Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h

1 files changed, 7 insertions, 13 deletions

diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
index 683c466c0e6a..147459327601 100644
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ b/arch/arm/plat-samsung/setup-mipiphy.c
@@ -14,24 +14,18 @@
 #include <linux/spinlock.h>
 #include <mach/regs-clock.h>
 
-static int __s5p_mipi_phy_control(struct platform_device *pdev,
-				  bool on, u32 reset)
+static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
 {
 	static DEFINE_SPINLOCK(lock);
 	void __iomem *addr;
 	unsigned long flags;
-	int pid;
 	u32 cfg;
 
-	if (!pdev)
+	id = max(0, id);
+	if (id > 1)
 		return -EINVAL;
 
-	pid = (pdev->id == -1) ? 0 : pdev->id;
-
-	if (pid != 0 && pid != 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(pid);
+	addr = S5P_MIPI_DPHY_CONTROL(id);
 
 	spin_lock_irqsave(&lock, flags);
 
@@ -52,12 +46,12 @@ static int __s5p_mipi_phy_control(struct platform_device *pdev,
 	return 0;
 }
 
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
+int s5p_csis_phy_enable(int id, bool on)
 {
-	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
+	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
 }
 
 int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
 {
-	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
+	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
 }