Merge tag 'v3.4-rc2' into regulator-drivers

Linux 3.4-rc2 contains some fixes that further patches depend upon.

73 files changed, 476 insertions, 243 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93180845ae16..cf006d40342c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -338,6 +338,7 @@ config ARCH_AT91
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_DOMAIN
+	select NEED_MACH_IO_H if PCCARD
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 processors.
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 92f36627e7f8..799ad1889b51 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index ac0dc0031dda..7829a4d0cb22 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -37,8 +37,8 @@
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 0
-					   &pioD 20 0
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
 					  >;
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3d0c32fb218f..9e6eb6ecea0e 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -36,7 +36,7 @@
 		};
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x10000000>;
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index c4c8ae4123d5..a3633bd13111 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -17,7 +17,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
-	memory@70000000 {
+	memory {
 		reg = <0x70000000 0x4000000>;
 	};
 
@@ -73,8 +73,8 @@
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 0
-					   &pioD 3 0>;
+			atmel,vbus-gpio = <&pioD 1 1
+					   &pioD 3 1>;
 		};
 
 		usb1: ehci@00800000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index c111001f254e..70ab3a4e026f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -34,7 +34,7 @@
 		};
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -201,8 +201,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioD 5 0
+				 &pioD 4 0
 				 0
 				>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 67936f83c694..31e7be23703d 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x8000000>;
 	};
 
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 3b3c4e0fa79f..7c2399c532e5 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -16,7 +16,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory@20000000 {
+	memory {
 		reg = <0x20000000 0x4000000>;
 	};
 
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 44f4a09ff37b..05112380dc53 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -2,6 +2,7 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
+#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -39,7 +40,6 @@
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#include <asm/outercache.h>
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		mb()
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index df0ac0bb39aa..9af5563dd3eb 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -119,7 +119,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
 #else
-#define __io(a)		({ (void)(a); __typesafe_io(0); })
+#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
 #endif
 
 /*
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 632df9a66f8c..ede5f7741c42 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -299,7 +299,6 @@ static inline int pdev_bad_for_parity(struct pci_dev *dev)
  */
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_sys_data *root = bus->sysdata;
 	struct pci_dev *dev;
 	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
 
diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c
index ab312e516546..b760340b7014 100644
--- a/arch/arm/kernel/insn.c
+++ b/arch/arm/kernel/insn.c
@@ -1,3 +1,4 @@
+#include <linux/bug.h>
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index ab1869dac97a..4dd41fc9e235 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -152,7 +152,7 @@ int __kprobes __arch_disarm_kprobe(void *p)
 
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
+	stop_machine(__arch_disarm_kprobe, p, cpu_online_mask);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 45956c9d0ef0..80abafb9bf33 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -256,7 +256,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 {
 	unsigned long tmp;
 
-	if (off & 3 || off >= sizeof(struct user))
+	if (off & 3)
 		return -EIO;
 
 	tmp = 0;
@@ -268,6 +268,8 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		tmp = tsk->mm->end_code;
 	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
+	else if (off >= sizeof(struct user))
+		return -EIO;
 
 	return put_user(tmp, ret);
 }
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 2cee7d1eb958..addbbe8028c2 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -349,7 +349,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		 * re-initialize the map in platform_smp_prepare_cpus() if
 		 * present != possible (e.g. physical hotplug).
 		 */
-		init_cpu_present(&cpu_possible_map);
+		init_cpu_present(cpu_possible_mask);
 
