Merge branch 'pm-upstream/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-stable

11 files changed, 301 insertions, 80 deletions

diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e43a1e..f41a6f57cd12 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 000000000000..187cb58345c0
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb5..e26af837510b 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -51,6 +51,7 @@
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
 #define OVERO_GPIO_BT_NRESET	164
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93bf86d3..f3c91a1ca391 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf76678..21201cd4117b 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db1025562fb0..528dbdc26e23 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
 			  WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	u32 l;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5ed8be..488d595d8e4b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+#ifdef CONFIG_SUSPEND
 	u32 saved_state;
+#endif
 	struct list_head node;
 };
 
@@ -293,6 +295,9 @@ out:
 	local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -321,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
 	/* Restore next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
 			printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@ restore:
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
 	int ret = 0;
 
-	switch (state) {
+	switch (suspend_state) {
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@ static void omap3_pm_finish(void)
 	enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	omap_uart_enable_irqs(0);
+	return 0;
+}
+
+static void omap3_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+	omap_uart_enable_irqs(1);
+	return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap3_pm_begin,
+	.end		= omap3_pm_end,
 	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
 	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
@@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
 	return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
 	int ret;
@@ -692,7 +733,9 @@ int __init omap3_pm_init(void)
 	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
 					 omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c0bea75f13f8..ce22344b94e7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@ struct omap_uart_state {
 
 	struct plat_serial8250_port *p;
 	struct list_head node;
+	struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
 	{
 		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
@@ -227,6 +239,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 	clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+	/* Clear wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v &= ~uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are cleared */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
 					  int enable)
 {
@@ -256,6 +302,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+	if (device_may_wakeup(&uart->pdev.dev))
+		omap_uart_enable_wakeup(uart);
+	else
+		omap_uart_disable_wakeup(uart);
+
 	if (!uart->clocked)
 		return;
 
@@ -302,7 +353,6 @@ void omap_uart_resume_idle(int num)
 			/* Check for normal UART wakeup */
 			if (__raw_readl(uart->wk_st) & uart->wk_mask)
 				omap_uart_block_sleep(uart);
-
 			return;
 		}
 	}
@@ -356,16 +406,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	u32 v;
 	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
-	uart->timeout = sleep_timeout;
+	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
 	mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -423,76 +470,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	/* Set wake-enable bit */
-	if (uart->wk_en && uart->wk_mask) {
-		v = __raw_readl(uart->wk_en);
-		v |= uart->wk_mask;
-		__raw_writel(v, uart->wk_en);
-	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v;
-
-		v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
-
 	p->flags |= UPF_SHARE_IRQ;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+	int ret;
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (enable)
+			ret = request_irq(uart->p->irq, omap_uart_interrupt,
+				IRQF_SHARED, "serial idle", (void *)uart);
+		else
+			free_irq(uart->p->irq, (void *)uart);
+	}
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
-	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
+
+	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct omap_uart_state *uart;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
 		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
-	sleep_timeout = value * HZ;
-	list_for_each_entry(uart, &uart_list, node) {
-		uart->timeout = sleep_timeout;
-		if (uart->timeout)
-			mod_timer(&uart->timer, jiffies + uart->timeout);
-		else
-			/* A zero value means disable timeout feature */
-			omap_uart_block_sleep(uart);
-	}
+
+	uart->timeout = value * HZ;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		/* A zero value means disable timeout feature */
+		omap_uart_block_sleep(uart);
+
 	return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM,
+			.dev			= {
+				.platform_data	= serial_platform_data0,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM1,
+			.dev			= {
+				.platform_data	= serial_platform_data1,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM2,
+			.dev			= {
+				.platform_data	= serial_platform_data2,
+			},
+		},
 	},
 };
 
 void __init omap_serial_init(void)
 {
-	int i, err;
+	int i;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -506,14 +578,12 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
-	if (cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-			serial_platform_data[i].irq += 32;
-	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
 		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+		struct plat_serial8250_port *p = dev->platform_data;
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -541,20 +611,21 @@ void __init omap_serial_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add(&uart->node, &uart_list);
+		list_add_tail(&uart->node, &uart_list);
+
+		if (cpu_is_omap44xx())
+			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-	}
-
-	err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-	if (!err)
-		err = sysfs_create_file(&serial_device.dev.kobj,
-					&sleep_timeout_attr.attr);
-#endif
 
+		if (WARN_ON(platform_device_register(pdev)))
+			continue;
+		if ((cpu_is_omap34xx() && uart->padconf) ||
+		    (uart->wk_en && uart->wk_mask)) {
+			device_init_wakeup(dev, true);
+			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+		}
+	}
 }
-
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af64066..1868c0d8f9b5 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
 	/* Ensure desired rate is within allowed range.  Some govenors
 	 * (ondemand) will just pass target_freq=0 to get the minimum. */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
 
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f0b71680ec52..00940dc6bb50 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1292,6 +1292,7 @@ static void gpio_mask_irq(unsigned int irq)
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 
 	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1299,6 +1300,11 @@ static void gpio_unmask_irq(unsigned int irq)
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	struct irq_desc *desc = irq_to_desc(irq);
+	u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02d1527..def0529c75eb 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif