Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...

14 files changed, 10 insertions, 630 deletions

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 8d26ce6813bb..03f654d55eff 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -47,25 +47,25 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
 #include <plat/hdmi.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8372a..000000000000
--- a/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af5286a3e..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f77c40..000000000000
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/arch/arm/plat-samsung/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae18582..000000000000
--- a/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e4429bc7..000000000000
--- a/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e767a19..000000000000
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d31711944..000000000000
--- a/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d4c2e..000000000000
--- a/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa93a4..000000000000
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index ceba18d23a5a..000000000000
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	int num_cs;
-	int (*cfg_gpio)(void);
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @cfg_gpio: Pointer to gpio setup function.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(void);
-extern int s3c64xx_spi1_cfg_gpio(void);
-extern int s3c64xx_spi2_cfg_gpio(void);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e0fc2..000000000000
--- a/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288a509..000000000000
--- a/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbefc3f2..000000000000
--- a/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */