summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-samsung
diff options
context:
space:
mode:
authorThomas Abraham <thomas.abraham@linaro.org>2012-07-13 07:15:14 +0900
committerKukjin Kim <kgene.kim@samsung.com>2012-07-13 15:23:48 +0900
commit1c20c200ef96c50b3075f71220c8c8bc018a93c8 (patch)
tree3625e8277a760ae16b0580bd6091a14ae036a9a2 /arch/arm/plat-samsung
parent4d0efdd5889b1c81a62aa07a47d3d55be4b65b61 (diff)
downloadblackbird-op-linux-1c20c200ef96c50b3075f71220c8c8bc018a93c8.tar.gz
blackbird-op-linux-1c20c200ef96c50b3075f71220c8c8bc018a93c8.zip
spi: s3c64xx: Remove the 'set_level' callback from controller data
The set_level callback in the controller data, which is used to configure the slave select line, cannot be supported when migrating the driver to device tree based discovery. Since all the platforms currently use gpio as the slave select line, this callback can be removed from the controller data and replaced with call to gpio_set_value in the driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Diffstat (limited to 'arch/arm/plat-samsung')
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c64xx-spi.h2
1 files changed, 0 insertions, 2 deletions
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index c818a7c18929..ceba18d23a5a 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -18,7 +18,6 @@ struct platform_device;
* @fb_delay: Slave specific feedback delay.
* Refer to FB_CLK_SEL register definition in SPI chapter.
* @line: Custom 'identity' of the CS line.
- * @set_level: CS line control.
*
* This is per SPI-Slave Chipselect information.
* Allocate and initialize one in machine init code and make the
@@ -27,7 +26,6 @@ struct platform_device;
struct s3c64xx_spi_csinfo {
u8 fb_delay;
unsigned line;
- void (*set_level)(unsigned line_id, int lvl);
};
/**
OpenPOWER on IntegriCloud