 		/*
 		 * Initialise the SCU if there are more than one CPU
@@ -581,8 +581,9 @@ void smp_send_stop(void)
 	unsigned long timeout;
 
 	if (num_online_cpus() > 1) {
-		cpumask_t mask = cpu_online_map;
-		cpu_clear(smp_processor_id(), mask);
+		struct cpumask mask;
+		cpumask_copy(&mask, cpu_online_mask);
+		cpumask_clear_cpu(smp_processor_id(), &mask);
 
 		smp_cross_call(&mask, IPI_CPU_STOP);
 	}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7e5651ee9f85..5652dde4bbe2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -598,6 +598,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 096da87dc00d..4db961a93085 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -415,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 53688c46f956..fe99206de880 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -72,7 +72,8 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
@@ -671,6 +672,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 698479f1e197..6b008aee1dff 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -127,12 +127,13 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 
@@ -188,7 +189,8 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
+			at91_set_gpio_output(data->vbus_pin[i],
+					     data->vbus_pin_active_low[i]);
 	}
 
 	usbh_ehci_data = *data;
@@ -785,6 +787,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi1_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		if (devices[i].bus_num == 0)
 			enable_spi0 = 1;
 		else
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index eda72e83037d..fe4ae22e8561 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -419,6 +419,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		else
 			cs_pin = spi_standard_cs[devices[i].chip_select];
 
+		if (!gpio_is_valid(cs_pin))
+			continue;
+
 		/* enable chip-select pin */
 		at91_set_gpio_output(cs_pin, 1);
 
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index b6831eeb7b76..13c8cae60462 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -223,6 +223,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
+	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
 	CLKDEV_CON_ID("pioA", &pioAB_clk),
 	CLKDEV_CON_ID("pioB", &pioAB_clk),
 	CLKDEV_CON_ID("pioC", &pioCD_clk),
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 66f0ddf4b2ae..2ffe50f3a9e9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
 	.ports		= 2,
 	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e1bea73e6b30..c88e908ddd82 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -71,6 +71,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
 	.ports		= 2,
 	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+	.vbus_pin_active_low = {1, 1},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 544a5d5ce416..49a821192c65 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
 extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
+#define AT91_MAX_USBH_PORTS	3
 struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_active_low[2];
+	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
+	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
+	u8		ports;				/* number of ports on root hub */
 	u8              overcurrent_supported;
-	int             overcurrent_pin[2];
-	u8              overcurrent_status[2];
-	u8              overcurrent_changed[2];
+	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
+	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 000000000000..2d9ca0455745
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+#define __io(a)			__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index e6cc50e94a58..8614aab47cc0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -583,10 +583,11 @@ core_initcall(exynos_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+	int ret;
+
 	if (soc_is_exynos5250())
 		return 0;
 
-	int ret;
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
 	if (!ret) {
 		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 3983abee4264..69aaa4503205 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -35,8 +35,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 exynos4210_pdma0_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6c857ff0b5d8..e0c86ea475e7 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,9 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		mov	\rp, #0x10000000
-		ldr	\rp, [\rp, #0x0]
-		and	\rp, \rp, #0xf00000
-		teq	\rp, #0x500000		@@ EXYNOS5
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
 		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 493f4f365ddf..2979995d5a6a 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -20,9 +20,24 @@ volatile u8 *uart_base;
 
