/spare/repo/netdev-2.6 branch 'ieee80211'

14 files changed, 8292 insertions, 0 deletions

diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
new file mode 100644
index 000000000000..a33097f95362
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -0,0 +1,625 @@
+config ETRAX_ETHERNET
+	bool "Ethernet support"
+	depends on ETRAX_ARCH_V32
+	select NET_ETHERNET
+	help
+	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet
+	  controller.
+
+config ETRAX_ETHERNET_HW_CSUM
+	bool "Hardware accelerated ethernet checksum and scatter/gather"
+	depends on ETRAX_ETHERNET
+	depends on ETRAX_STREAMCOPROC
+	default y
+	help
+	  Hardware acceleration of checksumming and scatter/gather
+
+config ETRAX_ETHERNET_IFACE0
+	depends on ETRAX_ETHERNET
+	bool "Enable network interface 0"
+
+config ETRAX_ETHERNET_IFACE1
+	depends on ETRAX_ETHERNET
+	bool "Enable network interface 1 (uses DMA6 and DMA7)"
+
+choice
+	prompt "Network LED behavior"
+	depends on ETRAX_ETHERNET
+	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+
+config ETRAX_NETWORK_LED_ON_WHEN_LINK
+	bool "LED_on_when_link"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+	bool "LED_on_when_activity"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+endchoice
+
+config ETRAXFS_SERIAL
+	bool "Serial-port support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enables the ETRAX FS serial driver for ser0 (ttyS0)
+	  You probably want this enabled.
+
+config ETRAX_SERIAL_PORT0
+	bool "Serial port 0 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser0 (ttyS0)
+	  Normally you want this on. You can control what DMA channels to use
+	  if you do not need DMA to something else.
+	  ser0 can use dma4 or dma6 for output and dma5 or dma7 for input.
+
+choice
+	prompt "Ser0 DMA in channel "
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_NO_DMA_IN
+	help
+	  What DMA channel to use for ser0.
+
+
+config ETRAX_SERIAL_PORT0_NO_DMA_IN
+	bool "Ser0 uses no DMA for input"
+	help
+	  Do not use DMA for ser0 input.
+
+config ETRAX_SERIAL_PORT0_DMA7_IN
+	bool "Ser0 uses DMA7 for input"
+	depends on ETRAX_SERIAL_PORT0
+	help
+	  Enables the DMA7 input channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser0 DMA out channel"
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT0_NO_DMA_OUT
+	bool "Ser0 uses no DMA for output"
+	help
+	  Do not use DMA for ser0 output.
+
+config ETRAX_SERIAL_PORT0_DMA6_OUT
+	bool "Ser0 uses DMA6 for output"
+	depends on ETRAX_SERIAL_PORT0
+	help
+	  Enables the DMA6 output channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER0_DTR_BIT
+	string "Ser 0 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_RI_BIT
+	string "Ser 0 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_DSR_BIT
+	string "Ser 0 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_CD_BIT
+	string "Ser 0 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SERIAL_PORT1
+	bool "Serial port 1 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser1 (ttyS1).
+
+choice
+	prompt "Ser1 DMA in channel "
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_IN
+	help
+	  What DMA channel to use for ser1.
+
+
+config ETRAX_SERIAL_PORT1_NO_DMA_IN
+	bool "Ser1 uses no DMA for input"
+	help
+	  Do not use DMA for ser1 input.
+
+config ETRAX_SERIAL_PORT1_DMA5_IN
+	bool "Ser1 uses DMA5 for input"
+	depends on ETRAX_SERIAL_PORT1
+	help
+	  Enables the DMA5 input channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser1 DMA out channel "
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_OUT
+	help
+	  What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_OUT
+	bool "Ser1 uses no DMA for output"
+	help
+	  Do not use DMA for ser1 output.
+
+config ETRAX_SERIAL_PORT1_DMA4_OUT
+	bool "Ser1 uses DMA4 for output"
+	depends on ETRAX_SERIAL_PORT1
+	help
+	  Enables the DMA4 output channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER1_DTR_BIT
+	string "Ser 1 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_RI_BIT
+	string "Ser 1 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_DSR_BIT
+	string "Ser 1 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_CD_BIT
+	string "Ser 1 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SERIAL_PORT2
+	bool "Serial port 2 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser2 (ttyS2).
+
+choice
+	prompt "Ser2 DMA in channel "
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_IN
+	help
+	  What DMA channel to use for ser2.
+
+
+config ETRAX_SERIAL_PORT2_NO_DMA_IN
+	bool "Ser2 uses no DMA for input"
+	help
+	  Do not use DMA for ser2 input.
+
+config ETRAX_SERIAL_PORT2_DMA3_IN
+	bool "Ser2 uses DMA3 for input"
+	depends on ETRAX_SERIAL_PORT2
+	help
+	  Enables the DMA3 input channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser2 DMA out channel"
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT2_NO_DMA_OUT
+	bool "Ser2 uses no DMA for output"
+	help
+	  Do not use DMA for ser2 output.
+
+config ETRAX_SERIAL_PORT2_DMA2_OUT
+	bool "Ser2 uses DMA2 for output"
+	depends on ETRAX_SERIAL_PORT2
+	help
+	  Enables the DMA2 output channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER2_DTR_BIT
+	string "Ser 2 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_RI_BIT
+	string "Ser 2 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_DSR_BIT
+	string "Ser 2 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_CD_BIT
+	string "Ser 2 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SERIAL_PORT3
+	bool "Serial port 3 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser3 (ttyS3).
+
+choice
+	prompt "Ser3 DMA in channel "
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_IN
+	help
+	  What DMA channel to use for ser3.
+
+
+config ETRAX_SERIAL_PORT3_NO_DMA_IN
+	bool "Ser3 uses no DMA for input"
+	help
+	  Do not use DMA for ser3 input.
+
+config ETRAX_SERIAL_PORT3_DMA9_IN
+	bool "Ser3 uses DMA9 for input"
+	depends on ETRAX_SERIAL_PORT3
+	help
+	  Enables the DMA9 input channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser3 DMA out channel"
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT3_NO_DMA_OUT
+	bool "Ser3 uses no DMA for output"
+	help
+	  Do not use DMA for ser3 output.
+
+config ETRAX_SERIAL_PORT3_DMA8_OUT
+	bool "Ser3 uses DMA8 for output"
+	depends on ETRAX_SERIAL_PORT3
+	help
+	  Enables the DMA8 output channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER3_DTR_BIT
+	string "Ser 3 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_RI_BIT
+	string "Ser 3 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_DSR_BIT
+	string "Ser 3 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_CD_BIT
+	string "Ser 3 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_RS485
+	bool "RS-485 support"
+	depends on ETRAX_SERIAL
+	help
+	  Enables support for RS-485 serial communication.  For a primer on
+	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+
+config ETRAX_RS485_DISABLE_RECEIVER
+	bool "Disable serial receiver"
+	depends on ETRAX_RS485
+	help
+	  It is necessary to disable the serial receiver to avoid serial
+	  loopback.  Not all products are able to do this in software only.
+	  Axis 2400/2401 must disable receiver.
+
+config ETRAX_AXISFLASHMAP
+	bool "Axis flash-map support"
+	depends on ETRAX_ARCH_V32
+	select MTD
+	select MTD_CFI
+	select MTD_CFI_AMDSTD
+	select MTD_OBSOLETE_CHIPS
+	select MTD_AMDSTD
+	select MTD_CHAR
+	select MTD_BLOCK
+	select MTD_PARTITIONS
+	select MTD_CONCAT
+	select MTD_COMPLEX_MAPPINGS
+	help
+	  This option enables MTD mapping of flash devices.  Needed to use
+	  flash memories.  If unsure, say Y.
+
+config ETRAX_SYNCHRONOUS_SERIAL
+	bool "Synchronous serial-port support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enables the ETRAX FS synchronous serial driver.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
+         bool "Synchronous serial port 0 enabled"
+         depends on ETRAX_SYNCHRONOUS_SERIAL
+         help
+           Enabled synchronous serial port 0.
+
+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
+         bool "Enable DMA on synchronous serial port 0."
+         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
+         help
+           A synchronous serial port can run in manual or DMA mode.
+           Selecting this option will make it run in DMA mode.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
+         bool "Synchronous serial port 1 enabled"
+         depends on ETRAX_SYNCHRONOUS_SERIAL
+         help
+           Enabled synchronous serial port 1.
+
+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
+         bool "Enable DMA on synchronous serial port 1."
+         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
+         help
+           A synchronous serial port can run in manual or DMA mode.
+           Selecting this option will make it run in DMA mode.
+
+config ETRAX_PTABLE_SECTOR
+	int "Byte-offset of partition table sector"
+	depends on ETRAX_AXISFLASHMAP
+	default "65536"
+	help
+	  Byte-offset of the partition table in the first flash chip.
+	  The default value is 64kB and should not be changed unless
+	  you know exactly what you are doing. The only valid reason
+	  for changing this is when the flash block size is bigger
+	  than 64kB (e.g. when using two parallel 16 bit flashes).
+
+config ETRAX_NANDFLASH
+	bool "NAND flash support"
+	depends on ETRAX_ARCH_V32
+	select MTD_NAND
+	select MTD_NAND_IDS
+	help
+	  This option enables MTD mapping of NAND flash devices.  Needed to use
+	  NAND flash memories.  If unsure, say Y.
+
+config ETRAX_I2C
+	bool "I2C driver"
+	depends on ETRAX_ARCH_V32
+	help
+	  This option enabled the I2C driver used by e.g. the RTC driver.
+
+config ETRAX_I2C_DATA_PORT
+	string "I2C data pin"
+	depends on ETRAX_I2C
+	help
+	  The pin to use for I2C data.
+
+config ETRAX_I2C_CLK_PORT
+	string "I2C clock pin"
+	depends on ETRAX_I2C
+	help
+	  The pin to use for I2C clock.
+
+config ETRAX_RTC
+	bool "Real Time Clock support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enabled RTC support.
+
+choice
+	prompt "RTC chip"
+	depends on ETRAX_RTC
+	default ETRAX_PCF8563
+
+config ETRAX_PCF8563
+	bool "PCF8563"
+	help
+	  Philips PCF8563 RTC
+
+endchoice
+
+config ETRAX_GPIO
+	bool "GPIO support"
+	depends on ETRAX_ARCH_V32
+	---help---
+	  Enables the ETRAX general port device (major 120, minors 0-4).
+	  You can use this driver to access the general port bits. It supports
+	  these ioctl's:
+	  #include <linux/etraxgpio.h>
+	  fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
+	  err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
+	  Remember that you need to setup the port directions appropriately in
+	  the General configuration.
+
+config ETRAX_PA_BUTTON_BITMASK
+	hex "PA-buttons bitmask"
+	depends on ETRAX_GPIO
+	default "0x02"
+	help
+	  This is a bitmask (8 bits) with information about what bits on PA
+	  that are used for buttons.
+	  Most products has a so called TEST button on PA1, if that is true
+	  use 0x02 here.
+	  Use 00 if there are no buttons on PA.
+	  If the bitmask is <> 00 a button driver will be included in the gpio
+	  driver. ETRAX general I/O support must be enabled.
+
+config ETRAX_PA_CHANGEABLE_DIR
+	hex "PA user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00"
+	help
+	  This is a bitmask (8 bits) with information of what bits in PA that a
+	  user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00 here, but it depends on your hardware.
+
+config ETRAX_PA_CHANGEABLE_BITS
+	hex "PA user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00"
+	help
+	  This is a bitmask (8 bits) with information of what bits in PA
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PB_CHANGEABLE_DIR
+	hex "PB user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PB
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PB_CHANGEABLE_BITS
+	hex "PB user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PB
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PC_CHANGEABLE_DIR
+	hex "PC user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PC
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PC_CHANGEABLE_BITS
+	hex "PC user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PC
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PD_CHANGEABLE_DIR
+	hex "PD user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PD
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PD_CHANGEABLE_BITS
+	hex "PD user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PD
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PE_CHANGEABLE_DIR
+	hex "PE user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PE
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PE_CHANGEABLE_BITS
+	hex "PE user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PE
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_IDE
+	bool "ATA/IDE support"
+	depends on ETRAX_ARCH_V32
+	select IDE
+	select BLK_DEV_IDE
+	select BLK_DEV_IDEDISK
+	select BLK_DEV_IDECD
+	select BLK_DEV_IDEDMA
+	help
+	  Enables the ETRAX IDE driver.
+
+config ETRAX_CARDBUS
+        bool "Cardbus support"
+        depends on ETRAX_ARCH_V32
+        select PCCARD
+        select CARDBUS
+        select HOTPLUG
+        select PCCARD_NONSTATIC
+        help
+	 Enabled the ETRAX Carbus driver.
+
+config PCI
+       bool
+       depends on ETRAX_CARDBUS
+       default y
+
+config ETRAX_IOP_FW_LOAD
+	tristate "IO-processor hotplug firmware loading support"
+	depends on ETRAX_ARCH_V32
+	select FW_LOADER
+	help
+	  Enables IO-processor hotplug firmware loading support.
+
+config ETRAX_STREAMCOPROC
+	tristate "Stream co-processor driver enabled"
+	depends on ETRAX_ARCH_V32
+	help
+	  This option enables a driver for the stream co-processor
+	  for cryptographic operations.
diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile
new file mode 100644
index 000000000000..a359cd20ae75
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_STREAMCOPROC)        += cryptocop.o
+obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
+obj-$(CONFIG_ETRAX_NANDFLASH)           += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO) 	        += gpio.o
+obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
+obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
+obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
+obj-$(CONFIG_PCI)			+= pci/
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
new file mode 100644
index 000000000000..78ed52b1cdac
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -0,0 +1,455 @@
+/*
+ * Physical mapping layer for MTD using the Axis partitiontable format
+ *
+ * Copyright (c) 2001, 2002, 2003 Axis Communications AB
+ *
+ * This file is under the GPL.
+ *
+ * First partition is always sector 0 regardless of if we find a partitiontable
+ * or not. In the start of the next sector, there can be a partitiontable that
+ * tells us what other partitions to define. If there isn't, we use a default
+ * partition split defined below.
+ *
+ * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5
+ * with minor changes.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mtd/concat.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/mtdram.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/hwregs/config_defs.h>
+#include <asm/axisflashmap.h>
+#include <asm/mmu.h>
+
+#define MEM_CSE0_SIZE (0x04000000)
+#define MEM_CSE1_SIZE (0x04000000)
+
+#define FLASH_UNCACHED_ADDR  KSEG_E
+#define FLASH_CACHED_ADDR    KSEG_F
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==1
+#define flash_data __u8
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define flash_data __u16
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
+#define flash_data __u16
+#endif
+
+/* From head.S */
+extern unsigned long romfs_start, romfs_length, romfs_in_flash;
+
+/* The master mtd for the entire flash. */
+struct mtd_info* axisflash_mtd = NULL;
+
+/* Map driver functions. */
+
+static map_word flash_read(struct map_info *map, unsigned long ofs)
+{
+	map_word tmp;
+	tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs);
+	return tmp;
+}
+
+static void flash_copy_from(struct map_info *map, void *to,
+			    unsigned long from, ssize_t len)
+{
+	memcpy(to, (void *)(map->map_priv_1 + from), len);
+}
+
+static void flash_write(struct map_info *map, map_word d, unsigned long adr)
+{
+	*(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0];
+}
+
+/*
+ * The map for chip select e0.
+ *
+ * We run into tricky coherence situations if we mix cached with uncached
+ * accesses to we only use the uncached version here.
+ *
+ * The size field is the total size where the flash chips may be mapped on the
+ * chip select. MTD probes should find all devices there and it does not matter
+ * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD
+ * probes will ignore them.
+ *
+ * The start address in map_priv_1 is in virtual memory so we cannot use
+ * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start
+ * address of cse0.
+ */
+static struct map_info map_cse0 = {
+	.name = "cse0",
+	.size = MEM_CSE0_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR
+};
+
+/*
+ * The map for chip select e1.
+ *
+ * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong
+ * address, but there isn't.
+ */
+static struct map_info map_cse1 = {
+	.name = "cse1",
+	.size = MEM_CSE1_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE
+};
+
+/* If no partition-table was found, we use this default-set. */
+#define MAX_PARTITIONS         7
+#define NUM_DEFAULT_PARTITIONS 3
+
+/*
+ * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+ * size of one flash block and "filesystem"-partition needs 5 blocks to be able
+ * to use JFFS.
+ */
+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+	{
+		.name = "boot firmware",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "kernel",
+		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+		.offset = CONFIG_ETRAX_PTABLE_SECTOR
+	},
+	{
+		.name = "filesystem",
+		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
+	}
+};
+
+/* Initialize the ones normally used. */
+static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
+	{
+		.name = "part0",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "part1",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part2",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part3",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part4",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part5",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part6",
+		.size = 0,
+		.offset = 0
+	},
+};
+
+/*
+ * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
+ * chips in that order (because the amd_flash-driver is faster).
+ */
+static struct mtd_info *probe_cs(struct map_info *map_cs)
+{
+	struct mtd_info *mtd_cs = NULL;
+
+	printk(KERN_INFO
+	       "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
+	       map_cs->name, map_cs->size, map_cs->map_priv_1);
+
+#ifdef CONFIG_MTD_AMDSTD
+	mtd_cs = do_map_probe("amd_flash", map_cs);
+#endif
+#ifdef CONFIG_MTD_CFI
+	if (!mtd_cs) {
+		mtd_cs = do_map_probe("cfi_probe", map_cs);
+	}
+#endif
+
+	return mtd_cs;
+}
+
+/*
+ * Probe each chip select individually for flash chips. If there are chips on
+ * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
+ * so that MTD partitions can cross chip boundries.
+ *
+ * The only known restriction to how you can mount your chips is that each
+ * chip select must hold similar flash chips. But you need external hardware
+ * to do that anyway and you can put totally different chips on cse0 and cse1
+ * so it isn't really much of a restriction.
+ */
+extern struct mtd_info* __init crisv32_nand_flash_probe (void);
+static struct mtd_info *flash_probe(void)
+{
+	struct mtd_info *mtd_cse0;
+	struct mtd_info *mtd_cse1;
+	struct mtd_info *mtd_nand = NULL;
+	struct mtd_info *mtd_total;
+	struct mtd_info *mtds[3];
+	int count = 0;
+
+	if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL)
+		mtds[count++] = mtd_cse0;
+	if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL)
+		mtds[count++] = mtd_cse1;
+
+#ifdef CONFIG_ETRAX_NANDFLASH
+	if ((mtd_nand = crisv32_nand_flash_probe()) != NULL)
+		mtds[count++] = mtd_nand;
+#endif
+
+	if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) {
+		/* No chip found. */
+		return NULL;
+	}
+
+	if (count > 1) {
+#ifdef CONFIG_MTD_CONCAT
+		/* Since the concatenation layer adds a small overhead we
+		 * could try to figure out if the chips in cse0 and cse1 are
+		 * identical and reprobe the whole cse0+cse1 window. But since
+		 * flash chips are slow, the overhead is relatively small.
+		 * So we use the MTD concatenation layer instead of further
+		 * complicating the probing procedure.
+		 */
+		mtd_total = mtd_concat_create(mtds,
+		                              count,
+		                              "cse0+cse1+nand");
+#else
+		printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
+		       "(mis)configuration!\n", map_cse0.name, map_cse1.name);
+		mtd_toal = NULL;
+#endif
+		if (!mtd_total) {
+			printk(KERN_ERR "%s and %s: Concatenation failed!\n",
+			       map_cse0.name, map_cse1.name);
+
+			/* The best we can do now is to only use what we found
+			 * at cse0.
+			 */
+			mtd_total = mtd_cse0;
+			map_destroy(mtd_cse1);
+		}
+	} else {
+		mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand;
+
+	}
+
+	return mtd_total;
+}
+
+extern unsigned long crisv32_nand_boot;
+extern unsigned long crisv32_nand_cramfs_offset;
+
+/*
+ * Probe the flash chip(s) and, if it succeeds, read the partition-table
+ * and register the partitions with MTD.
+ */
+static int __init init_axis_flash(void)
+{
+	struct mtd_info *mymtd;
+	int err = 0;
+	int pidx = 0;
+	struct partitiontable_head *ptable_head = NULL;
+	struct partitiontable_entry *ptable;
+	int use_default_ptable = 1; /* Until proven otherwise. */
+	const char *pmsg = KERN_INFO "  /dev/flash%d at 0x%08x, size 0x%08x\n";
+	static char page[512];
+	size_t len;
+
+#ifndef CONFIG_ETRAXFS_SIM
+	mymtd = flash_probe();
+	mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page);
+	ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET);
+
+	if (!mymtd) {
+		/* There's no reason to use this module if no flash chip can
+		 * be identified. Make sure that's understood.
+		 */
+		printk(KERN_INFO "axisflashmap: Found no flash chip.\n");
+	} else {
+		printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n",
+		       mymtd->name, mymtd->size);
+		axisflash_mtd = mymtd;
+	}
+
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+	}
+	pidx++;  /* First partition is always set to the default. */
+
+	if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC)
+	    && (ptable_head->size <
+		(MAX_PARTITIONS * sizeof(struct partitiontable_entry) +
+		PARTITIONTABLE_END_MARKER_SIZE))
+	    && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) +
+				  ptable_head->size -
+				  PARTITIONTABLE_END_MARKER_SIZE)
+		== PARTITIONTABLE_END_MARKER)) {
+		/* Looks like a start, sane length and end of a
+		 * partition table, lets check csum etc.
+		 */
+		int ptable_ok = 0;
+		struct partitiontable_entry *max_addr =
+			(struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head) +
+			 ptable_head->size);
+		unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
+		unsigned char *p;
+		unsigned long csum = 0;
+
+		ptable = (struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head));
+
+		/* Lets be PARANOID, and check the checksum. */
+		p = (unsigned char*) ptable;
+
+		while (p <= (unsigned char*)max_addr) {
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+		}
+		ptable_ok = (csum == ptable_head->checksum);
+
+		/* Read the entries and use/show the info.  */
+		printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n",
+		       (ptable_ok ? " valid" : "n invalid"), ptable_head,
+		       max_addr);
+
+		/* We have found a working bootblock.  Now read the
+		 * partition table.  Scan the table.  It ends when
+		 * there is 0xffffffff, that is, empty flash.
+		 */
+		while (ptable_ok
+		       && ptable->offset != 0xffffffff
+		       && ptable < max_addr
+		       && pidx < MAX_PARTITIONS) {
+
+			axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0);
+			axis_partitions[pidx].size = ptable->size;
+
+			printk(pmsg, pidx, axis_partitions[pidx].offset,
+			       axis_partitions[pidx].size);
+			pidx++;
+			ptable++;
+		}
+		use_default_ptable = !ptable_ok;
+	}
+
+	if (romfs_in_flash) {
+		/* Add an overlapping device for the root partition (romfs). */
+
+		axis_partitions[pidx].name = "romfs";
+		if (crisv32_nand_boot) {
+			char* data = kmalloc(1024, GFP_KERNEL);
+			int len;
+			int offset = crisv32_nand_cramfs_offset & ~(1024-1);
+			char* tmp;
+
+			mymtd->read(mymtd, offset, 1024, &len, data);
+			tmp = &data[crisv32_nand_cramfs_offset % 512];
+			axis_partitions[pidx].size = *(unsigned*)(tmp + 4);
+			axis_partitions[pidx].offset = crisv32_nand_cramfs_offset;
+			kfree(data);
+		} else {
+			axis_partitions[pidx].size = romfs_length;
+			axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
+		}
+
+		axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
+
+		printk(KERN_INFO
+                       " Adding readonly flash partition for romfs image:\n");
+		printk(pmsg, pidx, axis_partitions[pidx].offset,
+		       axis_partitions[pidx].size);
+		pidx++;
+	}
+
+        if (mymtd) {
+		if (use_default_ptable) {
+			printk(KERN_INFO " Using default partition table.\n");
+			err = add_mtd_partitions(mymtd, axis_default_partitions,
+						 NUM_DEFAULT_PARTITIONS);
+		} else {
+			err = add_mtd_partitions(mymtd, axis_partitions, pidx);
+		}
+
+		if (err) {
+			panic("axisflashmap could not add MTD partitions!\n");
+		}
+	}
+/* CONFIG_EXTRAXFS_SIM */
+#endif
+
+	if (!romfs_in_flash) {
+		/* Create an RAM device for the root partition (romfs). */
+
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+		/* No use trying to boot this kernel from RAM. Panic! */
+		printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
+		       "device due to kernel (mis)configuration!\n");
+		panic("This kernel cannot boot from RAM!\n");
+#else
+		struct mtd_info *mtd_ram;
+
+		mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
+						     GFP_KERNEL);
+		if (!mtd_ram) {
+			panic("axisflashmap couldn't allocate memory for "
+			      "mtd_info!\n");
+		}
+
+		printk(KERN_INFO " Adding RAM partition for romfs image:\n");
+		printk(pmsg, pidx, romfs_start, romfs_length);
+
+		err = mtdram_init_device(mtd_ram, (void*)romfs_start,
+		                         romfs_length, "romfs");
+		if (err) {
+			panic("axisflashmap could not initialize MTD RAM "
+			      "device!\n");
+		}
+#endif
+	}
+
+	return err;
+}
+
+/* This adds the above to the kernels init-call chain. */
+module_init(init_axis_flash);
+
+EXPORT_SYMBOL(axisflash_mtd);
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
new file mode 100644
index 000000000000..ca72076c630a
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -0,0 +1,3522 @@
+/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $
+ *
+ * Stream co-processor driver for the ETRAX FS
+ *
+ *    Copyright (C) 2003-2005  Axis Communications AB
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+
+#include <linux/list.h>
+#include <linux/interrupt.h>
+
+#include <asm/signal.h>
+#include <asm/irq.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/hwregs/dma.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+#include <asm/arch/hwregs/strcop.h>
+#include <asm/arch/hwregs/strcop_defs.h>
+#include <asm/arch/cryptocop.h>
+
+
+
+#define DESCR_ALLOC_PAD  (31)
+
+struct cryptocop_dma_desc {
+	char *free_buf; /* If non-null will be kfreed in free_cdesc() */
+	dma_descr_data *dma_descr;
+
+	unsigned char dma_descr_buf[sizeof(dma_descr_data) + DESCR_ALLOC_PAD];
+
+	unsigned int from_pool:1; /* If 1 'allocated' from the descriptor pool. */
+	struct cryptocop_dma_desc *next;
+};
+
+
+struct cryptocop_int_operation{
+	void                        *alloc_ptr;
+	cryptocop_session_id        sid;
+
+	dma_descr_context           ctx_out;
+	dma_descr_context           ctx_in;
+
+	/* DMA descriptors allocated by driver. */
+	struct cryptocop_dma_desc   *cdesc_out;
+	struct cryptocop_dma_desc   *cdesc_in;
+
+	/* Strcop config to use. */
+	cryptocop_3des_mode         tdes_mode;
+	cryptocop_csum_type         csum_mode;
+
+	/* DMA descrs provided by consumer. */
+	dma_descr_data              *ddesc_out;
+	dma_descr_data              *ddesc_in;
+};
+
+
+struct cryptocop_tfrm_ctx {
+	cryptocop_tfrm_id tid;
+	unsigned int blocklength;
+
+	unsigned int start_ix;
+
+	struct cryptocop_tfrm_cfg *tcfg;
+	struct cryptocop_transform_ctx *tctx;
+
+	unsigned char previous_src;
+	unsigned char current_src;
+
+	/* Values to use in metadata out. */
+	unsigned char hash_conf;
+	unsigned char hash_mode;
+	unsigned char ciph_conf;
+	unsigned char cbcmode;
+	unsigned char decrypt;
+
+	unsigned int requires_padding:1;
+	unsigned int strict_block_length:1;
+	unsigned int active:1;
+	unsigned int done:1;
+	size_t consumed;
+	size_t produced;
+
+	/* Pad (input) descriptors to put in the DMA out list when the transform
+	 * output is put on the DMA in list. */
+	struct cryptocop_dma_desc *pad_descs;
+
+	struct cryptocop_tfrm_ctx *prev_src;
+	struct cryptocop_tfrm_ctx *curr_src;
+
+	/* Mapping to HW. */
+	unsigned char unit_no;
+};
+
+
+struct cryptocop_private{
+	cryptocop_session_id sid;
+	struct cryptocop_private *next;
+};
+
+/* Session list. */
+
+struct cryptocop_transform_ctx{
+	struct cryptocop_transform_init init;
+	unsigned char dec_key[CRYPTOCOP_MAX_KEY_LENGTH];
+	unsigned int dec_key_set:1;
+
+	struct cryptocop_transform_ctx *next;
+};
+
+
+struct cryptocop_session{
+	cryptocop_session_id sid;
+
+	struct cryptocop_transform_ctx *tfrm_ctx;
+
+	struct cryptocop_session *next;
+};
+
+/* Priority levels for jobs sent to the cryptocop.  Checksum operations from
+   kernel have highest priority since TCPIP stack processing must not
+   be a bottleneck. */
+typedef enum {
+	cryptocop_prio_kernel_csum = 0,
+	cryptocop_prio_kernel = 1,
+	cryptocop_prio_user = 2,
+	cryptocop_prio_no_prios = 3
+} cryptocop_queue_priority;
+
+struct cryptocop_prio_queue{
+	struct list_head jobs;
+	cryptocop_queue_priority prio;
+};
+
+struct cryptocop_prio_job{
+	struct list_head node;
+	cryptocop_queue_priority prio;
+
+	struct cryptocop_operation *oper;
+	struct cryptocop_int_operation *iop;
+};
+
+struct ioctl_job_cb_ctx {
+	unsigned int processed:1;
+};
+
+
+static struct cryptocop_session *cryptocop_sessions = NULL;
+spinlock_t cryptocop_sessions_lock;
+
+/* Next Session ID to assign. */
+static cryptocop_session_id next_sid = 1;
+
+/* Pad for checksum. */
+static const char csum_zero_pad[1] = {0x00};
+
+/* Trash buffer for mem2mem operations. */
+#define MEM2MEM_DISCARD_BUF_LENGTH  (512)
+static unsigned char mem2mem_discard_buf[MEM2MEM_DISCARD_BUF_LENGTH];
+
+/* Descriptor pool. */
+/* FIXME Tweak this value. */
+#define CRYPTOCOP_DESCRIPTOR_POOL_SIZE   (100)
+static struct cryptocop_dma_desc descr_pool[CRYPTOCOP_DESCRIPTOR_POOL_SIZE];
+static struct cryptocop_dma_desc *descr_pool_free_list;
+static int descr_pool_no_free;
+static spinlock_t descr_pool_lock;
+
+/* Lock to stop cryptocop to start processing of a new operation. The holder
+   of this lock MUST call cryptocop_start_job() after it is unlocked. */
+spinlock_t cryptocop_process_lock;
+
+static struct cryptocop_prio_queue cryptocop_job_queues[cryptocop_prio_no_prios];
+static spinlock_t cryptocop_job_queue_lock;
+static struct cryptocop_prio_job *cryptocop_running_job = NULL;
+static spinlock_t running_job_lock;
+
+/* The interrupt handler appends completed jobs to this list. The scehduled
+ * tasklet removes them upon sending the response to the crypto consumer. */
+static struct list_head cryptocop_completed_jobs;
+static spinlock_t cryptocop_completed_jobs_lock;
+
+DECLARE_WAIT_QUEUE_HEAD(cryptocop_ioc_process_wq);
+
+
+/** Local functions. **/
+
+static int cryptocop_open(struct inode *, struct file *);
+
+static int cryptocop_release(struct inode *, struct file *);
+
+static int cryptocop_ioctl(struct inode *inode, struct file *file,
+			   unsigned int cmd, unsigned long arg);
+
+static void cryptocop_start_job(void);
+
+static int cryptocop_job_queue_insert(cryptocop_queue_priority prio, struct cryptocop_operation *operation);
+static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_operation *operation);
+
+static int cryptocop_job_queue_init(void);
+static void cryptocop_job_queue_close(void);
+
+static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length);
+
+static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length);
+
+static int transform_ok(struct cryptocop_transform_init *tinit);
+
+static struct cryptocop_session *get_session(cryptocop_session_id sid);
+
+static struct cryptocop_transform_ctx *get_transform_ctx(struct cryptocop_session *sess, cryptocop_tfrm_id tid);
+
+static void delete_internal_operation(struct cryptocop_int_operation *iop);
+
+static void get_aes_decrypt_key(unsigned char *dec_key, const unsigned  char *key, unsigned int keylength);
+
+static int init_stream_coprocessor(void);
+
+static void __exit exit_stream_coprocessor(void);
+
+/*#define LDEBUG*/
+#ifdef LDEBUG
+#define DEBUG(s) s
+#define DEBUG_API(s) s
+static void print_cryptocop_operation(struct cryptocop_operation *cop);
+static void print_dma_descriptors(struct cryptocop_int_operation *iop);
+static void print_strcop_crypto_op(struct strcop_crypto_op *cop);
+static void print_lock_status(void);
+static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op);
+#define assert(s) do{if (!(s)) panic(#s);} while(0);
+#else
+#define DEBUG(s)
+#define DEBUG_API(s)
+#define assert(s)
+#endif
+
+
+/* Transform constants. */
+#define DES_BLOCK_LENGTH   (8)
+#define AES_BLOCK_LENGTH   (16)
+#define MD5_BLOCK_LENGTH   (64)
+#define SHA1_BLOCK_LENGTH  (64)
+#define CSUM_BLOCK_LENGTH  (2)
+#define MD5_STATE_LENGTH   (16)
+#define SHA1_STATE_LENGTH  (20)
+
+/* The device number. */
+#define CRYPTOCOP_MAJOR    (254)
+#define CRYPTOCOP_MINOR    (0)
+
+
+
+struct file_operations cryptocop_fops = {
+	owner: THIS_MODULE,
+	open: cryptocop_open,
+	release: cryptocop_release,
+	ioctl: cryptocop_ioctl
+};
+
+
+static void free_cdesc(struct cryptocop_dma_desc *cdesc)
+{
+	DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool));
+	if (cdesc->free_buf) kfree(cdesc->free_buf);
+
+	if (cdesc->from_pool) {
+		unsigned long int flags;
+		spin_lock_irqsave(&descr_pool_lock, flags);
+		cdesc->next = descr_pool_free_list;
+		descr_pool_free_list = cdesc;
+		++descr_pool_no_free;
+		spin_unlock_irqrestore(&descr_pool_lock, flags);
+	} else {
+		kfree(cdesc);
+	}
+}
+
+
+static struct cryptocop_dma_desc *alloc_cdesc(int alloc_flag)
+{
+	int use_pool = (alloc_flag & GFP_ATOMIC) ? 1 : 0;
+	struct cryptocop_dma_desc *cdesc;
+
+	if (use_pool) {
+		unsigned long int flags;
+		spin_lock_irqsave(&descr_pool_lock, flags);
+		if (!descr_pool_free_list) {
+			spin_unlock_irqrestore(&descr_pool_lock, flags);
+			DEBUG_API(printk("alloc_cdesc: pool is empty\n"));
+			return NULL;
+		}
+		cdesc = descr_pool_free_list;
+		descr_pool_free_list = descr_pool_free_list->next;
+		--descr_pool_no_free;
+		spin_unlock_irqrestore(&descr_pool_lock, flags);
+		cdesc->from_pool = 1;
+	} else {
+		cdesc = kmalloc(sizeof(struct cryptocop_dma_desc), alloc_flag);
+		if (!cdesc) {
+			DEBUG_API(printk("alloc_cdesc: kmalloc\n"));
+			return NULL;
+		}
+		cdesc->from_pool = 0;
+	}
+	cdesc->dma_descr = (dma_descr_data*)(((unsigned long int)cdesc + offsetof(struct cryptocop_dma_desc, dma_descr_buf) + DESCR_ALLOC_PAD) & ~0x0000001F);
+
+	cdesc->next = NULL;
+
+	cdesc->free_buf = NULL;
+	cdesc->dma_descr->out_eop = 0;
+	cdesc->dma_descr->in_eop = 0;
+	cdesc->dma_descr->intr = 0;
+	cdesc->dma_descr->eol = 0;
+	cdesc->dma_descr->wait = 0;
+	cdesc->dma_descr->buf = NULL;
+	cdesc->dma_descr->after = NULL;
+
+	DEBUG_API(printk("alloc_cdesc: return 0x%p, cdesc->dma_descr=0x%p, from_pool=%d\n", cdesc, cdesc->dma_descr, cdesc->from_pool));
+	return cdesc;
+}
+
+
+static void setup_descr_chain(struct cryptocop_dma_desc *cd)
+{
+	DEBUG(printk("setup_descr_chain: entering\n"));
+	while (cd) {
+		if (cd->next) {
+			cd->dma_descr->next = (dma_descr_data*)virt_to_phys(cd->next->dma_descr);
+		} else {
+			cd->dma_descr->next = NULL;
+		}
+		cd = cd->next;
+	}
+	DEBUG(printk("setup_descr_chain: exit\n"));
+}
+
+
+/* Create a pad descriptor for the transform.
+ * Return -1 for error, 0 if pad created. */
+static int create_pad_descriptor(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **pad_desc, int alloc_flag)
+{
+	struct cryptocop_dma_desc        *cdesc = NULL;
+	int                              error = 0;
+	struct strcop_meta_out           mo = {
+		.ciphsel = src_none,
+		.hashsel = src_none,
+		.csumsel = src_none
+	};
+	char                             *pad;
+	size_t                           plen;
+
+	DEBUG(printk("create_pad_descriptor: start.\n"));
+	/* Setup pad descriptor. */
+
+	DEBUG(printk("create_pad_descriptor: setting up padding.\n"));
+	cdesc = alloc_cdesc(alloc_flag);
+	if (!cdesc){
+		DEBUG_API(printk("create_pad_descriptor: alloc pad desc\n"));
+		goto error_cleanup;
+	}
+	switch (tc->unit_no) {
+	case src_md5:
+		error = create_md5_pad(alloc_flag, tc->consumed, &pad, &plen);
+		if (error){
+			DEBUG_API(printk("create_pad_descriptor: create_md5_pad_failed\n"));
+			goto error_cleanup;
+		}
+		cdesc->free_buf = pad;
+		mo.hashsel = src_dma;
+		mo.hashconf = tc->hash_conf;
+		mo.hashmode = tc->hash_mode;
+		break;
+	case src_sha1:
+		error = create_sha1_pad(alloc_flag, tc->consumed, &pad, &plen);
+		if (error){
+			DEBUG_API(printk("create_pad_descriptor: create_sha1_pad_failed\n"));
+			goto error_cleanup;
+		}
+		cdesc->free_buf = pad;
+		mo.hashsel = src_dma;
+		mo.hashconf = tc->hash_conf;
+		mo.hashmode = tc->hash_mode;
+		break;
+	case src_csum:
+		if (tc->consumed % tc->blocklength){
+			pad = (char*)csum_zero_pad;
+			plen = 1;
+		} else {
+			pad = (char*)cdesc; /* Use any pointer. */
+			plen = 0;
+		}
+		mo.csumsel = src_dma;
+		break;
+	}
+	cdesc->dma_descr->wait = 1;
+	cdesc->dma_descr->out_eop = 1; /* Since this is a pad output is pushed.  EOP is ok here since the padded unit is the only one active. */
+	cdesc->dma_descr->buf = (char*)virt_to_phys((char*)pad);
+	cdesc->dma_descr->after = cdesc->dma_descr->buf + plen;
+
+	cdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo);
+	*pad_desc = cdesc;
+
+	return 0;
+
+ error_cleanup:
+	if (cdesc) free_cdesc(cdesc);
+	return -1;
+}
+
+
+static int setup_key_dl_desc(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **kd, int alloc_flag)
+{
+	struct cryptocop_dma_desc  *key_desc = alloc_cdesc(alloc_flag);
+	struct strcop_meta_out     mo = {0};
+
+	DEBUG(printk("setup_key_dl_desc\n"));
+
+	if (!key_desc) {
+		DEBUG_API(printk("setup_key_dl_desc: failed descriptor allocation.\n"));
+		return -ENOMEM;
+	}
+
+	/* Download key. */
+	if ((tc->tctx->init.alg == cryptocop_alg_aes) && (tc->tcfg->flags & CRYPTOCOP_DECRYPT)) {
+		/* Precook the AES decrypt key. */
+		if (!tc->tctx->dec_key_set){
+			get_aes_decrypt_key(tc->tctx->dec_key, tc->tctx->init.key, tc->tctx->init.keylen);
+			tc->tctx->dec_key_set = 1;
+		}
+		key_desc->dma_descr->buf = (char*)virt_to_phys(tc->tctx->dec_key);
+		key_desc->dma_descr->after = key_desc->dma_descr->buf + tc->tctx->init.keylen/8;
+	} else {
+		key_desc->dma_descr->buf = (char*)virt_to_phys(tc->tctx->init.key);
+		key_desc->dma_descr->after = key_desc->dma_descr->buf + tc->tctx->init.keylen/8;
+	}
+	/* Setup metadata. */
+	mo.dlkey = 1;
+	switch (tc->tctx->init.keylen) {
+	case 64:
+		mo.decrypt = 0;
+		mo.hashmode = 0;
+		break;
+	case 128:
+		mo.decrypt = 0;
+		mo.hashmode = 1;
+		break;
+	case 192:
+		mo.decrypt = 1;
+		mo.hashmode = 0;
+		break;
+	case 256:
+		mo.decrypt = 1;
+		mo.hashmode = 1;
+		break;
+	default:
+		break;
+	}
+	mo.ciphsel = mo.hashsel = mo.csumsel = src_none;
+	key_desc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo);
+
+	key_desc->dma_descr->out_eop = 1;
+	key_desc->dma_descr->wait = 1;
+	key_desc->dma_descr->intr = 0;
+
+	*kd = key_desc;
+	return 0;
+}
+
+static int setup_cipher_iv_desc(struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **id, int alloc_flag)
+{
+	struct cryptocop_dma_desc  *iv_desc = alloc_cdesc(alloc_flag);
+	struct strcop_meta_out     mo = {0};
+
+	DEBUG(printk("setup_cipher_iv_desc\n"));
+
+	if (!iv_desc) {
+		DEBUG_API(printk("setup_cipher_iv_desc: failed CBC IV descriptor allocation.\n"));
+		return -ENOMEM;
+	}
+	/* Download IV. */
+	iv_desc->dma_descr->buf = (char*)virt_to_phys(tc->tcfg->iv);
+	iv_desc->dma_descr->after = iv_desc->dma_descr->buf + tc->blocklength;
+
+	/* Setup metadata. */
+	mo.hashsel = mo.csumsel = src_none;
+	mo.ciphsel = src_dma;
+	mo.ciphconf = tc->ciph_conf;
+	mo.cbcmode = tc->cbcmode;
+
+	iv_desc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, mo);
+
+	iv_desc->dma_descr->out_eop = 0;
+	iv_desc->dma_descr->wait = 1;
+	iv_desc->dma_descr->intr = 0;
+
+	*id = iv_desc;
+	return 0;
+}
+
+/* Map the ouput length of the transform to operation output starting on the inject index. */
+static int create_input_descriptors(struct cryptocop_operation *operation, struct cryptocop_tfrm_ctx *tc, struct cryptocop_dma_desc **id, int alloc_flag)
+{
+	int                        err = 0;
+	struct cryptocop_dma_desc  head = {0};
+	struct cryptocop_dma_desc  *outdesc = &head;
+	size_t                     iov_offset = 0;
+	size_t                     out_ix = 0;
+	int                        outiov_ix = 0;
+	struct strcop_meta_in      mi = {0};
+
+	size_t                     out_length = tc->produced;
+	int                        rem_length;
+	int                        dlength;
+
+	assert(out_length != 0);
+	if (((tc->produced + tc->tcfg->inject_ix) > operation->tfrm_op.outlen) || (tc->produced && (operation->tfrm_op.outlen == 0))) {
+		DEBUG_API(printk("create_input_descriptors: operation outdata too small\n"));
+		return -EINVAL;
+	}
+	/* Traverse the out iovec until the result inject index is reached. */
+	while ((outiov_ix < operation->tfrm_op.outcount) && ((out_ix + operation->tfrm_op.outdata[outiov_ix].iov_len) <= tc->tcfg->inject_ix)){
+		out_ix += operation->tfrm_op.outdata[outiov_ix].iov_len;
+		outiov_ix++;
+	}
+	if (outiov_ix >= operation->tfrm_op.outcount){
+		DEBUG_API(printk("create_input_descriptors: operation outdata too small\n"));
+		return -EINVAL;
+	}
+	iov_offset = tc->tcfg->inject_ix - out_ix;
+	mi.dmasel = tc->unit_no;
+
+	/* Setup the output descriptors. */
+	while ((out_length > 0) && (outiov_ix < operation->tfrm_op.outcount)) {
+		outdesc->next = alloc_cdesc(alloc_flag);
+		if (!outdesc->next) {
+			DEBUG_API(printk("create_input_descriptors: alloc_cdesc\n"));
+			err = -ENOMEM;
+			goto error_cleanup;
+		}
+		outdesc = outdesc->next;
+		rem_length = operation->tfrm_op.outdata[outiov_ix].iov_len - iov_offset;
+		dlength = (out_length < rem_length) ? out_length : rem_length;
+
+		DEBUG(printk("create_input_descriptors:\n"
+			     "outiov_ix=%d, rem_length=%d, dlength=%d\n"
+			     "iov_offset=%d, outdata[outiov_ix].iov_len=%d\n"
+			     "outcount=%d, outiov_ix=%d\n",
+			     outiov_ix, rem_length, dlength, iov_offset, operation->tfrm_op.outdata[outiov_ix].iov_len, operation->tfrm_op.outcount, outiov_ix));
+
+		outdesc->dma_descr->buf = (char*)virt_to_phys(operation->tfrm_op.outdata[outiov_ix].iov_base + iov_offset);
+		outdesc->dma_descr->after = outdesc->dma_descr->buf + dlength;
+		outdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi);
+
+		out_length -= dlength;
+		iov_offset += dlength;
+		if (iov_offset >= operation->tfrm_op.outdata[outiov_ix].iov_len) {
+			iov_offset = 0;
+			++outiov_ix;
+		}
+	}
+	if (out_length > 0){
+		DEBUG_API(printk("create_input_descriptors: not enough room for output, %d remained\n", out_length));
+		err = -EINVAL;
+		goto error_cleanup;
+	}
+	/* Set sync in last descriptor. */
+	mi.sync = 1;
+	outdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi);
+
+	*id = head.next;
+	return 0;
+
+ error_cleanup:
+	while (head.next) {
+		outdesc = head.next->next;
+		free_cdesc(head.next);
+		head.next = outdesc;
+	}
+	return err;
+}
+
+
+static int create_output_descriptors(struct cryptocop_operation *operation, int *iniov_ix, int *iniov_offset, size_t desc_len, struct cryptocop_dma_desc **current_out_cdesc, struct strcop_meta_out *meta_out, int alloc_flag)
+{
+	while (desc_len != 0) {
+		struct cryptocop_dma_desc  *cdesc;
+		int                        rem_length = operation->tfrm_op.indata[*iniov_ix].iov_len - *iniov_offset;
+		int                        dlength = (desc_len < rem_length) ? desc_len : rem_length;
+
+		cdesc = alloc_cdesc(alloc_flag);
+		if (!cdesc) {
+			DEBUG_API(printk("create_output_descriptors: alloc_cdesc\n"));
+			return -ENOMEM;
+		}
+		(*current_out_cdesc)->next = cdesc;
+		(*current_out_cdesc) = cdesc;
+
+		cdesc->free_buf = NULL;
+
+		cdesc->dma_descr->buf = (char*)virt_to_phys(operation->tfrm_op.indata[*iniov_ix].iov_base + *iniov_offset);
+		cdesc->dma_descr->after = cdesc->dma_descr->buf + dlength;
+
+		desc_len -= dlength;
+		*iniov_offset += dlength;
+		assert(desc_len >= 0);
+		if (*iniov_offset >= operation->tfrm_op.indata[*iniov_ix].iov_len) {
+			*iniov_offset = 0;
+			++(*iniov_ix);
+			if (*iniov_ix > operation->tfrm_op.incount) {
+				DEBUG_API(printk("create_output_descriptors: not enough indata in operation."));
+				return  -EINVAL;
+			}
+		}
+		cdesc->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, (*meta_out));
+	} /* while (desc_len != 0) */
+	/* Last DMA descriptor gets a 'wait' bit to signal expected change in metadata. */
+	(*current_out_cdesc)->dma_descr->wait = 1; /* This will set extraneous WAIT in some situations, e.g. when padding hashes and checksums. */
+
+	return 0;
+}
+
+
+static int append_input_descriptors(struct cryptocop_operation *operation, struct cryptocop_dma_desc **current_in_cdesc, struct cryptocop_dma_desc **current_out_cdesc, struct cryptocop_tfrm_ctx *tc, int alloc_flag)
+{
+	DEBUG(printk("append_input_descriptors, tc=0x%p, unit_no=%d\n", tc, tc->unit_no));
+	if (tc->tcfg) {
+		int                        failed = 0;
+		struct cryptocop_dma_desc  *idescs = NULL;
+		DEBUG(printk("append_input_descriptors: pushing output, consumed %d produced %d bytes.\n", tc->consumed, tc->produced));
+		if (tc->pad_descs) {
+			DEBUG(printk("append_input_descriptors: append pad descriptors to DMA out list.\n"));
+			while (tc->pad_descs) {
+				DEBUG(printk("append descriptor 0x%p\n", tc->pad_descs));
+				(*current_out_cdesc)->next = tc->pad_descs;
+				tc->pad_descs = tc->pad_descs->next;
+				(*current_out_cdesc) = (*current_out_cdesc)->next;
+			}
+		}
+
+		/* Setup and append output descriptors to DMA in list. */
+		if (tc->unit_no == src_dma){
+			/* mem2mem.  Setup DMA in descriptors to discard all input prior to the requested mem2mem data. */
+			struct strcop_meta_in mi = {.sync = 0, .dmasel = src_dma};
+			unsigned int start_ix = tc->start_ix;
+			while (start_ix){
+				unsigned int desclen = start_ix < MEM2MEM_DISCARD_BUF_LENGTH ? start_ix : MEM2MEM_DISCARD_BUF_LENGTH;
+				(*current_in_cdesc)->next = alloc_cdesc(alloc_flag);
+				if (!(*current_in_cdesc)->next){
+					DEBUG_API(printk("append_input_descriptors: alloc_cdesc mem2mem discard failed\n"));
+					return -ENOMEM;
+				}
+				(*current_in_cdesc) = (*current_in_cdesc)->next;
+				(*current_in_cdesc)->dma_descr->buf = (char*)virt_to_phys(mem2mem_discard_buf);
+				(*current_in_cdesc)->dma_descr->after = (*current_in_cdesc)->dma_descr->buf + desclen;
+				(*current_in_cdesc)->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi);
+				start_ix -= desclen;
+			}
+			mi.sync = 1;
+			(*current_in_cdesc)->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_in, mi);
+		}
+
+		failed = create_input_descriptors(operation, tc, &idescs, alloc_flag);
+		if (failed){
+			DEBUG_API(printk("append_input_descriptors: output descriptor setup failed\n"));
+			return failed;
+		}
+		DEBUG(printk("append_input_descriptors: append output descriptors to DMA in list.\n"));
+		while (idescs) {
+			DEBUG(printk("append descriptor 0x%p\n", idescs));
+			(*current_in_cdesc)->next = idescs;
+			idescs = idescs->next;
+			(*current_in_cdesc) = (*current_in_cdesc)->next;
+		}
+	}
+	return 0;
+}
+
+
+
+static int cryptocop_setup_dma_list(struct cryptocop_operation *operation, struct cryptocop_int_operation **int_op, int alloc_flag)
+{
+	struct cryptocop_session *sess;
+	struct cryptocop_transform_ctx *tctx;
+
+	struct cryptocop_tfrm_ctx digest_ctx = {
+		.previous_src = src_none,
+		.current_src = src_none,
+		.start_ix = 0,
+		.requires_padding = 1,
+		.strict_block_length = 0,
+		.hash_conf = 0,
+		.hash_mode = 0,
+		.ciph_conf = 0,
+		.cbcmode = 0,
+		.decrypt = 0,
+		.consumed = 0,
+		.produced = 0,
+		.pad_descs = NULL,
+		.active = 0,
+		.done = 0,
+		.prev_src = NULL,
+		.curr_src = NULL,
+		.tcfg = NULL};
+	struct cryptocop_tfrm_ctx cipher_ctx = {
+		.previous_src = src_none,
+		.current_src = src_none,
+		.start_ix = 0,
+		.requires_padding = 0,
+		.strict_block_length = 1,
+		.hash_conf = 0,
+		.hash_mode = 0,
+		.ciph_conf = 0,
+		.cbcmode = 0,
+		.decrypt = 0,
+		.consumed = 0,
+		.produced = 0,
+		.pad_descs = NULL,
+		.active = 0,
+		.done = 0,
+		.prev_src = NULL,
+		.curr_src = NULL,
+		.tcfg = NULL};
+	struct cryptocop_tfrm_ctx csum_ctx = {
+		.previous_src = src_none,
+		.current_src = src_none,
+		.start_ix = 0,
+		.blocklength = 2,
+		.requires_padding = 1,
+		.strict_block_length = 0,
+		.hash_conf = 0,
+		.hash_mode = 0,
+		.ciph_conf = 0,
+		.cbcmode = 0,
+		.decrypt = 0,
+		.consumed = 0,
+		.produced = 0,
+		.pad_descs = NULL,
+		.active = 0,
+		.done = 0,
+		.tcfg = NULL,
+		.prev_src = NULL,
+		.curr_src = NULL,
+		.unit_no = src_csum};
+	struct cryptocop_tfrm_cfg *tcfg = operation->tfrm_op.tfrm_cfg;
+
+	unsigned int indata_ix = 0;
+
+	/* iovec accounting. */
+	int iniov_ix = 0;
+	int iniov_offset = 0;
+
+	/* Operation descriptor cfg traversal pointer. */
+	struct cryptocop_desc *odsc;
+
+	int failed = 0;
+	/* List heads for allocated descriptors. */
+	struct cryptocop_dma_desc out_cdesc_head = {0};
+	struct cryptocop_dma_desc in_cdesc_head = {0};
+
+	struct cryptocop_dma_desc *current_out_cdesc = &out_cdesc_head;
+	struct cryptocop_dma_desc *current_in_cdesc = &in_cdesc_head;
+
+	struct cryptocop_tfrm_ctx *output_tc = NULL;
+	void                      *iop_alloc_ptr;
+
+	assert(operation != NULL);
+	assert(int_op != NULL);
+
+	DEBUG(printk("cryptocop_setup_dma_list: start\n"));
+	DEBUG(print_cryptocop_operation(operation));
+
+	sess = get_session(operation->sid);
+	if (!sess) {
+		DEBUG_API(printk("cryptocop_setup_dma_list: no session found for operation.\n"));
+		failed = -EINVAL;
+		goto error_cleanup;
+	}
+	iop_alloc_ptr = kmalloc(DESCR_ALLOC_PAD + sizeof(struct cryptocop_int_operation), alloc_flag);
+	if (!iop_alloc_ptr) {
+		DEBUG_API(printk("cryptocop_setup_dma_list:  kmalloc cryptocop_int_operation\n"));
+		failed = -ENOMEM;
+		goto error_cleanup;
+	}
+	(*int_op) = (struct cryptocop_int_operation*)(((unsigned long int)(iop_alloc_ptr + DESCR_ALLOC_PAD + offsetof(struct cryptocop_int_operation, ctx_out)) & ~0x0000001F) - offsetof(struct cryptocop_int_operation, ctx_out));
+	DEBUG(memset((*int_op), 0xff, sizeof(struct cryptocop_int_operation)));
+	(*int_op)->alloc_ptr = iop_alloc_ptr;
+	DEBUG(printk("cryptocop_setup_dma_list: *int_op=0x%p, alloc_ptr=0x%p\n", *int_op, (*int_op)->alloc_ptr));
+
+	(*int_op)->sid = operation->sid;
+	(*int_op)->cdesc_out = NULL;
+	(*int_op)->cdesc_in = NULL;
+	(*int_op)->tdes_mode = cryptocop_3des_ede;
+	(*int_op)->csum_mode = cryptocop_csum_le;
+	(*int_op)->ddesc_out = NULL;
+	(*int_op)->ddesc_in = NULL;
+
+	/* Scan operation->tfrm_op.tfrm_cfg for bad configuration and set up the local contexts. */
+	if (!tcfg) {
+		DEBUG_API(printk("cryptocop_setup_dma_list: no configured transforms in operation.\n"));
+		failed = -EINVAL;
+		goto error_cleanup;
+	}
+	while (tcfg) {
+		tctx = get_transform_ctx(sess, tcfg->tid);
+		if (!tctx) {
+			DEBUG_API(printk("cryptocop_setup_dma_list: no transform id %d in session.\n", tcfg->tid));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+		if (tcfg->inject_ix > operation->tfrm_op.outlen){
+			DEBUG_API(printk("cryptocop_setup_dma_list: transform id %d inject_ix (%d) > operation->tfrm_op.outlen(%d)", tcfg->tid, tcfg->inject_ix, operation->tfrm_op.outlen));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+		switch (tctx->init.alg){
+		case cryptocop_alg_mem2mem:
+			if (cipher_ctx.tcfg != NULL){
+				DEBUG_API(printk("cryptocop_setup_dma_list: multiple ciphers in operation.\n"));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			/* mem2mem is handled as a NULL cipher. */
+			cipher_ctx.cbcmode = 0;
+			cipher_ctx.decrypt = 0;
+			cipher_ctx.blocklength = 1;
+			cipher_ctx.ciph_conf = 0;
+			cipher_ctx.unit_no = src_dma;
+			cipher_ctx.tcfg = tcfg;
+			cipher_ctx.tctx = tctx;
+			break;
+		case cryptocop_alg_des:
+		case cryptocop_alg_3des:
+		case cryptocop_alg_aes:
+			/* cipher */
+			if (cipher_ctx.tcfg != NULL){
+				DEBUG_API(printk("cryptocop_setup_dma_list: multiple ciphers in operation.\n"));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			cipher_ctx.tcfg = tcfg;
+			cipher_ctx.tctx = tctx;
+			if (cipher_ctx.tcfg->flags & CRYPTOCOP_DECRYPT){
+				cipher_ctx.decrypt = 1;
+			}
+			switch (tctx->init.cipher_mode) {
+			case cryptocop_cipher_mode_ecb:
+				cipher_ctx.cbcmode = 0;
+				break;
+			case cryptocop_cipher_mode_cbc:
+				cipher_ctx.cbcmode = 1;
+				break;
+			default:
+				DEBUG_API(printk("cryptocop_setup_dma_list: cipher_ctx, bad cipher mode==%d\n", tctx->init.cipher_mode));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			DEBUG(printk("cryptocop_setup_dma_list: cipher_ctx, set CBC mode==%d\n", cipher_ctx.cbcmode));
+			switch (tctx->init.alg){
+			case cryptocop_alg_des:
+				cipher_ctx.ciph_conf = 0;
+				cipher_ctx.unit_no = src_des;
+				cipher_ctx.blocklength = DES_BLOCK_LENGTH;
+				break;
+			case cryptocop_alg_3des:
+				cipher_ctx.ciph_conf = 1;
+				cipher_ctx.unit_no = src_des;
+				cipher_ctx.blocklength = DES_BLOCK_LENGTH;
+				break;
+			case cryptocop_alg_aes:
+				cipher_ctx.ciph_conf = 2;
+				cipher_ctx.unit_no = src_aes;
+				cipher_ctx.blocklength = AES_BLOCK_LENGTH;
+				break;
+			default:
+				panic("cryptocop_setup_dma_list: impossible algorithm %d\n", tctx->init.alg);
+			}
+			(*int_op)->tdes_mode = tctx->init.tdes_mode;
+			break;
+		case cryptocop_alg_md5:
+		case cryptocop_alg_sha1:
+			/* digest */
+			if (digest_ctx.tcfg != NULL){
+				DEBUG_API(printk("cryptocop_setup_dma_list: multiple digests in operation.\n"));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			digest_ctx.tcfg = tcfg;
+			digest_ctx.tctx = tctx;
+			digest_ctx.hash_mode = 0; /* Don't use explicit IV in this API. */
+			switch (tctx->init.alg){
+			case cryptocop_alg_md5:
+				digest_ctx.blocklength = MD5_BLOCK_LENGTH;
+				digest_ctx.unit_no = src_md5;
+				digest_ctx.hash_conf = 1; /* 1 => MD-5 */
+				break;
+			case cryptocop_alg_sha1:
+				digest_ctx.blocklength = SHA1_BLOCK_LENGTH;
+				digest_ctx.unit_no = src_sha1;
+				digest_ctx.hash_conf = 0; /* 0 => SHA-1 */
+				break;
+			default:
+				panic("cryptocop_setup_dma_list: impossible digest algorithm\n");
+			}
+			break;
+		case cryptocop_alg_csum:
+			/* digest */
+			if (csum_ctx.tcfg != NULL){
+				DEBUG_API(printk("cryptocop_setup_dma_list: multiple checksums in operation.\n"));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			(*int_op)->csum_mode = tctx->init.csum_mode;
+			csum_ctx.tcfg = tcfg;
+			csum_ctx.tctx = tctx;
+			break;
+		default:
+			/* no algorithm. */
+			DEBUG_API(printk("cryptocop_setup_dma_list: invalid algorithm %d specified in tfrm %d.\n", tctx->init.alg, tcfg->tid));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+		tcfg = tcfg->next;
+	}
+	/* Download key if a cipher is used. */
+	if (cipher_ctx.tcfg && (cipher_ctx.tctx->init.alg != cryptocop_alg_mem2mem)){
+		struct cryptocop_dma_desc  *key_desc = NULL;
+
+		failed = setup_key_dl_desc(&cipher_ctx, &key_desc, alloc_flag);
+		if (failed) {
+			DEBUG_API(printk("cryptocop_setup_dma_list: setup key dl\n"));
+			goto error_cleanup;
+		}
+		current_out_cdesc->next = key_desc;
+		current_out_cdesc = key_desc;
+		indata_ix += (unsigned int)(key_desc->dma_descr->after - key_desc->dma_descr->buf);
+
+		/* Download explicit IV if a cipher is used and CBC mode and explicit IV selected. */
+		if ((cipher_ctx.tctx->init.cipher_mode == cryptocop_cipher_mode_cbc) && (cipher_ctx.tcfg->flags & CRYPTOCOP_EXPLICIT_IV)) {
+			struct cryptocop_dma_desc  *iv_desc = NULL;
+
+			DEBUG(printk("cryptocop_setup_dma_list: setup cipher CBC IV descriptor.\n"));
+
+			failed = setup_cipher_iv_desc(&cipher_ctx, &iv_desc, alloc_flag);
+			if (failed) {
+				DEBUG_API(printk("cryptocop_setup_dma_list: CBC IV descriptor.\n"));
+				goto error_cleanup;
+			}
+			current_out_cdesc->next = iv_desc;
+			current_out_cdesc = iv_desc;
+			indata_ix += (unsigned int)(iv_desc->dma_descr->after - iv_desc->dma_descr->buf);
+		}
+	}
+
+	/* Process descriptors. */
+	odsc = operation->tfrm_op.desc;
+	while (odsc) {
+		struct cryptocop_desc_cfg   *dcfg = odsc->cfg;
+		struct strcop_meta_out      meta_out = {0};
+		size_t                      desc_len = odsc->length;
+		int                         active_count, eop_needed_count;
+
+		output_tc = NULL;
+
+		DEBUG(printk("cryptocop_setup_dma_list: parsing an operation descriptor\n"));
+
+		while (dcfg) {
+			struct cryptocop_tfrm_ctx  *tc = NULL;
+
+			DEBUG(printk("cryptocop_setup_dma_list: parsing an operation descriptor configuration.\n"));
+			/* Get the local context for the transform and mark it as the output unit if it produces output. */
+			if (digest_ctx.tcfg && (digest_ctx.tcfg->tid == dcfg->tid)){
+				tc = &digest_ctx;
+			} else if (cipher_ctx.tcfg && (cipher_ctx.tcfg->tid == dcfg->tid)){
+				tc = &cipher_ctx;
+			} else if (csum_ctx.tcfg && (csum_ctx.tcfg->tid == dcfg->tid)){
+				tc = &csum_ctx;
+			}
+			if (!tc) {
+				DEBUG_API(printk("cryptocop_setup_dma_list: invalid transform %d specified in descriptor.\n", dcfg->tid));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			if (tc->done) {
+				DEBUG_API(printk("cryptocop_setup_dma_list: completed transform %d reused.\n", dcfg->tid));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			if (!tc->active) {
+				tc->start_ix = indata_ix;
+				tc->active = 1;
+			}
+
+			tc->previous_src = tc->current_src;
+			tc->prev_src = tc->curr_src;
+			/* Map source unit id to DMA source config. */
+			switch (dcfg->src){
+			case cryptocop_source_dma:
+				tc->current_src = src_dma;
+				break;
+			case cryptocop_source_des:
+				tc->current_src = src_des;
+				break;
+			case cryptocop_source_3des:
+				tc->current_src = src_des;
+				break;
+			case cryptocop_source_aes:
+				tc->current_src = src_aes;
+				break;
+			case cryptocop_source_md5:
+			case cryptocop_source_sha1:
+			case cryptocop_source_csum:
+			case cryptocop_source_none:
+			default:
+				/* We do not allow using accumulating style units (SHA-1, MD5, checksum) as sources to other units.
+				 */
+				DEBUG_API(printk("cryptocop_setup_dma_list: bad unit source configured %d.\n", dcfg->src));
+				failed = -EINVAL;
+				goto error_cleanup;
+			}
+			if (tc->current_src != src_dma) {
+				/* Find the unit we are sourcing from. */
+				if (digest_ctx.unit_no == tc->current_src){
+					tc->curr_src = &digest_ctx;
+				} else if (cipher_ctx.unit_no == tc->current_src){
+					tc->curr_src = &cipher_ctx;
+				} else if (csum_ctx.unit_no == tc->current_src){
+					tc->curr_src = &csum_ctx;
+				}
+				if ((tc->curr_src == tc) && (tc->unit_no != src_dma)){
+					DEBUG_API(printk("cryptocop_setup_dma_list: unit %d configured to source from itself.\n", tc->unit_no));
+					failed = -EINVAL;
+					goto error_cleanup;
+				}
+			} else {
+				tc->curr_src = NULL;
+			}
+
+			/* Detect source switch. */
+			DEBUG(printk("cryptocop_setup_dma_list: tc->active=%d tc->unit_no=%d tc->current_src=%d tc->previous_src=%d, tc->curr_src=0x%p, tc->prev_srv=0x%p\n", tc->active, tc->unit_no, tc->current_src, tc->previous_src, tc->curr_src, tc->prev_src));
+			if (tc->active && (tc->current_src != tc->previous_src)) {
+				/* Only allow source switch when both the old source unit and the new one have
+				 * no pending data to process (i.e. the consumed length must be a multiple of the
+				 * transform blocklength). */
+				/* Note: if the src == NULL we are actually sourcing from DMA out. */
+				if (((tc->prev_src != NULL) && (tc->prev_src->consumed % tc->prev_src->blocklength)) ||
+				    ((tc->curr_src != NULL) && (tc->curr_src->consumed % tc->curr_src->blocklength)))
+				{
+					DEBUG_API(printk("cryptocop_setup_dma_list: can only disconnect from or connect to a unit on a multiple of the blocklength, old: cons=%d, prod=%d, block=%d, new: cons=%d prod=%d, block=%d.\n", tc->prev_src ? tc->prev_src->consumed : INT_MIN, tc->prev_src ? tc->prev_src->produced : INT_MIN, tc->prev_src ? tc->prev_src->blocklength : INT_MIN, tc->curr_src ? tc->curr_src->consumed : INT_MIN, tc->curr_src ? tc->curr_src->produced : INT_MIN, tc->curr_src ? tc->curr_src->blocklength : INT_MIN));
+					failed = -EINVAL;
+					goto error_cleanup;
+				}
+			}
+			/* Detect unit deactivation. */
+			if (dcfg->last) {
+				/* Length check of this is handled below. */
+				tc->done = 1;
+			}
+			dcfg = dcfg->next;
+		} /* while (dcfg) */
+		DEBUG(printk("cryptocop_setup_dma_list: parsing operation descriptor configuration complete.\n"));
+
+		if (cipher_ctx.active && (cipher_ctx.curr_src != NULL) && !cipher_ctx.curr_src->active){
+			DEBUG_API(printk("cryptocop_setup_dma_list: cipher source from inactive unit %d\n", cipher_ctx.curr_src->unit_no));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+		if (digest_ctx.active && (digest_ctx.curr_src != NULL) && !digest_ctx.curr_src->active){
+			DEBUG_API(printk("cryptocop_setup_dma_list: digest source from inactive unit %d\n", digest_ctx.curr_src->unit_no));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+		if (csum_ctx.active && (csum_ctx.curr_src != NULL) && !csum_ctx.curr_src->active){
+			DEBUG_API(printk("cryptocop_setup_dma_list: cipher source from inactive unit %d\n", csum_ctx.curr_src->unit_no));
+			failed = -EINVAL;
+			goto error_cleanup;
+		}
+
+		/* Update consumed and produced lengths.
+
+		   The consumed length accounting here is actually cheating.  If a unit source from DMA (or any
+		   other unit that process data in blocks of one octet) it is correct, but if it source from a
+		   block processing unit, i.e. a cipher, it will be temporarily incorrect at some times.  However
+		   since it is only allowed--by the HW--to change source to or from a block processing unit at times where that
+		   unit has processed an exact multiple of its block length the end result will be correct.
+		   Beware that if the source change restriction change this code will need to be (much) reworked.
+		*/
+		DEBUG(printk("cryptocop_setup_dma_list: desc->length=%d, desc_len=%d.\n", odsc->length, desc_len));
+
+		if (csum_ctx.active) {
+			csum_ctx.consumed += desc_len;
+			if (csum_ctx.done) {
+				csum_ctx.produced = 2;
+			}
+			DEBUG(printk("cryptocop_setup_dma_list: csum_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", csum_ctx.consumed, csum_ctx.produced, csum_ctx.blocklength));
+		}
+		if (digest_ctx.active) {
+			digest_ctx.consumed += desc_len;
+			if (digest_ctx.done) {
+				if (digest_ctx.unit_no == src_md5) {
+					digest_ctx.produced = MD5_STATE_LENGTH;
+				} else {
+					digest_ctx.produced = SHA1_STATE_LENGTH;
+				}
+			}
+			DEBUG(printk("cryptocop_setup_dma_list: digest_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", digest_ctx.consumed, digest_ctx.produced, digest_ctx.blocklength));
+		}
+		if (cipher_ctx.active) {
+			/* Ciphers are allowed only to source from DMA out.  That is filtered above. */
+			assert(cipher_ctx.current_src == src_dma);
+			cipher_ctx.consumed += desc_len;
+			cipher_ctx.produced = cipher_ctx.blocklength * (cipher_ctx.consumed / cipher_ctx.blocklength);
+			if (cipher_ctx.cbcmode && !(cipher_ctx.tcfg->flags & CRYPTOCOP_EXPLICIT_IV) && cipher_ctx.produced){
+				cipher_ctx.produced -= cipher_ctx.blocklength; /* Compensate for CBC iv. */
+			}
+			DEBUG(printk("cryptocop_setup_dma_list: cipher_ctx producing: consumed=%d, produced=%d, blocklength=%d.\n", cipher_ctx.consumed, cipher_ctx.produced, cipher_ctx.blocklength));
+		}
+
+		/* Setup the DMA out descriptors. */
+		/* Configure the metadata. */
+		active_count = 0;
+		eop_needed_count = 0;
+		if (cipher_ctx.active) {
+			++active_count;
+			if (cipher_ctx.unit_no == src_dma){
+				/* mem2mem */
+				meta_out.ciphsel = src_none;
+			} else {
+				meta_out.ciphsel = cipher_ctx.current_src;
+			}
+			meta_out.ciphconf = cipher_ctx.ciph_conf;
+			meta_out.cbcmode = cipher_ctx.cbcmode;
+			meta_out.decrypt = cipher_ctx.decrypt;
+			DEBUG(printk("set ciphsel=%d ciphconf=%d cbcmode=%d decrypt=%d\n", meta_out.ciphsel, meta_out.ciphconf, meta_out.cbcmode, meta_out.decrypt));
+			if (cipher_ctx.done) ++eop_needed_count;
+		} else {
+			meta_out.ciphsel = src_none;
+		}
+
+		if (digest_ctx.active) {
+			++active_count;
+			meta_out.hashsel = digest_ctx.current_src;
+			meta_out.hashconf = digest_ctx.hash_conf;
+			meta_out.hashmode = 0; /* Explicit mode is not used here. */
+			DEBUG(printk("set hashsel=%d hashconf=%d hashmode=%d\n", meta_out.hashsel, meta_out.hashconf, meta_out.hashmode));
+			if (digest_ctx.done) {
+				assert(digest_ctx.pad_descs == NULL);
+				failed = create_pad_descriptor(&digest_ctx, &digest_ctx.pad_descs, alloc_flag);
+				if (failed) {
+					DEBUG_API(printk("cryptocop_setup_dma_list: failed digest pad creation.\n"));
+					goto error_cleanup;
+				}
+			}
+		} else {
+			meta_out.hashsel = src_none;
+		}
+
+		if (csum_ctx.active) {
+			++active_count;
+			meta_out.csumsel = csum_ctx.current_src;
+			if (csum_ctx.done) {
+				assert(csum_ctx.pad_descs == NULL);
+				failed = create_pad_descriptor(&csum_ctx, &csum_ctx.pad_descs, alloc_flag);
+				if (failed) {
+					DEBUG_API(printk("cryptocop_setup_dma_list: failed csum pad creation.\n"));
+					goto error_cleanup;
+				}
+			}
+		} else {
+			meta_out.csumsel = src_none;
+		}
+		DEBUG(printk("cryptocop_setup_dma_list: %d eop needed, %d active units\n", eop_needed_count, active_count));
+		/* Setup DMA out descriptors for the indata. */
+		failed = create_output_descriptors(operation, &iniov_ix, &iniov_offset, desc_len, &current_out_cdesc, &meta_out, alloc_flag);
+		if (failed) {
+			DEBUG_API(printk("cryptocop_setup_dma_list: create_output_descriptors %d\n", failed));
+			goto error_cleanup;
+		}
+		/* Setup out EOP.  If there are active units that are not done here they cannot get an EOP
+		 * so we ust setup a zero length descriptor to DMA to signal EOP only to done units.
+		 * If there is a pad descriptor EOP for the padded unit will be EOPed by it.
+		 */
+		assert(active_count >= eop_needed_count);
+		assert((eop_needed_count == 0) || (eop_needed_count == 1));
+		if (eop_needed_count) {
+			/* This means that the bulk operation (cipeher/m2m) is terminated. */
+			if (active_count > 1) {
+				/* Use zero length EOP descriptor. */
+				struct cryptocop_dma_desc *ed = alloc_cdesc(alloc_flag);
+				struct strcop_meta_out    ed_mo = {0};
+				if (!ed) {
+					DEBUG_API(printk("cryptocop_setup_dma_list: alloc EOP descriptor for cipher\n"));
+					failed = -ENOMEM;
+					goto error_cleanup;
+				}
+
+				assert(cipher_ctx.active && cipher_ctx.done);
+
+				if (cipher_ctx.unit_no == src_dma){
+					/* mem2mem */
+					ed_mo.ciphsel = src_none;
+				} else {
+					ed_mo.ciphsel = cipher_ctx.current_src;
+				}
+				ed_mo.ciphconf = cipher_ctx.ciph_conf;
+				ed_mo.cbcmode = cipher_ctx.cbcmode;
+				ed_mo.decrypt = cipher_ctx.decrypt;
+
+				ed->free_buf = NULL;
+				ed->dma_descr->wait = 1;
+				ed->dma_descr->out_eop = 1;
+
+				ed->dma_descr->buf = (char*)virt_to_phys(&ed); /* Use any valid physical address for zero length descriptor. */
+				ed->dma_descr->after = ed->dma_descr->buf;
+				ed->dma_descr->md = REG_TYPE_CONV(unsigned short int, struct strcop_meta_out, ed_mo);
+				current_out_cdesc->next = ed;
+				current_out_cdesc = ed;
+			} else {
+				/* Set EOP in the current out descriptor since the only active module is
+				 * the one needing the EOP. */
+
+				current_out_cdesc->dma_descr->out_eop = 1;
+			}
+		}
+
+		if (cipher_ctx.done && cipher_ctx.active) cipher_ctx.active = 0;
+		if (digest_ctx.done && digest_ctx.active) digest_ctx.active = 0;
+		if (csum_ctx.done && csum_ctx.active) csum_ctx.active = 0;
+		indata_ix += odsc->length;
+		odsc = odsc->next;
+	} /* while (odsc) */ /* Process descriptors. */
+	DEBUG(printk("cryptocop_setup_dma_list: done parsing operation descriptors\n"));
+	if (cipher_ctx.tcfg && (cipher_ctx.active || !cipher_ctx.done)){
+		DEBUG_API(printk("cryptocop_setup_dma_list: cipher operation not terminated.\n"));
+		failed = -EINVAL;
+		goto error_cleanup;
+	}
+	if (digest_ctx.tcfg && (digest_ctx.active || !digest_ctx.done)){
+		DEBUG_API(printk("cryptocop_setup_dma_list: digest operation not terminated.\n"));
+		failed = -EINVAL;
+		goto error_cleanup;
+	}
+	if (csum_ctx.tcfg && (csum_ctx.active || !csum_ctx.done)){
+		DEBUG_API(printk("cryptocop_setup_dma_list: csum operation not terminated.\n"));
+		failed = -EINVAL;
+		goto error_cleanup;
+	}
+
+	failed = append_input_descriptors(operation, &current_in_cdesc, &current_out_cdesc, &cipher_ctx, alloc_flag);
+	if (failed){
+		DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed));
+		goto error_cleanup;
+	}
+	failed = append_input_descriptors(operation, &current_in_cdesc, &current_out_cdesc, &digest_ctx, alloc_flag);
+	if (failed){
+		DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed));
+		goto error_cleanup;
+	}
+	failed = append_input_descriptors(operation, &current_in_cdesc, &current_out_cdesc, &csum_ctx, alloc_flag);
+	if (failed){
+		DEBUG_API(printk("cryptocop_setup_dma_list: append_input_descriptors cipher_ctx %d\n", failed));
+		goto error_cleanup;
+	}
+
+	DEBUG(printk("cryptocop_setup_dma_list: int_op=0x%p, *int_op=0x%p\n", int_op, *int_op));
+	(*int_op)->cdesc_out = out_cdesc_head.next;
+	(*int_op)->cdesc_in = in_cdesc_head.next;
+	DEBUG(printk("cryptocop_setup_dma_list: out_cdesc_head=0x%p in_cdesc_head=0x%p\n", (*int_op)->cdesc_out, (*int_op)->cdesc_in));
+
+	setup_descr_chain(out_cdesc_head.next);
+	setup_descr_chain(in_cdesc_head.next);
+
+	/* Last but not least: mark the last DMA in descriptor for a INTR and EOL and the the
+	 * last DMA out descriptor for EOL.
+	 */
+	current_in_cdesc->dma_descr->intr = 1;
+	current_in_cdesc->dma_descr->eol = 1;
+	current_out_cdesc->dma_descr->eol = 1;
+
+	/* Setup DMA contexts. */
+	(*int_op)->ctx_out.next = NULL;
+	(*int_op)->ctx_out.eol = 1;
+	(*int_op)->ctx_out.intr = 0;
+	(*int_op)->ctx_out.store_mode = 0;
+	(*int_op)->ctx_out.en = 0;
+	(*int_op)->ctx_out.dis = 0;
+	(*int_op)->ctx_out.md0 = 0;
+	(*int_op)->ctx_out.md1 = 0;
+	(*int_op)->ctx_out.md2 = 0;
+	(*int_op)->ctx_out.md3 = 0;
+	(*int_op)->ctx_out.md4 = 0;
+	(*int_op)->ctx_out.saved_data = (dma_descr_data*)virt_to_phys((*int_op)->cdesc_out->dma_descr);
+	(*int_op)->ctx_out.saved_data_buf = (*int_op)->cdesc_out->dma_descr->buf; /* Already physical address. */
+
+	(*int_op)->ctx_in.next = NULL;
+	(*int_op)->ctx_in.eol = 1;
+	(*int_op)->ctx_in.intr = 0;
+	(*int_op)->ctx_in.store_mode = 0;
+	(*int_op)->ctx_in.en = 0;
+	(*int_op)->ctx_in.dis = 0;
+	(*int_op)->ctx_in.md0 = 0;
+	(*int_op)->ctx_in.md1 = 0;
+	(*int_op)->ctx_in.md2 = 0;
+	(*int_op)->ctx_in.md3 = 0;
+	(*int_op)->ctx_in.md4 = 0;
+
+	(*int_op)->ctx_in.saved_data = (dma_descr_data*)virt_to_phys((*int_op)->cdesc_in->dma_descr);
+	(*int_op)->ctx_in.saved_data_buf = (*int_op)->cdesc_in->dma_descr->buf; /* Already physical address. */
+
+	DEBUG(printk("cryptocop_setup_dma_list: done\n"));
+	return 0;
+
+error_cleanup:
+	{
+		/* Free all allocated resources. */
+		struct cryptocop_dma_desc *tmp_cdesc;
+		while (digest_ctx.pad_descs){
+			tmp_cdesc = digest_ctx.pad_descs->next;
+			free_cdesc(digest_ctx.pad_descs);
+			digest_ctx.pad_descs = tmp_cdesc;
+		}
+		while (csum_ctx.pad_descs){
+			tmp_cdesc = csum_ctx.pad_descs->next;
+			free_cdesc(csum_ctx.pad_descs);
+			csum_ctx.pad_descs = tmp_cdesc;
+		}
+		assert(cipher_ctx.pad_descs == NULL); /* The ciphers are never padded. */
+
+		if (*int_op != NULL) delete_internal_operation(*int_op);
+	}
+	DEBUG_API(printk("cryptocop_setup_dma_list: done with error %d\n", failed));
+	return failed;
+}
+
+
+static void delete_internal_operation(struct cryptocop_int_operation *iop)
+{
+	void                      *ptr = iop->alloc_ptr;
+	struct cryptocop_dma_desc *cd = iop->cdesc_out;
+	struct cryptocop_dma_desc *next;
+
+	DEBUG(printk("delete_internal_operation: iop=0x%p, alloc_ptr=0x%p\n", iop, ptr));
+
+	while (cd) {
+		next = cd->next;
+		free_cdesc(cd);
+		cd = next;
+	}
+	cd = iop->cdesc_in;
+	while (cd) {
+		next = cd->next;
+		free_cdesc(cd);
+		cd = next;
+	}
+	kfree(ptr);
+}
+
+#define MD5_MIN_PAD_LENGTH (9)
+#define MD5_PAD_LENGTH_FIELD_LENGTH (8)
+
+static int create_md5_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length)
+{
+	size_t                  padlen = MD5_BLOCK_LENGTH - (hashed_length % MD5_BLOCK_LENGTH);
+	unsigned char           *p;
+	int                     i;
+	unsigned long long int  bit_length = hashed_length << 3;
+
+	if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH;
+
+	p = kmalloc(padlen, alloc_flag);
+	if (!pad) return -ENOMEM;
+
+	*p = 0x80;
+	memset(p+1, 0, padlen - 1);
+
+	DEBUG(printk("create_md5_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
+
+	i = padlen - MD5_PAD_LENGTH_FIELD_LENGTH;
+	while (bit_length != 0){
+		p[i++] = bit_length % 0x100;
+		bit_length >>= 8;
+	}
+
+	*pad = (char*)p;
+	*pad_length = padlen;
+
+	return 0;
+}
+
+#define SHA1_MIN_PAD_LENGTH (9)
+#define SHA1_PAD_LENGTH_FIELD_LENGTH (8)
+
+static int create_sha1_pad(int alloc_flag, unsigned long long hashed_length, char **pad, size_t *pad_length)
+{
+	size_t                  padlen = SHA1_BLOCK_LENGTH - (hashed_length % SHA1_BLOCK_LENGTH);
+	unsigned char           *p;
+	int                     i;
+	unsigned long long int  bit_length = hashed_length << 3;
+
+	if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH;
+
+	p = kmalloc(padlen, alloc_flag);
+	if (!pad) return -ENOMEM;
+
+	*p = 0x80;
+	memset(p+1, 0, padlen - 1);
+
+	DEBUG(printk("create_sha1_pad: hashed_length=%lld bits == %lld bytes\n", bit_length, hashed_length));
+
+	i = padlen - 1;
+	while (bit_length != 0){
+		p[i--] = bit_length % 0x100;
+		bit_length >>= 8;
+	}
+
+	*pad = (char*)p;
+	*pad_length = padlen;
+
+	return 0;
+}
+
+
+static int transform_ok(struct cryptocop_transform_init *tinit)
+{
+	switch (tinit->alg){
+	case cryptocop_alg_csum:
+		switch (tinit->csum_mode){
+		case cryptocop_csum_le:
+		case cryptocop_csum_be:
+			break;
+		default:
+			DEBUG_API(printk("transform_ok: Bad mode set for csum transform\n"));
+			return -EINVAL;
+		}
+	case cryptocop_alg_mem2mem:
+	case cryptocop_alg_md5:
+	case cryptocop_alg_sha1:
+		if (tinit->keylen != 0) {
+			DEBUG_API(printk("transform_ok: non-zero keylength, %d, for a digest/csum algorithm\n", tinit->keylen));
+			return -EINVAL; /* This check is a bit strict. */
+		}
+		break;
+	case cryptocop_alg_des:
+		if (tinit->keylen != 64) {
+			DEBUG_API(printk("transform_ok: keylen %d invalid for DES\n", tinit->keylen));
+			return -EINVAL;
+		}
+		break;
+	case cryptocop_alg_3des:
+		if (tinit->keylen != 192) {
+			DEBUG_API(printk("transform_ok: keylen %d invalid for 3DES\n", tinit->keylen));
+			return -EINVAL;
+		}
+		break;
+	case cryptocop_alg_aes:
+		if (tinit->keylen != 128 && tinit->keylen != 192 && tinit->keylen != 256) {
+			DEBUG_API(printk("transform_ok: keylen %d invalid for AES\n", tinit->keylen));
+			return -EINVAL;
+		}
+		break;
+	case cryptocop_no_alg:
+	default:
+		DEBUG_API(printk("transform_ok: no such algorithm %d\n", tinit->alg));
+		return -EINVAL;
+	}
+
+	switch (tinit->alg){
+	case cryptocop_alg_des:
+	case cryptocop_alg_3des:
+	case cryptocop_alg_aes:
+		if (tinit->cipher_mode != cryptocop_cipher_mode_ecb && tinit->cipher_mode != cryptocop_cipher_mode_cbc) return -EINVAL;
+	default:
+		 break;
+	}
+	return 0;
+}
+
+
+int cryptocop_new_session(cryptocop_session_id *sid, struct cryptocop_transform_init *tinit, int alloc_flag)
+{
+	struct cryptocop_session         *sess;
+	struct cryptocop_transform_init  *tfrm_in = tinit;
+	struct cryptocop_transform_init  *tmp_in;
+	int                              no_tfrms = 0;
+	int                              i;
+	unsigned long int                flags;
+
+	init_stream_coprocessor(); /* For safety if we are called early */
+
+	while (tfrm_in){
+		int err;
+		++no_tfrms;
+		if ((err = transform_ok(tfrm_in))) {
+			DEBUG_API(printk("cryptocop_new_session, bad transform\n"));
+			return err;
+		}
+		tfrm_in = tfrm_in->next;
+	}
+	if (0 == no_tfrms) {
+		DEBUG_API(printk("cryptocop_new_session, no transforms specified\n"));
+		return -EINVAL;
+	}
+
+	sess = kmalloc(sizeof(struct cryptocop_session), alloc_flag);
+	if (!sess){
+		DEBUG_API(printk("cryptocop_new_session, kmalloc cryptocop_session\n"));
+		return -ENOMEM;
+	}
+
+	sess->tfrm_ctx = kmalloc(no_tfrms * sizeof(struct cryptocop_transform_ctx), alloc_flag);
+	if (!sess->tfrm_ctx) {
+		DEBUG_API(printk("cryptocop_new_session, kmalloc cryptocop_transform_ctx\n"));
+		kfree(sess);
+		return -ENOMEM;
+	}
+
+	tfrm_in = tinit;
+	for (i = 0; i < no_tfrms; i++){
+		tmp_in = tfrm_in->next;
+		while (tmp_in){
+			if (tmp_in->tid == tfrm_in->tid) {
+				DEBUG_API(printk("cryptocop_new_session, duplicate transform ids\n"));
+				kfree(sess->tfrm_ctx);
+				kfree(sess);
+				return -EINVAL;
+			}
+			tmp_in = tmp_in->next;
+		}
+		memcpy(&sess->tfrm_ctx[i].init, tfrm_in, sizeof(struct cryptocop_transform_init));
+		sess->tfrm_ctx[i].dec_key_set = 0;
+		sess->tfrm_ctx[i].next = &sess->tfrm_ctx[i] + 1;
+
+		tfrm_in = tfrm_in->next;
+	}
+	sess->tfrm_ctx[i-1].next = NULL;
+
+	spin_lock_irqsave(&cryptocop_sessions_lock, flags);
+	sess->sid = next_sid;
+	next_sid++;
+	/* TODO If we are really paranoid we should do duplicate check to handle sid wraparound.
+	 *      OTOH 2^64 is a really large number of session. */
+	if (next_sid == 0) next_sid = 1;
+
+	/* Prepend to session list. */
+	sess->next = cryptocop_sessions;
+	cryptocop_sessions = sess;
+	spin_unlock_irqrestore(&cryptocop_sessions_lock, flags);
+	*sid = sess->sid;
+	return 0;
+}
+
+
+int cryptocop_free_session(cryptocop_session_id sid)
+{
+	struct cryptocop_transform_ctx    *tc;
+	struct cryptocop_session          *sess = NULL;
+	struct cryptocop_session          *psess = NULL;
+	unsigned long int                 flags;
+	int                               i;
+	LIST_HEAD(remove_list);
+	struct list_head                  *node, *tmp;
+	struct cryptocop_prio_job         *pj;
+
+	DEBUG(printk("cryptocop_free_session: sid=%lld\n", sid));
+
+	spin_lock_irqsave(&cryptocop_sessions_lock, flags);
+	sess = cryptocop_sessions;
+	while (sess && sess->sid != sid){
+		psess = sess;
+		sess = sess->next;
+	}
+	if (sess){
+		if (psess){
+			psess->next = sess->next;
+		} else {
+			cryptocop_sessions = sess->next;
+		}
+	}
+	spin_unlock_irqrestore(&cryptocop_sessions_lock, flags);
+
+	if (!sess) return -EINVAL;
+
+	/* Remove queued jobs. */
+	spin_lock_irqsave(&cryptocop_job_queue_lock, flags);
+
+	for (i = 0; i < cryptocop_prio_no_prios; i++){
+		if (!list_empty(&(cryptocop_job_queues[i].jobs))){
+			list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) {
+				pj = list_entry(node, struct cryptocop_prio_job, node);
+				if (pj->oper->sid == sid) {
+					list_move_tail(node, &remove_list);
+				}
+			}
+		}
+	}
+	spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags);
+
+	list_for_each_safe(node, tmp, &remove_list) {
+		list_del(node);
+		pj = list_entry(node, struct cryptocop_prio_job, node);
+		pj->oper->operation_status = -EAGAIN;  /* EAGAIN is not ideal for job/session terminated but it's the best choice I know of. */
+		DEBUG(printk("cryptocop_free_session: pj=0x%p, pj->oper=0x%p, pj->iop=0x%p\n", pj, pj->oper, pj->iop));
+		pj->oper->cb(pj->oper, pj->oper->cb_data);
+		delete_internal_operation(pj->iop);
+		kfree(pj);
+	}
+
+	tc = sess->tfrm_ctx;
+	/* Erase keying data. */
+	while (tc){
+		DEBUG(printk("cryptocop_free_session: memset keys, tfrm id=%d\n", tc->init.tid));
+		memset(tc->init.key, 0xff, CRYPTOCOP_MAX_KEY_LENGTH);
+		memset(tc->dec_key, 0xff, CRYPTOCOP_MAX_KEY_LENGTH);
+		tc = tc->next;
+	}
+	kfree(sess->tfrm_ctx);
+	kfree(sess);
+
+	return 0;
+}
+
+static struct cryptocop_session *get_session(cryptocop_session_id sid)
+{
+	struct cryptocop_session    *sess;
+	unsigned long int           flags;
+
+	spin_lock_irqsave(&cryptocop_sessions_lock, flags);
+	sess = cryptocop_sessions;
+	while (sess && (sess->sid != sid)){
+		sess = sess->next;
+	}
+	spin_unlock_irqrestore(&cryptocop_sessions_lock, flags);
+
+	return sess;
+}
+
+static struct cryptocop_transform_ctx *get_transform_ctx(struct cryptocop_session *sess, cryptocop_tfrm_id tid)
+{
+	struct cryptocop_transform_ctx *tc = sess->tfrm_ctx;
+
+	DEBUG(printk("get_transform_ctx, sess=0x%p, tid=%d\n", sess, tid));
+	assert(sess != NULL);
+	while (tc && tc->init.tid != tid){
+		DEBUG(printk("tc=0x%p, tc->next=0x%p\n", tc, tc->next));
+		tc = tc->next;
+	}
+	DEBUG(printk("get_transform_ctx, returning tc=0x%p\n", tc));
+	return tc;
+}
+
+
+
+/* The AES s-transform matrix (s-box). */
+static const u8 aes_sbox[256] = {
+	99,  124, 119, 123, 242, 107, 111, 197, 48,  1,   103, 43,  254, 215, 171, 118,
+	202, 130, 201, 125, 250, 89,  71,  240, 173, 212, 162, 175, 156, 164, 114, 192,
+	183, 253, 147, 38,  54,  63,  247, 204, 52,  165, 229, 241, 113, 216, 49,  21,
+	4,   199, 35,  195, 24,  150, 5,   154, 7,   18,  128, 226, 235, 39,  178, 117,
+	9,   131, 44,  26,  27,  110, 90,  160, 82,  59,  214, 179, 41,  227, 47,  132,
+	83,  209, 0,   237, 32,  252, 177, 91,  106, 203, 190, 57,  74,  76,  88,  207,
+	208, 239, 170, 251, 67,  77,  51,  133, 69,  249, 2,   127, 80,  60,  159, 168,
+	81,  163, 64,  143, 146, 157, 56,  245, 188, 182, 218, 33,  16,  255, 243, 210,
+	205, 12,  19,  236, 95,  151, 68,  23,  196, 167, 126, 61,  100, 93,  25,  115,
+	96,  129, 79,  220, 34,  42,  144, 136, 70,  238, 184, 20,  222, 94,  11,  219,
+	224, 50,  58,  10,  73,  6,   36,  92,  194, 211, 172, 98,  145, 149, 228, 121,
+	231, 200, 55,  109, 141, 213, 78,  169, 108, 86,  244, 234, 101, 122, 174, 8,
+	186, 120, 37,  46,  28,  166, 180, 198, 232, 221, 116, 31,  75,  189, 139, 138,
+	112, 62,  181, 102, 72,  3,   246, 14,  97,  53,  87,  185, 134, 193, 29,  158,
+	225, 248, 152, 17,  105, 217, 142, 148, 155, 30,  135, 233, 206, 85,  40,  223,
+	140, 161, 137, 13,  191, 230, 66,  104, 65,  153, 45,  15,  176, 84,  187, 22
+};
+
+/* AES has a 32 bit word round constants for each round in the
+ * key schedule.  round_constant[i] is really Rcon[i+1] in FIPS187.
