Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

9 files changed, 75 insertions, 87 deletions

diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 009096d1d2c3..b4ca60f4eb42 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -73,7 +73,7 @@
 				400000
 				500000
 				600000 >;
-		status = "disable";
+		status = "disabled";
 	};
 
 	ahb {
@@ -118,15 +118,15 @@
 			compatible = "st,spear600-fsmc-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0xb0000000 0x1000	/* FSMC Register */
-			       0xb0800000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
+			reg = <0xb0000000 0x1000	/* FSMC Register*/
+			       0xb0800000 0x0010	/* NAND Base DATA */
+			       0xb0820000 0x0010	/* NAND Base ADDR */
+			       0xb0810000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			interrupts = <0 20 0x4
 				      0 21 0x4
 				      0 22 0x4
 				      0 23 0x4>;
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
 			st,mode = <2>;
 			status = "disabled";
 		};
@@ -144,7 +144,7 @@
 			compatible = "st,pcm-audio";
 			#address-cells = <0>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		smi: flash@ea000000 {
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 090adc656015..f79b3dfaabe6 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -38,10 +38,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x94000000 0x1000	/* FSMC Register */
-			       0x80000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0x80000000 0x0010	/* NAND Base DATA */
+			       0x80020000 0x0010	/* NAND Base ADDR */
+			       0x80010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e814e5e97083..ab45b8c81982 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -33,10 +33,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x44000000 0x1000	/* FSMC Register */
-			       0x40000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x10000>;
-			st,cle-off = <0x20000>;
+			       0x40000000 0x0010	/* NAND Base DATA */
+			       0x40020000 0x0010	/* NAND Base ADDR */
+			       0x40010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index c056a84deabf..caa5520b1fd4 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -40,10 +40,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x4c000000 0x1000	/* FSMC Register */
-			       0x50000000 0x0010>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0x50000000 0x0010	/* NAND Base DATA */
+			       0x50020000 0x0010	/* NAND Base ADDR */
+			       0x50010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index e051dde5181f..19f99dc4115e 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -76,10 +76,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0xd1800000 0x1000	/* FSMC Register */
-			       0xd2000000 0x4000>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
+			       0xd2000000 0x0010	/* NAND Base DATA */
+			       0xd2020000 0x0010	/* NAND Base ADDR */
+			       0xd2010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 240b25eea565..86cfd2959c47 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -57,7 +57,7 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 5ccdf53c5a9d..98167a4319f7 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/fsmc.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
@@ -33,7 +34,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
-#include <mach/fsmc.h>
 #include <mach/irqs.h>
 
 #include "cpu-8815.h"
@@ -42,39 +42,34 @@
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
+#define ALE_OFF 0x1000000
+#define CLE_OFF 0x800000
+
 /* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
+		.name = "nand_data",
+		.start = 0x40000000,
+		.end = 0x40000000 + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
 		.name = "nand_addr",
-		.start = NAND_IO_ADDR,
-		.end = NAND_IO_ADDR + 0xfff,
+		.start = 0x40000000 + ALE_OFF,
+		.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.name = "nand_cmd",
-		.start = NAND_IO_CMD,
-		.end = NAND_IO_CMD + 0xfff,
+		.start = 0x40000000 + CLE_OFF,
+		.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.name = "nand_data",
-		.start = NAND_IO_DATA,
-		.end = NAND_IO_DATA + 0xfff,
+		.name  = "fsmc_regs",
+		.start = NOMADIK_FSMC_BASE,
+		.end   = NOMADIK_FSMC_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	}
+	},
 };
 
-static int nhk8815_nand_init(void)
-{
-	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
-	writel(0x0000000E, FSMC_PCR(0));
-	writel(0x000D0A00, FSMC_PMEM(0));
-	writel(0x00100A00, FSMC_PATT(0));
-
-	/* enable access to the chip select area */
-	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
-
-	return 0;
-}
-
 /*
  * These partitions are the same as those used in the 2.6.20 release
  * shipped by the vendor; the first two partitions are mandated
@@ -108,20 +103,28 @@ static struct mtd_partition nhk8815_partitions[] = {
 	}
 };
 
-static struct nomadik_nand_platform_data nhk8815_nand_data = {
-	.parts		= nhk8815_partitions,
-	.nparts		= ARRAY_SIZE(nhk8815_partitions),
-	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING,
-	.init		= nhk8815_nand_init,
+static struct fsmc_nand_timings nhk8815_nand_timings = {
+	.thiz	= 0,
+	.thold	= 0x10,
+	.twait	= 0x0A,
+	.tset	= 0,
+};
+
+static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
+	.nand_timings = &nhk8815_nand_timings,
+	.partitions = nhk8815_partitions,
+	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
+	.width = FSMC_NAND_BW8,
 };
 
 static struct platform_device nhk8815_nand_device = {
-	.name		= "nomadik_nand",
-	.dev		= {
-		.platform_data = &nhk8815_nand_data,
+	.name = "fsmc-nand",
+	.id = -1,
+	.resource = nhk8815_nand_resources,
+	.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
+	.dev = {
+		.platform_data = &nhk8815_nand_platform_data,
 	},
-	.resource	= nhk8815_nand_resources,
-	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
 };
 
 /* These are the partitions for the OneNand device, different from above */
@@ -176,6 +179,10 @@ static struct platform_device nhk8815_onenand_device = {
 	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
 };
 
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)	(NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)	(NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
 static void __init nhk8815_onenand_init(void)
 {
 #ifdef CONFIG_MTD_ONENAND
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
deleted file mode 100644
index 8c2c05183685..000000000000
--- a/arch/arm/mach-nomadik/include/mach/fsmc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
-
-#ifndef __ASM_ARCH_FSMC_H
-#define __ASM_ARCH_FSMC_H
-
-#include <mach/hardware.h>
-/*
- * Register list
- */
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-/* PC-card and NAND:
- * PCR = control register
- * PMEM = memory timing
- * PATT = attribute timing
- * PIO = I/O timing
- * PECCR = ECC result
- */
-#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
-#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
-#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
-#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
-#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
-
-#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 12f3994c43db..8b204ae69002 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -250,6 +250,18 @@ static struct resource rtc_resources[] = {
  */
 static struct resource fsmc_resources[] = {
 	{
+		.name  = "nand_addr",
+		.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE,
+		.end   = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_ALE + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "nand_cmd",
+		.start = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE,
+		.end   = U300_NAND_CS0_PHYS_BASE + PLAT_NAND_CLE + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
 		.name  = "nand_data",
 		.start = U300_NAND_CS0_PHYS_BASE,
 		.end   = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
@@ -1492,8 +1504,6 @@ static struct fsmc_nand_platform_data nand_platform_data = {
 	.nr_partitions = ARRAY_SIZE(u300_partitions),
 	.options = NAND_SKIP_BBTSCAN,
 	.width = FSMC_NAND_BW8,
-	.ale_off = PLAT_NAND_ALE,
-	.cle_off = PLAT_NAND_CLE,
 };
 
 static struct platform_device nand_device = {