 #include <plat/uncompress.h>
 
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
 static void arch_detect_cpu(void)
 {
-	if (machine_is_smdk5250())
+	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
+
+	/*
+	 * product_id is bits 31:12
+	 *    bits 23:20 describe the exynosX family
+	 *
+	 */
+	chip_id >>= 20;
+	chip_id &= 0xf;
+
+	if (chip_id == 0x5)
 		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
 		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index b9a95ed75553..98e04f5a87dd 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
 	_REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
 	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 1e279af656ad..e56c1a83eee3 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -483,7 +483,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 27bc27e6ea41..c650145d1646 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -38,6 +38,8 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -479,6 +481,11 @@ static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 /*
  * Perform board specific initializations
  */
@@ -489,6 +496,8 @@ static void __init armadillo5x0_init(void)
 	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index fc78e8071cd1..15a26e908260 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -24,6 +24,8 @@
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
 #include <linux/types.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -166,6 +168,11 @@ static struct platform_device kzm_smsc9118_device = {
 			  },
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static int __init kzm_init_smsc9118(void)
 {
 	/*
@@ -175,6 +182,8 @@ static int __init kzm_init_smsc9118(void)
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	return platform_device_register(&kzm_smsc9118_device);
 }
 #else
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 02401bbd6d53..83714b0cc290 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -34,6 +34,8 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -242,6 +244,11 @@ static struct platform_device *devices[] __initdata = {
 static int mx31lilly_baseboard;
 core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static void __init mx31lilly_board_init(void)
 {
 	imx31_soc_init();
@@ -280,6 +287,8 @@ static void __init mx31lilly_board_init(void)
 	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* USB */
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ef80751712e7..0abef5f13df5 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -29,6 +29,8 @@
 #include <linux/usb/ulpi.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -226,6 +228,11 @@ void __init mx31lite_map_io(void)
 static int mx31lite_baseboard;
 core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 static void __init mx31lite_init(void)
 {
 	int ret;
@@ -259,6 +266,8 @@ static void __init mx31lite_init(void)
 	if (usbh2_pdata.otg)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index e14291d89e4f..6ae51c6b95b7 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -97,7 +97,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = {
 static int lcd_power_gpio = -ENXIO;
 
 static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
-						     void *data)
+						     const void *data)
 {
 	return !strcmp(chip->label, data);
 }
diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index 753f4fc9ec04..05641980dc5e 100644
--- a/arch/arm/mach-imx/mach-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -214,6 +216,11 @@ static int weim_cs_config(void)
 	return 0;
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
 void __init imx53_ard_common_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
@@ -232,6 +239,7 @@ static void __init mx53_ard_board_init(void)
 
 	imx53_ard_common_init();
 	mx53_ard_io_init();
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index 169a84007456..c14011fe832d 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -16,6 +16,7 @@
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
 #define __ASM_ARCH_MSM_UNCOMPRESS_H
 
+#include <asm/barrier.h>
 #include <asm/processor.h>
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index 0c56a5aaf588..c56df9e932ae 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -203,15 +203,9 @@ static ssize_t debug_read(struct file *file, char __user *buf,
 	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
 }
 
-static int debug_open(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
 static const struct file_operations debug_ops = {
 	.read = debug_read,
-	.open = debug_open,
+	.open = simple_open,
 	.llseek = default_llseek,
 };
 
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 000000000000..ce4f8005b26f
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 41b0a2fe0b04..909a8b91b564 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -26,6 +26,7 @@
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 
@@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
 	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 };
 
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init cm_t35_init_ethernet(void)
 {
+	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
+	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+				 ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
 	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
 	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
 }
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e558800adfdf..930c0d380435 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void)
 static inline void __init igep_wlan_bt_init(void) { }
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init igep_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	/* Get IGEP2 hardware revision */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d50a562adfa0..1b6049567ab4 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/io.h>
@@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = {
 
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap_ldp_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	ldp_init_smsc911x();
 	omap_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c90f078abe1..49df12735b41 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3evm_init_smsc911x(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	/* Configure ethernet controller reset gpio */
 	if (cpu_is_omap3430()) {
 		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
@@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void)
 #endif
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
 	if (cpu_is_omap3630())
 		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a7d8c8a75da..9b3c141ff51b 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/i2c/twl.h>
@@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3logic_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3torpedo_fix_pbias_voltage();
 	omap3logic_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 641004380795..4dffc95bddd2 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
@@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3stalker_init_eth(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
 	gpmc_smsc911x_init(&smsc911x_cfg);
 }
@@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_stalker_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 668533e2a379..33aa3910b09e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = {
 	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init overo_init(void)
 {
 	int ret;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_hsmmc_init(mmc);
 	overo_i2c_init();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1e8540eabde9..f64f44173061 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,6 +14,9 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
@@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = {
 	&zoom_debugboard_serial_device,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 int __init zoom_debugboard_init(void)
 {
 	if (!omap_zoom_debugboard_detect())
 		return 0;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	zoom_init_smsc911x();
 	zoom_init_quaduart();
 	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 480fb8f09aed..f4a626f7c79e 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -747,7 +747,7 @@ static struct clk dpll4_m3_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_TV_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -832,7 +832,7 @@ static struct clk dpll4_m4_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_DSS1_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -859,7 +859,7 @@ static struct clk dpll4_m5_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel_mask	= OMAP3630_CLKSEL_CAM_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.set_rate	= &omap2_clksel_set_rate,
@@ -886,7 +886,7 @@ static struct clk dpll4_m6_ck = {
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel_mask	= OMAP3630_DIV_DPLL4_MASK,
 	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
@@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1403,6 +1404,7 @@ static struct clk ts_fck = {
 	.name		= "ts_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_32k_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = {
 	.name		= "fshostusb_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2043,6 +2047,7 @@ static struct clk omapctrl_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2094,6 +2099,7 @@ static struct clk usb_l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
 	.clksel		= usb_l4_clksel,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -3467,8 +3473,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
-	CLK("davinci_emac",	"emac_clk",	&emac_ick,	CK_AM35XX),
-	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
+	CLK("davinci_emac",	NULL,	&emac_ick,	CK_AM35XX),
+	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK("musb-am35x",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c03c1108468e..fa6ea65ad44b 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -957,8 +957,8 @@ static struct dpll_data dpll_usb_dd = {
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
 	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
@@ -978,6 +978,7 @@ static struct clk dpll_usb_ck = {
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "l3_init_clkdm",
 };
 
 static struct clk dpll_usb_clkdcoldo_ck = {
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 9299ac291d28..bd7ed13515cc 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -390,7 +390,7 @@ static struct clockdomain emu_sys_44xx_clkdm = {
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3_dma_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 5e5880d6d099..b6c77be3e8f7 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,15 +19,11 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
-static struct omap_smsc911x_platform_data *gpmc_cfg;
-
 static struct resource gpmc_smsc911x_resources[] = {
 	[0] = {
 		.flags		= IORESOURCE_MEM,
@@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/* Generic regulator definition to satisfy smsc911x */
-static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
-	.consumer_supplies	= gpmc_smsc911x_supply,
-};
-
-static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
-	.supply_name		= "gpmc_smsc911x",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.enable_high		= 0,
-	.enabled_at_boot	= 1,
-	.init_data		= &gpmc_smsc911x_reg_init_data,
-};
-
-/*
- * Platform device id of 42 is a temporary fix to avoid conflicts
- * with other reg-fixed-voltage devices. The real fix should
- * involve the driver core providing a way of dynamically
- * assigning a unique id on registration for platform devices
- * in the same name space.
- */
-static struct platform_device gpmc_smsc911x_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 42,
-	.dev = {
-		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
-	},
 };
 
 /*
@@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = {
  * assume that pin multiplexing is done in the board-*.c file,
  * or in the bootloader.
  */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
+void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
 {
 	struct platform_device *pdev;
 	unsigned long cs_mem_base;
 	int ret;
 
-	gpmc_cfg = board_data;
-
-	if (!gpmc_cfg->id) {
-		ret = platform_device_register(&gpmc_smsc911x_regulator);
-		if (ret < 0) {
-			pr_err("Unable to register smsc911x regulators: %d\n",
-			       ret);
-			return;
-		}
-	}
-
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
@@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 		gpio_set_value(gpmc_cfg->gpio_reset, 1);
 	}
 
-	if (gpmc_cfg->flags)
-		gpmc_smsc911x_config.flags = gpmc_cfg->flags;
+	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
 
