CRIS: Merge machine dependent boot/compressed and boot/rescue

Merge the machine dependent boot directories for v10 and v32.
This avoids some code duplication and eases the way for further
merging later on.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

1 files changed, 126 insertions, 0 deletions

diff --git a/arch/cris/boot/compressed/head_v10.S b/arch/cris/boot/compressed/head_v10.S
new file mode 100644
index 000000000000..9edb8ade7e1f
--- /dev/null
+++ b/arch/cris/boot/compressed/head_v10.S
@@ -0,0 +1,126 @@
+/*
+ *  arch/cris/boot/compressed/head.S
+ *
+ *  Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ *  Code that sets up the DRAM registers, calls the
+ *  decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+	;; Exported symbols
+
+	.globl	input_data
+
+
+	.text
+
+	nop
+	di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
+	beq	dram_init_finished
+	nop
+
+#include "../../arch-v10/lib/dram_init.S"
+
+dram_init_finished:
+
+	;; Initiate the PA and PB ports
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b   $r0, [R_PORT_PA_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b   $r0, [R_PORT_PA_DIR]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b   $r0, [R_PORT_PB_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b   $r0, [R_PORT_PB_DIR]
+
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM in an eLinux
+	;; product and put the sp at the top for now.
+
+	move.d	0x40800000, $sp
+
+	;; Figure out where the compressed piggyback image is
+	;; in the flash (since we wont try to copy it to DRAM
+	;; before unpacking). It is at _edata, but in flash.
+	;; Use (_edata - basse) as offset to the current PC.
+
+basse:	move.d	$pc, $r5
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	subq	2, $r5		; compensate for the move.d $pc instr
+	move.d	$r5, $r0		; save for later - flash address of 'basse'
+	add.d	_edata, $r5
+	sub.d	basse, $r5	; $r5 = flash address of '_edata'
+
+	;; Copy text+data to DRAM
+
+	move.d	basse, $r1	; destination
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	move.d	$r5, [input_data] ; for the decompressor
+
+
+	;; Clear the decompressors BSS (between _edata and _end)
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	;;  Save command line magic and address.
+	move.d	_cmd_line_magic, $r12
+	move.d  $r10, [$r12]
+	move.d	_cmd_line_addr, $r12
+	move.d  $r11, [$r12]
+
+	;; Do the decompression and save compressed size in inptr
+
+	jsr	decompress_kernel
+
+	;; Put start address of root partition in $r9 so the kernel can use it
+	;; when mounting from flash
+
+	move.d	[input_data], $r9	; flash address of compressed kernel
+	add.d	[inptr], $r9		; size of compressed kernel
+
+	;; Restore command line magic and address.
+	move.d  _cmd_line_magic, $r10
+	move.d  [$r10], $r10
+	move.d  _cmd_line_addr, $r11
+	move.d  [$r11], $r11
+
+	;; Enter the decompressed kernel
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
+	jump	0x40004000	; kernel is linked to this address
+
+	.data
+
+input_data:
+	.dword	0		; used by the decompressor
+_cmd_line_magic:
+	.dword 0
+_cmd_line_addr:
+	.dword 0
+#include "../../arch-v10/lib/hw_settings.S"