflags = dmt();
+	    if (cpu_data[cpu].vpe_id == vpe &&
+		ISVALID(smtc_nexttime[vpe][cpu])) {
+		reference = (unsigned long)read_c0_count();
+		if ((smtc_nexttime[vpe][cpu] - reference)
+			 > (unsigned long)LONG_MAX) {
+			    smtc_nexttime[vpe][cpu] = 0L;
+			    emt(mtflags);
+			    local_irq_restore(flags);
+			    /*
+			     * We don't send IPIs to ourself.
+			     */
+			    if (cpu != smp_processor_id()) {
+				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+			    } else {
+				cd = &per_cpu(mips_clockevent_device, cpu);
+				cd->event_handler(cd);
+			    }
+		} else {
+			/* Local to VPE but Valid Time not yet reached. */
+			if (!ISVALID(nextstamp) ||
+			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+			    reference)) {
+				smtc_nextinvpe[vpe] = cpu;
+				nextstamp = smtc_nexttime[vpe][cpu];
+			}
+			emt(mtflags);
+			local_irq_restore(flags);
+		}
+	    } else {
+		emt(mtflags);
+		local_irq_restore(flags);
+
+	    }
+	}
+	/* Reprogram for interrupt at next soonest timestamp for VPE */
+	if (ISVALID(nextstamp)) {
+		write_c0_compare(nextstamp);
+		ehb();
+		if ((nextstamp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX)
+				goto repeat;
+	}
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+	handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		smtc_distribute_timer(cpu_data[cpu].vpe_id);
+	}
+	return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+	uint64_t mips_freq = mips_hpt_frequency;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+	int i;
+	int j;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+	if (cpu == 0) {
+		for (i = 0; i < num_possible_cpus(); i++) {
+			smtc_nextinvpe[i] = 0;
+			for (j = 0; j < num_possible_cpus(); j++)
+				smtc_nexttime[i][j] = 0L;
+		}
+		/*
+		 * SMTC also can't have the usablility test
+		 * run by secondary TCs once Compare is in use.
+		 */
+		if (!c0_compare_int_usable())
+			return -ENXIO;
+	}
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+	cd->shift		= 32;
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	/*
+	 * On SMTC we only want to do the data structure
+	 * initialization and IRQ setup once.
+	 */
+	if (cpu)
+		return 0;
+	/*
+	 * And we need the hwmask associated with the c0_compare
+	 * vector to be initialized.
+	 */
+	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 335a6ae3d594..0cf15457ecac 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -21,6 +21,7 @@
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
+#include <asm/watch.h>
 
 /*
  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
@@ -45,18 +46,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }
 
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);
 
 /*
  * This variant is preferable as it allows testing need_resched and going to
@@ -65,14 +55,18 @@ static void r4k_wait(void)
  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  * using this version a gamble.
  */
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
 {
 	local_irq_disable();
 	if (!need_resched())
-		__asm__("	.set	mips3		\n"
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
 			"	wait			\n"
-			"	.set	mips0		\n");
+			"	.set	pop		\n");
 	local_irq_enable();
+	__asm__(" 	.globl __pastwait	\n"
+		"__pastwait:			\n");
+	return;
 }
 
 /*
@@ -128,7 +122,7 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
@@ -242,7 +236,6 @@ static inline void check_errata(void)
 
 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }
 
@@ -685,6 +678,7 @@ static inline void spram_config(void) {}
 static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 {
 	decode_configs(c);
+	mips_probe_watch_registers(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index e29598ae939d..ffa331029e08 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -79,11 +79,6 @@ FEXPORT(syscall_exit)
 
 FEXPORT(restore_all)			# restore full frame
 #ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	jal	deferred_smtc_ipi
-	LONG_S	s0, TI_REGS($28)
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 /* Re-arm any temporarily masked interrupts not explicitly "acked" */
 	mfc0	v0, CP0_TCSTATUS
@@ -112,6 +107,11 @@ FEXPORT(restore_all)			# restore full frame
 	xor	t0, t0, t3
 	mtc0	t0, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	jal	deferred_smtc_ipi
+	LONG_S	s0, TI_REGS($28)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index c6ada98ee042..757d48f0d80f 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define PANIC_PIC(msg)					\
 		.set push;				\
@@ -126,7 +127,42 @@ handle_vcei:
 
 	__FINIT
 
+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT
@@ -245,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
 	and	t0, a0, t1
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 	mfc0	t2, CP0_TCCONTEXT
-	or	t0, t0, t2
-	mtc0	t0, CP0_TCCONTEXT
+	or	t2, t0, t2
+	mtc0	t2, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
 	xor	t1, t1, t0
 	mtc0	t1, CP0_STATUS
@@ -416,7 +453,11 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER tr tr sti silent			/* #13 */
 	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
+#ifdef 	CONFIG_HARDWARE_WATCHPOINTS
+	BUILD_HANDLER watch watch sti silent		/* #23 */
+#else
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
+#endif
 	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
 	BUILD_HANDLER mt mt sti silent			/* #25 */
 	BUILD_HANDLER dsp dsp sti silent		/* #26 */
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 361364501d34..492a0a8d70fb 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,6 +22,7 @@
 #include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
+#include <asm/pgtable-bits.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
 
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 8f6d58ede33c..6e152c80cd4a 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		if (remcom_in_buffer[0] == 's')
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+			atomic_set(&kgdb_cpu_doing_single_step, cpu);
 
 		return 0;
 	}
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index df4d3f2f740c..dc9eb72ed9de 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh);
 /*
  * FPU Use Factor empirically derived from experiments on 34K
  */
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000
 
 static __init int mt_fp_affinity_init(void)
 {
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 36f065398243..75bb1300dd7a 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -23,6 +23,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	unsigned int version = cpu_data[n].processor_id;
 	unsigned int fp_vers = cpu_data[n].fpu_id;
 	char fmt [64];
+	int i;
 
 #ifdef CONFIG_SMP
 	if (!cpu_isset(n, cpu_online_map))
@@ -50,8 +51,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize);
 	seq_printf(m, "extra interrupt vector\t: %s\n",
 	              cpu_has_divec ? "yes" : "no");
-	seq_printf(m, "hardware watchpoint\t: %s\n",
-	              cpu_has_watch ? "yes" : "no");
+	seq_printf(m, "hardware watchpoint\t: %s",
+		   cpu_has_watch ? "yes, " : "no\n");
+	if (cpu_has_watch) {
+		seq_printf(m, "count: %d, address/irw mask: [",
+			   cpu_data[n].watch_reg_count);
+		for (i = 0; i < cpu_data[n].watch_reg_count; i++)
+			seq_printf(m, "%s0x%04x", i ? ", " : "" ,
+				   cpu_data[n].watch_reg_masks[i]);
+		seq_printf(m, "]\n");
+	}
 	seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
 		      cpu_has_mips16 ? " mips16" : "",
 		      cpu_has_mdmx ? " mdmx" : "",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 17edc69cf5c1..ca2e4026ad20 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -54,7 +54,7 @@ void __noreturn cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
 			extern void smtc_idle_loop_hook(void);
 
 			smtc_idle_loop_hook();
@@ -144,17 +144,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	 */
 	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
-	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
-#ifdef CONFIG_MIPS_MT_FPAFF
+#ifdef CONFIG_MIPS_MT_SMTC
 	/*
-	 * FPU affinity support is cleaner if we track the
-	 * user-visible CPU affinity from the very beginning.
-	 * The generic cpus_allowed mask will already have
-	 * been copied from the parent before copy_thread
-	 * is invoked.
+	 * SMTC restores TCStatus after Status, and the CU bits
+	 * are aliased there.
 	 */
-	p->thread.user_cpus_allowed = p->cpus_allowed;
+	childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
+	clear_tsk_thread_flag(p, TIF_USEDFPU);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
 	if (clone_flags & CLONE_SETTLS)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 35234b92b9a5..054861ccb4dd 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -46,7 +46,8 @@
  */
 void ptrace_disable(struct task_struct *child)
 {
-	/* Nothing to do.. */
+	/* Don't load the watchpoint registers for the ex-child. */
+	clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
 }
 
 /*
@@ -167,6 +168,93 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
 	return 0;
 }
 
+int ptrace_get_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	enum pt_watch_style style;
+	int i;
+
+	if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+
+#ifdef CONFIG_32BIT
+	style = pt_watch_style_mips32;
+#define WATCH_STYLE mips32
+#else
+	style = pt_watch_style_mips64;
+#define WATCH_STYLE mips64
+#endif
+
+	__put_user(style, &addr->style);
+	__put_user(current_cpu_data.watch_reg_use_cnt,
+		   &addr->WATCH_STYLE.num_valid);
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		__put_user(child->thread.watch.mips3264.watchlo[i],
+			   &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff,
+			   &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(current_cpu_data.watch_reg_masks[i],
+			   &addr->WATCH_STYLE.watch_masks[i]);
+	}
+	for (; i < 8; i++) {
+		__put_user(0, &addr->WATCH_STYLE.watchlo[i]);
+		__put_user(0, &addr->WATCH_STYLE.watchhi[i]);
+		__put_user(0, &addr->WATCH_STYLE.watch_masks[i]);
+	}
+
+	return 0;
+}
+
+int ptrace_set_watch_regs(struct task_struct *child,
+			  struct pt_watch_regs __user *addr)
+{
+	int i;
+	int watch_active = 0;
+	unsigned long lt[NUM_WATCH_REGS];
+	u16 ht[NUM_WATCH_REGS];
+
+	if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+		return -EIO;
+	if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs)))
+		return -EIO;
+	/* Check the values. */
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		__get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]);
+#ifdef CONFIG_32BIT
+		if (lt[i] & __UA_LIMIT)
+			return -EINVAL;
+#else
+		if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) {
+			if (lt[i] & 0xffffffff80000000UL)
+				return -EINVAL;
+		} else {
+			if (lt[i] & __UA_LIMIT)
+				return -EINVAL;
+		}
+#endif
+		__get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]);
+		if (ht[i] & ~0xff8)
+			return -EINVAL;
+	}
+	/* Install them. */
+	for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+		if (lt[i] & 7)
+			watch_active = 1;
+		child->thread.watch.mips3264.watchlo[i] = lt[i];
+		/* Set the G bit. */
+		child->thread.watch.mips3264.watchhi[i] = ht[i];
+	}
+
+	if (watch_active)
+		set_tsk_thread_flag(child, TIF_LOAD_WATCH);
+	else
+		clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
+
+	return 0;
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
@@ -238,7 +326,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
-			unsigned int irqflags;
+			unsigned long irqflags;
 			unsigned int mtflags;
 #endif /* CONFIG_MIPS_MT_SMTC */
 
@@ -440,6 +528,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				(unsigned long __user *) data);
 		break;
 
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child,
+					(struct pt_watch_regs __user *) addr);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child,
+					(struct pt_watch_regs __user *) addr);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 76818be6ba7c..1ca34104e593 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -15,6 +15,7 @@
  * binaries.
  */
 #include <linux/compiler.h>
+#include <linux/compat.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -36,47 +37,17 @@
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
-int ptrace_getregs(struct task_struct *child, __s64 __user *data);
-int ptrace_setregs(struct task_struct *child, __s64 __user *data);
-
-int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
-int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
-
 /*
  * Tracing a 32-bit process with a 64-bit strace and vice versa will not
  * work.  I don't know how to fix this.
  */
-asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	struct task_struct *child;
+	int addr = caddr;
+	int data = cdata;
 	int ret;
 
-#if 0
-	printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
-	       (int) request, (int) pid, (unsigned long) addr,
-	       (unsigned long) data);
-#endif
-	lock_kernel();
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
-
-	child = ptrace_get_task_struct(pid);
-	if (IS_ERR(child)) {
-		ret = PTR_ERR(child);
-		goto out;
-	}
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		goto out_tsk;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
-
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -214,7 +185,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_dsp) {
 				tmp = 0;
 				ret = -EIO;
-				goto out_tsk;
+				goto out;
 			}
 			dregs = __get_dsp_regs(child);
 			tmp = (unsigned long) (dregs[addr - DSP_BASE]);
@@ -224,14 +195,14 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			if (!cpu_has_dsp) {
 				tmp = 0;
 				ret = -EIO;
-				goto out_tsk;
+				goto out;
 			}
 			tmp = child->thread.dsp.dspcontrol;
 			break;
 		default:
 			tmp = 0;
 			ret = -EIO;
-			goto out_tsk;
+			goto out;
 		}
 		ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
 		break;
@@ -410,14 +381,20 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 				(unsigned long __user *) (unsigned long) data);
 		break;
 
