Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

5 files changed, 543 insertions, 0 deletions

diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
new file mode 100644
index 000000000000..4c7d763f2113
--- /dev/null
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -0,0 +1,9 @@
+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor Db1x00 board.
+
+lib-y := init.o board_setup.o irqmap.o
+obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
new file mode 100644
index 000000000000..ac05ba0ff63f
--- /dev/null
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -0,0 +1,127 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Alchemy Db1x00 board setup.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/db1x00.h>
+
+/* not correct for db1550 */
+static BCSR * const bcsr = (BCSR *)0xAE000000;
+
+void board_reset (void)
+{
+	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+	au_writel(0x00000000, 0xAE00001C);
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	pin_func = 0;
+	/* not valid for 1550 */
+#ifdef CONFIG_AU1X00_USB_DEVICE
+	// 2nd USB port is USB device
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
+	au_writel(pin_func, SYS_PINFUNC);
+#endif
+
+#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+	/* set IRFIRSEL instead of GPIO15 */
+	pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+	au_writel(pin_func, SYS_PINFUNC);
+	/* power off until the driver is in use */
+	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
+	bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+	au_sync();
+#endif
+	au_writel(0, 0xAE000010); /* turn off pcmcia power */
+
+#ifdef CONFIG_MIPS_MIRAGE
+	/* enable GPIO[31:0] inputs */
+	au_writel(0, SYS_PININPUTEN);
+
+	/* GPIO[20] is output, tristate the other input primary GPIO's */
+	au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+
+	/* set GPIO[210:208] instead of SSI_0 */
+	pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+
+	/* set GPIO[215:211] for LED's */
+	pin_func |= (u32)((5<<2));
+
+	/* set GPIO[214:213] for more LED's */
+	pin_func |= (u32)((5<<12));
+
+	/* set GPIO[207:200] instead of PCMCIA/LCD */
+	pin_func |= (u32)((3<<17));
+	au_writel(pin_func, SYS_PINFUNC);
+
+	/* Enable speaker amplifier.  This should
+	 * be part of the audio driver.
+	 */
+	au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
+	au_writel(0x02000200, GPIO2_OUTPUT);
+#endif
+
+	au_sync();
+
+#ifdef CONFIG_MIPS_DB1000
+    printk("AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+    printk("AMD Alchemy Au1500/Db1500 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1100
+    printk("AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+    printk("AMD Alchemy Bosporus Board\n");
+#endif
+#ifdef CONFIG_MIPS_MIRAGE
+    printk("AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+    printk("AMD Alchemy Au1550/Db1550 Board\n");
+#endif
+}
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
new file mode 100644
index 000000000000..51eee94a5e82
--- /dev/null
+++ b/arch/mips/au1000/db1x00/init.c
@@ -0,0 +1,74 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	PB1000 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+#ifdef CONFIG_MIPS_BOSPORUS
+	return "Alchemy Bosporus Gateway Reference";
+#else
+	return "Alchemy Db1x00";
+#endif
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_DB1000;	/* set the platform # */   
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
new file mode 100644
index 000000000000..8f6ef0dbe1f8
--- /dev/null
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -0,0 +1,72 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ * Copyright 2003 Embedded Edge, LLC
+ *		dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+
+#ifndef CONFIG_MIPS_MIRAGE
+#ifdef CONFIG_MIPS_DB1550
+	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+#else
+	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
+	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
+	{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
+
+	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
+	{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
+	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+#endif
+#else
+	{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
+#endif
+
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
new file mode 100644
index 000000000000..ade35e432004
--- /dev/null
+++ b/arch/mips/au1000/db1x00/mirage_ts.c
@@ -0,0 +1,261 @@
+/*
+ * linux/arch/mips/au1000/db1x00/mirage_ts.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Glue between Mirage board-specific touchscreen pieces
+ *	and generic Wolfson Codec touchscreen support.
+ *
+ *	Based on pb1100_ts.c used in Hydrogen II.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC
+ *		dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
+
+#include <asm/segment.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+#include <asm/au1000.h>
+
+/*
+ *  Imported interface to Wolfson Codec driver.
+ */
+extern void *wm97xx_ts_get_handle(int which);
+extern int wm97xx_ts_ready(void* ts_handle);
+extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
+extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
+extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
+extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
+extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
+
+int wm97xx_comodule_present = 1;
+
+
+#define TS_NAME "mirage_ts"
+
+#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
+#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
+#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg)
+
+
+#define PEN_DOWN_IRQ	AU1000_GPIO_7
+
+static struct task_struct *ts_task = 0;
+static DECLARE_COMPLETION(ts_complete);
+static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
+
+#ifdef CONFIG_WM97XX_FIVEWIRETS
+static int release_pressure = 1;
+#else
+static int release_pressure = 50;
+#endif
+
+typedef struct {
+   long x;
+   long y;
+} DOWN_EVENT;
+
+#define SAMPLE_RATE	50	/* samples per second */
+#define PEN_DEBOUNCE	5	/* samples for settling - fn of SAMPLE_RATE */
+#define PEN_UP_TIMEOUT	10	/* in seconds */
+#define PEN_UP_SETTLE	5	/* samples per second */
+
+static struct {
+	int xscale;
+	int xtrans;
+	int yscale;
+	int ytrans;
+} mirage_ts_cal =
+{
+#if 0
+	xscale:   84,
+	xtrans: -157,
+	yscale:   66,
+	ytrans: -150,
+#else
+	xscale:   84,
+	xtrans: -150,
+	yscale:   66,
+	ytrans: -146,
+#endif
+};
+
+
+static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
+{
+//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
+	wake_up(&pendown_wait);
+}
+
+static int ts_thread(void *id)
+{
+	static int pen_was_down = 0;
+	static DOWN_EVENT pen_xy;
+	long x, y, z;
+	void *ts;	/* handle */
+	struct task_struct *tsk = current;
+	int timeout = HZ / SAMPLE_RATE;
+
+	ts_task = tsk;
+
+	daemonize();
+	tsk->tty = NULL;
+	tsk->policy = SCHED_FIFO;
+	tsk->rt_priority = 1;
+	strcpy(tsk->comm, "touchscreen");
+
+	/* only want to receive SIGKILL */
+	spin_lock_irq(&tsk->sigmask_lock);
+	siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
+	recalc_sigpending(tsk);
+	spin_unlock_irq(&tsk->sigmask_lock);
+
+	/* get handle for codec */
+	ts = wm97xx_ts_get_handle(0);
+
+	/* proceed only after everybody is ready */
+	wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4);
+
+	/* board-specific calibration */
+	wm97xx_ts_set_cal(ts,
+			mirage_ts_cal.xscale,
+			mirage_ts_cal.xtrans,
+			mirage_ts_cal.yscale,
+			mirage_ts_cal.ytrans);
+
+	/* route Wolfson pendown interrupts to our GPIO */
+	au_sync();
+	wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
+	au_sync();
+	wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
+	au_sync();
+	wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
+	au_sync();
+
+	for (;;) {
+		interruptible_sleep_on_timeout(&pendown_wait, timeout);
+		disable_irq(PEN_DOWN_IRQ);
+		if (signal_pending(tsk)) {
+			break;
+		}
+
+		/* read codec */
+		if (!wm97xx_ts_read_data(ts, &x, &y, &z))
+			z = 0;	/* treat no-data and pen-up the same */
+
+		if (signal_pending(tsk)) {
+			break;
+		}
+
+		if (z >= release_pressure) {
+			y = ~y;	/* top to bottom */
+			if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
+				/* bounce ? */
+				x = pen_xy.x;
+				y = pen_xy.y;
+				--pen_was_down;
+			} else if (pen_was_down <= 1) {
+				pen_xy.x = x;
+				pen_xy.y = y;
+				if (pen_was_down)
+					wm97xx_ts_send_data(ts, x, y, z);
+				pen_was_down = PEN_DEBOUNCE;
+			}
+			//wm97xx_ts_send_data(ts, x, y, z);
+			timeout = HZ / SAMPLE_RATE;
+		} else {
+			if (pen_was_down) {
+				if (--pen_was_down)
+					z = release_pressure;
+				else //THXXX
+				wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
+			}
+			/* The pendown signal takes some time to settle after
+			 * reading the pen pressure so wait a little
+			 * before enabling the pen.
+			 */
+			if (! pen_was_down) {
+//				interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
+				timeout = HZ * PEN_UP_TIMEOUT;
+			}
+		}
+		enable_irq(PEN_DOWN_IRQ);
+	}
+	enable_irq(PEN_DOWN_IRQ);
+	ts_task = NULL;
+	complete(&ts_complete);
+	return 0;
+}
+
+static int __init ts_mirage_init(void)
+{
+	int ret;
+
+	/* pen down signal is connected to GPIO 7 */
+
+	ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
+	if (ret) {
+		err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
+		return ret;
+	}
+
+	lock_kernel();
+	ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
+	if (ret < 0) {
+		unlock_kernel();
+		return ret;
+	}
+	unlock_kernel();
+
+	info("Mirage touchscreen IRQ initialized.");
+
+	return 0;
+}
+
+static void __exit ts_mirage_exit(void)
+{
+	if (ts_task) {
+		send_sig(SIGKILL, ts_task, 1);
+		wait_for_completion(&ts_complete);
+	}
+
+	free_irq(PEN_DOWN_IRQ, NULL);
+}
+
+module_init(ts_mirage_init);
+module_exit(ts_mirage_exit);
+