bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switch

Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch
which needs to be driven slightly differently from the traditional
external switches. This patch introduces changes in arch/mips/bcm63xx in order
to:

- register a bcm63xx_enetsw driver instead of bcm63xx_enet driver
- update DMA channels configuration & state RAM base addresses
- add a new platform data configuration knob to define the number of
  ports per switch/device and force link on some ports
- define the required switch registers

On the driver side, the following changes are required:

- the switch ports need to be polled to ensure the link is up and
  running and RX/TX can properly work
- basic switch configuration needs to be performed for the switch to
  forward packets to the CPU
- update the MIB counters since the integrated

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 80 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
index d53f611184b9..118e3c938841 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@@ -39,7 +39,35 @@ struct bcm63xx_enet_platform_data {
 					    int phy_id, int reg, int val));
 };
 
+/*
+ * on board ethernet switch platform data
+ */
+#define ENETSW_MAX_PORT	8
+#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
+#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
+
+#define ENETSW_RGMII_PORT0	4
+
+struct bcm63xx_enetsw_port {
+	int		used;
+	int		phy_id;
+
+	int		bypass_link;
+	int		force_speed;
+	int		force_duplex_full;
+
+	const char	*name;
+};
+
+struct bcm63xx_enetsw_platform_data {
+	char mac_addr[ETH_ALEN];
+	int num_ports;
+	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+};
+
 int __init bcm63xx_enet_register(int unit,
 				 const struct bcm63xx_enet_platform_data *pd);
 
+int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
+
 #endif /* ! BCM63XX_DEV_ENET_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 3203fe49b34d..0a2121abb1a6 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -830,10 +830,60 @@
  * _REG relative to RSET_ENETSW
  *************************************************************************/
 
+/* Port traffic control */
+#define ENETSW_PTCTRL_REG(x)		(0x0 + (x))
+#define ENETSW_PTCTRL_RXDIS_MASK	(1 << 0)
+#define ENETSW_PTCTRL_TXDIS_MASK	(1 << 1)
+
+/* Switch mode register */
+#define ENETSW_SWMODE_REG		(0xb)
+#define ENETSW_SWMODE_FWD_EN_MASK	(1 << 1)
+
+/* IMP override Register */
+#define ENETSW_IMPOV_REG		(0xe)
+#define ENETSW_IMPOV_FORCE_MASK		(1 << 7)
+#define ENETSW_IMPOV_TXFLOW_MASK	(1 << 5)
+#define ENETSW_IMPOV_RXFLOW_MASK	(1 << 4)
+#define ENETSW_IMPOV_1000_MASK		(1 << 3)
+#define ENETSW_IMPOV_100_MASK		(1 << 2)
+#define ENETSW_IMPOV_FDX_MASK		(1 << 1)
+#define ENETSW_IMPOV_LINKUP_MASK	(1 << 0)
+
+/* Port override Register */
+#define ENETSW_PORTOV_REG(x)		(0x58 + (x))
+#define ENETSW_PORTOV_ENABLE_MASK	(1 << 6)
+#define ENETSW_PORTOV_TXFLOW_MASK	(1 << 5)
+#define ENETSW_PORTOV_RXFLOW_MASK	(1 << 4)
+#define ENETSW_PORTOV_1000_MASK		(1 << 3)
+#define ENETSW_PORTOV_100_MASK		(1 << 2)
+#define ENETSW_PORTOV_FDX_MASK		(1 << 1)
+#define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)
+
+/* MDIO control register */
+#define ENETSW_MDIOC_REG		(0xb0)
+#define ENETSW_MDIOC_EXT_MASK		(1 << 16)
+#define ENETSW_MDIOC_REG_SHIFT		20
+#define ENETSW_MDIOC_PHYID_SHIFT	25
+#define ENETSW_MDIOC_RD_MASK		(1 << 30)
+#define ENETSW_MDIOC_WR_MASK		(1 << 31)
+
+/* MDIO data register */
+#define ENETSW_MDIOD_REG		(0xb4)
+
+/* Global Management Configuration Register */
+#define ENETSW_GMCR_REG			(0x200)
+#define ENETSW_GMCR_RST_MIB_MASK	(1 << 0)
+
 /* MIB register */
 #define ENETSW_MIB_REG(x)		(0x2800 + (x) * 4)
 #define ENETSW_MIB_REG_COUNT		47
 
+/* Jumbo control register port mask register */
+#define ENETSW_JMBCTL_PORT_REG		(0x4004)
+
+/* Jumbo control mib good frame register */
+#define ENETSW_JMBCTL_MAXSIZE_REG	(0x4008)
+
 
 /*************************************************************************
  * _REG relative to RSET_OHCI_PRIV
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 682bcf3b492a..d9aee1a833f3 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -24,6 +24,7 @@ struct board_info {
 	/* enabled feature/device */
 	unsigned int	has_enet0:1;
 	unsigned int	has_enet1:1;
+	unsigned int	has_enetsw:1;
 	unsigned int	has_pci:1;
 	unsigned int	has_pccard:1;
 	unsigned int	has_ohci0:1;
@@ -36,6 +37,7 @@ struct board_info {
 	/* ethernet config */
 	struct bcm63xx_enet_platform_data enet0;
 	struct bcm63xx_enet_platform_data enet1;
+	struct bcm63xx_enetsw_platform_data enetsw;
 
 	/* USB config */
 	struct bcm63xx_usbd_platform_data usbd;