+	case PTRACE_GET_WATCH_REGS:
+		ret = ptrace_get_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
+	case PTRACE_SET_WATCH_REGS:
+		ret = ptrace_set_watch_regs(child,
+			(struct pt_watch_regs __user *) (unsigned long) addr);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
-
-out_tsk:
-	put_task_struct(child);
 out:
-	unlock_kernel();
 	return ret;
 }
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index da7f1b6ea0fb..324c5499dec2 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -219,7 +219,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_getrusage
 	PTR	compat_sys_sysinfo
 	PTR	compat_sys_times
-	PTR	sys32_ptrace
+	PTR	compat_sys_ptrace
 	PTR	sys_getuid			/* 6100 */
 	PTR	sys_syslog
 	PTR	sys_getgid
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d7cd1aac9ada..85fedac99a57 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -231,7 +231,7 @@ sys_call_table:
 	PTR	sys_setuid
 	PTR	sys_getuid
 	PTR	compat_sys_stime		/* 4025 */
-	PTR	sys32_ptrace
+	PTR	compat_sys_ptrace
 	PTR	sys_alarm
 	PTR	sys_ni_syscall			/* was sys_fstat */
 	PTR	sys_pause
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2aae76bce293..16f8edfe5cdc 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
 		pr_err("initrd start must be page aligned\n");
 		goto disable;
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 572c610db1b1..652709b353ad 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -482,6 +482,18 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 	return err;
 }
 
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, 3*sizeof(int)) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE32))
+		return -EFAULT;
+
+	return 0;
+}
+
 asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct sigframe32 __user *frame;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4410f172b8ab..7b59cfb7e602 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -121,6 +121,8 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
+	notify_cpu_starting(cpu);
+
 	mp_ops->smp_finish();
 	set_cpu_sibling_map(cpu);
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a516286532ab..897fb2b4751c 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1,4 +1,21 @@
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
 
 #include <linux/clockchips.h>
 #include <linux/kernel.h>
@@ -21,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
 #include <asm/smtc_proc.h>
 
 /*
@@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];
 
 asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
 
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
 
 /*
  * Number of InterProcessor Interrupt (IPI) message buffers to allocate
@@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS];
 
 #define IPIBUF_PER_CPU 4
 
-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
 static struct smtc_ipi_q freeIPIq;
 
 
@@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
  * phys_cpu_present_map and the logical/physical mappings.
  */
 
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
 {
 	int i, ntcs;
 
@@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 			| TCSTATUS_A);
-	write_tc_c0_tccontext(0);
+	/*
+	 * TCContext gets an offset from the base of the IPIQ array
+	 * to be used in low-level code to detect the presence of
+	 * an active IPI queue
+	 */
+	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
 	/* In general, all TCs should have the same cpu_data indications */
@@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;
+	/* Multi-core SMTC hasn't been tested, but be prepared */
+	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 }
 
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
 
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
 {
 	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 	unsigned long flags;
@@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
 		IPIQ[i].head = IPIQ[i].tail = NULL;
 		spin_lock_init(&IPIQ[i].lock);
 		IPIQ[i].depth = 0;
-		atomic_set(&ipi_timer_latch[i], 0);
 	}
 
 	/* cpu_data index starts at zero */
 	cpu = 0;
 	cpu_data[cpu].vpe_id = 0;
 	cpu_data[cpu].tc_id = 0;
+	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 	cpu++;
 
 	/* Report on boot-time options */
@@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
 			write_vpe_c0_compare(0);
 			/* Propagate Config7 */
 			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count());
+			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+			ehb();
 		}
 		/* enable multi-threading within VPE */
 		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void)
 void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 {
 	extern u32 kernelsp[NR_CPUS];
-	long flags;
+	unsigned long flags;
 	int mtflags;
 
 	LOCK_MT_PRA();
@@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	/*
-	 * Start timer on secondary VPEs if necessary.
-	 * plat_timer_setup has already have been invoked by init/main
-	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and in ascending order
-	 * to across available VPEs.
-	 */
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE)
-	    != cpu_data[smp_processor_id() - 1].vpe_id)){
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-	}
-
 	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
 {
+	int cpu = smp_processor_id();
+
+	/*
+	 * Lowest-numbered CPU per VPE starts a clock tick.
+	 * Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and
+	 * in ascending order across available VPEs.
+	 */
+	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }
@@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 {
 	int tcstatus;
 	struct smtc_ipi *pipi;
-	long flags;
+	unsigned long flags;
 	int mtflags;
+	unsigned long tcrestart;
+	extern void r4k_wait_irqoff(void), __pastwait(void);
 
 	if (cpu == smp_processor_id()) {
 		printk("Cannot Send IPI to self!\n");
@@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	pipi->arg = (void *)action;
 	pipi->dest = cpu;
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		if (type == SMTC_CLOCK_TICK)
-			atomic_inc(&ipi_timer_latch[cpu]);
 		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
@@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 
 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 			/*
-			 * Spin-waiting here can deadlock,
-			 * so we queue the message for the target TC.
+			 * If we're in the the irq-off version of the wait
+			 * loop, we need to force exit from the wait and
+			 * do a direct post of the IPI.
+			 */
+			if (cpu_wait == r4k_wait_irqoff) {
+				tcrestart = read_tc_c0_tcrestart();
+				if (tcrestart >= (unsigned long)r4k_wait_irqoff
+				    && tcrestart < (unsigned long)__pastwait) {
+					write_tc_c0_tcrestart(__pastwait);
+					tcstatus &= ~TCSTATUS_IXMT;
+					write_tc_c0_tcstatus(tcstatus);
+					goto postdirect;
+				}
+			}
+			/*
+			 * Otherwise we queue the message for the target TC
+			 * to pick up when he does a local_irq_restore()
 			 */
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
-			/* Try to reduce redundant timer interrupt messages */
-			if (type == SMTC_CLOCK_TICK) {
-			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
-				smtc_ipi_nq(&freeIPIq, pipi);
-				return;
-			    }
-			}
 			smtc_ipi_nq(&IPIQ[cpu], pipi);
 		} else {
-			if (type == SMTC_CLOCK_TICK)
-				atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
 			post_direct_ipi(cpu, pipi);
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
@@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
 	smp_call_function_interrupt();
 }
 
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void ipi_decode(struct smtc_ipi *pipi)
 {
@@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int ticks;
-
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
 		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
-		cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-		ticks = atomic_read(&ipi_timer_latch[cpu]);
-		atomic_sub(ticks, &ipi_timer_latch[cpu]);
-		while (ticks) {
-			cd->event_handler(cd);
-			ticks--;
-		}
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
 		irq_exit();
 		break;
 
@@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
 	}
 }
 
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
 void deferred_smtc_ipi(void)
 {
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-/* DEBUG */
-	int q = smp_processor_id();
+	int cpu = smp_processor_id();
 
 	/*
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
+	 * If irq_disabled when this was called, then any IPIs queued
+	 * after we test last will be taken on the next irq_enable/restore.
+	 * If interrupts were enabled, then any IPIs added after the
+	 * last test will be taken directly.
 	 */
-	if (IPIQ[q].head != NULL) {
-		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
-			/* ipi_decode() should be called with interrupts off */
-			local_irq_save(flags);
+
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It may be possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		if (pipi != NULL)
 			ipi_decode(pipi);
-			local_irq_restore(flags);
-		}
+		/*
+		 * The use of the __raw_local restore isn't
+		 * as obviously necessary here as in smtc_ipi_replay(),
+		 * but it's more efficient, given that we're already
+		 * running down the IPI queue.
+		 */
+		__raw_local_irq_restore(flags);
 	}
 }
 
@@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
 	struct smtc_ipi *pipi;
 	unsigned long tcstatus;
 	int sent;
-	long flags;
+	unsigned long flags;
 	unsigned int mtflags;
 	unsigned int vpflags;
 
@@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
 
 /*
  * SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled.  We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
  */
 
-static void __smtc_ipi_replay(void)
+ /*
+  * smtc_ipi_replay is called from raw_local_irq_restore
+  */
+
+void smtc_ipi_replay(void)
 {
 	unsigned int cpu = smp_processor_id();
 
 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * If we use the smtc_ipi_qdepth() macro, we'll get an
-	 * exact number - but we'll also disable interrupts
-	 * and create a window of failure where a new IPI gets
-	 * queued after we test the depth but before we re-enable
-	 * interrupts. So long as IXMT never gets set, however,
 	 * we should be OK:  If we pick up something and dispatch
 	 * it here, that's great. If we see nothing, but concurrent
 	 * with this operation, another TC sends us an IPI, IXMT
 	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.
+	 * and not a pseudo-pseudo interrupt.  The important thing
+	 * is to do the last check for queued message *after* the
+	 * re-enabling of interrupts.
 	 */
-	if (IPIQ[cpu].depth > 0) {
-		while (1) {
-			struct smtc_ipi_q *q = &IPIQ[cpu];
-			struct smtc_ipi *pipi;
-			extern void self_ipi(struct smtc_ipi *);
-
-			spin_lock(&q->lock);
-			pipi = __smtc_ipi_dq(q);
-			spin_unlock(&q->lock);
-			if (!pipi)
-				break;
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It's just possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		/*
+		 ** But use a raw restore here to avoid recursion.
+		 */
+		__raw_local_irq_restore(flags);
 
+		if (pipi) {
 			self_ipi(pipi);
 			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }
 
-void smtc_ipi_replay(void)
-{
-	raw_local_irq_disable();
-	__smtc_ipi_replay();
-}
-
 EXPORT_SYMBOL(smtc_ipi_replay);
 
 void smtc_idle_loop_hook(void)
@@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
 		}
 	}
 
-	/*
-	 * Now that we limit outstanding timer IPIs, check for hung TC
-	 */
-	for (tc = 0; tc < NR_CPUS; tc++) {
-		/* Don't check ourself - we'll dequeue IPIs just below */
-		if ((tc != smp_processor_id()) &&
-		    atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
-		    if (clock_hang_reported[tc] == 0) {
-			pdb_msg += sprintf(pdb_msg,
-				"TC %d looks hung with timer latch at %d\n",
-				tc, atomic_read(&ipi_timer_latch[tc]));
-			clock_hang_reported[tc]++;
-			}
-		}
-	}
 	emt(mtflags);
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
-	/*
-	 * Replay any accumulated deferred IPIs. If "Instant Replay"
-	 * is in use, there should never be any.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	{
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__smtc_ipi_replay();
-		local_irq_restore(flags);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+	smtc_ipi_replay();
 }
 
 void smtc_soft_dump(void)
@@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
 		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
 	}
 	smtc_ipi_qdump();
-	printk("Timer IPI Backlogs:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
-	}
 	printk("%d Recoveries of \"stolen\" FPU\n",
 	       atomic_read(&smtc_fpu_recoveries));
 }
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 426cced1e9dc..80b9e070c207 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -42,10 +42,14 @@
 #include <asm/tlbdebug.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
+#include <asm/watch.h>
 #include <asm/mmu_context.h>
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@@ -373,8 +377,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -822,8 +826,10 @@ static void mt_ase_fp_affinity(void)
 		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
 			cpumask_t tmask;
 
-			cpus_and(tmask, current->thread.user_cpus_allowed,
-			         mt_fpu_cpumask);
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpus_and(tmask, current->cpus_allowed,
+				mt_fpu_cpumask);
 			set_cpus_allowed(current, tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
@@ -907,13 +913,26 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
+	u32 cause;
+
 	/*
-	 * We use the watch exception where available to detect stack
-	 * overflows.
+	 * Clear WP (bit 22) bit of cause register so we don't loop
+	 * forever.
 	 */
-	dump_tlb_all();
-	show_regs(regs);
-	panic("Caught WATCH exception - probably caused by stack overflow.");
+	cause = read_c0_cause();
+	cause &= ~(1 << 22);
+	write_c0_cause(cause);
+
+	/*
+	 * If the current thread has the watch registers loaded, save
+	 * their values and send SIGTRAP.  Otherwise another thread
+	 * left the registers set, clear them and continue.
+	 */
+	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+		mips_read_watch_registers();
+		force_sig(SIGTRAP, current);
+	} else
+		mips_clear_watch_registers();
 }
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
@@ -1200,7 +1219,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1251,6 +1270,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@@ -1258,11 +1280,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -1272,7 +1294,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}
 
