Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 374 insertions, 0 deletions

diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
new file mode 100644
index 000000000000..e6079b8cac60
--- /dev/null
+++ b/arch/frv/kernel/sleep.S
@@ -0,0 +1,374 @@
+/* sleep.S: power saving mode entry
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Woodhouse (dwmw2@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sys.h>
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <asm/spr-regs.h>
+
+#define __addr_MASK	0xfeff9820	/* interrupt controller mask */
+
+#define __addr_FR55X_DRCN	0xfeff0218      /* Address of DRCN register */
+#define FR55X_DSTS_OFFSET	-4		/* Offset from DRCN to DSTS */
+#define FR55X_SDRAMC_DSTS_SSI	0x00000002	/* indicates that the SDRAM is in self-refresh mode */
+
+#define __addr_FR4XX_DRCN	0xfe000430      /* Address of DRCN register */
+#define FR4XX_DSTS_OFFSET	-8		/* Offset from DRCN to DSTS */
+#define FR4XX_SDRAMC_DSTS_SSI	0x00000001	/* indicates that the SDRAM is in self-refresh mode */
+
+#define SDRAMC_DRCN_SR	0x00000001	/* transition SDRAM into self-refresh mode */
+
+	.section	.bss
+	.balign		8
+	.globl		__sleep_save_area
+__sleep_save_area:
+	.space		16
+
+
+	.text
+	.balign		4
+
+.macro li v r
+	sethi.p		%hi(\v),\r
+	setlo		%lo(\v),\r
+.endm
+
+#ifdef CONFIG_PM
+###############################################################################
+#
+# CPU suspension routine
+# - void frv_cpu_suspend(unsigned long pdm_mode)
+#
+###############################################################################
+	.globl		frv_cpu_suspend
+        .type		frv_cpu_suspend,@function
+frv_cpu_suspend:
+
+	#----------------------------------------------------
+	# save hsr0, psr, isr, and lr for resume code
+	#----------------------------------------------------
+	li		__sleep_save_area,gr11
+
+	movsg		hsr0,gr4
+	movsg		psr,gr5
+	movsg		isr,gr6
+	movsg		lr,gr7
+	stdi		gr4,@(gr11,#0)
+	stdi		gr6,@(gr11,#8)
+
+	# store the return address from sleep in GR14, and its complement in GR13 as a check
+	li		__ramboot_resume,gr14
+#ifdef CONFIG_MMU
+	# Resume via RAMBOOT# will turn MMU off, so bootloader needs a physical address.
+	sethi.p		%hi(__page_offset),gr13
+	setlo		%lo(__page_offset),gr13
+	sub		gr14,gr13,gr14
+#endif
+	not		gr14,gr13
+
+	#----------------------------------------------------
+	# preload and lock into icache that code which may have to run
+	# when dram is in self-refresh state.
+	#----------------------------------------------------
+	movsg		hsr0, gr3
+	li		HSR0_ICE,gr4
+	or		gr3,gr4,gr3
+	movgs		gr3,hsr0
+	or		gr3,gr8,gr7	// add the sleep bits for later
+
+	li		#__icache_lock_start,gr3
+	li		#__icache_lock_end,gr4
+1:	icpl		gr3,gr0,#1
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	# disable exceptions
+	movsg		psr,gr8
+	andi.p		gr8,#~PSR_PIL,gr8
+	andi		gr8,~PSR_ET,gr8
+	movgs		gr8,psr
+	ori		gr8,#PSR_ET,gr8
+
+	srli		gr8,#28,gr4
+	subicc		gr4,#3,gr0,icc0
+	beq		icc0,#0,1f
+	# FR4xx
+	li		__addr_FR4XX_DRCN,gr4
+	li		FR4XX_SDRAMC_DSTS_SSI,gr5
+	li		FR4XX_DSTS_OFFSET,gr6
+	bra		__icache_lock_start
+1:
+	# FR5xx
+	li		__addr_FR55X_DRCN,gr4
+	li		FR55X_SDRAMC_DSTS_SSI,gr5
+	li		FR55X_DSTS_OFFSET,gr6
+	bra		__icache_lock_start
+
+	.size		frv_cpu_suspend, .-frv_cpu_suspend
+
+#
+# the final part of the sleep sequence...
+# - we want it to be be cacheline aligned so we can lock it into the icache easily
+#  On entry:	gr7 holds desired hsr0 sleep value
+#               gr8 holds desired psr sleep value
+#
+	.balign		L1_CACHE_BYTES
+        .type		__icache_lock_start,@function
+__icache_lock_start:
+
+	#----------------------------------------------------
+	# put SDRAM in self-refresh mode
+	#----------------------------------------------------
+
+	# Flush all data in the cache using the DCEF instruction.
+	dcef		@(gr0,gr0),#1
+
+	# Stop DMAC transfer
+
+	# Execute dummy load from SDRAM
+	ldi		@(gr11,#0),gr11
+
+	# put the SDRAM into self-refresh mode
+	ld              @(gr4,gr0),gr11
+	ori		gr11,#SDRAMC_DRCN_SR,gr11
+	st		gr11,@(gr4,gr0)
+	membar
+
+	# wait for SDRAM to reach self-refresh mode
+1:	ld		@(gr4,gr6),gr11
+	andcc		gr11,gr5,gr11,icc0
+	beq		icc0,#0,1b
+
+	#  Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
+	#  Set the clock mode (CLKC register) as required.
+	#     - At this time, also set the CLKC register P0 bit.
+
+	# Set the HSR0 register PDM field.
+	movgs		gr7,hsr0
+
+	# Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	#      Release the interrupt mask setting of the MASK register of the
+	#      interrupt controller if necessary.
+	sti		gr10,@(gr9,#0)
+	membar
+#endif
+
+	# Set the PSR register ET bit to 1 to enable interrupts.
+	movgs		gr8,psr
+
+	###################################################
+	# this is only reached if waking up via interrupt
+	###################################################
+
+	# Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+	#----------------------------------------------------
+	# wake SDRAM from self-refresh mode
+	#----------------------------------------------------
+	ld              @(gr4,gr0),gr11
+	andi		gr11,#~SDRAMC_DRCN_SR,gr11
+	st		gr11,@(gr4,gr0)
+	membar
+2:
+	ld		@(gr4,gr6),gr11	// Wait for it to come back...
+	andcc		gr11,gr5,gr0,icc0
+	bne		icc0,0,2b
+
+	# wait for the SDRAM to stabilise
+	li		0x0100000,gr3
+3:	subicc		gr3,#1,gr3,icc0
+	bne		icc0,#0,3b
+
+	# now that DRAM is back, this is the end of the code which gets
+	# locked in icache.
+__icache_lock_end:
+	.size		__icache_lock_start, .-__icache_lock_start
+
+	# Fall-through to the RAMBOOT# wakeup path
+
+###############################################################################
+#
+#  resume from suspend re-entry point reached via RAMBOOT# and bootloader
+#
+###############################################################################
+__ramboot_resume:
+
+	#----------------------------------------------------
+	# restore hsr0, psr, isr, and leave saved lr in gr7
+	#----------------------------------------------------
+	li		__sleep_save_area,gr11
+#ifdef CONFIG_MMU
+	movsg		hsr0,gr4
+	sethi.p		%hi(HSR0_EXMMU),gr3
+	setlo		%lo(HSR0_EXMMU),gr3
+	andcc		gr3,gr4,gr0,icc0
+	bne		icc0,#0,2f
+
+	# need to use physical address
+	sethi.p		%hi(__page_offset),gr3
+	setlo		%lo(__page_offset),gr3
+	sub		gr11,gr3,gr11
+
+	# flush all tlb entries
+	setlos		#64,gr4
+	setlos.p	#PAGE_SIZE,gr5
+	setlos		#0,gr6
+1:
+	tlbpr		gr6,gr0,#6,#0
+	subicc.p	gr4,#1,gr4,icc0
+	add		gr6,gr5,gr6
+	bne		icc0,#2,1b
+
+	# need a temporary mapping for the current physical address we are
+	# using between time MMU is enabled and jump to virtual address is
+	# made.
+	sethi.p		%hi(0x00000000),gr4
+	setlo		%lo(0x00000000),gr4		; physical address
+	setlos		#xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr5
+	or		gr4,gr5,gr5
+
+	movsg		cxnr,gr13
+	or		gr4,gr13,gr4
+
+	movgs		gr4,iamlr1			; mapped from real address 0
+	movgs		gr5,iampr1			; cached kernel memory at 0x00000000
+2:
+#endif
+
+	lddi		@(gr11,#0),gr4 ; hsr0, psr
+	lddi		@(gr11,#8),gr6 ; isr, lr
+	movgs		gr4,hsr0
+	bar
+
+#ifdef CONFIG_MMU
+	sethi.p		%hi(1f),gr11
+	setlo		%lo(1f),gr11
+	jmpl		@(gr11,gr0)
+1:
+	movgs		gr0,iampr1 	; get rid of temporary mapping
+#endif
+	movgs		gr5,psr
+	movgs		gr6,isr
+
+	#----------------------------------------------------
+	# unlock the icache which was locked before going to sleep
+	#----------------------------------------------------
+	li		__icache_lock_start,gr3
+	li		__icache_lock_end,gr4
+1:	icul		gr3
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	#----------------------------------------------------
+	# back to business as usual
+	#----------------------------------------------------
+	jmpl		@(gr7,gr0)		;
+
+#endif /* CONFIG_PM */
+
+###############################################################################
+#
+# CPU core sleep mode routine
+#
+###############################################################################
+	.globl		frv_cpu_core_sleep
+        .type		frv_cpu_core_sleep,@function
+frv_cpu_core_sleep:
+
+	# Preload into icache.
+	li		#__core_sleep_icache_lock_start,gr3
+	li		#__core_sleep_icache_lock_end,gr4
+
+1:	icpl		gr3,gr0,#1
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	bra	__core_sleep_icache_lock_start
+
+	.balign L1_CACHE_BYTES
+__core_sleep_icache_lock_start:
+
+	# (1) Set the PSR register ET bit to 0 to disable interrupts.
+	movsg		psr,gr8
+	andi.p		gr8,#~(PSR_PIL),gr8
+	andi		gr8,#~(PSR_ET),gr4
+	movgs		gr4,psr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (2) Set '1' to all bits in the MASK register of the interrupt
+	#     controller and mask interrupts.
+	sethi.p		%hi(__addr_MASK),gr9
+	setlo		%lo(__addr_MASK),gr9
+	sethi.p		%hi(0xffff0000),gr4
+	setlo		%lo(0xffff0000),gr4
+	ldi		@(gr9,#0),gr10
+	sti		gr4,@(gr9,#0)
+#endif
+	# (3) Flush all data in the cache using the DCEF instruction.
+	dcef		@(gr0,gr0),#1
+
+	# (4) Execute the memory barrier instruction
+	membar
+
+	# (5) Set the GPIO register so that the IRQ[3:0] pins become valid, as required.
+	# (6) Set the clock mode (CLKC register) as required.
+	#     - At this time, also set the CLKC register P0 bit.
+	# (7) Set the HSR0 register PDM field to  001 .
+	movsg		hsr0,gr4
+	ori		gr4,HSR0_PDM_CORE_SLEEP,gr4
+	movgs		gr4,hsr0
+
+	# (8) Execute NOP 32 times.
+	.rept		32
+	nop
+	.endr
+
+#if 0 // Fujitsu recommend to skip this and will update docs.
+	# (9) Release the interrupt mask setting of the MASK register of the
+	#     interrupt controller if necessary.
+	sti		gr10,@(gr9,#0)
+	membar
+#endif
+
+	# (10) Set the PSR register ET bit to 1 to enable interrupts.
+	movgs		gr8,psr
+
+__core_sleep_icache_lock_end:
+
+	# Unlock from icache
+	li	__core_sleep_icache_lock_start,gr3
+	li	__core_sleep_icache_lock_end,gr4
+1:	icul		gr3
+	addi		gr3,#L1_CACHE_BYTES,gr3
+	cmp		gr4,gr3,icc0
+	bhi		icc0,#0,1b
+
+	bralr
+
+	.size		frv_cpu_core_sleep, .-frv_cpu_core_sleep