m68knommu: move the 520x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 103 deletions

diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c
deleted file mode 100644
index 3264b8883d5f..000000000000
--- a/arch/m68k/platform/520x/config.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/***************************************************************************/
-
-/*
- *  linux/arch/m68knommu/platform/520x/config.c
- *
- *  Copyright (C) 2005,      Freescale (www.freescale.com)
- *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
- *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-	MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
-	MCFGPF(CS, 9, 3),
-	MCFGPF(FECI2C, 16, 4),
-	MCFGPF(QSPI, 24, 4),
-	MCFGPF(TIMER, 32, 4),
-	MCFGPF(UART, 40, 8),
-	MCFGPF(FECH, 48, 8),
-	MCFGPF(FECL, 56, 8),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m520x_qspi_init(void)
-{
-	u16 par;
-	/* setup Port QS for QSPI with gpio CS control */
-	writeb(0x3f, MCF_GPIO_PAR_QSPI);
-	/* make U1CTS and U2RTS gpio for cs_control */
-	par = readw(MCF_GPIO_PAR_UART);
-	par &= 0x00ff;
-	writew(par, MCF_GPIO_PAR_UART);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-static void __init m520x_uarts_init(void)
-{
-	u16 par;
-	u8 par2;
-
-	/* UART0 and UART1 GPIO pin setup */
-	par = readw(MCF_GPIO_PAR_UART);
-	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
-	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
-	writew(par, MCF_GPIO_PAR_UART);
-
-	/* UART1 GPIO pin setup */
-	par2 = readb(MCF_GPIO_PAR_FECI2C);
-	par2 &= ~0x0F;
-	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
-		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
-	writeb(par2, MCF_GPIO_PAR_FECI2C);
-}
-
-/***************************************************************************/
-
-static void __init m520x_fec_init(void)
-{
-	u8 v;
-
-	/* Set multi-function pins to ethernet mode */
-	v = readb(MCF_GPIO_PAR_FEC);
-	writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
-
-	v = readb(MCF_GPIO_PAR_FECI2C);
-	writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-	mach_sched_init = hw_timer_init;
-	m520x_uarts_init();
-	m520x_fec_init();
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-	m520x_qspi_init();
-#endif
-}
-
-/***************************************************************************/