-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
 
@@ -1283,7 +1305,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1295,7 +1318,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1515,7 +1539,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1552,6 +1576,10 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@@ -1616,7 +1644,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
@@ -1680,6 +1708,8 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index b5470ceb418b..afb119f35682 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
new file mode 100644
index 000000000000..c15406968030
--- /dev/null
+++ b/arch/mips/kernel/watch.c
@@ -0,0 +1,188 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/watch.h>
+
+/*
+ * Install the watch registers for the current thread.  A maximum of
+ * four registers are installed although the machine may have more.
+ */
+void mips_install_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		write_c0_watchlo3(watches->watchlo[3]);
+		/* Write 1 to the I, R, and W bits to clear them, and
+		   1 to G so all ASIDs are trapped. */
+		write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
+	case 3:
+		write_c0_watchlo2(watches->watchlo[2]);
+		write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
+	case 2:
+		write_c0_watchlo1(watches->watchlo[1]);
+		write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
+	case 1:
+		write_c0_watchlo0(watches->watchlo[0]);
+		write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
+	}
+}
+
+/*
+ * Read back the watchhi registers so the user space debugger has
+ * access to the I, R, and W bits.  A maximum of four registers are
+ * read although the machine may have more.
+ */
+void mips_read_watch_registers(void)
+{
+	struct mips3264_watch_reg_state *watches =
+		&current->thread.watch.mips3264;
+	switch (current_cpu_data.watch_reg_use_cnt) {
+	default:
+		BUG();
+	case 4:
+		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
+	case 3:
+		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
+	case 2:
+		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
+	case 1:
+		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
+	}
+	if (current_cpu_data.watch_reg_use_cnt == 1 &&
+	    (watches->watchhi[0] & 7) == 0) {
+		/* Pathological case of release 1 architecture that
+		 * doesn't set the condition bits.  We assume that
+		 * since we got here, the watch condition was met and
+		 * signal that the conditions requested in watchlo
+		 * were met.  */
+		watches->watchhi[0] |= (watches->watchlo[0] & 7);
+	}
+ }
+
+/*
+ * Disable all watch registers.  Although only four registers are
+ * installed, all are cleared to eliminate the possibility of endless
+ * looping in the watch handler.
+ */
+void mips_clear_watch_registers(void)
+{
+	switch (current_cpu_data.watch_reg_count) {
+	default:
+		BUG();
+	case 8:
+		write_c0_watchlo7(0);
+	case 7:
+		write_c0_watchlo6(0);
+	case 6:
+		write_c0_watchlo5(0);
+	case 5:
+		write_c0_watchlo4(0);
+	case 4:
+		write_c0_watchlo3(0);
+	case 3:
+		write_c0_watchlo2(0);
+	case 2:
+		write_c0_watchlo1(0);
+	case 1:
+		write_c0_watchlo0(0);
+	}
+}
+
+__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
+{
+	unsigned int t;
+
+	if ((c->options & MIPS_CPU_WATCH) == 0)
+		return;
+	/*
+	 * Check which of the I,R and W bits are supported, then
+	 * disable the register.
+	 */
+	write_c0_watchlo0(7);
+	t = read_c0_watchlo0();
+	write_c0_watchlo0(0);
+	c->watch_reg_masks[0] = t & 7;
+
+	/* Write the mask bits and read them back to determine which
+	 * can be used. */
+	c->watch_reg_count = 1;
+	c->watch_reg_use_cnt = 1;
+	t = read_c0_watchhi0();
+	write_c0_watchhi0(t | 0xff8);
+	t = read_c0_watchhi0();
+	c->watch_reg_masks[0] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo1(7);
+	t = read_c0_watchlo1();
+	write_c0_watchlo1(0);
+	c->watch_reg_masks[1] = t & 7;
+
+	c->watch_reg_count = 2;
+	c->watch_reg_use_cnt = 2;
+	t = read_c0_watchhi1();
+	write_c0_watchhi1(t | 0xff8);
+	t = read_c0_watchhi1();
+	c->watch_reg_masks[1] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo2(7);
+	t = read_c0_watchlo2();
+	write_c0_watchlo2(0);
+	c->watch_reg_masks[2] = t & 7;
+
+	c->watch_reg_count = 3;
+	c->watch_reg_use_cnt = 3;
+	t = read_c0_watchhi2();
+	write_c0_watchhi2(t | 0xff8);
+	t = read_c0_watchhi2();
+	c->watch_reg_masks[2] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	write_c0_watchlo3(7);
+	t = read_c0_watchlo3();
+	write_c0_watchlo3(0);
+	c->watch_reg_masks[3] = t & 7;
+
+	c->watch_reg_count = 4;
+	c->watch_reg_use_cnt = 4;
+	t = read_c0_watchhi3();
+	write_c0_watchhi3(t | 0xff8);
+	t = read_c0_watchhi3();
+	c->watch_reg_masks[3] |= (t & 0xff8);
+	if ((t & 0x80000000) == 0)
+		return;
+
+	/* We use at most 4, but probe and report up to 8. */
+	c->watch_reg_count = 5;
+	t = read_c0_watchhi4();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 6;
+	t = read_c0_watchhi5();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 7;
+	t = read_c0_watchhi6();
+	if ((t & 0x80000000) == 0)
+		return;
+
+	c->watch_reg_count = 8;
+}