 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 100db6217f39..b0268eaffe13 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -506,6 +506,13 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
+		/*
+		 * erratum 2.1.1.128 doesn't apply if board has
+		 * a transceiver is attached
+		 */
+		if (hsmmcinfo->transceiver)
+			mmc_data->controller_flags &=
+				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
 	}
 
 	pdev = platform_device_alloc(name, ctrl_nr - 1);
diff --git a/arch/arm/mach-omap2/include/mach/barriers.h b/arch/arm/mach-omap2/include/mach/barriers.h
index 4fa72c7cc7cd..1c582a8592b9 100644
--- a/arch/arm/mach-omap2/include/mach/barriers.h
+++ b/arch/arm/mach-omap2/include/mach/barriers.h
@@ -22,6 +22,8 @@
 #ifndef __MACH_BARRIERS_H
 #define __MACH_BARRIERS_H
 
+#include <asm/outercache.h>
+
 extern void omap_bus_sync(void);
 
 #define rmb()		dsb()
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index eba6cd3816f5..2c27fdb61e66 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v;
+	u32 v, softrst_mask;
 	int c = 0;
 	int ret = 0;
 
@@ -1427,11 +1427,13 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 						    oh->class->sysc->syss_offs)
 				   & SYSS_RESETDONE_MASK),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
 		omap_test_timeout(!(omap_hwmod_read(oh,
 						     oh->class->sysc->sysc_offs)
-				   & SYSC_TYPE2_SOFTRESET_MASK),
+				   & softrst_mask),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
@@ -1477,6 +1479,11 @@ static int _reset(struct omap_hwmod *oh)
 
 	ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
 
+	if (oh->class->sysc) {
+		_update_sysc_cache(oh);
+		_enable_sysc(oh);
+	}
+
 	return ret;
 }
 
@@ -1786,20 +1793,9 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		return 0;
 	}
 
-	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+	if (!(oh->flags & HWMOD_INIT_NO_RESET))
 		_reset(oh);
 
-		/*
-		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
-		 * The _enable() function should be split to
-		 * avoid the rewrite of the OCP_SYSCONFIG register.
-		 */
-		if (oh->class->sysc) {
-			_update_sysc_cache(oh);
-			_enable_sysc(oh);
-		}
-	}
-
 	postsetup_state = oh->_postsetup_state;
 	if (postsetup_state == _HWMOD_STATE_UNKNOWN)
 		postsetup_state = _HWMOD_STATE_ENABLED;
@@ -1907,20 +1903,10 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	u32 v;
-	int ret;
-
-	if (!oh || !(oh->_sysc_cache))
+	if (!oh)
 		return -EINVAL;
 
-	v = oh->_sysc_cache;
-	ret = _set_softreset(oh, &v);
-	if (ret)
-		goto error;
-	_write_sysconfig(v, oh);
-
-error:
-	return ret;
+	return _ocp_softreset(oh);
 }
 
 /**
@@ -2463,26 +2449,28 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
  * @oh: struct omap_hwmod *
  *
  * Sets the module OCP socket ENAWAKEUP bit to allow the module to
- * send wakeups to the PRCM.  Eventually this should sets PRCM wakeup
- * registers to cause the PRCM to receive wakeup events from the
- * module.  Does not set any wakeup routing registers beyond this
- * point - if the module is to wake up any other module or subsystem,
- * that must be set separately.  Called by omap_device code.  Returns
- * -EINVAL on error or 0 upon success.
+ * send wakeups to the PRCM, and enable I/O ring wakeup events for
+ * this IP block if it has dynamic mux entries.  Eventually this
+ * should set PRCM wakeup registers to cause the PRCM to receive
+ * wakeup events from the module.  Does not set any wakeup routing
+ * registers beyond this point - if the module is to wake up any other
+ * module or subsystem, that must be set separately.  Called by
+ * omap_device code.  Returns -EINVAL on error or 0 upon success.
  */
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 {
 	unsigned long flags;
 	u32 v;
 