+ */
+static u32 round_constant[11] = {
+	0x01000000, 0x02000000, 0x04000000, 0x08000000,
+	0x10000000, 0x20000000, 0x40000000, 0x80000000,
+	0x1B000000, 0x36000000, 0x6C000000
+};
+
+/* Apply the s-box to each of the four occtets in w. */
+static u32 aes_ks_subword(const u32 w)
+{
+	u8 bytes[4];
+
+	*(u32*)(&bytes[0]) = w;
+	bytes[0] = aes_sbox[bytes[0]];
+	bytes[1] = aes_sbox[bytes[1]];
+	bytes[2] = aes_sbox[bytes[2]];
+	bytes[3] = aes_sbox[bytes[3]];
+	return *(u32*)(&bytes[0]);
+}
+
+/* The encrypt (forward) Rijndael key schedule algorithm pseudo code:
+ * (Note that AES words are 32 bit long)
+ *
+ * KeyExpansion(byte key[4*Nk], word w[Nb*(Nr+1)], Nk){
+ * word temp
+ * i = 0
+ * while (i < Nk) {
+ *   w[i] = word(key[4*i, 4*i + 1, 4*i + 2, 4*i + 3])
+ *   i = i + 1
+ * }
+ * i = Nk
+ *
+ * while (i < (Nb * (Nr + 1))) {
+ *   temp = w[i - 1]
+ *   if ((i mod Nk) == 0) {
+ *     temp = SubWord(RotWord(temp)) xor Rcon[i/Nk]
+ *   }
+ *   else if ((Nk > 6) && ((i mod Nk) == 4)) {
+ *     temp = SubWord(temp)
+ *   }
+ *   w[i] = w[i - Nk] xor temp
+ * }
+ * RotWord(t) does a 8 bit cyclic shift left on a 32 bit word.
+ * SubWord(t) applies the AES s-box individually to each octet
+ * in a 32 bit word.
+ *
+ * For AES Nk can have the values 4, 6, and 8 (corresponding to
+ * values for Nr of 10, 12, and 14).  Nb is always 4.
+ *
+ * To construct w[i], w[i - 1] and w[i - Nk] must be
+ * available.  Consequently we must keep a state of the last Nk words
+ * to be able to create the last round keys.
+ */
+static void get_aes_decrypt_key(unsigned char *dec_key, const unsigned  char *key, unsigned int keylength)
+{
+	u32 temp;
+	u32 w_ring[8]; /* nk is max 8, use elements 0..(nk - 1) as a ringbuffer */
+	u8  w_last_ix;
+	int i;
+	u8  nr, nk;
+
+	switch (keylength){
+	case 128:
+		nk = 4;
+		nr = 10;
+		break;
+	case 192:
+		nk = 6;
+		nr = 12;
+		break;
+	case 256:
+		nk = 8;
+		nr = 14;
+		break;
+	default:
+		panic("stream co-processor: bad aes key length in get_aes_decrypt_key\n");
+	};
+
+	/* Need to do host byte order correction here since key is byte oriented and the
+	 * kx algorithm is word (u32) oriented. */
+	for (i = 0; i < nk; i+=1) {
+		w_ring[i] = be32_to_cpu(*(u32*)&key[4*i]);
+	}
+
+	i = (int)nk;
+	w_last_ix = i - 1;
+	while (i < (4 * (nr + 2))) {
+		temp = w_ring[w_last_ix];
+		if (!(i % nk)) {
+			/* RotWord(temp) */
+			temp = (temp << 8) | (temp >> 24);
+			temp = aes_ks_subword(temp);
+			temp ^= round_constant[i/nk - 1];
+		} else if ((nk > 6) && ((i % nk) == 4)) {
+			temp = aes_ks_subword(temp);
+		}
+		w_last_ix = (w_last_ix + 1) % nk; /* This is the same as (i-Nk) mod Nk */
+		temp ^= w_ring[w_last_ix];
+		w_ring[w_last_ix] = temp;
+
+		/* We need the round keys for round Nr+1 and Nr+2 (round key
+		 * Nr+2 is the round key beyond the last one used when
+		 * encrypting).  Rounds are numbered starting from 0, Nr=10
+		 * implies 11 rounds are used in encryption/decryption.
+		 */
+		if (i >= (4 * nr)) {
+			/* Need to do host byte order correction here, the key
+			 * is byte oriented. */
+			*(u32*)dec_key = cpu_to_be32(temp);
+			dec_key += 4;
+		}
+		++i;
+	}
+}
+
+
+/**** Job/operation management. ****/
+
+int cryptocop_job_queue_insert_csum(struct cryptocop_operation *operation)
+{
+	return cryptocop_job_queue_insert(cryptocop_prio_kernel_csum, operation);
+}
+
+int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation)
+{
+	return cryptocop_job_queue_insert(cryptocop_prio_kernel, operation);
+}
+
+int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation)
+{
+	return cryptocop_job_queue_insert(cryptocop_prio_user, operation);
+}
+
+static int cryptocop_job_queue_insert(cryptocop_queue_priority prio, struct cryptocop_operation *operation)
+{
+	int                           ret;
+	struct cryptocop_prio_job     *pj = NULL;
+	unsigned long int             flags;
+
+	DEBUG(printk("cryptocop_job_queue_insert(%d, 0x%p)\n", prio, operation));
+
+	if (!operation || !operation->cb){
+		DEBUG_API(printk("cryptocop_job_queue_insert oper=0x%p, NULL operation or callback\n", operation));
+		return -EINVAL;
+	}
+
+	if ((ret = cryptocop_job_setup(&pj, operation)) != 0){
+		DEBUG_API(printk("cryptocop_job_queue_insert: job setup failed\n"));
+		return ret;
+	}
+	assert(pj != NULL);
+
+	spin_lock_irqsave(&cryptocop_job_queue_lock, flags);
+	list_add_tail(&pj->node, &cryptocop_job_queues[prio].jobs);
+	spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags);
+
+	/* Make sure a job is running */
+	cryptocop_start_job();
+	return 0;
+}
+
+static void cryptocop_do_tasklet(unsigned long unused);
+DECLARE_TASKLET (cryptocop_tasklet, cryptocop_do_tasklet, 0);
+
+static void cryptocop_do_tasklet(unsigned long unused)
+{
+	struct list_head             *node;
+	struct cryptocop_prio_job    *pj = NULL;
+	unsigned long                flags;
+
+	DEBUG(printk("cryptocop_do_tasklet: entering\n"));
+
+	do {
+		spin_lock_irqsave(&cryptocop_completed_jobs_lock, flags);
+		if (!list_empty(&cryptocop_completed_jobs)){
+			node = cryptocop_completed_jobs.next;
+			list_del(node);
+			pj = list_entry(node, struct cryptocop_prio_job, node);
+		} else {
+			pj = NULL;
+		}
+		spin_unlock_irqrestore(&cryptocop_completed_jobs_lock, flags);
+		if (pj) {
+			assert(pj->oper != NULL);
+
+			/* Notify consumer of operation completeness. */
+			DEBUG(printk("cryptocop_do_tasklet: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data));
+
+			pj->oper->operation_status = 0; /* Job is completed. */
+			pj->oper->cb(pj->oper, pj->oper->cb_data);
+			delete_internal_operation(pj->iop);
+			kfree(pj);
+		}
+	} while (pj != NULL);
+
+	DEBUG(printk("cryptocop_do_tasklet: exiting\n"));
+}
+
+static irqreturn_t
+dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct cryptocop_prio_job *done_job;
+	reg_dma_rw_ack_intr ack_intr = {
+		.data = 1,
+	};
+
+	REG_WR (dma, regi_dma9, rw_ack_intr, ack_intr);
+
+	DEBUG(printk("cryptocop DMA done\n"));
+
+	spin_lock(&running_job_lock);
+	if (cryptocop_running_job == NULL){
+		printk("stream co-processor got interrupt when not busy\n");
+		spin_unlock(&running_job_lock);
+		return IRQ_HANDLED;
+	}
+	done_job = cryptocop_running_job;
+	cryptocop_running_job = NULL;
+	spin_unlock(&running_job_lock);
+
+	/* Start processing a job. */
+	if (!spin_trylock(&cryptocop_process_lock)){
+		DEBUG(printk("cryptocop irq handler, not starting a job\n"));
+	} else {
+		cryptocop_start_job();
+		spin_unlock(&cryptocop_process_lock);
+	}
+
+	done_job->oper->operation_status = 0; /* Job is completed. */
+	if (done_job->oper->fast_callback){
+		/* This operation wants callback from interrupt. */
+		done_job->oper->cb(done_job->oper, done_job->oper->cb_data);
+		delete_internal_operation(done_job->iop);
+		kfree(done_job);
+	} else {
+		spin_lock(&cryptocop_completed_jobs_lock);
+		list_add_tail(&(done_job->node), &cryptocop_completed_jobs);
+		spin_unlock(&cryptocop_completed_jobs_lock);
+		tasklet_schedule(&cryptocop_tasklet);
+	}
+
+	DEBUG(printk("cryptocop leave irq handler\n"));
+	return IRQ_HANDLED;
+}
+
+
+/* Setup interrupts and DMA channels. */
+static int init_cryptocop(void)
+{
+	unsigned long          flags;
+	reg_intr_vect_rw_mask  intr_mask;
+	reg_dma_rw_cfg         dma_cfg = {.en = 1};
+	reg_dma_rw_intr_mask   intr_mask_in = {.data = regk_dma_yes}; /* Only want descriptor interrupts from the DMA in channel. */
+	reg_dma_rw_ack_intr    ack_intr = {.data = 1,.in_eop = 1 };
+	reg_strcop_rw_cfg      strcop_cfg = {
+		.ipend = regk_strcop_little,
+		.td1 = regk_strcop_e,
+		.td2 = regk_strcop_d,
+		.td3 = regk_strcop_e,
+		.ignore_sync = 0,
+		.en = 1
+	};
+
+	if (request_irq(DMA9_INTR_VECT, dma_done_interrupt, 0, "stream co-processor DMA", NULL)) panic("request_irq stream co-processor irq dma9");
+
+	(void)crisv32_request_dma(8, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp);
+	(void)crisv32_request_dma(9, "strcop", DMA_PANIC_ON_ERROR, 0, dma_strp);
+
+	local_irq_save(flags);
+
+	/* Reset and enable the cryptocop. */
+	strcop_cfg.en = 0;
+	REG_WR(strcop, regi_strcop, rw_cfg, strcop_cfg);
+	strcop_cfg.en = 1;
+	REG_WR(strcop, regi_strcop, rw_cfg, strcop_cfg);
+
+	/* Enable DMA9 interrupt */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.dma9 = 1;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	/* Enable DMAs. */
+	REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */
+	REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */
+
+	/* Set up wordsize = 4 for DMAs. */
+	DMA_WR_CMD (regi_dma8, regk_dma_set_w_size4);
+	DMA_WR_CMD (regi_dma9, regk_dma_set_w_size4);
+
+	/* Enable interrupts. */
+	REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in);
+
+	/* Clear intr ack. */
+	REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/* Free used cryptocop hw resources (interrupt and DMA channels). */
+static void release_cryptocop(void)
+{
+	unsigned long          flags;
+	reg_intr_vect_rw_mask  intr_mask;
+	reg_dma_rw_cfg         dma_cfg = {.en = 0};
+	reg_dma_rw_intr_mask   intr_mask_in = {0};
+	reg_dma_rw_ack_intr    ack_intr = {.data = 1,.in_eop = 1 };
+
+	local_irq_save(flags);
+
+	/* Clear intr ack. */
+	REG_WR(dma, regi_dma9, rw_ack_intr, ack_intr);
+
+	/* Disable DMA9 interrupt */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.dma9 = 0;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	/* Disable DMAs. */
+	REG_WR(dma, regi_dma9, rw_cfg, dma_cfg); /* input DMA */
+	REG_WR(dma, regi_dma8, rw_cfg, dma_cfg); /* output DMA */
+
+	/* Disable interrupts. */
+	REG_WR(dma, regi_dma9, rw_intr_mask, intr_mask_in);
+
+	local_irq_restore(flags);
+
+	free_irq(DMA9_INTR_VECT, NULL);
+
+	(void)crisv32_free_dma(8);
+	(void)crisv32_free_dma(9);
+}
+
+
+/* Init job queue. */
+static int cryptocop_job_queue_init(void)
+{
+	int i;
+
+	INIT_LIST_HEAD(&cryptocop_completed_jobs);
+
+	for (i = 0; i < cryptocop_prio_no_prios; i++){
+		cryptocop_job_queues[i].prio = (cryptocop_queue_priority)i;
+		INIT_LIST_HEAD(&cryptocop_job_queues[i].jobs);
+	}
+	return 0;
+}
+
+
+static void cryptocop_job_queue_close(void)
+{
+	struct list_head               *node, *tmp;
+	struct cryptocop_prio_job      *pj = NULL;
+	unsigned long int              process_flags, flags;
+	int                            i;
+
+	/* FIXME: This is as yet untested code. */
+
+	/* Stop strcop from getting an operation to process while we are closing the
+	   module. */
+	spin_lock_irqsave(&cryptocop_process_lock, process_flags);
+
+	/* Empty the job queue. */
+	spin_lock_irqsave(&cryptocop_process_lock, process_flags);
+	for (i = 0; i < cryptocop_prio_no_prios; i++){
+		if (!list_empty(&(cryptocop_job_queues[i].jobs))){
+			list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) {
+				pj = list_entry(node, struct cryptocop_prio_job, node);
+				list_del(node);
+
+				/* Call callback to notify consumer of job removal. */
+				DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data));
+				pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */
+				pj->oper->cb(pj->oper, pj->oper->cb_data);
+
+				delete_internal_operation(pj->iop);
+				kfree(pj);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&cryptocop_process_lock, process_flags);
+
+	/* Remove the running job, if any. */
+	spin_lock_irqsave(&running_job_lock, flags);
+	if (cryptocop_running_job){
+		reg_strcop_rw_cfg rw_cfg;
+		reg_dma_rw_cfg    dma_out_cfg, dma_in_cfg;
+
+		/* Stop DMA. */
+		dma_out_cfg = REG_RD(dma, regi_dma8, rw_cfg);
+		dma_out_cfg.en = regk_dma_no;
+		REG_WR(dma, regi_dma8, rw_cfg, dma_out_cfg);
+
+		dma_in_cfg = REG_RD(dma, regi_dma9, rw_cfg);
+		dma_in_cfg.en = regk_dma_no;
+		REG_WR(dma, regi_dma9, rw_cfg, dma_in_cfg);
+
+		/* Disble the cryptocop. */
+		rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg);
+		rw_cfg.en = 0;
+		REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg);
+
+		pj = cryptocop_running_job;
+		cryptocop_running_job = NULL;
+
+		/* Call callback to notify consumer of job removal. */
+		DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data));
+		pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */
+		pj->oper->cb(pj->oper, pj->oper->cb_data);
+
+		delete_internal_operation(pj->iop);
+		kfree(pj);
+	}
+	spin_unlock_irqrestore(&running_job_lock, flags);
+
+	/* Remove completed jobs, if any. */
+	spin_lock_irqsave(&cryptocop_completed_jobs_lock, flags);
+
+	list_for_each_safe(node, tmp, &cryptocop_completed_jobs) {
+		pj = list_entry(node, struct cryptocop_prio_job, node);
+		list_del(node);
+		/* Call callback to notify consumer of job removal. */
+		DEBUG(printk("cryptocop_job_queue_close: callback 0x%p, data 0x%p\n", pj->oper->cb, pj->oper->cb_data));
+		pj->oper->operation_status = -EINTR; /* Job is terminated without completion. */
+		pj->oper->cb(pj->oper, pj->oper->cb_data);
+
+		delete_internal_operation(pj->iop);
+		kfree(pj);
+	}
+	spin_unlock_irqrestore(&cryptocop_completed_jobs_lock, flags);
+}
+
+
+static void cryptocop_start_job(void)
+{
+	int                          i;
+	struct cryptocop_prio_job    *pj;
+	unsigned long int            flags;
+	unsigned long int            running_job_flags;
+	reg_strcop_rw_cfg            rw_cfg = {.en = 1, .ignore_sync = 0};
+
+	DEBUG(printk("cryptocop_start_job: entering\n"));
+
+	spin_lock_irqsave(&running_job_lock, running_job_flags);
+	if (cryptocop_running_job != NULL){
+		/* Already running. */
+		DEBUG(printk("cryptocop_start_job: already running, exit\n"));
+		spin_unlock_irqrestore(&running_job_lock, running_job_flags);
+		return;
+	}
+	spin_lock_irqsave(&cryptocop_job_queue_lock, flags);
+
+	/* Check the queues in priority order. */
+	for (i = cryptocop_prio_kernel_csum; (i < cryptocop_prio_no_prios) && list_empty(&cryptocop_job_queues[i].jobs); i++);
+	if (i == cryptocop_prio_no_prios) {
+		spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags);
+		spin_unlock_irqrestore(&running_job_lock, running_job_flags);
+		DEBUG(printk("cryptocop_start_job: no jobs to run\n"));
+		return; /* No jobs to run */
+	}
+	DEBUG(printk("starting job for prio %d\n", i));
+
+	/* TODO: Do not starve lower priority jobs.  Let in a lower
+	 * prio job for every N-th processed higher prio job or some
+	 * other scheduling policy.  This could reasonably be
+	 * tweakable since the optimal balance would depend on the
+	 * type of load on the system. */
+
+	/* Pull the DMA lists from the job and start the DMA client. */
+	pj = list_entry(cryptocop_job_queues[i].jobs.next, struct cryptocop_prio_job, node);
+	list_del(&pj->node);
+	spin_unlock_irqrestore(&cryptocop_job_queue_lock, flags);
+	cryptocop_running_job = pj;
+
+	/* Set config register (3DES and CSUM modes). */
+	switch (pj->iop->tdes_mode){
+	case cryptocop_3des_eee:
+		rw_cfg.td1 = regk_strcop_e;
+		rw_cfg.td2 = regk_strcop_e;
+		rw_cfg.td3 = regk_strcop_e;
+		break;
+	case cryptocop_3des_eed:
+		rw_cfg.td1 = regk_strcop_e;
+		rw_cfg.td2 = regk_strcop_e;
+		rw_cfg.td3 = regk_strcop_d;
+		break;
+	case cryptocop_3des_ede:
+		rw_cfg.td1 = regk_strcop_e;
+		rw_cfg.td2 = regk_strcop_d;
+		rw_cfg.td3 = regk_strcop_e;
+		break;
+	case cryptocop_3des_edd:
+		rw_cfg.td1 = regk_strcop_e;
+		rw_cfg.td2 = regk_strcop_d;
+		rw_cfg.td3 = regk_strcop_d;
+		break;
+	case cryptocop_3des_dee:
+		rw_cfg.td1 = regk_strcop_d;
+		rw_cfg.td2 = regk_strcop_e;
+		rw_cfg.td3 = regk_strcop_e;
+		break;
+	case cryptocop_3des_ded:
+		rw_cfg.td1 = regk_strcop_d;
+		rw_cfg.td2 = regk_strcop_e;
+		rw_cfg.td3 = regk_strcop_d;
+		break;
+	case cryptocop_3des_dde:
+		rw_cfg.td1 = regk_strcop_d;
+		rw_cfg.td2 = regk_strcop_d;
+		rw_cfg.td3 = regk_strcop_e;
+		break;
+	case cryptocop_3des_ddd:
+		rw_cfg.td1 = regk_strcop_d;
+		rw_cfg.td2 = regk_strcop_d;
+		rw_cfg.td3 = regk_strcop_d;
+		break;
+	default:
+		DEBUG(printk("cryptocop_setup_dma_list: bad 3DES mode\n"));
+	}
+	switch (pj->iop->csum_mode){
+	case cryptocop_csum_le:
+		rw_cfg.ipend = regk_strcop_little;
+		break;
+	case cryptocop_csum_be:
+		rw_cfg.ipend = regk_strcop_big;
+		break;
+	default:
+		DEBUG(printk("cryptocop_setup_dma_list: bad checksum mode\n"));
+	}
+	REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg);
+
+	DEBUG(printk("cryptocop_start_job: starting DMA, new cryptocop_running_job=0x%p\n"
+		     "ctx_in: 0x%p, phys: 0x%p\n"
+		     "ctx_out: 0x%p, phys: 0x%p\n",
+		     pj,
+		     &pj->iop->ctx_in, (char*)virt_to_phys(&pj->iop->ctx_in),
+		     &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out)));
+
+	/* Start input DMA. */
+	DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in));
+
+	/* Start output DMA. */
+	DMA_START_CONTEXT(regi_dma8, virt_to_phys(&pj->iop->ctx_out));
+
+	spin_unlock_irqrestore(&running_job_lock, running_job_flags);
+	DEBUG(printk("cryptocop_start_job: exiting\n"));
+}
+
+
+static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_operation *operation)
+{
+	int  err;
+	int  alloc_flag = operation->in_interrupt ? GFP_ATOMIC : GFP_KERNEL;
+	void *iop_alloc_ptr = NULL;
+
+	*pj = kmalloc(sizeof (struct cryptocop_prio_job), alloc_flag);
+	if (!*pj) return -ENOMEM;
+
+	DEBUG(printk("cryptocop_job_setup: operation=0x%p\n", operation));
+
+	(*pj)->oper = operation;
+	DEBUG(printk("cryptocop_job_setup, cb=0x%p cb_data=0x%p\n",  (*pj)->oper->cb, (*pj)->oper->cb_data));
+
+	if (operation->use_dmalists) {
+		DEBUG(print_user_dma_lists(&operation->list_op));
+		if (!operation->list_op.inlist || !operation->list_op.outlist || !operation->list_op.out_data_buf || !operation->list_op.in_data_buf){
+			DEBUG_API(printk("cryptocop_job_setup: bad indata (use_dmalists)\n"));
+			kfree(*pj);
+			return -EINVAL;
+		}
+		iop_alloc_ptr = kmalloc(DESCR_ALLOC_PAD + sizeof(struct cryptocop_int_operation), alloc_flag);
+		if (!iop_alloc_ptr) {
+			DEBUG_API(printk("cryptocop_job_setup: kmalloc cryptocop_int_operation\n"));
+			kfree(*pj);
+			return -ENOMEM;
+		}
+		(*pj)->iop = (struct cryptocop_int_operation*)(((unsigned long int)(iop_alloc_ptr + DESCR_ALLOC_PAD + offsetof(struct cryptocop_int_operation, ctx_out)) & ~0x0000001F) - offsetof(struct cryptocop_int_operation, ctx_out));
+		DEBUG(memset((*pj)->iop, 0xff, sizeof(struct cryptocop_int_operation)));
+		(*pj)->iop->alloc_ptr = iop_alloc_ptr;
+		(*pj)->iop->sid = operation->sid;
+		(*pj)->iop->cdesc_out = NULL;
+		(*pj)->iop->cdesc_in = NULL;
+		(*pj)->iop->tdes_mode = operation->list_op.tdes_mode;
+		(*pj)->iop->csum_mode = operation->list_op.csum_mode;
+		(*pj)->iop->ddesc_out = operation->list_op.outlist;
+		(*pj)->iop->ddesc_in = operation->list_op.inlist;
+
+		/* Setup DMA contexts. */
+		(*pj)->iop->ctx_out.next = NULL;
+		(*pj)->iop->ctx_out.eol = 1;
+		(*pj)->iop->ctx_out.saved_data = operation->list_op.outlist;
+		(*pj)->iop->ctx_out.saved_data_buf = operation->list_op.out_data_buf;
+
+		(*pj)->iop->ctx_in.next = NULL;
+		(*pj)->iop->ctx_in.eol = 1;
+		(*pj)->iop->ctx_in.saved_data = operation->list_op.inlist;
+		(*pj)->iop->ctx_in.saved_data_buf = operation->list_op.in_data_buf;
+	} else {
+		if ((err = cryptocop_setup_dma_list(operation, &(*pj)->iop, alloc_flag))) {
+			DEBUG_API(printk("cryptocop_job_setup: cryptocop_setup_dma_list failed %d\n", err));
+			kfree(*pj);
+			return err;
+		}
+	}
+	DEBUG(print_dma_descriptors((*pj)->iop));
+
+	DEBUG(printk("cryptocop_job_setup, DMA list setup successful\n"));
+
+	return 0;
+}
+
+
+static int cryptocop_open(struct inode *inode, struct file *filp)
+{
+	int p = MINOR(inode->i_rdev);
+
+	if (p != CRYPTOCOP_MINOR) return -EINVAL;
+
+	filp->private_data = NULL;
+	return 0;
+}
+
+
+static int cryptocop_release(struct inode *inode, struct file *filp)
+{
+	struct cryptocop_private *dev = filp->private_data;
+	struct cryptocop_private *dev_next;
+
+	while (dev){
+		dev_next = dev->next;
+		if (dev->sid != CRYPTOCOP_SESSION_ID_NONE) {
+			(void)cryptocop_free_session(dev->sid);
+		}
+		kfree(dev);
+		dev = dev_next;
+	}
+
+	return 0;
+}
+
+
+static int cryptocop_ioctl_close_session(struct inode *inode, struct file *filp,
+					 unsigned int cmd, unsigned long arg)
+{
+	struct cryptocop_private  *dev = filp->private_data;
+	struct cryptocop_private  *prev_dev = NULL;
+	struct strcop_session_op  *sess_op = (struct strcop_session_op *)arg;
+	struct strcop_session_op  sop;
+	int                       err;
+
+	DEBUG(printk("cryptocop_ioctl_close_session\n"));
+
+	if (!access_ok(VERIFY_READ, sess_op, sizeof(struct strcop_session_op)))
+		return -EFAULT;
+	err = copy_from_user(&sop, sess_op, sizeof(struct strcop_session_op));
+	if (err) return -EFAULT;
+
+	while (dev && (dev->sid != sop.ses_id)) {
+		prev_dev = dev;
+		dev = dev->next;
+	}
+	if (dev){
+		if (prev_dev){
+			prev_dev->next = dev->next;
+		} else {
+			filp->private_data = dev->next;
+		}
+		err = cryptocop_free_session(dev->sid);
+		if (err) return -EFAULT;
+	} else {
+		DEBUG_API(printk("cryptocop_ioctl_close_session: session %lld not found\n", sop.ses_id));
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static void ioctl_process_job_callback(struct cryptocop_operation *op, void*cb_data)
+{
+	struct ioctl_job_cb_ctx *jc = (struct ioctl_job_cb_ctx *)cb_data;
+
+	DEBUG(printk("ioctl_process_job_callback: op=0x%p, cb_data=0x%p\n", op, cb_data));
+
+	jc->processed = 1;
+	wake_up(&cryptocop_ioc_process_wq);
+}
+
+
+#define CRYPTOCOP_IOCTL_CIPHER_TID  (1)
+#define CRYPTOCOP_IOCTL_DIGEST_TID  (2)
+#define CRYPTOCOP_IOCTL_CSUM_TID    (3)
+
+static size_t first_cfg_change_ix(struct strcop_crypto_op *crp_op)
+{
+	size_t ch_ix = 0;
+
+	if (crp_op->do_cipher) ch_ix = crp_op->cipher_start;
+	if (crp_op->do_digest && (crp_op->digest_start < ch_ix)) ch_ix = crp_op->digest_start;
+	if (crp_op->do_csum && (crp_op->csum_start < ch_ix)) ch_ix = crp_op->csum_start;
+
+	DEBUG(printk("first_cfg_change_ix: ix=%d\n", ch_ix));
+	return ch_ix;
+}
+
+
+static size_t next_cfg_change_ix(struct strcop_crypto_op *crp_op, size_t ix)
+{
+	size_t ch_ix = INT_MAX;
+	size_t tmp_ix = 0;
+
+	if (crp_op->do_cipher && ((crp_op->cipher_start + crp_op->cipher_len) > ix)){
+		if (crp_op->cipher_start > ix) {
+			ch_ix = crp_op->cipher_start;
+		} else {
+			ch_ix = crp_op->cipher_start + crp_op->cipher_len;
+		}
+	}
+	if (crp_op->do_digest && ((crp_op->digest_start + crp_op->digest_len) > ix)){
+		if (crp_op->digest_start > ix) {
+			tmp_ix = crp_op->digest_start;
+		} else {
+			tmp_ix = crp_op->digest_start + crp_op->digest_len;
+		}
+		if (tmp_ix < ch_ix) ch_ix = tmp_ix;
+	}
+	if (crp_op->do_csum && ((crp_op->csum_start + crp_op->csum_len) > ix)){
+		if (crp_op->csum_start > ix) {
+			tmp_ix = crp_op->csum_start;
+		} else {
+			tmp_ix = crp_op->csum_start + crp_op->csum_len;
+		}
+		if (tmp_ix < ch_ix) ch_ix = tmp_ix;
+	}
+	if (ch_ix == INT_MAX) ch_ix = ix;
+	DEBUG(printk("next_cfg_change_ix prev ix=%d, next ix=%d\n", ix, ch_ix));
+	return ch_ix;
+}
+
+
+/* Map map_length bytes from the pages starting on *pageix and *pageoffset to iovecs starting on *iovix.
+ * Return -1 for ok, 0 for fail. */
+static int map_pages_to_iovec(struct iovec *iov, int iovlen, int *iovix, struct page **pages, int nopages, int *pageix, int *pageoffset, int map_length )
+{
+	int tmplen;
+
+	assert(iov != NULL);
+	assert(iovix != NULL);
+	assert(pages != NULL);
+	assert(pageix != NULL);
+	assert(pageoffset != NULL);
+
+	DEBUG(printk("map_pages_to_iovec, map_length=%d, iovlen=%d, *iovix=%d, nopages=%d, *pageix=%d, *pageoffset=%d\n", map_length, iovlen, *iovix, nopages, *pageix, *pageoffset));
+
+	while (map_length > 0){
+		DEBUG(printk("map_pages_to_iovec, map_length=%d, iovlen=%d, *iovix=%d, nopages=%d, *pageix=%d, *pageoffset=%d\n", map_length, iovlen, *iovix, nopages, *pageix, *pageoffset));
+		if (*iovix >= iovlen){
+			DEBUG_API(printk("map_page_to_iovec: *iovix=%d >= iovlen=%d\n", *iovix, iovlen));
+			return 0;
+		}
+		if (*pageix >= nopages){
+			DEBUG_API(printk("map_page_to_iovec: *pageix=%d >= nopages=%d\n", *pageix, nopages));
+			return 0;
+		}
+		iov[*iovix].iov_base = (unsigned char*)page_address(pages[*pageix]) + *pageoffset;
+		tmplen = PAGE_SIZE - *pageoffset;
+		if (tmplen < map_length){
+			(*pageoffset) = 0;
+			(*pageix)++;
+		} else {
+			tmplen = map_length;
+			(*pageoffset) += map_length;
+		}
+		DEBUG(printk("mapping %d bytes from page %d (or %d) to iovec %d\n", tmplen, *pageix, *pageix-1, *iovix));
+		iov[*iovix].iov_len = tmplen;
+		map_length -= tmplen;
+		(*iovix)++;
+	}
+	DEBUG(printk("map_page_to_iovec, exit, *iovix=%d\n", *iovix));
+	return -1;
+}
+
+
+
+static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int                             i;
+	struct cryptocop_private        *dev = filp->private_data;
+	struct strcop_crypto_op         *crp_oper = (struct strcop_crypto_op *)arg;
+	struct strcop_crypto_op         oper = {0};
+	int                             err = 0;
+	struct cryptocop_operation      *cop = NULL;
+
+	struct ioctl_job_cb_ctx         *jc = NULL;
+
+	struct page                     **inpages = NULL;
+	struct page                     **outpages = NULL;
+	int                             noinpages = 0;
+	int                             nooutpages = 0;
+
+	struct cryptocop_desc           descs[5]; /* Max 5 descriptors are needed, there are three transforms that
+						   * can get connected/disconnected on different places in the indata. */
+	struct cryptocop_desc_cfg       dcfgs[5*3];
+	int                             desc_ix = 0;
+	int                             dcfg_ix = 0;
+	struct cryptocop_tfrm_cfg       ciph_tcfg = {0};
+	struct cryptocop_tfrm_cfg       digest_tcfg = {0};
+	struct cryptocop_tfrm_cfg       csum_tcfg = {0};
+
+	unsigned char                   *digest_result = NULL;
+	int                             digest_length = 0;
+	int                             cblocklen = 0;
+	unsigned char                   csum_result[CSUM_BLOCK_LENGTH];
+	struct cryptocop_session        *sess;
+
+	int    iovlen = 0;
+	int    iovix = 0;
+	int    pageix = 0;
+	int    pageoffset = 0;
+
+	size_t prev_ix = 0;
+	size_t next_ix;
+
+	int    cipher_active, digest_active, csum_active;
+	int    end_digest, end_csum;
+	int    digest_done = 0;
+	int    cipher_done = 0;
+	int    csum_done = 0;
+
+	DEBUG(printk("cryptocop_ioctl_process\n"));
+
+	if (!access_ok(VERIFY_WRITE, crp_oper, sizeof(struct strcop_crypto_op))){
+		DEBUG_API(printk("cryptocop_ioctl_process: !access_ok crp_oper!\n"));
+		return -EFAULT;
+	}
+	if (copy_from_user(&oper, crp_oper, sizeof(struct strcop_crypto_op))) {
+		DEBUG_API(printk("cryptocop_ioctl_process: copy_from_user\n"));
+		return -EFAULT;
+	}
+	DEBUG(print_strcop_crypto_op(&oper));
+
+	while (dev && dev->sid != oper.ses_id) dev = dev->next;
+	if (!dev){
+		DEBUG_API(printk("cryptocop_ioctl_process: session %lld not found\n", oper.ses_id));
+		return -EINVAL;
+	}
+
+	/* Check buffers. */
+	if (((oper.indata + oper.inlen) < oper.indata) || ((oper.cipher_outdata + oper.cipher_outlen) < oper.cipher_outdata)){
+		DEBUG_API(printk("cryptocop_ioctl_process: user buffers wrapped around, bad user!\n"));
+		return -EINVAL;
+	}
+
+	if (!access_ok(VERIFY_WRITE, oper.cipher_outdata, oper.cipher_outlen)){
+		DEBUG_API(printk("cryptocop_ioctl_process: !access_ok out data!\n"));
+		return -EFAULT;
+	}
+	if (!access_ok(VERIFY_READ, oper.indata, oper.inlen)){
+		DEBUG_API(printk("cryptocop_ioctl_process: !access_ok in data!\n"));
+		return -EFAULT;
+	}
+
+	cop = kmalloc(sizeof(struct cryptocop_operation), GFP_KERNEL);
+	if (!cop) {
+		DEBUG_API(printk("cryptocop_ioctl_process: kmalloc\n"));
+		return -ENOMEM;
+	}
+	jc = kmalloc(sizeof(struct ioctl_job_cb_ctx), GFP_KERNEL);
+	if (!jc) {
+		DEBUG_API(printk("cryptocop_ioctl_process: kmalloc\n"));
+		err = -ENOMEM;
+		goto error_cleanup;
+	}
+	jc->processed = 0;
+
+	cop->cb_data = jc;
+	cop->cb = ioctl_process_job_callback;
+	cop->operation_status = 0;
+	cop->use_dmalists = 0;
+	cop->in_interrupt = 0;
+	cop->fast_callback = 0;
+	cop->tfrm_op.tfrm_cfg = NULL;
+	cop->tfrm_op.desc = NULL;
+	cop->tfrm_op.indata = NULL;
+	cop->tfrm_op.incount = 0;
+	cop->tfrm_op.inlen = 0;
+	cop->tfrm_op.outdata = NULL;
+	cop->tfrm_op.outcount = 0;
+	cop->tfrm_op.outlen = 0;
+
+	sess = get_session(oper.ses_id);
+	if (!sess){
+		DEBUG_API(printk("cryptocop_ioctl_process: bad session id.\n"));
+		kfree(cop);
+		kfree(jc);
+		return -EINVAL;
+	}
+
+	if (oper.do_cipher) {
+		unsigned int                    cipher_outlen = 0;
+		struct cryptocop_transform_ctx  *tc = get_transform_ctx(sess, CRYPTOCOP_IOCTL_CIPHER_TID);
+		if (!tc) {
+			DEBUG_API(printk("cryptocop_ioctl_process: no cipher transform in session.\n"));
+			err = -EINVAL;
+			goto error_cleanup;
+		}
+		ciph_tcfg.tid = CRYPTOCOP_IOCTL_CIPHER_TID;
+		ciph_tcfg.inject_ix = 0;
+		ciph_tcfg.flags = 0;
+		if ((oper.cipher_start < 0) || (oper.cipher_len <= 0) || (oper.cipher_start > oper.inlen) || ((oper.cipher_start + oper.cipher_len) > oper.inlen)){
+			DEBUG_API(printk("cryptocop_ioctl_process: bad cipher length\n"));
+			kfree(cop);
+			kfree(jc);
+			return -EINVAL;
+		}
+		cblocklen = tc->init.alg == cryptocop_alg_aes ? AES_BLOCK_LENGTH : DES_BLOCK_LENGTH;
+		if (oper.cipher_len % cblocklen) {
+			kfree(cop);
+			kfree(jc);
+			DEBUG_API(printk("cryptocop_ioctl_process: cipher inlength not multiple of block length.\n"));
+			return -EINVAL;
+		}
+		cipher_outlen = oper.cipher_len;
+		if (tc->init.cipher_mode == cryptocop_cipher_mode_cbc){
+			if (oper.cipher_explicit) {
+				ciph_tcfg.flags |= CRYPTOCOP_EXPLICIT_IV;
+				memcpy(ciph_tcfg.iv, oper.cipher_iv, cblocklen);
+			} else {
+				cipher_outlen = oper.cipher_len - cblocklen;
+			}
+		} else {
+			if (oper.cipher_explicit){
+				kfree(cop);
+				kfree(jc);
+				DEBUG_API(printk("cryptocop_ioctl_process: explicit_iv when not CBC mode\n"));
+				return -EINVAL;
+			}
+		}
+		if (oper.cipher_outlen != cipher_outlen) {
+			kfree(cop);
+			kfree(jc);
+			DEBUG_API(printk("cryptocop_ioctl_process: cipher_outlen incorrect, should be %d not %d.\n", cipher_outlen, oper.cipher_outlen));
+			return -EINVAL;
+		}
+
+		if (oper.decrypt){
+			ciph_tcfg.flags |= CRYPTOCOP_DECRYPT;
+		} else {
+			ciph_tcfg.flags |= CRYPTOCOP_ENCRYPT;
+		}
+		ciph_tcfg.next = cop->tfrm_op.tfrm_cfg;
+		cop->tfrm_op.tfrm_cfg = &ciph_tcfg;
+	}
+	if (oper.do_digest){
+		struct cryptocop_transform_ctx *tc = get_transform_ctx(sess, CRYPTOCOP_IOCTL_DIGEST_TID);
+		if (!tc) {
+			DEBUG_API(printk("cryptocop_ioctl_process: no digest transform in session.\n"));
+			err = -EINVAL;
+			goto error_cleanup;
+		}
+		digest_length = tc->init.alg == cryptocop_alg_md5 ? 16 : 20;
+		digest_result = kmalloc(digest_length, GFP_KERNEL);
+		if (!digest_result) {
+			DEBUG_API(printk("cryptocop_ioctl_process: kmalloc digest_result\n"));
+			err = -EINVAL;
+			goto error_cleanup;
+		}
+		DEBUG(memset(digest_result, 0xff, digest_length));
+
+		digest_tcfg.tid = CRYPTOCOP_IOCTL_DIGEST_TID;
+		digest_tcfg.inject_ix = 0;
+		ciph_tcfg.inject_ix += digest_length;
+		if ((oper.digest_start < 0) || (oper.digest_len <= 0) || (oper.digest_start > oper.inlen) || ((oper.digest_start + oper.digest_len) > oper.inlen)){
+			DEBUG_API(printk("cryptocop_ioctl_process: bad digest length\n"));
+			err = -EINVAL;
+			goto error_cleanup;
+		}
+
+		digest_tcfg.next = cop->tfrm_op.tfrm_cfg;
+		cop->tfrm_op.tfrm_cfg = &digest_tcfg;
+	}
+	if (oper.do_csum){
+		csum_tcfg.tid = CRYPTOCOP_IOCTL_CSUM_TID;
+		csum_tcfg.inject_ix = digest_length;
+		ciph_tcfg.inject_ix += 2;
+
+		if ((oper.csum_start < 0) || (oper.csum_len <= 0) || (oper.csum_start > oper.inlen) || ((oper.csum_start + oper.csum_len) > oper.inlen)){
+			DEBUG_API(printk("cryptocop_ioctl_process: bad csum length\n"));
+			kfree(cop);
+			kfree(jc);
+			return -EINVAL;
+		}
+
+		csum_tcfg.next = cop->tfrm_op.tfrm_cfg;
+		cop->tfrm_op.tfrm_cfg = &csum_tcfg;
+	}
+
+	prev_ix = first_cfg_change_ix(&oper);
+	if (prev_ix > oper.inlen) {
+		DEBUG_API(printk("cryptocop_ioctl_process: length mismatch\n"));
+		nooutpages = noinpages = 0;
+		err = -EINVAL;
+		goto error_cleanup;
+	}
+	DEBUG(printk("cryptocop_ioctl_process: inlen=%d, cipher_outlen=%d\n", oper.inlen, oper.cipher_outlen));
+
+	/* Map user pages for in and out data of the operation. */
+	noinpages = (((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK) + oper.inlen - 1 - prev_ix + ~PAGE_MASK) >> PAGE_SHIFT;
+	DEBUG(printk("cryptocop_ioctl_process: noinpages=%d\n", noinpages));
+	inpages = kmalloc(noinpages * sizeof(struct page*), GFP_KERNEL);
+	if (!inpages){
+		DEBUG_API(printk("cryptocop_ioctl_process: kmalloc inpages\n"));
+		nooutpages = noinpages = 0;
+		err = -ENOMEM;
+		goto error_cleanup;
+	}
+	if (oper.do_cipher){
+		nooutpages = (((unsigned long int)oper.cipher_outdata & ~PAGE_MASK) + oper.cipher_outlen - 1 + ~PAGE_MASK) >> PAGE_SHIFT;
+		DEBUG(printk("cryptocop_ioctl_process: nooutpages=%d\n", nooutpages));
+		outpages = kmalloc(nooutpages * sizeof(struct page*), GFP_KERNEL);
+		if (!outpages){
+			DEBUG_API(printk("cryptocop_ioctl_process: kmalloc outpages\n"));
+			nooutpages = noinpages = 0;
+			err = -ENOMEM;
+			goto error_cleanup;
+		}
+	}
+
+	/* Acquire the mm page semaphore. */
+	down_read(&current->mm->mmap_sem);
+
+	err = get_user_pages(current,
+			     current->mm,
+			     (unsigned long int)(oper.indata + prev_ix),
+			     noinpages,
+			     0,  /* read access only for in data */
+			     0, /* no force */
+			     inpages,
+			     NULL);
+
+	if (err < 0) {
+		up_read(&current->mm->mmap_sem);
+		nooutpages = noinpages = 0;
+		DEBUG_API(printk("cryptocop_ioctl_process: get_user_pages indata\n"));
+		goto error_cleanup;
+	}
+	noinpages = err;
+	if (oper.do_cipher){
+		err = get_user_pages(current,
+				     current->mm,
+				     (unsigned long int)oper.cipher_outdata,
+				     nooutpages,
+				     1, /* write access for out data */
+				     0, /* no force */
+				     outpages,
+				     NULL);
+		up_read(&current->mm->mmap_sem);
+		if (err < 0) {
+			nooutpages = 0;
+			DEBUG_API(printk("cryptocop_ioctl_process: get_user_pages outdata\n"));
+			goto error_cleanup;
+		}
+		nooutpages = err;
+	} else {
+		up_read(&current->mm->mmap_sem);
+	}
+
+	/* Add 6 to nooutpages to make room for possibly inserted buffers for storing digest and
+	 * csum output and splits when units are (dis-)connected. */
+	cop->tfrm_op.indata = kmalloc((noinpages) * sizeof(struct iovec), GFP_KERNEL);
+	cop->tfrm_op.outdata = kmalloc((6 + nooutpages) * sizeof(struct iovec), GFP_KERNEL);
+	if (!cop->tfrm_op.indata || !cop->tfrm_op.outdata) {
+		DEBUG_API(printk("cryptocop_ioctl_process: kmalloc iovecs\n"));
+		err = -ENOMEM;
+		goto error_cleanup;
+	}
+
+	cop->tfrm_op.inlen = oper.inlen - prev_ix;
+	cop->tfrm_op.outlen = 0;
+	if (oper.do_cipher) cop->tfrm_op.outlen += oper.cipher_outlen;
+	if (oper.do_digest) cop->tfrm_op.outlen += digest_length;
+	if (oper.do_csum) cop->tfrm_op.outlen += 2;
+
+	/* Setup the in iovecs. */
+	cop->tfrm_op.incount = noinpages;
+	if (noinpages > 1){
+		size_t tmplen = cop->tfrm_op.inlen;
+
+		cop->tfrm_op.indata[0].iov_len = PAGE_SIZE - ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK);
+		cop->tfrm_op.indata[0].iov_base = (unsigned char*)page_address(inpages[0]) + ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK);
+		tmplen -= cop->tfrm_op.indata[0].iov_len;
+		for (i = 1; i<noinpages; i++){
+			cop->tfrm_op.indata[i].iov_len = tmplen < PAGE_SIZE ? tmplen : PAGE_SIZE;
+			cop->tfrm_op.indata[i].iov_base = (unsigned char*)page_address(inpages[i]);
+			tmplen -= PAGE_SIZE;
+		}
+	} else {
+		cop->tfrm_op.indata[0].iov_len = oper.inlen - prev_ix;
+		cop->tfrm_op.indata[0].iov_base = (unsigned char*)page_address(inpages[0]) + ((unsigned long int)(oper.indata + prev_ix) & ~PAGE_MASK);
+	}
+
+	iovlen = nooutpages + 6;
+	pageoffset = oper.do_cipher ? ((unsigned long int)oper.cipher_outdata & ~PAGE_MASK) : 0;
+
+	next_ix = next_cfg_change_ix(&oper, prev_ix);
+	if (prev_ix == next_ix){
+		DEBUG_API(printk("cryptocop_ioctl_process: length configuration broken.\n"));
+		err = -EINVAL;  /* This should be impossible barring bugs. */
+		goto error_cleanup;
+	}
+	while (prev_ix != next_ix){
+		end_digest = end_csum = cipher_active = digest_active = csum_active = 0;
+		descs[desc_ix].cfg = NULL;
+		descs[desc_ix].length = next_ix - prev_ix;
+
+		if (oper.do_cipher && (oper.cipher_start < next_ix) && (prev_ix < (oper.cipher_start + oper.cipher_len))) {
+			dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_CIPHER_TID;
+			dcfgs[dcfg_ix].src = cryptocop_source_dma;
+			cipher_active = 1;
+
+			if (next_ix == (oper.cipher_start + oper.cipher_len)){
+				cipher_done = 1;
+				dcfgs[dcfg_ix].last = 1;
+			} else {
+				dcfgs[dcfg_ix].last = 0;
+			}
+			dcfgs[dcfg_ix].next = descs[desc_ix].cfg;
+			descs[desc_ix].cfg = &dcfgs[dcfg_ix];
+			++dcfg_ix;
+		}
+		if (oper.do_digest && (oper.digest_start < next_ix) && (prev_ix < (oper.digest_start + oper.digest_len))) {
+			digest_active = 1;
+			dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_DIGEST_TID;
+			dcfgs[dcfg_ix].src = cryptocop_source_dma;
+			if (next_ix == (oper.digest_start + oper.digest_len)){
+				assert(!digest_done);
+				digest_done = 1;
+				dcfgs[dcfg_ix].last = 1;
+			} else {
+				dcfgs[dcfg_ix].last = 0;
+			}
+			dcfgs[dcfg_ix].next = descs[desc_ix].cfg;
+			descs[desc_ix].cfg = &dcfgs[dcfg_ix];
+			++dcfg_ix;
+		}
+		if (oper.do_csum && (oper.csum_start < next_ix) && (prev_ix < (oper.csum_start + oper.csum_len))){
+			csum_active = 1;
+			dcfgs[dcfg_ix].tid = CRYPTOCOP_IOCTL_CSUM_TID;
+			dcfgs[dcfg_ix].src = cryptocop_source_dma;
+			if (next_ix == (oper.csum_start + oper.csum_len)){
+				csum_done = 1;
+				dcfgs[dcfg_ix].last = 1;
+			} else {
+				dcfgs[dcfg_ix].last = 0;
+			}
+			dcfgs[dcfg_ix].next = descs[desc_ix].cfg;
+			descs[desc_ix].cfg = &dcfgs[dcfg_ix];
+			++dcfg_ix;
+		}
+		if (!descs[desc_ix].cfg){
+			DEBUG_API(printk("cryptocop_ioctl_process: data segment %d (%d to %d) had no active transforms\n", desc_ix, prev_ix, next_ix));
+			err = -EINVAL;
+			goto error_cleanup;
+		}
+		descs[desc_ix].next = &(descs[desc_ix]) + 1;
+		++desc_ix;
+		prev_ix = next_ix;
+		next_ix = next_cfg_change_ix(&oper, prev_ix);
+	}
+	if (desc_ix > 0){
+		descs[desc_ix-1].next = NULL;
+	} else {
+		descs[0].next = NULL;
+	}
+	if (oper.do_digest) {
+		DEBUG(printk("cryptocop_ioctl_process: mapping %d byte digest output to iovec %d\n", digest_length, iovix));
+		/* Add outdata iovec, length == <length of type of digest> */
+		cop->tfrm_op.outdata[iovix].iov_base = digest_result;
+		cop->tfrm_op.outdata[iovix].iov_len = digest_length;
+		++iovix;
+	}
+	if (oper.do_csum) {
+		/* Add outdata iovec, length == 2, the length of csum. */
+		DEBUG(printk("cryptocop_ioctl_process: mapping 2 byte csum output to iovec %d\n", iovix));
+		/* Add outdata iovec, length == <length of type of digest> */
+		cop->tfrm_op.outdata[iovix].iov_base = csum_result;
+		cop->tfrm_op.outdata[iovix].iov_len = 2;
+		++iovix;
+	}
+	if (oper.do_cipher) {
+		if (!map_pages_to_iovec(cop->tfrm_op.outdata, iovlen, &iovix, outpages, nooutpages, &pageix, &pageoffset, oper.cipher_outlen)){
+			DEBUG_API(printk("cryptocop_ioctl_process: failed to map pages to iovec.\n"));
+			err = -ENOSYS; /* This should be impossible barring bugs. */
+			goto error_cleanup;
+		}
+	}
+	DEBUG(printk("cryptocop_ioctl_process: setting cop->tfrm_op.outcount %d\n", iovix));
+	cop->tfrm_op.outcount = iovix;
+	assert(iovix <= (nooutpages + 6));
+
+	cop->sid = oper.ses_id;
+	cop->tfrm_op.desc = &descs[0];
+
+	DEBUG(printk("cryptocop_ioctl_process: inserting job, cb_data=0x%p\n", cop->cb_data));
+
+	if ((err = cryptocop_job_queue_insert_user_job(cop)) != 0) {
+		DEBUG_API(printk("cryptocop_ioctl_process: insert job %d\n", err));
+		err = -EINVAL;
+		goto error_cleanup;
+	}
+
+	DEBUG(printk("cryptocop_ioctl_process: begin wait for result\n"));
+
+	wait_event(cryptocop_ioc_process_wq, (jc->processed != 0));
+	DEBUG(printk("cryptocop_ioctl_process: end wait for result\n"));
+        if (!jc->processed){
+		printk(KERN_WARNING "cryptocop_ioctl_process: job not processed at completion\n");
+		err = -EIO;
+		goto error_cleanup;
+	}
+
+	/* Job process done.  Cipher output should already be correct in job so no post processing of outdata. */
+	DEBUG(printk("cryptocop_ioctl_process: operation_status = %d\n", cop->operation_status));
+	if (cop->operation_status == 0){
+		if (oper.do_digest){
+			DEBUG(printk("cryptocop_ioctl_process: copy %d bytes digest to user\n", digest_length));
+			err = copy_to_user((unsigned char*)crp_oper + offsetof(struct strcop_crypto_op, digest), digest_result, digest_length);
+			if (0 != err){
+				DEBUG_API(printk("cryptocop_ioctl_process: copy_to_user, digest length %d, err %d\n", digest_length, err));
+				err = -EFAULT;
+				goto error_cleanup;
+			}
+		}
+		if (oper.do_csum){
+			DEBUG(printk("cryptocop_ioctl_process: copy 2 bytes checksum to user\n"));
+			err = copy_to_user((unsigned char*)crp_oper + offsetof(struct strcop_crypto_op, csum), csum_result, 2);
+			if (0 != err){
+				DEBUG_API(printk("cryptocop_ioctl_process: copy_to_user, csum, err %d\n", err));
+				err = -EFAULT;
+				goto error_cleanup;
+			}
+		}
+		err = 0;
+	} else {
+		DEBUG(printk("cryptocop_ioctl_process: returning err = operation_status = %d\n", cop->operation_status));
+		err = cop->operation_status;
+	}
+
+ error_cleanup:
+	/* Release page caches. */
+	for (i = 0; i < noinpages; i++){
+		put_page(inpages[i]);
+	}
+	for (i = 0; i < nooutpages; i++){
+		int spdl_err;
+		/* Mark output pages dirty. */
+		spdl_err = set_page_dirty_lock(outpages[i]);
+		DEBUG(if (spdl_err)printk("cryptocop_ioctl_process: set_page_dirty_lock returned %d\n", spdl_err));
+	}
+	for (i = 0; i < nooutpages; i++){
+		put_page(outpages[i]);
+	}
+
+	if (digest_result) kfree(digest_result);
+	if (inpages) kfree(inpages);
+	if (outpages) kfree(outpages);
+	if (cop){
+		if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata);
+		if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata);
+		kfree(cop);
+	}
+	if (jc) kfree(jc);
+
+	DEBUG(print_lock_status());
+
+	return err;
+}
+
+
+static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	cryptocop_session_id             sid;
+	int                              err;
+	struct cryptocop_private         *dev;
+	struct strcop_session_op         *sess_op = (struct strcop_session_op *)arg;
+	struct strcop_session_op         sop;
+	struct cryptocop_transform_init  *tis = NULL;
+	struct cryptocop_transform_init  ti_cipher = {0};
+	struct cryptocop_transform_init  ti_digest = {0};
+	struct cryptocop_transform_init  ti_csum = {0};
+
+	if (!access_ok(VERIFY_WRITE, sess_op, sizeof(struct strcop_session_op)))
+		return -EFAULT;
+	err = copy_from_user(&sop, sess_op, sizeof(struct strcop_session_op));
+	if (err) return -EFAULT;
+	if (sop.cipher != cryptocop_cipher_none) {
+		if (!access_ok(VERIFY_READ, sop.key, sop.keylen)) return -EFAULT;
+	}
+	DEBUG(printk("cryptocop_ioctl_create_session, sess_op:\n"));
+
+	DEBUG(printk("\tcipher:%d\n"
+		     "\tcipher_mode:%d\n"
+		     "\tdigest:%d\n"
+		     "\tcsum:%d\n",
+		     (int)sop.cipher,
+		     (int)sop.cmode,
+		     (int)sop.digest,
+		     (int)sop.csum));
+
+	if (sop.cipher != cryptocop_cipher_none){
+		/* Init the cipher. */
+		switch (sop.cipher){
+		case cryptocop_cipher_des:
+			ti_cipher.alg = cryptocop_alg_des;
+			break;
+		case cryptocop_cipher_3des:
+			ti_cipher.alg = cryptocop_alg_3des;
+			break;
+		case cryptocop_cipher_aes:
+			ti_cipher.alg = cryptocop_alg_aes;
+			break;
+		default:
+			DEBUG_API(printk("create session, bad cipher algorithm %d\n", sop.cipher));
+			return -EINVAL;
+		};
+		DEBUG(printk("setting cipher transform %d\n", ti_cipher.alg));
+		copy_from_user(ti_cipher.key, sop.key, sop.keylen/8);
+		ti_cipher.keylen = sop.keylen;
+		switch (sop.cmode){
+		case cryptocop_cipher_mode_cbc:
+		case cryptocop_cipher_mode_ecb:
+			ti_cipher.cipher_mode = sop.cmode;
+			break;
+		default:
+			DEBUG_API(printk("create session, bad cipher mode %d\n", sop.cmode));
+			return -EINVAL;
+		}
+		DEBUG(printk("cryptocop_ioctl_create_session: setting CBC mode %d\n", ti_cipher.cipher_mode));
+		switch (sop.des3_mode){
+		case cryptocop_3des_eee:
+		case cryptocop_3des_eed:
+		case cryptocop_3des_ede:
+		case cryptocop_3des_edd:
+		case cryptocop_3des_dee:
+		case cryptocop_3des_ded:
+		case cryptocop_3des_dde:
+		case cryptocop_3des_ddd:
+			ti_cipher.tdes_mode = sop.des3_mode;
+			break;
+		default:
+			DEBUG_API(printk("create session, bad 3DES mode %d\n", sop.des3_mode));
+			return -EINVAL;
+		}
+		ti_cipher.tid = CRYPTOCOP_IOCTL_CIPHER_TID;
+		ti_cipher.next = tis;
+		tis = &ti_cipher;
+	} /* if (sop.cipher != cryptocop_cipher_none) */
+	if (sop.digest != cryptocop_digest_none){
+		DEBUG(printk("setting digest transform\n"));
+		switch (sop.digest){
+		case cryptocop_digest_md5:
+			ti_digest.alg = cryptocop_alg_md5;
+			break;
+		case cryptocop_digest_sha1:
+			ti_digest.alg = cryptocop_alg_sha1;
+			break;
+		default:
+			DEBUG_API(printk("create session, bad digest algorithm %d\n", sop.digest));
+			return -EINVAL;
+		}
+		ti_digest.tid = CRYPTOCOP_IOCTL_DIGEST_TID;
+		ti_digest.next = tis;
+		tis = &ti_digest;
+	} /* if (sop.digest != cryptocop_digest_none) */
+	if (sop.csum != cryptocop_csum_none){
+		DEBUG(printk("setting csum transform\n"));
+		switch (sop.csum){
+		case cryptocop_csum_le:
+		case cryptocop_csum_be:
+			ti_csum.csum_mode = sop.csum;
+			break;
+		default:
+			DEBUG_API(printk("create session, bad checksum algorithm %d\n", sop.csum));
+			return -EINVAL;
+		}
+		ti_csum.alg = cryptocop_alg_csum;
+		ti_csum.tid = CRYPTOCOP_IOCTL_CSUM_TID;
+		ti_csum.next = tis;
+		tis = &ti_csum;
+	} /* (sop.csum != cryptocop_csum_none) */
+	dev = kmalloc(sizeof(struct cryptocop_private), GFP_KERNEL);
+	if (!dev){
+		DEBUG_API(printk("create session, alloc dev\n"));
+		return -ENOMEM;
+	}
+
+	err = cryptocop_new_session(&sid, tis, GFP_KERNEL);
+	DEBUG({ if (err) printk("create session, cryptocop_new_session %d\n", err);});
+
+	if (err) {
+		kfree(dev);
+		return err;
+	}
+	sess_op->ses_id = sid;
+	dev->sid = sid;
+	dev->next = filp->private_data;
+	filp->private_data = dev;
+
+	return 0;
+}
+
+static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) {
+		DEBUG_API(printk("cryptocop_ioctl: wrong type\n"));
+		return -ENOTTY;
+	}
+	if (_IOC_NR(cmd) > CRYPTOCOP_IO_MAXNR){
+		return -ENOTTY;
+	}
+	/* Access check of the argument.  Some commands, e.g. create session and process op,
+	   needs additional checks.  Those are handled in the command handling functions. */
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd));
+	else if (_IOC_DIR(cmd) & _IOC_WRITE)
+		err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd));
+	if (err) return -EFAULT;
+
+	switch (cmd) {
+	case CRYPTOCOP_IO_CREATE_SESSION:
+		return cryptocop_ioctl_create_session(inode, filp, cmd, arg);
+	case CRYPTOCOP_IO_CLOSE_SESSION:
+		return cryptocop_ioctl_close_session(inode, filp, cmd, arg);
+	case CRYPTOCOP_IO_PROCESS_OP:
+		return cryptocop_ioctl_process(inode, filp, cmd, arg);
+	default:
+		DEBUG_API(printk("cryptocop_ioctl: unknown command\n"));
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+
+#ifdef LDEBUG
+static void print_dma_descriptors(struct cryptocop_int_operation *iop)
+{
+	struct cryptocop_dma_desc *cdesc_out = iop->cdesc_out;
+	struct cryptocop_dma_desc *cdesc_in = iop->cdesc_in;
+	int                       i;
+
+	printk("print_dma_descriptors start\n");
+
+	printk("iop:\n");
+	printk("\tsid: 0x%lld\n", iop->sid);
+
+	printk("\tcdesc_out: 0x%p\n", iop->cdesc_out);
+	printk("\tcdesc_in: 0x%p\n", iop->cdesc_in);
+	printk("\tddesc_out: 0x%p\n", iop->ddesc_out);
+	printk("\tddesc_in: 0x%p\n", iop->ddesc_in);
+
+	printk("\niop->ctx_out: 0x%p phys: 0x%p\n", &iop->ctx_out, (char*)virt_to_phys(&iop->ctx_out));
+	printk("\tnext: 0x%p\n"
+	       "\tsaved_data: 0x%p\n"
+	       "\tsaved_data_buf: 0x%p\n",
+	       iop->ctx_out.next,
+	       iop->ctx_out.saved_data,
+	       iop->ctx_out.saved_data_buf);
+
+	printk("\niop->ctx_in: 0x%p phys: 0x%p\n", &iop->ctx_in, (char*)virt_to_phys(&iop->ctx_in));
+	printk("\tnext: 0x%p\n"
+	       "\tsaved_data: 0x%p\n"
+	       "\tsaved_data_buf: 0x%p\n",
+	       iop->ctx_in.next,
+	       iop->ctx_in.saved_data,
+	       iop->ctx_in.saved_data_buf);
+
+	i = 0;
+	while (cdesc_out) {
+		dma_descr_data *td;
+		printk("cdesc_out %d, desc=0x%p\n", i, cdesc_out->dma_descr);
+		printk("\n\tvirt_to_phys(desc): 0x%p\n", (char*)virt_to_phys(cdesc_out->dma_descr));
+		td = cdesc_out->dma_descr;
+		printk("\n\tbuf: 0x%p\n"
+		       "\tafter: 0x%p\n"
+		       "\tmd: 0x%04x\n"
+		       "\tnext: 0x%p\n",
+		       td->buf,
+		       td->after,
+		       td->md,
+		       td->next);
+		printk("flags:\n"
+		       "\twait:\t%d\n"
+		       "\teol:\t%d\n"
+		       "\touteop:\t%d\n"
+		       "\tineop:\t%d\n"
+		       "\tintr:\t%d\n",
+		       td->wait,
+		       td->eol,
+		       td->out_eop,
+		       td->in_eop,
+		       td->intr);
+		cdesc_out = cdesc_out->next;
+		i++;
+	}
+	i = 0;
+	while (cdesc_in) {
+		dma_descr_data *td;
+		printk("cdesc_in %d, desc=0x%p\n", i, cdesc_in->dma_descr);
+		printk("\n\tvirt_to_phys(desc): 0x%p\n", (char*)virt_to_phys(cdesc_in->dma_descr));
+		td = cdesc_in->dma_descr;
+		printk("\n\tbuf: 0x%p\n"
+		       "\tafter: 0x%p\n"
+		       "\tmd: 0x%04x\n"
+		       "\tnext: 0x%p\n",
+		       td->buf,
+		       td->after,
+		       td->md,
+		       td->next);
+		printk("flags:\n"
+		       "\twait:\t%d\n"
+		       "\teol:\t%d\n"
+		       "\touteop:\t%d\n"
+		       "\tineop:\t%d\n"
+		       "\tintr:\t%d\n",
+		       td->wait,
+		       td->eol,
+		       td->out_eop,
+		       td->in_eop,
+		       td->intr);
+		cdesc_in = cdesc_in->next;
+		i++;
+	}
+
+	printk("print_dma_descriptors end\n");
+}
+
+
+static void print_strcop_crypto_op(struct strcop_crypto_op *cop)
+{
+	printk("print_strcop_crypto_op, 0x%p\n", cop);
+
+	/* Indata. */
+	printk("indata=0x%p\n"
+	       "inlen=%d\n"
+	       "do_cipher=%d\n"
+	       "decrypt=%d\n"
+	       "cipher_explicit=%d\n"
+	       "cipher_start=%d\n"
+	       "cipher_len=%d\n"
+	       "outdata=0x%p\n"
+	       "outlen=%d\n",
+	       cop->indata,
+	       cop->inlen,
+	       cop->do_cipher,
+	       cop->decrypt,
+	       cop->cipher_explicit,
+	       cop->cipher_start,
+	       cop->cipher_len,
+	       cop->cipher_outdata,
+	       cop->cipher_outlen);
+
+	printk("do_digest=%d\n"
+	       "digest_start=%d\n"
+	       "digest_len=%d\n",
+	       cop->do_digest,
+	       cop->digest_start,
+	       cop->digest_len);
+
+	printk("do_csum=%d\n"
+	       "csum_start=%d\n"
+	       "csum_len=%d\n",
+	       cop->do_csum,
+	       cop->csum_start,
+	       cop->csum_len);
+}
+
+static void print_cryptocop_operation(struct cryptocop_operation *cop)
+{
+	struct cryptocop_desc      *d;
+	struct cryptocop_tfrm_cfg  *tc;
+	struct cryptocop_desc_cfg  *dc;
+	int                        i;
+
+	printk("print_cryptocop_operation, cop=0x%p\n\n", cop);
+	printk("sid: %lld\n", cop->sid);
+	printk("operation_status=%d\n"
+	       "use_dmalists=%d\n"
+	       "in_interrupt=%d\n"
+	       "fast_callback=%d\n",
+	       cop->operation_status,
+	       cop->use_dmalists,
+	       cop->in_interrupt,
+	       cop->fast_callback);
+
+	if (cop->use_dmalists){
+		print_user_dma_lists(&cop->list_op);
+	} else {
+		printk("cop->tfrm_op\n"
+		       "tfrm_cfg=0x%p\n"
+		       "desc=0x%p\n"
+		       "indata=0x%p\n"
+		       "incount=%d\n"
+		       "inlen=%d\n"
+		       "outdata=0x%p\n"
+		       "outcount=%d\n"
+		       "outlen=%d\n\n",
+		       cop->tfrm_op.tfrm_cfg,
+		       cop->tfrm_op.desc,
+		       cop->tfrm_op.indata,
+		       cop->tfrm_op.incount,
+		       cop->tfrm_op.inlen,
+		       cop->tfrm_op.outdata,
+		       cop->tfrm_op.outcount,
+		       cop->tfrm_op.outlen);
+
+		tc = cop->tfrm_op.tfrm_cfg;
+		while (tc){
+			printk("tfrm_cfg, 0x%p\n"
+			       "tid=%d\n"
+			       "flags=%d\n"
+			       "inject_ix=%d\n"
+			       "next=0x%p\n",
+			       tc,
+			       tc->tid,
+			       tc->flags,
+			       tc->inject_ix,
+			       tc->next);
+			tc = tc->next;
+		}
+		d = cop->tfrm_op.desc;
+		while (d){
+			printk("\n======================desc, 0x%p\n"
+			       "length=%d\n"
+			       "cfg=0x%p\n"
+			       "next=0x%p\n",
+			       d,
+			       d->length,
+			       d->cfg,
+			       d->next);
+			dc = d->cfg;
+			while (dc){
+				printk("=========desc_cfg, 0x%p\n"
+				       "tid=%d\n"
+				       "src=%d\n"
+				       "last=%d\n"
+				       "next=0x%p\n",
+				       dc,
+				       dc->tid,
+				       dc->src,
+				       dc->last,
+				       dc->next);
+				dc = dc->next;
+			}
+			d = d->next;
+		}
+		printk("\n====iniov\n");
+		for (i = 0; i < cop->tfrm_op.incount; i++){
+			printk("indata[%d]\n"
+			       "base=0x%p\n"
+			       "len=%d\n",
+			       i,
+			       cop->tfrm_op.indata[i].iov_base,
+			       cop->tfrm_op.indata[i].iov_len);
+		}
+		printk("\n====outiov\n");
+		for (i = 0; i < cop->tfrm_op.outcount; i++){
+			printk("outdata[%d]\n"
+			       "base=0x%p\n"
+			       "len=%d\n",
+			       i,
+			       cop->tfrm_op.outdata[i].iov_base,
+			       cop->tfrm_op.outdata[i].iov_len);
+		}
+	}
+	printk("------------end print_cryptocop_operation\n");
+}
+
+
+static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op)
+{
+	dma_descr_data *dd;
+	int i;
+
+	printk("print_user_dma_lists, dma_op=0x%p\n", dma_op);
+
+	printk("out_data_buf = 0x%p, phys_to_virt(out_data_buf) = 0x%p\n", dma_op->out_data_buf, phys_to_virt((unsigned long int)dma_op->out_data_buf));
+	printk("in_data_buf = 0x%p, phys_to_virt(in_data_buf) = 0x%p\n", dma_op->in_data_buf, phys_to_virt((unsigned long int)dma_op->in_data_buf));
+
+	printk("##############outlist\n");
+	dd = phys_to_virt((unsigned long int)dma_op->outlist);
+	i = 0;
+	while (dd != NULL) {
+		printk("#%d phys_to_virt(desc) 0x%p\n", i, dd);
+		printk("\n\tbuf: 0x%p\n"
+		       "\tafter: 0x%p\n"
+		       "\tmd: 0x%04x\n"
+		       "\tnext: 0x%p\n",
+		       dd->buf,
+		       dd->after,
+		       dd->md,
+		       dd->next);
+		printk("flags:\n"
+		       "\twait:\t%d\n"
+		       "\teol:\t%d\n"
+		       "\touteop:\t%d\n"
+		       "\tineop:\t%d\n"
+		       "\tintr:\t%d\n",
+		       dd->wait,
+		       dd->eol,
+		       dd->out_eop,
+		       dd->in_eop,
+		       dd->intr);
+		if (dd->eol)
+			dd = NULL;
+		else
+			dd = phys_to_virt((unsigned long int)dd->next);
+		++i;
+	}
+
+	printk("##############inlist\n");
+	dd = phys_to_virt((unsigned long int)dma_op->inlist);
+	i = 0;
+	while (dd != NULL) {
+		printk("#%d phys_to_virt(desc) 0x%p\n", i, dd);
+		printk("\n\tbuf: 0x%p\n"
+		       "\tafter: 0x%p\n"
+		       "\tmd: 0x%04x\n"
+		       "\tnext: 0x%p\n",
+		       dd->buf,
+		       dd->after,
+		       dd->md,
+		       dd->next);
+		printk("flags:\n"
+		       "\twait:\t%d\n"
+		       "\teol:\t%d\n"
+		       "\touteop:\t%d\n"
+		       "\tineop:\t%d\n"
+		       "\tintr:\t%d\n",
+		       dd->wait,
+		       dd->eol,
+		       dd->out_eop,
+		       dd->in_eop,
+		       dd->intr);
+		if (dd->eol)
+			dd = NULL;
+		else
+			dd = phys_to_virt((unsigned long int)dd->next);
+		++i;
+	}
+}
+
+
+static void print_lock_status(void)
+{
+	printk("**********************print_lock_status\n");
+	printk("cryptocop_completed_jobs_lock %d\n", spin_is_locked(&cryptocop_completed_jobs_lock));
+	printk("cryptocop_job_queue_lock %d\n", spin_is_locked(&cryptocop_job_queue_lock));
+	printk("descr_pool_lock %d\n", spin_is_locked(&descr_pool_lock));
+	printk("cryptocop_sessions_lock %d\n", spin_is_locked(cryptocop_sessions_lock));
+	printk("running_job_lock %d\n", spin_is_locked(running_job_lock));
+	printk("cryptocop_process_lock %d\n", spin_is_locked(cryptocop_process_lock));
+}
+#endif /* LDEBUG */
+
+
+static const char cryptocop_name[] = "ETRAX FS stream co-processor";
+
+static int init_stream_coprocessor(void)
+{
+	int err;
+	int i;
+	static int initialized = 0;
+
+	if (initialized)
+		return 0;
+
+	initialized = 1;
+
+	printk("ETRAX FS stream co-processor driver v0.01, (c) 2003 Axis Communications AB\n");
+
+	err = register_chrdev(CRYPTOCOP_MAJOR, cryptocop_name, &cryptocop_fops);
+	if (err < 0) {
+		printk(KERN_ERR "stream co-processor: could not get major number.\n");
+		return err;
+	}
+
+	err = init_cryptocop();
+	if (err) {
+		(void)unregister_chrdev(CRYPTOCOP_MAJOR, cryptocop_name);
+		return err;
+	}
+	err = cryptocop_job_queue_init();
+	if (err) {
+		release_cryptocop();
+		(void)unregister_chrdev(CRYPTOCOP_MAJOR, cryptocop_name);
+		return err;
+	}
+	/* Init the descriptor pool. */
+	for (i = 0; i < CRYPTOCOP_DESCRIPTOR_POOL_SIZE - 1; i++) {
+		descr_pool[i].from_pool = 1;
+		descr_pool[i].next = &descr_pool[i + 1];
+	}
+	descr_pool[i].from_pool = 1;
+	descr_pool[i].next = NULL;
+	descr_pool_free_list = &descr_pool[0];
+	descr_pool_no_free = CRYPTOCOP_DESCRIPTOR_POOL_SIZE;
+
+	spin_lock_init(&cryptocop_completed_jobs_lock);
+	spin_lock_init(&cryptocop_job_queue_lock);
+	spin_lock_init(&descr_pool_lock);
+	spin_lock_init(&cryptocop_sessions_lock);
+	spin_lock_init(&running_job_lock);
+	spin_lock_init(&cryptocop_process_lock);
+
+	cryptocop_sessions = NULL;
+	next_sid = 1;
+
+	cryptocop_running_job = NULL;
+
+	printk("stream co-processor: init done.\n");
+	return 0;
+}
+
+static void __exit exit_stream_coprocessor(void)
+{
+	release_cryptocop();
+	cryptocop_job_queue_close();
+}
+
+module_init(init_stream_coprocessor);
+module_exit(exit_stream_coprocessor);
+
diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/gpio.c
new file mode 100644
index 000000000000..a551237dcb5e
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/gpio.c
@@ -0,0 +1,766 @@
+/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $
+ *
+ * ETRAX CRISv32 general port I/O device
+ *
+ * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ *
+ * Authors:    Bjorn Wesen      (initial version)
+ *             Ola Knutsson     (LED handling)
+ *             Johan Adolfsson  (read/set directions, write, port G,
+ *                               port to ETRAX FS.
+ *
+ * $Log: gpio.c,v $
+ * Revision 1.16  2005/06/19 17:06:49  starvik
+ * Merge of Linux 2.6.12.
+ *
+ * Revision 1.15  2005/05/25 08:22:20  starvik
+ * Changed GPIO port order to fit packages/devices/axis-2.4.
+ *
+ * Revision 1.14  2005/04/24 18:35:08  starvik
+ * Updated with final register headers.
+ *
+ * Revision 1.13  2005/03/15 15:43:00  starvik
+ * dev_id needs to be supplied for shared IRQs.
+ *
+ * Revision 1.12  2005/03/10 17:12:00  starvik
+ * Protect alarm list with spinlock.
+ *
+ * Revision 1.11  2005/01/05 06:08:59  starvik
+ * No need to do local_irq_disable after local_irq_save.
+ *
+ * Revision 1.10  2004/11/19 08:38:31  starvik
+ * Removed old crap.
+ *
+ * Revision 1.9  2004/05/14 07:58:02  starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.8  2003/09/11 07:29:50  starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.7  2003/07/10 13:25:46  starvik
+ * Compiles for 2.5.74
+ * Lindented ethernet.c
+ *
+ * Revision 1.6  2003/07/04 08:27:46  starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5  2003/06/10 08:26:37  johana
+ * Etrax -> ETRAX CRISv32
+ *
+ * Revision 1.4  2003/06/05 14:22:48  johana
+ * Initialise some_alarms.
+ *
+ * Revision 1.3  2003/06/05 10:15:46  johana
+ * New INTR_VECT macros.
+ * Enable interrupts in global config.
+ *
+ * Revision 1.2  2003/06/03 15:52:50  johana
+ * Initial CRIS v32 version.
+ *
+ * Revision 1.1  2003/06/03 08:53:15  johana
+ * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7.
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/etraxgpio.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+/* The following gio ports on ETRAX FS is available:
+ * pa  8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
+ * pb 18 bits
+ * pc 18 bits
+ * pd 18 bits
+ * pe 18 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120  /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static int gpio_ioctl(struct inode *inode, struct file *file,
+		      unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+                          loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+	struct gpio_private *next;
+	/* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+	unsigned char clk_mask;
+	unsigned char data_mask;
+	unsigned char write_msb;
+	unsigned char pad1;
+	/* These fields are generic */
+	unsigned long highalarm, lowalarm;
+	wait_queue_head_t alarm_wq;
+	int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist = 0;
+
+static int gpio_some_alarms = 0; /* Set if someone uses alarm */
+static unsigned long gpio_pa_high_alarms = 0;
+static unsigned long gpio_pa_low_alarms = 0;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+#define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+unsigned long led_dummy;
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_dout),
+	GIO_REG_WR_ADDR(rw_pb_dout),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_dout),
+	GIO_REG_WR_ADDR(rw_pd_dout),
+	GIO_REG_WR_ADDR(rw_pe_dout),
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+	GIO_REG_RD_ADDR(r_pa_din),
+	GIO_REG_RD_ADDR(r_pb_din),
+	&led_dummy,
+	GIO_REG_RD_ADDR(r_pc_din),
+	GIO_REG_RD_ADDR(r_pd_din),
+	GIO_REG_RD_ADDR(r_pe_din),
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PD_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PE_CHANGEABLE_DIR,
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PD_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PE_CHANGEABLE_BITS,
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_oe),
+	GIO_REG_WR_ADDR(rw_pb_oe),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_oe),
+	GIO_REG_WR_ADDR(rw_pd_oe),
+	GIO_REG_WR_ADDR(rw_pe_oe),
+};
+
+
+
+static unsigned int
+gpio_poll(struct file *file,
+	  poll_table *wait)
+{
+	unsigned int mask = 0;
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	unsigned long data;
+	poll_wait(file, &priv->alarm_wq, wait);
+	if (priv->minor == GPIO_MINOR_A) {
+		reg_gio_rw_intr_cfg intr_cfg;
+		unsigned long tmp;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, REG_RD(gio, regi_gio, r_pa_din));
+		/* PA has support for interrupt
+		 * lets activate high for those low and with highalarm set
+		 */
+		intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+
+		tmp = ~data & priv->highalarm & 0xFF;
+                if (tmp & (1 << 0)) {
+			intr_cfg.pa0 = regk_gio_hi;
+		}
+                if (tmp & (1 << 1)) {
+			intr_cfg.pa1 = regk_gio_hi;
+		}
+                if (tmp & (1 << 2)) {
+			intr_cfg.pa2 = regk_gio_hi;
+		}
+                if (tmp & (1 << 3)) {
+			intr_cfg.pa3 = regk_gio_hi;
+		}
+                if (tmp & (1 << 4)) {
+			intr_cfg.pa4 = regk_gio_hi;
+		}
+                if (tmp & (1 << 5)) {
+			intr_cfg.pa5 = regk_gio_hi;
+		}
+                if (tmp & (1 << 6)) {
+			intr_cfg.pa6 = regk_gio_hi;
+		}
+                if (tmp & (1 << 7)) {
+			intr_cfg.pa7 = regk_gio_hi;
+		}
+		/*
+		 * lets activate low for those high and with lowalarm set
+		 */
+		tmp = data & priv->lowalarm & 0xFF;
+                if (tmp & (1 << 0)) {
+			intr_cfg.pa0 = regk_gio_lo;
+		}
+                if (tmp & (1 << 1)) {
+			intr_cfg.pa1 = regk_gio_lo;
+		}
+                if (tmp & (1 << 2)) {
+			intr_cfg.pa2 = regk_gio_lo;
+		}
+                if (tmp & (1 << 3)) {
+			intr_cfg.pa3 = regk_gio_lo;
+		}
+                if (tmp & (1 << 4)) {
+			intr_cfg.pa4 = regk_gio_lo;
+		}
+                if (tmp & (1 << 5)) {
+			intr_cfg.pa5 = regk_gio_lo;
+		}
+                if (tmp & (1 << 6)) {
+			intr_cfg.pa6 = regk_gio_lo;
+		}
+                if (tmp & (1 << 7)) {
+			intr_cfg.pa7 = regk_gio_lo;
+		}
+
+		REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+		local_irq_restore(flags);
+	} else if (priv->minor <= GPIO_MINOR_E)
+		data = *data_in[priv->minor];
+	else
+		return 0;
+
+	if ((data & priv->highalarm) ||
+	    (~data & priv->lowalarm)) {
+		mask = POLLIN|POLLRDNORM;
+	}
+
+	DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+	return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+	struct gpio_private *priv = alarmlist;
+	unsigned long data = 0;
+        int ret = 0;
+	while (priv) {
+		data = *data_in[priv->minor];
+		if ((data & priv->highalarm) ||
+		    (~data & priv->lowalarm)) {
+			DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+			wake_up_interruptible(&priv->alarm_wq);
+                        ret = 1;
+		}
+		priv = priv->next;
+	}
+        return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	if (gpio_some_alarms) {
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	}
+        return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	reg_gio_rw_intr_mask intr_mask;
+	reg_gio_r_masked_intr masked_intr;
+	reg_gio_rw_ack_intr ack_intr;
+	unsigned long tmp;
+	unsigned long tmp2;
+
+	/* Find what PA interrupts are active */
+	masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+	tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+	/* Find those that we have enabled */
+	spin_lock(&alarm_lock);
+	tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
+	spin_unlock(&alarm_lock);
+
+	/* Ack them */
+	ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+	REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+	/* Disable those interrupts.. */
+	intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+	tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+	tmp2 &= ~tmp;
+	intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+	REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+	if (gpio_some_alarms) {
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	}
+        return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+                          loff_t *off)
+{
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	unsigned char data, clk_mask, data_mask, write_msb;
+	unsigned long flags;
+	unsigned long shadow;
+	volatile unsigned long *port;
+	ssize_t retval = count;
+	/* Only bits 0-7 may be used for write operations but allow all
+	   devices except leds... */
+	if (priv->minor == GPIO_MINOR_LEDS) {
+		return -EFAULT;
+	}
+
+	if (!access_ok(VERIFY_READ, buf, count)) {
+		return -EFAULT;
+	}
+	clk_mask = priv->clk_mask;
+	data_mask = priv->data_mask;
+	/* It must have been configured using the IO_CFG_WRITE_MODE */
+	/* Perhaps a better error code? */
+	if (clk_mask == 0 || data_mask == 0) {
+		return -EPERM;
+	}
+	write_msb = priv->write_msb;
+	D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
+	port = data_out[priv->minor];
+
+	while (count--) {
+		int i;
+		data = *buf++;
+		if (priv->write_msb) {
+			for (i = 7; i >= 0;i--) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		} else {
+			for (i = 0; i <= 7;i++) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		}
+	}
+	return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *priv;
+	int p = MINOR(inode->i_rdev);
+
+	if (p > GPIO_MINOR_LAST)
+		return -EINVAL;
+
+	priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+					      GFP_KERNEL);
+
+	if (!priv)
+		return -ENOMEM;
+
+	priv->minor = p;
+
+	/* initialize the io/alarm struct and link it into our alarmlist */
+
+	priv->next = alarmlist;
+	alarmlist = priv;
+	priv->clk_mask = 0;
+	priv->data_mask = 0;
+	priv->highalarm = 0;
+	priv->lowalarm = 0;
+	init_waitqueue_head(&priv->alarm_wq);
+
+	filp->private_data = (void *)priv;
+
+	return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *p = alarmlist;
+	struct gpio_private *todel = (struct gpio_private *)filp->private_data;
+	/* local copies while updating them: */
+	unsigned long a_high, a_low;
+	unsigned long some_alarms;
+
+	/* unlink from alarmlist and free the private structure */
+
+	if (p == todel) {
+		alarmlist = todel->next;
+	} else {
+		while (p->next != todel)
+			p = p->next;
+		p->next = todel->next;
+	}
+
+	kfree(todel);
+	/* Check if there are still any alarms set */
+	p = alarmlist;
+        some_alarms = 0;
+	a_high = 0;
+	a_low = 0;
+	while (p) {
+		if (p->minor == GPIO_MINOR_A) {
+			a_high |= p->highalarm;
+			a_low |= p->lowalarm;
+		}
+
+		if (p->highalarm | p->lowalarm) {
+			some_alarms = 1;
+		}
+		p = p->next;
+	}
+
+	spin_lock(&alarm_lock);
+	gpio_some_alarms = some_alarms;
+	gpio_pa_high_alarms = a_high;
+	gpio_pa_low_alarms = a_low;
+	spin_unlock(&alarm_lock);
+
+	return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+	/* Set direction 0=unchanged 1=input,
+	 * return mask with 1=input
+	 */
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+
+	if (priv->minor == GPIO_MINOR_A)
+		dir_shadow ^= 0xFF;    /* Only 8 bits */
+	else
+		dir_shadow ^= 0x3FFFF; /* Only 18 bits */
+	return dir_shadow;
+
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow |=  (arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+	return dir_shadow;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+	   unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long val;
+	unsigned long shadow;
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+		// read the port
+		return *data_in[priv->minor];
+		break;
+	case IO_SETBITS:
+		local_irq_save(flags);
+                if (arg & 0x04)
+                  printk("GPIO SET 2\n");
+		// set changeable bits with a 1 in arg
+		shadow = *data_out[priv->minor];
+		shadow |=  (arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_CLRBITS:
+		local_irq_save(flags);
+                if (arg & 0x04)
+                  printk("GPIO CLR 2\n");
+		// clear changeable bits with a 1 in arg
+		shadow = *data_out[priv->minor];
+		shadow &=  ~(arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_HIGHALARM:
+		// set alarm when bits with 1 in arg go high
+		priv->highalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A) {
+			gpio_pa_high_alarms |= arg;
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_LOWALARM:
+		// set alarm when bits with 1 in arg go low
+		priv->lowalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A) {
+			gpio_pa_low_alarms |= arg;
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_CLRALARM:
+		// clear alarm for bits with 1 in arg
+		priv->highalarm &= ~arg;
+		priv->lowalarm  &= ~arg;
+		spin_lock(&alarm_lock);
+		if (priv->minor == GPIO_MINOR_A) {
+			if (gpio_pa_high_alarms & arg ||
+			    gpio_pa_low_alarms & arg) {
+				/* Must update the gpio_pa_*alarms masks */
+			}
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+		/* Read direction 0=input 1=output */
+		return *dir_oe[priv->minor];
+	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
+		 */
+		return setget_input(priv, arg);
+		break;
+	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
+		 */
+		return setget_output(priv, arg);
+
+	case IO_CFG_WRITE_MODE:
+	{
+		unsigned long dir_shadow;
+		dir_shadow = *dir_oe[priv->minor];
+
+		priv->clk_mask = arg & 0xFF;
+		priv->data_mask = (arg >> 8) & 0xFF;
+		priv->write_msb = (arg >> 16) & 0x01;
+		/* Check if we're allowed to change the bits and
+		 * the direction is correct
+		 */
+		if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+		      (priv->data_mask & changeable_bits[priv->minor]) &&
+		      (priv->clk_mask & dir_shadow) &&
+		      (priv->data_mask & dir_shadow)))
+		{
+			priv->clk_mask = 0;
+			priv->data_mask = 0;
+			return -EPERM;
+		}
+		break;
+	}
+	case IO_READ_INBITS:
+		/* *arg is result of reading the input pins */
+		val = *data_in[priv->minor];
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		return 0;
+		break;
+	case IO_READ_OUTBITS:
+		 /* *arg is result of reading the output shadow */
+		val = *data_out[priv->minor];
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_INPUT:
+		/* bits set in *arg is set to input,
+		 * *arg updated with current input pins.
+		 */
+		if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_input(priv, val);
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_OUTPUT:
+		/* bits set in *arg is set to output,
+		 * *arg updated with current output pins.
+		 */
+		if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_output(priv, val);
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	default:
+		if (priv->minor == GPIO_MINOR_LEDS)
+			return gpio_leds_ioctl(cmd, arg);
+		else
+			return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+	unsigned char green;
+	unsigned char red;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_LEDACTIVE_SET:
+		green = ((unsigned char) arg) & 1;
+		red   = (((unsigned char) arg) >> 1) & 1;
+		LED_ACTIVE_SET_G(green);
+		LED_ACTIVE_SET_R(red);
+		break;
+
+	default:
+		return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+struct file_operations gpio_fops = {
+	.owner       = THIS_MODULE,
+	.poll        = gpio_poll,
+	.ioctl       = gpio_ioctl,
+	.write       = gpio_write,
+	.open        = gpio_open,
+	.release     = gpio_release,
+};
+
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+	int res;
+	reg_intr_vect_rw_mask intr_mask;
+
+	/* do the formalities */
+
+	res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+	if (res < 0) {
+		printk(KERN_ERR "gpio: couldn't get a major number.\n");
+		return res;
+	}
+
+	/* Clear all leds */
+	LED_NETWORK_SET(0);
+	LED_ACTIVE_SET(0);
+	LED_DISK_READ(0);
+	LED_DISK_WRITE(0);
+
+	printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n");
+	/* We call etrax_gpio_wake_up_check() from timer interrupt and
+	 * from cpu_idle() in kernel/process.c
+	 * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
+	 * in some tests.
+	 */
+	if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt,
+			SA_SHIRQ | SA_INTERRUPT,"gpio poll", &alarmlist)) {
+		printk("err: timer0 irq for gpio\n");
+	}
+	if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt,
+			SA_SHIRQ | SA_INTERRUPT,"gpio PA", &alarmlist)) {
+		printk("err: PA irq for gpio\n");
+	}
+	/* enable the gio and timer irq in global config */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.timer = 1;
+	intr_mask.gen_io = 1;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
new file mode 100644
index 000000000000..440c20a94963
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -0,0 +1,611 @@
+/*!***************************************************************************
+*!
+*! FILE NAME  : i2c.c
+*!
+*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
+*!              kernel modules (i2c_writereg/readreg) and from userspace using
+*!              ioctl()'s
+*!
+*! Nov 30 1998  Torbjorn Eliasson  Initial version.
+*!              Bjorn Wesen        Elinux kernel version.
+*! Jan 14 2000  Johan Adolfsson    Fixed PB shadow register stuff -
+*!                                 don't use PB_I2C if DS1302 uses same bits,
+*!                                 use PB.
+*| June 23 2003 Pieter Grimmerink  Added 'i2c_sendnack'. i2c_readreg now
+*|                                 generates nack on last received byte,
+*|                                 instead of ack.
+*|                                 i2c_getack changed data level while clock
+*|                                 was high, causing DS75 to see  a stop condition
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */
+/****************** INCLUDE FILES SECTION ***********************************/
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/config.h>
+
+#include <asm/etraxi2c.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "i2c.h"
+
+/****************** I2C DEFINITION SECTION *************************/
+
+#define D(x)
+
+#define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static const char i2c_name[] = "i2c";
+
+#define CLOCK_LOW_TIME            8
+#define CLOCK_HIGH_TIME           8
+#define START_CONDITION_HOLD_TIME 8
+#define STOP_CONDITION_HOLD_TIME  8
+#define ENABLE_OUTPUT 0x01
+#define ENABLE_INPUT 0x00
+#define I2C_CLOCK_HIGH 1
+#define I2C_CLOCK_LOW 0
+#define I2C_DATA_HIGH 1
+#define I2C_DATA_LOW 0
+
+#define i2c_enable()
+#define i2c_disable()
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out)
+#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in)
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x)
+#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x)
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() crisv32_io_rd(&cris_i2c_data)
+
+#define i2c_delay(usecs) udelay(usecs)
+
+/****************** VARIABLE SECTION ************************************/
+
+static struct crisv32_iopin cris_i2c_clk;
+static struct crisv32_iopin cris_i2c_data;
+
+/****************** FUNCTION DEFINITION SECTION *************************/
+
+
+/* generate i2c start condition */
+
+void
+i2c_start(void)
+{
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_dir_out();
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_data(I2C_DATA_HIGH);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(START_CONDITION_HOLD_TIME);
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+}
+
+/* generate i2c stop condition */
+
+void
+i2c_stop(void)
+{
+	i2c_dir_out();
+
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME*2);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME*2);
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(STOP_CONDITION_HOLD_TIME);
+
+	i2c_dir_in();
+}
+
+/* write a byte to the i2c interface */
+
+void
+i2c_outbyte(unsigned char x)
+{
+	int i;
+
+	i2c_dir_out();
+
+	for (i = 0; i < 8; i++) {
+		if (x & 0x80) {
+			i2c_data(I2C_DATA_HIGH);
+		} else {
+			i2c_data(I2C_DATA_LOW);
+		}
+
+		i2c_delay(CLOCK_LOW_TIME/2);
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME/2);
+		x <<= 1;
+	}
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+}
+
+/* read a byte from the i2c interface */
+
+unsigned char
+i2c_inbyte(void)
+{
+	unsigned char aBitByte = 0;
+	int i;
+
+	/* Switch off I2C to get bit */
+	i2c_disable();
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/2);
+
+	/* Get bit */
+	aBitByte |= i2c_getbit();
+
+	/* Enable I2C */
+	i2c_enable();
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	for (i = 1; i < 8; i++) {
+		aBitByte <<= 1;
+		/* Clock pulse */
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME);
+
+		/* Switch off I2C to get bit */
+		i2c_disable();
+		i2c_dir_in();
+		i2c_delay(CLOCK_HIGH_TIME/2);
+
+		/* Get bit */
+		aBitByte |= i2c_getbit();
+
+		/* Enable I2C */
+		i2c_enable();
+		i2c_delay(CLOCK_LOW_TIME/2);
+	}
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+
+	/*
+	 * we leave the clock low, getbyte is usually followed
+	 * by sendack/nack, they assume the clock to be low
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	return aBitByte;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_getack
+*#
+*# DESCRIPTION  : checks if ack was received from ic2
+*#
+*#--------------------------------------------------------------------------*/
+
+int
+i2c_getack(void)
+{
+	int ack = 1;
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * Release data bus by setting
+	 * data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * generate ACK clock pulse
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	/*
+	 * Use PORT PB instead of I2C
+	 * for input. (I2C not working)
+	 */
+	i2c_clk(1);
+	i2c_data(1);
+	/*
+	 * switch off I2C
+	 */
+	i2c_data(1);
+	i2c_disable();
+	i2c_dir_in();
+	/*
+	 * now wait for ack
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	/*
+	 * check for ack
+	 */
+	if(i2c_getbit())
+		ack = 0;
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	if(!ack){
+		if(!i2c_getbit()) /* receiver pulld SDA low */
+			ack = 1;
+		i2c_delay(CLOCK_HIGH_TIME/2);
+	}
+
+   /*
+    * our clock is high now, make sure data is low
+    * before we enable our output. If we keep data high
+    * and enable output, we would generate a stop condition.
+    */
+   i2c_data(I2C_DATA_LOW);
+
+	/*
+	 * end clock pulse
+	 */
+	i2c_enable();
+	i2c_dir_out();
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * remove ACK clock pulse
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME/2);
+	return ack;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: I2C::sendAck
+*#
+*# DESCRIPTION  : Send ACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set ack pulse high
+	 */
+	i2c_data(I2C_DATA_LOW);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME/6);
+	/*
+	 * reset data out
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_sendnack
+*#
+*# DESCRIPTION  : Sends NACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendnack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_writereg
+*#
+*# DESCRIPTION  : Writes a value to an I2C device
+*#
+*#--------------------------------------------------------------------------*/
+int
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
+	     unsigned char theValue)
+{
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+                local_irq_save(flags);
+
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 2;
+		/*
+		 * send register register data
+		 */
+		i2c_outbyte(theValue);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 4;
+		/*
+		 * end byte stream
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	i2c_delay(CLOCK_LOW_TIME);
+
+	return -error;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_readreg
+*#
+*# DESCRIPTION  : Reads a value from the decoder registers.
+*#
+*#--------------------------------------------------------------------------*/
+unsigned char
+i2c_readreg(unsigned char theSlave, unsigned char theReg)
+{
+	unsigned char b = 0;
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+                local_irq_save(flags);
+		/*
+		 * generate start condition
+		 */
+		i2c_start();
+
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * repeat start condition
+		 */
+		i2c_delay(CLOCK_LOW_TIME);
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte(theSlave | 0x01);
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * fetch register
+		 */
+		b = i2c_inbyte();
+		/*
+		 * last received byte needs to be nacked
+		 * instead of acked
+		 */
+		i2c_sendnack();
+		/*
+		 * end sequence
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	return b;
+}
+
+static int
+i2c_open(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static int
+i2c_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+/* Main device API. ioctl's to write or read to/from i2c registers.
+ */
+
+static int
+i2c_ioctl(struct inode *inode, struct file *file,
+	  unsigned int cmd, unsigned long arg)
+{
+	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+		case I2C_WRITEREG:
+			/* write to an i2c slave */
+			D(printk("i2cw %d %d %d\n",
+				 I2C_ARGSLAVE(arg),
+				 I2C_ARGREG(arg),
+				 I2C_ARGVALUE(arg)));
+
+			return i2c_writereg(I2C_ARGSLAVE(arg),
+					    I2C_ARGREG(arg),
+					    I2C_ARGVALUE(arg));
+		case I2C_READREG:
+		{
+			unsigned char val;
+			/* read from an i2c slave */
+			D(printk("i2cr %d %d ",
+				I2C_ARGSLAVE(arg),
+				I2C_ARGREG(arg)));
+			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			D(printk("= %d\n", val));
+			return val;
+		}
+		default:
+			return -EINVAL;
+
+	}
+
+	return 0;
+}
+
+static struct file_operations i2c_fops = {
+	owner:    THIS_MODULE,
+	ioctl:    i2c_ioctl,
+	open:     i2c_open,
+	release:  i2c_release,
+};
+
+int __init
+i2c_init(void)
+{
+	int res;
+
+	/* Setup and enable the Port B I2C interface */
+
+        crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT);
+        crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT);
+
+	/* register char device */
+
+	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
+	if(res < 0) {
+		printk(KERN_ERR "i2c: couldn't get a major number.\n");
+		return res;
+	}
+
+	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+
+	return 0;
+}
+
+/* this makes sure that i2c_init is called during boot */
+
+module_init(i2c_init);
+
+/****************** END OF FILE i2c.c ********************************/
diff --git a/arch/cris/arch-v32/drivers/i2c.h b/arch/cris/arch-v32/drivers/i2c.h
new file mode 100644
index 000000000000..bfe1a13f9f35
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/i2c.h
@@ -0,0 +1,15 @@
+
+#include <linux/init.h>
+
+/* High level I2C actions */
+int __init i2c_init(void);
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+void i2c_start(void);
+void i2c_stop(void);
+void i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
diff --git a/arch/cris/arch-v32/drivers/iop_fw_load.c b/arch/cris/arch-v32/drivers/iop_fw_load.c
new file mode 100644
index 000000000000..11f9895ded50
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/iop_fw_load.c
@@ -0,0 +1,219 @@
+/* $Id: iop_fw_load.c,v 1.4 2005/04/07 09:27:46 larsv Exp $
+ *
+ * Firmware loader for ETRAX FS IO-Processor
+ *
+ * Copyright (C) 2004  Axis Communications AB
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/iop/iop_reg_space.h>
+#include <asm/arch/hwregs/iop/iop_mpu_macros.h>
+#include <asm/arch/hwregs/iop/iop_mpu_defs.h>
+#include <asm/arch/hwregs/iop/iop_spu_defs.h>
+#include <asm/arch/hwregs/iop/iop_sw_cpu_defs.h>
+
+#define IOP_TIMEOUT 100
+
+static struct device iop_spu_device[2] = {
+	{ .bus_id =     "iop-spu0", },
+	{ .bus_id =     "iop-spu1", },
+};
+
+static struct device iop_mpu_device = {
+	.bus_id =       "iop-mpu",
+};
+
+static int wait_mpu_idle(void)
+{
+	reg_iop_mpu_r_stat mpu_stat;
+	unsigned int timeout = IOP_TIMEOUT;
+
+	do {
+		mpu_stat = REG_RD(iop_mpu, regi_iop_mpu, r_stat);
+	} while (mpu_stat.instr_reg_busy == regk_iop_mpu_yes && --timeout > 0);
+	if (timeout == 0) {
+		printk(KERN_ERR "Timeout waiting for MPU to be idle\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int iop_fw_load_spu(const unsigned char *fw_name, unsigned int spu_inst)
+{
+	reg_iop_sw_cpu_rw_mc_ctrl mc_ctrl = {
+		.wr_spu0_mem =    regk_iop_sw_cpu_no,
+		.wr_spu1_mem =    regk_iop_sw_cpu_no,
+		.size =           4,
+		.cmd =            regk_iop_sw_cpu_reg_copy,
+		.keep_owner =     regk_iop_sw_cpu_yes
+	};
+	reg_iop_spu_rw_ctrl spu_ctrl = {
+		.en  =            regk_iop_spu_no,
+		.fsm =            regk_iop_spu_no,
+	};
+	reg_iop_sw_cpu_r_mc_stat mc_stat;
+        const struct firmware *fw_entry;
+	u32 *data;
+	unsigned int timeout;
+	int retval, i;
+
+	if (spu_inst > 1)
+		return -ENODEV;
+
+	/* get firmware */
+	retval = request_firmware(&fw_entry,
+				  fw_name,
+				  &iop_spu_device[spu_inst]);
+	if (retval != 0)
+	{
+		printk(KERN_ERR
+		       "iop_load_spu: Failed to load firmware \"%s\"\n",
+		       fw_name);
+		return retval;
+	}
+	data = (u32 *) fw_entry->data;
+
+	/* acquire ownership of memory controller */
+	switch (spu_inst) {
+	case 0:
+		mc_ctrl.wr_spu0_mem = regk_iop_sw_cpu_yes;
+		REG_WR(iop_spu, regi_iop_spu0, rw_ctrl, spu_ctrl);
+		break;
+	case 1:
+		mc_ctrl.wr_spu1_mem = regk_iop_sw_cpu_yes;
+		REG_WR(iop_spu, regi_iop_spu1, rw_ctrl, spu_ctrl);
+		break;
+	}
+	timeout = IOP_TIMEOUT;
+	do {
+		REG_WR(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_ctrl, mc_ctrl);
+		mc_stat = REG_RD(iop_sw_cpu, regi_iop_sw_cpu, r_mc_stat);
+	} while (mc_stat.owned_by_cpu == regk_iop_sw_cpu_no && --timeout > 0);
+	if (timeout == 0) {
+		printk(KERN_ERR "Timeout waiting to acquire MC\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* write to SPU memory */
+	for (i = 0; i < (fw_entry->size/4); i++) {
+		switch (spu_inst) {
+		case 0:
+			REG_WR_INT(iop_spu, regi_iop_spu0, rw_seq_pc, (i*4));
+			break;
+		case 1:
+			REG_WR_INT(iop_spu, regi_iop_spu1, rw_seq_pc, (i*4));
+			break;
+		}
+		REG_WR_INT(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_data, *data);
+		data++;
+	}
+
+	/* release ownership of memory controller */
+	(void) REG_RD(iop_sw_cpu, regi_iop_sw_cpu, rs_mc_data);
+
+ out:
+	release_firmware(fw_entry);
+	return retval;
+}
+
+int iop_fw_load_mpu(unsigned char *fw_name)
+{
+	const unsigned int start_addr = 0;
+	reg_iop_mpu_rw_ctrl mpu_ctrl;
+        const struct firmware *fw_entry;
+	u32 *data;
+	int retval, i;
+
+	/* get firmware */
+	retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device);
+	if (retval != 0)
+	{
+		printk(KERN_ERR
+		       "iop_load_spu: Failed to load firmware \"%s\"\n",
+		       fw_name);
+		return retval;
+	}
+	data = (u32 *) fw_entry->data;
+
+	/* disable MPU */
+	mpu_ctrl.en = regk_iop_mpu_no;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl);
+	/* put start address in R0 */
+	REG_WR_VECT(iop_mpu, regi_iop_mpu, rw_r, 0, start_addr);
+	/* write to memory by executing 'SWX i, 4, R0' for each word */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_SWX_IIR_INSTR(0, 4, 0));
+	for (i = 0; i < (fw_entry->size / 4); i++) {
+		REG_WR_INT(iop_mpu, regi_iop_mpu, rw_immediate, *data);
+		if ((retval = wait_mpu_idle()) != 0)
+			goto out;
+		data++;
+	}
+
+ out:
+	release_firmware(fw_entry);
+	return retval;
+}
+
+int iop_start_mpu(unsigned int start_addr)
+{
+	reg_iop_mpu_rw_ctrl mpu_ctrl = { .en = regk_iop_mpu_yes };
+	int retval;
+
+	/* disable MPU */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_HALT());
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* set PC and wait for it to bite */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR_INT(iop_mpu, regi_iop_mpu, rw_instr, MPU_BA_I(start_addr));
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* make sure the MPU starts executing with interrupts disabled */
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_DI());
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* enable MPU */
+	REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl);
+ out:
+	return retval;
+}
+
+static int __init iop_fw_load_init(void)
+{
+	device_initialize(&iop_spu_device[0]);
+	kobject_set_name(&iop_spu_device[0].kobj, "iop-spu0");
+	kobject_add(&iop_spu_device[0].kobj);
+	device_initialize(&iop_spu_device[1]);
+	kobject_set_name(&iop_spu_device[1].kobj, "iop-spu1");
+	kobject_add(&iop_spu_device[1].kobj);
+	device_initialize(&iop_mpu_device);
+	kobject_set_name(&iop_mpu_device.kobj, "iop-mpu");
+	kobject_add(&iop_mpu_device.kobj);
+	return 0;
+}
+
+static void __exit iop_fw_load_exit(void)
+{
+}
+
+module_init(iop_fw_load_init);
+module_exit(iop_fw_load_exit);
+
+MODULE_DESCRIPTION("ETRAX FS IO-Processor Firmware Loader");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(iop_fw_load_spu);
+EXPORT_SYMBOL(iop_fw_load_mpu);
+EXPORT_SYMBOL(iop_start_mpu);
diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c
new file mode 100644
index 000000000000..fc2a619b035d
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/nandflash.c
@@ -0,0 +1,157 @@
+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2004
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ * 	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/arch/memmap.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/bif_core_defs.h>
+#include <asm/io.h>
+
+#define CE_BIT 4
+#define CLE_BIT 5
+#define ALE_BIT 6
+#define BY_BIT 7
+
+static struct mtd_info *crisv32_mtd = NULL;
+/*
+ *	hardware specific access to control-lines
+*/
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	unsigned long flags;
+	reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout);
+
+	local_irq_save(flags);
+	switch(cmd){
+		case NAND_CTL_SETCLE:
+		     dout.data |= (1<<CLE_BIT);
+		     break;
+		case NAND_CTL_CLRCLE:
+		     dout.data &= ~(1<<CLE_BIT);
+		     break;
+		case NAND_CTL_SETALE:
+		     dout.data |= (1<<ALE_BIT);
+		     break;
+		case NAND_CTL_CLRALE:
+		     dout.data &= ~(1<<ALE_BIT);
+		     break;
+		case NAND_CTL_SETNCE:
+		     dout.data |= (1<<CE_BIT);
+		     break;
+		case NAND_CTL_CLRNCE:
+		     dout.data &= ~(1<<CE_BIT);
+		     break;
+	}
+	REG_WR(gio, regi_gio, rw_pa_dout, dout);
+	local_irq_restore(flags);
+}
+
+/*
+*	read device ready pin
+*/
+int crisv32_device_ready(struct mtd_info *mtd)
+{
+	reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din);
+	return ((din.data & (1 << BY_BIT)) >> BY_BIT);
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info* __init crisv32_nand_flash_probe (void)
+{
+	void __iomem *read_cs;
+	void __iomem *write_cs;
+
+	reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg);
+	reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe);
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	crisv32_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!crisv32_mtd) {
+		printk ("Unable to allocate CRISv32 NAND MTD device structure.\n");
+		err = -ENOMEM;
+		return NULL;
+	}
+
+	read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192);
+	write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192);
+
+	if (!read_cs || !write_cs) {
+		printk("CRISv32 NAND ioremap failed\n");
+		err = -EIO;
+		goto out_mtd;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&crisv32_mtd[1]);
+
+	pa_oe.oe |= 1 << CE_BIT;
+	pa_oe.oe |= 1 << ALE_BIT;
+	pa_oe.oe |= 1 << CLE_BIT;
+	pa_oe.oe &= ~ (1 << BY_BIT);
+	REG_WR(gio, regi_gio, rw_pa_oe, pa_oe);
+
+	bif_cfg.gated_csp0 = regk_bif_core_rd;
+	bif_cfg.gated_csp1 = regk_bif_core_wr;
+	REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
+
+	/* Initialize structures */
+	memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	crisv32_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = read_cs;
+	this->IO_ADDR_W = write_cs;
+	this->hwcontrol = crisv32_hwcontrol;
+	this->dev_ready = crisv32_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	this->options = NAND_USE_FLASH_BBT;
+
+	/* Scan to find existance of the device */
+	if (nand_scan (crisv32_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+
+	return crisv32_mtd;
+
+out_ior:
+	iounmap((void *)read_cs);
+	iounmap((void *)write_cs);
+out_mtd:
+	kfree (crisv32_mtd);
+        return NULL;
+}
+
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
new file mode 100644
index 000000000000..f894580b648b
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -0,0 +1,341 @@
+/*
+ * PCF8563 RTC
+ *
+ * From Phillips' datasheet:
+ *
+ * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
+ * consumption. A programmable clock output, interupt output and voltage
+ * low detector are also provided. All address and data are transferred
+ * serially via two-line bidirectional I2C-bus. Maximum bus speed is
+ * 400 kbits/s. The built-in word address register is incremented
+ * automatically after each written or read byte.
+ *
+ * Copyright (c) 2002-2003, Axis Communications AB
+ * All rights reserved.
+ *
+ * Author: Tobias Anderberg <tobiasa@axis.com>.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+
+#include "i2c.h"
+
+#define PCF8563_MAJOR	121	/* Local major number. */
+#define DEVICE_NAME	"rtc"	/* Name which is registered in /proc/devices. */
+#define PCF8563_NAME	"PCF8563"
+#define DRIVER_VERSION	"$Revision: 1.1 $"
+
+/* Two simple wrapper macros, saves a few keystrokes. */
+#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
+#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
+
+static const unsigned char days_in_month[] =
+	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+int pcf8563_open(struct inode *, struct file *);
+int pcf8563_release(struct inode *, struct file *);
+
+static struct file_operations pcf8563_fops = {
+	owner: THIS_MODULE,
+	ioctl: pcf8563_ioctl,
+	open: pcf8563_open,
+	release: pcf8563_release,
+};
+
+unsigned char
+pcf8563_readreg(int reg)
+{
+	unsigned char res = rtc_read(reg);
+
+	/* The PCF8563 does not return 0 for unimplemented bits */
+	switch (reg) {
+		case RTC_SECONDS:
+		case RTC_MINUTES:
+			res &= 0x7F;
+			break;
+		case RTC_HOURS:
+		case RTC_DAY_OF_MONTH:
+			res &= 0x3F;
+			break;
+		case RTC_WEEKDAY:
+			res &= 0x07;
+			break;
+		case RTC_MONTH:
+			res &= 0x1F;
+			break;
+		case RTC_CONTROL1:
+			res &= 0xA8;
+			break;
+		case RTC_CONTROL2:
+			res &= 0x1F;
+			break;
+		case RTC_CLOCKOUT_FREQ:
+		case RTC_TIMER_CONTROL:
+			res &= 0x83;
+			break;
+	}
+	return res;
+}
+
+void
+pcf8563_writereg(int reg, unsigned char val)
+{
+#ifdef CONFIG_ETRAX_RTC_READONLY
+	if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
+		return;
+#endif
+
+	rtc_write(reg, val);
+}
+
+void
+get_rtc_time(struct rtc_time *tm)
+{
+	tm->tm_sec  = rtc_read(RTC_SECONDS);
+	tm->tm_min  = rtc_read(RTC_MINUTES);
+	tm->tm_hour = rtc_read(RTC_HOURS);
+	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
+	tm->tm_wday = rtc_read(RTC_WEEKDAY);
+	tm->tm_mon  = rtc_read(RTC_MONTH);
+	tm->tm_year = rtc_read(RTC_YEAR);
+
+	if (tm->tm_sec & 0x80)
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+
+	tm->tm_year  = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
+	tm->tm_sec  &= 0x7F;
+	tm->tm_min  &= 0x7F;
+	tm->tm_hour &= 0x3F;
+	tm->tm_mday &= 0x3F;
+	tm->tm_wday &= 0x07; /* Not coded in BCD. */
+	tm->tm_mon  &= 0x1F;
+
+	BCD_TO_BIN(tm->tm_sec);
+	BCD_TO_BIN(tm->tm_min);
+	BCD_TO_BIN(tm->tm_hour);
+	BCD_TO_BIN(tm->tm_mday);
+	BCD_TO_BIN(tm->tm_mon);
+	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
+}
+
+int __init
+pcf8563_init(void)
+{
+	/* Initiate the i2c protocol. */
+	i2c_init();
+
+	/*
+	 * First of all we need to reset the chip. This is done by
+	 * clearing control1, control2 and clk freq and resetting
+	 * all alarms.
+	 */
+	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_CONTROL2, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
+		goto err;
+
+	/* Reset the alarms. */
+	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
+		goto err;
+
+	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
+		printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
+		       PCF8563_NAME, PCF8563_MAJOR);
+		return -1;
+	}
+
+	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
+
+	/* Check for low voltage, and warn about it.. */
+	if (rtc_read(RTC_SECONDS) & 0x80)
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+
+	return 0;
+
+err:
+	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
+	return -1;
+}
+
+void __exit
+pcf8563_exit(void)
+{
+	if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
+		printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
+	}
+}
+
+/*
+ * ioctl calls for this driver. Why return -ENOTTY upon error? Because
+ * POSIX says so!
+ */
+int
+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	/* Some sanity checks. */
+	if (_IOC_TYPE(cmd) != RTC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
+		return -ENOTTY;
+
+	switch (cmd) {
+		case RTC_RD_TIME:
+		{
+			struct rtc_time tm;
+
+			memset(&tm, 0, sizeof (struct rtc_time));
+			get_rtc_time(&tm);
+
+			if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) {
+				return -EFAULT;
+			}
+
+			return 0;
+		}
+
+		case RTC_SET_TIME:
+		{
+#ifdef CONFIG_ETRAX_RTC_READONLY
+			return -EPERM;
+#else
+			int leap;
+			int year;
+			int century;
+			struct rtc_time tm;
+
+			if (!capable(CAP_SYS_TIME))
+				return -EPERM;
+
+			if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
+				return -EFAULT;
+
+			/* Convert from struct tm to struct rtc_time. */
+			tm.tm_year += 1900;
+			tm.tm_mon += 1;
+
+			/*
+			 * Check if tm.tm_year is a leap year. A year is a leap
+			 * year if it is divisible by 4 but not 100, except
+			 * that years divisible by 400 _are_ leap years.
+			 */
+			year = tm.tm_year;
+			leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
+
+			/* Perform some sanity checks. */
+			if ((tm.tm_year < 1970) ||
+			    (tm.tm_mon > 12) ||
+			    (tm.tm_mday == 0) ||
+			    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
+			    (tm.tm_wday >= 7) ||
+			    (tm.tm_hour >= 24) ||
+			    (tm.tm_min >= 60) ||
+			    (tm.tm_sec >= 60))
+				return -EINVAL;
+
+			century = (tm.tm_year >= 2000) ? 0x80 : 0;
+			tm.tm_year = tm.tm_year % 100;
+
+			BIN_TO_BCD(tm.tm_year);
+			BIN_TO_BCD(tm.tm_mday);
+			BIN_TO_BCD(tm.tm_hour);
+			BIN_TO_BCD(tm.tm_min);
+			BIN_TO_BCD(tm.tm_sec);
+			tm.tm_mon |= century;
+
+			rtc_write(RTC_YEAR, tm.tm_year);
+			rtc_write(RTC_MONTH, tm.tm_mon);
+			rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
+			rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
+			rtc_write(RTC_HOURS, tm.tm_hour);
+			rtc_write(RTC_MINUTES, tm.tm_min);
+			rtc_write(RTC_SECONDS, tm.tm_sec);
+
+			return 0;
+#endif /* !CONFIG_ETRAX_RTC_READONLY */
+		}
+
+		case RTC_VLOW_RD:
+		{
+			int vl_bit = 0;
+
+			if (rtc_read(RTC_SECONDS) & 0x80) {
+				vl_bit = 1;
+				printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
+				       "date/time information is no longer guaranteed!\n",
+				       PCF8563_NAME);
+			}
+			if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
+				return -EFAULT;
+
+			return 0;
+		}
+
+		case RTC_VLOW_SET:
+		{
+			/* Clear the VL bit in the seconds register */
+			int ret = rtc_read(RTC_SECONDS);
+
+			rtc_write(RTC_SECONDS, (ret & 0x7F));
+
+			return 0;
+		}
+
+		default:
+			return -ENOTTY;
+	}
+
+	return 0;
+}
+
+int
+pcf8563_open(struct inode *inode, struct file *filp)
+{
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+int
+pcf8563_release(struct inode *inode, struct file *filp)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+module_init(pcf8563_init);
+module_exit(pcf8563_exit);
diff --git a/arch/cris/arch-v32/drivers/pci/Makefile b/arch/cris/arch-v32/drivers/pci/Makefile
new file mode 100644
index 000000000000..bff7482f2444
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/pci/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Etrax cardbus driver
+#
+
+obj-$(CONFIG_ETRAX_CARDBUS)        += bios.o dma.o
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
new file mode 100644
index 000000000000..24bc149889b6
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -0,0 +1,131 @@
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/arch/hwregs/intr_vect.h>
+
+void __devinit  pcibios_fixup_bus(struct pci_bus *b)
+{
+}
+
+char * __devinit  pcibios_setup(char *str)
+{
+	return NULL;
+}
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long prot;
+
+	/* Leave vm_pgoff as-is, the PCI space address is the physical
+	 * address on this platform.
+	 */
+	vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO);
+
+	prot = pgprot_val(vma->vm_page_prot);
+	vma->vm_page_prot = __pgprot(prot);
+
+	/* Write-combine setting is ignored, it is changed via the mtrr
+	 * interfaces on this platform.
+	 */
+	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			     vma->vm_end - vma->vm_start,
+			     vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+void
+pcibios_align_resource(void *data, struct resource *res,
+		       unsigned long size, unsigned long align)
+{
+	if (res->flags & IORESOURCE_IO) {
+		unsigned long start = res->start;
+
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for(idx=0; idx<6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<idx)))
+			continue;
+
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int pcibios_enable_irq(struct pci_dev *dev)
+{
+	dev->irq = EXT_INTR_VECT;
+	return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+		return err;
+
+	return pcibios_enable_irq(dev);
+}
+
+int pcibios_assign_resources(void)
+{
+	struct pci_dev *dev = NULL;
+	int idx;
+	struct resource *r;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int class = dev->class >> 8;
+
+		/* Don't touch classless devices and host bridges */
+		if (!class || class == PCI_CLASS_BRIDGE_HOST)
+			continue;
+
+		for(idx=0; idx<6; idx++) {
+			r = &dev->resource[idx];
+
+			if (!r->start && r->end)
+				pci_assign_resource(dev, idx);
+		}
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(pcibios_assign_resources);
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
new file mode 100644
index 000000000000..10329306d23c
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -0,0 +1,149 @@
+/*
+ * Dynamic DMA mapping support.
+ *
+ * On cris there is no hardware dynamic DMA address translation,
+ * so consistent alloc/free are merely page allocation/freeing.
+ * The rest of the dynamic DMA mapping interface is implemented
+ * in asm/pci.h.
+ *
+ * Borrowed from i386.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+struct dma_coherent_mem {
+	void		*virt_base;
+	u32		device_base;
+	int		size;
+	int		flags;
+	unsigned long	*bitmap;
+};
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+{
+	void *ret;
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (mem) {
+		int page = bitmap_find_free_region(mem->bitmap, mem->size,
+						     order);
+		if (page >= 0) {
+			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
+			ret = mem->virt_base + (page << PAGE_SHIFT);
+			memset(ret, 0, size);
+			return ret;
+		}
+		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+			return NULL;
+	}
+
+	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, order);
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_phys(ret);
+	}
+	return ret;
+}
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+
+	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+		bitmap_release_region(mem->bitmap, page, order);
+	} else
+		free_pages((unsigned long)vaddr, order);
+}
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+				dma_addr_t device_addr, size_t size, int flags)
+{
+	void __iomem *mem_base;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = (pages + 31)/32;
+
+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+		goto out;
+	if (!size)
+		goto out;
+	if (dev->dma_mem)
+		goto out;
+
+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+	mem_base = ioremap(bus_addr, size);
+	if (!mem_base)
+		goto out;
+
+	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+	if (!dev->dma_mem)
+		goto out;
+	memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem));
+	dev->dma_mem->bitmap = kmalloc(bitmap_size, GFP_KERNEL);
+	if (!dev->dma_mem->bitmap)
+		goto free1_out;
+	memset(dev->dma_mem->bitmap, 0, bitmap_size);
+
+	dev->dma_mem->virt_base = mem_base;
+	dev->dma_mem->device_base = device_addr;
+	dev->dma_mem->size = pages;
+	dev->dma_mem->flags = flags;
+
+	if (flags & DMA_MEMORY_MAP)
+		return DMA_MEMORY_MAP;
+
+	return DMA_MEMORY_IO;
+
+ free1_out:
+	kfree(dev->dma_mem->bitmap);
+ out:
+	return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+
+	if(!mem)
+		return;
+	dev->dma_mem = NULL;
+	iounmap(mem->virt_base);
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	int pos, err;
+
+	if (!mem)
+		return ERR_PTR(-EINVAL);
+
+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+	if (err != 0)
+		return ERR_PTR(err);
+	return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
new file mode 100644
index 000000000000..c85a6df8558f
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -0,0 +1,1283 @@
+/*
+ * Simple synchronous serial port driver for ETRAX FS.
+ *
+ * Copyright (c) 2005 Axis Communications AB
+ *
+ * Author: Mikael Starvik
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/sser_defs.h>
+#include <asm/arch/hwregs/dma_defs.h>
+#include <asm/arch/hwregs/dma.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/sync_serial.h>
+
+/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/*                                                                       */
+/* Three DMA descriptors are linked together. Each DMA descriptor is     */
+/* responsible for port->bufchunk of a common buffer.                    */
+/*                                                                       */
+/* +---------------------------------------------+                       */
+/* |   +----------+   +----------+   +----------+ |                      */
+/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+                      */
+/*     +----------+   +----------+   +----------+                        */
+/*         |            |              |                                 */
+/*         v            v              v                                 */
+/*   +-------------------------------------+                             */
+/*   |        BUFFER                       |                             */
+/*   +-------------------------------------+                             */
+/*      |<- data_avail ->|                                               */
+/*    readp          writep                                              */
+/*                                                                       */
+/* If the application keeps up the pace readp will be right after writep.*/
+/* If the application can't keep the pace we have to throw away data.    */
+/* The idea is that readp should be ready with the data pointed out by	 */
+/* Descr[i] when the DMA has filled in Descr[i+1].                       */
+/* Otherwise we will discard	                                         */
+/* the rest of the data pointed out by Descr1 and set readp to the start */
+/* of Descr2                                                             */
+
+#define SYNC_SERIAL_MAJOR 125
+
+/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
+/* words can be handled */
+#define IN_BUFFER_SIZE 12288
+#define IN_DESCR_SIZE 256
+#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
+#define OUT_BUFFER_SIZE 4096
+
+#define DEFAULT_FRAME_RATE 0
+#define DEFAULT_WORD_RATE 7
+
+/* NOTE: Enabling some debug will likely cause overrun or underrun,
+ * especially if manual mode is use.
+ */
+#define DEBUG(x)
+#define DEBUGREAD(x)
+#define DEBUGWRITE(x)
+#define DEBUGPOLL(x)
+#define DEBUGRXINT(x)
+#define DEBUGTXINT(x)
+
+typedef struct sync_port
+{
+	reg_scope_instances regi_sser;
+	reg_scope_instances regi_dmain;
+	reg_scope_instances regi_dmaout;
+
+	char started; /* 1 if port has been started */
+	char port_nbr; /* Port 0 or 1 */
+	char busy; /* 1 if port is busy */
+
+	char enabled;  /* 1 if port is enabled */
+	char use_dma;  /* 1 if port uses dma */
+	char tr_running;
+
+	char init_irqs;
+	int output;
+	int input;
+
+	volatile unsigned int out_count; /* Remaining bytes for current transfer */
+	unsigned char* outp; /* Current position in out_buffer */
+	volatile unsigned char* volatile readp;  /* Next byte to be read by application */
+	volatile unsigned char* volatile writep; /* Next byte to be written by etrax */
+	unsigned int in_buffer_size;
+	unsigned int inbufchunk;
+	unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
+	unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
+	struct dma_descr_data* next_rx_desc;
+	struct dma_descr_data* prev_rx_desc;
+	int full;
+
+	dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16)));
+	dma_descr_context in_context __attribute__ ((__aligned__(32)));
+	dma_descr_data out_descr __attribute__ ((__aligned__(16)));
+	dma_descr_context out_context __attribute__ ((__aligned__(32)));
+	wait_queue_head_t out_wait_q;
+	wait_queue_head_t in_wait_q;
+
+	spinlock_t lock;
+} sync_port;
+
+static int etrax_sync_serial_init(void);
+static void initialize_port(int portnbr);
+static inline int sync_data_avail(struct sync_port *port);
+
+static int sync_serial_open(struct inode *, struct file*);
+static int sync_serial_release(struct inode*, struct file*);
+static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
+
+static int sync_serial_ioctl(struct inode*, struct file*,
+			     unsigned int cmd, unsigned long arg);
+static ssize_t sync_serial_write(struct file * file, const char * buf,
+				 size_t count, loff_t *ppos);
+static ssize_t sync_serial_read(struct file *file, char *buf,
+				size_t count, loff_t *ppos);
+
+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
+#define SYNC_SER_DMA
+#endif
+
+static void send_word(sync_port* port);
+static void start_dma(struct sync_port *port, const char* data, int count);
+static void start_dma_in(sync_port* port);
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+#endif
+
+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
+    (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
+     !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
+#define SYNC_SER_MANUAL
+#endif
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs);
+#endif
+
+/* The ports */
+static struct sync_port ports[]=
+{
+	{
+		.regi_sser             = regi_sser0,
+		.regi_dmaout           = regi_dma4,
+		.regi_dmain            = regi_dma5,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
+                .use_dma               = 1,
+#else
+                .use_dma               = 0,
+#endif
+	},
+	{
+		.regi_sser             = regi_sser1,
+		.regi_dmaout           = regi_dma6,
+		.regi_dmain            = regi_dma7,
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
+                .use_dma               = 1,
+#else
+                .use_dma               = 0,
+#endif
+	}
+};
+
+#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port))
+
+static struct file_operations sync_serial_fops = {
+	.owner   = THIS_MODULE,
+	.write   = sync_serial_write,
+	.read    = sync_serial_read,
+	.poll    = sync_serial_poll,
+	.ioctl   = sync_serial_ioctl,
+	.open    = sync_serial_open,
+	.release = sync_serial_release
+};
+
+static int __init etrax_sync_serial_init(void)
+{
+	ports[0].enabled = 0;
+	ports[1].enabled = 0;
+
+	if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 )
+	{
+		printk("unable to get major for synchronous serial port\n");
+		return -EBUSY;
+	}
+
+	/* Initialize Ports */
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
+	if (crisv32_pinmux_alloc_fixed(pinmux_sser0))
+	{
+		printk("Unable to allocate pins for syncrhronous serial port 0\n");
+		return -EIO;
+	}
+	ports[0].enabled = 1;
+	initialize_port(0);
+#endif
+
+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+	if (crisv32_pinmux_alloc_fixed(pinmux_sser1))
+	{
+		printk("Unable to allocate pins for syncrhronous serial port 0\n");
+		return -EIO;
+	}
+	ports[1].enabled = 1;
+	initialize_port(1);
+#endif
+
+	printk("ETRAX FS synchronous serial port driver\n");
+	return 0;
+}
+
+static void __init initialize_port(int portnbr)
+{
+	struct sync_port* port = &ports[portnbr];
+	reg_sser_rw_cfg cfg = {0};
+	reg_sser_rw_frm_cfg frm_cfg = {0};
+	reg_sser_rw_tr_cfg tr_cfg = {0};
+	reg_sser_rw_rec_cfg rec_cfg = {0};
+
+	DEBUG(printk("Init sync serial port %d\n", portnbr));
+
+	port->port_nbr = portnbr;
+	port->init_irqs = 1;
+
+	port->outp = port->out_buffer;
+	port->output = 1;
+	port->input = 0;
+
+	port->readp = port->flip;
+	port->writep = port->flip;
+	port->in_buffer_size = IN_BUFFER_SIZE;
+	port->inbufchunk = IN_DESCR_SIZE;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
+	port->prev_rx_desc->eol = 1;
+
+	init_waitqueue_head(&port->out_wait_q);
+	init_waitqueue_head(&port->in_wait_q);
+
+	spin_lock_init(&port->lock);
+
+	cfg.out_clk_src = regk_sser_intern_clk;
+	cfg.out_clk_pol = regk_sser_pos;
+	cfg.clk_od_mode = regk_sser_no;
+	cfg.clk_dir = regk_sser_out;
+	cfg.gate_clk = regk_sser_no;
+	cfg.base_freq = regk_sser_f29_493;
+	cfg.clk_div = 256;
+	REG_WR(sser, port->regi_sser, rw_cfg, cfg);
+
+	frm_cfg.wordrate = DEFAULT_WORD_RATE;
+	frm_cfg.type = regk_sser_edge;
+	frm_cfg.frame_pin_dir = regk_sser_out;
+	frm_cfg.frame_pin_use = regk_sser_frm;
+	frm_cfg.status_pin_dir = regk_sser_in;
+	frm_cfg.status_pin_use = regk_sser_hold;
+	frm_cfg.out_on = regk_sser_tr;
+	frm_cfg.tr_delay = 1;
+	REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg);
+
+	tr_cfg.urun_stop = regk_sser_no;
+	tr_cfg.sample_size = 7;
+	tr_cfg.sh_dir = regk_sser_msbfirst;
+	tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
+	tr_cfg.rate_ctrl = regk_sser_bulk;
+	tr_cfg.data_pin_use = regk_sser_dout;
+	tr_cfg.bulk_wspace = 1;
+	REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
+
+	rec_cfg.sample_size = 7;
+	rec_cfg.sh_dir = regk_sser_msbfirst;
+	rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
+	rec_cfg.fifo_thr = regk_sser_inf;
+	REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
+}
+
+static inline int sync_data_avail(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char*)port->readp; /* cast away volatile */
+	end = (unsigned char*)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----      -    -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+
+  	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->in_buffer_size - (start - end);
+	return avail;
+}
+
+static inline int sync_data_avail_to_end(struct sync_port *port)
+{
+	int avail;
+	unsigned char *start;
+	unsigned char *end;
+
+	start = (unsigned char*)port->readp; /* cast away volatile */
+	end = (unsigned char*)port->writep;  /* cast away volatile */
+	/* 0123456789  0123456789
+	 *  -----           -----
+	 *  ^rp  ^wp    ^wp ^rp
+	 */
+
+  	if (end >= start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+	return avail;
+}
+
+static int sync_serial_open(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	sync_port* port;
+	reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
+	reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
+
+	DEBUG(printk("Open sync serial port %d\n", dev));
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
+	{
+		DEBUG(printk("Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+	/* Allow open this device twice (assuming one reader and one writer) */
+	if (port->busy == 2)
+	{
+		DEBUG(printk("Device is busy.. \n"));
+		return -EBUSY;
+	}
+	if (port->init_irqs) {
+		if (port->use_dma) {
+			if (port == &ports[0]){
+#ifdef SYNC_SER_DMA
+				if(request_irq(DMA4_INTR_VECT,
+					       tr_interrupt,
+					       0,
+					       "synchronous serial 0 dma tr",
+					       &ports[0])) {
+					printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
+					return -EBUSY;
+				} else if(request_irq(DMA5_INTR_VECT,
+						      rx_interrupt,
+						      0,
+						      "synchronous serial 1 dma rx",
+						      &ports[0])) {
+					free_irq(DMA4_INTR_VECT, &port[0]);
+					printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
+					return -EBUSY;
+				} else if (crisv32_request_dma(SYNC_SER0_TX_DMA_NBR,
+                                                               "synchronous serial 0 dma tr",
+                                                               DMA_VERBOSE_ON_ERROR,
+                                                               0,
+                                                               dma_sser0)) {
+					free_irq(DMA4_INTR_VECT, &port[0]);
+					free_irq(DMA5_INTR_VECT, &port[0]);
+					printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel");
+					return -EBUSY;
+				} else if (crisv32_request_dma(SYNC_SER0_RX_DMA_NBR,
+                                                               "synchronous serial 0 dma rec",
+                                                               DMA_VERBOSE_ON_ERROR,
+                                                               0,
+                                                               dma_sser0)) {
+					crisv32_free_dma(SYNC_SER0_TX_DMA_NBR);
+					free_irq(DMA4_INTR_VECT, &port[0]);
+					free_irq(DMA5_INTR_VECT, &port[0]);
+					printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel");
+					return -EBUSY;
+				}
+#endif
+			}
+			else if (port == &ports[1]){
+#ifdef SYNC_SER_DMA
+				if (request_irq(DMA6_INTR_VECT,
+						tr_interrupt,
+						0,
+						"synchronous serial 1 dma tr",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
+					return -EBUSY;
+				} else if (request_irq(DMA7_INTR_VECT,
+						       rx_interrupt,
+						       0,
+						       "synchronous serial 1 dma rx",
+						       &ports[1])) {
+					free_irq(DMA6_INTR_VECT, &ports[1]);
+					printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
+					return -EBUSY;
+				} else if (crisv32_request_dma(SYNC_SER1_TX_DMA_NBR,
+                                                               "synchronous serial 1 dma tr",
+                                                               DMA_VERBOSE_ON_ERROR,
+                                                               0,
+                                                               dma_sser1)) {
+					free_irq(21, &ports[1]);
+					free_irq(20, &ports[1]);
+					printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
+					return -EBUSY;
+				} else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR,
+							    "synchronous serial 3 dma rec",
+							    DMA_VERBOSE_ON_ERROR,
+							    0,
+							    dma_sser1)) {
+					crisv32_free_dma(SYNC_SER1_TX_DMA_NBR);
+					free_irq(DMA6_INTR_VECT, &ports[1]);
+					free_irq(DMA7_INTR_VECT, &ports[1]);
+					printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel");
+					return -EBUSY;
+				}
+#endif
+			}
+
+                        /* Enable DMAs */
+			REG_WR(dma, port->regi_dmain, rw_cfg, cfg);
+			REG_WR(dma, port->regi_dmaout, rw_cfg, cfg);
+			/* Enable DMA IRQs */
+			REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask);
+			REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask);
+			/* Set up wordsize = 2 for DMAs. */
+			DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1);
+			DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1);
+
+			start_dma_in(port);
+			port->init_irqs = 0;
+		} else { /* !port->use_dma */
+#ifdef SYNC_SER_MANUAL
+			if (port == &ports[0]) {
+				if (request_irq(SSER0_INTR_VECT,
+						manual_interrupt,
+						0,
+						"synchronous serial manual irq",
+						&ports[0])) {
+					printk("Can't allocate sync serial manual irq");
+					return -EBUSY;
+				}
+			} else if (port == &ports[1]) {
+				if (request_irq(SSER1_INTR_VECT,
+						manual_interrupt,
+						0,
+						"synchronous serial manual irq",
+						&ports[1])) {
+					printk(KERN_CRIT "Can't allocate sync serial manual irq");
+					return -EBUSY;
+				}
+			}
+			port->init_irqs = 0;
+#else
+			panic("sync_serial: Manual mode not supported.\n");
+#endif /* SYNC_SER_MANUAL */
+		}
+	} /* port->init_irqs */
+
+	port->busy++;
+	return 0;
+}
+
+static int sync_serial_release(struct inode *inode, struct file *file)
+{
+	int dev = MINOR(inode->i_rdev);
+	sync_port* port;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
+	{
+		DEBUG(printk("Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+	if (port->busy)
+		port->busy--;
+	if (!port->busy)
+          /* XXX */ ;
+	return 0;
+}
+
+static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	unsigned int mask = 0;
+	sync_port* port;
+	DEBUGPOLL( static unsigned int prev_mask = 0; );
+
+	port = &ports[dev];
+	poll_wait(file, &port->out_wait_q, wait);
+	poll_wait(file, &port->in_wait_q, wait);
+	/* Some room to write */
+	if (port->out_count < OUT_BUFFER_SIZE)
+		mask |=  POLLOUT | POLLWRNORM;
+	/* At least an inbufchunk of data */
+	if (sync_data_avail(port) >= port->inbufchunk)
+		mask |= POLLIN | POLLRDNORM;
+
+	DEBUGPOLL(if (mask != prev_mask)
+	      printk("sync_serial_poll: mask 0x%08X %s %s\n", mask,
+		     mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":"");
+	      prev_mask = mask;
+	      );
+	return mask;
+}
+
+static int sync_serial_ioctl(struct inode *inode, struct file *file,
+		  unsigned int cmd, unsigned long arg)
+{
+	int return_val = 0;
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	sync_port* port;
+	reg_sser_rw_tr_cfg tr_cfg;
+	reg_sser_rw_rec_cfg rec_cfg;
+	reg_sser_rw_frm_cfg frm_cfg;
+	reg_sser_rw_cfg gen_cfg;
+	reg_sser_rw_intr_mask intr_mask;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
+	{
+		DEBUG(printk("Invalid minor %d\n", dev));
+		return -1;
+	}
+        port = &ports[dev];
+	spin_lock_irq(&port->lock);
+
+	tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
+	rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
+	frm_cfg = REG_RD(sser, port->regi_sser, rw_frm_cfg);
+	gen_cfg = REG_RD(sser, port->regi_sser, rw_cfg);
+	intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
+
+	switch(cmd)
+	{
+	case SSP_SPEED:
+		if (GET_SPEED(arg) == CODEC)
+		{
+			gen_cfg.base_freq = regk_sser_f32;
+			/* FREQ = 0 => 4 MHz => clk_div = 7*/
+			gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg));
+		}
+		else
+		{
+			gen_cfg.base_freq = regk_sser_f29_493;
+			switch (GET_SPEED(arg))
+			{
+				case SSP150:
+					gen_cfg.clk_div = 29493000 / (150 * 8) - 1;
+					break;
+				case SSP300:
+					gen_cfg.clk_div = 29493000 / (300 * 8) - 1;
+					break;
+				case SSP600:
+					gen_cfg.clk_div = 29493000 / (600 * 8) - 1;
+					break;
+				case SSP1200:
+					gen_cfg.clk_div = 29493000 / (1200 * 8) - 1;
+					break;
+				case SSP2400:
+					gen_cfg.clk_div = 29493000 / (2400 * 8) - 1;
+					break;
+				case SSP4800:
+					gen_cfg.clk_div = 29493000 / (4800 * 8) - 1;
+					break;
+				case SSP9600:
+					gen_cfg.clk_div = 29493000 / (9600 * 8) - 1;
+					break;
+				case SSP19200:
+					gen_cfg.clk_div = 29493000 / (19200 * 8) - 1;
+					break;
+				case SSP28800:
+					gen_cfg.clk_div = 29493000 / (28800 * 8) - 1;
+					break;
+				case SSP57600:
+					gen_cfg.clk_div = 29493000 / (57600 * 8) - 1;
+					break;
+				case SSP115200:
+					gen_cfg.clk_div = 29493000 / (115200 * 8) - 1;
+					break;
+				case SSP230400:
+					gen_cfg.clk_div = 29493000 / (230400 * 8) - 1;
+					break;
+				case SSP460800:
+					gen_cfg.clk_div = 29493000 / (460800 * 8) - 1;
+					break;
+				case SSP921600:
+					gen_cfg.clk_div = 29493000 / (921600 * 8) - 1;
+					break;
+				case SSP3125000:
+					gen_cfg.base_freq = regk_sser_f100;
+					gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1;
+					break;
+
+			}
+		}
+		frm_cfg.wordrate = GET_WORD_RATE(arg);
+
+		break;
+	case SSP_MODE:
+		switch(arg)
+		{
+			case MASTER_OUTPUT:
+				port->output = 1;
+				port->input = 0;
+				gen_cfg.clk_dir = regk_sser_out;
+				break;
+			case SLAVE_OUTPUT:
+				port->output = 1;
+				port->input = 0;
+				gen_cfg.clk_dir = regk_sser_in;
+				break;
+			case MASTER_INPUT:
+				port->output = 0;
+				port->input = 1;
+				gen_cfg.clk_dir = regk_sser_out;
+				break;
+			case SLAVE_INPUT:
+				port->output = 0;
+				port->input = 1;
+				gen_cfg.clk_dir = regk_sser_in;
+				break;
+			case MASTER_BIDIR:
+				port->output = 1;
+				port->input = 1;
+				gen_cfg.clk_dir = regk_sser_out;
+				break;
+			case SLAVE_BIDIR:
+				port->output = 1;
+				port->input = 1;
+				gen_cfg.clk_dir = regk_sser_in;
+				break;
+			default:
+				spin_unlock_irq(&port->lock);
+				return -EINVAL;
+
+		}
+		if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT))
+			intr_mask.rdav = regk_sser_yes;
+		break;
+	case SSP_FRAME_SYNC:
+		if (arg & NORMAL_SYNC)
+			frm_cfg.tr_delay = 1;
+		else if (arg & EARLY_SYNC)
+			frm_cfg.tr_delay = 0;
+
+		tr_cfg.bulk_wspace = frm_cfg.tr_delay;
+		frm_cfg.early_wend = regk_sser_yes;
+		if (arg & BIT_SYNC)
+			frm_cfg.type = regk_sser_edge;
+		else if (arg & WORD_SYNC)
+			frm_cfg.type = regk_sser_level;
+		else if (arg & EXTENDED_SYNC)
+			frm_cfg.early_wend = regk_sser_no;
+
+		if (arg & SYNC_ON)
+			frm_cfg.frame_pin_use = regk_sser_frm;
+		else if (arg & SYNC_OFF)
+			frm_cfg.frame_pin_use = regk_sser_gio0;
+
+		if (arg & WORD_SIZE_8)
+			rec_cfg.sample_size = tr_cfg.sample_size = 7;
+		else if (arg & WORD_SIZE_12)
+			rec_cfg.sample_size = tr_cfg.sample_size = 11;
+		else if (arg & WORD_SIZE_16)
+			rec_cfg.sample_size = tr_cfg.sample_size = 15;
+		else if (arg & WORD_SIZE_24)
+			rec_cfg.sample_size = tr_cfg.sample_size = 23;
+		else if (arg & WORD_SIZE_32)
+			rec_cfg.sample_size = tr_cfg.sample_size = 31;
+
+		if (arg & BIT_ORDER_MSB)
+			rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst;
+		else if (arg & BIT_ORDER_LSB)
+			rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst;
+
+		if (arg & FLOW_CONTROL_ENABLE)
+			rec_cfg.fifo_thr = regk_sser_thr16;
+		else if (arg & FLOW_CONTROL_DISABLE)
+			rec_cfg.fifo_thr = regk_sser_inf;
+
+		if (arg & CLOCK_NOT_GATED)
+			gen_cfg.gate_clk = regk_sser_no;
+		else if (arg & CLOCK_GATED)
+			gen_cfg.gate_clk = regk_sser_yes;
+
+		break;
+	case SSP_IPOLARITY:
+		/* NOTE!! negedge is considered NORMAL */
+		if (arg & CLOCK_NORMAL)
+			rec_cfg.clk_pol = regk_sser_neg;
+		else if (arg & CLOCK_INVERT)
+			rec_cfg.clk_pol = regk_sser_pos;
+
+		if (arg & FRAME_NORMAL)
+			frm_cfg.level = regk_sser_pos_hi;
+		else if (arg & FRAME_INVERT)
+			frm_cfg.level = regk_sser_neg_lo;
+
+		if (arg & STATUS_NORMAL)
+			gen_cfg.hold_pol = regk_sser_pos;
+		else if (arg & STATUS_INVERT)
+			gen_cfg.hold_pol = regk_sser_neg;
+		break;
+	case SSP_OPOLARITY:
+		if (arg & CLOCK_NORMAL)
+			gen_cfg.out_clk_pol = regk_sser_neg;
+		else if (arg & CLOCK_INVERT)
+			gen_cfg.out_clk_pol = regk_sser_pos;
+
+		if (arg & FRAME_NORMAL)
+			frm_cfg.level = regk_sser_pos_hi;
+		else if (arg & FRAME_INVERT)
+			frm_cfg.level = regk_sser_neg_lo;
+
+		if (arg & STATUS_NORMAL)
+			gen_cfg.hold_pol = regk_sser_pos;
+		else if (arg & STATUS_INVERT)
+			gen_cfg.hold_pol = regk_sser_neg;
+		break;
+	case SSP_SPI:
+		rec_cfg.fifo_thr = regk_sser_inf;
+		rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst;
+		rec_cfg.sample_size = tr_cfg.sample_size = 7;
+		frm_cfg.frame_pin_use = regk_sser_frm;
+		frm_cfg.type = regk_sser_level;
+		frm_cfg.tr_delay = 1;
+		frm_cfg.level = regk_sser_neg_lo;
+		if (arg & SPI_SLAVE)
+		{
+			rec_cfg.clk_pol = regk_sser_neg;
+			gen_cfg.clk_dir = regk_sser_in;
+			port->input = 1;
+			port->output = 0;
+		}
+		else
+		{
+			gen_cfg.out_clk_pol = regk_sser_pos;
+			port->input = 0;
+			port->output = 1;
+			gen_cfg.clk_dir = regk_sser_out;
+		}
+		break;
+	case SSP_INBUFCHUNK:
+		break;
+	default:
+		return_val = -1;
+	}
+
+
+	if (port->started)
+	{
+		tr_cfg.tr_en = port->output;
+		rec_cfg.rec_en = port->input;
+	}
+
+	REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
+	REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
+	REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg);
+	REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
+	REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg);
+
+	spin_unlock_irq(&port->lock);
+	return return_val;
+}
+
+static ssize_t sync_serial_write(struct file * file, const char * buf,
+                                 size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	DECLARE_WAITQUEUE(wait, current);
+	sync_port *port;
+	unsigned long c, c1;
+	unsigned long free_outp;
+	unsigned long outp;
+	unsigned long out_buffer;
+	unsigned long flags;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
+	{
+		DEBUG(printk("Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
+	/* Space to end of buffer */
+	/*
+	 * out_buffer <c1>012345<-   c    ->OUT_BUFFER_SIZE
+	 *            outp^    +out_count
+	                        ^free_outp
+	 * out_buffer 45<-     c      ->0123OUT_BUFFER_SIZE
+	 *             +out_count   outp^
+	 *              free_outp
+	 *
+	 */
+
+	/* Read variables that may be updated by interrupts */
+	spin_lock_irqsave(&port->lock, flags);
+	count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE  - port->out_count : count;
+	outp = (unsigned long)port->outp;
+	free_outp = outp + port->out_count;
+	spin_unlock_irqrestore(&port->lock, flags);
+	out_buffer = (unsigned long)port->out_buffer;
+
+	/* Find out where and how much to write */
+	if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
+		free_outp -= OUT_BUFFER_SIZE;
+	if (free_outp >= outp)
+		c = out_buffer + OUT_BUFFER_SIZE - free_outp;
+	else
+		c = outp - free_outp;
+	if (c > count)
+		c = count;
+
+//	DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c));
+	if (copy_from_user((void*)free_outp, buf, c))
+		return -EFAULT;
+
+	if (c != count) {
+		buf += c;
+		c1 = count - c;
+		DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1));
+		if (copy_from_user((void*)out_buffer, buf, c1))
+			return -EFAULT;
+	}
+	spin_lock_irqsave(&port->lock, flags);
+	port->out_count += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Make sure transmitter/receiver is running */
+	if (!port->started)
+	{
+		reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
+		reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
+		reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
+		cfg.en = regk_sser_yes;
+		tr_cfg.tr_en = port->output;
+		rec_cfg.rec_en = port->input;
+		REG_WR(sser, port->regi_sser, rw_cfg, cfg);
+		REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
+		REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
+		port->started = 1;
+	}
+
+	if (file->f_flags & O_NONBLOCK)	{
+		spin_lock_irqsave(&port->lock, flags);
+		if (!port->tr_running) {
+			if (!port->use_dma) {
+				reg_sser_rw_intr_mask intr_mask;
+				intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
+				/* Start sender by writing data */
+				send_word(port);
+				/* and enable transmitter ready IRQ */
+				intr_mask.trdy = 1;
+				REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
+			} else {
+				start_dma(port, (unsigned char* volatile )port->outp, c);
+			}
+		}
+		spin_unlock_irqrestore(&port->lock, flags);
+		DEBUGWRITE(printk("w d%d c %lu NB\n",
+				  port->port_nbr, count));
+		return count;
+	}
+
+	/* Sleep until all sent */
+
+	add_wait_queue(&port->out_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	spin_lock_irqsave(&port->lock, flags);
+	if (!port->tr_running) {
+		if (!port->use_dma) {
+			reg_sser_rw_intr_mask intr_mask;
+			intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
+			/* Start sender by writing data */
+			send_word(port);
+			/* and enable transmitter ready IRQ */
+			intr_mask.trdy = 1;
+			REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
+		} else {
+			start_dma(port, port->outp, c);
+		}
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+	schedule();
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&port->out_wait_q, &wait);
+	if (signal_pending(current))
+	{
+		return -EINTR;
+	}
+	DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count));
+	return count;
+}
+
+static ssize_t sync_serial_read(struct file * file, char * buf,
+				size_t count, loff_t *ppos)
+{
+	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int avail;
+	sync_port *port;
+	unsigned char* start;
+	unsigned char* end;
+	unsigned long flags;
+
+	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
+	{
+		DEBUG(printk("Invalid minor %d\n", dev));
+		return -ENODEV;
+	}
+	port = &ports[dev];
+
+	DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size));
+
+	if (!port->started)
+	{
+		reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
+		reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
+		reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
+		cfg.en = regk_sser_yes;
+		tr_cfg.tr_en = regk_sser_yes;
+		rec_cfg.rec_en = regk_sser_yes;
+		REG_WR(sser, port->regi_sser, rw_cfg, cfg);
+		REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
+		REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
+		port->started = 1;
+	}
+
+
+	/* Calculate number of available bytes */
+	/* Save pointers to avoid that they are modified by interrupt */
+	spin_lock_irqsave(&port->lock, flags);
+	start = (unsigned char*)port->readp; /* cast away volatile */
+	end = (unsigned char*)port->writep;  /* cast away volatile */
+	spin_unlock_irqrestore(&port->lock, flags);
+	while ((start == end) && !port->full) /* No data */
+	{
+		if (file->f_flags & O_NONBLOCK)
+		{
+			return -EAGAIN;
+		}
+
+		interruptible_sleep_on(&port->in_wait_q);
+		if (signal_pending(current))
+		{
+			return -EINTR;
+		}
+		spin_lock_irqsave(&port->lock, flags);
+		start = (unsigned char*)port->readp; /* cast away volatile */
+		end = (unsigned char*)port->writep;  /* cast away volatile */
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
+	/* Lazy read, never return wrapped data. */
+	if (port->full)
+		avail = port->in_buffer_size;
+	else if (end > start)
+		avail = end - start;
+	else
+		avail = port->flip + port->in_buffer_size - start;
+
+	count = count > avail ? avail : count;
+	if (copy_to_user(buf, start, count))
+		return -EFAULT;
+	/* Disable interrupts while updating readp */
+	spin_lock_irqsave(&port->lock, flags);
+	port->readp += count;
+	if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
+		port->readp = port->flip;
+	port->full = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+	DEBUGREAD(printk("r %d\n", count));
+	return count;
+}
+
+static void send_word(sync_port* port)
+{
+	reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
+	reg_sser_rw_tr_data tr_data =  {0};
+
+	switch(tr_cfg.sample_size)
+	{
+	 case 8:
+		 port->out_count--;
+		 tr_data.data = *port->outp++;
+		 REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		 if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			 port->outp = port->out_buffer;
+		 break;
+	 case 12:
+	 {
+		int data = (*port->outp++) << 8;
+		data |= *port->outp++;
+		port->out_count-=2;
+		tr_data.data = data;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+	}
+	break;
+	case 16:
+		port->out_count-=2;
+		tr_data.data = *(unsigned short *)port->outp;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		port->outp+=2;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case 24:
+		port->out_count-=3;
+		tr_data.data = *(unsigned short *)port->outp;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		port->outp+=2;
+		tr_data.data = *port->outp++;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	case 32:
+		port->out_count-=4;
+		tr_data.data = *(unsigned short *)port->outp;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		port->outp+=2;
+		tr_data.data = *(unsigned short *)port->outp;
+		REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
+		port->outp+=2;
+		if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+			port->outp = port->out_buffer;
+		break;
+	}
+}
+
+
+static void start_dma(struct sync_port* port, const char* data, int count)
+{
+	port->tr_running = 1;
+	port->out_descr.buf = (char*)virt_to_phys((char*)data);
+	port->out_descr.after = port->out_descr.buf + count;
+	port->out_descr.eol = port->out_descr.intr = 1;
+
+	port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr);
+	port->out_context.saved_data_buf = port->out_descr.buf;
+
+	DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context));
+	DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count));
+}
+
+static void start_dma_in(sync_port* port)
+{
+	int i;
+	char* buf;
+	port->writep = port->flip;
+
+	if (port->writep > port->flip + port->in_buffer_size)
+	{
+		panic("Offset too large in sync serial driver\n");
+		return;
+	}
+	buf = (char*)virt_to_phys(port->in_buffer);
+	for (i = 0; i < NUM_IN_DESCR; i++) {
+		port->in_descr[i].buf = buf;
+		port->in_descr[i].after = buf + port->inbufchunk;
+		port->in_descr[i].intr = 1;
+		port->in_descr[i].next = (dma_descr_data*)virt_to_phys(&port->in_descr[i+1]);
+		port->in_descr[i].buf = buf;
+		buf += port->inbufchunk;
+	}
+	/* Link the last descriptor to the first */
+	port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]);
+	port->in_descr[i-1].eol = regk_sser_yes;
+	port->next_rx_desc = &port->in_descr[0];
+	port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
+	port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]);
+	port->in_context.saved_data_buf = port->in_descr[0].buf;
+	DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context));
+}
+
+#ifdef SYNC_SER_DMA
+static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	reg_dma_r_masked_intr masked;
+	reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
+	int i;
+	struct dma_descr_data *descr;
+	unsigned int sentl;
+	int found = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++)
+	{
+		sync_port *port = &ports[i];
+		if (!port->enabled  || !port->use_dma )
+			continue;
+
+		masked = REG_RD(dma, port->regi_dmaout, r_masked_intr);
+
+		if (masked.data) /* IRQ active for the port? */
+		{
+			found = 1;
+			/* Clear IRQ */
+			REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr);
+			descr = &port->out_descr;
+			sentl = descr->after - descr->buf;
+			port->out_count -= sentl;
+			port->outp += sentl;
+			if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
+				port->outp = port->out_buffer;
+			if (port->out_count)  {
+				int c;
+				c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
+				if (c > port->out_count)
+					c = port->out_count;
+				DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c));
+				start_dma(port, port->outp, c);
+			} else  {
+				DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl));
+				port->tr_running = 0;
+			}
+			wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */
+		}
+	}
+	return IRQ_RETVAL(found);
+} /* tr_interrupt */
+
+static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	reg_dma_r_masked_intr masked;
+	reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
+
+	int i;
+	int found = 0;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++)
+	{
+		sync_port *port = &ports[i];
+
+		if (!port->enabled || !port->use_dma )
+			continue;
+
+		masked = REG_RD(dma, port->regi_dmain, r_masked_intr);
+
+		if (masked.data) /* Descriptor interrupt */
+		{
+			found = 1;
+			while (REG_RD(dma, port->regi_dmain, rw_data) !=
+			       virt_to_phys(port->next_rx_desc)) {
+
+				if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) {
+					int first_size = port->flip + port->in_buffer_size - port->writep;
+					memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size);
+					memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size);
+					port->writep = port->flip + port->inbufchunk - first_size;
+				} else {
+					memcpy((char*)port->writep,
+					       phys_to_virt((unsigned)port->next_rx_desc->buf),
+					       port->inbufchunk);
+					port->writep += port->inbufchunk;
+					if (port->writep >= port->flip + port->in_buffer_size)
+						port->writep = port->flip;
+				}
+                                if (port->writep == port->readp)
+                                {
+				  port->full = 1;
+                                }
+
+				port->next_rx_desc->eol = 0;
+				port->prev_rx_desc->eol = 1;
+				port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc);
+				port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next);
+				wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */
+				DMA_CONTINUE(port->regi_dmain);
+				REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr);
+
+			}
+		}
+	}
+	return IRQ_RETVAL(found);
+} /* rx_interrupt */
+#endif /* SYNC_SER_DMA */
+
+#ifdef SYNC_SER_MANUAL
+static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	int i;
+	int found = 0;
+	reg_sser_r_masked_intr masked;
+
+	for (i = 0; i < NUMBER_OF_PORTS; i++)
+	{
+		sync_port* port = &ports[i];
+
+		if (!port->enabled || port->use_dma)
+		{
+			continue;
+		}
+
+		masked = REG_RD(sser, port->regi_sser, r_masked_intr);
+		if (masked.rdav)	/* Data received? */
+		{
+			reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
+			reg_sser_r_rec_data data = REG_RD(sser, port->regi_sser, r_rec_data);
+			found = 1;
+			/* Read data */
+			switch(rec_cfg.sample_size)
+			{
+			case 8:
+				*port->writep++ = data.data & 0xff;
+				break;
+			case 12:
+				*port->writep = (data.data & 0x0ff0) >> 4;
+				*(port->writep + 1) = data.data & 0x0f;
+				port->writep+=2;
+				break;
+			case 16:
+				*(unsigned short*)port->writep = data.data;
+				port->writep+=2;
+				break;
+			case 24:
+				*(unsigned int*)port->writep = data.data;
+				port->writep+=3;
+				break;
+			case 32:
+				*(unsigned int*)port->writep = data.data;
+				port->writep+=4;
+				break;
+			}
+
+			if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */
+				port->writep = port->flip;
+			if (port->writep == port->readp) {
+				/* receive buffer overrun, discard oldest data
+				 */
+				port->readp++;
+				if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
+					port->readp = port->flip;
+			}
+			if (sync_data_avail(port) >= port->inbufchunk)
+				wake_up_interruptible(&port->in_wait_q); /* Wake up application */
+		}
+
+		if (masked.trdy) /* Transmitter ready? */
+		{
+			found = 1;
+			if (port->out_count > 0) /* More data to send */
+				send_word(port);
+			else /* transmission finished */
+			{
+				reg_sser_rw_intr_mask intr_mask;
+				intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
+				intr_mask.trdy = 0;
+				REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
+				wake_up_interruptible(&port->out_wait_q); /* Wake up application */
+			}
+		}
+	}
+	return IRQ_RETVAL(found);
+}
+#endif
+
+module_init(etrax_sync_serial_init);