ARM: SAMSUNG: Move pm-gpio into plat-samsung

Move the pm-gpio code into plat-samsung.

Note, this should be changed later to properly compile the 4bit code if
the 4bit settings are enabled.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

2 files changed, 0 insertions, 381 deletions

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index ea4a001f6793..ac12ba526f77 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_S3C_DMA)		+= dma.o
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # PWM support
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
deleted file mode 100644
index cfd326a8b693..000000000000
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ /dev/null
@@ -1,380 +0,0 @@
-
-/* linux/arch/arm/plat-s3c/pm-gpio.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON	(0x00)
-#define OFFS_DAT	(0x04)
-#define OFFS_UP		(0x08)
-
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon;
-
-	/* GPACON only has one bit per control / data and no PULLUPs.
-	 * GPACON[x] = 0 => Output, 1 => SFN */
-
-	/* first set all SFN bits to SFN */
-
-	gpcon = old_gpcon | gps_gpcon;
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* now set all the other bits */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
-};
-
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon, old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	/* restore GPIO pull-up settings */
-	__raw_writel(chip->pm_save[2], base + OFFS_UP);
-
-	/* Create a change_mask of all the items that need to have
-	 * their CON value changed before their DAT value, so that
-	 * we minimise the work between the two settings.
-	 */
-
-	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-
-	/* Write the new CON settings */
-
-	gpcon = old_gpcon & ~change_mask;
-	gpcon |= gps_gpcon & change_mask;
-
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* Now change any items that require DAT,CON */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
-};
-
-#ifdef CONFIG_ARCH_S3C64XX
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8)
-		chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
-	u32 old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-	return change_mask;
-}
-
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
-{
-	void __iomem *con = chip->base + (index * 4);
-	u32 old_gpcon = __raw_readl(con);
-	u32 gps_gpcon = chip->pm_save[index + 1];
-	u32 gpcon, mask;
-
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
-	gpcon = old_gpcon & ~mask;
-	gpcon |= gps_gpcon & mask;
-
-	__raw_writel(gpcon, con);
-}
-
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon[2];
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpdat = chip->pm_save[2];
-
-	/* First, modify the CON settings */
-
-	old_gpcon[0] = 0;
-	old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
-	s3c_gpio_pm_4bit_con(chip, 0);
-	if (chip->chip.ngpio > 8) {
-		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
-	}
-
-	/* Now change the configurations that require DAT,CON */
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[1], base + OFFS_CON);
-	if (chip->chip.ngpio > 8)
-		__raw_writel(chip->pm_save[0], base - 4);
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[3], base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8) {
-		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[0], old_gpcon[1],
-			  __raw_readl(base - 4),
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-	} else
-		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[1],
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX */
-
-/**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->save == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->save(ourchip);
-}
-
-/**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void s3c_pm_save_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_save_gpio(ourchip);
-
-		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
-			  ourchip->chip.label,
-			  ourchip->pm_save[0],
-			  ourchip->pm_save[1],
-			  ourchip->pm_save[2],
-			  ourchip->pm_save[3]);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
-
-/**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->resume == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->resume(ourchip);
-}
-
-void s3c_pm_restore_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_resume_gpio(ourchip);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}