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
-		return -EINVAL;
-
 	spin_lock_irqsave(&oh->_lock, flags);
-	v = oh->_sysc_cache;
-	_enable_wakeup(oh, &v);
-	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc &&
+	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
+		v = oh->_sysc_cache;
+		_enable_wakeup(oh, &v);
+		_write_sysconfig(v, oh);
+	}
+
 	_set_idle_ioring_wakeup(oh, true);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
@@ -2494,26 +2482,28 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Clears the module OCP socket ENAWAKEUP bit to prevent the module
- * from sending wakeups to the PRCM.  Eventually this should clear
- * PRCM wakeup registers to cause the PRCM to ignore wakeup events
- * from the module.  Does not set any wakeup routing registers beyond
- * this point - if the module is to wake up any other module or
- * subsystem, that must be set separately.  Called by omap_device
- * code.  Returns -EINVAL on error or 0 upon success.
+ * from sending wakeups to the PRCM, and disable I/O ring wakeup
+ * events for this IP block if it has dynamic mux entries.  Eventually
+ * this should clear PRCM wakeup registers to cause the PRCM to ignore
+ * wakeup events from the module.  Does not set any wakeup routing
+ * registers beyond this point - if the module is to wake up any other
+ * module or subsystem, that must be set separately.  Called by
+ * omap_device code.  Returns -EINVAL on error or 0 upon success.
  */
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 {
 	unsigned long flags;
 	u32 v;
 
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
-		return -EINVAL;
-
 	spin_lock_irqsave(&oh->_lock, flags);
-	v = oh->_sysc_cache;
-	_disable_wakeup(oh, &v);
-	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc &&
+	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
+		v = oh->_sysc_cache;
+		_disable_wakeup(oh, &v);
+		_write_sysconfig(v, oh);
+	}
+
 	_set_idle_ioring_wakeup(oh, false);
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 08daa5e0eb5f..cc9bd106a854 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2996,6 +2996,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = {
 	&omap44xx_l4_abe__mcbsp1_dma,
 };
 
+static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+};
+
 static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
 	.name		= "mcbsp1",
 	.class		= &omap44xx_mcbsp_hwmod_class,
@@ -3012,6 +3017,8 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
 	},
 	.slaves		= omap44xx_mcbsp1_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp1_slaves),
+	.opt_clks	= mcbsp1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp1_opt_clks),
 };
 
 /* mcbsp2 */
@@ -3071,6 +3078,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = {
 	&omap44xx_l4_abe__mcbsp2_dma,
 };
 
+static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+};
+
 static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
 	.name		= "mcbsp2",
 	.class		= &omap44xx_mcbsp_hwmod_class,
@@ -3087,6 +3099,8 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
 	},
 	.slaves		= omap44xx_mcbsp2_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp2_slaves),
+	.opt_clks	= mcbsp2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp2_opt_clks),
 };
 
 /* mcbsp3 */
@@ -3146,6 +3160,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = {
 	&omap44xx_l4_abe__mcbsp3_dma,
 };
 
+static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+};
+
 static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
 	.name		= "mcbsp3",
 	.class		= &omap44xx_mcbsp_hwmod_class,
@@ -3162,6 +3181,8 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
 	},
 	.slaves		= omap44xx_mcbsp3_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp3_slaves),
+	.opt_clks	= mcbsp3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp3_opt_clks),
 };
 
 /* mcbsp4 */
@@ -3200,6 +3221,11 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = {
 	&omap44xx_l4_per__mcbsp4,
 };
 
+static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
+	{ .role = "pad_fck", .clk = "pad_clks_ck" },
+	{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+};
+
 static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
 	.name		= "mcbsp4",
 	.class		= &omap44xx_mcbsp_hwmod_class,
@@ -3216,6 +3242,8 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
 	},
 	.slaves		= omap44xx_mcbsp4_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp4_slaves),
+	.opt_clks	= mcbsp4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcbsp4_opt_clks),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 9262a6b47702..de6d46451746 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 		}
 		oh = omap_hwmod_lookup(opp_def->hwmod_name);
 		if (!oh || !oh->od) {
-			pr_warn("%s: no hwmod or odev for %s, [%d] "
+			pr_debug("%s: no hwmod or odev for %s, [%d] "
 				"cannot add OPPs.\n", __func__,
 				opp_def->hwmod_name, i);
-			return -EINVAL;
+			continue;
 		}
 		dev = &oh->od->pdev->dev;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 238defc6f6df..703bd1099259 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void)
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
-			printk(KERN_ERR "save_secure_sram() returns %08x\n",
-				ret);
+			pr_err("save_secure_sram() returns %08x\n", ret);
 			while (1)
 				;
 		}
@@ -289,7 +288,7 @@ void omap_sram_idle(void)
 		break;
 	default:
 		/* Invalid state */
-		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		pr_err("Invalid mpu state in sram_idle\n");
 		return;
 	}
 
@@ -439,18 +438,17 @@ restore:
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
-			printk(KERN_INFO "Powerdomain (%s) didn't enter "
-			       "target state %d\n",
+			pr_info("Powerdomain (%s) didn't enter "
+				"target state %d\n",
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
-		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+		pr_err("Could not enter target state in pm_suspend\n");
 	else
-		printk(KERN_INFO "Successfully put all powerdomains "
-		       "to target state\n");
+		pr_info("Successfully put all powerdomains to target state\n");
 
 	return ret;
 }
@@ -734,21 +732,22 @@ static int __init omap3_pm_init(void)
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
-		goto err1;
+		goto err2;
 	}
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
-		printk(KERN_ERR "Failed to setup powerdomains\n");
-		goto err2;
+		pr_err("Failed to setup powerdomains\n");
+		goto err3;
 	}
 
 	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
-		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
-		goto err2;
+		pr_err("Failed to get mpu_pwrdm\n");
+		ret = -EINVAL;
+		goto err3;
 	}
 
 	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
@@ -781,8 +780,8 @@ static int __init omap3_pm_init(void)
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
-			printk(KERN_ERR "Memory allocation failed when"
-					"allocating for secure sram context\n");
+			pr_err("Memory allocation failed when "
+			       "allocating for secure sram context\n");
 
 		local_irq_disable();
 		local_fiq_disable();
@@ -796,14 +795,17 @@ static int __init omap3_pm_init(void)
 	}
 
 	omap3_save_scratchpad_contents();
-err1:
 	return ret;
-err2:
-	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+
+err3:
 	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
 		list_del(&pwrst->node);
 		kfree(pwrst);
 	}
+	free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
+err2:
+	free_irq(omap_prcm_event_to_irq("wkup"), NULL);
+err1:
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 9ccaadc2cf07..885625352429 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -144,7 +144,7 @@ static void omap_default_idle(void)
 static int __init omap4_pm_init(void)
 {
 	int ret;
-	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
 	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
 
 	if (!cpu_is_omap44xx())
@@ -168,14 +168,19 @@ static int __init omap4_pm_init(void)
 	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
 	 * expected. The hardware recommendation is to enable static
 	 * dependencies for these to avoid system lock ups or random crashes.
+	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
+	 * BUG with 32K synctimer which lead to incorrect timer value read
+	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
+	 * are part of L4 wakeup clockdomain.
 	 */
 	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
 	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
 	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
 	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
 	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
+	l4wkup = clkdm_lookup("l4_wkup_clkdm");
 	ducati_clkdm = clkdm_lookup("ducati_clkdm");
-	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
 		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
 		goto err2;
 
@@ -183,6 +188,7 @@ static int __init omap4_pm_init(void)
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
 	if (ret) {
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 8a18d1bd61c8..96ad3dbeac34 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -972,7 +972,13 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 
 int pwrdm_state_switch(struct powerdomain *pwrdm)
 {
-	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+	int ret;
+
+	ret = pwrdm_wait_transition(pwrdm);
+	if (!ret)
+		ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+
+	return ret;
 }
 
 int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index eac623c7c3d8..f106d21ff581 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
 	u32 mask, st;
 
