bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switch

Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch
which needs to be driven slightly differently from the traditional
external switches. This patch introduces changes in arch/mips/bcm63xx in order
to:

- register a bcm63xx_enetsw driver instead of bcm63xx_enet driver
- update DMA channels configuration & state RAM base addresses
- add a new platform data configuration knob to define the number of
  ports per switch/device and force link on some ports
- define the required switch registers

On the driver side, the following changes are required:

- the switch ports need to be polled to ensure the link is up and
  running and RX/TX can properly work
- basic switch configuration needs to be performed for the switch to
  forward packets to the CPU
- update the MIB counters since the integrated

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 4 insertions, 0 deletions

diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index a9505c4867e8..9c0ddafafb6c 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -845,6 +845,10 @@ int __init board_register_devices(void)
 	    !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
 		bcm63xx_enet_register(1, &board.enet1);
 
+	if (board.has_enetsw &&
+	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+		bcm63xx_enetsw_register(&board.enetsw);
+
 	if (board.has_usbd)
 		bcm63xx_usbd_register(&board.usbd);