 	/* XXX read mask from RAM? */
-	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
-	st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+				       irqen_offs);
+	st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs);
 
 	return mask & st;
 }
@@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events)
  */
 void omap44xx_prm_ocp_barrier(void)
 {
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void)
 void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
 	saved_mask[1] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
 
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 
 	/* OCP barrier */
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  */
 void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
-	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 873b51d494ea..d28f848897d6 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		goto err;
 	}
 
-	for (i = 0; i <= irq_setup->nr_regs; i++) {
+	for (i = 0; i < irq_setup->nr_regs; i++) {
 		gc = irq_alloc_generic_chip("PRCM", 1,
 			irq_setup->base_irq + i * 32, prm_base,
 			handle_level_irq);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index f51348dafafd..dde8a11f47d5 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 109ccd2a8885..fe2d1f80ef50 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -113,6 +113,7 @@ config MACH_ARMCORE
 	select IWMMXT
 	select PXA25x
 	select MIGHT_HAVE_PCI
+	select NEED_MACH_IO_H if PCI
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 000000000000..cd78b7fe3567
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
new file mode 100644
index 000000000000..c2f596e7bc2d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S3C24XX SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
+
+void s3c2410_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 48885b7efd6b..c7f418b0cde9 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -313,6 +313,10 @@ static struct sa1100fb_mach_info collie_lcd_info = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+#ifdef CONFIG_BACKLIGHT_LOCOMO
+	.lcd_power	= locomolcd_power
+#endif
 };
 
 static void __init collie_init(void)
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 52acda7061b7..f33679d2d3ee 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/collie.h
  *
- * This file contains the hardware specific definitions for Assabet
+ * This file contains the hardware specific definitions for Collie
  * Only include this file from SA1100-specific files.
  *
  * ChangeLog:
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index a6e23f464528..d2268be8c34c 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -190,7 +190,7 @@ static struct resource pre_mem = {
 	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
 };
 
-static int __init pci_versatile_setup_resources(struct list_head *resources)
+static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 {
 	int ret = 0;
 
@@ -218,9 +218,9 @@ static int __init pci_versatile_setup_resources(struct list_head *resources)
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(resources, &io_mem, sys->io_offset);
-	pci_add_resource_offset(resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(resources, &pre_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
 	goto out;
 
@@ -249,7 +249,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
-		ret = pci_versatile_setup_resources(&sys->resources);
+		ret = pci_versatile_setup_resources(sys);
 		if (ret < 0) {
 			printk("pci_versatile_setup: resources... oops?\n");
 			goto out;
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
index d1e31fa1b0c3..5cac2c540f4f 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -80,7 +80,7 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct platform_device smsc_lan9217_device = {
 	.name = "smsc911x",
-	.id = 0,
+	.id = -1,
 	.dev = {
 		.platform_data = &smsc911x_config,
 	},
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ce1e9b96ba1a..ad95c7a5d009 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP1
 	select IRQ_DOMAIN
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
+	select NEED_MACH_IO_H if PCCARD
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 56b6f8b7053e..8506cbb7fea4 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -441,6 +441,8 @@ static int __init clk_disable_unused(void)
 		return 0;
 
 	pr_info("clock: disabling unused clocks to save power\n");
+
+	spin_lock_irqsave(&clockfw_lock, flags);
 	list_for_each_entry(ck, &clocks, node) {
 		if (ck->ops == &clkops_null)
 			continue;
@@ -448,10 +450,9 @@ static int __init clk_disable_unused(void)
 		if (ck->usecount > 0 || !ck->enable_reg)
 			continue;
 
-		spin_lock_irqsave(&clockfw_lock, flags);
 		arch_clock->clk_disable_unused(ck);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
 	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 9e8e63d52aab..8070145ccb98 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -47,17 +47,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
  * with the original PRCM protocol defined for OMAP2420
  */
 #define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
 #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
 #define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
 #define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
 #define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
 #define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_AUTOIDLE_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant